Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 75/332 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• machine crash when connecting to external harddisk

  - by Gnot

  i recently had a problem with my laptop. when i booted up the machine, i would get a SMART failure error message and when i pressed F1 to continue, it would take a very long time to boot and it would come back to the same error message again. thinking that my hard disk was dying, i bought a new hard disk and installed on my laptop and so now my laptop is alright. however i need to recover data from that old hard disk, so i bought an external hard disk case and placed the old hard disk onto the case and connected to my laptop with USB. the first few times when i connected, i could see the files from the old hard disk and managed to copy some files over although it took extremely long to transfer. but now whenever i connect to the old hard disk, after a few minutes, my laptop will crash and re-boot. do you think my old hard disk is dead beyond repair? or you can offer some help here? any assistance would be appreciated!

  Read the article

• Why can't I ping server? VMware set to 'Bridged' loses IP address

  - by Dave

  I have installed a fresh 10.04 server onto a laptop on a home network as a VMware machine and set network connection to 'Bridged: connect directly to the physical network' from within VMware and rebooted the server. It then loses its IP address. dhclient eth0 says "No working leases in persistent database - sleeping" DHCP is working fine on the wi-fi router. The laptop is wired to a wireless router and from there wirelessly to a desktop. Desktop and Laptop can ping each other from Windows. I can ping the VM from Windows on the same laptop, but not from the desktop. Strangely ping has started to resolve hostnames to IPv6 addresses and not IPv4. Don't know whether that's connected? A kick in the right direction would be greatly appreciated. I've been an Ubuntu desktkop user for a few years, but new to ubuntu servers.

  Read the article

• Methods to access US Netflix from Chromecast?

  - by lfk

  I need to access US Netflix using Chromecast but changing router configuration is not an option (I don't have access to the wireless router). On my laptop I use VPN, so one option is to use my laptop as a hotspot, but I don't always have cable connection for my laptop. Besides I was hoping to need only my iPad to use the Chromecast. Is there any other way or should I return the Chromecast while I still can?

  Read the article

• How do I debug an overheating problem?

  - by Tab

  Hello guys. I have a problem with my Laptop (Dell Inspiron 1564 Core i5 4GB Ram VGA ATI Mobility Radeon HD 4300 running Ubuntu 10.10 32bit). It shuts down abruptly without even a lag in the application I am working with before shutdown. I think it's overheating problem. Actually the laptop is hot all the time when I am running Ubuntu. When I switch back to windows, even with intense load it won't shutdown or show any problem as long as I keep proper ventilation (when the air openings are blocked it does the same). Actually on Ubuntu i don't usually do things that need much CPU power, usually surfing internet, coding web pages and sometimes playing with python and ruby. I am not enabling desktop effects so no GPU load except the normal GNOME gui. Now as I am writing the Processor load in the panel monitor applet is 0%, Memory 11% by programs, 22% by cache. And i have CPU Frequency monitor for each of the 4 cores set to 1.20 Ghz (the lowest possible value, i am not sure if this applet does really limit CPU usage). Running sensors in terminal gave me temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) hddtemp /dev/sda at the terminal gave me /dev/sda: WDC WD3200BEVT-75ZCT2: 46°C All that fine but the laptop is Really hot i can feel it in the keyboard, mouse pad is painful to touch, and the fan is always spinning. I am also placing 2 small fans running on USB under the laptop right now and the laptop is lifted over the fans so it's well ventilated. When I am running windows it doesn't get that hot except when there is a really big load on the CPU and this is keeping me away from using Linux for everyday tasks. Actually I don't care much for speed as I can deal with low speed it's not going to shutdown abruptly. So please if you can help me and tell me what are the possible causes, where should I start ?

  Read the article

• Ethernet Connection Unavailable

  - by fabikw

  I'm running Ubuntu Server 12.04 on a laptop with an Intel NIC (driver e1000e). When I connect the ethernet port to the internet (college network, DHCP) it works out of the box. Now I'm trying to connect it to a networked USRP (if you want to know what it is). A friend of mine managed to do this in his laptop (running regular Ubuntu 12.04) just by setting up a new Wired connection in the Network Manager with appropriate addresses. However, when I do the same, no wired connections are available. The output of nmcli -p dev is =========================================== Status of devices =========================================== DEVICE TYPE STATE ------------------------------------------- wlan0 802-11-wireless connected eth0 802-3-ethernet unavailable but the cable is connected to the device and the device is powered up. Any idea how to solve this? UPDATE: After stopping the network-manager service, setting up the connection manually and starting the service again, it now detects the ethernet connection. However, the device still can't receive data and doesn't answer to pings. UPDATE 2: As suggested I tried using a cross over cable but the result is exactly the same. However, I found out that connecting the device to the dock (as opposed to directly to the laptop) works fine. I know that the ethernet port in the laptop works fine, because connecting to the network through it works. Is it possible that the port in the laptop doesn't support Gb Ethernet (because that's what the device requires) but the one in the dock does?

  Read the article

• install Ubuntu and remove Windows 7

  - by dani

  I'm using Windows 7 on my laptop (2GB RAM, 250 GB HDD). I want to install Ubuntu and remove Windows 7. I have Partitioned my laptop into 2 partitions: , C Drive - 105 GB and D Drive - 145 GB. I want to install Ubuntu on C drive all my data in D drive, no backup I have already selected the "Try something else option " /dev/sdb /dev/sdb1 ntfs 104855 MB unknown C drive /dev/sdb5 ntfs 145192 MB unknown D drive I need help using the "Try Something Else" Option My course of action: laptop power on bootubuntu nextsomething elsepartition.

  Read the article

• Can I speed up File Sync for Ubuntu One?

  - by tapan

  I am using ubuntu 11.04 on my home laptop and the same on my work laptop. I just wanted to sync the work folders on my home laptop to my office laptop which is ~300Mb of data. This would normally be a short download but ubuntu-one is taking forever to sync it. Any ideas what could cause this? I am not behind any firewall or anything of that sort. I have not checked the limit bandwidth box in the preferences.

  Read the article

• Using video ports 'backwards'

  - by ACarter

  If I want to connect my laptop, which has a VGA output, to a monitor, I plug a VGA cable into both ends. The output being my laptop, and the input the monitor VGA output sockets are the same as VGA input sockets however, so what if I want to use my laptop as the monitor, with the video being outputted from somewhere else? As I said, VGA's output is the same as input, so in theory, I have the hardware in my laptop to do this. But presumably I need some software. So can I use the VGA port on a laptop as a video input? (And also, can this be done with HDMI?)

  Read the article

• No sound, even though devices appear OK

  - by Felix

  I have a weird problem. Sound used to work until a couple of days ago, but now the builtin speakers in my ThinkPad W520 have stopped working. This happened after either: An update Using the headphone jack in my laptop dock (I had used the jack in the actual laptop before without issues) As I was saying, the speakers do not work at all. Sometimes I get a clicking sound from the laptop, which I assume is the system beep. This does not happen consistently. If I plug headphones in the laptop, I do get sound in them. I have tried playing with all the possible settings both in gnome and using alsamixer. Some screens: What could I try next?

  Read the article

• X11 forwarding from one server to other

  - by n3oblit7

  I have a setup where I need to forward X11 from my local machine (laptop) to a Virtual machine. The server hosting this VM cannot be reached directly from my laptop. I need to first login to a gateway and from this gateway, I can access the VM. How can I forward X11 from my laptop to this VM? I have tried following but these do not work: [laptop # ] ssh -X [gateway] [gateway # ] ssh -X [VM] [laptop # ] ssh -tX [gateway] ssh -X [VM] I could forward X11 only till the gateway. (DISPLAY variable gets set on gateway)

  Read the article

• Disabling monitor reconfiguration when closing lid

  - by Tomas

  I often need to move my laptop from one working place to another. When I do this, there are two events Ubuntu responds to by changing the monitor set up: Removing/attaching the VGA cable Closing/opening the lid of the laptop While removing the VGA cable gives me what I need (single screen, highest native resolution on the external screen if connected; otherwise highest resolution on the laptop), the laptop close/open lid response is not as good. Every time I close or open the lid, Ubuntu reconfigures the monitor set up. When I close the lid now... the screen goes black for a few seconds and it switches to clone, with my laptop screen disabled. Reopening results in... briefly a black screen, then the external monitor being used as desktop extension. Ubuntu thinks too much. My first and foremost question: Is there any way to let Ubuntu ignore lid close events? Ideally (or when there's no way to solve above question) I'd want to change how it deals with the screen reconfiguration. Why does Ubuntu toggle the screen configuration between external, clone and single display? Can't I just configure it to always use the external monitor, when present, in single screen mode? Note that similar questions have been asked before (most notably this one), but these have been closed perhaps wrongly. Any ideas are very welcome, I don't mind playing around a bit to see if something works.

  Read the article

• How do I remote desktop to my work's Windows box from my Mac at home through VPN?

  - by CT

  I would like to remote desktop from my Macbook to my Work's laptop from home. I connect to the work's network via Cisco VPN. My Cisco VPN clients connects fine in Mac OS X but I am unable to remote desktop. I am also unable to ping my work laptop. The laptop is powered on and not sleeping. I can access it via LogMeIn. If I were to actually pug into our network at the building. I can remote desktop to my work laptop from my Macbook. If I use a Windows virtual machine and connect using the Windows Cisco VPN client, I am able to RDP and ping my work laptop. What is wrong with my OS X VPN connection?

  Read the article

• Computer becomes unreachable on lan after some time

  - by Ashfame

  I work on my laptop and ssh into my desktop. I use a lot of key based authentication for many servers for work but recently I couldn't login because ssh would pick up and try all the keys and it stops trying before ultimately falling back to password based login. So right now I am using this command: ssh -X -o PubkeyAuthentication=no [email protected] #deskto The issue is after sometime the desktop would just become unreachable from laptop. I won't be able to open its localhost through IP and today I tried ping'in it and found a weird thing. Instead of 192.168.1.4, it tries to ping 192.168.1.3 which I am sure is the root cause as it just can't reach 192.168.1.4 when its actually trying for 192.168.1.3 Ping command output: ashfame@ashfame-xps:~$ ping 192.168.1.4 PING 192.168.1.4 (192.168.1.4) 56(84) bytes of data. From 192.168.1.3 icmp_seq=1 Destination Host Unreachable From 192.168.1.3 icmp_seq=2 Destination Host Unreachable From 192.168.1.3 icmp_seq=3 Destination Host Unreachable From 192.168.1.3 icmp_seq=4 Destination Host Unreachable From 192.168.1.3 icmp_seq=5 Destination Host Unreachable From 192.168.1.3 icmp_seq=6 Destination Host Unreachable From 192.168.1.3 icmp_seq=7 Destination Host Unreachable From 192.168.1.3 icmp_seq=8 Destination Host Unreachable From 192.168.1.3 icmp_seq=9 Destination Host Unreachable ^C --- 192.168.1.4 ping statistics --- 10 packets transmitted, 0 received, +9 errors, 100% packet loss, time 9047ms pipe 3 Also the ping command message comes in multiple and not one by one. (izx answer's the weirdness I thought there was in ping command.) I did check for desktop, its local IP is still the same, so something is going on in my laptop. Any ideas? P.S. - Laptop runs Ubuntu 12.04 & Desktop runs Ubuntu 11.10 Laptop is connected through wifi to router and Desktop is connected through LAN to router. Update: Even after setting up static IP leases in router settings, I again ran into this issue.

  Read the article

• Processor upgrade on a laptop vs. Ram upgrade. Also does ram always matter?

  - by Evan

  I have a Dell Inspiron 14r (N4110) with an Intel Core i3 and 4gb of ram. It runs very smoothly, however gaming on this laptop is very limited. This is mostly because of integrated graphics but i have seen a computer with a Core i5, and very similar specs otherwise, run games that the N4110 cannot. This other computer has integrated graphics and 6gb of ram. I am wondering whether upgrading ram or upgrading the processor make the most difference in performance. Which setup would get better performance, an i5 with 4gb of ram or an i3 with 8 gb of ram? (Both with integrated graphics) Also, is there a certain point at which you have too much ram for the computer to ever possibly use? For instance is there really any difference in performance between 8 gb and 16 gb of ram?

  Read the article

• Samba issue with sharing directories on NTFS/FAT32 (Mounted Drives) ???

  - by Microkernel

  Hi guys, I have some strange problems with Samba server. I am using samba Version 3.5.4 on Ubuntu 10.10. I have two windows-xp machines, one on VirtualBox on Ubuntu and another office laptop. Windows machine on VBox has no issues in accessing the shared folders, but the laptop is not able to access all the shared content. The issue faced on laptop is = Shared folders on Ext3 drives have no issues in accessing, but the contents shared on NTFS and FAT32 drives (mounted ones) are not accessible. When I try to open the shared folder, it asks for user name and password, but doesn't accept when I provide it. (even if I provide admin login details!!!). I changed workgroup value to the domain_name in office laptop, but still the problem persists... Here is the smdb.conf I am using... [global] workgroup = XXX.XXX.ORG server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d guest ok = Yes [homes] comment = Home Directories [printers] comment = All Printers path = /var/spool/samba read only = No create mask = 0700 printable = Yes browseable = No [print$] comment = Samba server's CD-ROM path = /cdrom force user = nobody force group = nobody locking = No Workgroup Was defined as "HOMENET" before, changed it to domain name on the office laptop thinking it was the problem, but for no avail Thanks in advance Regards, Microkernel

  Read the article

• Is it possible to impersonate another WAP by intercepting communication with other client?

  - by OSX NINJA

  There is a well known WAP that lots of people use. Someone comes in with a laptop equipped with a sniffer. The laptop sniffs people trying to log on to the WAP. It intercepts the connection, and when people try to log on to the WAP, they unknowingly log on through that person's laptop instead. All communication between the WAP and people's laptops go through that person's laptop. That person's laptop is able to block access to certain websites that the WAP would normally allow.

  Read the article

• My notebook goes offline automatically after some time

  - by air

  I have about 3 computers and 1 windows 2003 server in office and 1 network printer (HP LJ 2840). My network printer is installed on the server. I an sharing this printer on all clients with windows XP. All other computers are fine only 1 HP laptop. When I start that HP laptop the printer works fine but after some time, printer goes offline and I can't print until I restart the laptop. When that laptop goes to offline mode, I can work on that laptop, I can use shared network drives, I can ping server but it shows offline mode icon in Task bar status area. If i use \\servername I can see the server's shared items and if i go to printers I can't see any printer... I try my best to solve this issue, but I can't. Thanks

  Read the article

• How to recover Windows Vista product key?

  - by empi

  Two years ago I've bought asus laptop with Windows Vista preinstalled. I also received recovery dvd with it. Now, I want to reinstall Windows and fully format the hard drive. However, the sticker with Windows product key under the laptop is unreadable. I tried recovering the key with ProduKey and similar software but they show another product key - it is different than the one from the sticker (I checked on another asus laptop and on my dell laptop). Do you know if I it is possible to reinstall the operating system with the product key obtained from ProduKey? If not, how can I retrieve the product key? It seems stupid that it was only placed on the sticker that is destroyed after some time if you frequently hold the laptop on your lap. I've tried ProduKey and Recover Keys and they show the same key. However, it's not the one from the sticker. Thanks in advance for help.

  Read the article

• Dell XPS M1330 - power cable pulled by accident and now it won't turn on

  - by jim

  I have a similar problem to what has been posted on this site about when I plug in my Laptop adapter the green light comes on as expected; but, when I plug it into the laptop it goes out. In my case, I know it's not the adapter because I have 2 and they both experience the same issue. I'm quite certain the problem is a short in the laptop. I was using the laptop today and the power cord was pulled out by accident and now i'm into this predicament. How or what do I check on the laptop to isolate the problem? Thanks!

  Read the article

• Syncing Large Directories/Filesystems using USB Drive [closed]

  - by Alan Lue

  Does anyone have a solution for syncing large directories/filesystems using just a USB flash drive (and specifically without using a network connection)? The objective is simply to sync a user directory between two computers. The contents of the user directory could amount to a large quantity of data—say, a quantity larger than could be stored on any single USB drive—but the aggregate size of changes that must be propagated by a single sync could easily fit on a USB drive. As an example, suppose a user directory is already synchronized between a desktop and a laptop computer. Here's a use case: Some changes are made in the user directory on the desktop. We mount a USB drive onto the desktop and copy whatever changes need to be applied to the laptop user directory in order to synchronize the desktop and laptop user directories. We now mount the USB drive onto the laptop and apply the changes. The desktop and laptop user directories are now synchronized. Any ideas? Alan

  Read the article

• How do I remote desktop to my work's Windows box from my Mac at home through VPN?

  - by CT.

  I would like to remote desktop from my Macbook to my Work's laptop from home. I connect to the work's network via Cisco VPN. My Cisco VPN clients connects fine in Mac OS X but I am unable to remote desktop. I am also unable to ping my work laptop. The laptop is powered on and not sleeping. I can access it via LogMeIn. If I were to actually pug into our network at the building. I can remote desktop to my work laptop from my Macbook. If I use a Windows virtual machine and connect using the Windows Cisco VPN client, I am able to RDP and ping my work laptop. What is wrong with my OS X VPN connection?

  Read the article

• External monitor with NO mouse cursor

  - by Csaba Nyerges

  I am using a Fujitsu Siemens Amilo L7310 laptop computer with an external monitor. I'm wishihg to use version 10.04. The problem is, when I plug my laptop into the external monitor with my laptop screen turned either on or off, I do not see the mouse cursor on the external monitor! The mouse cursor is still there, although invisible. If I connect the external monitor to my laptop before swithing both on, the same happens. Is there any solution to make the cursor appear on the monitor?

  Read the article

• Installing Ubuntu on Asus A43SM

  - by Subangkit

  i've Asus Laptop A43SM the specifications can be seen here. I am trying to install Ubuntu 12.04 LTS on my laptop, but something wrong is happening. When I boot up Ubuntu on this laptop the first screen Ubuntu loader shows up, but then it freezes; I can't do anything but push the power button. I've tried to use a usb drive and a CD but that doesn't help. Anyone can tell me how to install Ubuntu ?

  Read the article

• LiveCD not booting/can't install Ubuntu 11.04

  - by user20318

  So, i got a new laptop somedays ago and as usualy, i went formated it to install Ubuntu. Download 11.04 and burned it on my pendrive using my old laptop (running 11.04). When i tryed to boot from the LiveUSB on my new laptop, it just showed me some weird graphics and if i select any option (can't see what im selecting), it gives me a black screen and that is all. Then i tryed to boot with this LiveUSB on my old laptop, and it worked just fine ._. Burned a CD with Ubuntu 11.04 (64bits) and the problem continue. Then i tought it could be my CD Driver, since the laptop is new and all... burned a Windows 7 64 bits DVD and it worked just fine. Also, if i check the CD/Pendrive inside Windows Seven, all the files there are ok. Anyone have any idea of what can be? I found lots of questions about this, but none of them had the weird menus i'm getting ._. oohh... i also get a "prefix is not set" before the weird menu appears :S My sis specs: Intel Core i5 2400 Intel HD 3000 4gb DDR3 If anyone can help, i will be really greatfull ._.

  Read the article

• Syncing Large Directories/Filesystems using USB Drive

  - by Alan Lue

  Does anyone have a solution for syncing large directories/filesystems using just a USB flash drive (and specifically without using a network connection)? The objective is simply to sync a user directory between two computers. The contents of the user directory could amount to a large quantity of data—say, a quantity larger than could be stored on any single USB drive—but the aggregate size of changes that must be propagated by a single sync could easily fit on a USB drive. As an example, suppose a user directory is already synchronized between a desktop and a laptop computer. Here's a use case: Some changes are made in the user directory on the desktop. We mount a USB drive onto the desktop and copy whatever changes need to be applied to the laptop user directory in order to synchronize the desktop and laptop user directories. We now mount the USB drive onto the laptop and apply the changes. The desktop and laptop user directories are now synchronized. Any ideas? Alan

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >