Search Results

Search found 38783 results on 1552 pages for 'graphical screen issue'.

Page 75/1552 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• Increasing Screen Resolution to more than limit and scaling to origional

  - by Akshat Mittal

  I have a laptop, with Screen Resolution - 1366x768 (most common) - I want to increase it further to 1600x900 (or higher), in the same ratio. I want to scale the higher resolution on my current screen to fit it. I found xrandr with command xrandr --output LVDS1 --scale 1.4x1.4, this worked but again resulted to another problem, it does the scaling thing but the cursor is still blocked into the native screen resolution and I am not able to move it further, I found that the bug is already filed here. Also this command was only for Linux, I wanted to do this thing with both Linux and Windows (including Windows 8). I want a similar software that is bug free (at least not a major bug like this) and that supports Windows as well (or two separate software for Windows and Linux). Any help is appreciated and Thanks in advance.

  Read the article

• Issue with Toshiba Satellite C50 A-1JM

  - by Nathan Hawkes

  I am having some odd problems with my Toshiba laptop. For the last two days, it has not loaded past the boot screen for hours, if at all. When I force the laptop off and switch it back on, it goes to the Preparing Automatic Repair process but will not complete the process and go to the desktop. However, this only happens when the battery is plugged in. When I remove the battery and run the laptop on power, it works without issue. Would this be a battery issue (given it works without the battery) or a hard drive issue (given it won't get past the boot screen)? If neither, what would you suggest as a solution?

  Read the article

• Cannot increase my screen resolution

  - by Patrick Beardmore

  I am trying to install my new monitor but my Graphics Adapter (Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family) does not offer a resolution of 1920x1080 in the [Display Properties Settings] window. It only offers up to 1360x768. Can anyone explain to me how I can increase this number to the correct resolution. The monitor does show my the windows desktop, albeit at a lower resolution which is being stretched to fill the screen, making it look very blurry. I have installed the "Monitor Drivers" I found on the disk supplied with new monitor, but these do not appear to have made any difference. The Intel software that comes with the graphics card has an information window containing lots of info about the card and the monitor itself. I have placed this on a webpage so you can examine it if helpful. Many thanks with your help in getting my Christmas present to work! Patrick P.S.: Before I got this screen I checked to see if my graphics card could cope with such a large screen.

  Read the article

• Full screen not available in vmplayer 6 (on Linux)

  - by Simon

  I recently updated vmware player from 5.0.2 to 6.0.0, and now the "full screen" menu item is always grayed out. It happens with all my VMs, regardless of the guest OS. "Enter Unity" is still available for some reason. When I edit a VM to start up in full screen it works, but once I leave full screen I can't go back, which is really annoying. I've no clue where to start looking for the cause. I'm seeing this on Ubuntu 13.04 and OpenSUSE 12.3.

  Read the article

• Issue with emails with attached emails.

  - by Jake

  There is this problem with our email in my organisation that happens to some people. When a remote sender sends an email that has an attached email, the reciever gets the email but the attached email is blank. The recieving mail server is MDaemon Pro. I also notice that the email header could be corrupted. I checked the MDaemon KB and find nothing regarding this issue. but I also highly doubt that this is an MS Outlook 2007 issue. Anyone have any ideas? Putting this issue aside, I feel that we really should not attach emails to emails. There is a reason for the "Forward" button. I can't understand why is it so difficult for them to just forward that email instead of drag and drop one into the other using outlook. Furthermore, if the attached email also has its own attachments, the resulting nesting will be quite unbearable. Don't you think so?

  Read the article

• Ubuntu 12.04 blank screen after login

  - by kgthenerd

  I just installed Ubuntu 12.04 LTS 64 bit on a machine, everything went well accordingly but after login it just gives me a blank screen. During startup after BIOS message it shows "Out of range" error and comes to login window after logon it's just a blank screen. even after somehow it comes to an empty desktop screen i dont see the Unity bar or anything like that (Can change wallpaper, and system setting though). And can't goto Console mode by pressing Ctrl+Alt+F1 - it returns "Out of range" error. System is new AMD Sempron with 2 Gigs of RAM has NVIDIA GeForce 6150SE-based graphic chipset. any ideas on this?

  Read the article

• Laptop screen turns off on removing power cord

  - by YatharthROCK

  After a recent upgrade to Windows 8.1 Pro from W8, my laptop's screen turns off as soon as you remove the power cord. It turns back on with no issues when you plug the power back in. Keyboard and mouse input is processed while the screen is off. My settings tell the screen to go off after 2 minutes of inactivity on battery. I was having a battery issue from before where my laptop would should down after 5 minutes of running on battery (despite showing 60% left), but I think that's unrelated. Any other info will be provided on request. Can anyone help me figure out what's going on? How can I stop this behaviour?

  Read the article

• Dark Windows 7 Screen

  - by user147521

  My Gateway laptop -Windows 7- screen became too dark a few days ago after I finished installing Windows automatic update. I can see nothing unless I use a flashlight. Windows login screen is the only bright screen for few seconds. What should I do to resolve this issue? I checked power-saving/ Power Options settings and rebooting in Safe Mode. I tried to lower the refresh rate but it did not allow me. The laptop adapter type is ATI Radeon Xpress series. I uninstalled and reinstalled the driver. And the driver is up to-date. Any help would be appreciated.

  Read the article

• Webpage / Other application does not fit fully on screen

  - by Frank Levebre

  I have an ASUS Eee PC 1008 HA The problem is that I have to move the cursor up/down in order to see the start control / icons at the bottom of the screen and the cursor up in order to see the menu bar / etc at the top of the screen, ie the whole page does not fit on the screen anymore. It has nothing to do with the zoom % in the bottom right hand corner. This also is the case whatever application I am running, ie Internet explorer , word, excel or whatever. Does anybody have an idea what is the problem and how I can resolve this?

  Read the article

• Virtual Box - not filling entire screen

  - by jdavis

  I am new to VirtualBox and am trying to set up an instance of Windows 7 64. I have the virtual machine instance running with Windows 7 now installed, but it only fills up a small portion of my screen. Even when I go full screen, the window stays the same size and the rest of the screen is filled with gray space. I have installed VirtualBox Guest Additions, which allowed me to go from a resolution of 800x600 to 1024x768, but this still isn't satisfactory as my laptop display is 1600x900. Any help on this would be most appreciated. Thanks.

  Read the article

• Devices menu - project to second screen with only one monitor

  - by Jacob Palmer

  So I made a huge blunder. In the devices menu on Windows 8, I selected to project to a second screen only on accident. I had two monitors connected but only the primary one was actually displaying anything. So I projected it and now I can't access anything. The primary screen will show the windows icon when it loads, but then it disappears and I can't login or anything. Surely there's a way to get it back on the primary screen? Thanks a bunch. I'm really lost..

  Read the article

• MS Clear Screen Saver doesn't work

  - by ufoq

  I have a problem with really exotic thing - Microsoft Clear Screen Saver. As it's name suggests, it's a screen saver, that's transparent (MS posted it as a part of W2k Resource Kit). When you move the mouse/hit a key, the "lock" dialog appears. I would like to use this to view servers desktops without need to log in. I tested it on my XP's, and it works flawlessy. But on W2K3 servers it doesn't work. After the screensaver timeout, the error message is displayed: "The Clear Screen Saver cannot display the user desktop after the workstation has been locked"

  Read the article

• Can't unlock locked screen, in Ubuntu 12

  - by Camille Goudeseune

  After locking the screen (with a keystroke bound to xlock -nice 8 -mode blank), I can unlock the screen as expected, but only within a few minutes. After being locked overnight, when I hit a key (even Ctrl+Alt combos), the screen stays black with just a brief white flash across the middle of both monitors. The workaround is to ssh in from another host and restart X. Some months ago, this happened every few weeks. By now it happens almost every morning. How do I even start to diagnose this? What might I look for in log files? (The intermittency is particularly troubling.) Failing that, is there an alternative to xlock aka xlockmore? Hardware: 3-year-old HP minitower, GEForce 9800 GT, two Asus LCD monitors. Software: Ubuntu 12.04.2 LTS. Window manager awesome-wm. NVidia driver 304.88. XLock version xlockmore-5.31.

  Read the article

• Visual Studio 2012 window border leaks onto other screen

  - by chrisstuart

  I have several 30" monitors and as a result, I use the Win+Left/Right to tile windows to the left and right side of each screen. I've noticed an annoying feature of Visual Studio 2012 is that it seems to "leak" onto the next screen. I can see a line on the adjacent screen as if the edge of the window is slightly over the border. Anyone else see this? Is it a bug? This is on Windows 7 64 bit. I've never seen this with any other application.

  Read the article

• Multiple Windows Desktop areas for Full-Screen applications

  - by arootbeer

  Is it possible to run multiple instances of Windows Explorer within a single user session, or configure multiple desktops that are portions of a screen? I don't know the best way to describe what I want to achieve, but here's a picture of what I've got: I've got a 4 monitor setup, 3 portrait and one landscape, and I am normally running a number of RDP sessions, outlook, chrome, a development environment or two, so on and so forth. Most of these applications support full-screen views which mostly or completely hide the window borders, but on the Windows Desktop they take up a full monitor to do so. What I want to do is have 7 "desktops", "regions", call them what you will, each of which is, for the purposes of applications running in it, a "full screen" environment: I'm not tied to Windows Explorer for this, in case it helps - a different window manager that will support this functionality would be a perfectly acceptable answer.

  Read the article

• Customising Windows 8 Start Screen Tiles

  - by Joe Taylor

  We are looking for an effective way to manage the start screen in Windows 8. So far using WSIM we can add certain start tiles by using the OOBE System - shell setup - SquareTiles and WideTiles properties. However this only seems to work for square tiles and not wide tiles, if anyone has any insight on this it would eb appreciated. However the main question is has anyone managed to modify this screen using a GPO, we can add application shortcuts to the Start menu list on the All Apps page using a create shortcut to all users start menu policy. However as we occasionally deploy apps throughout the year in line with the courses requirements we would want to be able to put a shortcut on the home screen. Is it possible?

  Read the article

• Viewsonic monitor keeps showing its on-screen menu incessantly

  - by markvgti

  Since yesterday my Viewsonic 22" monitor (VX2255wmb) keeps showing its on-screen menu incessantly, without my touching any of its buttons. The menu comes on in the centre of the screen, stays on for 8-10 seconds, disappears for a second or two, then repeats the cycle. This happens whenever there's a signal being sent to the monitor. I can't actually navigate the menu when it appears on-screen. Pressing the power button, or the Up and Down buttons on its right edge dismiss the menu, only for it to reappear again. These symptoms have appeared before, but earlier they'd stop after 5-10 mins. The power button on the monitor has always been iffy, but now it doesn't seem to be working at all--have to switch off power supply from mains when I leave my desk. Using DVI input on this monitor as my HP desktop has DVI output.

  Read the article

• SQL 2008 R2 Mirroring Issue

  - by CWL

  Windows 2008 R2 with SQL 2008 R2 - Using Mirroring of a Database across the WAN in a HA setup with one witness. One issue I am having is during a failure (ever so often) the system fails over or tries, but leaves both databases in a Restoring State. My guess is the failover issue happens when there is a WAN bouncing and the systems get confused. The usual fix is to reboot the sql servers. Has anyone seen this type of failure? While this does not happen often it does causes an issue and concern with HA not being trusted fully.

  Read the article

• Disable RDC Welcome Screen in Windows 2008 R2

  - by mikebridge

  Is there a way to disable or bypass the "Welcome" screen I see when I'm using RDC to log in to a machine using saved credentials? I have startup task which launches an RDP session automatically to localhost when the machine boots. This works, except that the remote desktop window stops and waits for an "OK" on the Welcome screen: MACHINENAME-A.B.C.D(Server ID:Console 0) Welcome [OK] This screen is preventing me from automating this login. Is there any way to get around it? EDIT: Here's the command line I'm currently using to launch it: start /min C:\windows\system32\mstsc.exe c:\rdp\ServiceRunner.rdp

  Read the article

• Remove dual boot screen

  - by DoubleP90

  some time ago i bought an SSD and since i had to reinstall windows i bought windows 8 with it. I kept windows 7 on my old HDD and i installed Windows 8 on the SSD. For some time i had both, and a dual boot screen would allow me to switch between them. But now i deleted the windows 7 partition and merged it to the partition where i keep all my files, movies etc. But i still have the dual boot screen showing up with windows 8 and windows 7 options. How can i remove the dual boot screen and just make it boot to windows 8?

  Read the article

• Very Dark Windows 7 Screen

  - by user147521

  My Gateway laptop -Windows 7- screen became too dark a few days ago after I finished installing Windows automatic update. I can see nothing unless I use a flashlight. Windows login screen is the only bright screen for few seconds. What should I do to resolve this issue? I checked power-saving/ Power Options settings and rebooting in Safe Mode. I tried to lower the refresh rate but it did not allow me. The laptop adapter type is ATI Radeon Xpress series. I calibrated display color. I uninstalled and reinstalled the adapter. I tried to update the driver but the driver is up to-date. Any help would be appreciated.

  Read the article

• How to not startx in hosted inux CentOS 5.5 ,and how to make full screen

  - by user61104

  Hello all Im beginner to VMWare player , im using CentOS 5.5 as the virtual OS and installed the VMWare Player in windows xp 32 bit And its working great , but when I like to start the GNUME gui to use x server its starting the GUI desktop right inside the VMWare server I like it just to start , and I will connect form out side ( for example with xming x server ) how can I do that ? Second question is how can I make the VMWare server with the GUI display to be full screen on my desktop ? Now when I resize the window its getting full screen but the Linux main window remain centered and small . and I like it to stretch full screen

  Read the article

• Pressing zero key brings up lock/switch user screen in W7

  - by qinghua

  This issue started after my cat walked all over the keyboard... Whenever I press the "zero" key, the screen goes black and I'm taken to the lock/switch user screen. The other functions of the key work fine - it can produce ) and / like usual. Numlock is off, and as far as I know, my computer doesn't have Function Lock. If I log out of my user account and sign in as a guest, the "zero" works again, but if I create a new user profile, it doesn't work. I get the same issue when I hit "zero" using the on-screen keyboard. My keyboard layout is set to US English. I've uninstalled and reinstalled the ATK package, and updated my keyboard drivers. I have an ASUS U43JC-X1 laptop running Windows 7, and I haven't installed any new programs lately.

  Read the article

• Can't get to the login screen

  - by Rod

  I upgraded my wife's Windows 7 machine, to Windows 8 Pro, about 10 days ago. She's been using it fine ever since. We typically leave our desktops running 24/7, and just turn off the monitor. This morning she turned the monitor on, and saw the screen with the Seattle Space Needle, and then she pressed the enter key to get to the login screen. Nothing happened. Next she pressed the mouse key. Nothing happened. The mouse moves around fine. But we can't get it past the Seattle Space Needle screen. She replaced the batteries in both her keyboard and mouse recently. So, what's going on? How do we fix it?

  Read the article

• Windows 7 hangs at Welcome screen with "EXPLORERFRAME.dll" error

  - by Andika Setiawan

  I have a problem with my Windows 7 which fails to startup, and it happens frequently. I already tried to fix it, but nothing happened. I checked my hardisk and there is no badsector detected. Its stop in the Welcome screen and I get the following message: C:\Windows\System32\EXPLORERFRAME.dll is either not designed to run on Windows or contains an error. The Welcome screen then disappears and I get a totally empty screen with a cursor. What happened and how can I fix it?

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >