Search Results

Search found 2945 results on 118 pages for 'reverse tunnel'.

Page 75/118 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

  • How to securely enable file sharing over PPTP on Windows 2008 Server

    - by Damage
    I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

    Read the article

  • Cisco SR520w FE - WAN Port Stops Working

    - by Mike Hanley
    I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

    Read the article

  • How do i remove a password expiration policy?

    - by jimmygee
    We had a password expiration policy recently removed from our AD but some users continued to get the "..your password will expire in x days. would you like to change it now?" message. So we added a reverse/undo policy to correct the local registry settings Maximum password age = 0 days Minimum password age = 0 days This hasn't worked as new users still seem to encounter the above "change password" message sporadically. We have now removed all custom password policy GPOs and are left with the "Default Domain Policy". Still no good. Can someone point me in the direction to fix this? And an explanation into what i was doing wrong (/how password expiration policies apply) would be useful too. thanks Environment is 2k3 server with mostly XPsp2 clients.

    Read the article

  • Keeping local windows folder in sync with remote ftp folder in real time

    - by bobo
    I know it has been asked before, but I would like it to happen in real time and transparently (without the need to open a separate FTP client such as FileZilla). For example, if I edit a text file in the local folder and then save it, it should immediately detect it and push the changes to the remote folder. It can be unidirectional (changes made on the local folder has to be pushed to the remote folder but the reverse is not necessary). It should also be able to specify some excluded files/folders which do not need to be in sync. Is there such an application that you know of?

    Read the article

  • Yahoo flagging mail as spam when using relay server

    - by modulaaron
    I'm using Postfix to relay mail from my site to my mail server. Mail is received properly at my Gmail and Hotmail accounts - only Yahoo is the problem. The Yahoo mail headers state: Received-SPF: none (mta1133.mail.mud.yahoo.com: domain of [email protected] does not designate permitted sender hosts) In contrast, the Gmail headers state: Received-SPF: pass (google.com: domain of [email protected] designates 74.50.xxx.xxx as permitted sender) client-ip=74.50.xxx.xxx; Reverse DNS is set up correctly, as is my SPF record and domainkeys/dkim (both domainkeys and dkim show pass(ok) in the Yahoo mail headers). Does anyone have any suggestions as to what I can do to solve the Yahoo problem (short of contacting Yahoo, as this is a brand new mail server)? Thanks

    Read the article

  • best practice to removing DC from Site that no longer connects via vpn in another city

    - by dasko
    hi i am looking for a recap of what i have done already to see if i missed anything. i had two cities connected by wan using a ipsec persistent tunnel between gateways. i had one DC (DOMAIN CONTROLLER) in each city that was a global catalog server (GC) they were set up to replicate and i had them configured under Sites and Servers with their own subnet etc... about 6 months ago the one city was removed and i was not able to gracefully remove, through dcpromo, the server that was there. it is no longer used and cannot be brought back. the company went from two sites down to single site. Problem is i had a whole bunch of kcc errors and replication bugs in the event viewer. i wanted to clean up my active directory and decided to use the ntdsutil metadata cleanup commands. i removed the server from the specifed site based on a procedure from petri website. I then removed the instances of the old DC and site from Sites and Servers. Then i went and cleaned up the DNS by removing Host A records, NS server name from both the local DNS forward lookup zone and the _msdcs i also removed the reverse lookup zone for the subnet that no longer exists. is there anything i missed? thanks in advance for any help. gd

    Read the article

  • Problem with shared ssh keys

    - by warren
    Following the process I've used in other environments (http://www.trilug.org/pipermail/trilug/Week-of-Mon-20080602/054712.html), I've tried setting-up shared keys between my Mac and my CentOS 4 webserver. I've seen the same problem with my older Ubuntu 7.10 workstation trying to connect via keys to the same webserver. I have tried both dsa and rsa keytypes (sshkeygen -t <type>). The sshd_config file on my webserver seems to be allowing key-based logins: RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys And my .ssh/authorized_keys has my dsa and rsa keys added. Where should I be looking for what to change next to make key-based logins "Just Work™"? Is it related to the line #UseDNS yes and sshd is trying to do a reverse-lookup on my IP, but cannot because it's NAT'd?

    Read the article

  • possible SYN flooding on port 80. Sending cookies

    - by Sparsh Gupta
    I recently had a server downtime. I looked everywhere and the only thing I found in my log files is: Feb 17 18:58:04 localhost kernel: possible SYN flooding on port 80. Sending cookies. Feb 17 18:59:33 localhost kernel: possible SYN flooding on port 80. Sending cookies. Can someone give me more information about it. WHat is it, How can I debug the cause and how can I fix the same. I also posted ipconntrack suddenly became toooo large which has another data point I found unusual, wondering if the two things is connected as they occured exactly at the same time but at different servers. One at reverse proxy and other at actual backend Varnish server) Thanks

    Read the article

  • Apache internal test servers

    - by user74274
    I want to build a test system in the office. On one box I will install XAMPP. I will put a website that I want to test on that box. Now I do not want it connected to the Internet. So my plan is to use a reverse proxy to resolve things like ads and other external links. So I am thinking of using mod_proxy for that. Now my question is, How many boxes do I need? 1 for Xampp, 1 for mod_proxy and 1 for the server where mod proxy redirects them to. Total of three. But maybe I could do it with less. Can I run Mod_proxy on the first box? Is there a better way? Thanks

    Read the article

  • Inexpensive Remote Assistance software?

    - by Jess
    Any recommendations for Remote Assistance software that does not require firewall modification for clients? To assist client with software problems and perform training, we currently use a tool called Remote Helpdesk to connect to their computers and guide them through the process. This tool was pretty cheap (~$400 onetime for 3 support staff), and worked great - the client's PC actually initiates the connection to us, so there's never any firewall issues (vs. Remote Desktop, VNC software, or many other similar tools). Unfortunately, the product doesn't work well with 64-bit O/S's and Vista in general (slows down by a factor of 10 or so). I am looking for alternatives that provide the same reverse connection capabilities to avoid firewall issues. The only solution I've found is WebEx's Remote Support, which is WAY too expensive ($449/month for us). Thanks for all the assistance!

    Read the article

  • Windows Server 2008 DHCP with RRAS

    - by Guillermo Prandi
    I have a Windows Server 2008 R2 which is a member of a domain, but is placed in a remote location. The server is directly connected to Internet. Clients need to access a particular insecure TCP service in this server (ports 9730 and 9731). Since clients have dynamic IP addresses I cannot know in advance, I thought it would be nice to have them connected through a VPN in order to access the insecure service, but ONLY to access that service, like this: Client ------> VPN TUNNEL ------> (Insecure service at Server) | \----> (Normal internet access) I'd enable the insecure ports in the firewall only from VPN accesses. For this I configured RRAS in the server and gave it a static IP address range (172.19.1.2 through 172.19.1.254) to serve the clients. First I thought I could use DHCP to assign the addresses, but I cannot use DHCP in my LAN connection (not allowed by the hosting service). I tried configuring DHCP binding it to a Microsoft Loopback Adapter, but that's not supported as a DHCP source by RRAS. What I want to accomplish is to send specific DHCP options to the client (network mask, routing table, etc.). In particular: Prevent the client from having the server as default router (without changing the client's "use default gateway in remote network"). Have it as a route for the server's internal RRAS address only (172.19.1.1). Prevent the client from using a 255.255.0.0 mask for the 172.19.x.x network (a 255.255.255.0 mask would be better). Can I do that with RRAS only? How? Currently, the only solution I can think of is to use DHCP in the LAN adapter, but filter DHCP packets so they don't reach the provider's network. However, I'm not sure if that will work. Any suggestions are welcomed! Guille

    Read the article

  • Configure IPv6 routing

    - by godlark
    I've got IPv6 addresses from SIXXS. My host is connected with SIXXS network over a AICCU tunnel ("sixxs" interface). My host address is 2001:::2, the host on the end has address 2001:::1. On my host IPv6 is fully accessible. I have problem with configuring IPv6 network on VMs. I use VirtualBox, the VM (Ubuntu) uses tap1 (on the host bridged by br0) #!/bin/sh PATH=/sbin:/usr/bin:/bin:/usr/bin:/usr/sbin # create a tap tunctl -t tap1 ip link set up dev tap1 # create the bridge brctl addbr br0 brctl addif br0 tap1 # set the IP address and routing ip link set up dev br0 ip -6 route del 2001:6a0:200:172::/64 dev sixxs ip -6 route add 2001:6a0:200:172::1 dev sixxs ip -6 addr add 2001:6a0:200:172::2/64 dev br0 ip -6 route add 2001:6a0:200:172::2/64 dev br0 Host: routing table: 2001:6a0:200:172::1 dev sixxs metric 1024 2001:6a0:200:172::/64 dev br0 proto kernel metric 256 2001:6a0:200:172::/64 dev br0 metric 1024 2000::/3 dev sixxs metric 1024 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev sixxs proto kernel metric 256 fe80::/64 dev br0 proto kernel metric 256 fe80::/64 dev tap1 proto kernel metric 256 default via 2001:6a0:200:172::1 dev sixxs metric 1024 Guest: interface eth1 (it is connected with tap1): auto eth1 iface eth1 inet6 static address 2001:6a0:200:172::3 netmask 64 gateway 2001:6a0:200:172::2 Guest: routing table 2001:6a0:200:172::/64 dev eth1 proto kernel metric 256 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev eth1 proto kernel metric 256 default via 2001:6a0:200:172::2 dev eth1 metric 1024 The guest pings to the host, the host pings to the guest, the host pings to 2001:6a0:200:172::1, but the guest doesn't ping to 2001:6a0:200:172::1. The guest tries to ping, on the host (by tcdump) I can capture its packets, but the host doesn't send them to 2001:6a0:200:172::1. What have I missed in configuration?

    Read the article

  • Yahoo flagging mail as spam when using relay server

    - by modulaaron
    I'm using Postfix to relay mail from my site to my mail server. Mail is received properly at my Gmail and Hotmail accounts - only Yahoo is the problem. The Yahoo mail headers state: Received-SPF: none (mta1133.mail.mud.yahoo.com: domain of [email protected] does not designate permitted sender hosts) In contrast, the Gmail headers state: Received-SPF: pass (google.com: domain of [email protected] designates 74.50.xxx.xxx as permitted sender) client-ip=74.50.xxx.xxx; Reverse DNS is set up correctly, as is my SPF record. Does anyone have any suggestions as to what I can do to solve the Yahoo problem (short of contacting Yahoo, as this is a brand new mail server)? FYI - domainkeys are on the origin server and are showing as passed. Thanks

    Read the article

  • Snort/Barnyard2 Logging

    - by Eric
    I need some help with my Snort/Barnyard2 setup. My goal is to have Snort send unified2 logs to Barnyard2 and then have Barnyard2 send the data to other locations. Here is my currrent setup. OS Scientific Linux 6 Snort Version 2.9.2.3 Barnyard2 Version 2.1.9 Snort command snort -c /etc/snort/snort.conf -i eth2 & Barnyard2 command /usr/local/bin/barnyard2 -c /etc/snort/barnyard2.conf -d /var/log/snort -f snort.log -w /var/log/snort/barnyard.waldo & snort.conf output unified2: filename snort.log, limit 128 barnyard2.conf output alert_syslog: host=127.0.0.1 output database: log, mysql, user=snort dbname=snort password=password host=localhost With this setup, barnyard2 is showing all of the correct information in the database and I'm using BASE to view it on the web GUI. I was hoping to be able to send the full packet data to syslog with barnyard2 but after reading around, it seems that it is impossible to do that. So I then started trying to modify the snort.conf file and add lines like "output alert_full: alert.full". This definitely gave me a lot more information but still not the full packet data like I want. So my question is, is there anyway I can use barnyard2 to send the full packet data of alerts to a human readable file? Since I can't send it directly to syslog, I can create another process to take the data from that file and ship it off to another server. If not, what flags and/or snort.conf configuration would you recommend to get the most data possible but still be able to handle quite a bit of traffic? In the end of it all, these alerts will be shipped to a central server via a SSH tunnel. I'm trying to stay away from databases.

    Read the article

  • nTop RRD file architecture

    - by Seanny123
    I have a gig of nTop RRD files and I would like to start graphing them with rrdtool (but not with nTop, since I'm hoping to do this with a separate backup of the database as workaround to the impossibility of limiting the RRD files by size), but I don't know how the files are structured. I've tried reading the RRD documentation from SourceForge and the nTop FAQ, but I'm not finding the information I need. Does anyone know of any documentation I should be looking at or how the files are structured? Here https://dl.dropbox.com/u/669437/file%20structure.png is a screenshot of the file structure. At first I thought it was organized by IP address (so the rrd files for address 1.1.2.3 would be stored in folder 1-1-2-3 or even the reverse order), but that doesn't seem to be the case. It isn't organized by MAC address either, although some hosts are saved that way. Any help would be appreciated.

    Read the article

  • Need a new mouse: clicky scroll wheel and additional thumb-operated scroll wheel

    - by cksubs
    I'm having some carpel tunnel syndrome or RSI issues, and I need to get a new mouse. I've tried a friend's Logitech MX Revolution and it's almost perfect. I LOVE the thumb-operated scroll wheel, and I think that that alone would solve many of my hand pain issues. The problem is that it uses their newfangled smooth/click scroll wheel. It can be either smooth or clicky, and is switched by pressing in the scroll wheel. I really question Logitech's user research on that one. I've been using middle-click to open new links and close tabs for years now in my browser, and I'm not willing to give that up for this cool technology. In fact I HATE smooth scroll wheels in general, and need a clicky one. The option would be ok, but not if it's activated via the middle-click button. In closing, I'm looking for these items in my mouse: Thumb-operated scroll wheel or 'joystick'-like apparatus. Clicky, as-stiff-as-possible scroll wheel on top Normal middle-click functionality. Comfortable, preferably ergonomic design. Anyone have any suggestions? Logitech, want to get rid of that smoothing-scrolling crap so I can buy your mouse?

    Read the article

  • Fortinet: Is there any equivalent of the ASA's packet-tracer command?

    - by Kedare
    I would like to know if there is not Fortigates an equivalent of the packet-tracer command that we can find on the ASA. Here is an example of execution for those who don't know it: NAT and pass : lev5505# packet-tracer input inside tcp 192.168.3.20 9876 8.8.8.8 80 Phase: 1 Type: ACCESS-LIST Subtype: Result: ALLOW Config: Implicit Rule Additional Information: MAC Access list Phase: 2 Type: ROUTE-LOOKUP Subtype: input Result: ALLOW Config: Additional Information: in 0.0.0.0 0.0.0.0 outside Phase: 3 Type: ACCESS-LIST Subtype: log Result: ALLOW Config: access-group inside-in in interface inside access-list inside-in extended permit tcp any any eq www access-list inside-in remark Allows DNS Additional Information: Phase: 4 Type: IP-OPTIONS Subtype: Result: ALLOW Config: Additional Information: Phase: 5 Type: VPN Subtype: ipsec-tunnel-flow Result: ALLOW Config: Additional Information: Phase: 6 Type: NAT Subtype: Result: ALLOW Config: object network inside-network nat (inside,outside) dynamic interface Additional Information: Dynamic translate 192.168.3.20/9876 to 81.56.15.183/9876 Phase: 7 Type: IP-OPTIONS Subtype: Result: ALLOW Config: Additional Information: Phase: 8 Type: FLOW-CREATION Subtype: Result: ALLOW Config: Additional Information: New flow created with id 94755, packet dispatched to next module Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: allow Blocked by ACL: lev5505# packet-tracer input inside tcp 192.168.3.20 9876 8.8.8.8 81 Phase: 1 Type: ROUTE-LOOKUP Subtype: input Result: ALLOW Config: Additional Information: in 0.0.0.0 0.0.0.0 outside Phase: 2 Type: ACCESS-LIST Subtype: Result: DROP Config: Implicit Rule Additional Information: Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule Is there any equivalent on the Fortigates ?

    Read the article

  • The proxy server received an invalid response from an upstream server

    - by chandank
    I have tomcat server behind the apache. I am using mod_ssl and reverse proxy to the tomcat. All are running at default ports. The full error is as follow. ack Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request POST /pages/doeditpage.action. Reason: Error reading from remote server If I clean the browser cache the error goes away and comes back after few attempts. I test the same on Chrome/Firefox/IE on Windows platform. Wondering it works perfectly on Linux based Chrome/Firefox. I googled a lot there are few answers at stack overflow but I am not able to find my answer. Is this a server side problem? because so many browsers cant be wrong at same time on Windows.

    Read the article

  • New set up DHCP Server on Server 2008 R2 won't work, Event-ID 1046

    - by Ian
    I just set up a 2008 R2 as DC, and DNS. Both worked fine, DNS works fine forward and reverse lookup. Now I wanted to install DHCP. As soon as the installation of the role is finished, I get this Event-ID Error 1046: Link When I first set it up there was also a Event-ID 1059 Error: Link The dhcp server is authorized. I don't know what else I should do. Getting crazy here, hope you guys can help me.

    Read the article

  • Why does nmap ping scan over a VPN link return all hosts alive?

    - by ewwhite
    I'm curious as to why running an nmap -sP (ping scan) on a remote subnet linked via a Cisco site-to-site IPSec tunnel returns "host up" status for every IP in the range. [root@xt ~]# nmap -sP 192.168.108.* Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2012-11-22 14:08 CST Host 192.168.108.0 appears to be up. Host 192.168.108.1 appears to be up. Host 192.168.108.2 appears to be up. Host 192.168.108.3 appears to be up. Host 192.168.108.4 appears to be up. Host 192.168.108.5 appears to be up. . . . Host 192.168.108.252 appears to be up. Host 192.168.108.253 appears to be up. Host 192.168.108.254 appears to be up. Host 192.168.108.255 appears to be up. Nmap finished: 256 IP addresses (256 hosts up) scanned in 14.830 seconds However, a ping of a known-down IP simply times out or doesn't return anything... [root@xt ~]# ping 192.168.108.201 PING 192.168.108.201 (192.168.108.201) 56(84) bytes of data. --- 192.168.108.201 ping statistics --- 144 packets transmitted, 0 received, 100% packet loss, time 143001ms Is there a more effective way to scan live devices connected in this manner?

    Read the article

  • Forward Shibboleth Environment Variables to Tomcat via Apache

    - by Deepak Singh Rawat
    I am using Shibbolethv2.3 with Apache web server and Tomcat application server. I am using Apache as a reverse proxy using mod_proxy.so. I am not able to forward the Shibboleth environment variables from Apache to Tomcat. I am able to forward the attributes in the headers but as already mentioned in the wiki this approach is not safe. I have tried forwarding the environment variables by the following directive : SetEnv AJP_username ${username} then at the Java side I can access the attribute by : request.getAttribute("username"); The strange thing here is that, I get a different value instead of the one set by Shibboleth. I get the Windows account name as a result. If I use any other attribute name, I get a null value. I have searched a lot and have run out of options. Please guide me towards the right solution. My setup details : Shibboleth version : 2.3 OS : Windows XP SP3 Webserver : Apache 2.2 Application Server : Tomcat 6 Proxy module : mod_proxy.so

    Read the article

  • How to monitor current output/receive queue length in Linux

    - by IZhen
    I want to check the capacity and performance of my network. Besides checking the txkB/s and rxkB/s via Sar, I'd also like to see the average queue length of the network interface(so that the average queueing time in the interface can be calculated). It seems that netstat can give a per socket queue length, is it possible to get a per interface statics(a bit like Network Interface\Output Queue Length in Windows)? A related and kind of reverse questions is How do I view the TCP Send and Receive Queue sizes on Windows? Thanks

    Read the article

  • How to bypass firewall to connect to a proxy server?

    - by Bruce
    I am conducting a small experiment on my office network. I have setup a proxy server on my desktop machine (connected to my LAN) and I have volunteers access the internet via my proxy server. Everything is working well. The problem is people cannot connect to the proxy server through their laptops. I asked my network admin and he said the wireless network has a firewall which prevents users from connecting to my proxy. He said I could tunnel the traffic or use SSH though. I am afraid I do not understand fully what is going on. Is there a way by which users connected on the wireless network can connect to my desktop? I am using FreeProxy on Windows as my proxy server: http://www.handcraftedsoftware.org/index.php?page=download FreeProxy allows me to create a SOCKS 4/4a/5 proxy. Is that what I need? Part of the experiment involves logging the URL requests of the users. I am doing a measurement study. So, any solution must allow me to log the URL requests of users. Also, what changes do I need to make in the browser configuration.

    Read the article

  • How to configuration keepalived on Amazon EC2?

    - by oeegee
    I rad some article. Keepalived over GRE tunnel for failover on VPS environment http://blog.killtheradio.net/how-tos/keepalived-haproxy-and-failover-on-the-cloud-or-any-vps-without-multicast/ but, I don't know how to configuration? and How to call this architecture? only I Know that How to config Master/Backup configuration at keepalived. What I want to know that How does work keepalived? I want to design this.... XMPP Server(EC2) | ------------------------------------------------- keepalived Master(EC2) - keepalived Backup(EC2) HAProxy #1 HAProxy#2 ------------------------------------------------- | Casandra#1 Casandra#2 Casandra#3 Casandra#4 Thanks! but What I want to know how to work on keepalived with unicast patche modul. ELB is expansive. and this is first totaly design. [Flow] ELB -- XMPP Server -- ELB -- Casandra ELB | XMPP#1 XMPP#2 XMPP#3 XMPP#4 | ELB | Casandra#1 Casandra#2 Casandra#3 Casandra#4 and change first design. [Flow] ELB -- XMPP Server -- HAProxy Master(Casandra Farm) -- Casandra ELB | XMPP#1 XMPP#2 XMPP#3 XMPP#4 | ------------------------------------------------- keepalived Master(EC2) - keepalived Backup(EC2) HAProxy#1 HAProxy#2 ------------------------------------------------- | Casandra#1 Casandra#2 Casandra#3 Casandra#4 this is second. [Flow] ELB -- HAProxy(XMPP Farm) -- XMPP Server -- HAProxy(Casandra Farm) -- Casanda It's OK? ELB | HAProxy#1 HAProxy#2 HAProxy#3 HAProxy#4 XMPP#1 XMPP#2 XMPP#3 XMPP#4 | Casandra#1 Casandra#2 Casandra#3 Casandra#4

    Read the article

  • Turn off the Linux OOM killer by default?

    - by Peter Eisentraut
    The OOM killer on Linux wreaks havoc with various applications every so often, and it appears that not much is really done on the kernel development side to improve this. Would it not be better, as a best practice when setting up a new server, to reverse the default on the memory overcommitting, that is, turn it off (vm.overcommit_memory=2) unless you know you want it on for your particular use? And what would those use cases be where you know you want the overcommitting on? As a bonus, since the behavior in case of vm.overcommit_memory=2 depends on vm.overcommit_ratio and swap space, what would be a good rule of thumb for sizing the latter two so that this whole setup keeps working reasonably?

    Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >