Search Results

Search found 7940 results on 318 pages for 'intel wireless'.

Page 75/318 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• How to set wifi driver settings to prefer 5 GHz channel above 2.4 GHz

  - by Wouter

  Currently I'm in a new building of my university. In this building my wifi often breaks down and then restores connection again. This is really irritating since it happens a lot. Now as a coincidence there were some tech guys running around here and where asking everyone if the wifi was doing fine. I told them that my wifi tears down all the time and then reconnects. They figured out that my wifi is switching all the time between the 2.4 GHz channel and 5 GHz channel. They asked me if I could acces the driver settings of my wireless card. Unfortunately I don't know how to do this is in either Linux or Windows. And unfortunately again they only knew the windows solution xD. So I hope somebody can tell me how I tell my wifi that it should stay on the 5 GHz network and not disconnect and switch to the 2.4 GHz channel?

  Read the article

• Unity GUI pauses/freezes for less than a few seconds

  - by Ahmad Nassri

  I've just got my new Lenovo ThinkPad X220 with Intel HD graphics (I'm not sure what the chip is) and I've installed Natty. Everything works great out of the box, except there are short pauses/freezes in the UI that randomly occur, they last less than 2 seconds, actions are still taking place in the background (like typing) when the UI un-freezes I can see the characters I've typed, the app I've clicked, loaded . I can confirm that this is only happening with the new Natty 3D interface, I've tried 2D and the classic interface and there were no issues. Googling this topic seems challenging as I can't relate the problem in keywords. And I keep getting results relating to full GUI freeze which I don't have. This is troubling since I have Natty 3D running on older machines without any issues . I wonder if anybody else have experienced this or came across this issue before. Thanks.

  Read the article

• help w/ macbook & latest ubuntu

  - by dirtyglove

  what is the latest version of ubuntu i can run w/ WORKING wifi on my macbook 4,1(early 2008)? i dual booted my mac os x lion alongside 12.10 ubuntu but cant figure how to get the wireless to work? so i downgraded to 10.10 for now.. is 10.10 the latest version i can have on my macbook with working wifi? or is there another? or am i just missing a noobish terminal code to fix the drivers? help appreciated! thanks

  Read the article

• Two Wifi Icons in Panel [Solved]

  - by Alex

  I have the exact problem in 13.10 as this user Two Wifi indicators in panel. Here are some screenshots: Here are some screenshots from another user: http://ubuntuforums.org/showthread.php?t=2183020&p=12825563 ifconfig and iwconfig outputs $ ifconfig lo Link encap:Local Loopback inet addr:XXXXXX Mask:XXXXXXX inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2243 errors:0 dropped:0 overruns:0 frame:0 TX packets:2243 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:209889 (209.8 KB) TX bytes:209889 (209.8 KB) wlan0 Link encap:Ethernet HWaddr XXXXXXXXX inet addr:XXXXXX Bcast:XXXXXXXX Mask:XXXXXXX inet6 addr: XXXXXXX Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5925 errors:0 dropped:0 overruns:0 frame:0 TX packets:3361 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2951818 (2.9 MB) TX bytes:630579 (630.5 KB) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"XXXXX" Mode:Managed Frequency:2.437 GHz Access Point: XXXXXXXX Bit Rate=72.2 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=49/70 Signal level=-61 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:153 Invalid misc:472 Missed beacon:0

  Read the article

• No Internet On 12.04.1

  - by David Ramos

  I have no internet on Ubuntu 12.04.1 so i'm on a desktop so I got to install a .exe program to run my wireless card for my desktop so I got internet access, But I can't seem to download wine or its source files. If I do I put on my usb and boot into Ubuntu but then when I try to open it I get the programs source files etc. Anyone who could help me Please do :| ( I can't install wine from software center since I have no connection online). Note : I can download my stuff on windows 8 boot so I can transfer files to my usb to run on Ubuntu.

  Read the article

• Wifi works but doesn't start automatically on ubuntu 11.10

  - by Nikita Kononov

  Good evening everyone, I have got an issue which I hope you will help me to solve. I was trying to update my Kernel in ubuntu from this web-site http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.2-rc4-oneiric/ And everything went smooth. But, for some reason, my wifi doesn't work in new Kernel so I decided to switch back to my old one 3.0.0-17 generic and to my surprise WIFI doesn't start automatically eventhou it was working. What I mean is that I have to click on wifi icon and put a mark Enable Wireless. This is not a really serious issue but I don't like switch on everytime at log in my WIFI because before that it was working when system started. What is the cause of this and how to fix it. Thank you very much for you help.

  Read the article

• How do I ban a wifi network in Network Manager?

  - by Chris Conway

  My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password that I don't know. The network in question is not listed in the "Edit Connections..." dialog and I can find no reference to it in any configuration file, but still the password dialog pops up every time my main connection drops. Is there a way to blacklist a wireless network so that the Network Manager will never attempt to connect to it? Or, equivalently, how can I remove the configuration data that causes the Network Manager to attempt to connect to this particular network?

  Read the article

• Can't boot Ubuntu 12.10 32 or 64 Bit, only Ubuntu 12.04 32 Bit [closed]

  - by Alexander

  Possible Duplicate: My computer boots to a black screen, what options do I have to fix it? i tried to install Ubuntu 12.04 64Bit, 12.10 32 and 64Bit, but it doesn't work. I'm used the Ubuntu 12.04 32Bit Start Disc Creator and also Unetboot on Win7, the installation-process are finished and i restart without the Stick. I can choose for example 12.10 and it starts writing "start ... [OK], ...", but then it hangs most on "Stop Kernel Messages [OK]". Then i can only shutdown normal the system and it writes stopping, shutdown and something like that. I am use an Aspire One D270 Netbook with Intel Atom N2600. It also doesn't work to try Ubuntu 12.10 from running on USB Stick. It starts, but then its black and the cursor blink on the left upside. Please can you help me? :(

  Read the article

• Broadcom STA driver doesn't work well with BCM4313

  - by Oli

  Following on from my other question about our new Samsung Q330, I've noticed that the wireless is incredibly flakey. It can connect but after a little use, especially if it does a lot of downloading at once (read: install something from the Software Centre), the connection stops working. Network Manager still see the connection, there's just no network throughput. I've simple tests like pinging other local network hosts and they just fail. The Samsung Q330 has a Broadcom BCM4313 wifi card (it's proper ID: 14e4:4727) and it's running on the Broadcom STA drivers that Jockey suggests (it didn't work at all without this). I did try installing b43-fwcutter but this just didn't do anything. I was expecting a configuration screen to come up (to select a firmware) but it never did. This page suggests the newer brcm80211 driver might be able to help, but I don't know how to install that. If you think this is the right route, please let me know how one goes about installing it.

  Read the article

• Monitor resolution messed up, monitor is unknown.

  - by Kaustubh P

  Is there anyway to reset my monitor? My moitor is using the xorg.conf file. I use 10.04, without any Graphics Card. My monitor is an Acer X193W, with a native resolution of 1440x900. This is my xorg.conf file: Section "Screen" Identifier "Configured Screen Device" Device "Configured Video Device" Monitor "Test" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1440x900_60.00" EndSubSection EndSection #Section "Device" # Identifier "Configured Video Device" # HorizSync # VertRefresh #EndSection I still cant view the native resolution, even when defined in the xorg file. An way I can revert to the default, or delete some files, to make the system detect the monitor again? My last resort is the cvt method, and adding it to the xrandr file. EDIT: I use Intel Drivers. My /proc/fb contains 0 VGA16 VGA

  Read the article

• nvidia GT 525m no screen found

  - by Pavan

  I'm a Dell XPS user with nvidia GT 525M with Optimus. When I installed nvidia I was greeted with blank screen. And the error in nvidia log was "Fatal error : No screen found". So after searching for the solutions I figured that I have to insert "BusID" in xorg.conf file. After rebooting I was again greeted with blank screen with error "Fatal error : screen already occupied". I don't what exactly the problem is. Do I need to blacklist Intel inbuilt graphics to nvidia in my machine or anything else needs to be done? Please guide me.

  Read the article

• Network Manager kicks off abruptly

  - by Vijay Selvaraj

  I have installed Ubuntu 10.10 and trying to connect with my ADSL Wireless broadband internet modem using Linksys WUSB600N receiver. The good news is the OS is able to detect my wifi network and I am able to hook to network over WPA authentication with basic settings. But the network goes off abruptly and never connects again until I reboot the machine. I have Windows 7 as dual boot on my machine. The same adapter works perfectly with Windows 7 but not in Ubuntu. Is there anything in need to tweak to make things working or do I need to try any other better network manager on Ubuntu?

  Read the article

• Mouse scroll issue after kernel build

  - by Anish S Kumar

  I have a Intel Cedar Trail netbook. For graphics to work, i had to build kernel 3.1 with the drivers. I followed the steps in this document After doing that, now my graphics is fine, but my mouse scroll does not work. Is that because I have not build the kernel properly? Have i missed selecting some options in the kernel compile menu? It will be nice if someone can help me. Also my wacom bamboo tablet is not recognized, i have installed the xserver-xorg-input-wacom drivers.

  Read the article

• /etc/X11/xorg.conf doesn't exist?

  - by BBetances

  I'm trying to get my video card properly setup to handle 3D acceleration. After searching a bit, I've come across a few howtos that tell me I need to edit my xorg.conf file. That file doesn't exist. X.org is installed by default, I'm sure, and I figured this video card would be widely supported. 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) Any ideas on how I can get this to work properly and play Starcraft II? Or any game for that matter? No resolution problems or anything, just no 3D rendering.

  Read the article

• Cannot connect to a Wifi network chipset AR9287

  - by Fritz

  After updating my newly installed ubuntu 10.10. I can't connect to the wifi network anymore although it is showing it. Tried to install manufacturer driver INF file via ndiswrapper only makes things worst - lost my wifi. Downloaded and installed the compat-wireless driver for the Atheros AR9287. After installing, i got my wifi connection again but after rebooting I can't reconnect again. The Wifi access point is showing 2/5 to 3/5 signal strength. Laptop: Acer Aspire 4741G Wifi Adapter: Atheros AR9287 OS: Ubuntu 10.10 64bit

  Read the article

• Acer Aspire One 722 broadcom 4313 wifi

  - by Colin Matheson

  I had an Acer Aspire One 722 with the Atheros Wifi card and it worked fine on 11.04. So we bought 200 of them for our school. However these all came with the Broadcom BCM4313 wireless card and there are issues. It is using the brcmsmac driver and they connect initially. However after a time (sometimes just a few webpages) some of them lose connection. However, they still have an IP and network-manager says they are connected, but no pages load and you can't ping anything on the LAN or internet. A disconnect/reconnect can fix it, but sometimes a restart is required. It happens frequently so is a major issue. Lots of broadcom drivers are blacklisted: bcm43xx, b43, brcm80211. Any ideas or experiences with the broadcom4313 card? Please save these computers from a Windows fate!

  Read the article

• Few problems on Dell xps 15 L502 (screen brightness ,blutooth,wi-fi power management problems)

  - by Web-E

  I am running ubuntu 11.10 32bit in my dell xps L502. Working good except few problems. Blue tooth always turned on reboot,I would like to turn it off always. Screen brightness is not saved.Every time I reboot, the screen goes back to full brightness.How to save that? and the most important problem is internet speed through wi-fi is really very slow when operating on battery.the card is intel centrino Advanced-N 1030 with integrated blue tooth. Any help will be appriciated... :)

  Read the article

• WiFi and Bluetooth will not work on Dell Studio XPS 1645

  - by Ross

  Today I acquired a Dell XPS 1645. Ubuntu seems to run alright on it however The bluetooth is not detected and the WiFi doesn't work. The WiFi is especially weird because I actually have the restricted driver enabled for it. It also worked for a short while when I first booted into Ubuntu however now there isn't even an option to enable wireless. If anyone could possibly help me out with this I'd deeply appreciate it. I've not had to return to Windows for a good while and it's not something I want to have to do now.

  Read the article

• How to make "xrandr" work with GMA500?

  - by Nwbie

  Is it error at driver of graphic chip or Xorg or kernel? I am Asus T91mt with GMA500, Ubuntu 12.04.1. I would like too see only a notice of connection at least. A log of xrandr: $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation System Corporation System Controller Hub (SCH Poulcbo) Graphics Controller (rev 07) vp@vc:~$ xrandr --verbose xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 600, current 1024 x 600, maximum 1024 x 600 default connected 1024x600+0+0 (0x138) normal (normal) 0mm x 0mm Identifier: 0x137 Timestamp: 26863 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1024x600 (0x138) 0.0MHz *current h: width 1024 start 0 end 0 total 1024 skew 0 clock 0.0KHz v: height 600 start 0 end 0 total 600 clock 0.0Hz vp@vc:~$ xrandr --prop xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 600, current 1024 x 600, maximum 1024 x 600 default connected 1024x600+0+0 0mm x 0mm 1024x600 0.0* vp@vc:~$ Please help, i am linux newbie and i am tired ;/

  Read the article

• Unable to use TL-WN821N

  - by udiw

  Hi, I got a TP-LINK USB wireless module - TL-WN821N, using Ubuntu 10.4 (same problems were also seen in 10.10). From everything I've read online, the usb should work just fine, since the Atheros ar9170 is built into the kernel. However, when I plug it in, it is detected as a USB device, but there is no wlan associated with it, and basically - nothing happens. Am I doing something wrong? what should I do so that the Atheros driver is associated with this device? btw, on Windows it works fine (with the drivers). Some logs: $ uname -mr 2.6.32-28-generic i686 $ lsb_release -d Description: Ubuntu 10.04.2 LTS $ lsusb ... (trimmed) Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 017: ID 0cf3:7015 Atheros Communications, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub $ lsmod |grep ar9 ar9170usb 51296 0 ath 7611 1 ar9170usb mac80211 205402 3 ar9170usb,iwl3945,iwlcore cfg80211 126528 5 ar9170usb,ath,iwl3945,iwlcore,mac80211 led_class 2864 4 ar9170usb,iwl3945,iwlcore,sdhci

  Read the article

• Updated 11.10 - now trackpad and wifi won't work. How can these be fixed?

  - by Aron Standley

  I reinstalled 11.10 on my Asus EEE 1005HA, and my mousepad hasn't been working since. I've tried the workarounds mentioned in this post: http://ubuntuforums.org/showthread.php?t=1867357 but, I get the message on the command line that says, "Synaptic isn't installed." When I go to the network settings to install Synaptic, I can't turn on wifi - no wireless options exist. How can I turn on wifi from the command line, on a new 11.10 install? Or, is there a way to turn on the trackpad and wifi from the install thumb drive? How can I move forward?

  Read the article

• I need acpi=off to boot, but this seems to disable wifi

  - by TheExp3rt

  To boot my computer, I have to use acpi=off in kernel options. Doing this apparently causes my wifi adapter to be switched off and prevents my mouse and USB keyboard to not work. If I change acpi=off to nomodeset, it fixes these problems. But then it sets my computer at a lower resolution. I am currently running Kubuntu 13.10, although none of the updates, starting from 12.04, changed the need for acpi=off. I assume I need acpi=off in because I have an oldish computer with an intel motherboard How can I boot without acpi=off? Output of uname -a: 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Need instructions how to create wpa_supplicant.conf and add fast_reauth=0 to it // WPA 2 Enterprise & frequent wlan disconnects

  - by nutty about natty

  Like many other natty users on a university / academic network, I'm experiencing annoying frequent disconnects / hangs / delays. See, for instance: https://bugs.launchpad.net/ubuntu/+source/wpasupplicant/+bug/429370 I would like to learn how to add fast_reauth=0 to the wpa_supplicant.conf file. This file, it seems, does not exit by default, and needs to be manually created first: http://w1.fi/gitweb/gitweb.cgi?p=hostap.git;a=blob_plain;f=wpa_supplicant/README [quote] You will need to make a configuration file, e.g., /etc/wpa_supplicant.conf, with network configuration for the networks you are going to use. [unquote] Further, I installed wpa_gui which probably needs to be launched with parameters, else it's pretty blank... What I'm hoping for is this: That creating a wpa_supplicant.conf file with fast_reauth=0 in it, saving it to the relevant path, will work and make my uni wireless (more or even completely) stable. I read mixed reviews about wicd (as an alternative to the network manager). Also note that on my basic wlan at home (with bog-standard wpa encryption) the connection is stable. Thanks!

  Read the article

• Cannot scale frequency of a Core i7 2720QM

  - by user51414

  I own a Dell Latitude E6520 with an Intel CPU (Core i7 2720QM). After installing cpufrequtils, I get the following message : cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009 Veuillez rapportez les erreurs et les bogues à [email protected], s'il vous plait. analyse du CPU 0 : **pas de pilotes cpufreq reconnu pour ce CPU** maximum transition latency: 4294.55 ms. In English : no cpufreq pilot found for this CPU. Thus my CPU runs always at full speed (2,2 GHz) which consume the battery and shorten its life. I don't either know how to activate turbo mode. Please help ! Regards, Al

  Read the article

• Install reliance Driver software in ubuntu 14.04

  - by A Umar Mukthar

  I'm Using Huawei ec 150 dongle. I need to install driver software It is quiet a big task for begineers in linux. So i took this matter over here. EDIT Output of lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 12d1:140b Huawei Technologies Co., Ltd. EC1260 Wireless Data Modem HSD USB Card Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse Bus 002 Device 002: ID 046d:c31d Logitech, Inc. Media Keyboard K200 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >