Search Results

Search found 93861 results on 3755 pages for 'wild one'.

Page 75/3755 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

  • One dns server in different subnets

    - by hofmeister
    I have installed a small Linux server; the server is in a different subnet as the internet hosts. I added a route to my nat router to create a connection between both subnets. In both subnets I use an extra dhcp Server. Subnet A: 192.168.0.0/26 Subnet B: 192.168.1.0/26 Router: 192.168.0.1, Server in A: 192.168.0.62, Server in B: 192.168.1.62 internet ____ nat router ___ (Sub A)___ internet hosts | |____(Sub B)___ other hosts I could ping every host. Also the hosts which are connected to the subnet b, has internet connection. But sadly I have a problem with the dns server. I use the dnsServer from my nat router, I set the dns Server for subnet b to the ip 192.168.0.1, but every dns entries are equal with the hostname from my linux server. Example if the hostname from the server is test Test 192.168.0.62 //Server subnet a Test-2 192.168.1.62 //Server subnet b Test-2-2 192.168.1.1 //host a Test-2-2-2 192.168.1.2 //host b Any idea what went wrong? The internet dns resolution works fine.

    Read the article

  • How to migrate WinXP from failing old HD to new one

    - by Péter Török
    Following this issue, we have all our important data backed up now. I also bought and installed a new replacement hard disk (WD 160GB PATA) as secondary (slave) drive. I created two primary NTFS partitions on it: a 40 GB system partition, and a 110GB data partition. In theory I could start reinstalling WinXP from scratch on the new system partition, then copying over all user data from the old drive to the new data partition. Once this is done, I could even throw away the old drive, or keep it just to see what happens. (Note: I don't want to clone the whole drive as it contains a dual boot setup with an old Linux installation which I don't need anymore, and anyway, a fresh reinstall would do WinXP good to get rid of many years' clutter.) However, I am lazy :-) The old HD is still functioning, the problem has not manifested again since. So I feel there is no need to hurry with a complete OS reinstall. What I don't know though is whether I will be able to install WinXP on the new system partition at a later stage without affecting the contents of the data partition on the same drive. If this is possible, I can just move over all our data to the new data partition to have it safe, then continue running WinXP from the old drive as long as it works. Does anyone see any problems/risks with this plan?

    Read the article

  • Apache proxy: Why is one vhost returning Forbidden while the other one works?

    - by Stefan Majewsky
    I have a Java application that needs to talk to another intranet website using HTTPS in both directions. After fighting with Java's SSL implementations for some time, I gave up on that, and have now set up an Apache that's supposed to act as a bidirectional reverse proxy: external app ---(HTTPS request)---> Apache ---(local HTTP request)---> Java app This direction works just fine, however the other direction does not: Java app ---(local HTTP request)---> Apache ---(HTTPS request)---> external app This is the configuration for the vhost implementing the second proxy: Listen 127.0.0.1:8081 <VirtualHost appgateway:8081> ServerName appgateway.local SSLProxyEngine on ProxyPass / https://externalapp.corp:443/ ProxyPassReverse / https://externalapp.corp:443/ ProxyRequests Off AllowEncodedSlashes On # we do not need to apply any more restrictions here, because we listened on # local connections only in the first place (see the Listen directive above) <Proxy https://externalapp.corp:443/*> Order deny,allow Allow from all </Proxy> </VirtualHost> A curl http://127.0.0.1:8081/ should serve the equivalent of https://externalapp.corp, but instead results in 403 Forbidden, with the following message in the Apache error log: [Wed Jun 04 08:57:19 2014] [error] [client 127.0.0.1] Directory index forbidden by Options directive: /srv/www/htdocs/ This message completely puzzles me: Yes, I have not set up any permissions on the DocumentRoot of this vhost, but everything works fine for the other proxy direction where I haven't. For reference, here's the other vhost: Listen this_vm_hostname:443 <VirtualHost javaapp:443> ServerName javaapp.corp SSLEngine on SSLProxyEngine on # not shown: SSLCipherSuite, SSLCertificateFile, SSLCertificateKeyFile SSLOptions +StdEnvVars ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ ProxyRequests Off AllowEncodedSlashes On # Local reverse proxy authorization override <Proxy http://localhost:8080/*> Order deny,allow Allow from all </Proxy> </VirtualHost>

    Read the article

  • X11 forwarding from one server to other

    - by n3oblit7
    I have a setup where I need to forward X11 from my local machine (laptop) to a Virtual machine. The server hosting this VM cannot be reached directly from my laptop. I need to first login to a gateway and from this gateway, I can access the VM. How can I forward X11 from my laptop to this VM? I have tried following but these do not work: [laptop # ] ssh -X [gateway] [gateway # ] ssh -X [VM] [laptop # ] ssh -tX [gateway] ssh -X [VM] I could forward X11 only till the gateway. (DISPLAY variable gets set on gateway)

    Read the article

  • Route multiple subdomains on one external ip to multiple internal ips

    - by Abenil
    i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

    Read the article

  • iTunes Home Sharing only works one way between 2 Windows XP PC's on the same LAN

    - by scunliffe
    Both PC's have the latest iTunes installed. PC (A) can "see" that there is a shared library "B library" but attempts to connect to it return this error message: The shared library "{Username}'s Library" is not responding (-3259) Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689. however the reverse works fine. e.g. PC (B) can "see" shared library "A library" and can access all content. Notes: Both PC's have Home Sharing enabled (turned off/on several times to verify). Both PC's have Windows Firewall turned on, but in the exceptions tab, iTunes is allowed, and Port 3689 is also added as a firewall exception (just in case) Both iTunes accounts have been "authorized" on both PC's Both PC's connect via LAN via D-Link DIR-615 router. In the advanced application rules, iTunes has also been added to allow traffic on port 3689 un-hindered. Is there any other magical setting/configuration option that I should be aware of and set in order to get this to work? I could care less about sharing apps etc. I just want the music sharing to work. Update: Solved! It turns out on PC (B) there were multiple accounts set up. 1 of the accounts had the checkbox checked under the Windows firewall "On" option which states "No exceptions" thus even though it was added to the exception list on the main user account, this other account was blocking access.

    Read the article

  • One Common event for all controls in Silverlight

    - by Veejay
    I have a couple of textblock controls and all of them are calling a single event. But i have to wire all of them invidividually using TextBlock1.MouseMove += new MouseEventHandler(TextBlock_MouseMove); TextBlock2.MouseMove += new MouseEventHandler(TextBlock_MouseMove); TextBlock3.MouseMove += new MouseEventHandler(TextBlock_MouseMove); Is there a way that I can apply the mouse move to all TextBlock without wiring them one by one

    Read the article

  • Hourly CRON task running more frequently than one hour

    - by Justin
    I have a cron task that calls a special PHP script via wget. Here is the crontab entry: 0 * * * * wget http://www.... It will work perfect for several days, running on the hour. However, after a few days the cron job will start to be called several times an hour. I have never seen CRON drift like this, so I imagine it can't really be a CRON issue. However, the logs of the script that is called clearly show it running several times an hour. Server details: Ubuntu Luci Apache MySQL PHP5 Time is showing correct @ command line Server is setup to sync with a NTP server In order for the script to run it must be passed a unique 50-character hash key in the URL, so this script isn't being called from any other source accidentally. What might cause CRON to drift like this?

    Read the article

  • Linux - Multiple service statuses with one command

    - by Jimbo
    I'm trying to retrieve a list of multiple service statuses in Unix. I'm using the service command: man page. The statuses all start with the transmission-daemon string, for example. I require the ability to list multiple services' statuses, with a single command. Here is what I'm currently trying (and failing) with: Here I'm trying to grab a list of statuses using grep. service $(ls /etc/init.d | grep "transmission-daemon") status Here I'm trying to list all statuses, and then grep for them. service --status-all | grep "transmission-daemon" This produces the following, which isn't much help: How can I effectively achieve what I require with a single command, so that I can then continue piping to awk for further customisation? Desired example output: transmission-daemon started transmission-daemon2 stopped transmission-daemon3 started

    Read the article

  • WPF ClickOnce Bootstrap Dection Failure on One Machine

    - by Dexter Morgan
    Hello Friend, I've decided to use ClickOnce technology to deploy my new WPF application. By and large, ClickOnce works as advertised but I've hit a minor glitch regarding Bootstrapping and framework detection. Some background: - I'm using the standard Visual Studio-generated publish.htm page as my launch page. - The only prerequisite is the .NET Framework 4.0 Client Profile. - All clients using IE 8. - All clients already have the .NET 4.0 Client Profile installed. ClickOnce works as advertised on the vast majority of machines. The VS-generated JScript correctly detects that the framework is installed and presents the user with a Run button. The app launches just fine. I'm getting odd results on one of the machines, however. On the offending machine, the VS-generated JScript tells the user that the prereqs may not be installed -- or rather, it FAILS to detect that the framework is already installed. The "launch" link successfully launches the application but the Run link points to the bootstrapper setup.exe. Why is it failing to detect the framework on this one machine? It occurred to me that framework detection is largely a matter of examining the useragent string that's submitted by the browser. So, what you see below are two UserAgent strings. The first is from a machine where things are working properly. The second is from the offending machine. THIS ONE WORKS: 2011-01-11 15:14:14 W3SVC1 192.168.0.36 GET /publish.htm - 80 - 72.130.187.100 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.0;+Trident/4.0;+SLCC1;+.NET+CLR+2.0.50727;+Media+Center+PC+5.0;+.NET+CLR+3.5.21022;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+.NET4.0C) 304 0 0 THIS ONE DOESN'T: 2011-01-11 18:49:12 W3SVC1 192.168.0.36 GET /publish.htm - 80 - 76.212.204.169 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+GTB6.6;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0;+.NET4.0C) 200 0 0 The useragent string of both machines clearly states, "hey the .NET 4.0 client profile is installed here" -- yet the second machine seems unable to detect it. I don't know enough about useragent strings to understand why the former works and the latter fails. The only difference as far as I can tell is that the offending machine is running 64bit. But that shouldn't make a difference. Should it? Any ideas? Dexter Morgan

    Read the article

  • Multiple subdomains resolving to one domain?

    - by Matt
    I'm trying to host an application, but allow the customer to use their own sub domain so that it does not confuse their own customers. So for example, by application would run on app.mydomain.com, but my customer would access it via their own subdomain (app.somedomain.com and/or app.anotherdomain.com). Is this even possible? (Possibly relevant information: my application is hosted on media temple and uses Apache) Thanks!

    Read the article

  • more elements in one SpriteVisualElement in flex

    - by user325753
    I did it like this, but the old broadcast, doesn’t stay it is replaced with the ew one! `public function broadCastMeNow(event:Event):void { camId = comments.selectedItem["o_id"]; broadCastMe = new broadcastNow(camId); connn.addChild(broadCastMe); connn.x += 100; } s:SpriteVisualElement x=”100? id=”connn” ` How can I make it that it stays and adding the new one on x +=100px?

    Read the article

  • Use one Socket for send and recieve data

    - by volody
    What makes more sense? use one socket to send and receive data to/from a embedded hardware device use one socket to send data and separate socket to read data Communication is not very intensive but the important point is to receive data as fast as possible. On application side is used Windows XP and up.

    Read the article

  • logrotate deletes all maillogs older than one day

    - by shadyabhi
    I see only two files maillog and maillog.1 in /var/log. grepping for maillog in logrotate.d directory gives three files that have a mention of maillog. syslog /var/log/messages /var/log/secure /var/log/maillog /var/log/spooler /var/log/boot.log /var/log/cron { #/var/log/messages /var/log/secure /var/log/spooler /var/log/boot.log /var/log/cron { daily sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } syslog-ng /var/log/messages /var/log/secure /var/log/maillog /var/log/spooler /var/log/boot.log /var/log/cron /var/log/kern.log /var/log/kern { sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } and maillog. /var/log/maillog { daily compress # rotate 365 rotate 14 sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } I am new to logrotate so may be I am missing something obvious. What can be the issue? The setup was already done when I started managing the server so I don't also know as do why do I have 3 mentions for maillog in logrotate.

    Read the article

  • Forward all traffic from one IP to another Ip on OS X

    - by Josh
    This is related to this question I just asked... I have two IP address on my iMac I want to "bridge". I'm not sure what the proper terminology is... here's the situation. My iMac has a firewire connection to my laptop and an ethernet connection to the rest of my office. My laptop has an ip of 192.168.100.2 (on the firewire interface). My iMac has an IP of 192.168.100.1 on the firewire interface, and two IPs, 10.1.0.6 and 10.1.0.7, on it's ethernet interface. If I wanted to forward all traffic coming in from 192.168.100.2 on my OS X machine to go out on IP 10.1.0.7, and vice-versa, can this be done? I assume I would use the ipfw command. Essentially I want to "bridge" the firewire network to the ethernet network so my laptop can see all the machines on the 10.1 network, and all those machines can see my laptop at 10.1.0.7. Is this possible?

    Read the article

  • Configure bash_profile for one single terminal emulator

    - by Hugo
    I'm using a new terminal emulator. Terminology is the E17 default terminal, and it have a great command, $ tyls with is a "graphical" $ ls I want to create an alias just for this terminal, because the command "tyls" don't make sense to konsole, rxvt or other terminals. I'm thinking in some kind of "if" in ~/.bash_profile to test if I'm on terminology and then run the following command: alias ls="tyls" But how can I test if I'm in terminology but not xterm? Can someone help me? Thanks!

    Read the article

  • Two UITableView in one UIViewController problem

    - by georgij
    I considered to use two UITableView in one UIViewController which is also do data source for them but encountered the problem that while both tables visit numberOfRowsInSection only one visit cellForRowAtIndexPath at the start and both tables contain empty rows. Do someone know why this happens?

    Read the article

  • Tracking costs within one AWS account

    - by caius howcroft
    I have what I'm sure is a very common problem. Our company has many projects and groups working for different clients. We do a lot of our development work in the cloud and deploy our solutions there. We have a VPC set up that isolates projects from each other in their own subnet and that VPC is getting a hardware VPN connection back to HQ. We need to keep track of the cost run up by every project. The way I currently implement this is by providing my own tools for starting and stopping instances which log which user (and thus which project) to bill the instance too. This works okay for BoxUsage costs but not for other costs. I could create a separate account for each project and use consolidated billing, this I think would allow me to pay once but track costs per "project", but I would then not be able to share common resources (like bring account B's running instances inside the same VPC). Does anyone have any suggestions? Cheers C

    Read the article

  • Protect all XML-RPC calls with HTTP basic auth but one

    - by bodom_lx
    I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

    Read the article

  • IIS: redirect everything to another URL, except for one Directory

    - by DrStalker
    I have an IIS server (IIS 6, Win 2003) that hosts the site http://www.foo.com. I want any request to http://foo.com (no matter what path/filename is used) to redirect to http://www.bar.org/AwesomePage.html UNLESS the request is for http://www.foo.com/specialdir, in which case the HTML files in the local directory specialdir should be used. The problem I have is once the redirect is set it also affects /specialdir - even if I right click on that directory and select "content should come from ... local directory" that change does not take effect, and the directory still shows as redirecting to http://www.bar.org/AwesomePage.html. The same thing happens if I try to set individual files to load from the local system instead of redirecting - IIS gives no error, but the change does not take effect and the files still show as being redirected. How can I set specialdir to override the redirection to the new URL?

    Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >