Search Results

Search found 3993 results on 160 pages for 'audio'.

Page 75/160 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• Sound issues after trying everything

  - by Lerp

  I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

  Read the article

• How to disable Bluetooth auto-answer on Windows 7?

  - by MarkR

  When my BlackBerry 9630 is connected via Bluetooth to my Dell desktop running Windows 7 x64 there are a bunch of Bluetooth services enabled on Windows Advanced Audio BB Bypass service BB Desktop Service Dial-up Networking Headset Audio Gateway Remote Control Remotely Controlled Device When a call arrives on the 9630 Windows immediately answer the call. This is annoying when windows answers the phone before I even hear an audible ring and the hapless caller is saying, "hello. hello" on top of music I have playing. Does anyone know how to tell Windows not to answer the call? I want to be able to don my headset, switch audio to my headset, THEN manually answer the call.

  Read the article

• v4l - capture and watch at the same time

  - by John Barrett

  Capturing v4l and line-in audio using mencoder works very well, but I would like to record real-time gameplay video from consoles plugged into the video card. I've used xawtv for this (Works quite well, can preview and record in real time), but when I enable any deinterlacing or aspect ration options the video fails to record. I have to record raw and re-encode the video with the appropriate filters later to get something workable. Other things I have tried: tvtime with xvidcap and jack audio capture - xvidcap drops frames and muxing the audio is impossible as it will go out of sync (I have not found muxer options that work to force a correct frame rate) mencoder capture to file, attempt to pipe tail of file to mplayer... mencoder works great, piping the file is far too heavy to attempt gameplay. Soooo, v4l capture and preview simultaneously, recommendations?

  Read the article

• graphics cards with no HDMI output

  - by Noam Gal

  I am currently looking at Gainward GTX260 896MB GS GLH, but I've seen it also on the x275 version - the card doesn't have an HDMI output, only two dvi and one tv out (s-video?). They claim they support HDMI using a dvi-HDMI converter. Will I get a true high definition quality on my TV (assuming it supports it) like that? Or is it not as good, and I should stick to cards that have an HDMI output (ATI), or pay way too much for x295? What about connecting the audio? The x260 comes with an internal spdif cable - does that mean I can connect my soundcard to my graphics card, and have the audio come out through the dvi, and into the HDMI cable? Or am I mixing it all up here, and I have to somehow connect the sound to the TV using a seperate cable (Hoping it has a seperate audio-in for the HDMI channel)?

  Read the article

• Enabling Surround sound on a Realtek ALC892 via SPDIF, on Windows 7

  - by Alex

  I have a problem with my ALC892, on an ASRock mainboard (ASRock 890FX Deluxe4). I get only stereo sounds if I use SPDIF connection, in general. My amp shows that is getting surround sound only when I use the Test feature of Windows 7. This test feature allows to know which formats are supported by the audio chip. The tests render correctly both Dolby Digital and DTS. You can find this test under Sounds, Playback Devices, Select Digital Audio, then "Properties". I am using Windows 7 x64, with the latest drivers from the official Realtek website. I also tested other driver versions, both from the Realtek website and from the ASRock one, but had no luck. Thanks for the help. Some specs: CPU: AMD Phenom II X4 965 MOBO: ASRock 890FX Deluxe4 (with onboard Realtek ALC892) Audio amp: Onkyo R-380 (works fine with other sources like PS3 and Xbox 360)

  Read the article

• Use external speakers with laptop hooked to separate monitor?

  - by lhan16

  I have a laptop with a set of external speakers hooked up to it on my computer desk. The speakers use the standard 3.5mm audio (headphones) jack. The speakers work fine, but I've recently added a separate monitor to my laptop via HDMI. With the monitor hooked up to my laptop and the speakers still hooked up to the laptop, sound will only come out of the built-in monitor speakers. When I look at my audio settings, there are three different "audio playback devices" showing up, but only the built-in monitor speakers make noise when I click "test" (and I hear nothing when I set any of the other devices as the default. Does anyone know how I can still use my external speakers when using a separate monitor with my laptop? I'm hoping there is a solution that doesn't require the laptop to be open or closed, because I use both scenarios. I came across this post, but it doesn't look like they had much luck.

  Read the article

• Android: Use XML Layout for List Cell rather than Java Code Layout (Widgets)

  - by Stephen Finucane

  Hi, I'm in the process of making a music app and I'm currently working on the library functionality. I'm having some problems, however, in working with a list view (In particular, the cells). I'm trying to move from a simple textview layout in each cell that's created within java to one that uses an XML file for layout (Hence keeping the Java file mostly semantic) This is my original code for the cell layout: public View getView(int position, View convertView, ViewGroup parent) { String id = null; TextView tv = new TextView(mContext.getApplicationContext()); if (convertView == null) { music_column_index = musiccursor.getColumnIndexOrThrow(MediaStore.Audio.Media.TITLE); musiccursor.moveToPosition(position); id = musiccursor.getString(music_column_index); music_column_index = musiccursor.getColumnIndexOrThrow(MediaStore.Audio.Media.DISPLAY_NAME); musiccursor.moveToPosition(position); id += "\n" + musiccursor.getString(music_column_index); music_column_index = musiccursor.getColumnIndexOrThrow(MediaStore.Audio.Albums.ALBUM); musiccursor.moveToPosition(position); id += "\n" + musiccursor.getString(music_column_index); tv.setText(id); } else tv = (TextView) convertView; return tv; } And my new version: public View getView(int position, View convertView, ViewGroup parent) { View cellLayout = findViewById(R.id.albums_list_cell); ImageView album_art = (ImageView) findViewById(R.id.album_cover); TextView album_title = (TextView) findViewById(R.id.album_title); TextView artist_title = (TextView) findViewById(R.id.artist_title); if (convertView == null) { music_column_index = musiccursor.getColumnIndexOrThrow(MediaStore.Audio.Albums.ALBUM); musiccursor.moveToPosition(position); album_title.setText(musiccursor.getString(music_column_index)); //music_column_index = musiccursor.getColumnIndexOrThrow(MediaStore.Audio.Media.DISPLAY_NAME); //musiccursor.moveToPosition(position); music_column_index = musiccursor.getColumnIndexOrThrow(MediaStore.Audio.Media.TITLE); musiccursor.moveToPosition(position); artist_title.setText(musiccursor.getString(music_column_index)); } else{ cellLayout = (TextView) convertView; } return cellLayout; } The initialisation (done in the on create file): musiclist = (ListView) findViewById(R.id.PhoneMusicList); musiclist.setAdapter(new MusicAdapter(this)); musiclist.setOnItemClickListener(musicgridlistener); And the respective XML files: (main) <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <ListView android:id="@+id/PhoneMusicList" android:layout_width="fill_parent" android:layout_height="fill_parent" /> <TextView android:id="@android:id/empty" android:layout_width="wrap_content" android:layout_height="0dip" android:layout_weight="1.0" android:text="@string/no_list_data" /> </LinearLayout> (albums_list_cell) <?xml version="1.0" encoding="utf-8"?> <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/albums_list_cell" android:layout_width="wrap_content" android:layout_height="wrap_content"> <ImageView android:id="@+id/album_cover" android:layout_alignParentLeft="true" android:layout_alignParentTop="true" android:layout_width="50dip" android:layout_height="50dip" /> <TextView android:id="@+id/album_title" android:layout_toRightOf="@+id/album_cover" android:layout_alignParentTop="true" android:layout_width="wrap_content" android:layout_height="wrap_content" /> <TextView android:id="@+id/artist_title" android:layout_toRightOf="@+id/album_cover" android:layout_below="@+id/album_title" android:layout_width="wrap_content" android:layout_height="15dip" /> </RelativeLayout> In theory (based on the tiny bit of Android I've done so far) this should work..it doesn't though. Logcat gives me a null pointer exception at line 96 of the faulty code, which is the album_title.setText line. It could be a problem with my casting but Google tells me this is ok :D Thanks for any help and let me know if you need more info!

  Read the article

• XPP-32 over W7-64 on music production laptop

  - by quarlo

  I need to upgrade my laptop and need high performance for music production (recording and mixing). My audio interface manufacturer seems to be unable to successfully convert their drivers to 64-bit. I do not trust a virtual machine to handle real-time audio recording at low enough latency so ... I would like to install XP Pro 32-bit on a separate partition and dual boot since most of the machines that can handle this application now ship with Windows 7 64-bit flavors. I'd like to transit to 64-bit over time assuming M-Audio does eventually get a handle on 64-bit drivers, but really need to ensure that I can stay at 32-bit for now. Does anyone have any experience with this or something similar?

  Read the article

• How can I access the external microphone with Ubuntu?

  - by Charles Merriam

  Sound in Ubuntu, it has its own special joy. I would like my external microphone to work. Symptoms: I can play sound through the speakers I can play sound through the headsets. Plugging and and plugging headphone output correctly switches. I can record from the built-in microphone, using "Sound Recorder" and others. but: I cannot record from the external microphone. My Sound Preferences/Input panel has no option for an external microphone. If the answer is upgrade the ALSA drivers, please say exactly what to type. Thank you. ======== I'm using Ubuntu 9.10 Karmic Koala on a laptop (Gateway W3501), Sigmatel. That is: ~$ head -1 /proc/asound/card0/code* ==> /proc/asound/card0/codec#0 <== Codec: SigmaTel STAC9205 ==> /proc/asound/card0/codec#1 <== Codec: Conexant ID 2c06 ~$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

  Read the article

• Batch Convert .mkv to .mp4

  - by IamHere

  I want to batch convert all .mkv files in a folder into .mp4 with VLC. It should use the original video-/audio stream and if possible the .ass subtitle of the .mkv. It's not really a conversion, it's more like changing the container – my player can't read the MKV videos. If I do this conversion by hand (manually) it works, but I have a lot of MKV files to convert, so it would take a lot of time. I have searched the internet for a batch file to do this and I found a few. I tried to modify them to my wish, but all attempts I tried just created a .mp4 file that doesn't contain the audio stream and the video stream also cannot be rendered by all my media players on the PC. So could someone tell me how the batch has to look like, so it works with the original video and audio stream (and maybe .ass subtitles)?

  Read the article

• What is the best free service to host images and mp3 files?

  - by Edward Tanguay

  I am making an educational social software silverlight application. I would like users to be able to point the application to a URL with text, images, and audio files which they have created. Many users will not have their own website to do this, so we are looking for a free service they can use to upload, and manage their own text/image/audio content. What is the best free service for non-technical users to upload and make available text, images and audio? For instance, sites.google.com allows you to upload pictures and access them via http so that would work, but that is more about making a website. For this purpose we just need the ability to upload files, without the website creation tools.

  Read the article

• sox mix nested scripts on amazon ec2 rhel linux

  - by Ray

  I'm trying to use "sox" to mix some audio files. The command works great on my Mac terminal sox -m audio.wav "| sox upload.wav -p trim 2 1 pad 6" final.wav This mixes (not concatenate) audio.wav and a section of upload.wav from the 2nd second to the 3rd second and adds 6 seconds of padding in the front, and outputs to final.wav Now the problem is, the SAME EXACT command does NOT work my Amazon EC2 RHEL box. (sox is installed correctly). I get the following error sox soxio: Can't open input file `| sox upload.wav -p trim 2 2 pad 6': No such file or directory For some reason RedHat doesn't like the double quotes. Even though it is documented to be used this way. Thanks for your help!

  Read the article

• Good quality voice communication software over Internet for windows

  - by ORA600

  I regularly attend over-the-phone meetings, where is a polycom/polispan device on the other side. The quality of the sound is bad, even those whose English is a first language sometimes are struggling to realize what is being said on the other side. I understand this is because of too aggressive audio compression in the line. Does anyone know any good audio chat software which does not over-compress audio stream. The IP channel between two offices is wide enough. In other words, you should be able to listen to a music (not only a speech) from the remote side with good quality. So, Skype is too over-compressing as well. Does anyone know anything like that?

  Read the article

• Is Sony Vegas Pro 8 uable to import AC3? How to enable?!

  - by gojira666

  I am using Sony Vegas Pro 8.0b. I want to import an AVI (DivX), where the audio codec used is "0x2000 (Dolby AC3) AC3 ", according to GSpot. I later want to render this video again in another codec etc. I have done videoconversion with Vegas 8 many times and ususally do not run into any problems. However with this particular video, the audio stream simply does not show up in the track list or anywhere! There is simply no audio (the video is fine). Questions: is Sony Vegas Pro 8.0 unable to import AC3? If yes, can I make it so that it becomes able to do so and how?

  Read the article

• Batch Convert .mkv to .mp4 with VLC

  - by IamHere

  i want to batch convert all .mkv file in a folder into .mp4 with vlc. it should use the original video-/audio-stream and if possible the .ass subtitle of the .mkv. so its not really a convert, its more changing the container. (my player cant read the mkv) if i do this conversion by hand (manually) it works, but i have a lot of mkv to convert, so it would take a lot of time. i have searched the internet for a batch file to do this and i found a few and tried to modify them to my wish, but all attempts i tried just created a .mp4 file that doesn't contain the audio-stream and the video-stream also cannot be rendered by all my mediaplayers on the pc. so i would be very thankful, if you could tell me how the batch have to look like, so it works with original video-/audio-stream (maybe .ass subtitle)

  Read the article

• How to increase the volume gain when viewing online flash video?

  - by Nick000

  When watching online Flash videos on Youtube, Dailymotion, etc... sometimes the videos are recorded at low volume. The thing is that, I have a HP Notebook with good enough audio volume, but when I watch these "low volume" videos the sound level is really low, even when I have the volume at 100%. So I am looking for a way to increase the volume gain (like VLC player where you can increase it to 200%), BUT while watching it live on Youtube... that is, I don't want to download the video on my PC. Is there a software that can do that? Maybe an advanced flash video player that integrates to browser? or some other software to increase the volume gain overall on my laptop? My Specs: HP Pavilion Notebook, Audio: IDT High Definition Audio CODEC (integrated), Vista 64-bit, 4 GB RAM, etc.....

  Read the article

• How to get the CentOS 5.6 alsa drivers which will really work with one shot, without any internet.

  - by 89899.3K

  I have one chance to install this in my server on site. Server that i am running is CentOS 5.6 (Dell R310, RAID1) where i need to install alsa-sound driver so that anything related to audio recording from rtsp is working (rail station/rail passing video recording including audio, where audio is not working). Unfortunately i do not have any kind of internet in that odd none human location so yum will not work for me. I need a offline way to install alsa drivers including missing dependencies if arise. What and where i can download this to my usb or cd? so that i can successfully install it (like mission complete). Thanks

  Read the article

• ffmpeg fully html 5 converion supported

  - by user58542

  I need to know about library that required for ffmpeg for convert any format of audio and video for supported following format to have best configuration to convert audio and video files for html5 formats. I need for support mp3 and ogg for audio files. Also need for support FLV, H.264, Ogg Theora and VP8 (WebM) for video files. I'm using debian also using deb-multimedia repository. I need list of packages required for this formats(any format to this formats). also any configuration for install from package management or compile via latest ffmpeg repository. Thanks a lot.

  Read the article

• Stream Media and Live TV Across the Internet with Orb

  - by DigitalGeekery

  Looking for a way to stream your media collection across the Internet? Or perhaps watch and record TV remotely? Today we are going to look at how to do all that and more with Orb. Requirements Windows XP / Vista / 7 or Intel based Mac w/ OS X 10.5 or later. 1 GB RAM or more Pentium 4 2.4 GHz or higher / AMD Athlon 3200+ Broadband connections TV Tuner for streaming and recording live TV (optional) Note: Slower internet connections may result in stuttering during playback. Installation and Setup Download and install Orb on your home computer. (Download link below) You’ll want to take the defaults for the initial portion of the install. When we get to the Orb Account setup portion of the install is when we will have to enter information and make some decisions. Choose your language and click Next. We’ll need to create and user account and password. A valid email address is required as we’ll need to confirm the account later. Click Next.   Now you’ll want to choose your media sources. Orb will automatically look for folders that may contain media files. You can add or remove folders click on the (+) or (-) buttons. To remove a folder, click on it once to select it from the list and then click the minus (-) button. To add a folder, click the plus (+) button and browse for the folder. You can add local folders as well as shared folders from networked computers and USB attached storage. Note: Both the host computer running Orb and the networked computer will need to be running to access shared network folders remotely. When you’ve selected all your media files, click Next. Orb will proceed to index your media files… When the indexing is complete, click Next. Orb TV Setup Note: Streaming Live TV to Macs is not currently supported. If you have a TV tuner card connected to your PC, you can opt to configure Orb to stream live or recorded TV. Click Next  to configure TV. Or, choose Skip if you don’t wish to configure Orb for TV.   If you have a Digital tuner card, type in your Zip Code and click Get List to pull your channel listings. Select a TV provider from the list and click Next. If not, click Skip.   You can select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Next choose an analog provider, if necessary, and click Next.   Select “Yes” or “No” for a set top box and click Next. Just as we did with the Digital tuner, select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Now we’re finished with the setup. Click Close. Accessing your Media Remotely Media files are accessed through a web-based interface. Before we go any further, however, we’ll need to confirm our username and password. Check your inbox for an email from Orb Networks. Click the enclosed confirmation link. You’ll be prompted to enter the username and password you selected in your browser then click Next.   Your account will be confirmed. Now, we’re ready to enjoy our media remotely. To get started, point your browser to the MyCast website from your remote computer. (See link below) Enter your credentials and click Log In. Once logged in, you’ll be presented with the MyCast Home screen. By default you’ll see a handful of “channels” such as a TV program guide, random audio and photos, video favorites, and weather. You can add, remove, or customize channels. To add additional channels, click on Add Channels at the top right…   …and select from the dropdown list. To access your full media libraries, click Open Application at the top left and select from one of the options. Live and Recorded TV If you have a TV tuner card you configured for Orb, you’ll see your program guide on the TV / Webcams screen. To watch or record a show, click on the program listing to bring up a detail box. Then click the red button to record, or the green button to play. When recording a show, you’ll see a pulsating red icon at the top right of the listing in the program guide. If you want to watch Live TV, you may be prompted to choose your media player, depending on your browser and settings. Playback should begin shortly.   Note for Windows Media Center Users If you try to stream live TV in Orb while Windows Media Center is running on your PC, you’ll get an error message. Click the Stop MediaCenter button and then try again.   Audio On the Audio screen, you’ll find your music files indexed by genre, artist, and album. You can play a selection by clicking once and then clicking the green play button, or by simply double-clicking.   Playback will begin in the default media player for the streaming format.   Video Video works essentially the same as audio. Click on a selection and press the green play button, or double-click on the video title. Video playback will begin in the default media player for the streaming format.   Streaming Formats You can change the default streaming format in the control panel settings. To access the Control Panel, click on Open Applications  and select Control Panel. You can also click Settings at the top right.   Select General from the drop down list and then click on the Streaming Formats tab. You are provided four options. Flash, Windows Media, .SDP, and .PLS.   Creating Playlists To create playlists, drag and drop your media title to the playlist work area on the right, or click Add to playlist on the top menu. Click Save when finished.    Sharing your Media Orb allows you to share media playlists across the Internet with friends and family. There are a few ways to accomplish this. We’ll start by click the Share button at the bottom of the playlist work area after you’ve compiled your playlist. You’ll be prompted to choose a method by which to share your playlist. You’ll have the option to share your playlist publicly or privately. You can share publically through links, blogs, or on your Orb public profile.  By choosing the Public Profile option, Orb will automatically create a profile page for you with a URL like http://public.orb.com/username that anyone can easily access on the Internet. The private sharing option allows you to invite friends by email and requires recipients to register with Orb. You can also give your playlist a custom name, or accept the auto-generated title. Click OK when finished. Users who visit your public profile will be able to view and stream any of your shared playlists to their computer or supported device.   Portable Media Devices and Smartphones Orb can stream media to many portable devices and 3G phones. Streaming audio is supported on the iPhone and iPod Touch through the Safari browser. However, video and live TV streaming requires the Orb Live iPhone App.  Orb Live is available in the App store for $9.99. To stream media to your portable device, go to the MyCast website in your mobile browser and login. Browse for your media or playlist. Make a selection and play the media. Playback will begin. We found streaming music to both the Droid and the iPhone to work quite nicely. Video playback on the Droid, however, left a bit to be desired. The video looked good, but the audio tended to be out of sync. System Tray Control Panel By default Orb runs in the system tray on start up. To access the System Tray Control Panel, right-click on the Orb icon in the system tray and select Control Panel. Login with your Orb username and  password and click OK.   From here you can add or remove media sources, add manage accounts, change your password, and more. If you’d rather not run Orb on Startup, click the General icon.   Unselect the checkbox next to Start Orb when the system starts. Conclusion It may seem like a lot of steps, but getting Orb up and running isn’t terribly difficult. Orb is available for both Windows and Intel based Macs. It also supports streaming to many Game Consoles such as the Wii, PS3, and XBox 360. If you are running Windows 7 on multiple computers, you may want to check out our write-up on how to stream music and video over the Internet with Windows Media Player 12. Downloads Download Orb Logon to MyCast Similar Articles Productive Geek Tips Stream Music and Video Over the Internet with Windows Media Player 12Enable Media Streaming in Windows Home Server to Windows Media PlayerStream Media from Windows 7 to XP with VLC Media PlayerShare Digital Media With Other Computers on a Home Network with Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

  Read the article

• Microphone on a Dell Vostro 3360

  - by Pilb

  After upgrading my vostro 3360 on Ubuntu 12.04, I saw that drivers were not available for this version (notably for network). So I decided to install 11.10 but the mic still doesn't work (notably on Skype, Gtalk etc.) I join the model of the audio device and the drivers which were installed before I upgraded to ubuntu 12.04 (I succeeded only in installing the network one) Can you help me to find the solution to this problem with my microphone? Thanks , Pilb. Message in French : Bonjour, Après que je me sois rendu compte d'une anomalie dans la gestion du micro (sous Gtalk), j'ai essayé différentes solutions sans succès (1 2 et 3) Mon ordinateur dell vostro 3360 m'a été livré sous ubuntu 11.10, j'ai voulu le mettre sous 12.04 mais les drivers n'étaient pas compatibles. Je suis donc revenu sur Oneiric mais sans les drivers installés par Dell en usine. néanmoins, j'ai pris soin de noter leurs références (sans toutefois savoir si le micro fonctionne avec ces pilotes, mais cela me semble possible). Pourriez-vous me dire s'il est possible d'installer ces pilotes ? Ou alors si vous avez une solution concernant ce problème de micro ? Modèle de la carte son : Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Alsa-hda-cirrus-oneiric driver in DKMS format (notamment) Dell-laptop-oneiric friver in DKMS format ethernet-alx oneiric driver in DKMS format Je vous remercie d'avance de votre aide et vous souhaite une bonne journée ! Pilb.

  Read the article

• sound stops working after a while in ubuntu 12.10

  - by clio

  i did a clean install on ubuntu 12.10. Everything seemed fine at first including sound but after a while it stopped working. To get is back i have to restart it, sometimes even more than once. Any idea on how to fix this? sudo aplay -L default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC665 Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=PCH,DEV=0 HDA Intel PCH, HDMI 0 HDMI Audio Output dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample mixing device dmix:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample mixing device dmix:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample snooping device dsnoop:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample snooping device dsnoop:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct hardware device without any conversions hw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct hardware device without any conversions hw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Hardware device with all software conversions plughw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Hardware device with all software conversions plughw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Hardware device with all software conversions

  Read the article

• Why am I getting this "Connection to PulseAudio failed" error?

  - by Dave M G

  I have a computer that runs Mythbuntu 11.10. It has an external USB Kenwood Digital Audio device. When I open up pavucontrol, I get this message: If I do as the message suggests and run start-pulseaudio-x11, I get this output: $ start-pulseaudio-x11 Connection failure: Connection refused pa_context_connect() failed: Connection refused How do I correct this error? Update: Somewhere during the course of doing the suggested tests in the comments, a new audio device has now become visible in my sound settings. I have not attached or made any new device, so this must be the result of of some setting change. The device I use and know about is the Kenwood Audio device. The "GF108" device will play sound through the Kenwood anyway, but not reliably: Command line output as requested in the comments: $ ls -l ~/.pulse* -rw------- 1 mythbuntu mythbuntu 256 Feb 28 2011 /home/mythbuntu/.pulse-cookie /home/mythbuntu/.pulse: total 200 -rw-r--r-- 1 mythbuntu mythbuntu 8192 Oct 23 01:38 2b98330d36bf53bb85c97fc300000008-card-database.tdb -rw-r--r-- 1 mythbuntu mythbuntu 69 Nov 16 22:51 2b98330d36bf53bb85c97fc300000008-default-sink -rw-r--r-- 1 mythbuntu mythbuntu 68 Nov 16 22:51 2b98330d36bf53bb85c97fc300000008-default-source -rw-r--r-- 1 mythbuntu mythbuntu 49152 Oct 14 12:30 2b98330d36bf53bb85c97fc300000008-device-manager.tdb -rw-r--r-- 1 mythbuntu mythbuntu 61440 Oct 23 01:40 2b98330d36bf53bb85c97fc300000008-device-volumes.tdb lrwxrwxrwx 1 mythbuntu mythbuntu 23 Nov 16 22:50 2b98330d36bf53bb85c97fc300000008-runtime -> /tmp/pulse-EAwvLIQZn7e8 -rw-r--r-- 1 mythbuntu mythbuntu 77824 Nov 1 12:54 2b98330d36bf53bb85c97fc300000008-stream-volumes.tdb And yet more requested command line output: $ ps auxw|grep pulse 1000 2266 0.5 0.2 294184 9152 ? S<l Nov16 4:26 pulseaudio -D 1000 2413 0.0 0.0 94816 3040 ? S Nov16 0:00 /usr/lib/pulseaudio/pulse/gconf-helper 1000 4875 0.0 0.0 8108 908 pts/0 S+ 12:15 0:00 grep --color=auto pulse

  Read the article

• How to switch sound-drivers, and to which? [AMD] Hudson Azalia Controller

  - by Anders Martini

  System settings/sound does not open, freezes and I have to force close. Speaker symbol with volume control does not open scroll-down menu, and there is no sounds. Many people have problems with Hudson Azalia in Ubuntu, but I found no working solution. I don't really understand much of this, but here are some more details: aplay -l : **** List of PLAYBACK Hardware Devices **** (after running this one, it starts some kind of process that doesn't get any results, and doesn't stop, terminal has to be shut down) lspci -vnn | grep -iA5 audio: 00:01.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Device [1002:9902] Subsystem: Hewlett-Packard Company Device [103c:184c] Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f0444000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel -- 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Hudson Azalia Controller [1022:780d] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:184c] Flags: bus master, slow devsel, latency 32, IRQ 54 Memory at f0440000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel It seems to me that I'm currently running hda Intel drivers on my AMD Hudson Azalia soundcard. I can't see what drivers this soundcard uses. Do I need any additional drivers for my soundcard, and where would I find them?

  Read the article

• Sound & video problem with Toshiba Satellite L35-SP1011

  - by Diego Garcia

  I've installed Ubuntu 10.04 on a Satellite L35-SP1011 and there's no sound. Actually i have many video problems cause i had to disable effect because when it had effect activated, laptop got frozen many times. I saw this problem but in older ubuntu versions and tried some fixes without success. Any idea on how to solve my audio and video problems? I've tried these instructions https://help.ubuntu.com/community/RadeonDriver without success. My video card is a ATI Express 200M. lspci output 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] complete lspci output at http://pastebin.com/AVk1WWQt Update #1 - It's the same on Ubuntu 10.10 and Kubuntu 10.10... Slow graphics, and no sound. Update #2 - Sound SOLVED I edited /etc/modprobe/alsa-base.conf in Ubuntu 10.10 and added options snd-hda-intel model=asus Now i'm working on video, I added xorg-edgers ppa, updated and upgraded without big difference... it's working better but without transparency.

  Read the article

• Why is my Internet connection randomly dropping?

  - by Jeanno

  Ever since I have installed 12.04 (clean install not an upgrade), i have been having a drop in the Internet connection. The drop in the connection can be anything from 15 seconds to about 3 mins, and then the connection comes back. This behaviour happens while I am actively browsing the Internet, or if I wake up the computer and open Firefox (sometimes I have connection and sometimes I don't) . Please note that when the internet connection is on, it is not slow (as speedtest.net results show) In the beginning, I thought it was a problem with the driver r8169 for my RTL8111/8168B Ethernet card, so I downloaded the r8168 from Realtek website, followed the detailed instructions (blacklisted r8169, changed the file to '.bsh' ...), but still the same problem persisted. So I switched to a wireless connection, and I got the same problem with internet connection dropping randomly. Any ideas? Thanks in advance Output from 'lspci -v' Code: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-fa0fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-f60fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f6108000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f6107000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f6100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fa400000-fa4fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Prefetchable memory behind bridge: 00000000dc100000-00000000dc1fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa300000-fa3fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa200000-fa2fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f6106000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at f6105000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Dell Device 04a7 Flags: medium devsel, IRQ 5 Memory at f6104000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=128M] Memory at d8000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fa080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 02:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f4000000 (32-bit, non-prefetchable) [size=32M] Memory at c0000000 (64-bit, prefetchable) [size=128M] Memory at c8000000 (64-bit, prefetchable) [size=64M] I/O ports at d000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f6080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa400000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 51 I/O ports at c000 [size=256] Memory at dc104000 (64-bit, prefetchable) [size=4K] Memory at dc100000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8168 Kernel modules: r8168 05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fa300000 (64-bit, non-prefetchable) [size=2K] I/O ports at b000 [size=256] Capabilities: [50] Power Management version 3 Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [98] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [130] Device Serial Number 00-10-dc-ff-ff-cf-56-1a Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 19 I/O ports at a040 [size=8] I/O ports at a030 [size=4] I/O ports at a020 [size=8] I/O ports at a010 [size=4] I/O ports at a000 [size=16] Memory at fa210000 (32-bit, non-prefetchable) [size=512] Capabilities: [8c] Power Management version 3 Capabilities: [50] Express Legacy Endpoint, MSI 00 Kernel driver in use: ahci Note that my wireless card is not showing, I have the Ralink 3390 card (which apparently does not show up on Ubuntu for some reason), however I am able to connect to wireless network and connect to the internet (when it is working)

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >