Search Results

Search found 12353 results on 495 pages for 'desktop composition engin'.

Page 75/495 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• Ubuntu 10.10 Ad-Hoc Setup (from Wireless Router, to Ubuntu Server/Desktop to Wireless Router)

  - by user60375

  Okay, so I know there are different approaches for this, but I will explain my story briefly before getting to the technical stuff. My fiancée and I are going through some financial issues (as I assume a lot of us are). We ended up having to move from our house and stay with some friends/family for 6 months, just to get ourselves caught up. (Medical bills, among other issues,etc). So this is where it gets fun. At our friends house, we are staying in the loft setup which is not near the cable modem and wireless router. I have a "hand-crafted" media center running XBMC, an Ubuntu 10.10 Server/Desktop (multi-purpose, very powerful and tons drive space), two working laptops, a between the two of us we have multiple wireless devices/phones. Now our friends Wireless router doesn't have any options for assigning IP addresses, but my router does. My current setup is: Friends Cable Modem -- Friend's Wireless Router -- Ubuntu 10.10 Server -- My Wireless Router (local-link from Friend's wireless (incoming) to sharing connection on ETH0 (outgoing)) -- to all devices. (Wireless Modem, Ubuntu Server that share's it's wireless incoming connection to the ethernet port my Wireless router share's with the rest of the devices). I setup my router to use default settings from my friend's router, using Google's DNS on my router (disabled DNS setup on Ubuntu Server), everything is assigned nicely and runs smooth. My Ubuntu server was given the address 10.42.43.1 (assuming standard from Network-Manager). (On the Ubuntu machine that shares to my wireless router; I have some server apps installed, but mainly just use Samba/NFS/Tangerine action. My problem/goal is that every device has no problem of accessing the internet from my router, the media-center has an assigned ip address, all services from all devices (ZeroConf, Avanhi, Bonjour, GIT, SSH, FTP, Apache2, etc) all work correctly except from my Ubuntu Server (which serves the wireless connection to ETH0 to another Wireless Router). The Ubuntu 10.10 Server/Desktop is not broadcasting anything (the Zeroconf Service Discovery 0.4 Gnome Applet shows the services from the Ubuntu server but no other computers can see them). I can access it from my Media-Center (Running Xbuntu 10.04) if I direct it to 10.42.43.1, no problem. But I cannot access Tangerine (Daapd) and the Samba shares do not show up on any computers for 10.42.43.1 (not in the WORKGROUP which Samba is setup simple and default but I can direct computers to that address and the shares will add except on a damn Windows 7 parition). Is this an issue with how I have my router setup and possible the gateway? An issue with Network-Manager? And issue with my Ubuntu Server/Desktop? I know there is a lot to that, but it's simpler than I probably have explained? Any help would be appreciated. If you need more details, I can provide them. If there is a better way of my attempting this home-network, please let me know. Thanks in advance for the help.

  Read the article

• Acer Aspire one is falling apart on Ubuntu

  - by Narcolapser

  Question: How do I have my netbook detect and install hardware? Info: I have an Acer Aspire One, it came with windows XP and I loaded it with Win7. I decided I wanted to change to Ubuntu so I tried Ubuntu netbook remix, which failed horribly, and so after attempting 3 or so other OS's I ended with Ubuntu Desktop 9.10. Which worked fine for a while, but there were some minor issues so I asked a question about it here and decided to change my OS again. This last weekend I tried mandriva like that guy in my other question suggested, no success. when I had though my netbook lost the ability to use it's touch pad, I didn't think much of it, just thought it must be a driver or something. But When Mandriva failed, and I also while I was at it tried Damn small linux and Debian, which both failed to, I decided to switch back to Ubuntu Desktop(some where in here my keyboard stopped working for one attempt to). But first I gave the netbook remix one more try. it worked this time, with the exception of it didn't have any networking. I thought it was a driver issue again and finished the weekend with ubuntu desktop 9.10 again. But now things get really crazy. it doesn't know it has a wireless card or an ethernet card. It doesn't know my phone is connected trying to provide wireless broadband either. I'm clueless on what could be the problem. And with only a minimal amount of experience with Ubuntu can't navigate the entire interface with only my keyboard(it doesn't detect a USB mouse when I plug it in, it had when I installed it. in fact the network interfaces were working just fine when I live boot ubuntu to installed it). Even so, I don't know where to go or what to do to make it recognize it's hardware. I'm in a dire situation, any help is welcome.

  Read the article

• Looking for an application that scrolls or pans netbook screens running Windows

  - by Rob

  I'm looking for a Windows 7 and XP compatible Windows desktop panning/scrolling tool. This is to solve a problem where some applications for example MSN have settings/preference Windows that are not resizeable. I have a Netbook with a small maximum screen resolution e.g. 1024x600. The fixed non-resizeable windows are too large for this display screen size so I cannot see all of the items on these windows, particularly the OK button to save settings. What I would like is a desktop scrolling/panning tool where if I move my mouse pointer to any edge of the display, it pans to show the region of the too-large-fixed window that I could not see. I use a Samsung N110 and Toshiba NB100 netbooks. I'm looking for: A general program that provides desktop panning/scrolling/expanded resolution to allow all regions of a non-resizeable fixed window Preferably a non-graphics hardware specific program but will accept a solution that works with both the above machines I'm NOT looking for (i.e. unsatisfactory answers others have asked that I've already searched and found): Advice on what programs to use that DON'T have the problem of fixed windows Alternative operating system solutions Plugging in an external monitor with larger resolution - I use this option but I need a solution when one is not available, e.g. while travelling etc Advice about not using small screen netbooks - I enjoy the compact convenience of them Advice about change the dpi settings in the Control Panel Display settings Advice about guesswork with the tab key to move the focus the off-screen item I cannot see Thank you in advance.

  Read the article

• Diagnosing Logon Audit Failure event log entries

  - by Scott Mitchell

  I help a client manage a website that is run on a dedicated web server at a hosting company. Recently, we noticed that over the last two weeks there have been tens of thousands of Audit Failure entries in the Security Event Log with Task Category of Logon - these have been coming in about every two seconds, but interesting stopped altogether as of two days ago. In general, the event description looks like the following: An account failed to log on. Subject: Security ID: SYSTEM Account Name: ...The Hosting Account... Account Domain: ...The Domain... Logon ID: 0x3e7 Logon Type: 10 Account For Which Logon Failed: Security ID: NULL SID Account Name: david Account Domain: ...The Domain... Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x154c Caller Process Name: C:\Windows\System32\winlogon.exe Network Information: Workstation Name: ...The Domain... Source Network Address: 173.231.24.18 Source Port: 1605 The value in the Account Name field differs. Above you see "david" but there are ones with "john", "console", "sys", and even ones like "support83423" and whatnot. The Logon Type field indicates that the logon attempt was a remote interactive attempt via Terminal Services or Remote Desktop. My presumption is that these are some brute force attacks attempting to guess username/password combinations in order to log into our dedicated server. Are these presumptions correct? Are these types of attacks pretty common? Is there a way to help stop these types of attacks? We need to be able to access the desktop via Remote Desktop so simply turning off that service is not feasible. Thanks

  Read the article

• Windows 2008 R2 RDS - Double Login

  - by colo_joe

  Issue: Double logins when connecting to RemoteApps or Remote Desktop Environment: Gateway = 1 server 2008 R2 - Roles = Gateway, Session Broker, Connection Mgr, Session Host Configuration server Session hosts = 2 servers 2008 R2 - Roles = App Manager and Session host configuration Testing: I can get to the url http://RDS.domain.com/rdweb - I get prompted for authentication (1) Pass authentication, get list of remote apps. Click on remoteapps or remote desktop, get prompted for authentication again (2). Pass authentication, I get access to app or RDP. Done so far. On session host Signed rdp files with cert. Added the following to the custom RDP settings: Authenticaton level:i:0 = If server authentication fails, connect to the computer without warning (Connect and don’t warn me). prompt for credentials on client:i:1 = RDC will prompt for credentials when connecting to a server that does not support server authentication. enablecredsspsupport:i:1 = RDP will use CredSSP, if the operating system supports CredSSP. Edited the javascript file as found in http://support.microsoft.com/kb/977507 Added Connection ID, and added Web Access server to TS Web Access Computers group on the Session host servers, and Signed apps as found in hxxp://blogs.msdn.com/b/rds/archive/2009/08/11/introducing-web-single-sign-on-for-remoteapp-and-desktop-connections.aspx Note: This double login happens internally and externally.

  Read the article

• Remote mouse pointer not visible in VNC

  - by aef

  I used VNC desktops as a kind of collaboration server, as shared planning and pair programming environment for a long time. Now my latest iteration uses a KVM guest running Fedora 17 "Beefy Miracle", the Cinnamon desktop environment and an X11VNC server. The X11VNC server is automatically started with the desktop environment using the following command: x11vnc -localhost -many -shared -display :0 -bg My problem is that depending on the VNC client, the mouse pointer of the remote system which is shown through VNC is not synchronized to my client. I really need this, so I can see what my partner is doing on the desktop. When using Vinagre 3.2.1 on Ubuntu Oneiric Ocelot (11.10) or Vinagre 2.3.0.3 on Debian Squeeze (6.0) and I don't have my local mouse pointer inside the VNC view, I cannot see the mouse pointer of my remote system, nor its movement. When using TightVNC on Windows 7, I can recognize a mouse pointer trace for very short amounts of time after moving the mouse, but it is not clearly visible. Using UltraVNC on Windows 7 the mouse pointer is clearly visible all the time. With Gnome 2 I never had any problems with remote pointer synchronization, using exactly the same clients. I suspect this could have something to do with Cinnamon's dependency on 3D acceleration. On the other hand, it doesn't change anything to start Cinnamon's fallback environment Cinnamon 2D. Update: Same effect when I use Gnome 3.

  Read the article

• Find whether TV supports S Video

  - by Vik

  Hello Freinds I have a TV (some unknown model) which has 3 sockets to insert 3 wires red, yellow and white. A DVD Player can be connected to the TV using sockets and the TV displays that the TV is in AV mode when DVD is running. Now i have a Desktop which has a S Video Port and i have a wire to connect the S Video port from my computer to those red, yellow and white sockets using appropriate pins. Now i have searched all over the remote and it does not switches to S Video Mode, it has only 2 modes of operation i.e. 1 Cable Connection (Third Party DTH Receiver receives channels and i pay subscription) and 2 AV Mode. It does not have S Video Mode or any other mode. Now my question is whether i can connect the S Video cable from my desktop to the above described TV or i should look for a new TV if i wish to connect the S Video from Computer to TV or there is any sort of converter that can help? I did tried connecting the S Video cable from Desktop to TV, but it did'nt worked. TV kept on displaying Blue Screen of AV Mode. Regards

  Read the article

• Why does HP Update at remote system trigger RDP printing at local system?

  - by lcbrevard

  This is obscure. When connected with RDP to another system that has HP Update installed on it, either directly running the HP Update or having the notification pop up to ask if you want to run HP Update causes the local system to try to print something to peculiarly-chosen-local-printer. Case 1: Desktop Win 7 Ult system RDP connected to HP Laptop Win 7 Ult system. When HP Update runs on the laptop a dialog for XPS Writer Save As... appears on Desktop system. Even if you put in a name, nothing gets generated and the dialog repeats. And repeats. Until you (a) close the RDP connection and (b) clean out the queued entries. If the HP Update pops up the request to run the update and you are not at the desk when this happens, there can be dozens of queued requests for this bogus printing. NOTE: the XPS Writer is not selected as a default printer on either system. Case 2: (Different) HP Laptop Win 7 Ult system RDP connected to XP Pro "brand X" desktop system but with HP printer drivers installed. If the request to run HP Update notification pops on the XP system, dozens of attempts to print, in this case to a Versa Check Printer driver, are queued. Dismissing the HP request, closing RDP, and cleaning out the queue are required to stop this. NOTE: the Versa Check Writer is not selected as a default printer on either system. THE QUESTION: What the heck is going on here? Some kind of scripting or COM activity that is misdirected?

  Read the article

• Looking for an application that scrolls or pans netbook screens running Windows

  - by therobyouknow

  I'm looking for a Windows 7 and XP compatible Windows desktop panning/scrolling tool. This is to solve a problem where some applications for example MSN have settings/preference Windows that are not resizeable. I have a Netbook with a small maximum screen resolution e.g. 1024x600. The fixed non-resizeable windows are too large for this display screen size so I cannot see all of the items on these windows, particularly the OK button to save settings. What I would like is a desktop scrolling/panning tool where if I move my mouse pointer to any edge of the display, it pans to show the region of the too-large-fixed window that I could not see. I use a Samsung N110 and Toshiba NB100 netbooks. I'm looking for: A general program that provides desktop panning/scrolling/expanded resolution to allow all regions of a non-resizeable fixed window Preferably a non-graphics hardware specific program but will accept a solution that works with both the above machines I'm NOT looking for (i.e. unsatisfactory answers others have asked that I've already searched and found): Advice on what programs to use that DON'T have the problem of fixed windows Alternative operating system solutions Plugging in an external monitor with larger resolution - I use this option but I need a solution when one is not available, e.g. while travelling etc Advice about not using small screen netbooks - I enjoy the compact convenience of them Advice about change the dpi settings in the Control Panel Display settings Advice about guesswork with the tab key to move the focus the off-screen item I cannot see Thank you in advance.

  Read the article

• how do I import a targa sequence as a composition in after effects cs4 ?

  - by George Profenza

  I am a complete n00b with After Effects now, but I want to achieve something basic. I have a sequence of TARGA(.tga) files named alphanumerically(name_0000, where 0000 is the frame). I want to import those as a composition. What I'm after is having each .tga file siting in the timeline in sequence. I tried File Import File, selected the first, then selected the last, holding Shift, and ticked sequence, but I cannot select Composition from that Dialog, I can only select Footage and I don't knwow why. Hints ?

  Read the article

• Desktop SATA drives in SATA <-> FC array

  - by chris

  Let's assume you've got a box like one of these with space for 24 SATA disks. What are the best bits of advice for deploying this? For instance, should you be greedy and go for the 1.5 or 2tb disks or are they just not reliable enough to be used in an array like this and you should stick with 640gb or 750gb disks instead? Also, I know that FC (or generically, "enterprise class") disks have a different error recovery strategy than desktop disks. An enterprise disk will fail a read quickly and report to the controller that it wasn't able to read that block, and the RAID controller will quickly regenerate the info from the parity disk and mark the block as bad. A desktop disk, on the other hand, will try and try and try again to get the data, and in pathological cases this may cause a raid controller to fail the whole disk because the read operation times out. So there are a couple aspects to this question: What's the best sort of disk to get today? (ie specific disks on the market in Feb 2010) Generically, what should someone look for when trying to buy something like this that kinda walks the line between enterprise and consumer? Lastly -- is there anything that can be done with current "consumer" disks to make them more suitable for array use? IE can you use a SMART configuration to change the error recovery strategy used by the disk? Thanks!

  Read the article

• How to use gnlcomposition to concatenate video files?

  - by Hardy

  Hi All, I am trying to concatenate two video files with the gnonlin components of the gstreamer. The pipeline I am using is gst-launch-0.10 gnlcomposition { gnlfilesource name="s1" location="/home/s1.mp4" start=0 duration=2000000000 media-start=0 media-duration=2000000000 gnlfilesource name="s2" location="/home/s2.mp4" start=2000000000 duration=2000000000 media-start=0 media-duration=2000000000 } ! queue ! videorate ! progressreport name="Merging Progress" ! ffmpegcolorspace ! ffenc_mpeg4 ! ffmux_mp4 ! filesink location="/home/merge.mp4" As a result I am getting only the second file for the duration specified in the parameters. Tried several things and also searched on google but I could not figure out the problem with the above command. Can anyone point what i am doing wrong? Any other way of concatenating multiple files into one based on time is welcome too. Thanks

  Read the article

• How do I stop inheritance in xaml?

  - by cfouche

  Hi Let's say I have some Control that has been disabled. It contains a bunch of elements, but I want one of those child elements to remain enabled. Something like this: <ContentControl IsEnabled="False"> <Border> <Button Content="Button" IsEnabled="True"/> </Border> </ContentControl> So in this example, the Button's IsEnabled="True" setting gets overridden by its parent. Is there a way of stopping this from happening? This seems like a strange thing to be doing, but I have a situation where, when a Control is disabled and a user mouses down on it, I still want an event to be triggered. I read in WPF Unleashed that wrapping something in a Frame control, "..isolates the content from the rest of the UI [and] properties that would normally be inherited down the element tree stop when they reach the Frame", but wrapping the Button in the example above in a Frame doesn't work. Am I on the wrong track here?

  Read the article

• Why change from WPF to Silverlight 4?

  - by stiank81

  I'm working on an application we made WPF instead of Silverlight as we wanted a full blown desktop application with the whole unique feeling and advantages that gives. However, with the announcement of Silverlight 4 I hear there is a buzz about Silverlight mostly being the preferred choice also for desktop applications. So; why should I consider moving my WPF application to Silverlight 4 - given that I still want a desktop application?

  Read the article

• Pattern for sharing data between views (MVP or MVVM)

  - by Dovix

  What is a good pattern for sharing data between related views?. I have an application where 1 form contains many small views, each views behaves independently from each other more or less (they communicate/interact via an event bus). Every so often I need to pass the same objects to the child views. Sometimes I need this same object to be passed to a child view and then the child passes it onto another child itself contains. What is a good approach to sharing this data between all the views contained within the parent form (view) ? I have looked into CAB and their approach and every "view" has a "root work item" this work item has dictionary that contains a shared "state" between the views that are contained. Is this the best approach? just a shared dictionary all the views under a root view can access? My current approach right now is to have a function on the view that allows one to set the object for that view. Something like view.SetCustomer(Customer c); then if the view contains a child view it knows to set it on the child view ala: this.childview1.SetCustomer(c); The application is written in C# 3.5, for winforms using MVP with structure map as a IoC/DI provider.

  Read the article

• Skydrive for desktop not showing icon in notification area

  - by jeruntime

  is this normal behavior? I'm concerned that some files will not be transferred. For example. I need to be sure that its safe to put my laptop to sleep so that later when I'm on my desktop I wont have to open up my laptop and sync again if I closed it too early. It doesn't even appear when I THINK it is syncing. Thanks for any help in advance. edit 1: Yeah I know the app isn't required or even offered anymore, but what I was wondering was if they had some way to tell if it's syncing or not. The old desktop app had an icon in the notification area which had a animation for when it was syncing, but now there isn't anything there. Although when I try to go in and make it appear it says the application isn't active and the icon will show the next time it is. Its version is 17.0.2015.0811 Is it possible to force the icon to show in the notification area if it isn't designed to show up there at all? I basically just want the same functionality of Skydrive on windows 8.

  Read the article

• Rails 1.0 - Using composed_of gives me a wrong number of arguments (1 for 5) error

  - by Tristan Havelick

  I am developing a Rails 1.0 application (I can't upgrade, it's a strange situation) for which I am trying to use the :composed_of functionality. I have a class called StreetAddress: class StreetAddress attr_reader :address, :address2, :city, :state_id, :zip_code def initialize(address, address2, city, state_id, zip_code) @address = address @address2 = address2 @city = city @state_id = state_id @zip_code = zip_code end end and a model class called Hotel class Hotel < ActiveRecord::Base composed_of :street_address # ... end which has columns: "id", "brand_id", "code", "location_name", "address", "address2", "city", "state_id", "zip_code", "phone_number", "phone_ext", "fax_number", "time_zone", "url", "room_service_email", "manager_name", "manager_email" However when I try to access the aggregation I get an error: >> h = Hotel.find(1) => #<Hotel:0x38ad718 @attributes={"fax_number"=>"1-623-420-0124", "city"=>"Twin Falls", "address2"=>"285", "brand_id"=>"1", "code"=>"XZWUXUSZ", "manager_email"= >"[email protected]", "url"=>"http://www.xycdkzolukfvu.hom", "ph one_number"=>"1-805-706-9995", "zip_code"=>"72436", "phone_ext"=>"48060", "id"=> "1", "manager_name"=>"Igor Mcdowell", "room_service_email"=>"Duis.risus@Donecvit ae.ca", "time_zone"=>"America/Boise", "state_id"=>"15", "address"=>"P.O. Box 457 , 7405 Dignissim Avenue", "location_name"=>"penatibus et magnis"}> >> h.street_address ArgumentError: wrong number of arguments (1 for 5) from (eval):3:in `initialize' from (eval):3:in `new' from (eval):3:in `street_address' from (irb):6 Why?

  Read the article

• I am looking for a tool to measure or detect "unresponsiveness" of a desktop PC

  - by Tom H

  I have a client that provides some server systems to a hospital, and a support ticket was raised that the desktop application was hanging waiting for the server. We did some extensive testing and its pretty clear that the server is responsive, and the network is fine, and that the problem is on the client end. (no requests are received during the hang etc...) We take a look at the desktop machines and they should be fine, so we raise tickets with the software vendor who says that it must be the hardware, the hardware company says that it is the software, etc etc Anyway, so talking to the nurses, they say that these machines often "hang" for 30 seconds at a time, and sometimes during important moments where they need to get data for a patient who is unwell, such as charts and status. So I want to stick a client on these machines that would be able to detect arbitrary "unresponsiveness" of the keyboard/mouse and log that for analysis later. Obviously I am wary to suggest some application that takes resources and makes the problem even worse, so I would interested to see any tools that would detect these (is it correct to say that the keyboard interrupts are being discarded?) scenarios by looking for the OS discarding the interrupts, or whatever is appropriate here. so go on then serverfault, here is your chance to save a life.... ;-) Edit: I am starting to think that some of the tools associated with real time systems might be appropriate, at least as a diagnostic.

  Read the article

• Can we develop very good looking UI in swing and if not what are alternatives

  - by Shekhar

  Hello In my current project we have to develop a good looking desktop based application in java. Currently, we have a very basic desktop application written in swing and team does not have good swing knowledge. Can we create a very good looking UI in swing? Should we use JavaFX for creating the desktop application? What are other alternatives to do this? Thanks Shekhar

  Read the article

• Desktop PC does not power up on power button

  - by hIpPy

  When I press the power button on my desktop, it does not power up completely. Before I press the power button, I see lights on the motherboard. Everything is normal. On power button press, the fans on the cpu, graphics card and motherboard start to spin a little for a second or two and then they stop. No beeps during this process. It has been doing this for a while now but it used to start up after some trials. Once it starts up, I have NO issues at all like random shutdowns so it is not an issue with OS. I'm just guessing here but it seems as if the PSU (Antec TP2-550ATX) is dying out and does not have enough power now - just a guess. It's an old desktop assembled in 2005 but I have maintained it well. Any ideas? Please help. Thanks. Below is the complete configuration. DFI LAN-Party UT NF4 Ultra-D 6/23 {6.70}, Evercool EC-VC-RE 41/47C, AMD Opteron 170 2.0GHz {1.3.2.16} 1.312V 36/41C, ThermalRight SI-120, Panaflo 120×38mm OCZ Platinum 2×1GB 200MHz 2.66V 3-3-2-7 1T XFX 7800GTX 256MB 475/1250MHz {91.31}, Zalman VF900 Cu led 41/56C WD Caviar 320GB 7200RPM 16MB SATA 3Gb/s Antec TP2-550ATX Antec P180 WinXP sp2 KB896256 Logitech MX310 Razer Mantis Speed BenQ FP91G+ 19" LCD 8ms DVI Creative Audigy2 ZS {4.42} BenQ DW1640 Logitech z-5300e 5.1 280W Legend: Driver versions: {} User settings: [] Voltage: V Wattage: W Temperature: C (Celsius) min/max

  Read the article

• How to compose a Matcher[Iterable[A]] from a Matcher[A] with specs testing framework

  - by Garrett Rowe

  If I have a Matcher[A] how do create a Matcher[Iterable[A]] that is satisfied only if each element of the Iterable satisfies the original Matcher. class ExampleSpec extends Specification { def allSatisfy[A](m: => Matcher[A]): Matcher[Iterable[A]] = error("TODO") def notAllSatisfy[A](m: => Matcher[A]): Matcher[Iterable[A]] = allSatisfy(m).not "allSatisfy" should { "Pass if all elements satisfy the expectation" in { List(1, 2, 3, 4) must allSatisfy(beLessThan(5)) } "Fail if any elements do not satisfy the expectation" in { List(1, 2, 3, 5) must notAllSatisfy(beLessThan(5)) } } }

  Read the article

• Using MEF to build a tabbed application dynamically

  - by Mmarquee

  I'm rather taken with MEF and plan to use it to build a demo application to load different tabs. I am a begineer at MEF and WPF and although MEF is loading the assemblies I'm stuck at loading the controls into the TabItem I have created. My code looks a bt like this .. foreach (var page in pages) { TabItem item = new TabItem(); item.Header = page.PageTitle; /// Errm??? // Add each page tcPageControl.Items.Add(item); } The tabs are Pages, so I might be doing it totally wrong, and any help would be appreciated. Thanks in advance

  Read the article

• Small business server 2011 standard - applications randomly closing for remote desktop users

  - by Ash King

  Small business server 2011 standard - applications randomly closing for remote desktop users I have an issue where when you are connected through remote desktop (doesn't matter whether you have administrative rights or not). What happens: Any application that you run (outlook, word, excel, notepad, cmd etc..) the application will randomly crash and produce an error as such: Faulting application name: EXCEL.EXE, version: 14.0.6112.5000, time stamp: 0x4e9b2b30 Faulting module name: ieframe.dll, version: 8.0.7600.16930, time stamp: 0x4eeb0187 Exception code: 0xc0000005 Fault offset: 0x0000000000131e03 Faulting process id: 0x3d4c Faulting application start time: 0x01cecf3491388e43 Faulting application path: C:\Program Files\Microsoft Office\Office14\EXCEL.EXE Faulting module path: C:\Windows\System32\ieframe.dll Report Id: 1c06abd4-3b2b-11e3-bd8d-001999b270e9 I noticed the ieframe.dll, but its not constant for every application that crashes, e.g.: Faulting application name: OUTLOOK.EXE, version: 14.0.6109.5005, time stamp: 0x4e79b6c0 Faulting module name: PSTOREC.DLL_unloaded, version: 0.0.0.0, time stamp: 0x4a5be02a Exception code: 0xc0000005 Fault offset: 0x000007fef39c7158 Faulting process id: 0x43f8 Faulting application start time: 0x01cecf33fe5eec26 Faulting application path: C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE Faulting module path: PSTOREC.DLL Report Id: 0c0f5934-3b2b-11e3-bd8d-001999b270e9 I am unable to perform a sfc /scannow command due to the cmd.exe crashing as well.. I have performed a virus scan on the server which did originally pick up 5 viruses: riskware.tool.ck -> File riskware.tool.ck - > Memory Process trojan.agent.bdavgen -> File trojan.agent -> File HiJack.comsysapp -> Registry Data But after removing these and rebooting the machine we have had no luck Has anyone else ever come across this issue before? Also to elaborate it is happening as frequently as every minute.

  Read the article

• noncopyable static const member class in template class

  - by Dukales

  I have a non-copyable (inherited from boost::noncopyable) class that I use as a custom namespace. Also, I have another class, that uses previous one, as shown here: #include <boost/utility.hpp> #include <cmath> template< typename F > struct custom_namespace : boost::noncopyable { F sqrt_of_half(F const & x) const { using std::sqrt; return sqrt(x / F(2.0L)); } // ... maybe others are not so dummy const/constexpr methods }; template< typename F > class custom_namespace_user { static ::custom_namespace< F > const custom_namespace_; public : F poisson() const { return custom_namespace_.sqrt_of_half(M_PI); } static F square_diagonal(F const & a) { return a * custom_namespace_.sqrt_of_half(1.0L); } }; template< typename F > ::custom_namespace< F > const custom_namespace_user< F >::custom_namespace_(); this code leads to the next error (even without instantiation): error: no 'const custom_namespace custom_namespace_user::custom_namespace_()' member function declared in class 'custom_namespace_user' The next way is not legitimate: template< typename F ::custom_namespace< F const custom_namespace_user< F ::custom_namespace_ = ::custom_namespace< F (); What should I do to declare this two classes (first as noncopyable static const member class of second)? Is this feaseble?

  Read the article

• Best practice to create WPF wrapper application displaying screens on demand.

  - by Robbie

  Context: I'm developing a WPF application which will contain a lot of different "screens". Each screen contains a which on its turn contains all the visual elements. Some elements trigger events (e.g., checkboxes), a screen has individual resources, etc. The main application is "wrapper" around these screens: it contains a menubar, toolbar, statusbar and alike (in a DockPanel) and space to display one screen. Through the menubar, the user can choose which screen he wants to display. Goal: I want to dynamically load & display & (event)handle one screen in the space in the main application. I don't want to copy & paste all the "wrapper" stuff in all the different screens. And As I have many complex screens (around 300 - luckily auto-generated), I don't want to load all of them at the start of the application, but only upon request. Question: What do you recommend as the best way to realize this? What kind of things should I use and investigate: Pages or windows or User Control for the screens? Does this affect the event handling?

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >