Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 75/1008 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• Configure USB GSM Modem

  - by adisembiring

  I want to configure EVDO Usb Modem in Ubuntu 10.10 I insert my usb modem to laptop and check the usb is detected or not using $sudo lsusb and the result is: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 14cd:6600 Super Top USB 2.0 IDE DEVICE Bus 002 Device 002: ID 201e:2009 is my us device. and than I execute command $dmesg | grep -e tty [ 0.000000] console [tty0] enabled [ 818.054660] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 818.055125] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 818.055647] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2 [ 818.330641] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 818.330743] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 818.330840] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 1054.917473] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1054.917995] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1054.918481] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB2 [ 1055.214087] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1055.214221] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1055.214356] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 Why converter disconnected from ttyUSB2 ? and than I try to execute command $sudo wvdialconf sorry, no modem was detected! Is it in use by another program ? did you configure it properly with setserials ? I change the same type usb modem from my friend, but I still get error above.

  Read the article

• Can I perform a distribution upgrade without rebooting?

  - by Martin Eve

  Hi, I would, ideally, like to run a distribution upgrade that doesn't end in a complete reboot of the machine (owing to an irritation in my hardware that requires a period of disconnection from the power supply before my SSD can be detected). What would be the procedure for doing this from a desktop environment? I would image: dist-upgrade shutdown all graphical services restart X I'd appreciate any advice (particularly on the exact procedure for step 2, if this correct). NB. I'm using KSplice for in-memory kernel patching, so the kernel is already dealt with. Many thanks, Martin

  Read the article

• ubuntu-12.04-wubi-i386.tar.xz for the wubi installer

  - by Alejandro

  I ran the wubi installer (from an extracted ubuntu ISO) and it downloads ubuntu-12.04-wubi-i386.tar.xz but it's slow and non-resumable so I cancelled it, found a mirror of the file online and downloaded it using Intenet download manager. Where should I be placing ubuntu-12.04-wubi-i386.tar.xz file so the wubi installer won't have to download that file anymore? Thank you. Update: I extracted the archive and there are two files, I'm afraid I do not know where to place them.

  Read the article

• What is default password?

  - by Benjamin

  What is the difference between default and login? And what does Default Keyring mean? When I run some applications(Emphaty etc), Unlock Keyring window launched first, then it requires me password. Why? This is a screen-shot when I run Emphaty. Why does it require me a password? It's a just messenger. It makes me crazy. I was able to find this Window. I guess this Windows could give me a solution. Before trying something to fix it, I'd like know about what they are. Please explain them to me. P.S My login password is not equal to default password now.

  Read the article

• How to get sound on macbook pro 4,1

  - by Thomas

  I have just installed Xubuntu 12.04.2. My soundcard is detected: thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Everything is put to max in alsamixer and nothing is muted (all the sliders are on OO. My speakers do not work, but when I plug in a headphone I hear it very soft. When I connect my stereo and put the sound VERY loud (3-blocks-of-complaining-neighbours loud) I hear it on a normal level but crackling. I added options snd-hda-intel model=mbp5 amixer set IEC958 off to at the end of /etc/modprobe.d/alsa-base.conf. When it's still not working I tried everything here: https://help.ubuntu.com/community/SoundTroubleshooting 1 >>> list-sinks 1 sink(s) available. * index: 0 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9959 volume: 0: 100% 1: 100% 0: 0.00 dB 1: 0.00 dB balance 0.00 base volume: 100% 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0.00 ms; range is 0.50 .. 371.52 ms card: 0 <alsa_card.pci-0000_00_1b.0> module: 4 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC889A Analog" alsa.id = "ALC889A Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0x9b500000 irq 46" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.name = "82801H (ICH8 Family) HD Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Realtek ALC889A" alsa.components = "HDA:10ec0885,106b3a00,00100103" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" ports: analog-output-speaker: Speakers (priority 10000, available: unknown) properties: analog-output-headphones: Headphones (priority 9000, available: no) properties: active port: <analog-output-speaker> 2 and 3: Doesn't seem an permission issue, the sound is very far away (See opening paragraph). 4 thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 5 thomas@thomas-pc:~$ find /lib/modules/`uname -r` | grep snd /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-hwdep.ko /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-pcm.ko [.. huge lists continues ..] /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/vx/snd-vxpocket.ko thomas@thomas-pc:~$ 6 thomas@thomas-pc:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Apple Inc. Device 00a4 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at 9b500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 7 I guess it's supported. Linux mint and Xubuntu 13.04 had no trouble with sounds. Everything worked out of the box Thanks in advance Edit: alsa-info.sh output: WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' ALSA Information Script v 0.4.62 -------------------------------- This script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware. dmesg lspci lsmod aplay amixer alsactl /proc/asound/ /sys/class/sound/ ~/.asoundrc (etc.) See './alsa-info.sh --help' for command line options. WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' Automatically upload ALSA information to www.alsa-project.org? [y/N] : y Uploading information to www.alsa-project.org ... Done! Your ALSA information is located at http://www.alsa-project.org/db/?f=6cffc584284d4c0b266eb53249824ef83d6c4e3e Please inform the person helping you. thomas@thomas-pc:~$

  Read the article

• Python PyBluez loses Bluetooth connection after a while

  - by Travis G.

  I am using Python to write a simple serial Bluetooth script that sends information about my computer stats periodically. The receiving device is a Sparkfun BlueSmirf Silver. The problem is that, after the script runs for a few minutes, it stops sending packets to the receiver and fails with the error: (11, 'Resource temporarily unavailable') Noticing that this inevitably happens, I added some code to automatically try to reopen the connection. However, then I get: Could not connect: (16, 'Device or resource busy') Am I doing something wrong with the connection? Do I need to occasionally reopen the socket? I'm not sure how to recover from this type of error. I understand that sometimes the port will be busy and a write operation is deferred to avoid blocking other processes, but I wouldn't expect the connection to fail so regularly. Any thoughts? Here is the script: import psutil import serial import string import time import bluetooth sampleTime = 1 numSamples = 5 lastTemp = 0 TEMP_CHAR = 't' USAGE_CHAR = 'u' SENSOR_NAME = 'TC0D' #gauges = serial.Serial() #gauges.port = '/dev/rfcomm0' #gauges.baudrate = 9600 #gauges.parity = 'N' #gauges.writeTimeout = 0 #gauges.open() filename = '/sys/bus/platform/devices/applesmc.768/temp2_input' def parseSensorsOutputLinux(output): return int(round(float(output) / 1000)) def connect(): while(True): try: gaugeSocket = bluetooth.BluetoothSocket(bluetooth.RFCOMM) gaugeSocket.connect(('00:06:66:42:22:96', 1)) break; except bluetooth.btcommon.BluetoothError as error: print "Could not connect: ", error, "; Retrying in 5s..." time.sleep(5) return gaugeSocket; gaugeSocket = connect() while(1): usage = psutil.cpu_percent(interval=sampleTime) sensorFile = open(filename) temp = parseSensorsOutputLinux(sensorFile.read()) try: #gauges.write(USAGE_CHAR) gaugeSocket.send(USAGE_CHAR) #gauges.write(chr(int(usage))) #write the first byte gaugeSocket.send(chr(int(usage))) #print("Wrote usage: " + str(int(usage))) #gauges.write(TEMP_CHAR) gaugeSocket.send(TEMP_CHAR) #gauges.write(chr(temp)) gaugeSocket.send(chr(temp)) #print("Wrote temp: " + str(temp)) except bluetooth.btcommon.BluetoothError as error: print "Caught BluetoothError: ", error time.sleep(5) gaugeSocket = connect() pass gaugeSocket.close() EDIT: I should add that this code connects fine after I power-cycle the receiver and start the script. However, it fails after the first exception until I restart the receiver. P.S. This is related to my recent question, Why is /dev/rfcomm0 giving PySerial problems?, but that was more about PySerial specifically with rfcomm0. Here I am asking about general rfcomm etiquette.

  Read the article

• Problem with reformatting Sandisk read-only USB drive

  - by dimas

  Hi everyone I have a problem reformatting my USB drive. Its showing this error message whenever I tried to reformat it using gparted: Parted 0.11.0 --enable-libparted-dmraid Libparted 2.3 Format /dev/sdb1 as ntfs 00:00:01 ( ERROR ) calibrate /dev/sdb1 00:00:01 ( SUCCESS ) path: /dev/sdb1 start: 22,768 end: 31,248,383 size: 31,225,616 (14.89 GiB) set partition type on /dev/sdb1 00:00:00 ( ERROR ) libparted messages ( INFO ) Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Can't write to /dev/sdb, because it is opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Reason I wanted to reformat it is because it just suddenly stopped working when I was transferring files from my pc and also it erased every content that was saved in the usb drive. I tried various tutorials on the net regarding this however I can't find a solution on how to make a usb drive change its read-only property to read-write or anything that would enable me to reformat this usb drive. I have also checked this link format read-only USB drive but this one doesn't have a solution. Also am attempting to do this on Ubuntu 12.04.

  Read the article

• How do I use my headphones and microphone?

  - by Pavan Kumar

  Hello, The headphones and microphone on my Ubuntu 10.10 work fine. But when I start an audio conversation using empathy or pidgin, my computer hangs, the microphone doesn't work, and I can't record anything. I have tried sudo alsa force-reload, I have installed pavucontrol, but nothing works. I can't increase the volume of the headphones and master channel using alsamixer though they are unmuted. (Everything works fine in Fedora and Windows XP.) How do I fix this? Thank you.

  Read the article

• Why does Ubuntu reset brightness settings at the loading screen?

  - by leugim

  Since I first installed Ubuntu 11.10, I noticed that volume and screen brightness get reset every time Ubuntu starts. Why is this so? And what ways are there to keep brightness and volume levels after rebooting? I have found some scripts that change the screen-brightness at login. But this is not a good solution since login is slower because it seems to wait until the screen brightness is at the level specified by the script. After entering the password I see the screen brightness go down gradually. Only after this is complete (~1 or 2 seconds) does the background disappear and Unity come up. The screenbrightness is not remembered but instead redefined at login. So it gets remembered for the first part of the boot, then set to MAX and then again re-set to normal value by the script. My boot process is as follows: desired brightness: 2 (13,33%) / Max brightness: 15 (100%) Bios / brightness: OK GRUB (violet background color, white text) / brightness: OK Ubuntu loading screen with the dots / brightness: MAX (win7 loads with OK-brightness) User Login / brightness: MAX Unity starts / brightness: OK It seems to be more like a temporary patch than a actual solution. I'm looking for solutions that set the desired brightness permanently and consistently throughout the whole boot-process After updating to 12.04 the behavior is the same. I tried setpci -s 02:00.0 F4.B=XX The value of F4.B is always '0' regardless of what value I try to set it to (tried 0, ff, f, 5, etc) The solution in this answer does not have any noticeable effect: Desktop doesn't remember brightness settings after a reboot The variables at /sys/class/backlight/acpi_video0/ get changed if I use Fn+UP and Fn+DOWN Any help is appreciated. Thanks!

  Read the article

• RAID5 over LVM on Ubuntu Server 12.04.3

  - by April Ethereal

  I'm trying to create a RAID5 software array using LVM. I use VirtualBox as I'm only learning how LVM works. So I've created 4 virtual SCSI drives and then did the following: pvcreate /dev/sd[b-e] vgcreate /dev/sd[b-e] raid5_vg lvcreate --type raid5 -i 3 -L 1G -n raid_lv raid5_vg However, I get an error after the last command: WARNING: Unrecognised segment type raid5 Using default stripesize 64.00 KiB Rounding size (256 extents) up to stripe boundary size (258 extents) Cannot update volume group raid5_vg with unknown segments in it! So it looks like raid5 is not a valid segment type. "lvm segtypes" also doesn't contain 'raid5' entry: root@ubuntu-lvm:~# lvm segtypes striped zero error free snapshot mirror So my question is - how could I create RAID5 logical volume using LVM only? It seems that it is possible, I saw a few references (not for Ubuntu, unfortunately) for RedHat and Gentoo systems. I don't want to use mdadm for now, until I find out that it is mandatory. Some info about my system is below: root@ubuntu-lvm:~# uname -a Linux ubuntu-lvm 3.8.0I use Ubuntu Server 12.04.3 (i686)-29-generic #42~precise1-Ubuntu SMP Wed Aug 14 15:31:16 UTC 2013 i686 i686 i386 GNU/Linux root@ubuntu-lvm:~# dpkg -l | grep lvm ii lvm2 2.02.66-4ubuntu7.3 The Linux Logical Volume Manager Thanks.

  Read the article

• Problem with Mono and .exe file

  - by Vere Nicolson

  I have purchased a piece of software to configure programable radio control transmitters. It says it will run on Linux, see below: Digital Radio runs on: Microsoft Windows 2000/2003/XP Microsoft Windows Vista/Seven/2008, Linux Ubuntu or a distribution with Mono, 32 or 64 bit, also in a virtual machine. Linux requires the Mono package installed, with also the Visual Basic 2005 runtime library. The Linux version is the same executable file of the Windows platform, and can be execute using Mono. You don't need Wine. All the tests have been done on Ubuntu Desktop 10.10 I have tried for weeks to get the drivers for the cable to work in XP or Win7 and I admit defeat. It looks like Ubuntu can run the cable effortlessly but now I can't get the software going. Tried to run in Ubuntu 10.04 with mono, GUI failed and I got the following message in terminal. $ mono ~/Desktop/GigRadioLinux/DigitalRadio/DigitalRadio.exe The entry point method could not be loaded Windows installation requires using a 30 odd character Passkey and a 4.24k text file as a "license" to be entered during running of the exe file. Can someone tell me how I enter the passkey and license into terminal, or is that not my primary problem? I don't understand "entry point method". Tried Wine and that didn't work either. The developer responded to my earlier emails re the cable drivers, but hasn't replied to questions regarding this. If I have left out anything important let me know and I will try to supply more information.

  Read the article

• How do I recover a BTRFS filesystem with "parent transid verify failed" errors?

  - by Evan P.

  I've got an external USB disk running btrfs. I use it for backups, and each time I do a backup I take a snapshot. However, it's giving me this error now: parent transid verify failed on 109973766144 wanted 1823 found 1821 parent transid verify failed on 109973766144 wanted 1823 found 1821 Obviously, this is a non-critical disk, but I have a few files on here that aren't available elsewhere. Is there any way to recover data from this disk? Maybe by mounting one of the snapshots as root?

  Read the article

• ¿Cómo utilizar 2º disco duro de Ubuntu?

  - by Lightday

  Recientemente he instalado Windows y Ubuntu 12.04. Tengo 2 discos duros ( 160 GB y 320 GB). Datos de la instalación: Partición Sistema de archivos Etiqueta Tamaño Punto de montaja /dev/sda1 ntfs Sistema Windows 21 GB ^/dev/sda2 extendida 128,54 GB /dev/sda5 Linux-swap Linux-swap 4,39 GB intercambio /dev/sda6 ext4 Sistema Linux 14,65 GB / /dev/sda7 ext4 Datos Linux 109,49 GB /home /dev/sdb1 ext4 Datos Linux 298.09 /opt Si pincho en la carpeta /home, me dice que hay 106 GB libres y es donde está la carpeta personal y puedo usar ese espacio del disco. Si pincho en la carpeta de /opt, no hay carpeta personal, ¿y como uso ese espacio del disco? Gracias.

  Read the article

• Upgrading to latest stable Mono

  - by Oli

  Mono 2.8 was recently released boasting a couple of large performance improvements. It's far too late for it to make it into Maverick and I'm fairly inpatient. I don't use Mono for anything mission-critical (just playing music and sorting photos) and if it breaks everything related to Mono, I can probably either live with it or fix it. I'm aware of how much I stand to lose if I mess things up. So with that acknowledged, does anybody here know how to build Mono in a way where it could be dropped in to replace the current Mono (2.6.7)? By this I mean ideally mirroring the packages that Ubuntu uses so that if the worse does happen, I can just downgrade the packages. Or is there a PPA that does all this for me?

  Read the article

• Totem not playing VCD

  - by faizal

  I am trying to play a VCD, but Totem gives me an error : Videos requires to install plugins to support the following multimedia feature: VCD protocol source So i did sudo apt-get install ubuntu-restricted-extras I still get the same error when i try to play the VCD again after installation, so i try : sudo apt-get install w64codecs libdvdcss2 But that gives me the error : Package libdvdcss2 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Unable to locate package w64codecs E: Package 'libdvdcss2' has no installation candidate Any way to make Totem play the VCD?

  Read the article

• Ubuntu software center not opening [closed]

  - by I'll sudeepdino008

  Ubuntu software center is not opening, when I type: software-center in the command line, the following errors are generated: (software-center:8570): Gtk-WARNING **: Theme parsing error: gtk.css:227:31: Failed to import: Error opening file: No such file or directory 2012-09-30 17:00:58,068 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'http://10.3.100.212:8080/' 2012-09-30 17:00:58,071 - softwarecenter.db.database - INFO - open() database: path=None use_axi=True use_agent=True 2012-09-30 17:00:58,327 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file 2012-09-30 17:00:58,428 - softwarecenter.ui.gtk3.app - INFO - show_available_packages: search_text is '', app is None. 2012-09-30 17:00:58,433 - softwarecenter.db.pkginfo_impl.aptcache - INFO - aptcache.open() Traceback (most recent call last): File "/usr/share/software-center/softwarecenter/db/pkginfo_impl/aptcache.py", line 243, in open self._cache = apt.Cache(GtkMainIterationProgress()) File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 102, in __init__ self.open(progress) File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 145, in open self._cache = apt_pkg.Cache(progress) SystemError: E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/ppa.launchpad.net_webupd8team_themes_ubuntu_dists_precise_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened. 2012-09-30 17:01:00,130 - softwarecenter.db.enquire - ERROR - _get_estimate_nr_apps_and_nr_pkgs failed Traceback (most recent call last): File "/usr/share/software-center/softwarecenter/db/enquire.py", line 115, in _get_estimate_nr_apps_and_nr_pkgs tmp_matches = enquire.get_mset(0, len(self.db), None, xfilter) File "/usr/share/software-center/softwarecenter/db/appfilter.py", line 89, in __call__ if (not pkgname in self.cache and File "/usr/share/software-center/softwarecenter/db/pkginfo_impl/aptcache.py", line 263, in __contains__ return self._cache.__contains__(k) AttributeError: 'NoneType' object has no attribute '__contains__' Traceback (most recent call last): File "/usr/bin/software-center", line 176, in <module> app.run(args) File "/usr/share/software-center/softwarecenter/ui/gtk3/app.py", line 1422, in run self.show_available_packages(args) File "/usr/share/software-center/softwarecenter/ui/gtk3/app.py", line 1352, in show_available_packages self.view_manager.set_active_view(ViewPages.AVAILABLE) File "/usr/share/software-center/softwarecenter/ui/gtk3/session/viewmanager.py", line 154, in set_active_view view_widget.init_view() File "/usr/share/software-center/softwarecenter/ui/gtk3/panes/availablepane.py", line 171, in init_view self.apps_filter) File "/usr/share/software-center/softwarecenter/ui/gtk3/views/catview_gtk.py", line 238, in __init__ self.build(desktopdir) File "/usr/share/software-center/softwarecenter/ui/gtk3/views/catview_gtk.py", line 511, in build self._build_homepage_view() File "/usr/share/software-center/softwarecenter/ui/gtk3/views/catview_gtk.py", line 271, in _build_homepage_view self._append_whats_new() File "/usr/share/software-center/softwarecenter/ui/gtk3/views/catview_gtk.py", line 450, in _append_whats_new whats_new_cat = self._update_whats_new_content() File "/usr/share/software-center/softwarecenter/ui/gtk3/views/catview_gtk.py", line 439, in _update_whats_new_content docs = whats_new_cat.get_documents(self.db) File "/usr/share/software-center/softwarecenter/db/categories.py", line 124, in get_documents nonblocking_load=False) File "/usr/share/software-center/softwarecenter/db/enquire.py", line 317, in set_query self._blocking_perform_search() File "/usr/share/software-center/softwarecenter/db/enquire.py", line 212, in _blocking_perform_search matches = enquire.get_mset(0, self.limit, None, xfilter) File "/usr/share/software-center/softwarecenter/db/appfilter.py", line 89, in __call__ if (not pkgname in self.cache and File "/usr/share/software-center/softwarecenter/db/pkginfo_impl/aptcache.py", line 263, in __contains__ return self._cache.__contains__(k) AttributeError: 'NoneType' object has no attribute '__contains__'

  Read the article

• Unable to start Apache on Ubuntu 12.10: no listening sockets available

  - by michalstanko

  I'm unable to start apache2 installed using apt-get. I'm getting the very same error on 2 separate Ubuntu 12.10 installations, one on my desktop PC, the other one running in VirtualBox: michal@michaltest:~$ sudo service apache2 start * Starting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName no listening sockets available, shutting down Unable to open logs Action 'start' failed. The Apache error log may have more information. [fail] lsof says: michal@michaltest:/var/log/apache2$ sudo lsof -i :80 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ubuntu-ge 2074 michal 11u IPv4 23978 0t0 TCP michaltest.local:47578->mulberry.canonical.com:http (CLOSE_WAIT) firefox 25194 michal 71u IPv4 42477 0t0 TCP michaltest.local:59793->69.59.197.29:http (ESTABLISHED) firefox 25194 michal 76u IPv4 41834 0t0 TCP michaltest.local:59698->69.59.197.29:http (ESTABLISHED) gvfsd-htt 25320 michal 12u IPv4 42568 0t0 TCP michaltest.local:56203->lb260.amst.cotendo.net:http (CLOSE_WAIT) netstat says: michal@michaltest:/var/log/apache2$ sudo netstat -lnp | grep '80' unix 2 [ ACC ] STREAM LISTENING 8030 876/acpid /var/run/acpid.socket /var/log/apache2/error.log: [Thu Nov 08 11:13:30 2012] [notice] Apache/2.2.22 (Ubuntu) configured -- resuming normal operations [Thu Nov 08 11:17:32 2012] [notice] caught SIGTERM, shutting down /etc/apache2/ports.conf: NameVirtualHost *:80 Listen 80 <IfModule mod_ssl.c> Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> Thanks for your help. EDIT #1: michal@michaltest:~$ sudo netstat -ano | grep '443' tcp 54 0 10.0.2.15:58504 91.189.92.70:443 CLOSE_WAIT off (0.00/0/0)

  Read the article

• How can I transfer files to a Kindle Fire with a Micro-USB cable?

  - by Jeff

  I'm running Ubuntu 11.10, and when I connect my Kindle Fire to my computer via micro usb, it is not recognized automatically. Other usb devices, such as my ipod and digital camera, are recognized just fine. It does not appear to be a usb power issue, since the Kindle Fire wakes up from sleeping when it is plugged in. I never get the message on the Kindle telling me it is ready to accept files from the computer, though. Here are the last 15 lines of dmesg after plugging the kindle in: jeff@prime:~$ dmesg | tail -n 15 [45918.269671] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [45929.072149] wlan0: no IPv6 routers present [46743.224217] usb 1-1: new high speed USB device number 5 using ehci_hcd [46743.364623] scsi8 : usb-storage 1-1:1.0 [46744.366102] scsi 8:0:0:0: Direct-Access Amazon Kindle 0001 PQ: 0 ANSI: 2 [46744.366356] scsi: killing requests for dead queue [46744.372494] scsi: killing requests for dead queue [46744.384510] scsi: killing requests for dead queue [46744.392348] scsi: killing requests for dead queue [46744.392731] scsi: killing requests for dead queue [46744.396853] scsi: killing requests for dead queue [46744.397214] scsi: killing requests for dead queue [46744.400795] scsi: killing requests for dead queue [46744.401589] sd 8:0:0:0: Attached scsi generic sg2 type 0 [46744.407520] sd 8:0:0:0: [sdb] Attached SCSI removable disk And here are my mounted filesystems: jeff@prime:~$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 298594984 174663712 108763480 62% / udev 1407684 4 1407680 1% /dev tmpfs 566924 896 566028 1% /run none 5120 0 5120 0% /run/lock none 1417308 300 1417008 1% /run/shm /home/jeff/.Private 298594984 174663712 108763480 62% /home/jeff I should note that, since I got Dropbox working on my Kindle, the usb is no longer strictly necessary, but as a matter of principle I'd love to get it working.

  Read the article

• Wifi will not connect with an Intel Wifi Link 1000

  - by Wallace Panter

  I have an HP dv7t-6100CTO laptop. I have linux ubuntu 12.04 lts dual booted. The specs of my laptop are: - i7-2620m dual core (2.7 ghz) processor - intel wifi link 1000 bgn wireless card I am having a hard time getting my laptop to connect to the internet through wireless. Ethernet is fine, but at college I need wireless the majority of the time. Can anyone help? Some steps I have done: I have tried WICD while uninstalling the Network Manager. When that didn't work, I uninstalled WICD and reinstalled Network Manager. I an not really sure what else to do.

  Read the article

• Meta package / quick reference for string manipulation commands?

  - by Dylan McCall

  The latest version of the Scribes text editor lets us select some text, hit Alt+X, and then run an arbitrary command. For example, I can run the sort command and the selected text is replaced appropriately. This is quite useful but I am also not very well-versed in awk and the like. Is there something I can grab that will provide more of these commands like sort? Maybe a package with a whole bunch of handy, task-specific string manipulation commands?

  Read the article

• how to install flash for opera browser? ubuntu 12 04

  - by santosamaru

  for the opera:plugins setting its had been setup as enable to use the flash player .. and also i do trying to follow the instruction from I am testing the new Opera 11, but it keeps telling me I need to install flash player it still not help me .. what i have after following that link instructions is root@santos:/home/santos# cp /usr/lib/flashplugin-installer/libflashplayer.so ~/.opera/plugins/libflashplayer.so cp: cannot create regular file `/root/.opera/plugins/libflashplayer.so': No such file or directory root@santos:/home/santos# sudo apt-get gecko-mediaplayer E: Invalid operation gecko-mediaplayer root@santos:/home/santos# cp /usr/lib/flashplugin-installer/libflashplayer.so ~/.opera/plugins/libflashplayer.so cp: cannot create regular file `/root/.opera/plugins/libflashplayer.so': No such file or directory anyone can help me to solve this ?

  Read the article

• No audio with headphones, but audio works with integrated speakers

  - by Pedro

  My speakers work correctly, but when I plug in my headphones, they don't work. I am running Ubuntu 10.04. My audio card is Realtek ALC259 My laptop model is a HP G62t a10em In another thread someone fixed a similar issue (headphones work, speakers not) folowing this: sudo vi /etc/modprobe.d/alsa-base.conf (or some other editor instead of Vi) Append the following at the end of the file: alias snd-card-0 snd-hda-intel options snd-hda-intel model=auto Reboot but it doesnt work for me. Before making and changes to alsa, this was the output: alsamixer gives me this: Things I did: followed this HowTo but now no hardware seems to be present (before, there were 2 items listed): Now, alsamixer gives me this: alsamixer: relocation error: alsamixer: symbol snd_mixer_get_hctl, version ALSA_0.9 not defined in file libasound.so.2 with link time reference I guess there was and error in the alsa-driver install so I began reinstalling it. cd alsa-driver* //this works fine// sudo ./configure --with-cards=hda-intel --with-kernel=/usr/src/linux-headers-$(uname -r) //this works fine// sudo make //this doesn't work. see ouput error below// sudo make install Final lines of sudo make: hpetimer.c: In function ‘snd_hpet_open’: hpetimer.c:41: warning: implicit declaration of function ‘hpet_register’ hpetimer.c:44: warning: implicit declaration of function ‘hpet_control’ hpetimer.c:44: error: expected expression before ‘unsigned’ hpetimer.c: In function ‘snd_hpet_close’: hpetimer.c:51: warning: implicit declaration of function ‘hpet_unregister’ hpetimer.c:52: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: In function ‘hpetimer_init’: hpetimer.c:88: error: ‘EINVAL’ undeclared (first use in this function) hpetimer.c:99: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c:100: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: At top level: hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: error: extra brace group at end of initializer hpetimer.c:121: error: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) make[1]: *** [hpetimer.o] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [compile] Error 1 And then sudo make install gives me: rm -f /lib/modules/0.0.0/misc/snd*.*o /lib/modules/0.0.0/misc/persist.o /lib/modules/0.0.0/misc/isapnp.o make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.9/acore' mkdir -p /lib/modules/0.0.0/misc cp snd-hpet.o snd-page-alloc.o snd-pcm.o snd-timer.o snd.o /lib/modules/0.0.0/misc cp: cannot stat `snd-hpet.o': No such file or directory cp: cannot stat `snd-page-alloc.o': No such file or directory cp: cannot stat `snd-pcm.o': No such file or directory cp: cannot stat `snd-timer.o': No such file or directory cp: cannot stat `snd.o': No such file or directory make[1]: *** [_modinst__] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [install-modules] Error 1 [SOLUTION] After screwing it all up, someone mentioned why not trying using the packages in Synaptic - so I did. I have reinstalled the following packages and rebooter: -alsa-hda-realtek-ignore-sku-dkms -alsa-modules-2.6.32-25-generic -alsa-source -alsa-utils -linux-backports-modules-alsa-lucid-generic -linux-backports-modules-alsa-lucid-generic-pae -linux-sound-base -(i think i listed them all) After rebooting, the audio worked, both in speakers and headphones. I have no idea which is the package that made my audio work, but it certainly was one of them. [/SOLUTION]

  Read the article

• Easy BCD Help: Dual boot Win7 and Ubuntu 11.10 -- "Add new Entry" for Ubuntu

  - by Bradley Peterson

  I first had Ubuntu 11.10 installed on a single partition on my 750GB hard drive. I then partitioned the hard drive to 500GB (for Ubuntu) in ext4 format (what it already was from the clean install of Ubuntu)....and 250GB for Win7 in NFTS format. Then I installed Win7 onto that 250GB partition. Installation went smoothly and I was successfully booted into Win7 and setting everything up. After I was done doing all the stupid updates from Microsof, I thought I was done and I wanted to go back to Ubuntu. This is where the problem starts Of course I reboot and it goes directly to Win7. I research and find that Win7 has overwritten the Ubuntu bootloader, etc etc.. I don't fully understand it. I download EasyBCD 2.1.2 In EasyBCD, I select "Add New Entry" and select "Linux/BSD" and change the type to "GRUB 2" and name it "Ubuntu" Next, I go to "BCD Deployment" and select "Install the Windows Vista/7 bootloader to the MBR" and click "Write MBR" I reboot, select "Ubuntu" and the purple screen comes up, but NOTHING HAPPENS. If I hit Ctrl+Alt+Del, it goes to the Login menu where it acts normal for about 10-15 seconds, then freezes. It does this repeatedly every time. MY QUESTION: What's wrong here? Why can't I load Ubuntu now? Am I going to have to reinstall Ubuntu with Windows, then set up the bootloader with EasyBCD instead of Ubuntu, THEN Win7? Any and all help is appreciated! -Brad

  Read the article

• How do I install Sheetmaker?

  - by Justas

  Sheetmaker generates Moviesheets and similar coversheets for TV-Shows. I would like to install Sheetmaker, but it looks a bit complicated for me. I have downloaded and followed the installation instructions from : http://www.users.on.net/~garstev99/wdtv/installation.html and also from this source: http://wdtvforum.com/main/index.php?topic=7912.0 but have stacked on the first step - I can't run ModuleTest.pl in terminal - terminal is opening for 1-2seconds and then closing without any results. I'll be very appreciated if someone could help me to execute this program. Related question

  Read the article

• Does "diff" exist for images?

  - by moose

  You can compare two text files very easy with diff and even better with meld: If you use diff for images, you get an example like this: $ diff zivi-besch.tif zivildienst.tif Binary files zivi-besch.tif and zivildienst.tif differ Here is an example: Original from http://commons.wikimedia.org/wiki/File:Tux.svg Edited: I've added a white background to both images and applied GIMPs "Difference" filter to get this: It is a very simple method how a diff could work, but I can imagine much better (and more complicated) ones. Do you know a program which works for images like meld does for texts? (If a program existed that could give a percentage (0% the same image - 100% the same image) I would also be interested in it, but I am looking for one that gives me visual hints where differences are.)

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >