Search Results

Search found 2630 results on 106 pages for 'mount'.

Page 75/106 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• How to use Client for NFS on Windows Vista?

  - by netvope

  I've installed "Client for NFS" on my 32-bit Windows Vista Ultimate. However, I can't find it in the start menu, and can't find any documentation on how to use it. How do I connect to a NFS share using "Client for NFS"? Can I map it to a drive letter? How do I choose connection options, such as my uid/gid, mount as read-only, port number, etc? Ideally I would like to map a NFS share using the command line. You may also suggest alternatives to "Client for NFS".

  Read the article

• vSphere ESX 5.5 hosts cannot connect to NFS Server

  - by Gerald

  Summary: My problem is I cannot use the QNAP NFS Server as an NFS datastore from my ESX hosts despite the hosts being able to ping it. I'm utilising a vDS with LACP uplinks for all my network traffic (including NFS) and a subnet for each vmkernel adapter. Setup: I'm evaluating vSphere and I've got two vSphere ESX 5.5 hosts (node1 and node2) and each one has 4x NICs. I've teamed them all up using LACP/802.3ad with my switch and then created a distributed switch between the two hosts with each host's LAG as the uplink. All my networking is going through the distributed switch, ideally, I want to take advantage of DRS and the redundancy. I have a domain controller VM ("Central") and vCenter VM ("vCenter") running on node1 (using node1's local datastore) with both hosts attached to the vCenter instance. Both hosts are in a vCenter datacenter and a cluster with HA and DRS currently disabled. I have a QNAP TS-669 Pro (Version 4.0.3) (TS-x69 series is on VMware Storage HCL) which I want to use as the NFS server for my NFS datastore, it has 2x NICs teamed together using 802.3ad with my switch. vmkernel.log: The error from the host's vmkernel.log is not very useful: NFS: 157: Command: (mount) Server: (10.1.2.100) IP: (10.1.2.100) Path: (/VM) Label (datastoreNAS) Options: (None) cpu9:67402)StorageApdHandler: 698: APD Handle 509bc29f-13556457 Created with lock[StorageApd0x411121] cpu10:67402)StorageApdHandler: 745: Freeing APD Handle [509bc29f-13556457] cpu10:67402)StorageApdHandler: 808: APD Handle freed! cpu10:67402)NFS: 168: NFS mount 10.1.2.100:/VM failed: Unable to connect to NFS server. Network Setup: Here is my distributed switch setup (JPG). Here are my networks. 10.1.1.0/24 VM Management (VLAN 11) 10.1.2.0/24 Storage Network (NFS, VLAN 12) 10.1.3.0/24 VM vMotion (VLAN 13) 10.1.4.0/24 VM Fault Tolerance (VLAN 14) 10.2.0.0/24 VM's Network (VLAN 20) vSphere addresses 10.1.1.1 node1 Management 10.1.1.2 node2 Management 10.1.2.1 node1 vmkernel (For NFS) 10.1.2.2 node2 vmkernel (For NFS) etc. Other addresses 10.1.2.100 QNAP TS-669 (NFS Server) 10.2.0.1 Domain Controller (VM on node1) 10.2.0.2 vCenter (VM on node1) I'm using a Cisco SRW2024P Layer-2 switch (Jumboframes enabled) with the following setup: LACP LAG1 for node1 (Ports 1 through 4) setup as VLAN trunk for VLANs 11-14,20 LACP LAG2 for my router (Ports 5 through 8) setup as VLAN trunk for VLANs 11-14,20 LACP LAG3 for node2 (Ports 9 through 12) setup as VLAN trunk for VLANs 11-14,20 LACP LAG4 for the QNAP (Ports 23 and 24) setup to accept untagged traffic into VLAN 12 Each subnet is routable to another, although, connections to the NFS server from vmk1 shouldn't need it. All other traffic (vSphere Web Client, RDP etc.) goes through this setup fine. I tested the QNAP NFS server beforehand using ESX host VMs atop of a VMware Workstation setup with a dedicated physical NIC and it had no problems. The ACL on the NFS Server share is permissive and allows all subnet ranges full access to the share. I can ping the QNAP from node1 vmk1, the adapter that should be used to NFS: ~ # vmkping -I vmk1 10.1.2.100 PING 10.1.2.100 (10.1.2.100): 56 data bytes 64 bytes from 10.1.2.100: icmp_seq=0 ttl=64 time=0.371 ms 64 bytes from 10.1.2.100: icmp_seq=1 ttl=64 time=0.161 ms 64 bytes from 10.1.2.100: icmp_seq=2 ttl=64 time=0.241 ms Netcat does not throw an error: ~ # nc -z 10.1.2.100 2049 Connection to 10.1.2.100 2049 port [tcp/nfs] succeeded! The routing table of node1: ~ # esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface 10.1.1.0 255.255.255.0 Local Subnet vmk0 10.1.2.0 255.255.255.0 Local Subnet vmk1 10.1.3.0 255.255.255.0 Local Subnet vmk2 10.1.4.0 255.255.255.0 Local Subnet vmk3 default 0.0.0.0 10.1.1.254 vmk0 VM Kernel NIC info ~ # esxcfg-vmknic -l Interface Port Group/DVPort IP Family IP Address Netmask Broadcast MAC Address MTU TSO MSS Enabled Type vmk0 133 IPv4 10.1.1.1 255.255.255.0 10.1.1.255 00:50:56:66:8e:5f 1500 65535 true STATIC vmk0 133 IPv6 fe80::250:56ff:fe66:8e5f 64 00:50:56:66:8e:5f 1500 65535 true STATIC, PREFERRED vmk1 164 IPv4 10.1.2.1 255.255.255.0 10.1.2.255 00:50:56:68:f5:1f 1500 65535 true STATIC vmk1 164 IPv6 fe80::250:56ff:fe68:f51f 64 00:50:56:68:f5:1f 1500 65535 true STATIC, PREFERRED vmk2 196 IPv4 10.1.3.1 255.255.255.0 10.1.3.255 00:50:56:66:18:95 1500 65535 true STATIC vmk2 196 IPv6 fe80::250:56ff:fe66:1895 64 00:50:56:66:18:95 1500 65535 true STATIC, PREFERRED vmk3 228 IPv4 10.1.4.1 255.255.255.0 10.1.4.255 00:50:56:72:e6:ca 1500 65535 true STATIC vmk3 228 IPv6 fe80::250:56ff:fe72:e6ca 64 00:50:56:72:e6:ca 1500 65535 true STATIC, PREFERRED Things I've tried/checked: I'm not using DNS names to connect to the NFS server. Checked MTU. Set to 9000 for vmk1, dvSwitch and Cisco switch and QNAP. Moved QNAP onto VLAN 11 (VM Management, vmk0) and gave it an appropriate address, still had same issue. Changed back afterwards of course. Tried initiating the connection of NAS datastore from vSphere Client (Connected to vCenter or directly to host), vSphere Web Client and the host's ESX Shell. All resulted in the same problem. Tried a path name of "VM", "/VM" and "/share/VM" despite not even having a connection to server. I plugged in a linux system (10.1.2.123) into a switch port configured for VLAN 12 and tried mounting the NFS share 10.1.2.100:/VM, it worked successfully and I had read-write access to it I tried disabling the firewall on the ESX host esxcli network firewall set --enabled false I'm out of ideas on what to try next. The things I'm doing differently from my VMware Workstation setup is the use of LACP with a physical switch and a virtual distributed switch between the two hosts. I'm guessing the vDS is probably the source of my troubles but I don't know how to fix this problem without eliminating it.

  Read the article

• Opening an oracle database crashes the service

  - by tundal45

  I am experiencing a weird issue with Oracle where the service started fine after a crash. The database mount went fine as well. However, when I issue alter database open; command, the database does not open, gives a generic cannot connect to the database error & crashes the service. Oracle support has not seen this issue before so it's pretty scary. The fact that there are no logs that give any leads as to what could be causing this is also scary. I was wondering if good folks over at Server Fault had seen something like this or have some insights on things that I could try. It's Oracle 10g running on Windows Server 2003. Thanks, Ashish

  Read the article

• Compress, enctypt and upload a directory to an FTP server in Linux

  - by Kristoffer L

  I want to acomplish something rather simple (at least it would seem to be): Compress a directory Encrypt the compressed file Upload the compressed & encrypted file via FTP I also want to acomplish this in an automated fashion on Linux server. TrueCrypt is not really an option as it seems it can't complress a single file, instead you have to make a volume that you mount and move the files into. This question answers how to do the the upload and I know how to compress a directory. It is just the encryption that's giving me problems.

  Read the article

• There are no drives listed during windows 7 system recovery

  - by Kragen

  I'm trying to use the Windows 7 system recovery disk to repair a boot sector, however I'm finding that when I boot the recovery disk, it doesn't list / mount any of my disk partitions, and so I can't perform the recovery. The partitions are all NTFS formatted, and the drivers used to read the disks all seem to be fairly straightforward Microsoft drivers, so I shouldn't need to load any extra drivers to see my partitions (its a Dell Latitude D530) Diskpart correctly lists the partitions (complete with labels) - it just that when I attempt to switch to that partition it gives me the "This partition does not contain a recognised file system" message. Has anyone got any idea how I can work out why my partitions are not visible?

  Read the article

• How to make TimeMachine back up contents of any path or mounted volume

  - by Olfan

  I keep different types of data in different encrypted sparsebundle images (say, one for each client) which automatically mount upon login but can't be opened by anybody other than myself. So, after login I have a number of virtual volumes in /Volumes/ which keeps my client data both secure and organized. How do I include data inside these virtual Volumes in TimeMachine's backups, or data residing in any path on any partition/volume? I found a promising solution description at blog.eurocomp.info involving editing the com.apple.TimeMachine.plist but all I can get TimeMachine to do is backing up the sparsebundle files themselves. I want it to back up the files inside the mounted image, though - something like adding /Volumes/Client_abc/ to TimeMachine's search path. Please do not redirect my to this previous question as it doesn't solve the problem at all. Please also refrain from telling me why you think I should not want this answer as that will not solve anything either. Please lastly don't say "it can't be done" unless you can technically prove that claim.

  Read the article

• How to determine why a burned DVD won't boot?

  - by cat pants

  So I have an interesting problem where a burned DVD of "debian-7.2.0-ia64-CD-1.iso" won't boot. The DVD is a DVD+RW. I have tried erasing, burning, and booting from "debian-live-7.0.0-i386-gnome-desktop+nonfree.iso" and that works fine, but I would rather install debian 7.2 with the x86-64 architecture. After burning "debian-7.2.0-ia64-CD-1.sio", I can mount the CD as well and it appears that all the files show up correctly. I was just wondering if there is any sort of boot sector I can try inspecting on the ISO to see if perhaps it is incorrect. Thanks!

  Read the article

• fd partitions gone from 2 discs, md happy with it and resyncs. How to recover ?

  - by d0nd

  Hey gurus, need some help badly with this one. I run a server with a 6Tb md raid5 volume built over 7*1Tb disks. I've had to shut down the server lately and when it went back up, 2 out of the 7 disks used for the raid volume had lost its conf : dmesg : [ 10.184167] sda: sda1 sda2 sda3 // System disk [ 10.202072] sdb: sdb1 [ 10.210073] sdc: sdc1 [ 10.222073] sdd: sdd1 [ 10.229330] sde: sde1 [ 10.239449] sdf: sdf1 [ 11.099896] sdg: unknown partition table [ 11.255641] sdh: unknown partition table All 7 disks have same geometry and were configured alike : dmesg : Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect All 7 disks (sdb1, sdc1, sdd1, sde1, sdf1, sdg1, sdh1) were used in a md raid5 xfs volume. When booting, md, which was (obviously) out of sync kicked in and automatically started rebuilding over the 7 disks, including the two "faulty" ones; xfs tried to do some shenanigans as well: dmesg : [ 19.566941] md: md0 stopped. [ 19.817038] md: bind<sdc1> [ 19.817339] md: bind<sdd1> [ 19.817465] md: bind<sde1> [ 19.817739] md: bind<sdf1> [ 19.817917] md: bind<sdh> [ 19.818079] md: bind<sdg> [ 19.818198] md: bind<sdb1> [ 19.818248] md: md0: raid array is not clean -- starting background reconstruction [ 19.825259] raid5: device sdb1 operational as raid disk 0 [ 19.825261] raid5: device sdg operational as raid disk 6 [ 19.825262] raid5: device sdh operational as raid disk 5 [ 19.825264] raid5: device sdf1 operational as raid disk 4 [ 19.825265] raid5: device sde1 operational as raid disk 3 [ 19.825267] raid5: device sdd1 operational as raid disk 2 [ 19.825268] raid5: device sdc1 operational as raid disk 1 [ 19.825665] raid5: allocated 7334kB for md0 [ 19.825667] raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2 [ 19.825669] RAID5 conf printout: [ 19.825670] --- rd:7 wd:7 [ 19.825671] disk 0, o:1, dev:sdb1 [ 19.825672] disk 1, o:1, dev:sdc1 [ 19.825673] disk 2, o:1, dev:sdd1 [ 19.825675] disk 3, o:1, dev:sde1 [ 19.825676] disk 4, o:1, dev:sdf1 [ 19.825677] disk 5, o:1, dev:sdh [ 19.825679] disk 6, o:1, dev:sdg [ 19.899787] PM: Starting manual resume from disk [ 28.663228] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 28.663228] XFS mounting filesystem md0 [ 28.884433] md: resync of RAID array md0 [ 28.884433] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 28.884433] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 28.884433] md: using 128k window, over a total of 976759936 blocks. [ 29.025980] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 32.680486] XFS: xlog_recover_process_data: bad clientid [ 32.680495] XFS: log mount/recovery failed: error 5 [ 32.682773] XFS: log mount failed I ran fdisk and flagged sdg1 and sdh1 as fd. I tried to reassemble the array but it didnt work: no matter what was in mdadm.conf, it still uses sdg and sdh instead of sdg1 and sdh1. I checked in /dev and I see no sdg1 and and sdh1, shich explains why it wont use it. I just don't know why those partitions are gone from /dev and how to readd those... blkid : /dev/sda1: LABEL="boot" UUID="519790ae-32fe-4c15-a7f6-f1bea8139409" TYPE="ext2" /dev/sda2: TYPE="swap" /dev/sda3: LABEL="root" UUID="91390d23-ed31-4af0-917e-e599457f6155" TYPE="ext3" /dev/sdb1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdc1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdd1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sde1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdf1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdg: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdh: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" fdisk -l : Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8c878c87 Device Boot Start End Blocks Id System /dev/sda1 * 1 12 96358+ 83 Linux /dev/sda2 13 134 979965 82 Linux swap / Solaris /dev/sda3 135 4865 38001757+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc9bdc1e9 Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xcc356c30 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe87f7a3d Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb17a2d22 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8f3bce61 Device Boot Start End Blocks Id System /dev/sdg1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdh: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa98062ce Device Boot Start End Blocks Id System /dev/sdh1 1 121601 976760001 fd Linux raid autodetect I really dont know what happened nor how to recover from this mess. Needless to say the 5TB or so worth of data sitting on those disks are very valuable to me... Any idea any one? Did anybody ever experienced a similar situation or know how to recover from it ? Can someone help me? I'm really desperate... :x

  Read the article

• Error "fileid changed" when accessing files over NFS

  - by Roman Prikhodchenko

  I have an nfs-kernel-server configured and running on Ubuntu 10.04 Server. /export THIRD_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) SECOND_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) /export/ebs THIRD_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) SECOND_SERVER_IP(rw,nohide,insecure,no_subtree_check,async) I mounted the exported folder to the second server: mount -t nfs4 -o proto=tcp,port=2049 NFS_SERVER_IP_HERE:/ebs /ebs and it works just fine. I mounted it to the third server but I cannot access files from it. ls -l /ebs ls: reading directory /ebs: Stale NFS file handle total 0 The syslog on the third server says: kernel: [11575.483720] NFS: server NFS_SERVER_IP_HERE error: fileid changed kernel: [11575.483722] fsid 0:14: expected fileid 0x2, got 0x6e001 Some info: uname -r 2.6.32-312-ec2 uname -m i686

  Read the article

• /tmp/ read-only

  - by Chirag

  When I'm trying delete some of the old eaccelerator files it gives me following errors rm: cannot remove `/tmp/eaccelerator/7/2/eaccelerator-0502.02065984': Read-only file system What can I do it fix it? Filesystem Size Used Avail Use% Mounted on /dev/sda2 226G 127G 88G 60% / /dev/sdc1 227G 102G 114G 48% /disk1 /dev/sda1 99M 18M 77M 19% /boot tmpfs 4.0G 0 4.0G 0% /dev/shm /dev/sdb1 459G 182G 255G 42% /home4 /usr/tmpDSK 485M 325M 135M 71% /tmp That's my output from the server. Also what commands can I use to unmount and mount it? And should I do it while my web server is running?

  Read the article

• insert system disk error after switchting SATA cables

  - by Matthias

  I have 5 hard disks built in my computer, two connected by IDE cables, three by SATA. Today I had to return two of the SATA cables to my room mate. So I grabbed another one I had floating around and connected the remaining disk by unplugging my DVD R/W. Now I receive the 'insert system disk and press enter' error after booting. Disks and cables seem to be fine, since all the disks are recognized in the BIOS. Also, I can mount the disks using a live CD w/o problems. I also tried different orderings of the cables (i.e. plugging the disks in different plugs on the mainboard), I'm not sure if that even matters using SATA. Any Ideas what might be the problem here? The OS installed are Windows 7 and Ubuntu 10, the bootloader installed is GRUB. PS: No RAID involved, JBOD.

  Read the article

• Database modularity with EBS volumes

  - by Eclyps19

  I would like to add modularity to my websites on EC2 instances by encapsulating the site files and the mysql files in their own EBS volumes. The end result that I'm going for is the ability to quickly mount a volume or two to different servers running the same AMI (for testing/development/emergency maintenance, etc), as well as maintain separate snapshots of each. I'm able to do this fairly easily with a single database by symlinking my mounted database EBS to the appropriate places (/var/lib/mysql, /etc/my.cnf, /var/log/mysqld.log), but I'm not sure if it would even be possible be possible to have multiple databases on different EBS volumes running concurrently. Example: /website1/www.website.com /database1/ /website2/www.otherwebsite.com /database2/ Could anybody shed some light on this for me? Is it possible? Is it a bad idea? Thanks.

  Read the article

• Share files from Windows XP to Mac Snow Leopard

  - by sympleko

  Hi, I have a Windows XP desktop and a MacBook Pro on my home network. I would like to mount my "home directory" (My Documents, or whatever they call it in Windows) onto my MacBook's filesystem. So far I have been able to do this with the Shared Documents folder, using the excellent howto at Maclive. But I'd like to be able to authenticate using my Windows XP username and password, and access my files remotely without exposing them to everyone on the nextwork. Any clues or good links?

  Read the article

• Remove LCD Stand for Wall Mounting - FSM-270YG

  - by Benjamin Chambers

  Based on Jeff Atwood's post on Coding Horror, I ordered one of these monitors, and I've been absolutely loving it. However, I recently (i.e. today) took the next step in monitor-y goodness and fastened the sucker to an articulated wall mount. Unfortunately, I can't figure out how to remove the stand. The flat portion comes off with a single screw, but the leg it fastens to has no apparent method of removing it. Has anyone figured out a trick for removing these, so they don't just stick out below the screen? Should I remove the screws from the backside of the screen, and look for an internal connection to remove? Or just give up and live with it? (After all, it's a great display, it's floating in the air in front of me, and the stand leg is only a minor annoyance).

  Read the article

• Problems Installing Windows Server 2008 R2

  - by ProfKaos

  I've just finished 3 day download (with breaks) of Server 2008 R2, and am very eager to install it on my dev machine (my laptop, an HP Pavilion with a 2xTurion 64 cpu). If I mount the ISO and try and run Setup.exe, I get told Setup.exe is not a valid Win32 application. I tried burning the ISO to DVD (as files), but my machine wont't boot from DVD. If I re-insert the DVD, so that autorun comes into play, I get told something like "the setup is not valid for this version of Windows" Any suggestions as to what I might try, either to diagnose the problem, or to avoid it?

  Read the article

• Stopping local drive mappings from transfering to a RDP session

  - by Chad

  We have a SQL server that locally has about 6 physical drives mapped. However let's say G: is a mount point to the SAN, if I connect with my local machine and have a personal folder mapped locally as g:\userdata that transfers to the remote desktop session on the server overwriting the value of the 'NAME' of the share. Here is the kicker, the G: on the server still has the right information but has the wrong label coming from the share on my PC. Does anyone know how to prevent this from happening? My tick box for local resources is unchecked in my Microsoft RDP client.

  Read the article

• BIOS password and hardware clock problems

  - by Slartibartfast

  I have HP 6730b lap top. I've bought it used and installed (Gentoo) linux on it. BIOS is protected with password, and guy I bought it from said "I've tweaked BIOS from Windows program, it never asked me for password". I've tried to erase password by removing battery, but it's still there. What did get erased obviously is hw clock. This is what hapends: a) I can leave lap top in January 1980 and it works b) I can correct system time, but boot wil fail with "superblock mount time in future" from where I need to manually do fsck and continue boot c) I can correct system time and sync it with hwclock -w but than it will behave as b) and it will reset BIOS time to 1.1.1980 00:00 So I need either a way to bypass a BIOS password (wich after lot of googling seems impossible),a way to persist a clock, or a setup that will enable hw clock in eighties, system clock in present time and normal boot.

  Read the article

• Fix for OpenSolaris with no gcc vs. Nexenta with no ext3

  - by Jake Wharton

  I'm attempting to migrate my server from linux to a Solaris variant during a hardware upgrade. The machine is based around an Abit AN-M2 board which has an NForce chipset. I have what seems to be a chicken-and-egg problem of sorts: OpenSolaris 2009.06 does not recognize the NIC and I cannot compile the drivers for it as it also lacks gcc. I haven't tested as to whether or not I can mount an ext3 partition yet but its moot if there is no networking. Nexenta 3.0b3 recognizes the NIC but I cannot get the ext3 drives mounted due to FSWfspart refusing to install. I do not know much about Solaris but I wager this is due to the fact that Nexenta is based around Debian as well. While I am reusing the mobo/CPU combo, I did just spent a lot of money on the other hardware around it and would very much like to get it up and running smoothly and quickly. Does anyone have any suggestions that are not: Get a new mobo/CPU Run another OS Use alternate NIC

  Read the article

• Samba permissions on a Debian server with Fedora client

  - by norova

  I have a Debian server sharing files via Samba. I can access the files via Windows with no problems whatsoever, but when I try to mount the share on a Fedora client using the same credentials I am unable to write to any files. I have proper read access, but no write permissions. Here are the settings for the share from my smb.conf: [lampp] path = /opt/lampp writable = yes browsable = yes I have to assume that it is an issue on the Fedora side of things because accessing the share from Windows works fine. I have also tried mounting via SSHFS with no luck; it also will allow me to read files but not write. However, in Windows, using a program called WebDrive I am able to access the files (essentially via SSHFS) with no issues whatsoever. I have tried setting up NFS but not much luck there either; I'd rather just stick with Samba if possible. Any suggestions?

  Read the article

• Compress, encrypt and upload a directory to an FTP server in Linux

  - by Kristoffer L

  I want to accomplish something rather simple (at least it would seem to be): Compress a directory Encrypt the compressed file Upload the compressed & encrypted file via FTP I also want to accomplish this in an automated fashion on Linux server. TrueCrypt is not really an option in this case as it seems it can't compress a single file. Instead you have to make a volume that you mount and move the files into. This question answers how to do the the upload and I know how to compress a directory. It is just the encryption that's giving me problems.

  Read the article

• How would I put together a site requiring several TB? [closed]

  - by acidzombie24

  Lets say I have a site with unmetered 100MBPS bandwidth (i assume its bits?) and the ram i require. Most plans i see offer HDD that hold 250gb and 1TB. But what happens if i compile/generate enough data that i require 10tb or 25tb? (I'd likely have two servers but...) I wouldn't be serving all of that data (well not to the public) so CDN wouldn't make sense. What do i do in this scenario? Do I need to get a custom plan from a hosting provider? (if so how do i find them?) Are there services that allow me to mount remote drives (that sounds wrong unless its a CDN so maybe not). Are there host that deals specifically with unmetered bandwidth and provides lots of disk space? Math says ~1TB is the most i'll ever need but if i happen to need more i'd like to know my options.

  Read the article

• Can I use a Retail DVD media with an OEM key to install Windows Vista?

  - by Sammy

  I got a Fujitsu computer with OEM license key and Windows Vista. I would like to reinstall Windows on it. But I didn't get any Windows media with it. However, I do poses more than just one DVD installation disc from my Retail copies of Windows Vista that I use on other computers. Can I use this media instead? Or do I have to order a specialty OEM DVD media from the manufacturer or Microsoft? Update: I have found some partition called "EISA" configuration partition. It is a hidden partition that I found in Disk Management. How can I make use of this? Do I boot from it or do I mount it to a drive letter and access it inside Windows? Can this be used to restore the computer? It is about 11 GB in size.

  Read the article

• In *nix, how to determine which filesystem a particular file is on?

  - by smokris

  In a generic, modern unix environment (say, GNU/Linux, GNU/Solaris, or Mac OS X), is there a good way to determine which mountpoint and filesystem-type a particular absolute file path is on? I suppose I could execute the mount command and manually parse the output of that and string-compare it with my file path, but before I do that I'm wondering if there's a more elegant way. I'm developing a BASH script that makes use of extended attributes, and want to make it Do The Right Thing (to the small extent that it is possible) for a variety of filesystems and host environments.

  Read the article

• Can I force NFS automounts to use NFSv3?

  - by Steve

  I have a linux server that is exporting NFSv4 as well as NFSv3. I have a Fedora14 client that is defaulting to NFSv4 when automounting NFS shares off of the linux server, and it seems to be causing some problems. All my other linux clients on the network are mounting via NFSv3 without issue, so is there a way I can tell automount to mount the share via v3? I am pulling my automount maps via LDAP, with an entry in my /etc/auto.master file like so: +auto_master, so I assume it's a bit different than listing options with a regular automount map? (.i.e. /home --nfsvers=3 fileserver:/DATA)

  Read the article

• Clonezilla is not able to clone a RAID 1 disk

  - by Adrian

  I have a HP Server DL320 G5. There are two SATA hard disks configured as RAID 1 through HP embedded RAID controller. Server OS is running GNU/Linux (Fedora) Server booted up with clonezilla live CD. The image will be stored on a NAS connected through NFS. Clonezilla could mount the NFS share and could see the two hard disks /dev/sda and /dev/sdb. I selected /dev/sda for disk cloning. However I could not see the cloning progress and got straight into a prompt for reboot, poweroff, command line I tried to select /dev/sdb but the same issue.

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >