Search Results

Search found 2451 results on 99 pages for 'friend'.

Page 75/99 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• pppd disconnects from 3G, doesn't reconnect, w/ persist set

  - by bytenik

  I am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows: hide-password noauth connect "/usr/sbin/chat -v -f /etc/chatscripts/cellular" debug /dev/cell 921600 defaultroute noipdefault user " " persist maxfail 0 lcp-echo-failure 10 lcp-echo-interval 60 holdoff 5 However, when the peer disconnects the connection, pppd often waits a long time (substantially more than my holdoff) to reconnect the modem -- if it ever reconnects at all! An example log showing this: May 23 05:17:24 00270e0a8888 pppd[2408]: rcvd [LCP TermReq id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: LCP terminated by peer May 23 05:17:24 00270e0a8888 pppd[2408]: Connect time 60.1 minutes. May 23 05:17:24 00270e0a8888 pppd[2408]: Sent 0 bytes, received 0 bytes. May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down started (pid 2456) May 23 05:17:24 00270e0a8888 pppd[2408]: sent [LCP TermAck id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down finished (pid 2456), status = 0x0 May 23 05:17:24 00270e0a8888 pppd[2408]: Hangup (SIGHUP) May 23 05:17:24 00270e0a8888 pppd[2408]: Modem hangup May 23 05:17:24 00270e0a8888 pppd[2408]: Connection terminated. May 23 05:17:24 00270e0a8888 pppd[2408]: Terminating on signal 15 May 23 05:17:24 00270e0a8888 pppd[2408]: Exit. May 23 06:08:07 00270e0a8888 pppd[2500]: pppd 2.4.5 started by root, uid 0 May 23 06:08:10 00270e0a8888 pppd[2500]: Script /usr/sbin/chat -v -f /etc/chatscripts/cellular finished (pid 2530), status = 0x0 May 23 06:08:10 00270e0a8888 pppd[2500]: Serial connection established. May 23 06:08:10 00270e0a8888 pppd[2500]: using channel 11 The disconnect at the request of the peer occurs at 5:17, but the reconnect didn't happen until 6:08. I had a friend monitoring the server so I'm not certain that this wasn't a manual reconnection. Either way, it either took almost an hour to reconnect or never reconnected. Shouldn't persist + holdoff 5 cause this to automatically reconnect after 5 seconds of the link terminating?

  Read the article

• Diagnosing PCI issues

  - by dtsazza

  I'm upgrading a PC for a friend, and have run into a problem with upgrading the motherboard. I've been assembling custom PCs for the best part of a decade now, so I'm happy enough with the basics at the very least. The motherboard, CPU and graphics card were all updated at once - after this was done, the machine POSTs but the PCI wireless card, as well as the PCI-E graphics card, do not seem to be recognised at all by the system. No trace of them anywhere in the BIOS, or the POST output, or in Windows. I booted into Linux and ran an lspci which also showed up no sign of them. What is the best step to go about diagnosing this? Is it likely/feasible that the motherboard's PCI bus is just defective and it needs to be RMAed? Are there any other common gotchas that might cause these symptoms? For reference, the components in question are: CPU: Celeron E1400 Motherboard: Gigabyte GA-G31M-ES2L Graphics card: TBC (a low end card from a couple of years ago; worked flawlessly before the mobo change) PCI WNIC: Edimax 7128G Thanks in advance for any help.

  Read the article

• asterisk extensions.conf & sip.conf

  - by Josh

  I'm trying to get my Dialplan to work. When I call, the only thing I get is a dial tone to enter extension "no Background(thanks-calling) is played". When extension 123 is dialed, busy signal is triggered and asterisk CLI get frozen. Any help will be appreciate it. Conf files below. ; PSTN on sip.conf [pstn] type=friend host=dynamic context=pstn username=pstn secret=password nat=yes canreinvite=no dtmfmode=rfc2833 qualify=yes insecure=port,invite disallow=all allow=ulaw ; PSTN on extensions.conf [pstn] exten => s,1,Answer exten => s,2,Wait,2 exten => s,4,DigitTimeout,5 exten => s,5,ResponseTimeout,10 exten => s,6,Background(thanks-calling) exten => 0,1,Goto(incoming,123,1) ; (Member Services) [incoming] exten => 123,1,NoOP(${CALLERID}) ; show the caller ID info in the console exten => 123,n,Ringing() exten => 123,n,Answer() exten => 123,n,Playback(silence/1) exten => 123,n,Playback(connecting1) exten => 123,n,Wait(3) exten => 123,n,Dial(SIP/line1,60) exten => 123,n,Congestion

  Read the article

• sata hard drive failed

  - by M. Shehryar

  Dear friend, initially my dual core PC started shutdown and re-start by itself after adding 1 GB ram and up-grading the graphic card. Then refused to boot. I restored the window ghost but failed to boot. I tried to install new window but installation failed after coping the window files. tried to install old vista lonhorn. It inspected found errors, fixed them but ultimatly failed to be installed. Once again restored the ghost through acronis but failed to boot. At the end attached as slave with another pc but it was not visible. Even acronis could not see it or its partitions. Only bios can see it. It seems that no file system is available on the drive. My data on drive is very important. Please help me how to revover my data. Drive brand is Samsung, cap is 160 GB and file system was NTFS.

  Read the article

• Multiple static WAN IP addresses to single LAN subnet

  - by Jessy Houle

  Below is my home network topology. I currently have 5 static IP addresses, 3 of which are in use by 3 routers. These routers in-turn subnet internal networks and port forward. I use my SSL VPN appliance to remote home from work or on the road. At this point I can remotely administer my Windows Server. I know the network is setup wrong, I was matching existing hardware the best I knew how. http://storage.jessyhoule.com.s3.amazonaws.com/network_topology.jpg Ok this said, here is the problem... One of my websites on my Windows Server now needs to be secure (SSL using port 443). However, I'm already port forwarding port 443 to my VPN appliance. Furthermore, if I'm going to have to reconfigure the network, I would really like to be able to use the SSL VPN to remotely administer all machines. I mentioned this to a friend of mine, who said that what I was looking for was a firewall. Explaining that a firewall would take in multiple static (WAN) IP addresses, and still allow all internal devices to be on the same network. So, basically, I could supply my SSL VPN appliance it's very own static (WAN) IP address routing, and yet have it on the same internal network (192.168.1.x) as all my other devices. The first question is... Does this sound right? Secondly, would you suggest anything different? And, finally, what is the cheapest way to do this? I am started down the road of downloading/installing untangle and smoothwall to see if they will do the job, hoping they take multiple static (WAN) IP addresses. Thank you in advance for your answers. -Jessy Houle

  Read the article

• sata hard drive failed

  - by M. Shehryar

  Dear friend, initially my dual core PC started shutdown and re-start by itself after adding 1 GB ram and up-grading the graphic card. Then refused to boot. I restored the window ghost but failed to boot. I tried to install new window but installation failed after coping the window files. tried to install old vista lonhorn. It inspected found errors, fixed them but ultimatly failed to be installed. Once again restored the ghost through acronis but failed to boot. At the end attached as slave with another pc but it was not visible. Even acronis could not see it or its partitions. Only bios can see it. It seems that no file system is available on the drive. My data on drive is very important. Please help me how to revover my data. Drive brand is Samsung, cap is 160 GB and file system was NTFS.

  Read the article

• Missing BootMgr in Vista

  - by Selase

  Am in really deep trouble here and would use every advice available from everyone out there.. Am message just pooped on my screen and i had to restart my laptop. upon restarting the BootMgr got corrupted. Am running Windows Vista 32 bit by the way.. i got onto Google with a friend's PC and found two basic ways of fixing it. the first one that requires windows to automatically fix it using Startup repair ends up with the error message : "Startup REpair cannot repair this computer automatically" the second option that requires me to rebuild the BCD scans my system and finds the operating system on drive D:\Windows which i believe should be C:. if i hit Y(yes) for the rebuild process to take place i get the message "The required system device cannot be found" i then try the second option which requires me to recreate the BCD Store ends up with an error message that says "The store export operation has failed. The requested system device cannot be found". proceeding from there is meaningless since the system device cannot be found. I somehow believe the device cannot be found because its identifying the windows installation on D: instead of C: but how to change that i have no idea... I dot know how it happens to identify an O/S on D: when there's none there... How do i go about fixing the BootMgr? I have very important files on my system and cant afford to reinstall windows... i really need to fix this..Please help...

  Read the article

• Why can't I renew my dynamic IP address?

  - by qwerty

  So, I'm going to explain this from the start. I've started a project with a friend of mine which includes a webspider, that crawls through all pages on a site and stores them in a DB. Since I've never done this before, I didn't think about the amount of requests I was actually sending to the site, and after a day or two I finally got my IP blocked. I need to be able to visit that site as it's very important to me. Not only for my project, but for other reasons too. (and if I'm able to renew my IP I'm going to set a delay on the crawler so I don't get blocked & DDOS the site) I have a dynamic IP address, at least that's what my router settings say. I've tried ipconfig /flushdns, ipconfig /release, restart computer. No result. I end up with the same IP address. I've also tried renewing it from the router, however, I think it uses the same method which isn't working. Is it possible that site has blocked my mac address? Can a site even access my mac address?

  Read the article

• PHP script not automatically updating when moved to another server

  - by user32007

  A friend built a ranking system on his site and I am trying to host in on mine via WordPress and Go Daddy. It updates for him but when I load it to my site, it works for 6 hours, but as soon as the reload is supposed to occur, it errors and I get a 500 timeout error. His page is at: jeremynoeljohnson .com/yakezieclub My page is currently at http://sweatingthebigstuff.com/yakezieclub but when you ?reload=1 it will give the error. Any idea why this might be happening? Any settings that I might need to change? Here is the top of the index.php file. I'm not sure which part of any of it is messing up. I literally uploaded the same code as him. Here's the reload part: $cachefile = "rankings.html"; $daycachefile = "rankings_history.xml"; $cachetime = (60 * 60) * 6; // every 6 hours, the cache refreshes $daycachetime = (60 * 60) * 24; // every 24 hours, the history will be written to // - or whenever the page is requested after 24 hours has passed $writenewdata = false; if (!empty($_GET['reload'])) { if ($_GET['reload']== 1) { $cachetime = 1; } } if (!empty($_GET['reloadhistory'])) { if ($_GET['reloadhistory'] == 1) { $daycachetime = 1; $cachetime = 1; } } if (file_exists($daycachefile) && (time() - $daycachetime < filemtime($daycachefile))) { // Do nothing } else { $writenewdata = true; $cachetime = 1; } // Serve from the cache if it is younger than $cachetime if (file_exists($cachefile) && (time() - $cachetime < filemtime($cachefile))) { include($cachefile); echo "<!-- Cached ".date('jS F Y H:i', filemtime($cachefile))." -->"; exit; } ob_start(); // start the output buffer ?>

  Read the article

• Router block some sites

  - by Mahesha999

  Hi I was using ADSL Modem/Router earlier. The device is quite old Pronet PN-ADSL 101 E/U model (pics: http://bit.ly/P2YaWy, http://bit.ly/OA700l) Since it had only one RJ45 out, I bought new Wireless Router TPLink TL-WR941ND. It has 4 RJ45 out and 3 wireless antennas. I configured my old router in bridge. Now, if I have to connect my pc to Internet through the old router, I have to enter username and password. Then I connected the RJ45 output of old router to the WAN in of new router. and ran the CD of new router. It configured the new router in PPPoE by saving the username and password in router to dial automatically. So now I have to just plug in the wires in my new routers any RJ45 out. I am able to access the Internet when I connect through new router (both wired and wirelessly), but some sites are getting blocked. Most notably yahoo.com (though ymail.com is working), Microsoft.com. msn.com. These sites work perfectly fine when I connect my pc directly to my old router and enter username and password manually. (However others like google.com. facebook.com works fine when connect through new router) So here these some sites need some parameter set but I am unable to find them out. Can anyone help me. My friend said he also faced same problem. Surprisingly he advised me to see if the same websites will work through Opera turbo mode and boom they worked. So what could be the problem?

  Read the article

• Can't get intel atom g-500 video driver to work with ubuntu 10.10 netbook edition.

  - by Matthew

  First of all I am completely new to Linux, so if you respond, please do so in a 'linux for dummies' tone so that my brain will be able to process it. I recently installed ubuntu on my dell mini-inspiron 1010. It has one GB of ram and an intel atom processor that uses the intel 500 graphic accelerator driver for windows and can run 1024x768 comfortably in xp. When I was installing ubuntu had quite a bit of trouble with my display and I am still unable to adjust my settings from 800x600x0x0 and there is no hardware acceleration. I visited the intel site and installed the linux drivers with the help of a friend but still no change. I tried adding resolution settings through xconf but they could not be applied even after I added the values. I am probably going about this totally wrong, but I've spent quite a lot of time browsing through forums and still haven't found a solution. Any help would be greatly appreciated. Also any other beginner tips that you have would be much appreciated. Thanks in advance, Matt

  Read the article

• What's the best way to completely remove everything from a computer, without re-installing?

  - by Connor W

  I have a friend who wants to sell their computer, but obviously all personal information and software that it is on it needs to be removed before doing so. Usually I would format and reinstall it, but I cannot easily get hold of the required XP DVDs and I'm not 100% sure the serial number is stuck on the case as usual so getting hold of it will probably require more effort than I'm prepared to spend. So, what's the best and quickest way to remove and uninstall everything from the PC without reinstalling it? Thanks. EDITS: I'm looking to remove things like Internet History and all installed programs, too. I know how to remove the history and each individual program, but that could take hours. The machine is not branded and therefore there is no website I can go to download recovery software. There is no recovery partition on the computer and I'm not aware of any recovery DVDs for it either. I can only assume it was installed from a retail copy, and therefore there is no way to recover it to factory settings. It needs to have XP installed, not any distribution of Linux. Like most average people, the person getting the computer will not understand what to do with a computer that doesn't have Windows installed, and software like Office does not work on Linux either. Buying another licence is not really an option either. She has just brought a laptop to replace the computer, so buying another licence for a computer that she's getting rid of doesn't really make sense. Thanks for all the help so far!

  Read the article

• Someone used or hacked my computer to commit a crime? what defense do I have?

  - by srguws

  Hello, I need IMMEDIATE Help on a computer crime that I was arrested for. It may involve my computer, my ip, and my ex-girlfriend being the true criminal. The police do not tell you much they are very vague. I was charged though! So my questions are: -If someone did use my computer at my house and business and post a rude craigslist ad about a friend of my girlfriend at the time from a fake email address, how can I be the ONLY one as a suspect. Also how can I be charged. I noticed the last few days there are many ways to use other peoples computers, connections, etc. Here are a few things I found: You can steal or illegally use an ip addresss or mac address. Dynamic Ip is less secure and more vulnerable than static. People can sidejack and spoof your Mac, Ip, etc. There is another thing called arp spoofing. I am sure this is more things, but how can I prove that this happened to me or didnt happen to me. -The police contacted Craigslist, the victim, aol, and the two isp companies. They say they traced the IP's to my business and my home. My ex was who I lived with and had a business with has access to the computers and the keys to bothe buildings. My brother also lives and works with me. My business has many teenagers who use the computer and wifi. My brother is a college kid and also has friends over the house and they use the computer freely. So how can they say it was me because of an angry ex girlfriend.

  Read the article

• Issues using gmail with google apps and external domain

  - by Jonathan Kelly

  I have recently tried to use gmail through google apps as my main email client, but I'm experiencing a few different problems. I am managing the domain (conjunktiondesign.co.uk) through 123reg.co.uk but it is hosted through fasthosts.co.uk. I transfered the domain to 123reg as fasthosts did not allow me to change the MX records myself. I followed the setup instructions step by step on google apps and changed the MX records as they told me to. My email was now working perfectly but my website was down and I was getting the following error: The dnsserver returned: No DNS records I have a friend that is using the same system as me (ie. Externally hosted domain and google apps mail) and I changed my 123reg details to the same that he had (as his was working perfectly - both email and website). I changed my name servers to point to fasthosts, rather than 123reg and I added an A record called '@' pointing to fasthosts IP address. I also created another A record called 'www' pointing to fasthosts IP address. After I did this, my website worked almost immediately but I have only realised that since changing it my email is now down. I have not received anything since Saturday. I am a web designer and would consider myself fairly tech savvy, but I have no idea about A records, CNAME's and all the things I have been messing about with! What I ultimately need is someone to help me get my email and website working at the same time, rather than one being down when the other is OK. I seem only able to get one or the other working. I have now changed the name servers back to 123reg in an attempt to get my email back as it is more important than my website at this stage. Any help is much appreciated. Thanks.

  Read the article

• Did chkdsk make it harder to restore files?

  - by neyl

  My friend asked me to try and fix his loaded Sansa Clip + which wasn't playing. After opening it in MSC mode I discovered that the Music directory was empty and total of all files was only a few MB. However Disk properties showed me that it was 7Gb full. I then ran Tools - Error Checking and Windows dutifully informed me that disk was corrupt and I should run again Allowing Windows to Fix Errors. I did that and it told me everything was fixed and that all files were placed in FOUND.000 Dir. FOUND.000 was about 7.5 GB with FILE0000-1546 . CHK. (I am aware of methods like ChkBack to scan and convert to mp3 etc BUT Original filenames and structure needed!) Now I started getting worried that I made things worse! I have plenty of experience with Data Recovery Programs - Recuva, Restore My Files etc. and I was anyhow planning to use them to scan the drive. But NOW after CHKDSK "fixed" the drive maybe it modified critical FAT information vital for data recovery. So I run these programs and 0!!!. No trace of files! I tried a ton of Recovery Programs with same results TILL EaseUS Data Recovery Wizard found all files and I purchased program for $55! My Question In your opinion - did running CHKDSK with automatic fixing of errors make matters worse (i.e. many data recovery progs. didn't find a trace and they would have done if not for chkdsk) or was the filesystem too corrupt anyhow for regular File Recovery Progs.? If I would be a Professional - would I be responsible for running CHKDSK - automatic Fixing. Do you know of a better Data Recovery Program than EaseUs Data Recovery wizard - According to my experience I haven't found better!? Thanks

  Read the article

• Extract and view Outlook contacts attachment sent to Gmail

  - by matt wilkie

  A friend forwarded a contact list to my gmail account from Outlook (2007 or 2010, not sure which). I can see there is an attachment in gmail but when I save it to my local drive it's just a plain text file containing the text This attachment is a MAPI 1.0 embedded message and is not supported by this mail system. If I use gmail's "show original message" it contains in part: This is a multipart message in MIME format. ------=_NextPart_000_0016_01CC6656.CE12F030 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit ------=_NextPart_000_0016_01CC6656.CE12F030 Content-Type: application/ms-tnef; name="winmail.dat" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="winmail.dat" eJ8+Ih0VAQaQCAAEAAAAAAABAAEAAQeQBgAIAAAA5AQAAAAAAADoAAEIgAcAGAAAAElQTS5NaWNy b3NvZnQgTWFpbC5Ob3RlADEIAQgABQAEAAAAAAAAAAAAAQkABAACAAAAAAAAAAEDkAYASAgAACgA --8<---snip---8<-- GUC/9NKH95rABgMA/g8HAAAAAwANNP0/pQ4DAA80/T+lDvAm ------=_NextPart_000_0016_01CC6656.CE12F030-- How do I save the attached winmail.dat properly, and open the winmail.dat and extract the contact list? I'm running Windows 7 x64, but have access to an ubuntu linux vmware appliance if needed. I have Outlook 2010, but can't use it to connect directly to gmail as pop3 and imap are blocked by the corporate firewall.

  Read the article

• Is it possible for a faulty processor to cause audio static/noise?

  - by Tom

  I have a Core 2 Extreme processor I received from a friend and have set up an XBMC box using it. However, I constantly get audio static whenever playing any music or videos. Here is a video of the sound: http://www.youtube.com/watch?v=SqKQkxYRVA4 I have tried replacing everything short of the case and the processor, including cables, audio interfaces, operating systems, ram, etc, leading me to think it might be either the case shorting out the motherboards I have tried or a faulty processor. Is it possible for a faulty processor to cause audio static/noise? Any feedback would be appreciated. Edit - Here's a list of things I have tried: Reinstalling OS Installing/upgrading/repairing PulseAudio/Alsa Installing alternate OSes, straight Ubuntu, Lubuntu, Xubuntu, Arch, Mint, Windows 7 Switching audio from the external card to internal Optical, audio out through HDMI, audio out through headphones Different ports on receiver (my main desktop sounds fine on the same sound system) Different optical cables Unplugging everything unnecessary from the motherboard (1 HD, 1 Stick of Ram, 1 Keyboard) Swapping out ram Swapping out the motherboard Replacing the Graphics Card (was replaced due to fan being noisy, not specifically for this problem) Different harddrives Swapping power supply Disabling onboard audio Switching Power Cable Plugging in through surge protector Plugging into different outlet on separate circuit

  Read the article

• SQL Server architecture - they want to move my database to new instance...Why?

  - by O'MALLEY

  Our current production database environment contains about 10 similarily managed databases. Our agency has just purchased and is installing new blade chasses and wants to move my database to a new instance (leaving the other 9 on another). This decision is being driven by one of our IT staff, not a DBA. I am a project manager, not a DBA but I know enough to not necesarrily have a good feeling about this decision and I am urging our IT department to make a sound decision based on what is best for the database. Our IT department has stated that it is not good to have all our eggs in one basket, and has also stated that my database contains "regulatory data" so it should be on its own instance. A couple of truths: - None of the databases on the current instance are OLTP databases nor are any of them data warehouses - My database currently has joins/views to a couple of the other databases in the production environment So my questions are as follows: Am I wrong to disregard a statement about eggs in baskets? (hello, this is why we have maintenance plans/disaster recovery plans). I'll mention that other databases also have regulatory data too. What types of questions do I need to ask to determine if this is a sound decicion? (A DBA friend mentioned that if the service level agreement of said database does not radically differ from the others then why do they want to do this?) I have done some research on linked servers. What arguments should I bring forth about the fact that I have views setup that rely on data from other DBs currently?

  Read the article

• COMPAQ Tower No Signal to monitor

  - by Lancelot

  I received a Compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. My plan was to turn this into an Ubuntu Server. It booted up with no problems even with the Ubuntu live disc. After a normal shutdown (not unplugging the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks might be faulty, etc. Thus, I checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower was able to boot into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which I know work perfectly but not with this tower (I recall that it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since I am not using an external Video Card, this is onboard VGA.

  Read the article

• Is a Hyperthreaded CPU more powerful and more efficient than a Dual-core CPU? [closed]

  - by user1811864

  which computer to choose with Pentium processor hello they are getting rid of the old computer equipment in the office and i have to choose the computer to take home i get first choice to pick. -15 inch lcd screen 4 gb of ram core 2 duo dual Core E8400 3.00 GHz dvd writer windows vista/ linux -15 inch crt monitor with 2 gb ram and pentium 4 2 ghz single core HT technology windows xp hardisks both 250 GB my friend is telling me to choose the second one Pentium single core HT because he told me it runs faster becuase of HT technology and cooler and consumes less current electricity so it wont get overheated because it has HT technology so it's high definition for encoding and watching HD movies and HD sound and is like a gaming pc to play internet games. And also he said the dual core 8400 runs at 3 ghz compared to the 2 ghz so it heats very much because of the two extra cores so it takes more current raising electricty bills and is not good for gaming and watching HD movies and internet flash animations and games because of getting heated everytime. And he wants to choose and take the E8400 because he has air conditioning at home so it will be safe from heating. So which one computer should i take is it really faster because of the HT High definition technology and will i be able to play internet flash card games better and watch good HD movies Youtube etc and play all the music and songs.

  Read the article

• Are there compact external USB audio interfaces which are better than a on-board sound?

  - by rumtscho

  I am asking this for a friend. He loves his voice recognition software and dictates a lot of text using a headset. Now he has a new laptop, which only has a combined mic/headphones output, and wanted to buy an adapter. I told him to get an external USB sound interface instead, as the better sound quality will probably increase the hit rate of the voice recognition. He agreed, but when he saw a picture of the SoundBlaster X-Fi, he said that it is way too big, because he wants to carry the thing everywhere. He'd rather have one of these small things which are the size of a flash memory stick, with only one mic and one phones output, period. Now I am not sure whether these mini interfaces would produce a sound better than onboard sound. They all seem to come not from established audio interface manufacturers, but from electronic accessories manufacturers like Speedlink, or just noname brands. Is there a compact audio interface with good A/D quality (it is OK if the price is comparable to that of the bigger interfaces, even if there is no additional functionality like Chinch in-/output etc)?. And if there isn't, will the noname soundcardsticks offer any advantage over a simple adaptor for the onboard sound?

  Read the article

• Nginx rewrite for link shortener + Wordpress pretty URLs

  - by detusueno

  Okay so I installed Nginx/PHP/MySQL/Wordpress via a online walk through, and it had me enter these rewrites to enable Wordpress pretty URLs: if (-f $request_filename) { break; } if (-d $request_filename) { break; } rewrite ^(.+)$ /index.php?q=$1 last; error_page 404 = //index.php?q=$uri; This is then included in the vhost for my domain. What I'm trying to do now is add some redirection/link shortner rewrites that will play nice with the setup I have in mind. I'd like to redirect "x.com/y" to "x.com/script.php?id=y" for all external links that I post. The Wordpress link setup right now has almost all internal links begin with "news" (x.com/news/post-blah, x.com/news/category/1, etc) BUT I also have a few root links that point to some internal content (x.com/news, x.com/start). I'm guessing that's going to cause some conflicts. What's the best approach to do this? I've never worked with Nginx (or any rewrite rules) but maybe I can distinguish between "x.com/news" and "x.com/news/" to allow it to play nice? I had a friend setup a working version of this in Apache and it'd be nice if I could get this up on Nginx again.

  Read the article

• CPU temperatures high on new build after gaming

  - by Reznor

  My friend had a problem with his computer a while back. His games were crashing, even within the menus. He was stumped as to what the problem was, so I posted on here requesting help. He found out the day later, when his computer would start up but wouldn't display anything on the screen. His video card must have came screwed up. So, he got a replacement. Now, there's a new problem. His temperatures, which were acceptable before, are now insanely high. His GPU temperature runs 70-80c, which is understandable considering he's running his games maxed out, but the real problem here is his processor and motherboard temperatures. All four of his cores are running at 88-90c after coming out of a game. His motherboard temperature was also 70c at one point. In terms of cooling, his case should definitely be adequate. He has an Antec Twelve Hundred. He's using stock fans. The cable management in his case is very good; better than average. He's using the stock heatsink with the processor too, but note, it was fine before the replacement, so it isn't like there's some inherent problem. He has checked the case too. Everything's fine! No cables in the way. The heatsink is seated properly. He turned his case fans up to high, as well, but the temperatures are persisting. Could the processor be overheating due to running games maxed out? Any ideas?

  Read the article

• Vlan on DD-WRT v24 filesharing without internet

  - by user148888

  I'm planning to do a vlan with shared files without internet. my vlan is working correctly until I could lock the internet but I can not share files only I can ping from 172.168.1.x to 172.168.2.x but not backward. can u help me please?? This is my config. WRT54g DD-wrt v24 vlan0 eth 1,2,3 172.168.1.1/24 vlan1 Wan vlan2 eth 4 172.168.2.1/24(don't want internet here just Lan Conection) Pc (my pc) 172.168.1.10/24 gtway 172.168.1.1 (with internet) Ubiquity Nanostation loco M2 172.168.2.20/24(AP)(connect to eth 4 vlan2)(don't want internet here) Ubiquity Nanostation loco M2 172.168.2.21/24(Client)(don't want internet here) Friend pc 172.168.2.115/24(connected from the client)(don't want internet here) Any Help Please.. ![Lan Map][1] ![Vlan Config1][2] ![Vlan Config2][3] ![Vlan Config3][4] ![Command to block internet][5] [url=http://imageshack.us/photo/my-images/194/lanxl.jpg/][img=http://imageshack.us/a/img194/4197/lanxl.th.jpg][/url] [url=http://imageshack.us/photo/my-images/600/commandmf.jpg/][img=http://imageshack.us/a/img600/9530/commandmf.th.jpg][/url] [url=http://imageshack.us/photo/my-images/811/57398524.jpg/][img=http://imageshack.us/a/img811/1917/57398524.th.jpg][/url] [url=http://imageshack.us/photo/my-images/717/48064277.jpg/][img=http://imageshack.us/a/img717/829/48064277.th.jpg][/url] [url=http://imageshack.us/photo/my-images/685/21456517.jpg/][img=http://imageshack.us/a/img685/256/21456517.th.jpg][/url]

  Read the article

• Games, Windows 8.1 and 144Hz display

  - by Marioysikax

  So I have been having problems with few games after switching from 7 to 8.1, which seems to be related to my 144Hz monitor. Few examples: Shank, Shank 2, Blood of the Werewolf, Astebreed, the Sims 2 and Rayman Legends patch 1.2Had few other as well but it's been long and I have 600+ steam library. From those games at least the Sims 2 and Shank worked without any problems with same setup and Windows 7. So basically these games simply refuse to launch with basic setup. However if I plug 60Hz TV with HDMI instead everything magically starts to work. As for Astebreed and the Sims 2 using windowed mode seems to also work. As for Rayman Demo and version 1.0 works for some reason and 1.2 breaks settings menu. I have already tried contacting supports. EA support stated game simply shouldn't work with 8.1 at all (which is lie as it works with that TV and friend with 8 plays just fine), ubisoft support took few weeks and support said he will forward info for further processing, blood of the werewolf support had no idea what's going on and told me to just use my TV instead.Changing monitors refresh rate to 120Hz or forcing it to 60Hz doesn't do anything. I have DVI right now but I will try with DisplayPort when I get the cable. At PCGW Garrett said it may have something to do how listing resolutions work with 8 compared to earlier Windows versions but my googling skills don't bring anything up and compatibility mode for earlier windows version doesn't work either (not that I expected that to work). My system specs are on my steam profile. How do I get those work with my 144Hz monitor as well as possible future games having same problem? Downgrading to 7 would work but is far from practical and I don't own legit lisence for that one.

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >