Search Results

Search found 3784 results on 152 pages for 'push'.

Page 75/152 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

• Is there a plugin for [Path] Finder to browse zip-archives as folders?

  - by Andrei

  Hi, I am migrating from Windows to OS X and looking for a good way to browse zip, rar etc. archives. Ideally, I need a plugin for Finder which will allow me to open archives as folders. Is there one, or any other suitable solution? Preferably free Update As I understand, most of Mac users are using Path Finder app for file management. It is an awesome program, however surprisingly it also doesn't have such functionality. I guess, the problem is in the way of thinking – my Windows-thinking is not applicable to Mac. Here are some threads for other former Windows users to push Cocoatech in a right direction: http://forum.cocoatech.com/showthread.php?t=2883 http://forum.cocoatech.com/showthread.php?t=5167

  Read the article

• Imap server woes with Android Gingerbread email and Thunderbird

  - by Mojo

  I run my own mail server and use UW's imapd/popd daemons to provide service. This week I just upgraded my OG Droid to a new Droid 3, running Android 2.3.4 (Gingerbread). The email client is much improved over the previous one. But now I have a bad interaction when I try to access email using imap from Thunderbird on a laptop or desktop. Frequently Thunderbird will stop receiving any email at all, and it will appear only on the Droid. Sometimes a Thunderbird restart will make the mail appear, but none of my "deletes" will be recorded, so when I start Thunderbird again, all my old email reappears. If I kill all of the open imap daemons and restart xinetd, I can force it to behave for maybe a session. I've tried turning off IDLE service (push email) on both sides, to no apparent avail. I've also tried installing DroidMail with the same result.

  Read the article

• ffmpeg encoding on QuadCore

  - by Gotys

  I am trying to push my server's CPU cores to the max, but no success. Encoding 2-pass style, set my "-threads" to 128 . When running 2nd pass , the CPU seems to be at 98% usage, but first pass run totally ignores "-threads" option. Using libx264 . Here is my preset: flags=+loop+mv4 cmp=256 partitions=+parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 me_method=hex subq=7 trellis=1 refs=5 bf=3 flags2=+bpyramid+wpred+mixed_refs+dct8x8 coder=1 me_range=16 g=250 keyint_min=25 sc_threshold=40 i_qfactor=0.71 qmin=10 qmax=51 qdiff=4 Is there any reason why the 1st pass is not utilizing my CPUs ? Thank you in advance! This community has always been very kind to me.

  Read the article

• ffmpeg encoding on QuadCore

  - by Gotys

  I am trying to push my server's CPU cores to the max, but no success. Encoding 2-pass style, set my "-threads" to 128 . When running 2nd pass , the CPU seems to be at 98% usage, but first pass run totally ignores "-threads" option. Using libx264 . Here is my preset: flags=+loop+mv4 cmp=256 partitions=+parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 me_method=hex subq=7 trellis=1 refs=5 bf=3 flags2=+bpyramid+wpred+mixed_refs+dct8x8 coder=1 me_range=16 g=250 keyint_min=25 sc_threshold=40 i_qfactor=0.71 qmin=10 qmax=51 qdiff=4 Is there any reason why the 1st pass is not utilizing my CPUs ? Thank you in advance! This community has always been very kind to me.

  Read the article

• Fujitsu Siemens V6535 laptop doesn't wake up - crash when going into standby?

  - by marc

  I'm having trouble with my laptop (Fujitsu Siemens model V6535). It runs Windows 7, and after I upgraded from Vista I've noticed something that makes me really angry. When my laptop goes into Standby, the power LED changes to red and starts blinking (standby mode). When I push the power button to wake it up it, the blinking LED changes to green but nothing else happens. Nothing on the display, no HDD sound. When I press the power button for a few seconds and then try turn it on again, it doesn't display anything. I have to unplug the charger, shut it off, and power it on again without the power cable. Then it starts working. A few days ago I upgraded the BIOS to the newest version, but it doesn't help. Does anyone have any idea what can be wrong?

  Read the article

• Help on Removal of Dynamically Created sprites.

  - by Brrr Ice Tea

  import flash.display.Sprite; import flash.net.URLLoader; var index:int = 0; var constY = 291; var constW = 2; var constH = 40; hydrogenBtn.label = "Hydrogen"; heliumBtn.label = "Helium"; lithiumBtn.label = "Lithium"; hydrogenBtn.addEventListener (MouseEvent.CLICK, loadHydrogen); heliumBtn.addEventListener (MouseEvent.CLICK, loadHelium); lithiumBtn.addEventListener (MouseEvent.CLICK, loadLithium); var myTextLoader:URLLoader = new URLLoader(); myTextLoader.addEventListener(Event.COMPLETE, onLoaded); function loadHydrogen (event:Event):void { myTextLoader.load(new URLRequest("hydrogen.txt")); } function loadHelium (event:Event):void { myTextLoader.load(new URLRequest("helium.txt")); } function loadLithium (event:Event):void { myTextLoader.load(new URLRequest("lithium.txt")); } var DataSet:Array = new Array(); var valueRead1:String; var valueRead2:String; function onLoaded(event:Event):void { var rawData:String = event.target.data; for(var i:int = 0; i<rawData.length; i++){ var commaIndex = rawData.search(","); valueRead1 = rawData.substr(0,commaIndex); rawData = rawData.substr(commaIndex+1, rawData.length+1); DataSet.push(valueRead1); commaIndex = rawData.search(","); if(commaIndex == -1) {commaIndex = rawData.length+1;} valueRead2 = rawData.substr(0,commaIndex); rawData = rawData.substr(commaIndex+1, rawData.length+1); DataSet.push(valueRead2); } generateMask_Emission(DataSet); } function generateMask_Emission(dataArray:Array):void{ var spriteName:String = "Mask"+index; trace(spriteName); this[spriteName] = new Sprite(); for (var i:int=0; i<dataArray.length; i+=2){ this[spriteName].graphics.beginFill(0x000000, dataArray[i+1]); this[spriteName].graphics.drawRect(dataArray[i],constY,constW, constH); this[spriteName].graphics.endFill(); } addChild(this[spriteName]); index++; } Hi, I am relatively new to flash and action script as well and I am having a problem getting the sprite to be removed after another is called. I am making emission spectrum's of 3 elements by dynamically generating the mask over a picture on the stage. Everything works perfectly fine with the code I have right now except the sprites stack on top of each other and I end up with bold lines all over my picture instead of a new set of lines each time i press a button. I have tried using try/catch to remove the sprites and I have also rearranged the entire code from what is seen here to make 3 seperate entities (hoping I could remove them if they were seperate variables) instead of 2 functions that handle the whole process. I have tried everything to the extent of my knowledge (which is pretty minimal @ this point) any suggestions? Thanks ahead of time!

  Read the article

• jquery dynamic select doesn't submit values

  - by n00b0101

  I have a form that includes three select boxes. The first one is categories, and selecting a category from it will populate the variables multi-select box with values specific to the selected category. Selecting variables and then clicking "add selected" will populate the target select box will those variables. The problem is, print_r shows that the values in the target select box aren't passed upon submit, and I don't understand why... Below is the code, and help is really appreciated Here's the html markup: <select multiple="" id="categories" name="categories[]"> <option class="category" value="Income">Income</option> <option class="category" value="Gender">Gender</option> <option class="category" value="Age">Age</option> </select> //note that i'm only showing variables for a presumably select category <select multiple="multiple" id="variables" name="variables[]"> <option value="2">Less Than $15,000</option> <option value="3">$15,000 - $19,999</option> <option value="4">$20,000 - $29,999</option> <option value="5">$30,000 - $39,999</option> <option value="6">$40,000 - $49,999</option> <option value="11">$90,000 - $99,999</option> <option value="12">$100,000 - $124,999</option> <option value="13">$125,000 - $149,999</option> <option value="14">Greater than $149,999</option> </select> <select name="target[]" id="target" multiple="multiple" height="60"> </select> And here's the jquery code: $(function(){ var opts = {}, $cats = $("#categories"), $target = $("#target"), $vars = $("#variables"); $vars.find("option").each(function(){ var $opt = $(this), cat = this.className, value = this.value, label = $opt.text(); if(!opts[cat]) { opts[cat] = []; } opts[cat].push({label: label, value: value}); $opt.remove(); }); function update_variables(){ var cat = $cats.val(), new_opts = []; $vars.empty(); $.each(opts[cat], function(){ if( $target.find('[value=' + this.value + ']').length === 0 ){ new_opts.push(option(this.value, this.label)); } }); $vars.html(new_opts.join('')); } function option(value, label){ return "<option value='" + value + "'>" + label + "</option>"; } $("#add").click(function(e){ e.preventDefault(); $vars.find(':selected').appendTo($target).attr('selected',false); update_variables(); }); $("#remove").click(function(e){ e.preventDefault(); $target.find(':selected').remove(); update_variables(); }); $cats.change(function(){ update_variables(); }).change(); })

  Read the article

• Active Directory - Using GPO To Update Multiple Versions Of .NET

  - by Joe Wilson

  OK, I have searched everywhere for this one. I have all the MSI's and packages I need to deploy .Net 3.5 SP1, and 2.0 and 3.0 (which are prerequisites for 3.5). I can't figure out how to install all of them at once via GPO. Basically, the computers on the network do NOT have any version of .Net installed, and I need them to be at 3.5 SP1. I know I can deploy each version via GPO, force reboot the client, then push the next one, force reboot, and so on. Is there a way to streamline install all 3 at once via GPO? Thanks

  Read the article

• Why is rsync.exe [cwRsync] trying to open a port when in client mode?

  - by hemancuso

  I'm trying to use a cygwin compiled version of rsync [the cwrsync package] on Windows and in seemingly whatever configuration I test in there is a request to the user presented by Windows Firewall to allow inbound traffic. If you deny this request, everything works fine - as expected. I'm doing a vanilla push rsync.exe localpath user@remotepath:/absolutepath and it works just fine. I've also attempted this command having deleted ssh from the path and using rsync on local paths - still a firewall prompt. Why is this listen() happening and is there a way I can force the client to not attempt to listen without recompiling and maintaing a patch?

  Read the article

• Disable mouse hotkeys in Chrome

  - by John Ruiz

  Does anyone know how I can get Chrome to stop using my mouse buttons as hotkeys for a Logitech MX518 gaming mouse? I have the mouse driver and software suite (SetPoint) installed. Unfortunately, SetPoint does not provide per-application settings, so that route is not an option. No matter what I do in SetPoint, Chrome captures my side mouse buttons and uses them as a forward/back hotkey. I want to turn this off because I use those buttons for my push-to-talk in Mumble/Ventrilo. Any idea how I can do this? edit: my set-point does not have a way to create per-application settings.

  Read the article

• Lockless queue implementation ends up having a loop under stress

  - by Fozi

  I have lockless queues written in C in form of a linked list that contains requests from several threads posted to and handled in a single thread. After a few hours of stress I end up having the last request's next pointer pointing to itself, which creates an endless loop and locks up the handling thread. The application runs (and fails) on both Linux and Windows. I'm debugging on Windows, where my COMPARE_EXCHANGE_PTR maps to InterlockedCompareExchangePointer. This is the code that pushes a request to the head of the list, and is called from several threads: void push_request(struct request * volatile * root, struct request * request) { assert(request); do { request->next = *root; } while(COMPARE_EXCHANGE_PTR(root, request, request->next) != request->next); } This is the code that gets a request from the end of the list, and is only called by a single thread that is handling them: struct request * pop_request(struct request * volatile * root) { struct request * volatile * p; struct request * request; do { p = root; while(*p && (*p)->next) p = &(*p)->next; // <- loops here request = *p; } while(COMPARE_EXCHANGE_PTR(p, NULL, request) != request); assert(request->next == NULL); return request; } Note that I'm not using a tail pointer because I wanted to avoid the complication of having to deal with the tail pointer in push_request. However I suspect that the problem might be in the way I find the end of the list. There are several places that push a request into the queue, but they all look generaly like this: // device->requests is defined as struct request * volatile requests; struct request * request = malloc(sizeof(struct request)); if(request) { // fill out request fields push_request(&device->requests, request); sem_post(device->request_sem); } The code that handles the request is doing more than that, but in essence does this in a loop: if(sem_wait_timeout(device->request_sem, timeout) == sem_success) { struct request * request = pop_request(&device->requests); // handle request free(request); } I also just added a function that is checking the list for duplicates before and after each operation, but I'm afraid that this check will change the timing so that I will never encounter the point where it fails. (I'm waiting for it to break as I'm writing this.) When I break the hanging program the handler thread loops in pop_request at the marked position. I have a valid list of one or more requests and the last one's next pointer points to itself. The request queues are usually short, I've never seen more then 10, and only 1 and 3 the two times I could take a look at this failure in the debugger. I thought this through as much as I could and I came to the conclusion that I should never be able to end up with a loop in my list unless I push the same request twice. I'm quite sure that this never happens. I'm also fairly sure (although not completely) that it's not the ABA problem. I know that I might pop more than one request at the same time, but I believe this is irrelevant here, and I've never seen it happening. (I'll fix this as well) I thought long and hard about how I can break my function, but I don't see a way to end up with a loop. So the question is: Can someone see a way how this can break? Can someone prove that this can not? Eventually I will solve this (maybe by using a tail pointer or some other solution - locking would be a problem because the threads that post should not be locked, I do have a RW lock at hand though) but I would like to make sure that changing the list actually solves my problem (as opposed to makes it just less likely because of different timing).

  Read the article

• Help with OpenVPN setup on Windows Server 2003

  - by Bill Johnson

  Hi all, Just wondering if someone can assist me further with the set-up of OpenVPN on my Windows Server 2003. I have configured Win Server as per the following guide: http://tinyurl.com/kxusv and I'm now at the stage of Creating the config files. I have a few questions that I need some assistance with. My server IP is 192.168.1.10 and my routers IP address is 192.168.1.1 (the router is a Netgear DGN2000). I have edited the server.ovpn file as per the following: push "dhcp-option DNS X.X.X.X" # Replace the Xs with the IP address of the DNS for your home network (usually your ISP's DNS) push "dhcp-option DNS X.X.X.X" # A second DNS server if you have one to include my ISP DNS and I have not edited anything else. Now my issue is with the client1.opvpn file as per the below: client dev tap #dev-node MyTAP #If you renamed your TAP interface or have more than one TAP interface then remove the # at the beginning and change "MyTAP" to its name proto udp remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.crt" # Change the next two lines to match the files in the keys directory. This should be be different for each client. key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.key" # This file should be kept secret ns-cert-type server cipher BF-CBC # Blowfish (default) encrytion comp-lzo verb 1 To me it looks like I will need to amend the following: remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 So, should the first line be the static IP of the machine that I'm applying this to? The IP address of the server (192.168.1.10) or something else? I'm also stuck on the second part 'route 192.168.1.0 255.255.255.0 vpn_gateway 3' Should this be the router IP which is 192.168.1.1 and the subnet is 255.255.255.0 and that is all I need to alter? The final part that I'm stuggling with is Configuring the router. Basically I have a Netgear DGN2000 and as it mentions that the router should be configured to port forward port 1194 to the server’s IP address of 192.168.1.150 all I have been able to do is in 'Firewall Rules' and on 'Inbound Services', set the Service to 'Any(ALL) and Send to LAN Server point to 1923.168.1.150. I'm not sure if this is correct? It is the following stage of the help guide that I'm struggling with and really need some help with: You need to make sure the port you configured OpenVPN to listen on is forwarded on the router to the IP address of your server. On the WRT54G, port forwarding is configured in the “Applications & Gaming” section. Enter 1194 for the port, UDP for the protocol, and 192.168.1.150 for the IP address. Make sure the entry is enabled and then save the setting. Next, you need to add an entry to the router’s Routing Table. This will enable the router to properly route requests from the clients to the TAP interface of the server. On the WRT54G you would go to the “Setup” page and then the “Advanced Routing” section. Enter the follwing info to make the entry: Enter Route Name: openVPN Destination LAN IP: 192.168.10.0 Subnet Mask: 255.255.255.252 Default Gateway: 192.168.1.150 Interface: LAN & Wireless Once the info has been typed in make sure you save the setting. Can anyone possibly guide me through setting this part up with my Netgear router. I see that once I have these 2 parts complete I'm there so I would really appreciate someone walking me through what is required in completing this. Much appreciated.

  Read the article

• Removing google mail markers with jquery after getting them from xml

  - by sebastian

  Hi there, I'm trying to create a page that contains a google map. The map is filled with markers from an xml file. I just can't figure out how to remove "old" markers, that don't match the latest user input. At the moment my js stops after the very first xml item. The clearList.push(marker); is supposed to put the generated marker away for later usage. When the user hits the search button I want all markers to be gone and use clearMarkers();. Maybe someone here can help Sebastian Here is my JavaScript: $(document).ready(function() { $("#map").css({height: 650}); var clearList = []; var myLatLng = new google.maps.LatLng(52.518143, 13.372879); MYMAP.init('#map', myLatLng, 11); $("#showmarkers").click(function(e){ clearMarkers(); MYMAP.placeMarkers('markers.xml'); }); }); function clearMarkers() { $(clearList).each(function () { this.setmap(null); }); clearList = []; } var MYMAP = { map: null, bounds: null } MYMAP.init = function(selector, latLng, zoom) { var myOptions = { zoom:zoom, center: latLng, mapTypeId: google.maps.MapTypeId.HYBRID } this.map = new google.maps.Map($(selector)[0], myOptions); this.bounds = new google.maps.LatLngBounds(); } MYMAP.placeMarkers = function(filename) { $.get(filename, function(xml){ $(xml).find("marker").each(function(){ // read values from xml for searching var platzart = $(this).find('platzart').text(); var ort = $(this).find('ort').text(); var open = $(this).find('open').text(); if (platzart =="Kunstrasen" && $('#kunstrasen').attr('checked') || platzart =="Rasen" && $('#rasen').attr('checked') || platzart =="Tartan" && $('#tartan').attr('checked') || platzart =="Boltzplatz" && $('#boltzplatz').attr('checked') ){ // read values from xml for additional info var name = $(this).find('name').text(); var plz = $(this).find('plz').text(); var note = $(this).find('note').text(); var adress = $(this).find('adress').text(); // create a new LatLng point for the marker var lat = $(this).find('lat').text(); var lng = $(this).find('lng').text(); var point = new google.maps.LatLng(parseFloat(lat),parseFloat(lng)); // extend the bounds to include the new point MYMAP.bounds.extend(point); // create new marker var marker = new google.maps.Marker({ position: point, map: MYMAP.map }); clearList.push(marker); // add onclick overlay var infoWindow = new google.maps.InfoWindow(); var html='<strong>'+name+'</strong.><br />'+platzart; google.maps.event.addListener(marker, 'click', function() { infoWindow.setContent(html); infoWindow.open(MYMAP.map, marker); }); } MYMAP.map.fitBounds(MYMAP.bounds); }); }); } Thanks in advance

  Read the article

• How to set up Aptana Studio 3 with a Bitbucket private repo

  - by Titus

  I have just started playing around with Git and would like to push a personal project to a newly created, private repo on Bitbucket using Aptana Studio 3. I tried to use the Git integration in Aptana but I couldn't figure out where to enter my username and password for Bitbucket anywhere. I tried using the Team > Share Project context menu but that keeps throwing the following message: Warning: Permanently added the RSA host key for IP address '207.223.240.181' to the list of known hosts. Permission denied (publickey). fatal: The remote end hung up unexpectedly I'm pretty sure that's because my repo is private. However, I couldn't find a provision to provide any form of credentials for linking to a private repo. Any ideas?

  Read the article

• Problems with Black Box KVM

  - by MrWizard54

  I just recieved a shipment of equipment orderd by my predicessor that includes brand new Dell Optiplex 990 computers, with standard mice and keyboards. Also included were Black Box ServSwitch Secure KVMs. I've worked with KVMs before and hypothetically they should be the easiest thing in the world to deal with, plug it all together, push the button, go. However, for the life of me I can't get the computers to recognize the mouse or keyboard when plugged into the KVM. We've seen this with multiple KVMs across the order. Any one know what I'm missing? Computers are all Dell 990 with Windows 7.

  Read the article

• OpenVPN - client-to-client traffic working in one direction but not the other

  - by Pawz

  I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

  Read the article

• Creating different margins on the first page of a word template

  - by Paul

  I have a letterhead template and I need the first page left margin to be larger than subsequent pages. I've seen the option of placing a text box or image box in the header to push the text but this ends up throwing off the tabs and bullet list indentation markers. I thought of setting up the first page using two columns and pushing the text to start on the second column but I can't seem to find a way to get the text to switch back to 1 column on the second page when it is created from text overflowing. Does anyone know how something like this is possible? Thanks in advance, Paul

  Read the article

• No display but video card fans spins

  - by Marc

  Since I moved my computer there's no display when I plug my screen in the video card but works fine in the mother board. I tried reseting the cmos, but I still have the same problem. The fans are spining and there's a light from the card. I tried the DVI ports and the HDMI Here's my build. I have it for 2 months and everything was working fine. Do you think it's the video card? Asus p8z68-v pro gen3 Intel i7 2600k 120 GB OCZ Agility 3 16 GB RAM Blue Corsair DDR3 Asus GTX 570 H80 Corsair liquid cooling XFX PRO750W 80Plus bronze power supply EDIT That's why And I can't push more cause the card is on this Thank you everyone! I fixed it by pushing the mobo from the other side of the case and now it fits.

  Read the article

• Mercurial changeset hook problem when auto updating. Server permissions maybe??

  - by Gary Willoughby

  I am using Mercurial SCM over a LAN using a normal shared folder instead of http and i'm having a problem getting the auto update hook to run. I have entered this hook as detailed here: http://mercurial.selenic.com/wiki/FAQ#FAQ.2BAC8-CommonProblems.Any_way_to_.27hg_push.27_and_have_an_automatic_.27hg_update.27_on_the_remote_server.3F This installs the hook, but when i push something to the remote repo i get an error: added 1 changesets with 1 changes to 1 files running hook changegroup: hg update >&2 warning: changegroup hook exited with status -1 There is a stackoverflow question similar to this here: http://stackoverflow.com/questions/2885246/mercurial-auto-update-problem but it offers no solutions other than it may be a permissions error somewhere. Has anyone else had this problem and can anyone else shed any more light on this or give me a heads up on where to start fixing this? Thanks.

  Read the article

• cluster of services and restarting on package upgrade

  - by Marcin Cylke

  I'm using puppet to manage a bunch of servers. Those servers run a simple service - exposed to the world via load balancer. That service's instances are independent in that they can run on their own, are are deployed on multiple servers to increase responsiveness. Now, when I push a new package to repo and puppet catches up with it appearing there it just updates this package on all services. This results in a short downtime of entire service. Is there a way of configuring puppet to do restart the services sequentially? Or using any other kind of strategy?

  Read the article

• is Boost Library's weighted median broken?

  - by user624188

  I confess that I am no expert in C++. I am looking for a fast way to compute weighted median, which Boost seemed to have. But it seems I am not able to make it work. #include <iostream> #include <boost/accumulators/accumulators.hpp> #include <boost/accumulators/statistics/stats.hpp> #include <boost/accumulators/statistics/median.hpp> #include <boost/accumulators/statistics/weighted_median.hpp> using namespace boost::accumulators; int main() { // Define an accumulator set accumulator_set<double, stats<tag::median > > acc1; accumulator_set<double, stats<tag::median >, float> acc2; // push in some data ... acc1(0.1); acc1(0.2); acc1(0.3); acc1(0.4); acc1(0.5); acc1(0.6); acc2(0.1, weight=0.); acc2(0.2, weight=0.); acc2(0.3, weight=0.); acc2(0.4, weight=1.); acc2(0.5, weight=1.); acc2(0.6, weight=1.); // Display the results ... std::cout << " Median: " << median(acc1) << std::endl; std::cout << "Weighted Median: " << median(acc2) << std::endl; return 0; } produces the following output, which is clearly wrong. Median: 0.3 Weighted Median: 0.3 Am I doing something wrong? Any help will be greatly appreciated. * however, the weighted sum works correctly * @glowcoder: The weighted sum works perfectly fine like this. #include <iostream> #include <boost/accumulators/accumulators.hpp> #include <boost/accumulators/statistics/stats.hpp> #include <boost/accumulators/statistics/sum.hpp> #include <boost/accumulators/statistics/weighted_sum.hpp> using namespace boost::accumulators; int main() { // Define an accumulator set accumulator_set<double, stats<tag::sum > > acc1; accumulator_set<double, stats<tag::sum >, float> acc2; // accumulator_set<double, stats<tag::median >, float> acc2; // push in some data ... acc1(0.1); acc1(0.2); acc1(0.3); acc1(0.4); acc1(0.5); acc1(0.6); acc2(0.1, weight=0.); acc2(0.2, weight=0.); acc2(0.3, weight=0.); acc2(0.4, weight=1.); acc2(0.5, weight=1.); acc2(0.6, weight=1.); // Display the results ... std::cout << " Median: " << sum(acc1) << std::endl; std::cout << "Weighted Median: " << sum(acc2) << std::endl; return 0; } and the result is Sum: 2.1 Weighted Sum: 1.5

  Read the article

• Corrupted network from ipad

  - by lisa

  All wireless clients were kicked off the network (3 PCs & 1 iPad). Only a PC with a wired connection was still able to connect. This morning I discovered that the network had been renamed and a new password had been assigned. Via Linksys Updater I gave a new password. Strangely, in my Windows Control Panel/Network connections our old password now exists as an unsecured network, that I cannot delete! When I attempt to connect using this bastard network, I get an Apple Push error. Linksys WRT610N PCs all using Windows 7 (wired & wireless) iPad 2

  Read the article

• Is there a way to automate testing for a GNS3 network topology?

  - by Chedy2149

  I'm working on an MPLS backbone topology using GNS3, this topology includes configuration of several networking technologies such as IPv6, BGP, OSPF, IPv6 to IPv4 dynamic tunneling, MPLS based VPNs, MPLS based traffic engineering... So I'm a beginner with basic knowledge in networking (Ipv4 addressing, basic routing and switching) and I can't just easly test if my topology works or not, moreover fiddling with configuration I've noticed that sometimes when getting MPLS config right and missing BGP config all my topology is messed up. Given that I use Cisco 7200 series routers, is there any way to build a test harness for my topology in order to guarentee correctness with a single push button automated process?

  Read the article

• Automatically reboot Windows8 if no internet activity [migrated]

  - by Patrick

  I have a media server located in a very inconvenient part of my house. Occasionally I will have to reset my router or it will reset itself. The issue is the PC loses connectivity for some reason, and I am forced to walk outside, around the house, into the basement, over a bunch of toys and weights and boxes, to push a button to reboot it. I would love to have it check itself every 5-10 minutes and auto reboot if it is unable to ping a given address/IP. Any ideas how to accomplish this?

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >