Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 743/778 | < Previous Page | 739 740 741 742 743 744 745 746 747 748 749 750  | Next Page >

• ZFS Recover from Faulted Pool State

  - by nickv2002

  I have a six disk ZFS raidz1 pool and had a recent failure requiring a disk replacement. No problem normally, but this time my server hardware died before I could do the replacement (but after and unrelated to the drive failure as far as I can tell). I was able to get another machine from a friend to rebuild the system, but in the process of moving my drives over I had to swap their cables around a bunch until I got the right configuration where the remaining 5 good disks were seen as online. This process seems to have generated some checksum errors for the pool/raidz. I have the 5 remaining drives set up now and a good drive installed and ready to take the place of the drive that died. However, since my pool state is FAULTED I'm unable to do the replacement. root@zfs:~# zpool replace tank 1298243857915644462 /dev/sdb cannot open 'tank': pool is unavailable Is there any way to recover from this error? I would think that having 5 of the 6 drives online would be enough to rebuild the right data, but that doesn't seem to be enough now. Here's the status log of my pool: root@zfs:~# zpool status tank pool: tank state: FAULTED status: One or more devices could not be used because the label is missing or invalid. There are insufficient replicas for the pool to continue functioning. action: Destroy and re-create the pool from a backup source. see: http://zfsonlinux.org/msg/ZFS-8000-5E scan: none requested config: NAME STATE READ WRITE CKSUM tank FAULTED 0 0 1 corrupted data raidz1-0 ONLINE 0 0 8 sdd ONLINE 0 0 0 sdf ONLINE 0 0 0 sdh ONLINE 0 0 0 1298243857915644462 UNAVAIL 0 0 0 was /dev/sdb1 sde ONLINE 0 0 0 sdg ONLINE 0 0 0 Update (10/31): I tried to export and re-import the array a few times over the past week and wasn't successful. First I tried: zpool import -f -R /tank -N -o readonly=on -F tank That produced this error immediately: cannot import 'tank': I/O error Destroy and re-create the pool from a backup source. I added the '-X' option to the above command to try to make it check the transaction log. I let that run for about 48 hours before giving up because it had completely locked up my machine (I was unable to log in locally or via the network). Now I'm trying a simple zpool import tank command and that seems to run for a while with no output. I'll leave it running overnight to see if it outputs anything.

  Read the article

• Expendable, Redundant, Easily recoverable

  - by MeIr

  I am desperate at this point, I have been looking for "Big storage" solution for a while on my own and I can't find anything that would suite my needs. But now push came to shove. Current situation: I have about 6TB data storage (already full) - Drobo. Yesterday Drobo died on me and it put me into bad situation - I can't recover my data without buying another Drobo. From extensive research online I realized that Drobo is not the safest bet and by now it seems very poor choice. I ordered new Drobo to try to get my data back, however I don't want to be in the same situation later and continuing using Drobo promises this event to re-occur. What I am looking for: 1) Inexpensive setup. 2) Dynamically extendable - add more drives and/or replace a drive with bigger capacity. 3) Redundant - setup against 1-3 drive failure, will depend on total number of drives. For the sake of argument let's assume for every 4 drives one should be able to fail without data loss. 4) Easy data recovery - let's say unforeseen happens, I would like to be able to recover information without buying new tools or replacements - example: new Drobo. 5) Should be USB or Network Attach Storage 6) No demand on speed. Doesn't have to be fast, I am not doing video editing on the setup. However if option exists, would be nice to have a decent speed. After thoughts: I reviewed few options and FreeNAS looks nice, but it doesn't have #2 - Dynamic extendability. There are work around with Pools but it seems a bit complicated and unnecessary. More over it seems like data safety is a big question - saw some horror stories. Please advise on what options I have and what seems like an optimal solution (if any). I don't care if it has to be Windows or Linux box or any other OS and/or software that has to run on top, but simple solution is more attractive. Thank you! P.S: Feel free to ignore "After thoughts".

  Read the article

• Weird nfs performance: 1 thread better than 8, 8 better than 2!

  - by Joe

  I'm trying to determine the cause of poor nfs performance between two Xen Virtual Machines (client & server) running on the same host. Specifically, the speed at which I can sequentially read a 1GB file on the client is much lower than what would be expected based on the measured network connection speed between the two VMs and the measured speed of reading the file directly on the server. The VMs are running Ubuntu 9.04 and the server is using the nfs-kernel-server package. According to various NFS tuning resources, changing the number of nfsd threads (in my case kernel threads) can affect performance. Usually this advice is framed in terms of increasing the number from the default of 8 on heavily-used servers. What I find in my current configuration: RPCNFSDCOUNT=8: (default): 13.5-30 seconds to cat a 1GB file on the client so 35-80MB/sec RPCNFSDCOUNT=16: 18s to cat the file 60MB/s RPCNFSDCOUNT=1: 8-9 seconds to cat the file (!!?!) 125MB/s RPCNFSDCOUNT=2: 87s to cat the file 12MB/s I should mention that the file I'm exporting is on a RevoDrive SSD mounted on the server using Xen's PCI-passthrough; on the server I can cat the file in under seconds ( 250MB/s). I am dropping caches on the client before each test. I don't really want to leave the server configured with just one thread as I'm guessing that won't work so well when there are multiple clients, but I might be misunderstanding how that works. I have repeated the tests a few times (changing the server config in between) and the results are fairly consistent. So my question is: why is the best performance with 1 thread? A few other things I have tried changing, to little or no effect: increasing the values of /proc/sys/net/ipv4/ipfrag_low_thresh and /proc/sys/net/ipv4/ipfrag_high_thresh to 512K, 1M from the default 192K,256K increasing the value of /proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_max to 1M from the default of 128K mounting with client options rsize=32768, wsize=32768 From the output of sar -d I understand that the actual read sizes going to the underlying device are rather small (<100 bytes) but this doesn't cause a problem when reading the file locally on the client. The RevoDrive actually exposes two "SATA" devices /dev/sda and /dev/sdb, then dmraid picks up a fakeRAID-0 striped across them which I have mounted to /mnt/ssd and then bind-mounted to /export/ssd. I've done local tests on my file using both locations and see the good performance mentioned above. If answers/comments ask for more details I will add them.

  Read the article

• Repeated requests on our server?

  - by pitty.platsch

  I encountered something strange in the access log of our Apache server which I cannot explain. Requests for webpages that I or my colleagues do from the office's Windows network get repeated by another IP (that we don't know) a couple of seconds later. The user agent repeating our requests is Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2) Has anyone an idea? Update: I've got some more information now. The referrer of the replicate is set to the URL I requested before and it's not the exact same request as the protocol version is changed from 'HTTP/1.1' to 'HTTP/1.0'. The IP is not just one, it's just one of a subnet (80.40.134.*). It's just the first request to a resource that's get repeated, so it seems the "spy" is building up some kind of cache of visited places. The repeater is also picky. I tried randomly URLs with different HTTP status codes and different file patterns. 301s and 200s are redone, 404s not. Image extensions seem to be ignored. While doing my tests I discovered that this behavior seems to be common as I found other clients visiting just after the first requests: 66.249.73.184 - - [25/Oct/2012:10:51:33 +0100] "GET /foobar/ HTTP/1.1" 200 10952 "-" "Mediapartners-Google" 50.17.125.180 - - [25/Oct/2012:10:51:33 +0100] "GET /foobar/ HTTP/1.1" 200 41312 "-" "Mozilla/5.0 (compatible; proximic; +http://www.proximic.com/info/spider.php)" I wasn't aware about this practice, so I don't see it that much as a threat anymore. I still want to find out who this is, so any further help is appreciated. I'll try later if this also happens if I query some other server where I have access to the access logs and will update here then.

  Read the article

• How to store data on a machine whose power gets cut at random

  - by Sevas

  I have a virtual machine (Debian) running on a physical machine host. The virtual machine acts as a buffer for data that it frequently receives over the local network (the period for this data is 0.5s, so a fairly high throughput). Any data received is stored on the virtual machine and repeatedly forwarded to an external server over UDP. Once the external server acknowledges (over UDP) that it has received a data packet, the original data is deleted from the virtual machine and not sent to the external server again. The internet connection that connects the VM and the external server is unreliable, meaning it could be down for days at a time. The physical machine that hosts the VM gets its power cut several times per day at random. There is no way to tell when this is about to happen and it is not possible to add a UPS, a battery, or a similar solution to the system. Originally, the data was stored on a file-based HSQLDB database on the virtual machine. However, the frequent power cuts eventually cause the database script file to become corrupted (not at the file system level, i.e. it is readable, but HSQLDB can't make sense of it), which leads to my question: How should data be stored in an environment where power cuts can and do happen frequently? One option I can think of is using flat files, saving each packet of data as a file on the file system. This way if a file is corrupted due to loss of power, it can be ignored and the rest of the data remains intact. This poses a few issues however, mainly related to the amount of data likely being stored on the virtual machine. At 0.5s between each piece of data, 1,728,000 files will be generated in 10 days. This at least means using a file system with an increased number of inodes to store this data (the current file system setup ran out of inodes at ~250,000 messages and 30% disk space used). Also, it is hard (not impossible) to manage. Are there any other options? Are there database engines that run on Debian that would not get corrupted by power cuts? Also, what file system should be used for this? ext3 is what is used at the moment. The software that runs on the virtual machine is written using Java 6, so hopefully the solution would not be incompatible.

  Read the article

• How to find the process(es) which are hogging the machine

  - by Aaron Digulla

  Scenario: All of a sudden, my computer feels sluggish. Mouse moves but windows take ages to open, etc. uptime says the load is 7.69 and raising. What is the fastest way to find out which process(es) are the cause of the load? Now, "top" and similar tools isn't the answer because they either show CPU or memory usage but not both at the same time. What I need is the single command which I might be able to type as it happens - something that will figure out any of System is trying to swap 8GB of RAM to disk because process X ... or process X seeks all over the disk or process X uses 400% CPU" So what I'm looking for is iostat, htop/atop and similar tools run into one with an output like this: 1235 cp - Disk trashing 87 chrome - Uses 2&nbsp;GB of RAM 137 nfs_bench - Uses 95% of the network bandwidth I don't want a tool that gives me some numbers which I can analyze but a tool that tells me exactly which process causes the current load. Assume that the user in front of the keyboard barely knows how to write "process", but the user is quickly overwhelmed when it comes to "resident size", "virtual memory" or "process life cycle". My argument goes like this: A user notices a problem. There can be thousands of reasons ... well, almost :-) The user wants to know the source of the problem. The current solutions give me lots of numbers, and I need to know what these numbers mean. What I'm looking for is a meta tool. 99% of the data is irrelevant to the problem. So what the tool should do is look for processes which hog some resource and list only those along with "this process needs a lot of CPU, this produces many IRQs, this process allocates a lot of RAM (and it's still growing)". This will be a relatively short list. It will be much more simple for someone new to this to locate the culprit from this list than from the output of, say, htop which gives me about 5000 numbers but requires me to fold multi-threaded processes myself (I have 50 lines which say VIRT 2750M but only 16 GB of RAM - the machine ought to swap itself to death but of course, this is a misinterpretation of the data that can happen quickly).

  Read the article

• What is the difference between running a Windows service vs. running through shell?

  - by Zack

  I am trying to troubleshoot an issue on a Windows 2008 server where running attempting to connect to a "Timberline Data Source" ODBC driver crashes if the call is in a "service" context, but succeeds if the call is initiated manually in a Remote Desktop session. I have set the service to run as my user. I'm wondering if, all else being equal (user, machine, etc), are there any fundamental security/environment differences between running a process as a service vs manually? --- Implementation Details --- In case it is helpful for anyone, I had a system that started as an attempt to connect to a Timberline Database using ODBC and a Python CGI script called via IIS 7. The script itself works fine, however, as soon as I attempt to perform the ODBC connect function, the script crashes without throwing an exception. The script was able to connect fine when executed via command line. The same thing happened when using a C#/.net service, attempting to run via Apache, Windows Scheduler or even a 3rd party scheduling tool. With the last option (the 3rd party scheduling tool, pycron) I set the service up log in as my user and had the same issue (I confirmed via Task Manager that the process running user was, in fact, me). It just doesn't make sense to me why a service, which should be running as my user, appears to still be operating in a different security context or environment. Also, if it's important, the Timberline database is referenced by computer name on the network ("\\timberline-server\Timberline Office\Accounts\AT" or something to that effect) I also realized that, as Joel pointed out, the server DOES have a mapped drive ("Y:" which is mapped to "\\timberline-server\Timberline Office") The DSN is set up at the "System DSN" level which, according to the ODBC Administration Tool, means that the DSN is available to users and services Since I'm not allowed to answer this question yet, I'll post the solution that I arrived on: As Joel Coel mentioned, there actually was a mapped drive scenario. I didn't realize this because the DSN specified a path using UNC. However, it seems as though the actual Timberline Driver referred to a mapped drive. Since services don't start with the mapped drive, I was forced to add the drive mapping code into my service. Since it was written in python, I used code from a Stackoverflow answer that was able to map the drive on the fly.

  Read the article

• Remote access to internal machine (ssh port-forwarding)

  - by MacUsers

  I have a server (serv05) at work with a public ip, hosting two KVM guests - vtest1 & vtest2 - in two different private network - 192.168.122.0 & 192.168.100.0 - respectively, this way: [root@serv05 ~]# ip -o addr show | grep -w inet 1: lo inet 127.0.0.1/8 scope host lo 2: eth0 inet xxx.xxx.xx.197/24 brd xxx.xxx.xx.255 scope global eth0 4: virbr1 inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr1 6: virbr0 inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 # [root@serv05 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr1 xxx.xxx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 xxx.xxx.xx.62 0.0.0.0 UG 0 0 0 eth0 I've also setup IP FORWARDing and Masquerading this way: iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface virbr0 -j ACCEPT All works up to this point. If I want to remote access vtest1 (or vtest2) first I ssh to serv05 and then from there ssh to vtest1. Is there a way to setup a port forwarding so that vtest1 can be accessed directly from the outside world? This is what I probably need to setup: external_ip (tcp port 4444) -> DNAT -> 192.168.122.50 (tcp port 22) I know it's easily do'able using a SOHO router but can't figure out how can I do that on a Linux box. Any help form you guys?? Cheers!! Update: 1 Now I've made ssh to listen to both of the ports: [root@serv05 ssh]# netstat -tulpn | grep ssh tcp 0 0 xxx.xxx.xx.197:22 0.0.0.0:* LISTEN 5092/sshd tcp 0 0 xxx.xxx.xx.197:4444 0.0.0.0:* LISTEN 5092/sshd and port 4444 is allowed in the iptables rules: [root@serv05 sysconfig]# grep 4444 iptables -A PREROUTING -i eth0 -p tcp -m tcp --dport 4444 -j DNAT --to-destination 192.168.122.50:22 -A INPUT -p tcp -m state --state NEW -m tcp --dport 4444 -j ACCEPT -A FORWARD -i eth0 -p tcp -m tcp --dport 4444 -j ACCEPT But I'm getting connection refused: maci:~ santa$ telnet serv05 4444 Trying xxx.xxx.xx.197... telnet: connect to address xxx.xxx.xx.197: Connection refused telnet: Unable to connect to remote host Any idea what's I'm still missing? Cheers!!

  Read the article

• debugging JBoss 100% CPU usage

  - by Nate

  We are using JBoss to run two of our WARs. One is our web app, the other is our web service. The web app accesses a database on another machine and makes requests to the web service. The web service makes JMS requests to other machines, aggregates the data, and returns it. At our biggest client, about once a month the JBoss Java process takes 100% of all CPUs. The machine running JBoss has 8 CPUs. Our web app is still accessible during this time, however pages take about 3 minutes to load. Restarting JBoss restores everything to normal. The database machine and all the other machines are fine, only the machine running JBoss is affected. Memory usage is normal. Network utilization is normal. There are no suspect error messages in the JBoss logs. I have set up a test environment as close as possible to the client's production environment and I've done load testing with as much as 2x the number of concurrent users. I have not gotten my test environment to replicate the problem. Where do we go from here? How can we narrow down the problem? Currently the only plan we have is to wait until the problem occurs in production on its own, then do some debugging to determine the cause. So far people have just restarted JBoss when the problem occurred to minimize down time. Next time it happens they will get a developer to take a look. The question is, next time it happens, what can be done to determine the cause? We could setup a separate JBoss instance on the same box and install the web app separately from the web service. This way when the problem next occurs we will know which WAR has the problem (assuming it is our code). This doesn't narrow it down much though. Should I enable JMX remote? This way the next time the problem occurs I can connect with VisualVM and see which threads are taking the CPU and what the hell they are doing. However, is there a significant down side to enabling JMX remote in a production environment? Is there another way to see what threads are eating the CPU and to get a stacktrace to see what they are doing? Any other ideas? Thanks!

  Read the article

• Can't install .NET framework 4.0 on Windows XP professional version 2002 SP3 (OS bug?)

  - by that guy

  .NET framework 4.0 install fails on Windows XP professional version 2002 SP3: I tried to run setup using "run as..." to make sure the admin rights are used ("protect my computer..." tick was deselected of course). I tried everything: installing using online/offline setup, windows update. install goes a little and then "rolls back" and says: Installation did not succeed .NET Framework 4 has not been installed because: Fatal error during installation. for more information about this problem, see the log file. the full log: http://pastebay.net/1433771 Any ideas? EDIT1: I have found this in the log: "BlockIf: You must install the 32-bit Windows Imaging Component (WIC) before you run Setup. Please visit the Microsoft Download Center to install WIC, and then rerun Setup...." So I found it, and launched "wic_x86_enu.exe" - but it said: WIC Setup error Newer version of update is already on the system. I have already installed: .NET framewrok 2.0 SP2 .NET framewrok 3.0 SP2 .NET framewrok 3.5 SP1 but I need 4.0 . EDIT2: another attempt and it's log. (this time better copy of log file): http://pastebin.com/gmGfbM9a (copy to notepad and save as .htm and open with internet browser). I have tried all the solutions I could find - and nothing helped. I have found something weird: when I formatted the hard drive and installed windows xp again - the .NET framework 4.0 installed ok, but when I plugged my 100Mbit internet cable - the operating system kind off "locked itself" and the bug returned - I could no longer install .NET framework 4.0 again. There was no reason for that to happen, for example I have windows server 2003 in local network, but I don't have active directory enabled on it or anything like that - the server just has some folders shared and thats all (all server's "features" are default). I had the second pc with the same problem - with XP on it too. This seems like the bug of Operating System to me. I couldn't find what was causing the problem. After many days I gave up: backuped everything, formatted HDD and installed Windows 7 professional 64bit. .NET framework 4.0 installed with no problem on it.

  Read the article

• Local dns for testing websites using mobile devices

  - by Morpheu5

  Hi. I have no idea where to start from so sorry in advance if this topic has already been discussed. I usually develop web sites using my laptop as a development server, and recently I needed to test a web site using various mobile devices that can connect via wifi. Having no real AP, I set up a ad-hoc network using my laptop's wireless card and the devices can correctly browse the Internet and access the laptop's web server. The setup is as follows: subnet: 192.168.1.0/24 gateway to the Internet (wired adsl router/modem): 192.168.1.1 laptop: 192.168.1.64 (eth0, wired if connected to the gateway) and 192.168.1.32 (eth1, wifi if somewhat bridged to eth0) mobile devices (same for all, I only use one of them at any time for simplicity): 192.168.1.11 with default gw 192.168.1.1 Now, if I open either 192.168.1.32 or 192.168.1.64 from the mobile devices, I correctly get the default host of my Apache configuration. However I usually work with virtual hosts for many practical reasons, one of which being Drupal's peculiar implementation of multi-sites. For those who don't know how this works, Drupal takes the request's hostname and searches into its sites/ subdirectories for an appropriate configuration file. So, for example, suppose I request www.example.com, then Drupal would search for a config file in the following directories: sites/www.example.com/ sites/example.com/ sites/com/ sites/default/ So I decided to adopt the following style of virtual hosts: if the website I'm working on will be accessible using www.example.com I set up a sites/www.example.com/ directory and create a virtual host for local.www.example.com so Drupal have no trouble finding it. I've been told this is suboptimal from a dns point of view since I'd have to create an authoritative entry for example.com and turn Bind on only when I'm supposed to access the local copy, which is weird. However, if this is the only path I can follow, I still have some problems with Bind's configuration, as I couldn't find any guide that tells me in a clear, noob-friendly way, how to set up such an entry. On the other hand, I was wondering if I could set up an authoritative entry for local, so I could access www.example.com.local and tell in some way (which I don't even know if this is possible) Apache to put www.example.com instead of www.example.com.local in the relevant environment variable. Anyway, I have a last problem, sort of: when I launch Bind in debug mode with high verbosity, and make 192.168.1.32 as the primary dns for the devices, the output doesn't say anything about requests being made from the devices to Bind, so I'm not even sure it comes into play. As you can see, I'm a complete noob at these matters, but I'm eager to learn, so any help/pointer will be appreciated.

  Read the article

• Reliable file copy (move) process - mostly Unix/Linux

  - by mfinni

  Short story : We have a need for a rock-solid reliable file mover process. We have source directories that are often being written to that we need to move files from. The files come in pairs - a big binary, and a small XML index. We get a CTL file that defines these file bundles. There is a process that operates on the files once they are in the destination directory; that gets rid of them when it's done. Would rsync do the best job, or do we need to get more complex? Long story as follows : We have multiple sources to pull from : one set of directories are on a Windows machine (that does have Cygwin and an SSH daemon), and a whole pile of directories are on a set of SFTP servers (Most of these are also Windows.) Our destinations are a list of directories on AIX servers. We used to use a very reliable Perl script on the Windows/Cygwin machine when it was our only source. However, we're working on getting rid of that machine, and there are other sources now, the SFTP servers, that we cannot presently run our own scripts on. For security reasons, we can't run the copy jobs on our AIX servers - they have no access to the source servers. We currently have a homegrown Java program on a Linux machine that uses SFTP to pull from the various new SFTP source directories, copies to a local tmp directory, verifies that everything is present, then copies that to the AIX machines, and then deletes the files from the source. However, we're finding any number of bugs or poorly-handled error checking. None of us are Java experts, so fixing/improving this may be difficult. Concerns for us are: With a remote source (SFTP), will rsync leave alone any file still being written? Some of these files are large. From reading the docs, it seems like rysnc will be very good about not removing the source until the destination is reliably written. Does anyone have experience confirming or disproving this? Additional info We will be concerned about the ingestion process that operates on the files once they are in the destination directory. We don't want it operating on files while we are in the process of copying them; it waits until the small XML index file is present. Our current copy job are supposed to copy the XML file last. Sometimes the network has problems, sometimes the SFTP source servers crap out on us. Sometimes we typo the config files and a destination directory doesn't exist. We never want to lose a file due to this sort of error. We need good logs If you were presented with this, would you just script up some rsync? Or would you build or buy a tool, and if so, what would it be (or what technologies would it use?) I (and others on my team) are decent with Perl.

  Read the article

• Bridging and iptables SNAT conflict

  - by sad_admin

  Hello I am working on a setup here and have it working with one minor exception. Devices on one side of my bridge aren't getting SNAT'd to the Internet. The Diagram / Overview: Primary_Network (Site_A) | | Internet ------- Linux_Bridge_GW (GW) | | Secondary/CoLo Site (Site_B) Here is the setup: 1.) Site_A has all the production servers and workstations. 2.) Site_B has a set of servers that we would like to fail-over to and also serve our internet facing services from. 3.) GW has two interfaces that are trunked and carrying the appropriate VLAN traffic (allow layer-2 propagation of traffic between sites) //this all works perfectly fine. 4.) The problem that is being encountered is, hosts from Site_B have their default GW at Site_A (same subnet) GW does not have IPs on the VLANs that are being passed. 5.) All hosts at Site_A can reach the Internet without problem. 6.) GW has an addresses on a subnet that is ONLY for Internet destined traffic. (This was done so that Websense would not have to parse unnecessary traffic. We use this VLAN as the monitor port's source on the switch where Websense is sitting). What I think is happening: 1.) Packet/Frame comes in on physdev at Site_B destined for Internet. 2.) Kernel sees packet, and forwards it out the other side of the bridge to that host's default GW. 3.) Site_A (containing core-network's Default-GW) sees that packet is destined for a host it doesn't know about, so it sends it to it's default GW (the linux bridge, since it's Internet bound). 4.) The kernel says "Hey, I've seen you before" and therefore doesn't do SNAT'ing on the packet and sends it out to the Internet where it's black-holed. Why I think it's happening: 1.) A tcpdump on the internet facing NIC shows the packet leaving the interface with the private address as it's source. What I would like: 1.) Have the packet SNAT'd. 2.) Something like the below would be awesome a.) packet comes in from Site_B b.) kernel sees that the packet is NOT destined for itself or any private address c.) kernel says "OK, well since you're destined for the Internet I'm going to send you out this interface rather than forward you to your normal default GW that's WAAAY over there." d.) packet comes in from internet and is sent out the appropriate bridge physdev depending on which site the host it's destined for is at. Thanks for any assistance or guidance that you are willing to offer. Best Regards, Sad Admin

  Read the article

• Need help troubleshooting highly variable ping times

  - by Elliot.Bradshaw

  I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

  Read the article

• Remote Debian System Preventing Logon

  - by choobablue

  I have a dozen or so single board computers on a network running Debian (squeeze) and access them via ssh (ssh server is dropbear). To give an idea of the hardware of these computers they're 1.2 GHz x86 processors, 1GB of RAM and 4GB flash drives formatted as ext2 (I avoided ext3 to prevent the added flash write stress from journaling), there is also a swap partition on the drive. Normally the setup I'm using works great and I can access all the computers. Every once in a while one will prevent access. What happens is I try to connect via ssh (putty) and it gives me the login prompt, I enter the username and password and it responds 'Access Denied' and it will also refuse any public key in ~/.ssh/authorized_keys. The credentials are correct as they worked previously. The computer responds to pings and putty recognizes the server public key, which implies to me the system is still running. Restarting the server fixes the problem and I can log in again. (I tried a temporary fix of putting shutdown -r now in the root crontab but this doesn't seem to reliably be run once the hang happens) Once I restart however there doesn't seem to be any information in any of the system logs to indicate what happened, the logs are simply empty for that time period, as if the system had crashed. There is some custom software running on the system which appears to stop working (which is why I wanted to ssh to begin with). I'm assuming that this program is the source of the problems but I'm unsure of how it would cause it and how to debug what is happening. The most likely explanation I can think of is that there is a memory leak in the other program that then prevents dropbear from spawning a new login shell (and crontab from executing shutdown) as there is not enough free memory. But looking at memory usage of the other (working) computers there doesn't seem to be any meaningful increase in memory to indicate a leak (unless it's a very big, fast acting and rare leak). I would think that when the OS ran out of memory it would restart the system or kill processes (the Linux kernel restarts right?). The other thing I wonder about is if the fact that they are running off a flash drive could have some effect, especially the swap partition (which I think I should remove to prevent wear of the flash), but the flash drives are young (~1 month) and I don't think that wear would be a factor yet. Does anybody have an idea of what could cause these symptoms, if it could be done by a memory leak, or something else I haven't thought of. And does anybody know of a method to try to debug the problem and find out more information about what's going wrong?

  Read the article

• Windows Update and IE fail to connect, but Chrome fine?

  - by I Gottlieb

  Out of ideas on this one. (Running Windows Vista.) I have a program that accesses the internet to retrieve financial market data. One day it tells me that it can't log in -- timeout error. I check the documentation and it says must have a working copy of IE browser installed. I check IE (have IE9) and sure enough -- it just spins. No error message, not timeout, no 'try later' -- just spins -- as far as I can tell, indefinitely. Any page, any address. Even access to a localhost site just spins. Chrome works fine. So does another program I have that fetches market data. Windows 'diagnose and repair' says my internet connection is working fine. I tried uninstall/re-install of IE. Same spinning. I tried to install Windows Updates, and guess what? I can't. I comes up with error 80072efd; checked documentation for the error and it says I should check firewall blockage. Thing is, the only firewall I have is Windows Firewall, and obviously it wouldn't be blocking Windows Update. In contrast, Windows 'Help' in all programs has no problem accessing the Internet. I had a filter on the internet connection, and this was updated just prior to first appearance of the problem. But I uninstalled the filter entirely (official, with passwd from the company's service rep) -- and no difference. I'm guessing that a high level Windows network service file is corrupted -- used only by MS programs and their ilk, but how do I find it? I'd like to avoid having to do a clean install of Windows. Much obliged for any insight. IG Ramhound -- Thanks for reply. I'm familiar with virtual machines as in e.g. JVM or an emulator for an alternative architecture or (theoretical) Turing Machine equivalence. But I'm not familiar with the way you're using the term. Please clarify -- what one needs for this VM 'test' and why you expect it will provide an advantage of insight into the problem. And what sort of 'configuration issue' are you referring to? IG

  Read the article

• Migrating Split Access Database from one domain to another (not working, details in Q)

  - by Expo_Rob

  Some background: I'm a programmer, not a network administrator, who has been asked to migrate some accounting software (Integrated Office Accounting version 3.2) from an existing domain (OLD_NETWORK) to a new domain (NEW_NETWORK). No-body at the office knows how it works under the hood. It is a split Access 2000 database with the back-end shared and on a file server (which is also the DC) using mapped drives. The DC is NT Server 4 SP 6. The new server is server 2003. The two networks are running independently (ie: two computers on each desk). I have been able to get new computers set up on NEW_NETWORK and working with the IOA software just perfectly but for one problem: The company here uses other entirely separate databases which access the tables IOA maintains (specifically the 'customers' table) via links. To switch between these systems, you press F11 then File-Open the appropriate database and away you go (this is necessary to maintain the permissions that the IOA system uses to protect the customers table). The entire database is Access 2000, the links go to other Access databases, SQL-Server is not involved in any way, nor is a migration to SQL server likely. If I can't migrate anything over, everything will stay as it is, and the NEW_NETWORK computers will not be used. The problem: When I try and update these seperate databases (I shall call one "BANK_ACCOUNT", but the name does not matter), it says "this recordset cannot be updated". It also will sometimes not pull information out of the 'customers' table (ie: date_entered) when looking at a report of everyone who opened a bank account on a certain day (ie: today). I have tried: Giving 'everyone' full control via. shared directory permissions Giving 'everyone' full control on a file system level Checking the permissions within Access (everyone has full read/write on all tables) Copying the entire server contents from one file server to another (ie: xcopy everything) Copying the entire local client files from one computer to another, putting them in the exact same position in the file system, with the same permissons (or full control to 'everyone'). Running as an Administrator Taking one of the NEW_NETWORK computers, having it join OLD_NETWORK and run the software (direct copy from a working system with identical drive mappings), this did not work Weeping openly My Question: Is there anything else I can try? (sorry for this being so long)

  Read the article

• Glassfish JSF/EAR Apache 2.2 proxy_ajp_mod Referred Content Missing (images/links/etc)

  - by BillR

  Full disclosure: Since this seems to be more of a configuration issue, I deleted this from Stack (where it wasn't getting any response) and reposted here. The problem is how to change the requestContextPath served up by Glassfish behind mod_proxy_ajp. The site/app runs fine if connecting directly to Glassfish port 8080 which is ultimately not what I want to do. So I need help with configuration for my servers and jsf deployment. I can see the issue but don't know how to resolve it. It has to do with the requestContextPath. Simply put, Apache directs to http://mysite.com/welcome.xhtml which is correct and what I want, but the page is minus the images and styles. The issue is Glassfish itself is still pointing to http://mysite.com/myapp/*. So all links it serves in the app/site still refer via the requestContextPath. That is the /myapp/* part of http://mysite.com/myapp/welcome.xhtml. When I look in the page source, images which are referred to with relative links still point to the requestContextPath (that is, /myapp/). This is fixable but a real pain. However with page links I can't set the relative path. If I hover over the contact page link I see http://mysite.com/myapp/contact.xhtml, and if I click it, I get 404. You can see the /myapp/ context path in the page source as well. If I type in the URL http://mysite.com/contact.xhtml I get the page minus its referred links (requestContextPath). On Apache ProxyPass / ajp://littlewalterserver:8009/myapp-web/ ProxyPassReverse / ajp://littlewalterserver:8009/myapp_Project-web On Glassfish asadmin create-network-listener --listenerport 8009 --protocol http-listener-1 --jkenabled true jk-connector I have tried going in to Glassfish and setting the web app as the default web app. I have changed the / in glassfish-web.xml (and checked to make sure it was the same in the EAR file). How can I get Glassfish to not include the /myapp/ context in the URLs? This has to be easy if you know how, but I don't know how, can someone help out here? Thanks.

  Read the article

• ERROR: Linux route add command failed: external program exited with error status: 4

  - by JohnMerlino

  A remote machine running fedora uses openvpn, and multiple developers were successfully able to connect to it via their client openvpn. However, I am running Ubuntu 12.04 and I am having trouble connecting to the server via vpn. I copied ca.crt, home.key, and home.crt from the server to my local machine to /etc/openvpn folder. My client.conf file looks like this: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote xx.xxx.xx.130 1194 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nogroup # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca ca.crt cert home.crt key home.key # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 But when I start server and look in /var/log/syslog, I notice the following error: May 27 22:13:51 myuser ovpn-client[5626]: /sbin/route add -net 10.27.12.1 netmask 255.255.255.252 gw 10.27.12.37 May 27 22:13:51 myuser ovpn-client[5626]: ERROR: Linux route add command failed: external program exited with error status: 4 May 27 22:13:51 myuser ovpn-client[5626]: /sbin/route add -net 172.27.12.0 netmask 255.255.255.0 gw 10.27.12.37 May 27 22:13:51 myuser ovpn-client[5626]: /sbin/route add -net 10.27.12.1 netmask 255.255.255.255 gw 10.27.12.37 And I am unable to connect to the server via openvpn: $ ssh [email protected] ssh: connect to host xxx.xx.xx.130 port 22: No route to host What may I be doing wrong?

  Read the article

• Google Rules for Retail

  - by David Dorf

  In the book What Would Google Do?, Jeff Jarvis outlines ten "Google Rules" that define how Google acts.  These rules help define how Web 2.0 businesses operate today and into the future.  While there's a chapter in the book on applying these rules to the retail industry, it wasn't very in-depth.  So I've decided to more directly apply the rules to retail, along with some notable examples of success.  The table below shows Jeff's Google Rule, some Industry Examples, and New Retailer Rules that I created. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} table.MsoTableGrid {mso-style-name:"Table Grid"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-priority:59; mso-style-unhide:no; border:solid black 1.0pt; mso-border-themecolor:text1; mso-border-alt:solid black .5pt; mso-border-themecolor:text1; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-border-insideh:.5pt solid black; mso-border-insideh-themecolor:text1; mso-border-insidev:.5pt solid black; mso-border-insidev-themecolor:text1; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Google Rule Industry Examples New Retailer Rule New Relationship Your worst customer is your friend; you best customer is your partner Newegg.com lets manufacturers respond to customer comments that are critical of the product, and their EggXpert site lets customers help other customers. Listen to what your customers are saying about you.  Convert the critics to fans and the fans to influencers. New Architecture Join a network; be a platform Tesco and BestBuy released APIs for their product catalogs so third-parties could create new applications. Become a destination for information. New Publicness Life is public, so is business Zappos and WholeFoods founders are prolific tweeters/bloggers, sharing their opinions and connecting to customers.  It's not always pretty, but it's genuine. Be transparent.  Share both your successes and failures with your customers. New Society Elegant organization Wet Seal helps their customers assemble outfits and show them off to each other.  Barnes & Noble has a community site that includes a bookclub. Communities of your customers already exist, so help them organize better. New Economy Mass market is dead; long live the mass of niches lululemon found a niche for yoga inspired athletic wear.  Threadless uses crowd-sourcing to design short-runs of T-shirts. Serve small markets with niche products. New Business Reality Decide what business you're in When Lowes realized catering to women brought the men along, their sales increased. Customers want experiences to go with the products they buy. New Attitude Trust the people and listen In 2008 Starbucks launched MyStartbucksIdea to solicit ideas from their customers. Use social networks as additional data points for making better merchandising decisions. New Ethic Be honest and transparent; don't be evil Target is giving away reusable shopping bags for Earth Day.  Kohl's has outfitted 67 stores with solar arrays. Being green earns customers' respect and lowers costs too. New Speed Life is live H&M and Zara keep up with fashion trends. Be prepared to pounce on you customers' fickle interests. New Imperatives Encourage, enable and protect innovation 1-800-Flowers was the first do sales in Facebook and an early adopter of mobile commerce.  The Sears Personal Shopper mobile app finds products based on a photo. Give your staff permission to fail so innovation won't be stifled. Jeff will be a keynote speaker at Crosstalk, our upcoming annual user conference, so I'm looking forward to hearing more of his perspective on retail and the new economy.

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Installing Lubuntu 14.04.1 fails, upowerd appears to hang

  - by Rantanplan

  On the live-CD session, I tried installing Lubuntu double clicking on the install button on the desktop. Here, the CD starts running but then stops running and nothing happens. Next, I rebooted and tried installing Lubuntu directly from the boot menu screen using forcepae again. After a while, I receive the following error message: The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again. Hitting Enter brings me to the desktop. For what errors should I search? And how? Thanks for some hints! On Lubuntu 12.04: uname -a Linux humboldt 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:45:51 UTC 2014 i686 i686 i386 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.5 LTS Release: 12.04 Codename: precise upowerd appears to hang: Aug 25 10:53:28 lubuntu kernel: [ 367.920272] INFO: task upowerd:3002 blocked for more than 120 seconds. Aug 25 10:53:28 lubuntu kernel: [ 367.920288] Tainted: G S C 3.13.0-32-generic #57-Ubuntu Aug 25 10:53:28 lubuntu kernel: [ 367.920294] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 25 10:53:28 lubuntu kernel: [ 367.920300] upowerd D e21f9da0 0 3002 1 0x00000000 Aug 25 10:53:28 lubuntu kernel: [ 367.920314] e21f9dfc 00000086 f5ef7094 e21f9da0 c1050272 c1a8d540 c1920a00 00000000 Aug 25 10:53:28 lubuntu kernel: [ 367.920333] c1a8d540 c1920a00 d9e44da0 f5ef6540 c1129061 00000002 000001c1 0001c37b Aug 25 10:53:28 lubuntu kernel: [ 367.920351] 00000000 00000002 00000000 e2276240 00000000 00000040 c12b0ec5 c19975a8 Aug 25 10:53:28 lubuntu kernel: [ 367.920368] Call Trace: Aug 25 10:53:28 lubuntu kernel: [ 367.920389] [<c1050272>] ? kmap_atomic_prot+0x42/0x100 Aug 25 10:53:28 lubuntu kernel: [ 367.920404] [<c1129061>] ? get_page_from_freelist+0x2a1/0x600 Aug 25 10:53:28 lubuntu kernel: [ 367.920417] [<c12b0ec5>] ? process_measurement+0x65/0x240 Aug 25 10:53:28 lubuntu kernel: [ 367.920432] [<c1654c73>] schedule_preempt_disabled+0x23/0x60 Aug 25 10:53:28 lubuntu kernel: [ 367.920443] [<c16565bd>] __mutex_lock_slowpath+0x10d/0x171 Aug 25 10:53:28 lubuntu kernel: [ 367.920454] [<c1655aec>] mutex_lock+0x1c/0x28 Aug 25 10:53:28 lubuntu kernel: [ 367.920478] [<f857223a>] acpi_smbus_transaction+0x48/0x210 [sbshc] Aug 25 10:53:28 lubuntu kernel: [ 367.920489] [<c11858e1>] ? do_last+0x1b1/0xf60 Aug 25 10:53:28 lubuntu kernel: [ 367.920504] [<f857242f>] acpi_smbus_read+0x2d/0x33 [sbshc] Aug 25 10:53:28 lubuntu kernel: [ 367.920520] [<f881e0f1>] acpi_battery_get_state+0x74/0x8b [sbs] Aug 25 10:53:28 lubuntu kernel: [ 367.920535] [<f881e8a9>] acpi_sbs_battery_get_property+0x2a/0x233 [sbs] Aug 25 10:53:28 lubuntu kernel: [ 367.920549] [<c14fa61f>] power_supply_show_property+0x3f/0x240 Aug 25 10:53:28 lubuntu kernel: [ 367.920561] [<c114664f>] ? handle_mm_fault+0x64f/0x8d0 Aug 25 10:53:28 lubuntu kernel: [ 367.920573] [<c14fa5e0>] ? power_supply_store_property+0x60/0x60 Aug 25 10:53:28 lubuntu kernel: [ 367.920586] [<c1407d20>] ? dev_uevent_name+0x30/0x30 Aug 25 10:53:28 lubuntu kernel: [ 367.920597] [<c1407d38>] dev_attr_show+0x18/0x40 Aug 25 10:53:28 lubuntu kernel: [ 367.920608] [<c11dad15>] sysfs_seq_show+0xe5/0x1c0 Aug 25 10:53:28 lubuntu kernel: [ 367.920621] [<c119846e>] seq_read+0xce/0x370 Aug 25 10:53:28 lubuntu kernel: [ 367.920633] [<c11983a0>] ? seq_hlist_next_percpu+0x90/0x90 Aug 25 10:53:28 lubuntu kernel: [ 367.920644] [<c1179238>] vfs_read+0x78/0x140 Aug 25 10:53:28 lubuntu kernel: [ 367.920654] [<c11799a9>] SyS_read+0x49/0x90 Aug 25 10:53:28 lubuntu kernel: [ 367.920667] [<c165efcd>] sysenter_do_call+0x12/0x28 /var/log/installer/debug shows upower related error: Ubiquity 2.18.8 Gtk-Message: Failed to load module "overlay-scrollbar" Gtk-Message: Failed to load module "overlay-scrollbar" ERROR:dbus.proxies:Introspect error on :1.23:/org/freedesktop/UPower: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Exception in GTK frontend (invoking crash handler): Traceback (most recent call last): File "/usr/lib/ubiquity/bin/ubiquity", line 636, in <module> main(oem_config) File "/usr/lib/ubiquity/bin/ubiquity", line 622, in main install(query=options.query) File "/usr/lib/ubiquity/bin/ubiquity", line 260, in install wizard = ui.Wizard(distro) File "/usr/lib/ubiquity/ubiquity/frontend/gtk_ui.py", line 290, in __init__ mod.ui = mod.ui_class(mod.controller) File "/usr/lib/ubiquity/plugins/ubi-prepare.py", line 93, in __init__ upower.setup_power_watch(self.prepare_power_source) File "/usr/lib/ubiquity/ubiquity/upower.py", line 21, in setup_power_watch power_state_changed() File "/usr/lib/ubiquity/ubiquity/upower.py", line 18, in power_state_changed not misc.get_prop(upower, UPOWER_PATH, 'OnBattery')) File "/usr/lib/ubiquity/ubiquity/misc.py", line 809, in get_prop return obj.Get(iface, prop, dbus_interface=dbus.PROPERTIES_IFACE) File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 70, in __call__ return self._proxy_method(*args, **keywords) File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 145, in __call__ **keywords) File "/usr/lib/python3/dist-packages/dbus/connection.py", line 651, in call_blocking message, timeout)

  Read the article

• OBIEE 11.1.1 - OBIEE 11g Full Sample App on VMware Player 4

  - by user809526

  The Full Sample App is designed to run on Virtual Box. Let's describe how to run it on VMware Player 4. Open Virtualization Format Tool http://communities.vmware.com/community/vmtn/server/vsphere/automationtools/ovf VMware Player Documentation https://www.vmware.com/support/pubs/player_pubs.html Full Sample App Deployment Guide sampleapp107-vbimage-deployguide-453583.pdf INSTALL VMplayer 4.0.0 as root LINUX # sh VMware-Player-4.0.0-471780.x86_64.bundle (A new VM is not needed and can be deleted later after that installation is completed. "I will install OS later" - blank hard disk Guest: linux, Red Hat Enterprise Linux 5-64bits => rename to RHEL target: eg /a/root/vmware/ Max disk size: 5 GB (will be deleted) Disk: Single file Dummy RHEL.vmk, RHEL.vmdk is generated. "Delete VM from Disk" in VM Player.) Copy Full Sample App files to target /a/root/vmware/ WARNING: Select a target eg /a/root/vmware/ with lots of free space, 95 GB. Check checksums (md5sum). Please do it! ff85c7eacf7fb8c382e98da875e879e1  Sampleapp_v107_GA-disk1.vmdk 973258cb3c7d64ab03ae853278cf2233  Sampleapp_v107_GA-disk2.vmdk e576be16e36d810479736bfb15d050f5  Sampleapp_v107_GA-disk3.vmdk 3455df77279e53e07d5fee6712f1597d  Sampleapp_v107_GA-disk4.vmdk OVF FILE   Sampleapp_v107_GA.ovf CONVERSION $ cd /a/root/vmware/ LINUX $ /usr/bin/ovftool -tt=ovf --compress=1 -dm=monolithicSparse Sampleapp_v107_GA.ovf .  [dot] Opening OVF source: Sampleapp_v107_GA.ovf Warning: No manifest file Opening OVF target: . Writing OVF package: Sampleapp_v107_GA/Sampleapp_v107_GA.ovf Disk Transfer Completed                   Completed successfully WINDOWS CYGWIN $ /cygdrive/c/VMwarePlayer/OVFTool/ovftool.exe -tt=ovf --compress=1 -dm=monolithicSparse Sampleapp_v107_GA.ovf .  [dot] Opening OVF source: Sampleapp_v107_GA.ovf Warning: No manifest file Opening OVF target: . Writing OVF package: Sampleapp_v107_GA\Sampleapp_v107_GA.ovf Disk Transfer Completed Completed successfully /a/root/vmware$ du -sk 49095328    .   [50 GB already occupied] IMPORT - First start of VM Player 4: /usr/bin/vmplayer "Open a Virtual Machine" Browse to /a/root/vmware/Sampleapp_v107_GA/Sampleapp_v107_GA.ovf [the new generated .ovf] "Import Virtual Machine" dialog Name: Sampleapp_v107_GA Location: /a/root/vmware/Sampleapp_v107_GA/storage [was /home/tdubois/vmware/Sampleapp_v107_GA] "Import" "The import failed because /a/root/vmware/Sampleapp_v107_GA/Sampleapp_v107_GA.ovf did not pass OVF specification conformance or virtual hardware compliance checks. Click Retry to relax OVF specification..." "Retry" ; Long import /a/root/vmware/Sampleapp_v107_GA/storage/Sampleapp_v107_GA.vmx and new .vmdk files are created. /a/root/vmware$ du -sk 95551384    .   [95 GB occupied] Full Sample App GUEST SETUP "Edit VM settings" min 3GB, 2+ processors, network bridged. For OBIEE + Essbase testing use 8 GB RAM hardware. At first time lauch of Full Sample App, leave OEL booting for several minutes undisturbed. Problem with X display server may occur [/usr/bin/Xorg ; man Xorg]. "Failed to start the X server.... Would you like to view the X server output to diagnose the problem?" "No" [tab key] "Would you like to try to configure the X server? Note that you will need the root password for this." "Yes" [oracle] X Display Settings 800x600 saved in /etc/X11/xorg.conf "Trying to restart the X server" Login as root/oracle in guest OEL. In guest OEL, Virtual Machine > Install VMware Tools... Extract archive VMwareTools-8.8.0-471268.tar.gz all files in writable local directory eg /root In Terminal run Perl script # cd /root/vmware-tools-distrib ; ./vmware-install.pl [keep all default answers] Set keyboard layout System > Preferences > Keyboard > Layouts Restart X server eg System > Log Out root... , relogin Modify X resolution System > Preferences > Screen Resolution Full Sample App OEL login: oracle/oracle ; root/oracle [default US keyboard layout] Credentials are described in the 'sampleapp107-vbimage-deployguide-453583.pdf' The large files in /a/root/vmware/ /a/root/vmware/Sampleapp_v107_GA/ may be removed. FAILURE REMARK: Adding the 4 original Sampleapp_v107_GA-disks[1234].vmdk to VM Player does NOT work as described below. "Edit VM settings" "Remove" "Hard Disk" "Edit VM settings" "Add" "Hard Disk" "Next" "Use an existing virtual disk" "Browse" "Finish" "Keep existing format" "Ok" for each 4 disks settings one by one. Start VM Player 4. "You do not have write access to a partition" Allow all Sampleapp_v107 OEL linux launches. OEL stalls silently after 'Checking filesystems'.

  Read the article

• Oracle Announces New Oracle Exastack Program for ISV Partners

  - by pfolgado

  Oracle Exastack Program Enables ISV Partners to Leverage a Scalable, Integrated Infrastructure to Deliver Their Applications Tuned and Optimized for High-Performance News Facts Enabling Independent Software Vendors (ISVs) and other members of Oracle Partner Network (OPN) to rapidly build and deliver faster, more reliable applications to end customers, Oracle today introduced Oracle Exastack Ready, available now, and Oracle Exastack Optimized, available in fall 2011 through OPN. The Oracle Exastack Program focuses on helping ISVs run their solutions on Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud -- integrated systems in which the software and hardware are engineered to work together. These products provide partners with a lower cost and high performance infrastructure for database and application workloads across on-premise and cloud based environments. Leveraging the new Oracle Exastack Program in which applications can qualify as Oracle Exastack Ready or Oracle Exastack Optimized, partners can use available OPN resources to optimize their applications to run faster and more reliably -- providing increased performance to their end users. By deploying their applications on Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud, ISVs can reduce the cost, time and support complexities typically associated with building and maintaining a disparate application infrastructure -- enabling them to focus more on their core competencies, accelerating innovation and delivering superior value to customers. After qualifying their applications as Oracle Exastack Ready, partners can note to customers that their applications run on and support Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud component products including Oracle Solaris, Oracle Linux, Oracle Database and Oracle WebLogic Server. Customers can be confident when choosing a partner's Oracle Exastack Optimized application, knowing it has been tuned by the OPN member on Oracle Exadata Database Machine or Oracle Exalogic Elastic Cloud with a goal of delivering optimum speed, scalability and reliability. Partners participating in the Oracle Exastack Program can also leverage their Oracle Exastack Ready and Oracle Exastack Optimized applications to advance to Platinum or Diamond level in OPN. Oracle Exastack Programs Provide ISVs a Reliable, High-Performance Application Infrastructure With the Oracle Exastack Program ISVs have several options to qualify and tune their applications with Oracle Exastack, including: Oracle Exastack Ready: Oracle Exastack Ready provides qualifying partners with specific branding and promotional benefits based on their adoption of Oracle products. If a partner application supports the latest major release of one of these products, the partner may use the corresponding logo with their product marketing materials: Oracle Solaris Ready, Oracle Linux Ready, Oracle Database Ready, and Oracle WebLogic Ready. Oracle Exastack Ready is available to OPN members at the Gold level or above. Additionally, OPN members participating in the program can leverage their Oracle Exastack Ready applications toward advancement to the Platinum or Diamond levels in the OPN Specialized program and toward achieving Oracle Exastack Optimized status. Oracle Exastack Optimized: When available, for OPN members at the Gold level or above, Oracle Exastack Optimized will provide direct access to Oracle technical resources and dedicated Oracle Exastack lab environments so OPN members can test and tune their applications to deliver optimal performance and scalability on Oracle Exadata Database Machine or Oracle Exalogic Elastic Cloud. Oracle Exastack Optimized will provide OPN members with specific branding and promotional benefits including the use of the Oracle Exastack Optimized logo. OPN members participating in the program will also be able to leverage their Oracle Exastack Optimized applications toward advancement to Platinum or Diamond level in the OPN Specialized program. Oracle Exastack Labs and ISV Enablement: Dedicated Oracle Exastack lab environments and related technical enablement resources (including Guided Learning Paths and Boot Camps) will be available through OPN for OPN members to further their knowledge of Oracle Exastack offerings, and qualify their applications for Oracle Exastack Optimized or Oracle Exastack Ready. Oracle Exastack labs will be available to qualifying OPN members at the Gold level or above. Partners are eligible to participate in the Oracle Exastack Ready program immediately, which will help them meet the requirements to attain Oracle Exastack Optimized status in the future. Guidelines for Oracle Exastack Optimized, as well as Oracle Exastack Labs will be available in fall 2011. Supporting Quotes "In order to effectively differentiate their software applications in the marketplace, ISVs need to rapidly deliver new capabilities and performance improvements," said Judson Althoff, Oracle senior vice president of Worldwide Alliances and Channels and Embedded Sales. "With Oracle Exastack, ISVs have the ability to optimize and deploy their applications with a complete, integrated and cloud-ready infrastructure that will help them accelerate innovation, unlock new features and functionality, and deliver superior value to customers." "We view performance as absolutely critical and a key differentiator," said Tom Stock, SVP of Product Management, GoldenSource. "As a leading provider of enterprise data management solutions for securities and investment management firms, with Oracle Exadata Database Machine, we see an opportunity to notably improve data processing performance -- providing high quality 'golden copy' data in a reduced timeframe. Achieving Oracle Exastack Optimized status will be a stamp of approval that our solution will provide the performance and scalability that our customers demand." "As a leading provider of Revenue Intelligence solutions for telecommunications, media and entertainment service providers, our customers continually demand more readily accessible, enriched and pre-analyzed information to minimize their financial risks and maximize their margins," said Alon Aginsky, President and CEO of cVidya Networks. "Oracle Exastack enables our solutions to deliver the power, infrastructure, and innovation required to transform our customers' business operations and stay ahead of the game." Supporting Resources Oracle PartnerNetwork (OPN) Oracle Exastack Oracle Exastack Datasheet Judson Althoff blog Connect with the Oracle Partner community at OPN on Facebook, OPN on LinkedIn, OPN on YouTube, or OPN on Twitter

  Read the article

< Previous Page | 739 740 741 742 743 744 745 746 747 748 749 750  | Next Page >