Search Results

Search found 8706 results on 349 pages for 'boot camp'.

Page 75/349 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

  • Mac questions: installing TrueCrypt and Windows 7

    - by KeyStroke
    Hi, I'm about to buy a Mac laptop, but I need to be able to use Windows 7 as well + encrypt the HDD with TrueCrypt (or a better alternative for the mac). My questions are: 1) How well does Windows 7 perform under boot camp? 2) Will I be able to encrypt the whole HDD (with TrueCrypt or whatever else) and still use boot camp to dual-boot? Your help is much appreciated

    Read the article

  • Save kernel on Acer Aspire One270 with Ubuntu 12.10 - Booting Issues

    - by Sascha Klocke
    I did search the forums for quite some time, yet did not find any answer to my problem... I have an Acer Aspire One D270 with Windows 7 Starter and I've installed Ubuntu using the Wubi installer. When I boot to Windows 7, everything works fine, however, when I try to run Ubuntu, it gets stuck on a black screen at stopping kernel messages (or other lines), followed by some lines with [ 20.....] and won't continue... Could anyone point me to a solution to this problem?

    Read the article

  • USB: Missing Operating System - MAC

    - by Viraj Rao
    Have installed Ubuntu 11.10 on USB using Live CD. Followed the steps as provided in below link https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation After installation is complete in Refit menu, when i click on Linux icon I receive "Missing Operating System" message. I followed the steps provided in the below link from this forum, but am still receiving the same message. Unable to boot: Missing Operating system Any assistance is highly appreciated.

    Read the article

  • 2 windows loaders after grub2 repair

    - by adi
    I have recently reinstalled w7 and had ubuntu 12.04 lts installed on it,w7 installation deleted the grub2 loader,after that i found solution to use boot-repair from live-cd session, BUT......now i have 2 windows 7(loader)in grub loader,and only 1 windows 7 installation,how can i remove it?One is on on /dev/sda1(which should be w7 sistem reserved partition) and second is on on /dev/sda2(which is w7 installment partition) it says and both log on same w7.All i need is to remove it without brake the grub2 again and if someone is willing to guide me to add windows on primary selection, cause my girlfriends doesnt get along with linux :D.

    Read the article

  • How to make a directory with permanent permissions different from default

    - by Carlos Fernández San Millán
    I have system-wide default permissions set with umask 027. I am in the need to make a directory whose sub-directories would need 775 permission and whose files would need 664 permissions and make these permissions permanent after booting the system. I am looking for the best options out there without compromising security. Any ideas? Thank you. Some research done: sudo chfn -o "umask=002" daemon_username bash script running at boot with umask 022 on the desired directory

    Read the article

  • Unable to install any linux based os in my notebook

    - by Nawin SS
    I tried to install ubuntu 11.04 and 12.04 both with wubi and with dvd.With wubi even when the installation is successfull the os wont boot after some time.and with dvd it shows error "0x0009"and the intallation stops. The same is the case with any linux based os i try to install.With fedora the installation stops after the display,"Detecting hard drive...".Are there any settings that must be changed in my system. Please instruct me how to overcome this obstacle.I am stuck..!

    Read the article

  • Windows Azure Boot camp &ndash; Raleigh Wednesday June 23, 2010 * FREE*

    - by Jim Duffy
    Yes I know this is my second blog post about the free one-day Windows Azure boot camp on June 23rd in Raleigh, NC. What can I say I don’t want anyone to miss out on an opportunity to take advantage of some free Windows Azure training. Microsoft Developer Evangelist Brian Hitney and I will be presenting a one-day Windows Azure boot camp on June 23rd in Raleigh, NC at the Microsoft RTP offices. For more information on content, what to bring, directions, etc. just click here to go to the information and registration page for the Raleigh event. To find other dates and locations for the Windows Azure boot camps  head over to the Windows Azure Boot Camp page. Brian and I hope to see you there! Have a day. :-|

    Read the article

  • How do I set up multiple HDD?

    - by mark kirby
    I got some new hard discs and would like to set my PC up in the following way: Ubuntu is currently installed on one drive I want to put Windows on a second drive I would like a third drive for shared content (music and stuff) that both OSes can access What I need to know is what format should the content drive be? How should I configure the drive order in my bios for GRUB to be boot manager and how to configure GRUB for multi-HDD booting?

    Read the article

  • What Does My BIOS Do After Booting?

    - by Jason Fitzpatrick
    Once your computer finishes the boot process and you’re firmly inside the operating system buzzing along, is there anything left for the BIOS to do? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

    Read the article

  • After GRUB loads linux: No init found.

    - by Kaustubh P
    When I start Ubuntu from the grub, I get a strange message, and a medieval prompt as: No init found Busybox v1.15.3(ubuntu 1.1.15 3-ubuntu5) built in shell (ash) Enter 'help' for a list of commands (initramfs)_ I use a dualboot system, with Ubuntu Meerkat, and Windows 7. Is there any chance of recovery? Thanks. EDIT: The PC on a whim decide to boot itself up, and so I couldnt try the solution mentioned below. I will accept the answer anyway.

    Read the article

  • installation ubunto 14.01 on a different partition with windows 8.1

    - by bilel abidi
    Please assist me. I am eager to install Ubunto 14.01 on a different partition but I do not know how to do it. I have HP with windows 7 pre-installed then I upgraded to windows 8.1 please show me how to make a dedicated partition to install ubuntu 14.01. please find the partition that I have. I appreciate your help on a I have : partition : /dev/sda1 NTFS label system 922.50KB /dev/ sda2 NTFS 199.00MIB flags : boot /dev/sda3 NTFS label receovery 488.77 GB /dev/sda4 unknown 16 GB unallocated 1 MIB

    Read the article

  • atftp pcre pattern

    - by CE-SA
    I've a question about the package named 'atftp'. I've got the atftp daemon finally working. Previously I was using tftp-hpa with a custom rule that replaces filenames with capitals into non-capital filenames and replaces the backslashes into forward slashes so that WinPE will boot fine. But in atftp I can't find rules or replacements like that. I'm searching for long, but cannot find or write the right pcre-pattern. Could you help me with this?

    Read the article

  • Ubuntu is booting on acer e1-510 laptop, but screen displays nothing

    - by user287602
    Tried loading ubuntu 12.04 (32-bit as well 64 bit) through bootable usb , on a brand new 64-bit acer E1-510 laptop. It shows the 'Try ubuntu without installing screen' and I selected that option. But instead of showing ubuntu's logo(which implies it is loading). I get a blank screen. The screen is on, but it shows nothing. I tried the same on an old model laptop acer aspire 5738 and it worked like a charm. However, I realized that Ubuntu is actually booting on E1-510 and only the display is not working. How did I arrive at this conclusion? When I select on 'Try ubuntu without installing screen', after about 8-10 seconds I see that the WiFi indicator light on the laptop panel switches on(just like when we boot up a Windows OS or even Ubuntu ). I got an idea that the system booted Ubuntu. To confirm this, I tried to adjust volume using keyboard shortcuts. Voila, I can hear the sound of adjusting volume! That means it has already booted Ubuntu. I confirmed this with another step. I pressed the power button once and after two seconds I pressed ENTER. It began the process of switching off and within 5 seconds the laptop was powered off. You may ask, Why is this a confirmation that Ubuntu has booted? This is because in Ubuntu when you press on power button, a dialog box opens with shut down, restart, suspend option- and the shut down option is already selected by default; so all I have to do is press ENTER to shut down. This again proved that Ubuntu was indeed up and running. Unlike previous 'AskUbunutu' posts about Acer e1-510, I must mention that my laptop came WITH the Legacy BIOS mode, so its not really a problem to boot ubuntu from a bootable pendrive. Only the screen is not working. In case you need to know, I am running Windows 7-Ultimate 64 bit on acer e1-510.

    Read the article

  • Message "Sparse file not allowed" after succesfull install without swap-partition

    - by FUZxxl
    I've installed Ubuntu without creating a swap partition and with / on a btrfs.# Now I get the message "Sparse file is not allowed" on each boot. This message appears before the splash-screen. Is there a way to kill this warning? # I use some programs that tend to get havoc on memory usage. To prevent them from killing my system, I let the OOM killer do the rest when out of memory rather than making my system unreasonably slow by excessive swapping.

    Read the article

  • Can't start ubuntu on Vaio Z

    - by teocomi
    Hello, I'm trying to install Ubuntu 10.10 32bit on this pc. I have both tried with Wubi from Windows and from USB stick, but after the installation process when I select to boot Ubuntu the screen becomes black and nothing happens (btw I can hear the cpu running)! Notice that maybe it is something related to the graphic card of the pc, since when I use Ubuntu in live mode or during the installation process all the graphics and colors are messed up as if there wasn't an appropriate diriver... What can I do?? Thanks

    Read the article

  • Ubuntu boots to orange screen after install

    - by musicalfish8
    I have a problem in which I boot my computer and everything works normally, I see a purple screen with various partitions to select such as my Windows 7 and Ubuntu partitions. When I select the Ubuntu one, my computer boots to an orangish screen and plays what sounds like a drum sound once. Then nothing happens and I have to reboot my computer because the computer is stuck at this orange screen. EDIT: My hardware is: Asus M5A97 motherboard AMD Phenom II 630 processor MSI r6670 MD1GD5 GPU TrendNet TEW-641PC Wireless Card

    Read the article

  • Unable to install any linux based os in my HP PAVILION DV6 notebook

    - by Nawin SS
    I tried to install ubuntu 11.04 and 12.04 both with wubi and with dvd.With wubi even when the installation is successfull the os wont boot after some time.and with dvd it shows error "0x0009"and the intallation stops. The same is the case with any linux based os i try to install.With fedora the installation stops after the display,"Detecting hard drive...".Are there any settings that must be changed in my system. Please instruct me how to overcome this obstacle.I am stuck..!

    Read the article

  • Fail to start windows after Ubuntu 11.10 install

    - by user49995
    Computer: HP Pavilion dv7-6140eo OS: Originally Win7 I recently decided to try out Ubuntu, and I decided to dual-boot it with Windows 7. First I googled some how-to's, then I downloaded Ubuntu onto a memory stick and made a second partition (I originally only had one partition that I shrunk and used the unallocated space to install onto during the Ubuntu install). During the install I set format type to xt4 (or something, it was the default option), chose the "in the beginning" option and set the last option as "\". The install was successful. Although, when I restarted my computer I weren't able to choose which operating system to start; it went right into windows. After showing the windows logo for half a second before rebooting, I get a blue screen (see bottom of the page). Trying to fix it, I deleted the newly made partition I had just installed Ubuntu onto (seeing it wasn't working either). This made no difference. I proceeded with installing Ubuntu again, so I would at least have a functioning computer, and now Ubuntu works fine (on it now). The only difference on start-up is that I get a Grub window asking me to between several options including Linux and Windows 7 (loader). Now, if I choose Windows 7, I get the message "Windows was unable to start. A recent software or hardware change might be the cause". It recommends me to choose the first option of the two it provides; to start start-up repair tool. The second option being starting windows normally. If I start windows normally, the same thing happens as earlier. My computer does not have a windows installation CD. Although, it has (at least it used to, if I haven't screwed that too up) a 17gb recovery partition. In addition I made an image of the computer onto a external hard drive when I first got it. Though, I have no idea how to use either. If anyone has any idea how I can make windows work again or reinstall it (already backed up my files) it would be greatly appreciated. I still prefer to dual boot between the two functioning operating systems, but I will settle for a functioning windows 7. Thanks a lot for any replies. Blue screen: A problem has been detected and Windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove and newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configures and terminated. Run CMKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: **STOP: 0x0000007B (0xFFFFF880009A97E8,0xFFFFFFFFC0000034, 0x0000000000000000,0x0000000000000000

    Read the article

  • Live-Ubuntu 12.04 ran fine, now stopped booting!

    - by user89743
    I've seen similar problems to this several times in the forum, but mine is a bit different, so the other posts I saw were no help to me. When I boot Ubuntu 12.04 64-bit from live-SD-card (3GB persistence) I suddenly get this error: (initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Invalid argument Can not mount /dev/loop/0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs (it says I can type "help" for commands, but I don't know anything about how to go from there, totally new to linux) The reason I say my case is different is because my Ubuntu worked fine for over a week, even pretty fast, and now this problem happened. Before that I used to run my live ubuntu from USB sticks but that was slower (especially when booting which took 15 minutes from USB stick!). Also I kept getting the same above problem after a while when booting and had to re-create a live USB linux several times. Installing on harddrive is not an option because my harddrive has physical damage and getting a replacement will take a while, therefore I can only use live-USB or live-SD-card Ubuntu. As I said I used Ubuntu without problems for more than a week, before that as well for several weeks on USB sticks, but the above problem occured sooner or later. This time I paid attention to when it happened: I was rebooting my computer (HP 620 laptop, 4 GB RAM, 64 bit system) from SD flash card and when I was booting I selected F6 and then the first option "no acpi" or something like that...I had used it before and noticed it slowed down the time it took Linux to use. This time it caused this error. Now even when I boot normally/default I get this error. Now I'm accessing Ubuntu from my USB stick without persistence file, when I check my SD card, all the files mentioned in the error message are there and the filesystem.squashfs is 691.2 MB so nothing seems to have been deleted by accident. (I have already made many changes/downloaded programs to my SD card persistent Ubuntu and would hope to loose them, since downloading is expensive for me, and since the problem seems to re-occur...) Can anyone help me, preferably without having to create another startup disk on my SD card? I'm totally new to this. Sorry for the long posts, just didn't know what info is relevant and what isnt! Kon

    Read the article

  • orange screen with vertical stripes

    - by Skapeven
    After having installed Ubuntu without Internet conecction, I restart the PC, go to BIOS, change boot priority to internal harddrive, save and exit. Then the PC starts again but the screen gets orange with vertical stripes and stays like that. I tried both versions 64 bit and 32 bit 12.04. I can't use internet before having Ubuntu, because y have to make a network configuration(this is not allowed in the trial version before the installed version).

    Read the article

  • Ubuntu take hours to start!

    - by y2b4u3d
    I have installed Ubuntu 11.10 as my only OS after I formatted Windows XP but after the installation finished it took four hours to boot and start working it just was stuck in that purple screen with nothing on it!!! But if I unplug the power and start my PC again it start after bring me the grub option... What should I do to make em start just as easy as any OS do! my RAM is 1 GB, 80GB HDD, ASROCK.

    Read the article

  • Can not install Ubuntu on Samsung Ultrabook Series 5 (Win 7!)

    - by Torsten
    I have a Samsung Ultrabook Series 5 with Windows 7 (which I want to keep)... I can boot from a USB stick without a problem and ubuntu work fine, but when I want to install it, the installation progress is stopped and it won't go further. It stop with the message: Checking filesystem Before that, I got also a message, that the system can't unmount the /cdrom (which the ultrabook doesn't have!) Thank you very much for help!

    Read the article

  • Installing Ubuntu on Asus A43SM

    - by Subangkit
    i've Asus Laptop A43SM the specifications can be seen here. I am trying to install Ubuntu 12.04 LTS on my laptop, but something wrong is happening. When I boot up Ubuntu on this laptop the first screen Ubuntu loader shows up, but then it freezes; I can't do anything but push the power button. I've tried to use a usb drive and a CD but that doesn't help. Anyone can tell me how to install Ubuntu ?

    Read the article

  • Why am I having so many problems installing Ubuntu 13.10 alongside Vista?

    - by Matt Gazaway
    I am trying to setup my laptop to dual boot Ubuntu 13.10 and Windows Vista. I get as far as the drive table and it either freezes up or I get an error saying "unable to satisfy partition parameters" or something very similar. Now I just have a black screen with alternating indications that a request for cache data failed and something to do with a "write through". Any ideas on what I might be doing wrong?

    Read the article

  • How can I set up a regex to rename files automatically for Atftp?

    - by CE-SA
    I've a question about the package named 'atftp'. I've got the atftp daemon finally working. Previously I was using tftp-hpa with a custom rule that replaces filenames with capitals into non-capital filenames and replaces the backslashes into forward slashes so that WinPE will boot fine. But in atftp I can't find rules or replacements like that. I'm searching for long, but cannot find or write the right pcre-pattern. Could you help me with this?

    Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >