Search Results

Search found 19868 results on 795 pages for 'mech software'.

Page 749/795 | < Previous Page | 745 746 747 748 749 750 751 752 753 754 755 756  | Next Page >

  • Is it safe to enable forced ASLR via EMET on Windows?

    - by D.W.
    I'd like to enable forced ASLR for all DLLs on Windows. Is this safe? Background: ASLR is an important security mechanism that helps defend against code injection attacks. DLLs can opt into ASLR, and most do, but some DLLs have not opted into ASLR. If a program loads even a single non-ASLRized DLL, then the program doesn't get the benefit/protection of ASLR. This is a problem, because there are a non-trivial number of DLLs that haven't opted into ASLR. For instance, it was recently revealed that Dropbox injects a DLL into a bunch of processes, and the Dropbox DLL doesn't have ASLR turned on, which negates any ASLR protection they otherwise would have had. Unfortunately, there are many other widely used DLLs that haven't opted into ASLR. This is bad for system security. Microsoft provides several ways to turn on ASLR for all DLLs, even ones that haven't opted into ASLR: On Windows 7 and Windows Server 2008, you can enable "Force ASLR" in the registry. On all Windows versions, you can use Microsoft's EMET tool and enable EMET's "Mandatory ASLR" option. These methods are possible because all DLLs are compiled as position-independent code and they can be relocated to a random location even if they haven't opted into ASLR. These options will ensure that ASLR is turned on, even if the developers of the DLL forgot to opt into ASLR. Thus, forcing on ASLR systemwide may help system security. In principle, turning on forced ASLR could potentially break a poorly-written DLL, so there is some risk of breakage. I'm interested in finding out just significant this risk is. I have the suspicion that this kind of breakage might be extremely rare. Here's what I've been able to find: Microsoft has done compatibility testing with several dozen widely used applications. The only one they found where Mandatory ASLR causes problems is Windows Media Player. All the other applications continue working fine. (See pp.39-41 of this document.) I've seen some anecdotal reports that enabling "Mandatory ASLR"/"Force ASLR" is fine and unlikely to cause problems. CERT reports that AMD and ATI video drivers used to crash if you enabled forced ASLR, but their latest drivers have now fixed this problem. They don't show any other drivers with this problem. A forum post from Microsoft shows no other applications with compatibility problems if ASLR is forced on, as of 2011. A user reports that borderlands.exe, a video game by Gearbox Software, crashes if you turn on mandatory ASLR. What else should I know? Is it relatively safe to turn on Force ASLR / Mandatory ASLR systemwide to harden the secuity of my system, or will I be in for a world of pain and broken applications? How significant is the risk of compatibility problems and broken applications?

    Read the article

  • Windows 7, weird/annoying explorer problem

    - by Shiki
    First of all, I'm asking the moderators if you could summarize my problem in the Title and modify it according to that. Thanks in advance and sorry, my english is not that good. The problem. It happened on two of my machines already. Once it happens there are many problems with explorer. I'll try to describe at precisely I just can. So. Basically when you create a new folder, you have to hit the enter key TWICE because first it'll throw an error that "there is no such file..". Okay. Then if you try to delete some, this happens also. Renaming is the same. Here is an example. I tried adding a "2" to the end of the folder name, hit enter and got this. Here I can press cancel, nothing happens. If I press retry, the popup disappears and it'll finally change the folder name. I can't come up with anything for this. Using BitDefender (registered, full protection), Windows 7 x86 Ultimate retail (boxed, english version). The other PC had the same anti-virus protection , but it have a Windows 7 x64. Both systems are activated, updated totally. I don't remember installing any new stuff on the PCs. All the stuff on the PCs are legal, no cracked / any other software present. It just happened, so to say. Already reinstalled the other PC because I thought * I * messed up something and its just something FUBAR. However, I dont want to reinstall my laptop also. Any ideas are welcome. (Today I had a strange bug. Windows Explorer had 1.0+gb memory usage with 100% cpu. Killed it, launched a new explorer.exe and thats all. Nothing changed, but it may worth a try. The other PC did NOT have this problem, ever.) Isn't there a registry fix for this or something? :/

    Read the article

  • Building an SSL server farm

    - by dan
    I'm interested in building the the architecture in the article referenced below. I currently have a modestly-priced layer-4 load balancer and my application servers are the SSL endpoints. I want to put an SSL server farm in between my load balancer and my app servers. Then I will put another inexpensive load balancer between the SSL farm and my app servers, to do layer-7 routing. My web application has a fairly high amount of consumer traffic, that 6 servers can handle at about 50% capacity. Additionally, I have infrastructure traffic that is several orders of magnitude heavier than my consumer traffic. This is data coming in from all over the world that must integrate with my web application in real time. In total I have 18 app servers to handle all the traffic, plus 6 database servers. I will be adding 6 more app servers over the next 2 weeks and another 6 the 2 weeks after that. Conservatively, I estimate I will need to scale to 120 servers by the end of the year. My motivation right now is to separate the consumer traffic from the infrastructure traffic. The consumer traffic is higher priority than the infrastructure traffic and I cannot allow a stampede on the infrastructure side to take down my consumer-facing servers. Having a website that is always up is the top priority. However if there is a failure in one of the consumer app servers, I want to route that traffic to the servers designated for infrastructure traffic. The complication is that all the traffic is addressed using the same hostname and is nearly 100% https. The only way in my case to distinguish infrastructure from consumer traffic is by URL (poor architecture I inherited), so I need a layer 7 load balancer to be able to route. However for that to work I need either a fancy hardware-based SSL terminator or an SSL server farm as described above. Because my user base is rapidly scaling, I worry that if I go down the hardware path it will become very expensive very fast, especially since I will need 4 of everything for high availability (2 identical setups in 2 facilities). Meanwhile, the above diagram seems very flexible and more horizontally scalable. Has anyone built this before? Are there pre-built configurations? What considerations should I make and what software should I use (I've heard of people using apache with mod-ssl, nginx, and stunnel)? Also, when does it make sense to buy an expensive load balancer vs building an SSL server farm? http://1wt.eu/articles/2006_lb/index_05.html

    Read the article

  • Why do some games randomly turn my screen a random solid color?

    - by Emlena.PhD
    When playing some games my computer will randomly have an error that I cannot fix without turning it off and back on again. The screen changes to one solid color, which varies (off the top of my head I can remember seeing solid green, magenta, etc..) and the sound blares a single tone. The sound sometimes briefly restores and I can still hear the game sounds and even hear and still be heard by people in my Mumble channel, but the screen doesn't right itself so I'm still blind. What's more is this happens in some games but not in others. While the game is actually running, not while I'm still in the menu. However, it does happen if I'm afk or idle but the game world is still rendering. Games where the error occurs: League of Legends World of Warcraft Trine The Sims 2 Dungeon Defenders Safe games: games where it has never occurred: Tribes: Ascend Star Wars: the Old Republic Battlefield 3 So relatively older games cause the problem while newer games do not? I cannot predict when it will happen, it just seems random. However, if it happens and I try playing the same game further after restart it does appear to occur more frequently after the first time. But if I switch to a safe game it doesn't continue happening. Both of my RAM sticks appear fine, flipped position or either one on their own and games still run, computer still boots. I would think over-heating, but then why not all games? ALso, sometimes it happens immediately after I start playing, within seconds of the 3D world booting up. I'm looking to upgrade very soon so I want to figure out what component or software is fubar and replace/repair it. Any suggestions or recommendations of tools would be helpful. Below is some system information. Dxdiag does not detect any problems. Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120305-1505) System Manufacturer: Gigabyte Technology Co., Ltd. System Model: EP45-UD3R BIOS: Award Modular BIOS v6.00PG Processor: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (2 CPUs), ~3.2GHz Memory: 4096MB RAM DirectX Version: DirectX 11 DxDiag Version: 6.01.7601.17514 64bit Unicode Graphics card name: NVIDIA GeForce GTX 285 Driver Version: 8.17.12.9610 (error has occurred w/several driver versions) Sound: I do not have a sound card, been using motherboard's built in sound)

    Read the article

  • Simple mdadm RAID 1 not activating spare

    - by Nick Liu
    I had created two 2TB HDD partitions (/dev/sdb1 and /dev/sdc1) in a RAID 1 array called /dev/md0 using mdadm on Ubuntu 12.04 LTS Precise Pangolin. The command sudo mdadm --detail /dev/md0 used to indicate both drives as active sync. Then, for testing, I failed /dev/sdb1, removed it, then added it again with the command sudo mdadm /dev/md0 --add /dev/sdb1 watch cat /proc/mdstat showed a progress bar of the array rebuilding, but I wouldn't spend hours watching it, so I assumed that the software knew what it was doing. After the progress bar was no longer showing, cat /proc/mdstat displays: md0 : active raid1 sdb1[2](S) sdc1[1] 1953511288 blocks super 1.2 [2/1] [U_] And sudo mdadm --detail /dev/md0 shows: /dev/md0: Version : 1.2 Creation Time : Sun May 27 11:26:05 2012 Raid Level : raid1 Array Size : 1953511288 (1863.01 GiB 2000.40 GB) Used Dev Size : 1953511288 (1863.01 GiB 2000.40 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Mon May 28 11:16:49 2012 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Name : Deltique:0 (local to host Deltique) UUID : 49733c26:dd5f67b5:13741fb7:c568bd04 Events : 32365 Number Major Minor RaidDevice State 1 8 33 0 active sync /dev/sdc1 1 0 0 1 removed 2 8 17 - spare /dev/sdb1 I've been told that mdadm automatically replaces removed drives with spares, but /dev/sdb1 isn't being moved into the expected position, RaidDevice 1. UPDATE (30 May 2012): A badblocks destructive read-write test of the entire /dev/sdb yielded no errors as expected; both HDDs are new. As of the latest edit, I assembled the array with this command: sudo mdadm --assemble --force --no-degraded /dev/md0 /dev/sdb1 /dev/sdc1 The output was: mdadm: /dev/md0 has been started with 1 drive (out of 2) and 1 rebuilding. Rebuilding looks like it's progressing normally: md0 : active raid1 sdc1[1] sdb1[2] 1953511288 blocks super 1.2 [2/1] [U_] [>....................] recovery = 0.6% (13261504/1953511288) finish=2299.7min speed=14060K/sec unused devices: <none> I'm now waiting on this rebuild, but I'm expecting /dev/sdb1 to become a spare just like the five or six times that I've tried rebuilding before. UPDATE (31 May 2012): Yeah, it's still a spare. Ugh! UPDATE (01 June 2012): I'm trying Adrian Kelly's suggested command: sudo mdadm --assemble --update=resync /dev/md0 /dev/sdb1 /dev/sdc1 Waiting on the rebuild now... My questions are: Why isn't the spare drive becoming active sync? How can I make the spare drive become active?

    Read the article

  • VBA + Polymorphism: Override worksheet functions from 3rd party

    - by phi
    my company makes extensive use of a data provider using a (closed source) VBA plugin. In principal, every query follows follows a certain structure: Fill one cell with a formula, where arguments to the formula specify the query the range of that formula is extended (not an arrray formula!) and cells below/right are filled with data For this to work, however, a user has to have a terminal program installed on the machine, as well as a com-plugin referenced in VBA/Excel. My Problem These Excelsheets are used and extended by multiple users, and not all of them have access to the data provider. While they can open the sheet, it will recalculate and the data will be gone. However, frequent recalculation is required. I would like every user to be able to use the sheets, without executing a very specific set of formulas. Attempts remove the reference on those computers where I do not have terminal access. This generates a NAME error i the cell containing the query (acceptable), but this query overrides parts of the data (not acceptable) If you allow the program to refresh, all data will be gone after a failed query Replace all formulas with the plain-text result in the respective cells (press a button and loop over every cell...). Obviously destroys any refresh-capabilities the querys offer for all subsequent users, so pretty bad, too. A theoretical idea, and I'm not sure how to implement it: Replace the functions offered by the plugin with something that will be called either first (and relay the query through to the original function, if thats available) or instead of the original function (by only deploying the solution on non-terminal machines), which just returns the original value. More specifically, if my query function is used like this: =GETALLDATA(Startdate, Enddate, Stockticker, etc) I would like to transparently swap the function behind the call. Do you see any hope, or am I lost? I appreciate your help. PS: Of course I'm talking about Bloomberg... Some additional points to clarify issues raise by Frank: The formula in the sheets may not be changed. This is mission-critical software, and its way too complex for any sane person to try and touch it. Only excel and VBA may be used (which is the reason for the previous point...) It would be sufficient to prevent execution of these few specific formulas/functions on a specific machine for all excel sheets to come This looks more and more like a problem for stackoverflow ;-)

    Read the article

  • What is good usage scenario for Rackspace Cloud Files CDN (powered by AKAMAI) [closed]

    - by Andrew Smith
    I have just setup my website as static page via Rackspace CDN / Akamai. www.example.co.uk is an alias for d9771e6f24423091aebc-345678991111238fabcdef6114258d0e1.r61.cf3.rackcdn.com. d9771e6f24423091aebc-345678991111238fabcdef6114258d0e1.r61.cf3.rackcdn.com is an alias for a61.rackcdn.com. a61.rackcdn.com is an alias for a61.rackcdn.com.mdc.edgesuite.net. a61.rackcdn.com.mdc.edgesuite.net is an alias for a63.dscg10.akamai.net. a63.dscg10.akamai.net has address 63.166.98.41 a63.dscg10.akamai.net has address 63.166.98.40 a63.dscg10.akamai.net has IPv6 address 2001:428:4c02::cda8:ecb9 a63.dscg10.akamai.net has IPv6 address 2001:428:4c02::cda8:ed09 The HTTP header: HTTP/1.0 200 OK Last-Modified: Fri, 19 Oct 2012 23:27:41 GMT ETag: fdf9e14b77def799e09e8ce815a521da X-Timestamp: 1350689261.23382 Content-Type: text/html X-Trans-Id: tx457979be3bd746c2b4e5403a1189cdbc Cache-Control: public, max-age=900 Expires: Sat, 27 Oct 2012 22:18:56 GMT Date: Sat, 27 Oct 2012 22:03:56 GMT Content-Length: 7124 Connection: keep-alive I am wondering, if it's really the fastest solution to power the website? By investigating it thru http://www.just-ping.com/ it seems, that from many places the ping is very high, and during quick investigation I found that they use GeoIP to resolve addresses based on WHOIS, which is not accurate and because of that from many places the ping is above 300ms (for example, if ISP is in balgladore and request is routed to bangladore even if it's 300ms, for period of 1 month), while by just using Amazon Web Services and Route 53 Anycast DNS servers and only 4 EC2 instances it seems that for example India is always below 100ms, while using Akamai it goes above 300ms in some cases, and this is because Route 53 is using BGP. By quickly checking the Akamai, it seems that they are not getting feedback from the traffic - the high ping stays constant even if I keep downloading large files and videos, which is opposite to what they say on their website. They state, that they optimize the performance by taking feedback from the requests, while it seems they just use GeoIP with per City resolution (which are mostly big cities). Because of this, AWS with Route 53 / Anycast DNS seems to be much more reliable, as well EdgeCast which is using BGP, but I dont know how much does it cost to deploy static website. Actually, I dont know if EdgeCast is not a lie, because from isolated places there are many errors - so their performance is at the cost of quality of delivery, because of BGP switching the routes during transfer of large files. So I was wondering, what is really Akamai good for, because they dont seem to pose any strength in any field in what I do understand now, except they offer some software based WAF on their website, but what I really care about is the core distribiution, so the question is? Is really Akamai good for Videos? For static websites? ??? I found so far AWS most usable with most consistent ping and stable transfers.

    Read the article

  • Is Samba Server what I'm looking for, and if so, what do I need? (currently on DD-WRT Micro)

    - by Anthony
    I am really confused as to what Samba actually does and how it works. Here's what I'm hoping it does: I set up a Samba server on my LAN, and everyone will be able to see each other's shared files and swap them. But some of the documentation makes it sound like it will just allow Mac/Linux computers to see Windows computers. Other bits of the documentation make it sound more like a local server, where a Linux machine would install Samba and they would see everyone and be visible to everyone, but that won't change if anybody else can see each other. While still other things I've read make it seem more like a file-server, where everyone sees each other but file transfers are not peer-to-peer but instead need a host disk for files to act as go between. So, assuming I'm even in the right ballpark of what Samba does in terms of my goal of total cross-visibility on the network, I am left with needing to know what I'd need to set up the server and whether it can be done and is worth it... DD-WRT's article on Samba is a bit ambiguous. One second it sounds as if I can run the server on micro as long as it's set up on a usb drive, but then it also sounds like micro can't run it at all, etc. If I can run it from a usb-connected drive, I still need to know if the files are actually stored on that drive. The dd-wrt article mentions: You can run a Samba server on your main computer and run a client on your router (thus gaining writable storage for the router) or you can use Samba to share a drive connected (typically by USB) to the router among all the computers connected to your network. That one part "to share a drive...among all the computers" makes it sound like the only benefit I get from Samba is a share drive that any OS on the network can see, but they still won't see each other. But I'm very hopeful I'm misreading this. If the computers can see each other but still need the disk, how much space is generally a good idea? I'm basing this on the idea that the drive is a temporary store point. Obviously I'd have to get a drive big enough to store everything people wanted to share if the drive is a full-on file server. If I do have this all wrong, is there any software that achieves what I have in mind? Something that connects to the main router to bridge all clients?

    Read the article

  • load-causing processes disappearing from "top" ps -o pcpu shows bogus numbers

    - by Alec Matusis
    I administer a large number of servers, and I have this problem only with Ubuntu 10.04 LTS: I run a server under normal load (say load average 3.0 on an 8-core server). The "top" command shows processes taking certain % of CPU that cause this load average: say PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 11008 mysql 20 0 25.9g 22g 5496 S 67 76.0 643539:38 mysqld ps -o pcpu,pid -p11008 %CPU PID 53.1 11008 , everything is consistent. The all of the sudden, the process causing the load average disappears from "top", but the process continues to run normally (albeit with a slight performance decrease), and the system load average becomes somewhat higher. The output of ps -o pcpu becomes bogus: # ps -o pcpu,pid -p11008 %CPU PID 317910278 1587 This happened to at least 5 different severs (different brand new IBM System X hardware), each running different software: one httpd 2.2, one mysqld 5.1, and one Twisted Python TCP servers. Each time the kernel was between 2.6.32-32-server and 2.6.32-40-server. I updated some machines to 2.6.32-41-server, and it has not happened on those yet, but the bug is rare (once every 60 days or so). This is from an affected machine: top - 10:39:06 up 73 days, 17:57, 3 users, load average: 6.62, 5.60, 5.34 Tasks: 207 total, 2 running, 205 sleeping, 0 stopped, 0 zombie Cpu(s): 11.4%us, 18.0%sy, 0.0%ni, 66.3%id, 4.3%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 74341464k total, 71985004k used, 2356460k free, 236456k buffers Swap: 3906552k total, 328k used, 3906224k free, 24838212k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 805 root 20 0 0 0 0 S 3 0.0 1493:09 fct0-worker 982 root 20 0 0 0 0 S 1 0.0 111:35.05 fioa-data-groom 914 root 20 0 0 0 0 S 0 0.0 884:42.71 fct1-worker 1068 root 20 0 19364 1496 1060 R 0 0.0 0:00.02 top Nothing causing high load is showing on top, but I have two highly loaded mysqld instances on it, that suddenly show crazy %CPU: #ps -o pcpu,pid,cmd -p1587 %CPU PID CMD 317713124 1587 /nail/encap/mysql-5.1.60/libexec/mysqld and #ps -o pcpu,pid,cmd -p1624 %CPU PID CMD 2802 1624 /nail/encap/mysql-5.1.60/libexec/mysqld Here are the numbers from # cat /proc/1587/stat 1587 (mysqld) S 1212 1088 1088 0 -1 4202752 14307313 0 162 0 85773299069 4611685932654088833 0 0 20 0 52 0 3549 27255418880 5483524 18446744073709551615 4194304 11111617 140733749236976 140733749235984 8858659 0 552967 4102 26345 18446744073709551615 0 0 17 5 0 0 0 0 0 the 14th and 15th numbers according to man proc are supposed to be utime %lu Amount of time that this process has been scheduled in user mode, measured in clock ticks (divide by sysconf(_SC_CLK_TCK). This includes guest time, guest_time (time spent running a virtual CPU, see below), so that applications that are not aware of the guest time field do not lose that time from their calculations. stime %lu Amount of time that this process has been scheduled in kernel mode, measured in clock ticks (divide by sysconf(_SC_CLK_TCK). On a normal server, these numbers are advancing, every time I check the /proc/PID/stat. On a buggy server, these numbers are stuck at a ridiculously high value like 4611685932654088833, and it's not changing. Has anyone encountered this bug?

    Read the article

  • Dangers of Running Computers w/o Air Conditioning

    - by Daniel Bingham
    I recently moved in to an apartment with out air conditioning. This is fine most of the time as I am in upstate New York. It only ever gets above the high 70s during the hottest of the summer months. And when it does, I'm stubborn enough that I'll just deal with wearing minimal clothing around the house. However, I'm worried about my computers. I'm a software developer and gamer, so many of my machines are very high powered. And at least one of them is a server that must be left on 24/7 (not just a game server - also serves multiple websites). I've never before had to worry about the heat too much, as I always lived in buildings with central air. The in building temperature rarely got much above 70 F. All of the machines I built had good enough air cooling that I never saw a problem. Now the temperature in building is pushing 100F and I'm worried that the machines will not be able to keep themselves cool enough by simply blowing already hot air over themselves. The hottest of them I've turned off. However, the server I cannot. It's an old Dell (not custom build) that runs on a Pentium 4 (2.2GHz). It only has a single hard drive, integrated video. And it'd not running any processor intensive servers. Just basic LAMP. It used to run a MUD server, but that's off for now. So it should be idling most of the time. I haven't been able to find any sort of built in temperature sensors in the hardware... at least not any that the programs I've found in the Debian repository can read. And it's an inherited machine to which I do not have the full specs, so I don't know the tolerances anyway. How worried should I be about it melting down on me? How worried should I be about the hard drive melting or becoming corrupted? To generalize the question for other people, what are the safe temperature tolerances for most machines. How widely does it vary, and how does one go about determining when their machine is running too hot and needs to be shut down?

    Read the article

  • Hot-swap drive got new name, can I change it on-the-fly?

    - by T.J. Crowder
    One of the HDDs in my server's RAID config failed, so I took it out of the array and had the data center hot-swap it. They've done that, but now the new drive is /dev/sdc rather than /dev/sda. I suspect — correct me if I'm wrong — that if I reboot the server, it will be /dev/sda again, so I'm hesitant to add it back to the array as /dev/sdc because I don't want to lay a trap for myself to fall into on the next reboot. I'd just as soon not reboot the server if I don't need to (if I do need to, well, too bad for me). Is there a way I can change the device name from /dev/sdc to /dev/sda without rebooting? This is on Ubuntu 10.04 LTS. It's an md array ("Linux Software RAID"), where currently one of the devices (there are a couple of them) looks like this ("degraded" because I've removed the old /dev/sda from it): # mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Sun Oct 11 21:07:54 2009 Raid Level : raid1 Array Size : 97536 (95.27 MiB 99.88 MB) Used Dev Size : 97536 (95.27 MiB 99.88 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Jun 30 09:31:16 2011 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 UUID : 496be7a5:ab9177ed:7792c71e:7dc17aa4 Events : 0.112 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed Thanks, Update: Reading through the kernel md documentation, I suspect that if the name changes on reboot, it won't matter. (Good design, that.) Here's why: Boot time autodetection of RAID arrays When md is compiled into the kernel (not as module), partitions of type 0xfd are scanned and automatically assembled into RAID arrays. This autodetection may be suppressed with the kernel parameter "raid=noautodetect". As of kernel 2.6.9, only drives with a type 0 superblock can be autodetected and run at boot time. The kernel parameter "raid=partitionable" (or "raid=part") means that all auto-detected arrays are assembled as partitionable. I do have md compiled into the kernel, so I'm rebuilding the array now and will do the reboot to see what happens. Even if it works, the above doesn't answer the question I actually asked, so unless someone comes along and answers that question in the meantime (I'd be interested, even if it's not necessary for what I'm doing this very moment), I'll just delete the question to keep noise down.

    Read the article

  • SSL connection error during handshake on Windows Server 2008 R2

    - by Thomas
    I have a Windows 2008 R2 Server that runs a HTTPS Tunneling service. The software uses a certificate that is provided via the Windows certificate store. The certificate is located in the local computer private certificates. It supports server and client authentication with signing and keyencipherment. Cert chain The certificate chain looks fine. It's a Thawte SSL123 certificate. Thawte Premium Server CA (SHA1) [?e0 ab 05 94 20 72 54 93 05 60 62 02 36 70 f7 cd 2e fc 66 66] thawte Primary Root CA [?1f a4 90 d1 d4 95 79 42 cd 23 54 5f 6e 82 3d 00 00 79 6e a2] Thawte DV SSL CA [3c a9 58 f3 e7 d6 83 7e 1c 1a cf 8b 0f 6a 2e 6d 48 7d 67 62] Server certificate Issues Most browsers accept the certificate without any warning. But IE 7 on Windows XP SP3 and Opera 12 on OSX just report an connection error. Opera complains: Secure connection: fatal error (552) https://www.example.com/ Opera was not able to connect to the server, because the server does not communicate via any secure protocol known to Opera. A connection test using openssl s_client -connect www.example.com:443 -state says: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A 52471:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:/SourceCache/OpenSSL098/OpenSSL098-35.1/src/ssl/s23_lib.c:182: ssldump -aAHd host www.example.com during curl https://www.example.com/ reports: New TCP connection #1: localhost(53302) <-> www.example.com(443) 1 1 0.0235 (0.0235) C>SV3.1(117) Handshake ClientHello Version 3.1 random[32]= 50 77 56 29 e8 23 82 3b 7f e0 ae 2d c1 31 cb ac 38 01 31 85 4f 91 39 c1 04 32 a6 68 25 cd a0 c1 cipher suites Unknown value 0x39 Unknown value 0x38 Unknown value 0x35 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA Unknown value 0x33 Unknown value 0x32 Unknown value 0x2f Unknown value 0x9a Unknown value 0x99 Unknown value 0x96 TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 TLS_DHE_RSA_WITH_DES_CBC_SHA TLS_DHE_DSS_WITH_DES_CBC_SHA TLS_RSA_WITH_DES_CBC_SHA TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5 TLS_RSA_EXPORT_WITH_RC4_40_MD5 Unknown value 0xff compression methods unknown value NULL 1 0.0479 (0.0243) S>C TCP FIN 1 0.0481 (0.0002) C>S TCP FIN Thawte provides two Java based SSL Checkers. The Legacy Thawte SSL Certificate Installation Checker and the sslToolBox. Both validate the certificate under Windows XP but report connection errors under OSX and Windows 2008 R2.

    Read the article

  • Bypassing "Found New Hardware Wizard" / Setting Windows to Install Drivers Automatically

    - by Synetech inc.
    Hi, My motherboard finally died after the better part of a decade, so I bought a used system. I put my old hard-drive and sound-card in the new system, and connected my old keyboard and mouse (the rest of the components—CPU, RAM, mobo, video card—are from the new system). I knew beforehand that it would be a challenge to get Windows to boot and install drivers for the new hardware (particularly since the foundational components are new), but I am completely unable to even attempt to get through the work of installing drivers for things like the video card because the keyboard and mouse won't work (they do work, in the BIOS screen, in DOS mode, in Windows 7, in XP's boot menu, etc., just not in Windows XP itself). Whenever I try to boot XP (in normal or safe mode), I get a bunch of balloons popping up for all the new hardware detected, and a New Hardware Found Wizard for Processor (obviously it has to install drivers for the lowest-level components on up). Unfortunately I cannot click Next since the keyboard and mouse won't work yet because the motherboard drivers (for the PS/2 or USB ports) are not yet installed. I even tried a serial mouse, but to no avail—again, it does work in DOS, 7, etc., but not XP because it doesn't have the serial port driver installed. I tried mounting the SOFTWARE and SYSTEM hives under Windows 7 in order to manually set the "unsigned drivers warning" to ignore (using both of the driver-signing policy settings that I found references to). That didn't work; I still get the wizard. They are not even fancy, proprietary, third-party, or unsigned drivers. They are drivers that come with Windows—as the drivers for CPU, RAM, IDE controller, etc. tend to be. And the keyboard and mouse drivers are the generic ones at that (but like I said, those are irrelevant since the drivers for the ports that they are connected to are not yet installed). Obviously at some point in time over the past several years, a setting got changed to make Windows always prompt me when it detects new hardware. (It was also configured to show the Shutdown Event Tracker on abnormal shutdowns, so I had to turn that off so that I could even see the desktop.) Oh, and I tried deleting all of the PNF files so that they get regenerated, but that too did not help. Does anyone know how I can reset Windows to at least try to automatically install drivers for new hardware before prompting me if it fails? Conversely, does anyone know how exactly one turns off automatic driver installation (and prompt with the wizard)? Thanks a lot.

    Read the article

  • How to get physical partition name from iSCSI details on Windows?

    - by Barry Kelly
    I've got a piece of software that needs the name of a partition in \Device\Harddisk2\Partition1 style, as shown e.g. in WinObj. I want to get this partition name from details of the iSCSI connection that underlies the partition. The trouble is that disk order is not fixed - depending on what devices are connected and initialized in what order, it can move around. So suppose I have the portal name (DNS of the iSCSI target), target IQN, etc. I'd like to somehow discover which volumes in the system relate to it, in an automated fashion. I can write some PowerShell WMI queries that get somewhat close to the desired info: PS> get-wmiobject -class Win32_DiskPartition NumberOfBlocks : 204800 BootPartition : True Name : Disk #0, Partition #0 PrimaryPartition : True Size : 104857600 Index : 0 ... From the Name here, I think I can fabricate the corresponding name by adding 1 to the partition number: \Device\Harddisk0\Partition1 - Partition0 appears to be a fake partition mapping to the whole disk. But the above doesn't have enough information to map to the underlying physical device, unless I take a guess based on exact size matching. I can get some info on SCSI devices, but it's not helpful in joining things up (iSCSI target is Nexenta/Solaris COMSTAR): PS> get-wmiobject -class Win32_SCSIControllerDevice __GENUS : 2 __CLASS : Win32_SCSIControllerDevice ... Antecedent : \\COBRA\root\cimv2:Win32_SCSIController.DeviceID="ROOT\\ISCSIPRT\\0000" Dependent : \\COBRA\root\cimv2:Win32_PnPEntity.DeviceID="SCSI\\DISK&VEN_NEXENTA&PROD_COMSTAR... Similarly, I can run queries like these: PS> get-wmiobject -namespace ROOT\WMI -class MSiSCSIInitiator_TargetClass PS> get-wmiobject -namespace ROOT\WMI -class MSiSCSIInitiator_PersistentDevices These guys return information relating to my iSCSI target name and the GUID volume name respectively (a volume name like \\?\Volume{guid-goes-here}), but the GUID volume name is no good to me, and there doesn't appear to be a reliable correspondence between the target name and the volume that I can join on. I simply can't find an easy way of getting from an IQN (e.g. iqn.1992-01.com.example:storage:diskarrays-sn-a8675309) to physical partitions mapped from that target. The way I do it by hand? I start Disk Management, and look for a partition of the correct size, verify that its driver says NEXENTA COMSTAR, and look at the disk number. But even this is unreliable if I have multiple iSCSI volumes of the exact same size. Any suggestions?

    Read the article

  • Rsync over ssh: "ERROR: module is read only" suddenly appeared

    - by user978548
    I've used from some time rsync/ssh to backup my shared host contents to my personal Synology NAS (212j for that matter), and it worked quite well. For information, I use a password-less ssh connection. 3 days ago, I updated my NAS software and since (or at least I believe it's since that), the backup won't work anymore. I get the following error on the host: rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32) ERROR: module is read only ..which I do not understand. beside that nothing changed that I know of in both source and destination that can be related to rsync or ssh, I did check a few things and all seems to be alright: I can still connect through ssh from the host to my NAS with the good user, so ssh stuff like keys haven't changed. I also have the correct file permissions on the NAS (I checked, and also tried to create files, directories, .. with the user used by rsync through ssh). I read here and there that the error means that I have to ensure that my rsyncd.conf have the right read only = no in it, but as far as I know, I never used rsyncd as well as I never configured anything for it and until now it worked like a charm.. I use the following command to do the backup: rsync -ab --recursive \ --files-from="$FILES_FROM" \ --backup-dir=backup_$SUFFIX \ --delete \ --filter='protect backup_*' \ $WDIRECTORY/ \ remote_backup:$REMOTE_BACKUP/ So I'm stuck and really can't figure out what happened. Edit: As suggested in comments, I also tried passing commands to ssh (but not from inside a ssh session), that worked as expected, and also tried a single rsync command, which didnt worked, failing just like the complete backup command. (sharedHost):hostuser:~ > touch test.txt (sharedHost):hostuser:~ > rsync test.txt remote_backup:backups/test.txt ERROR: module is read only rsync error: syntax or usage error (code 1) at main.c(1034) [Receiver=3.0.8] rsync: connection unexpectedly closed (9 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7] and (sharedHost):hostuser:~ > ssh remote_backup 'touch /abs_path_to_backups/backups/test2.txt && echo "ProoF" > /abs_path_to_backups/backups/test2.txt' (sharedHost):hostuser:~ > ssh remote_backup 'cat /abs_path_to_backups/backups/test2.txt' ProoF

    Read the article

  • Troubleshooting an NFS server hanging after authenticated mount request

    - by Christoph
    I need some advice on troubleshooting an NFS server problem on Scientific Linux (RHEL) 6.1. The log on the server shows that an authenticated mount request was made: Jan 13 16:30:02 ??? rpc.mountd[3996]: authenticated mount request from ????:784 for /shared-storage/cm/shared (/shared-storage/cm/shared) But after that, it does not continue. On the client, it is also hanging. The interesting thing now is that I have two NFS servers, which should be identical, and the one is working perfectly, but the other exhibits the above mentioned behaviour. The problem is also not completely persistent, i. e. sometimes the mount request succeeds. I assume that the problem must be related to the server rather than to the client, because it is working perfectly on the other server. My question is where I should search the problem. I have already re-created the exports using exportfs -r, I have restarted the NFS server, I have compared the rpcinfo outputs of both server - no success. The problem even survives a reboot. Any other ideas are appreciated. As answer to Tim's question: I have sporadically the following in dmesg, but do not know whether it is related e1000e 0000:0c:00.0: eth4: Detected Hardware Unit Hang: TDH <24> TDT <25> next_to_use <25> next_to_clean <24> buffer_info[next_to_clean]: time_stamp <1c3d12940> next_to_watch <24> jiffies <1c3d12940> next_to_watch.status <0> MAC Status <80383> PHY Status <792d> PHY 1000BASE-T Status <7800> PHY Extended Status <3000> PCI Status <10> Further edit: The problem above does not occur on the machine that is working, so it probably is related. Again an edit: The error is not on the (software) device that is used for NFS, but on another one. The NFS mount also does not trigger the message.

    Read the article

  • unable to install anything on ubuntu 9.10 with aptitude

    - by Srisa
    Hello, Earlier i could install software by using the 'sudo aptitude install ' command. Today when i tried to install rkhunter i am getting errors. It is not just rkhunter, i am not able to install anything. Here is the text output: user@server:~$ sudo aptitude install rkhunter ................ ................ 20% [3 rkhunter 947/271kB 0%] Get:4 http://archive.ubuntu.com karmic/universe unhide 20080519-4 [832kB] 40% [4 unhide 2955/832kB 0%] 100% [Working] Fetched 1394kB in 1s (825kB/s) Preconfiguring packages ... Selecting previously deselected package lsof. (Reading database ... ................ (Reading database ... 95% (Reading database ... 100% (Reading database ... 20076 files and directories currently installed.) Unpacking lsof (from .../lsof_4.81.dfsg.1-1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/lsof_4.81.dfsg.1-1_amd64.deb (--unpack): unable to create `/usr/bin/lsof.dpkg-new' (while processing `./usr/bin/lsof'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Selecting previously deselected package libmd5-perl. Unpacking libmd5-perl (from .../libmd5-perl_2.03-1_all.deb) ... Selecting previously deselected package rkhunter. Unpacking rkhunter (from .../rkhunter_1.3.4-5_all.deb) ... dpkg: error processing /var/cache/apt/archives/rkhunter_1.3.4-5_all.deb (--unpack): unable to create `/usr/bin/rkhunter.dpkg-new' (while processing `./usr/bin/rkhunter'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Selecting previously deselected package unhide. Unpacking unhide (from .../unhide_20080519-4_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/unhide_20080519-4_amd64.deb (--unpack): unable to create `/usr/sbin/unhide-posix.dpkg-new' (while processing `./usr/sbin/unhide-posix'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Processing triggers for man-db ... Errors were encountered while processing: /var/cache/apt/archives/lsof_4.81.dfsg.1-1_amd64.deb /var/cache/apt/archives/rkhunter_1.3.4-5_all.deb /var/cache/apt/archives/unhide_20080519-4_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up libmd5-perl (2.03-1) ... Building dependency tree... 0% Building dependency tree... 50% Building dependency tree... 50% Building dependency tree Reading state information... 0% ........... .................... I have removed some lines to reduce the text. All the error messages are in here though. My experience with linux is limited and i am not sure what the problem is or how it is to be resolved. Thanks.

    Read the article

  • Server 2008/Windows 7/Samba Unspecified error 80004005

    - by ancillary
    I have a Samba share on a LAN with 2008 PDC/DNS. Smb authenticates with AD and I have several Win7 Machines that can connect fine. I recently added a couple of new computers to the LAN which were imaged the same way (same software, etc.; different hardware so different drivers) as the other machines and they have the same policies set. I can not get the new machines to connect to the samba share no matter what. I am always met with either Unspecified Error 0x80004005 or Network Path not found. I've turned off the firewall; set LANMAN auth to respond to NTLM only/send LM & NTLM responses/use NTLM session security if negotiated in Local Sec Policy SEcurity Options; tried both ip and hostname to connect. SMB log shows that authentication succeeds; but then connection is immediately killed by the client. tcpdump shows nothing remarkable except that when trying to connect from the client via hostname there is an unknown packet type error: ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) Here's a couple of lines from that error: 11:18:37.964991 IP 001-client.domain.local.49372 > smb.domain.local.netbios-ssn: P 1670:2146(476) ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) [000] AA 46 96 FA D5 99 33 75 0C C4 20 CE 26 42 F3 61 \252F\226\372\325\2313u \014\304 \316&B\363a [010] F0 8C FB 65 18 17 40 A5 DB 42 BB 94 37 53 92 EC \360\214\373e\030\027@\245 \333B\273\2247S\222\354 [020] 55 98 7F C4 AE 3D 6B 10 C4 U\230\177\304\256=k\020 \304 11:18:37.964998 IP smb.domain.local.netbios-ssn > 001-client.domain.local.49372: . ack 2146 win 100 Here's smb.conf just in case (though don't see how if other machines are working fine): [global] workgroup = MYDOMAIN realm = MYDOMAIN.LOCAL server string = domain|smb share interfaces = eth1 security = ADS password server = 192.168.1.3 log level = 2 log file = /var/log/samba/%m.log smb ports = 139 strict locking = no load printers = No local master = No domain master = No wins server = 192.168.1.3 wins support = Yes idmap uid = 500-10000000 idmap gid = 500-10000000 winbind separator = + winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes [samba-share1] comment = SMB Share path = /home/share/smb/ valid users = @"MYDOMAIN+Domain Users" admin users = @"MYDOMAIN+Domain Admins" guest ok = no read only = No create mask = 0765 force directory mode = 0777 Any ideas what else I could try or look for? Or what might be the problem? Thanks.

    Read the article

  • Cannot change default application association of certain file types

    - by H.B.
    After associating my MP3 files with MPlayer i can no longer change that association using the Choose default program... dialogue, the Always use this [...] Checkbox is always greyed out (Control Panel > Default Programs > Associate a file type or protocol with a program does not let me change it either). That also happened for MP4s but not for MKVs for example, and if i associate my MP3s with other applications like VLC it does not get blocked. I would really like to know why that is and if i can avoid this beforehand (thankfully i know ways to fix it afterwards already). Edit: Another obervation: The blocking programs (i managed to block it with an association to Visual Studio as well) do not appear in the Recommended Programs of the open-with-dialogue (And the explorer said: "The current program is not recommended, but i won't let you change it, ha!"). Edit: A screenshot as requested: As you can see on the top left (if you know the icon of MPlayer), the file is currently associated with MPlayer. Edit: Ways to fix it (Note: This question is not about fixing it) Using the Default Programs Control Panel > Default Programs > Set Default Programs, select WMP, Choose defaults for this program, check .mp3 This should reassociate the files with WMP and you can create a new association in the explorer. Using the registry (As always, keep your hands off it unless you know what you are doing or if you are fine with accidentally breaking your system) HKEY_CURRENT_USER > Software > Microsoft > Windows > CurrentVersion > Explorer > FileExts > .mp3 Here you could for example clean up the open-with-list, and the current default program seems to be saved here as well in the key UserChoice, there you can change the ProgId string to another application, you can associate it with WMP by entering WMP11.AssocFile.MP3 or just pick another application right away. You may need to mess with permissions on the key though, if you cannot change the ProgId value.

    Read the article

  • Poor performance of single processor 32bit Windows XP xompared SMP in VBA+Excel

    - by Adam Ryczkowski
    Welcome! On many computers I experienced poor performance of 32 bit guests running on 64 bit Linux host (I used only the Debian family). At last I managed to collect benchmark data. I made the benchmark by running custom VBA macro, (which we use in our company) that generates 284 pages long Word document full of Excel Pie charts, tables and comments. The macro is run as a single task (excluding the standard services) on a set of identically configured Windows XP 32-bit systems. I measured the time (in sec.) needed to perform the test. The computer (i.e. my notebook Asus P53E) supports both VT-d extensions and native Windows XP. It has 2-core processor, each core is hyperthreaded, so in total we have 4 mostly independent execution units. I use the latest VirtualBox 4.2 and VMWare Workstation 9.0 for Linux, installed together on the same host (running Mint 13 Maya) but never run simultaneously. The results (in column Time) are no less accurate than ± 10% Here are the results (sorry for the format, but I couldn't find out a better solution for tables in SO): +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | Host software | # processor | Windows kernel | IO APIC | VT-x/AMD-V | 2D Video Accel | Time | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 0 | 1139 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 1 | 1050 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 0 | 1 | 1644 | | VirtualBox | 4 | ACPI Multiprocessor PC | 1 | 1 | 1 | 6809 | | VMWare | 1 | ACPI Uniprocessor PC | | 1 | 1 | 1175 | | VMWare | 4 | ACPI Multiprocessor PC | | 1 | 1 | 3412 | | Native | 4 | ACPI Multiprocessor PC | | | | 1693 | | Native | 1 | Advanced Configuration and Power Interface (ACPI) PC | | | | 1170 | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ Here are the striking conclusions: Although I've read in the VirtualBox fora about abysmal performance with 32-bit guest on 64-bit host, VMWare also has problems compared to native run, still being twice faster(!) than VBox. Although VBA is inherently single-threaded, the Excel calculations, which take much more than a half of total computation time, supposedly aren't. So one would expect some speed gain when running on 2+ cores ("+" for hyperthreading). What we see is a speed loss. And quite big one too. For the VirtualBox the VT-d extension isn't a big deal. Can anyone shed some light on why the singlethreaded Windows kernel is so much faster than the SMP one?

    Read the article

  • Very slow printing from print server

    - by evolvd
    Print server is a VM on Xen The VM is Windows 2003 32bit. During the issue the VM is not being taxed in anyway, cpu, memory, hd read/write, and network speed is all good. The problem that I see is the transfer of the print file from the print server to the printer. The 80Mb file is transferred from the client to the print server in about 2 minutes but then it takes about 2 hours for that file to be sent to the printer. I can't figure out why this would just start to happen. The printer is rebooted every evening and is just used for one large print job in the morning. The server has been rebooted with no effect I changed the spool option to send the entire spool to the server before printing starts and it had no effect. This printer problem did happen to come about after some changes to the Xen environment. The Xen servers changed from using HBA NIC cards to software iscsi and a new switch was put in. I don't think this is related to the problem since all the speeds on the VMs are better now. The changed happened on Saturday and the first print to this printer happened on Monday morning. I'm just putting that out there but like I said I don't think it is related but I don't want to rule it out. At this point I don't have many other options besides the physical layer. I can switch out network cable that goes to the printer and I might be able to print the same job to another printer. I wont be able to test those things out till this afternoon though. Any other ideas or test I could do to try to find the reason for the slow speed? I forgot to say that this is only happening when printing to this one printer. ===Update=== I found out that there are a few printers that currently have this issue, not just the one. There are over 30 printers on the server though so I know it's not happening to all of them. I printed a large pdf doc from the server and it was able to print at the normal speed. If the machine sends the large print request it gets to the server fine but then slow to get from the server to the printer. If sent directly from the printer it gets to the printer at the normal speed. The question now is why is there a speed difference when it comes from the machine and why would it start now?

    Read the article

  • EMC/Legato/Networker Failed to recover files : Cross Platform Recovery not supported.

    - by marc.riera
    Software used to backup: EMC / Legato Networker legato server : windows legato clients: same hardware (2 years ago fedora something , now ubuntu ) Trying to recover from an old client, which is no longer available. So this is the thing. On 07/20/2008 we backed up a samba server(fedora something) to a tape , setting 1 year as browse policy and retention policy. Now this tape is recyclable. We took down the dns name. We deleted the legato client configuration. That legato client was reinstalled and is doing other stuff on ubuntu 10.04, with a different name but same ip. Now, 2 years and some month later #### Now we need to recover a folder from 2008 backup, on the fedora-samba-server. First thing, legato does not show the client name because the config was deleted. We create it again. We just set the old dns back on track, pointing the same ip, where the old server was, same MAC address ;). We created a new 'old client configuration' pointing to the new server. (different legato ip for client "I suppose" ) The ssid where the needed folder is on 2 tapes, 20 and 22. The index for that backup is on tape 21. We put this tapes on the jukebox (IBMT4000) -- not important for the issue -- All three tapes expired its browsable and recoverable time. So they are on recyclable. We get the clone id from the ssid with following command: mminfo -avot -q "ssid=<ssid>" -r cloneid We set the tapes to notrecyclable nsrmm -S <ssid>/<cloneid> -o notrecyclable We change the retention for the tapes for a future date nsrmm -S <ssid> -e 01/20/2011 We check the dates are correct : mminf -avV -q "ssid=<ssid>" -r ssbrowse(26),ssretent(26),savetime So far its OK. We close the terminal. Restart the server, just for being sure. Finally, we recover the index for that ssid where the folder should be. nsrck -L7 -t "07/20/2008" oldservername.domain.org There, we open the Networker User, select the server, select the old client as source, select the new client as destination. And this is what I get. imgur image of output -- http://i.imgur.com/1nOr8.png Should I understand that I need to install whatsoever operating system that was running on the old "linux server"/"networker client" to be able to restore 26Mb of files? thanks

    Read the article

  • Building a Mac/PC Network in a Dorm with Network Restrictions

    - by user70340
    I have been a Windows XP user for the last few years, but I recently bought a 15'' MacBook Pro for research purposes. I would like to set up a no-hassle Mac/PC Network at home so that I can access the internet on both computers and hardware between computers (i.e. a harddrive, or a mouse/keyboard with Synergy). Unfortunately, I live in a dorm with silly network restrictions so a solution is not straightforward. In particular: The dorm has a wired and wireless network, both which provide an internet connection. The wired network provides way faster internet (download speeds of 15 MB/s vs. 2 MB/s on wireless), so I would like to somehow exploit this, at least on my PC for Bittorrent :) Multiple devices can connect to the wireless network, but cannot "see" each other on the network (so software like Synergy would not work). Only 1 MAC address can connect to the wired network at a time. Ideally I would just connect a wireless router to the wired network and then have both the Mac and the PC on that, but the 1 MAC address restriction will not allow the both computer to access the internet simultaneously. I cannot think of a way to bypass this restriction (though I'm not network savvy), so I am planning to create a private no-internet network to allow the devices to see each other and share hardware. Here are some thoughts. I would appreciate any feedback at all! If I build a private wireless network: (first choice) I will use a wireless router that is not connected to the internet. My PC and Mac will be connected to each other wirelessly. I can then connect the PC to the internet via a wired network, but then the Mac will not have internet access as its wireless card is already in use. In this case, could I stream internet access from the PC to the Mac via the wireless network? Or could I buy a USB wireless card for the Mac so that it can connect to both my private network and the dorm network? If I build a private wired network: (second choice) Then both the PC and the Mac will connect to the internet wirelessly, which means I cannot take advantage of the faster download speeds.

    Read the article

  • Batch file to uninstall all Sun Java versions?

    - by Ricket
    I'm setting up a system to keep Java in our office up to date. Everyone has all different versions of Java, many of them old and insecure, and some dating back as far as 1.4. I have a System Center Essentials server which can push out and silently run a .msi file, and I've already tested that it can install the latest Java. But old versions (such as 1.4) aren't removed by the installer, so I need to uninstall them. Everyone is running Windows XP. The neat coincidence is that Sun just got bought by Oracle and Oracle has now changed all the instances of "Sun" to "Oracle" in Java. So, I can conveniently not have to worry about uninstalling the latest Java, because I can just do a search and uninstall all Sun Java programs. I found the following batch script on a forum post which looked promising: @echo off & cls Rem List all Installation subkeys from uninstall key. echo Searching Registry for Java Installs for /f %%I in ('reg query HKLM\SOFTWARE\microsoft\windows\currentversion\uninstall') do echo %%I | find "{" > nul && call :All-Installations %%I echo Search Complete.. goto :EOF :All-Installations Rem Filter out all but the Sun Installations for /f "tokens=2*" %%T in ('reg query %1 /v Publisher 2^> nul') do echo %%U | find "Sun" > nul && call :Sun-Installations %1 goto :EOF :Sun-Installations Rem Filter out all but the Sun-Java Installations. Note the tilda + n, which drops all the subkeys from the path for /f "tokens=2*" %%T in ('reg query %1 /v DisplayName 2^> nul') do echo . Uninstalling - %%U: | find "Java" && call :Sun-Java-Installs %~n1 goto :EOF :Sun-Java-Installs Rem Run Uninstaller for the installation MsiExec.exe /x%1 /qb echo . Uninstall Complete, Resuming Search.. goto :EOF However, when I run the script, I get the following output: Searching Registry for Java Installs 'DEV_24x6' is not recognized as an internal or external command, operable program or batch file. 'SUBSYS_542214F1' is not recognized as an internal or external command, operable program or batch file. And then it appears to hang and I ctrl-c to stop it. Reading through the script, I don't understand everything, but I don't know why it is trying to run pieces of registry keys as programs. What is wrong with the batch script? How can I fix it, so that I can move on to somehow turning it into a MSI and deploying it to everyone to clean up this office? Or alternatively, can you suggest a better solution or existing MSI file to do what I need? I just want to make sure to get all the old versions of Java off of everyone's computers, since I've heard of exploits that cause web pages to load using old versions of Java and I want to avoid those.

    Read the article

  • Out of nowhere, ssh_exchange_identification: Connection closed by remote hot me too

    - by dgerman
    See similar: Out of nowhere, ssh_exchange_identification: Connection closed by remote host Today, 6/19/12 attempting to ssh to the same host as usual ssh replied ssh_exchange_identification: Connection closed by remote host two additional attempts failed ssh -v $RWS OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to Real-World-Systems.com [174.127.119.33] port 22. debug1: Connection established. debug1: identity file /Users/dgerman/.ssh/id_rsa type 1 debug1: identity file /Users/dgerman/.ssh/id_rsa-cert type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host ping host was successful, ftp host was successful, ssh now successful, ssh -v $RWS OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to Real-World-Systems.com [174.127.119.33] port 22. debug1: Connection established. debug1: identity file /Users/dgerman/.ssh/id_rsa type 1 debug1: identity file /Users/dgerman/.ssh/id_rsa-cert type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3 debug1: match: OpenSSH_4.3 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'real-world-systems.com' is known and matches the RSA host key. debug1: Found key in /Users/dgerman/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/dgerman/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Trying private key: /Users/dgerman/.ssh/id_dsa debug1: Next authentication method: password ++++ What gives?? +++++++++++ Mac OS X 10.4.7 , OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011, /Users/dgerman/.ssh > ls -la total 24 drwx------ 7 dgerman staff 238 Jun 19 15:46 . drwxr-xr-x 389 dgerman staff 13226 Jun 19 15:46 .. -rw------- 1 dgerman staff 1766 Feb 26 18:25 id_rsa -rw-r--r-- 1 dgerman staff 400 Feb 26 18:25 id_rsa.pub -rw-r--r-- 1 dgerman staff 67 Feb 26 18:27 keyfingerprint -rw-r--r-- 1 dgerman staff 6215 May 1 08:11 known_hosts -rw-r--r-- 1 dgerman staff 220 Feb 26 18:26 randomart

    Read the article

< Previous Page | 745 746 747 748 749 750 751 752 753 754 755 756  | Next Page >