Search Results

Search found 7776 results on 312 pages for 'configure'.

Page 76/312 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • What's New In 11.1.2.1 (Talleyrand SP1)

    - by russ.bishop
    This release is primarily about bug fixes and that's what we spent the most time on, but we also addressed a number of other things: 1. Performance improvements We've done a lot of work to improve the performance of page load and execution times. For example, the View Compare page is about half the size it was previously! We've also done a lot of work on the server to improve performance of queries, exports, action scripts, etc. We implemented some finer-grained locking so fewer operations will block other users while they are in progress. We made some optimizations to improve performance when you have a lot of network or database latency as well. Just a few examples: An Import that previously took 8 GB of memory and hours to complete now runs in about 30 minutes and never takes more than 1 GB of RAM. Searching by exact Node Name now completes within 2 seconds even for a hierarchy with millions of nodes. Another search that was taking 30 seconds to run now completes in less than 5 seconds. 2. Upgrade support This release supports automatic upgrade from previous releases, built right into the console. 3. Console Improvements The Console has been reorganized and made easier to use. It is also much more multi-threaded so it responds quicker without freezing up when you save changes or when it needs to get status. 4. Property Namespaces Properties now have a concept called a Namespace. This is tied into the Application Templates to prevent conflicts with duplicate property names. Right now, if you have an AccountType and you pull in the HFM template, it also has AccountType so you end up creating properties with decorations on the name like "Account Type (HFM)". This is no longer necessary. In addition, properties within a namespace must have unique labels but they can be duplicated across namespaces. So in the Property Grid when you click on the HFM category, you just see "AccountType". When you click on MyCategory, you see "AccountType", but they are different properties with different values. Within formulas, the names are still unique (eg: Custom.AccountType vs HFM.AccountType). I'll write more about this one later. 5. Single Sign On DRM now supports Single Sign-On via HSS. For example, if you are using Oracle's OAM as your SSO solution then you configure HSS to use OAM just like you would before. You also configure DRM to use HSS, again just like before. Then you configure OAM to protect the DRM web app, like you would any other website. However once you do those things, users are no longer prompted to enter their username/password. They simply get redirected to OAM if they don't already have a login token, otherwise they pick their application and sail right into DRM. You can also avoid having to pick an application (see the next item) 6. URL-based navigation You can now specify the application you want to log into via the URL. Combined with SSO and your Intranet, it becomes easy to provide links on our intranet portal that take users directly into a specific DRM application. We also support specifying the Version, Hierarchy, and Node. Again, this can be used on your internal portal, but the scenarios get even more interesting when you are using workflow like Oracle BPEL you can automatically generate links within emails that will take users directly to a specific node in the UI. 7. Job status and cancellation A lot of the jobs now report their status and support true cancellation. Action Scripts also report a progress complete percentage since the amount of work is known ahead of time. 8. Action Script Options Action scripts support Option declarations at the top of the file so a script can self-describe (when specified in the file, the corresponding item in the file is ignored). For example: Option|DetectDelimiter Option|UsePropertyNames|true This will tell DRM to automatically detect the delimiter (a pipe symbol in this case) and that all references to properties are by Name, not by Label. Note that when you load a script in the UI, if you use Labels we automatically try to match them up if they are unique. Any duplicates are indicated and you are presented with a choice to pick which property you actually referred to. This is somewhat similar to Version substitution, but tailored for properties. There are other more minor changes and like I said earlier a lot of bug fixes and performance improvements. Hopefully I will get a chance to dig into some of these things in future blog posts.

    Read the article

  • ASP.NET: Using pickup directory for outgoing e-mails

    - by DigiMortal
    Sending e-mails out from web applications is very common task. When we are working on or test our systems with real e-mail addresses we don’t want recipients to receive e-mails (specially if we are using some subset of real data9. In this posting I will show you how to make ASP.NET SMTP client to write e-mails to disc instead of sending them out. SMTP settings for web application I have seen many times the code where all SMTP information is kept in app settings just to read them in code and give to SMTP client. It is not necessary because we can define all these settings under system.web => mailsettings node. If you are using web.config to keep SMTP settings then all you have to do in your code is just to create SmtpClient with empty constructor. var smtpClient = new SmtpClient(); Empty constructor means that all settings are read from web.config file. What is pickup directory? If you want drastically raise e-mail throughput of your SMTP server then it is not very wise plan to communicate with it using SMTP protocol. it adds only additional overhead to your network and SMTP server. Okay, clients make connections, send messages out and it is also overhead we can avoid. If clients write their e-mails to some folder that SMTP server can access then SMTP server has e-mail forwarding as only resource-eager task to do. File operations are way faster than communication over SMTP protocol. The directory where clients write their e-mails as files is called pickup directory. By example, Exchange server has support for pickup directories. And as there are applications with a lot of users who want e-mail notifications then .NET SMTP client supports writing e-mails to pickup directory instead of sending them out. How to configure ASP.NET SMTP to use pickup directory? Let’s say, it is more than easy. It is very easy. This is all you need. <system.net>   <mailSettings>     <smtp deliveryMethod="SpecifiedPickupDirectory">       <specifiedPickupDirectory pickupDirectoryLocation="c:\temp\maildrop\"/>     </smtp>   </mailSettings> </system.net> Now make sure you don’t miss come points: Pickup directory must physically exist because it is not created automatically. IIS (or Cassini) must have write permissions to pickup directory. Go through your code and look for hardcoded SMTP settings. Also take a look at all places in your code where you send out e-mails that there are not some custom settings used for SMTP! Also don’t forget that your mails will be written now to pickup directory and they are not sent out to recipients anymore. Advanced scenario: configuring SMTP client in code In some advanced scenarios you may need to support multiple SMTP servers. If configuration is dynamic or it is not kept in web.config you need to initialize your SmtpClient in code. This is all you need to do. var smtpClient = new SmtpClient(); smtpClient.DeliveryMethod = SmtpDeliveryMethod.SpecifiedPickupDirectory; smtpClient.PickupDirectoryLocation = pickupFolder; Easy, isn’t it? i like when advanced scenarios end up with simple and elegant solutions but not with rocket science. Note for IIS SMTP service SMTP service of IIS is also able to use pickup directory. If you have set up IIS with SMTP service you can configure your ASP.NET application to use IIS pickup folder. In this case you have to use the following setting for delivery method. SmtpDeliveryMethod.PickupDirectoryFromIis You can set this setting also in web.config file. <system.net>   <mailSettings>     <smtp deliveryMethod="PickupDirectoryFromIis" />   </mailSettings> </system.net> Conclusion Who was still using different methods to avoid sending e-mails out in development or testing environment can now remove all the bad code from application and live on mail settings of ASP.NET. It is easy to configure and you have less code to support e-mails when you use built-in e-mail features wisely.

    Read the article

  • Cannot connect to Open WiFi hotspot created by Android

    - by Bibhas
    I'm trying to share my 3G data connection via WiFi hotspot. I have an open Hotspot running on my phone(Xperia Neo V - MT11i - Android 2.3.4). But I cannot connect to it from my Ubuntu system. Here is the syslog while I try to connect to it - NetworkManager[1077]: <info> Activation (wlan0) starting connection 'TheNeo' NetworkManager[1077]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... NetworkManager[1077]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[1077]: <info> Activation (wlan0/wireless): connection 'TheNeo' requires no security. No secrets needed. NetworkManager[1077]: <info> Config: added 'ssid' value 'TheNeo' NetworkManager[1077]: <info> Config: added 'scan_ssid' value '1' NetworkManager[1077]: <info> Config: added 'key_mgmt' value 'NONE' NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. NetworkManager[1077]: <info> Config: set interface ap_scan to 1 NetworkManager[1077]: <info> (wlan0): supplicant interface state: inactive -> scanning wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) NetworkManager[1077]: <info> (wlan0): supplicant interface state: scanning -> authenticating kernel: [17498.113553] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17498.310138] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17498.510069] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17498.710083] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17504.779927] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17504.976420] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17505.176379] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17505.376314] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17511.478385] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17511.674738] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17511.874655] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17512.074659] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17518.152643] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17518.349064] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17518.549051] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17518.748999] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17524.858896] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17525.055404] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17525.255387] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17525.455254] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17531.589176] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17531.785747] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17531.985724] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17532.185610] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17538.329257] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17538.528003] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17538.728024] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17538.927922] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17545.022036] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17545.218339] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17545.418319] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17545.618206] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17551.724177] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17551.920685] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17552.120597] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17552.320526] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out NetworkManager[1077]: <warn> Activation (wlan0/wireless): association took too long, failing activation. NetworkManager[1077]: <info> (wlan0): device state change: config -> failed (reason 'supplicant-timeout') [50 120 11] NetworkManager[1077]: <warn> Activation (wlan0) failed for access point (TheNeo) NetworkManager[1077]: <warn> Activation (wlan0) failed. NetworkManager[1077]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[1077]: <info> (wlan0): deactivating device (reason 'none') [0] NetworkManager[1077]: <info> (wlan0): supplicant interface state: authenticating -> disconnected NetworkManager[1077]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Why is direct probe to 5c:b5:24:2f:d1:2f timed out? Any idea?

    Read the article

  • Configuring UCM cache to check for external Content Server changes

    - by Martin Deh
    Recently, I was involved in a customer scenario where they were modifying the Content Server's contributor data files directly through Content Server.  This operation of course is completely supported.  However, since the contributor data file was modified through the "backdoor", a running WebCenter Spaces page, which also used the same data file, would not get the updates immediately.  This was due to two reasons.  The first reason is that the Spaces page was using Content Presenter to display the contents of the data file. The second reason is that the Spaces application was using the "cached" version of the data file.  Fortunately, there is a way to configure cache so backdoor changes can be picked up more quickly and automatically. First a brief overview of Content Presenter.  The Content Presenter task flow enables WebCenter Spaces users with Page-Edit permissions to precisely customize the selection and presentation of content in a WebCenter Spaces application.  With Content Presenter, you can select a single item of content, contents under a folder, a list of items, or query for content, and then select a Content Presenter based template to render the content on a page in a Spaces application.  In addition to displaying the folders and the files in a Content Server, Content Presenter integrates with Oracle Site Studio to allow you to create, access, edit, and display Site Studio contributor data files (Content Server Document) in either a Site Studio region template or in a custom Content Presenter display template.  More information about creating Content Presenter Display Template can be found in the OFM Developers Guide for WebCenter Portal. The easiest way to configure the cache is to modify the WebCenter Spaces Content Server service connection setting through Enterprise Manager.  From here, under the Cache Details, there is a section to set the Cache Invalidation Interval.  Basically, this enables the cache to be monitored by the cache "sweeper" utility.  The cache sweeper queries for changes in the Content Server, and then "marks" the object in cache as "dirty".  This causes the application in turn to get a new copy of the document from the Content Server that replaces the cached version.  By default the initial value for the Cache Invalidation Interval is set to 0 (minutes).  This basically means that the sweeper is OFF.  To turn the sweeper ON, just set a value (in minutes).  The mininal value that can be set is 2 (minutes): Just a note.  In some instances, once the value of the Cache Invalidation Interval has been set (and saved) in the Enterprise Manager UI, it becomes "sticky" and the interval value cannot be set back to 0.  The good news is that this value can also be updated throught a WLST command.   The WLST command to run is as follows: setJCRContentServerConnection(appName, name, [socketType, url, serverHost, serverPort, keystoreLocation, keystorePassword, privateKeyAlias, privateKeyPassword, webContextRoot, clientSecurityPolicy, cacheInvalidationInterval, binaryCacheMaxEntrySize, adminUsername, adminPassword, extAppId, timeout, isPrimary, server, applicationVersion]) One way to get the required information for executing the command is to use the listJCRContentServerConnections('webcenter',verbose=true) command.  For example, this is the sample output from the execution: ------------------ UCM ------------------ Connection Name: UCM Connection Type: JCR External Appliction ID: Timeout: (not set) CIS Socket Type: socket CIS Server Hostname: webcenter.oracle.local CIS Server Port: 4444 CIS Keystore Location: CIS Private Key Alias: CIS Web URL: Web Server Context Root: /cs Client Security Policy: Admin User Name: sysadmin Cache Invalidation Interval: 2 Binary Cache Maximum Entry Size: 1024 The Documents primary connection is "UCM" From this information, the completed  setJCRContentServerConnection would be: setJCRContentServerConnection(appName='webcenter',name='UCM', socketType='socket', serverHost='webcenter.oracle.local', serverPort='4444', webContextRoot='/cs', cacheInvalidationInterval='0', binaryCacheMaxEntrySize='1024',adminUsername='sysadmin',isPrimary=1) Note: The Spaces managed server must be restarted for the change to take effect. More information about using WLST for WebCenter can be found here. Once the sweeper is turned ON, only cache objects that have been changed will be invalidated.  To test this out, I will go through a simple scenario.  The first thing to do is configure the Content Server so it can monitor and report on events.  Log into the Content Server console application, and under the Administration menu item, select System Audit Information.  Note: If your console is using the left menu display option, the Administration link will be located there. Under the Tracing Sections Information, add in only "system" and "requestaudit" in the Active Sections.  Check Full Verbose Tracing, check Save, then click the Update button.  Once this is done, select the View Server Output menu option.  This will change the browser view to display the log.  This is all that is needed to configure the Content Server. For example, the following is the View Server Output with the cache invalidation interval set to 2(minutes) Note the time stamp: requestaudit/6 08.30 09:52:26.001  IdcServer-68    GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.016933999955654144(secs) requestaudit/6 08.30 09:52:26.010  IdcServer-69    GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.006134999915957451(secs) requestaudit/6 08.30 09:52:26.014  IdcServer-70    GET_DOCUMENT_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.004271999932825565(secs) ... other trace info ... requestaudit/6 08.30 09:54:26.002  IdcServer-71    GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.020323999226093292(secs) requestaudit/6 08.30 09:54:26.011  IdcServer-72    GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.017928000539541245(secs) requestaudit/6 08.30 09:54:26.017  IdcServer-73    GET_DOCUMENT_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.010185999795794487(secs) Now that the tracing logs are reporting correctly, the next step is set up the Spaces app to test the sweeper. I will use 2 different pages that will use Content Presenter task flows.  Each task flow will use a different custom Content Presenter display template, and will be assign 2 different contributor data files (document that will be in the cache).  The pages at run time appear as follows: Initially, when the Space pages containing the content is loaded in the browser for the first time, you can see the tracing information in the Content Server output viewer. requestaudit/6 08.30 11:51:12.030 IdcServer-129 CLEAR_SERVER_OUTPUT [dUser=weblogic] 0.029171999543905258(secs) requestaudit/6 08.30 11:51:12.101 IdcServer-130 GET_SERVER_OUTPUT [dUser=weblogic] 0.025721000507473946(secs) requestaudit/6 08.30 11:51:26.592 IdcServer-131 VCR_GET_DOCUMENT_BY_NAME [dID=919][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][RevisionSelectionMethod=LatestReleased][IsJava=1] 0.21525299549102783(secs) requestaudit/6 08.30 11:51:27.117 IdcServer-132 VCR_GET_CONTENT_TYPES [dUser=sysadmin][IsJava=1] 0.5059549808502197(secs) requestaudit/6 08.30 11:51:27.146 IdcServer-133 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.03360399976372719(secs) requestaudit/6 08.30 11:51:27.169 IdcServer-134 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.008806000463664532(secs) requestaudit/6 08.30 11:51:27.204 IdcServer-135 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.013265999965369701(secs) requestaudit/6 08.30 11:51:27.384 IdcServer-136 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.18119299411773682(secs) requestaudit/6 08.30 11:51:27.533 IdcServer-137 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.1519480049610138(secs) requestaudit/6 08.30 11:51:27.634 IdcServer-138 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.10827399790287018(secs) requestaudit/6 08.30 11:51:27.687 IdcServer-139 VCR_GET_CONTENT_TYPE [dUser=sysadmin][IsJava=1] 0.059702999889850616(secs) requestaudit/6 08.30 11:51:28.271 IdcServer-140 GET_USER_PERMISSIONS [dUser=weblogic][IsJava=1] 0.006703000050038099(secs) requestaudit/6 08.30 11:51:28.285 IdcServer-141 GET_ENVIRONMENT [dUser=sysadmin][IsJava=1] 0.010893999598920345(secs) requestaudit/6 08.30 11:51:30.433 IdcServer-142 GET_SERVER_OUTPUT [dUser=weblogic] 0.017318999394774437(secs) requestaudit/6 08.30 11:51:41.837 IdcServer-143 VCR_GET_DOCUMENT_BY_NAME [dID=508][dDocName=113_ES][dDocTitle=Landing Home][dUser=weblogic][RevisionSelectionMethod=LatestReleased][IsJava=1] 0.15937699377536774(secs) requestaudit/6 08.30 11:51:42.781 IdcServer-144 GET_FILE [dID=326][dDocName=WEBCENTERORACL000315][dDocTitle=Duke][dUser=anonymous][RevisionSelectionMethod=LatestReleased][dSecurityGroup=Public][xCollectionID=0] 0.16288499534130096(secs) The highlighted sections show where the 2 data files DF_UCMCACHETESTER (P1 page) and 113_ES (P2 page) were called by the (Spaces) VCR connection to the Content Server. The most important line to notice is the VCR_GET_DOCUMENT_BY_NAME invocation.  On subsequent refreshes of these 2 pages, you will notice (after you refresh the Content Server's View Server Output) that there are no further traces of the same VCR_GET_DOCUMENT_BY_NAME invocations.  This is because the pages are getting the documents from the cache. The next step is to go through the "backdoor" and change one of the documents through the Content Server console.  This operation can be done by first locating the data file document, and from the Content Information page, select Edit Data File menu option.   This invokes the Site Studio Contributor, where the modifications can be made. Refreshing the Content Server View Server Output, the tracing displays the operations perform on the document.  requestaudit/6 08.30 11:56:59.972 IdcServer-255 SS_CHECKOUT_BY_NAME [dID=922][dDocName=DF_UCMCACHETESTER][dUser=weblogic][dSecurityGroup=Public] 0.05558200180530548(secs) requestaudit/6 08.30 11:57:00.065 IdcServer-256 SS_GET_CONTRIBUTOR_CONFIG [dID=922][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][dSecurityGroup=Public][xCollectionID=0] 0.08632399886846542(secs) requestaudit/6 08.30 11:57:00.470 IdcServer-259 DOC_INFO_BY_NAME [dID=922][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][dSecurityGroup=Public][xCollectionID=0] 0.02268899977207184(secs) requestaudit/6 08.30 11:57:10.177 IdcServer-264 GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.007652000058442354(secs) requestaudit/6 08.30 11:57:10.181 IdcServer-263 GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.01868399977684021(secs) requestaudit/6 08.30 11:57:10.187 IdcServer-265 GET_DOCUMENT_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.009367000311613083(secs) (internal)/6 08.30 11:57:26.118 IdcServer-266 File to be removed: /oracle/app/admin/domains/webcenter/ucm/cs/vault/~temp/703253295.xml (internal)/6 08.30 11:57:26.121 IdcServer-266 File to be removed: /oracle/app/admin/domains/webcenter/ucm/cs/vault/~temp/703253295.xml requestaudit/6 08.30 11:57:26.122 IdcServer-266 SS_SET_ELEMENT_DATA [dID=923][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][dSecurityGroup=Public][xCollectionID=0][StatusCode=0][StatusMessage=Successfully checked in content item 'DF_UCMCACHETESTER'.] 0.3765290081501007(secs) requestaudit/6 08.30 11:57:30.710 IdcServer-267 DOC_INFO_BY_NAME [dID=923][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][dSecurityGroup=Public][xCollectionID=0] 0.07942699640989304(secs) requestaudit/6 08.30 11:57:30.733 IdcServer-268 SS_GET_CONTRIBUTOR_STRINGS [dUser=weblogic] 0.0044570001773536205(secs) After a few moments and refreshing the P1 page, the updates has been applied. Note: The refresh time may very, since the Cache Invalidation Interval (set to 2 minutes) is not determined by when changes happened.  The sweeper just runs every 2 minutes. Refreshing the Content Server View Server Output, the tracing displays the important information. requestaudit/6 08.30 11:59:10.171 IdcServer-270 GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.00952600035816431(secs) requestaudit/6 08.30 11:59:10.179 IdcServer-271 GET_FOLDER_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.011118999682366848(secs) requestaudit/6 08.30 11:59:10.182 IdcServer-272 GET_DOCUMENT_HISTORY_REPORT [dUser=sysadmin][IsJava=1] 0.007447000127285719(secs) requestaudit/6 08.30 11:59:16.885 IdcServer-273 VCR_GET_DOCUMENT_BY_NAME [dID=923][dDocName=DF_UCMCACHETESTER][dDocTitle=DF_UCMCacheTester][dUser=weblogic][RevisionSelectionMethod=LatestReleased][IsJava=1] 0.0786449983716011(secs) After the specifed interval time the sweeper is invoked, which is noted by the GET_ ... calls.  Since the history has noted the change, the next call is to the VCR_GET_DOCUMENT_BY_NAME to retrieve the new version of the (modifed) data file.  Navigating back to the P2 page, and viewing the server output, there are no further VCR_GET_DOCUMENT_BY_NAME to retrieve the data file.  This simply means that this data file was just retrieved from the cache.   Upon further review of the server output, we can see that there was only 1 request for the VCR_GET_DOCUMENT_BY_NAME: requestaudit/6 08.30 12:08:00.021 Audit Request Monitor Request Audit Report over the last 120 Seconds for server webcenteroraclelocal16200****  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor -Num Requests 8 Errors 0 Reqs/sec. 0.06666944175958633 Avg. Latency (secs) 0.02762500010430813 Max Thread Count 2  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor 1 Service VCR_GET_DOCUMENT_BY_NAME Total Elapsed Time (secs) 0.09200000017881393 Num requests 1 Num errors 0 Avg. Latency (secs) 0.09200000017881393  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor 2 Service GET_PERSONALIZED_JAVASCRIPT Total Elapsed Time (secs) 0.054999999701976776 Num requests 1 Num errors 0 Avg. Latency (secs) 0.054999999701976776  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor 3 Service GET_FOLDER_HISTORY_REPORT Total Elapsed Time (secs) 0.028999999165534973 Num requests 2 Num errors 0 Avg. Latency (secs) 0.014499999582767487  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor 4 Service GET_SERVER_OUTPUT Total Elapsed Time (secs) 0.017999999225139618 Num requests 1 Num errors 0 Avg. Latency (secs) 0.017999999225139618  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor 5 Service GET_FILE Total Elapsed Time (secs) 0.013000000268220901 Num requests 1 Num errors 0 Avg. Latency (secs) 0.013000000268220901  requestaudit/6 08.30 12:08:00.021 Audit Request Monitor ****End Audit Report*****  

    Read the article

  • OpenVPN not connecting

    - by LandArch
    There have been a number of post similar to this, but none seem to satisfy my need. Plus I am a Ubuntu newbie. I followed this tutorial to completely set up OpenVPN on Ubuntu 12.04 server. Here is my server.conf file ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) local 192.168.13.8 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? proto tcp ;proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "/etc/openvpn/ca.crt" cert "/etc/openvpn/server.crt" key "/etc/openvpn/server.key" # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. ;server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. server-bridge 192.168.13.101 255.255.255.0 192.168.13.105 192.168.13.200 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 192.168.13.1 255.255.255.0" push "dhcp-option DNS 192.168.13.201" push "dhcp-option DOMAIN blahblah.dyndns-wiki.com" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. user nobody group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I am using Windows 7 as the Client and set that up accordingly using the OpenVPN GUI. That conf file is as follows: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. proto tcp ;proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. blahblah.dyndns-wiki.com 1194 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) user nobody group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\OpenVPN\config\\ca.crt" cert "C:\\Program Files\OpenVPN\config\\ChadMWade-THINK.crt" key "C:\\Program Files\OpenVPN\config\\ChadMWade-THINK.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Not sure whats left to do.

    Read the article

  • Windows Azure: General Availability of Web Sites + Mobile Services, New AutoScale + Alerts Support, No Credit Card Needed for MSDN

    - by ScottGu
    This morning we released a major set of updates to Windows Azure.  These updates included: Web Sites: General Availability Release of Windows Azure Web Sites with SLA Mobile Services: General Availability Release of Windows Azure Mobile Services with SLA Auto-Scale: New automatic scaling support for Web Sites, Cloud Services and Virtual Machines Alerts/Notifications: New email alerting support for all Compute Services (Web Sites, Mobile Services, Cloud Services, and Virtual Machines) MSDN: No more credit card requirement for sign-up All of these improvements are now available to use immediately (note: some are still in preview).  Below are more details about them. Web Sites: General Availability Release of Windows Azure Web Sites I’m incredibly excited to announce the General Availability release of Windows Azure Web Sites. The Windows Azure Web Sites service is perfect for hosting a web presence, building customer engagement solutions, and delivering business web apps.  Today’s General Availability release means we are taking off the “preview” tag from the Free and Standard (formerly called reserved) tiers of Windows Azure Web Sites.  This means we are providing: A 99.9% monthly SLA (Service Level Agreement) for the Standard tier Microsoft Support available on a 24x7 basis (with plans that range from developer plans to enterprise Premier support) The Free tier runs in a shared compute environment and supports up to 10 web sites. While the Free tier does not come with an SLA, it works great for rapid development and testing and enables you to quickly spike out ideas at no cost. The Standard tier, which was called “Reserved” during the preview, runs using dedicated per-customer VM instances for great performance, isolation and scalability, and enables you to host up to 500 different Web sites within them.  You can easily scale your Standard instances on-demand using the Windows Azure Management Portal.  You can adjust VM instance sizes from a Small instance size (1 core, 1.75GB of RAM), up to a Medium instance size (2 core, 3.5GB of RAM), or Large instance (4 cores and 7 GB RAM).  You can choose to run between 1 and 10 Standard instances, enabling you to easily scale up your web backend to 40 cores of CPU and 70GB of RAM: Today’s release also includes general availability support for custom domain SSL certificate bindings for web sites running using the Standard tier. Customers will be able to utilize certificates they purchase for their custom domains and use either SNI or IP based SSL encryption. SNI encryption is available for all modern browsers and does not require an IP address.  SSL certificates can be used for individual sites or wild-card mapped across multiple sites (we charge extra for the use of a SSL cert – but the fee is per-cert and not per site which means you pay once for it regardless of how many sites you use it with).  Today’s release also includes the following new features: Auto-Scale support Today’s Windows Azure release adds preview support for Auto-Scaling web sites.  This enables you to setup automatic scale rules based on the activity of your instances – allowing you to automatically scale down (and save money) when they are below a CPU threshold you define, and automatically scale up quickly when traffic increases.  See below for more details. 64-bit and 32-bit mode support You can now choose to run your standard tier instances in either 32-bit or 64-bit mode (previously they only ran in 32-bit mode).  This enables you to address even more memory within individual web applications. Memory dumps Memory dumps can be very useful for diagnosing issues and debugging apps. Using a REST API, you can now get a memory dump of your sites, which you can then use for investigating issues in Visual Studio Debugger, WinDbg, and other tools. Scaling Sites Independently Prior to today’s release, all sites scaled up/down together whenever you scaled any site in a sub-region. So you may have had to keep your proof-of-concept or testing sites in a separate sub-region if you wanted to keep them in the Free tier. This will no longer be necessary.  Windows Azure Web Sites can now mix different tier levels in the same geographic sub-region. This allows you, for example, to selectively move some of your sites in the West US sub-region up to Standard tier when they require the features, scalability, and SLA of the Standard tier. Full pricing details on Windows Azure Web Sites can be found here.  Note that the “Shared Tier” of Windows Azure Web Sites remains in preview mode (and continues to have discounted preview pricing).  Mobile Services: General Availability Release of Windows Azure Mobile Services I’m incredibly excited to announce the General Availability release of Windows Azure Mobile Services.  Mobile Services is perfect for building scalable cloud back-ends for Windows 8.x, Windows Phone, Apple iOS, Android, and HTML/JavaScript applications.  Customers We’ve seen tremendous adoption of Windows Azure Mobile Services since we first previewed it last September, and more than 20,000 customers are now running mobile back-ends in production using it.  These customers range from startups like Yatterbox, to university students using Mobile Services to complete apps like Sly Fox in their spare time, to media giants like Verdens Gang finding new ways to deliver content, and telcos like TalkTalk Business delivering the up-to-the-minute information their customers require.  In today’s Build keynote, we demonstrated how TalkTalk Business is using Windows Azure Mobile Services to deliver service, outage and billing information to its customers, wherever they might be. Partners When we unveiled the source control and Custom API features I blogged about two weeks ago, we enabled a range of new scenarios, one of which is a more flexible way to work with third party services.  The following blogs, samples and tutorials from our partners cover great ways you can extend Mobile Services to help you build rich modern apps: New Relic allows developers to monitor and manage the end-to-end performance of iOS and Android applications connected to Mobile Services. SendGrid eliminates the complexity of sending email from Mobile Services, saving time and money, while providing reliable delivery to the inbox. Twilio provides a telephony infrastructure web service in the cloud that you can use with Mobile Services to integrate phone calls, text messages and IP voice communications into your mobile apps. Xamarin provides a Mobile Services add on to make it easy building cross-platform connected mobile aps. Pusher allows quickly and securely add scalable real-time messaging functionality to Mobile Services-based web and mobile apps. Visual Studio 2013 and Windows 8.1 This week during //build/ keynote, we demonstrated how Visual Studio 2013, Mobile Services and Windows 8.1 make building connected apps easier than ever. Developers building Windows 8 applications in Visual Studio can now connect them to Windows Azure Mobile Services by simply right clicking then choosing Add Connected Service. You can either create a new Mobile Service or choose existing Mobile Service in the Add Connected Service dialog. Once completed, Visual Studio adds a reference to Mobile Services SDK to your project and generates a Mobile Services client initialization snippet automatically. Add Push Notifications Push Notifications and Live Tiles are a key to building engaging experiences. Visual Studio 2013 and Mobile Services make it super easy to add push notifications to your Windows 8.1 app, by clicking Add a Push Notification item: The Add Push Notification wizard will then guide you through the registration with the Windows Store as well as connecting your app to a new or existing mobile service. Upon completion of the wizard, Visual Studio will configure your mobile service with the WNS credentials, as well as add sample logic to your client project and your mobile service that demonstrates how to send push notifications to your app. Server Explorer Integration In Visual Studio 2013 you can also now view your Mobile Services in the the Server Explorer. You can add tables, edit, and save server side scripts without ever leaving Visual Studio, as shown on the image below: Pricing With today’s general availability release we are announcing that we will be offering Mobile Services in three tiers – Free, Standard, and Premium.  Each tier is metered using a simple pricing model based on the # of API calls (bandwidth is included at no extra charge), and the Standard and Premium tiers are backed by 99.9% monthly SLAs.  You can elastically scale up or down the number of instances you have of each tier to increase the # of API requests your service can support – allowing you to efficiently scale as your business grows. The following table summarizes the new pricing model (full pricing details here):   You can find the full details of the new pricing model here. Build Conference Talks The //BUILD/ conference will be packed with sessions covering every aspect of developing connected applications with Mobile Services. The best part is that, even if you can’t be with us in San Francisco, every session is being streamed live. Be sure not to miss these talks: Mobile Services – Soup to Nuts — Josh Twist Building Cross-Platform Apps with Windows Azure Mobile Services — Chris Risner Connected Windows Phone Apps made Easy with Mobile Services — Yavor Georgiev Build Connected Windows 8.1 Apps with Mobile Services — Nick Harris Who’s that user? Identity in Mobile Apps — Dinesh Kulkarni Building REST Services with JavaScript — Nathan Totten Going Live and Beyond with Windows Azure Mobile Services — Kirill Gavrylyuk , Paul Batum Protips for Windows Azure Mobile Services — Chris Risner AutoScale: Dynamically scale up/down your app based on real-world usage One of the key benefits of Windows Azure is that you can dynamically scale your application in response to changing demand. In the past, though, you have had to either manually change the scale of your application, or use additional tooling (such as WASABi or MetricsHub) to automatically scale your application. Today, we’re announcing that AutoScale will be built-into Windows Azure directly.  With today’s release it is now enabled for Cloud Services, Virtual Machines and Web Sites (Mobile Services support will come soon). Auto-scale enables you to configure Windows Azure to automatically scale your application dynamically on your behalf (without any manual intervention) so you can achieve the ideal performance and cost balance. Once configured it will regularly adjust the number of instances running in response to the load in your application. Currently, we support two different load metrics: CPU percentage Storage queue depth (Cloud Services and Virtual Machines only) We’ll enable automatic scaling on even more scale metrics in future updates. When to use Auto-Scale The following are good criteria for services/apps that will benefit from the use of auto-scale: The service/app can scale horizontally (e.g. it can be duplicated to multiple instances) The service/app load changes over time If your app meets these criteria, then you should look to leverage auto-scale. How to Enable Auto-Scale To enable auto-scale, simply navigate to the Scale tab in the Windows Azure Management Portal for the app/service you wish to enable.  Within the scale tab turn the Auto-Scale setting on to either CPU or Queue (for Cloud Services and VMs) to enable Auto-Scale.  Then change the instance count and target CPU settings to configure the Auto-Scale ranges you want to maintain. The image below demonstrates how to enable Auto-Scale on a Windows Azure Web-Site.  I’ve configured the web-site so that it will run using between 1 and 5 VM instances.  The exact # used will depend on the aggregate CPU of the VMs using the 40-70% range I’ve configured below.  If the aggregate CPU goes above 70%, then Windows Azure will automatically add new VMs to the pool (up to the maximum of 5 instances I’ve configured it to use).  If the aggregate CPU drops below 40% then Windows Azure will automatically start shutting down VMs to save me money: Once you’ve turned auto-scale on, you can return to the Scale tab at any point and select Off to manually set the number of instances. Using the Auto-Scale Preview With today’s update you can now, in just a few minutes, have Windows Azure automatically adjust the number of instances you have running  in your apps to keep your service performant at an even better cost. Auto-scale is being released today as a preview feature, and will be free until General Availability. During preview, each subscription is limited to 10 separate auto-scale rules across all of the resources they have (Web sites, Cloud services or Virtual Machines). If you hit the 10 limit, you can disable auto-scale for any resource to enable it for another. Alerts and Notifications Starting today we are now providing the ability to configure threshold based alerts on monitoring metrics. This feature is available for compute services (cloud services, VM, websites and mobiles services). Alerts provide you the ability to get proactively notified of active or impending issues within your application.  You can define alert rules for: Virtual machine monitoring metrics that are collected from the host operating system (CPU percentage, network in/out, disk read bytes/sec and disk write bytes/sec) and on monitoring metrics from monitoring web endpoint urls (response time and uptime) that you have configured. Cloud service monitoring metrics that are collected from the host operating system (same as VM), monitoring metrics from the guest VM (from performance counters within the VM) and on monitoring metrics from monitoring web endpoint urls (response time and uptime) that you have configured. For Web Sites and Mobile Services, alerting rules can be configured on monitoring metrics from monitoring endpoint urls (response time and uptime) that you have configured. Creating Alert Rules You can add an alert rule for a monitoring metric by navigating to the Setting -> Alerts tab in the Windows Azure Management Portal. Click on the Add Rule button to create an alert rule. Give the alert rule a name and optionally add a description. Then pick the service which you want to define the alert rule on: The next step in the alert creation wizard will then filter the monitoring metrics based on the service you selected:   Once created the rule will show up in your alerts list within the settings tab: The rule above is defined as “not activated” since it hasn’t tripped over the CPU threshold we set.  If the CPU on the above machine goes over the limit, though, I’ll get an email notifying me from an Windows Azure Alerts email address ([email protected]). And when I log into the portal and revisit the alerts tab I’ll see it highlighted in red.  Clicking it will then enable me to see what is causing it to fail, as well as view the history of when it has happened in the past. Alert Notifications With today’s initial preview you can now easily create alerting rules based on monitoring metrics and get notified on active or impending issues within your application that require attention. During preview, each subscription is limited to 10 alert rules across all of the services that support alert rules. No More Credit Card Requirement for MSDN Subscribers Earlier this month (during TechEd 2013), Windows Azure announced that MSDN users will get Windows Azure Credits every month that they can use for any Windows Azure services they want. You can read details about this in my previous Dev/Test blog post. Today we are making further updates to enable an easier Windows Azure signup for MSDN users. MSDN users will now not be required to provide payment information (e.g. no credit card) during sign-up, so long as they use the service within the included monetary credit for the billing period. For usage beyond the monetary credit, they can enable overages by providing the payment information and remove the spending limit. This enables a super easy, one page sign-up experience for MSDN users.  Simply sign-up for your Windows Azure trial using the same Microsoft ID that you use to manage your MSDN account, then complete the one page sign-up form below and you will be able to spend your free monthly MSDN credits (up to $150 each month) on any Windows Azure resource for dev/test:   This makes it trivially easy for every MDSN customer to start using Windows Azure today.  If you haven’t signed up yet, I definitely recommend checking it out. Summary Today’s release includes a ton of great features that enable you to build even better cloud solutions.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • Handling HumanTask attachments in Oracle BPM 11g PS4FP+ (II)

    - by ccasares
    Retrieving uploaded attachments -UCM- As stated in my previous blog entry, Oracle BPM 11g 11.1.1.5.1 (aka PS4FP) introduced a new cool feature whereby you can use Oracle WebCenter Content (previously known as Oracle UCM) as the repository for the human task attached documents. For more information about how to use or enable this feature, have a look here. The attachment scope (either TASK or PROCESS) also applies to UCM-attachments. But even with this other feature, one question might arise when using UCM attachments. How can I get them from within the process? The first answer would be to use the same getTaskAttachmentContents() XPath function already explained in my previous blog entry. In fact, that's the way it should be. But in Oracle BPM 11g 11.1.1.5.1 (PS4FP) and 11.1.1.6.0 (PS5) there's a bug that prevents you to do that. If you invoke such function against a UCM-attachment, you'll get a null content response (bug#13907552). Even if the attachment was correctly uploaded. While this bug gets fixed, next I will show a workaround that lets me to retrieve the UCM-attached documents from within a BPM process. Besides, the sample will show how to interact with WCC API from within a BPM process.Aside note: I suggest you to read my previous blog entry about Human Task attachments where I briefly describe some concepts that are used next, such as the execData/attachment[] structure. Sample Process I will be using the following sample process: A dummy UserTask using "HumanTask2" Human Task, followed by an Embedded Subprocess that will retrieve the attachments payload. In this case, and here's the key point of the sample, we will retrieve such payload using WebCenter Content WebService API (IDC): and once retrieved, we will write each of them back to a file in the server using a File Adapter service: In detail:  We will use the same attachmentCollection XSD structure and same BusinessObject definition as in the previous blog entry. However we create a separate variable, named attachmentUCM, based on such BusinessObject. We will still need to keep a copy of the HumanTask output's execData structure. Therefore we need to create a new variable of type TaskExecutionData (different one than the other used for non-UCM attachments): As in the non-UCM attachments flow, in the output tab of the UserTask mapping, we'll keep a copy of the execData structure: Now we get into the embedded subprocess that will retrieve the attachments' payload. First, and using an XSLT transformation, we feed the attachmentUCM variable with the following information: The name of each attachment (from execData/attachment/name element) The WebCenter Content ID of the uploaded attachment. This info is stored in execData/attachment/URI element with the format ecm://<id>. As we just want the numeric <id>, we need to get rid of the protocol prefix ("ecm://"). We do so with some XPath functions as detailed below: with these two functions being invoked, respectively: We, again, set the target payload element with an empty string, to get the <payload></payload> tag created. The complete XSLT transformation is shown below. Remember that we're using the XSLT for-each node to create as many target structures as necessary.  Once we have fed the attachmentsUCM structure and so it now contains the name of each of the attachments along with each WCC unique id (dID), it is time to iterate through it and get the payload. Therefore we will use a new embedded subprocess of type MultiInstance, that will iterate over the attachmentsUCM/attachment[] element: In each iteration we will use a Service activity that invokes WCC API through a WebService. Follow these steps to create and configure the Partner Link needed: Login to WCC console with an administrator user (i.e. weblogic). Go to Administration menu and click on "Soap Wsdls" link. We will use the GetFile service to retrieve a file based on its dID. Thus we'll need such service WSDL definition that can be downloaded by clicking the GetFile link. Save the WSDL file in your JDev project folder. In the BPM project's composite view, drag & drop a WebService adapter to create a new External Reference, based on the just added GetFile.wsdl. Name it UCM_GetFile. WCC services are secured through basic HTTP authentication. Therefore we need to enable the just created reference for that: Right-click the reference and click on Configure WS Policies. Under the Security section, click "+" to add the "oracle/wss_username_token_client_policy" policy The last step is to set the credentials for the security policy. For the sample we will use the admin user for WCC (weblogic/welcome1). Open the composite.xml file and select the Source view. Search for the UCM_GetFile entry and add the following highlighted elements into it:   <reference name="UCM_GetFile" ui:wsdlLocation="GetFile.wsdl">     <interface.wsdl interface="http://www.stellent.com/GetFile/#wsdl.interface(GetFileSoap)"/>     <binding.ws port="http://www.stellent.com/GetFile/#wsdl.endpoint(GetFile/GetFileSoap)"                 location="GetFile.wsdl" soapVersion="1.1">       <wsp:PolicyReference URI="oracle/wss_username_token_client_policy"                            orawsp:category="security" orawsp:status="enabled"/>       <property name="weblogic.wsee.wsat.transaction.flowOption"                 type="xs:string" many="false">WSDLDriven</property>       <property name="oracle.webservices.auth.username"                 type="xs:string">weblogic</property>       <property name="oracle.webservices.auth.password"                 type="xs:string">welcome1</property>     </binding.ws>   </reference> Now the new external reference is ready: Once the reference has just been created, we should be able now to use it from our BPM process. However we find here a problem. The WCC GetFile service operation that we will use, GetFileByID, accepts as input a structure similar to this one, where all element tags are optional: <get:GetFileByID xmlns:get="http://www.stellent.com/GetFile/">    <get:dID>?</get:dID>   <get:rendition>?</get:rendition>   <get:extraProps>      <get:property>         <get:name>?</get:name>         <get:value>?</get:value>      </get:property>   </get:extraProps></get:GetFileByID> and we need to fill up just the <get:dID> tag element. Due to some kind of restriction or bug on WCC, the rest of the tag elements must NOT be sent, not even empty (i.e.: <get:rendition></get:rendition> or <get:rendition/>). A sample request that performs the query just by the dID, must be in the following format: <get:GetFileByID xmlns:get="http://www.stellent.com/GetFile/">   <get:dID>12345</get:dID></get:GetFileByID> The issue here is that the simple mapping in BPM does create empty tags being a sample result as follows: <get:GetFileByID xmlns:get="http://www.stellent.com/GetFile/"> <get:dID>12345</get:dID> <get:rendition/> <get:extraProps/> </get:GetFileByID> Although the above structure is perfectly valid, it is not accepted by WCC. Therefore, we need to bypass the problem. The workaround we use (many others are available) is to add a Mediator component between the BPM process and the Service that simply copies the input structure from BPM but getting rid of the empty tags. Follow these steps to configure the Mediator: Drag & drop a new Mediator component into the composite. Uncheck the creation of the SOAP bindings and use the Interface Definition from WSDL template and select the existing GetFile.wsdl Double click in the mediator to edit it. Add a static routing rule to the GetFileByID operation, of type Service and select References/UCM_GetFile/GetFileByID target service: Create the request and reply XSLT mappers: Make sure you map only the dID element in the request: And do an Auto-mapper for the whole response: Finally, we can now add and configure the Service activity in the BPM process. Drag & drop it to the embedded subprocess and select the NormalizedGetFile service and getFileByID operation: Map both the input: ...and the output: Once this embedded subprocess ends, we will have all attachments (name + payload) in the attachmentsUCM variable, which is the main goal of this sample. But in order to test everything runs fine, we finish the sample writing each attachment to a file. To that end we include a final embedded subprocess to concurrently iterate through each attachmentsUCM/attachment[] element: On each iteration we will use a Service activity that invokes a File Adapter write service. In here we have two important parameters to set. First, the payload itself. The file adapter awaits binary data in base64 format (string). We have to map it using XPath (Simple mapping doesn't recognize a String as a base64-binary valid target): Second, we must set the target filename using the Service Properties dialog box: Again, note how we're making use of the loopCounter index variable to get the right element within the embedded subprocess iteration. Final blog entry about attachments will handle how to inject documents to Human Tasks from the BPM process and how to share attachments between different User Tasks. Will come soon. Again, once I finish will all posts on this matter, I will upload the whole sample project to java.net.

    Read the article

  • Windows Azure: Major Updates for Mobile Backend Development

    - by ScottGu
    This week we released some great updates to Windows Azure that make it significantly easier to develop mobile applications that use the cloud. These new capabilities include: Mobile Services: Custom API support Mobile Services: Git Source Control support Mobile Services: Node.js NPM Module support Mobile Services: A .NET API via NuGet Mobile Services and Web Sites: Free 20MB SQL Database Option for Mobile Services and Web Sites Mobile Notification Hubs: Android Broadcast Push Notification Support All of these improvements are now available to use immediately (note: some are still in preview).  Below are more details about them. Mobile Services: Custom APIs, Git Source Control, and NuGet Windows Azure Mobile Services provides the ability to easily stand up a mobile backend that can be used to support your Windows 8, Windows Phone, iOS, Android and HTML5 client applications.  Starting with the first preview we supported the ability to easily extend your data backend logic with server side scripting that executes as part of client-side CRUD operations against your cloud back data tables. With today’s update we are extending this support even further and introducing the ability for you to also create and expose Custom APIs from your Mobile Service backend, and easily publish them to your Mobile clients without having to associate them with a data table. This capability enables a whole set of new scenarios – including the ability to work with data sources other than SQL Databases (for example: Table Services or MongoDB), broker calls to 3rd party APIs, integrate with Windows Azure Queues or Service Bus, work with custom non-JSON payloads (e.g. Windows Periodic Notifications), route client requests to services back on-premises (e.g. with the new Windows Azure BizTalk Services), or simply implement functionality that doesn’t correspond to a database operation.  The custom APIs can be written in server-side JavaScript (using Node.js) and can use Node’s NPM packages.  We will also be adding support for custom APIs written using .NET in the future as well. Creating a Custom API Adding a custom API to an existing Mobile Service is super easy.  Using the Windows Azure Management Portal you can now simply click the new “API” tab with your Mobile Service, and then click the “Create a Custom API” button to create a new Custom API within it: Give the API whatever name you want to expose, and then choose the security permissions you’d like to apply to the HTTP methods you expose within it.  You can easily lock down the HTTP verbs to your Custom API to be available to anyone, only those who have a valid application key, only authenticated users, or administrators.  Mobile Services will then enforce these permissions without you having to write any code: When you click the ok button you’ll see the new API show up in the API list.  Selecting it will enable you to edit the default script that contains some placeholder functionality: Today’s release enables Custom APIs to be written using Node.js (we will support writing Custom APIs in .NET as well in a future release), and the Custom API programming model follows the Node.js convention for modules, which is to export functions to handle HTTP requests. The default script above exposes functionality for an HTTP POST request. To support a GET, simply change the export statement accordingly.  Below is an example of some code for reading and returning data from Windows Azure Table Storage using the Azure Node API: After saving the changes, you can now call this API from any Mobile Service client application (including Windows 8, Windows Phone, iOS, Android or HTML5 with CORS). Below is the code for how you could invoke the API asynchronously from a Windows Store application using .NET and the new InvokeApiAsync method, and data-bind the results to control within your XAML:     private async void RefreshTodoItems() {         var results = await App.MobileService.InvokeApiAsync<List<TodoItem>>("todos", HttpMethod.Get, parameters: null);         ListItems.ItemsSource = new ObservableCollection<TodoItem>(results);     }    Integrating authentication and authorization with Custom APIs is really easy with Mobile Services. Just like with data requests, custom API requests enjoy the same built-in authentication and authorization support of Mobile Services (including integration with Microsoft ID, Google, Facebook and Twitter authentication providers), and it also enables you to easily integrate your Custom API code with other Mobile Service capabilities like push notifications, logging, SQL, etc. Check out our new tutorials to learn more about to use new Custom API support, and starting adding them to your app today. Mobile Services: Git Source Control Support Today’s Mobile Services update also enables source control integration with Git.  The new source control support provides a Git repository as part your Mobile Service, and it includes all of your existing Mobile Service scripts and permissions. You can clone that git repository on your local machine, make changes to any of your scripts, and then easily deploy the mobile service to production using Git. This enables a really great developer workflow that works on any developer machine (Windows, Mac and Linux). To use the new support, navigate to the dashboard for your mobile service and select the Set up source control link: If this is your first time enabling Git within Windows Azure, you will be prompted to enter the credentials you want to use to access the repository: Once you configure this, you can switch to the configure tab of your Mobile Service and you will see a Git URL you can use to use your repository: You can use this URL to clone the repository locally from your favorite command line: > git clone https://scottgutodo.scm.azure-mobile.net/ScottGuToDo.git Below is the directory structure of the repository: As you can see, the repository contains a service folder with several subfolders. Custom API scripts and associated permissions appear under the api folder as .js and .json files respectively (the .json files persist a JSON representation of the security settings for your endpoints). Similarly, table scripts and table permissions appear as .js and .json files, but since table scripts are separate per CRUD operation, they follow the naming convention of <tablename>.<operationname>.js. Finally, scheduled job scripts appear in the scheduler folder, and the shared folder is provided as a convenient location for you to store code shared by multiple scripts and a few miscellaneous things such as the APNS feedback script. Lets modify the table script todos.js file so that we have slightly better error handling when an exception occurs when we query our Table service: todos.js tableService.queryEntities(query, function(error, todoItems){     if (error) {         console.error("Error querying table: " + error);         response.send(500);     } else {         response.send(200, todoItems);     }        }); Save these changes, and now back in the command line prompt commit the changes and push them to the Mobile Services: > git add . > git commit –m "better error handling in todos.js" > git push Once deployment of the changes is complete, they will take effect immediately, and you will also see the changes be reflected in the portal: With the new Source Control feature, we’re making it really easy for you to edit your mobile service locally and push changes in an atomic fashion without sacrificing ease of use in the Windows Azure Portal. Mobile Services: NPM Module Support The new Mobile Services source control support also allows you to add any Node.js module you need in the scripts beyond the fixed set provided by Mobile Services. For example, you can easily switch to use Mongo instead of Windows Azure table in our example above. Set up Mongo DB by either purchasing a MongoLab subscription (which provides MongoDB as a Service) via the Windows Azure Store or set it up yourself on a Virtual Machine (either Windows or Linux). Then go the service folder of your local git repository and run the following command: > npm install mongoose This will add the Mongoose module to your Mobile Service scripts.  After that you can use and reference the Mongoose module in your custom API scripts to access your Mongo database: var mongoose = require('mongoose'); var schema = mongoose.Schema({ text: String, completed: Boolean });   exports.get = function (request, response) {     mongoose.connect('<your Mongo connection string> ');     TodoItemModel = mongoose.model('todoitem', schema);     TodoItemModel.find(function (err, items) {         if (err) {             console.log('error:' + err);             return response.send(500);         }         response.send(200, items);     }); }; Don’t forget to push your changes to your mobile service once you are done > git add . > git commit –m "Switched to use Mongo Labs" > git push Now our Mobile Service app is using Mongo DB! Note, with today’s update usage of custom Node.js modules is limited to Custom API scripts only. We will enable it in all scripts (including data and custom CRON tasks) shortly. New Mobile Services NuGet package, including .NET 4.5 support A few months ago we announced a new pre-release version of the Mobile Services client SDK based on portable class libraries (PCL). Today, we are excited to announce that this new library is now a stable .NET client SDK for mobile services and is no longer a pre-release package. Today’s update includes full support for Windows Store, Windows Phone 7.x, and .NET 4.5, which allows developers to use Mobile Services from ASP.NET or WPF applications. You can install and use this package today via NuGet. Mobile Services and Web Sites: Free 20MB Database for Mobile Services and Web Sites Starting today, every customer of Windows Azure gets one Free 20MB database to use for 12 months free (for both dev/test and production) with Web Sites and Mobile Services. When creating a Mobile Service or a Web Site, simply chose the new “Create a new Free 20MB database” option to take advantage of it: You can use this free SQL Database together with the 10 free Web Sites and 10 free Mobile Services you get with your Windows Azure subscription, or from any other Windows Azure VM or Cloud Service. Notification Hubs: Android Broadcast Push Notification Support Earlier this year, we introduced a new capability in Windows Azure for sending broadcast push notifications at high scale: Notification Hubs. In the initial preview of Notification Hubs you could use this support with both iOS and Windows devices.  Today we’re excited to announce new Notification Hubs support for sending push notifications to Android devices as well. Push notifications are a vital component of mobile applications.  They are critical not only in consumer apps, where they are used to increase app engagement and usage, but also in enterprise apps where up-to-date information increases employee responsiveness to business events.  You can use Notification Hubs to send push notifications to devices from any type of app (a Mobile Service, Web Site, Cloud Service or Virtual Machine). Notification Hubs provide you with the following capabilities: Cross-platform Push Notifications Support. Notification Hubs provide a common API to send push notifications to iOS, Android, or Windows Store at once.  Your app can send notifications in platform specific formats or in a platform-independent way.  Efficient Multicast. Notification Hubs are optimized to enable push notification broadcast to thousands or millions of devices with low latency.  Your server back-end can fire one message into a Notification Hub, and millions of push notifications can automatically be delivered to your users.  Devices and apps can specify a number of per-user tags when registering with a Notification Hub. These tags do not need to be pre-provisioned or disposed, and provide a very easy way to send filtered notifications to an infinite number of users/devices with a single API call.   Extreme Scale. Notification Hubs enable you to reach millions of devices without you having to re-architect or shard your application.  The pub/sub routing mechanism allows you to broadcast notifications in a super-efficient way.  This makes it incredibly easy to route and deliver notification messages to millions of users without having to build your own routing infrastructure. Usable from any Backend App. Notification Hubs can be easily integrated into any back-end server app, whether it is a Mobile Service, a Web Site, a Cloud Service or an IAAS VM. It is easy to configure Notification Hubs to send push notifications to Android. Create a new Notification Hub within the Windows Azure Management Portal (New->App Services->Service Bus->Notification Hub): Then register for Google Cloud Messaging using https://code.google.com/apis/console and obtain your API key, then simply paste that key on the Configure tab of your Notification Hub management page under the Google Cloud Messaging Settings: Then just add code to the OnCreate method of your Android app’s MainActivity class to register the device with Notification Hubs: gcm = GoogleCloudMessaging.getInstance(this); String connectionString = "<your listen access connection string>"; hub = new NotificationHub("<your notification hub name>", connectionString, this); String regid = gcm.register(SENDER_ID); hub.register(regid, "myTag"); Now you can broadcast notification from your .NET backend (or Node, Java, or PHP) to any Windows Store, Android, or iOS device registered for “myTag” tag via a single API call (you can literally broadcast messages to millions of clients you have registered with just one API call): var hubClient = NotificationHubClient.CreateClientFromConnectionString(                   “<your connection string with full access>”,                   "<your notification hub name>"); hubClient.SendGcmNativeNotification("{ 'data' : {'msg' : 'Hello from Windows Azure!' } }", "myTag”); Notification Hubs provide an extremely scalable, cross-platform, push notification infrastructure that enables you to efficiently route push notification messages to millions of mobile users and devices.  It will make enabling your push notification logic significantly simpler and more scalable, and allow you to build even better apps with it. Learn more about Notification Hubs here on MSDN . Summary The above features are now live and available to start using immediately (note: some of the services are still in preview).  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today.  Visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • How to inject AutoMapper IMappingEngine with StructureMap

    - by Jay Walker
    Most of the examples I've found for Automapper use the static Mapper object for managing type mappings. For my project, I need to inject an IMapperEngine as part of object construction using StructureMap so that we can mock the mapper in unit tests so we can't use the static mapper. I also need to support configuring AutoMapper Profiles. My question is how can I configure the StructureMap registry so that it can supply an instance of IMappingEngine when an instance of MyService is constructed. Here is the Service constructor signature: public MyService(IMappingEngine mapper, IMyRepository myRepository, ILogger logger) And here is the StructureMap Registry public class MyRegistry : StructureMap.Configuration.DSL.Registry { public MyRegistry() { For<IMyRepository>().Use<MyRepository>(); For<ILogger>().Use<Logger>(); //what to do for IMappingEngine? } } And the profile I want to load public class MyAutoMapperProfile : AutoMapper.Profile { protected override void Configure() { this.CreateMap<MyModel, MyDTO>(); } }

    Read the article

  • IntelliJ 12 - Grails Distribution in specified path is broken

    - by Prayag Upd
    I am struggling to configure grails 2.3.X in IntelliJ idea 12. Grails 2.2.X is configured successfully. Grails 2.3.2 is working properly from terminal. I can compile, test, run my application. But while trying to configure it in IntelliJ so that dependencies get resolved, I get the IntelliJ shouting straight to me(as pictured below). Looks like Grails Distribution in specified path is broken. Cannot determinate version. What I see is changes in grails-2.3.x/dist/ to earlier version's grails-2.2.x/dist/. Is this because there's no support for newer version(2.3.x) of grails in IntelliJ 12 or what ? I want nothing else but my application (jar) dependencies to be resolved in the IDE.

    Read the article

  • "No message serializer has been configured" error when starting NServiceBus endpoint

    - by SteveBering
    My GenericHost hosted service is failing to start with the following message: 2010-05-07 09:13:47,406 [1] FATAL NServiceBus.Host.Internal.GenericHost [(null)] <(null) - System.InvalidOperationException: No message serializer has been con figured. at NServiceBus.Unicast.Transport.Msmq.MsmqTransport.CheckConfiguration() in d:\BuildAgent-02\work\672d81652eaca4e1\src\impl\unicast\NServiceBus.Unicast.Msmq\ MsmqTransport.cs:line 241 at NServiceBus.Unicast.Transport.Msmq.MsmqTransport.Start() in d:\BuildAgent-02\work\672d81652eaca4e1\src\impl\unicast\NServiceBus.Unicast.Msmq\MsmqTransport .cs:line 211 at NServiceBus.Unicast.UnicastBus.NServiceBus.IStartableBus.Start(Action startupAction) in d:\BuildAgent-02\work\672d81652eaca4e1\src\unicast\NServiceBus.Uni cast\UnicastBus.cs:line 694 at NServiceBus.Unicast.UnicastBus.NServiceBus.IStartableBus.Start() in d:\BuildAgent-02\work\672d81652eaca4e1\src\unicast\NServiceBus.Unicast\UnicastBus.cs:l ine 665 at NServiceBus.Host.Internal.GenericHost.Start() in d:\BuildAgent-02\work\672d81652eaca4e1\src\host\NServiceBus.Host\Internal\GenericHost.cs:line 77 My endpoint configuration looks like: public class ServiceEndpointConfiguration : IConfigureThisEndpoint, AsA_Publisher, IWantCustomInitialization { public void Init() { // build out persistence infrastructure var sessionFactory = Bootstrapper.InitializePersistence(); // configure NServiceBus infrastructure var container = Bootstrapper.BuildDependencies(sessionFactory); // set up logging log4net.Config.XmlConfigurator.Configure(); Configure.With() .Log4Net() .UnityBuilder(container) .XmlSerializer(); } } And my app.config looks like: <configSections> <section name="MsmqTransportConfig" type="NServiceBus.Config.MsmqTransportConfig, NServiceBus.Core" /> <section name="UnicastBusConfig" type="NServiceBus.Config.UnicastBusConfig, NServiceBus.Core" /> <section name="Logging" type="NServiceBus.Config.Logging, NServiceBus.Core" /> <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net" requirePermission="false" /> </configSections> <Logging Threshold="DEBUG" /> <MsmqTransportConfig InputQueue="NServiceBus.ServiceInput" ErrorQueue="NServiceBus.Errors" NumberOfWorkerThreads="1" MaxRetries="2" /> <UnicastBusConfig DistributorControlAddress="" DistributorDataAddress="" ForwardReceivedMessagesTo="NServiceBus.Auditing"> <MessageEndpointMappings> <!-- publishers don't need to set this for their own message types --> </MessageEndpointMappings> </UnicastBusConfig> <connectionStrings> <add name="Db" connectionString="Data Source=..." providerName="System.Data.SqlClient" /> </connectionStrings> <log4net debug="true"> <root> <level value="INFO"/> </root> <logger name="NHibernate"> <level value="ERROR" /> </logger> </log4net> This has worked in the past, but seems to be failing when the generic host starts. My endpoint configuration is below, along with the app.config for the service. What is strange is that in my endpoint configuration, I am specifying to use the XmlSerializer for message serialization. I don't see any other errors in the console output preceding the error message. What am I missing? Thanks, Steve

    Read the article

  • SSL in tomcat with apr and Centos 6

    - by Jonathan
    I'm facing a problem setting up my tomcat with apr native lib, I have the following: Tomcat: 7.0.42 Java: 1.7.0_40-b43 OS: Centos 6.4 (2.6.32-358.18.1.el6.i686) APR: 1.3.9 Native lib: 1.1.27 OpenSSL: openssl-1.0.0-27.el6_4.2.i686 My server.xml looks like: ... <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> ... <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" SSLCertificateFile="/tmp/monitoringPortalCert.pem" SSLCertificateKeyFile="/tmp/monitoringPortalKey.pem" SSLPassword="hide" /> ... I compiled the native lib as follow: ./configure --with-apr=/usr/bin/apr-1-config --with-ssl=yes --prefix=$CATALINA_HOME make && make install The APR is loaded ok: Oct 06, 2013 7:55:14 PM org.apache.catalina.core.AprLifecycleListener init INFO: Loaded APR based Apache Tomcat Native library 1.1.27 using APR version 1.3.9. But I'm still having this error: SEVERE: Failed to initialize the SSLEngine. org.apache.tomcat.jni.Error: 70023: This function has not been implemented on this platform ./configure outcome [root@localhost native]# ./configure --with-apr=/usr/bin/apr-1-config --with-ssl=yes -- prefix=$CATALINA_HOME && make && make install checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking for working mkdir -p... yes Tomcat Native Version: 1.1.27 checking for chosen layout... tcnative checking for APR... yes setting CC to "gcc" setting CPP to "gcc -E" checking for JDK location (please wait)... /usr/java/jdk1.7.0_40 from environment checking Java platform... checking Java platform... checking for sablevm... NONE adding "-I/usr/java/jdk1.7.0_40/include" to TCNATIVE_PRIV_INCLUDES checking os_type directory... linux adding "-I/usr/java/jdk1.7.0_40/include/linux" to TCNATIVE_PRIV_INCLUDES checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for OpenSSL library... using openssl from /usr/lib and /usr/include checking OpenSSL library version... ok checking for OpenSSL DSA support... yes setting TCNATIVE_LDFLAGS to "-lssl -lcrypto" adding "-DHAVE_OPENSSL" to CFLAGS setting TCNATIVE_LIBS to "" setting TCNATIVE_LIBS to " /usr/lib/libapr-1.la -lpthread" configure: creating ./config.status config.status: creating tcnative.pc config.status: creating Makefile config.status: executing default commands make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' /usr/lib/apr-1/build/mkdir.sh /usr/apache-tomcat-7.0.42/include/apr-1 /usr/apache- tomcat-7.0.42/lib/pkgconfig \ /usr/apache-tomcat-7.0.42/lib /usr/apache-tomcat-7.0.42/bin /usr/bin/install -c -m 644 tcnative.pc /usr/apache-tomcat-7.0.42/lib/pkgconfig/tcnative- 1.pc list=''; for i in $list; do \ ( cd $i ; make DESTDIR= install ); \ done /bin/sh /usr/lib/apr-1/build/libtool --mode=install /usr/bin/install -c -m 755 libtcnative-1.la /usr/apache-tomcat-7.0.42/lib libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.so.0.1.27 /usr/apache- tomcat-7.0.42/lib/libtcnative-1.so.0.1.27 libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so.0 || { rm -f libtcnative-1.so.0 && ln -s libtcnative- 1.so.0.1.27 libtcnative-1.so.0; }; }) libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so || { rm -f libtcnative-1.so && ln -s libtcnative-1.so.0.1.27 libtcnative-1.so; }; }) libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.lai /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.la libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.a /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.a libtool: install: chmod 644 /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: ranlib /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: warning: remember to run `libtool --finish /usr/local/apr/lib' make && make install outcome: make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' /usr/lib/apr-1/build/mkdir.sh /usr/apache-tomcat-7.0.42/include/apr-1 /usr/apache- tomcat-7.0.42/lib/pkgconfig \ /usr/apache-tomcat-7.0.42/lib /usr/apache-tomcat-7.0.42/bin /usr/bin/install -c -m 644 tcnative.pc /usr/apache-tomcat-7.0.42/lib/pkgconfig/tcnative- 1.pc list=''; for i in $list; do \ ( cd $i ; make DESTDIR= install ); \ done /bin/sh /usr/lib/apr-1/build/libtool --mode=install /usr/bin/install -c -m 755 libtcnative-1.la /usr/apache-tomcat-7.0.42/lib libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.so.0.1.27 /usr/apache- tomcat-7.0.42/lib/libtcnative-1.so.0.1.27 libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so.0 || { rm -f libtcnative-1.so.0 && ln -s libtcnative- 1.so.0.1.27 libtcnative-1.so.0; }; }) libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so || { rm -f libtcnative-1.so && ln -s libtcnative-1.so.0.1.27 libtcnative-1.so; }; }) libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.lai /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.la libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.a /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.a libtool: install: chmod 644 /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: ranlib /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: warning: remember to run `libtool --finish /usr/local/apr/lib' It seems everything is fine, but the error is not self-explanatory Could you guys help to understand where my error is? What am I missing? Thanks in advance for your support.

    Read the article

  • Howto - Running Redmine on mongrel as a service on windows

    - by Achilles
    I use Redmine on Mongrel as a project manager and I use a batch file (start-redmine.bat) to start the redmine in mongrel. There are 2 issues with my setup: 1. I have a running IIS on the server that occupies the HTTP port (80) 2. The start-redmine.bat must be periodically checked to see if it's stopped after a restart that is caused by windows update service. for the first issue, I have no choice but running mongrel on a port like 3000 and for the second issue I have to create a windows service that runs automatically in the background when the windows starts; and here comes the trouble! There are at least 3 ways to run redmine as a service that I'm aware of; none of them can satisfy a performance view on this subject. you may read about them on http://stackoverflow.com/questions/877943/how-to-configure-a-rails-app-redmine-to-run-as-a-service-on-windows I tried them all. The easiest way to setup such a service is using mongrel_service approach; in 3 lines of command you're done. but the performance is significantly lower than running that batch file... Now, I wanna show you my approach: First suppose we have ruby installed into c:\ruby and we have issued the command gem install mongrel to get the mongrel gem installed into c:\ruby\bin Also, suppose we have installed the Redmine into a folder like c:\redmine; and we have ruby's path (i.e. c:\ruby\bin) in our PATH environment variable. Now Download and install the Windows NT Resource Kit Tools from microsoft website. Open the command-line tool that comes with the Resource Kit (from start menu). Use instsrv to install a dummy service called Redmine using the following command: "[path-to-instsrv.exe]\instsrv" Redmine "[path-to-srvany.exe]\srvany.exe" in my case (which is the default case) it was something like this: "C:\Program Files\Windows Resource Kits\Tools\instsrv" Redmine "C:\Program Files\Windows Resource Kits\Tools\srvany.exe" Now create the batch file. Open a notepad and paste these instructions into it and then save it as "c:\redmine\start-redmine.bat" @echo off cd c:\redmine\ mongrel_rails start -a 0.0.0.0 -p 3000 -e production Now we need to configure that dummy service we had created before. WATCH OUT WHAT YOU'RE DOING FROM HERE ON, OR YOU MAY CORRUPT YOUR WINDOWS. To configure that service, open windows registry editor (Start - Run - regedit) and navigate to this node: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Redmine Right-Click on "Redmine" node and using the context menu, create a new key called Parameters (New - Key) Right-Click on "Parameters" and create a String Value property called Application. Do this again and create another String Value called AppParameters. Now Double-click on "Application" and put cmd.exe into "Value data" section. Then Double-click on "AppParameters" and put /C "C:\redmine\start-redmine.bat" into Value data section. We're done! issue this command to run the redmine on mongrel as a service: net start Redmine

    Read the article

  • Latex Inverse search from a pdf in Okular to TexMaker

    - by Kayton
    I am using TexMaker of Karmic Ubuntu with Okular. I use pdfLatex to compile and I view the PDFs in Okular. How can I configure Okular to inverse search with TexMaker? I have tried the following code: texmaker %f -line %l but it does not work. I have tried double clicking, ctrl+click, shift+click, ctrl+shift+click, ctrl+alt+click, alt+shift+click, still nothing. Perhaps I simply don't know what the action is to initiate the inverse search from within Okular. How can I configure Okular to inverse search with TexMaker?

    Read the article

  • ColdFusion 9 Cluster with IIS7.5

    - by Adam Winter
    Does anyone know of a step by step process of setting up a ColdFusion 9 cluster using IIS 7.5? Either failover or network load balance would be nice. Without IIS being clusterable in Windows 2008 R2, I'm not sure of the best means to configure the web server and ColdFusion service. Some of the things I'm looking for are..... With load balancing, what do you use out in front of the servers as a load balancer? If you're using a network share on a clustered file server for the website data files, how do you configure the ColdFusion service to run so that it has network access instead of running as Local System?

    Read the article

  • gcc 4.5 installation problem under ubuntu

    - by Claire Huang
    I tried to install gcc 4.5 on ubuntu 10.04 but failed. Here is a compile error that I don't know how to solve. Is there anyone successfully install the latest gcc on ubuntu? Following is my steps and the error message, I'd like to know where is the problem.... Step1: download these files: gcc-core-4.5.0.tar.gz gcc-g++-4.5.0.tar.gz gmp-4.3.2.tar.bz2 mpc-0.8.1.tar.gz mpfr-2.4.2.tar.gz Step2: Unzip above files Step3: move gmp, mpc, mpfr to the gcc-4.5.0/ directory. mv gmp-4.3.2 gcc-4.5.0/gmp mv mpc-0.8.1 gcc-4.5.0/mpc mv mpfr-2.4.2 gcc-4.5.0/mpfr Step4: go to gcc-4.5.0 directory and do configuration: sudo ./configure Step5: compile and install sudo make sudo make install The first 4 steps is OK, I can configure it successfully. However, when I try to compile it, following error message comes out, I cannot figure out what the problem is. Should I change the name from "gcc 4.5" to "gcc"?? It's a little strange that we need to do this by ourself. Is there anything I missed during the installation? xxx@xxx-laptop:/media/Data/Tool/linux/gcc 4.5/gcc-4.5.0$ sudo make [sudo] password for xxx: [ -f stage_final ] || echo stage3 > stage_final /bin/bash: line 2: test: /media/Data/Tool/linux/gcc: binary operator expected /bin/bash: /media/Data/Tool/linux/gcc: No such file or directory make[1]: Entering directory `/media/Data/Tool/linux/gcc 4.5/gcc-4.5.0' make[2]: Entering directory `/media/Data/Tool/linux/gcc 4.5/gcc-4.5.0' make[3]: Entering directory `/media/Data/Tool/linux/gcc 4.5/gcc-4.5.0' rm -f stage_current make[3]: Leaving directory `/media/Data/Tool/linux/gcc 4.5/gcc-4.5.0' make[2]: Leaving directory `/media/Data/Tool/linux/gcc 4.5/gcc-4.5.0' make[2]: Entering directory `/media/Data/Tool/linux/gcc 4.5/gcc-4.5.0' Configuring stage 1 in host-x86_64-unknown-linux-gnu/intl /bin/bash: /media/Data/Tool/linux/gcc: No such file or directory make[2]: *** [configure-stage1-intl] Error 127 make[2]: Leaving directory `/media/Data/Tool/linux/gcc 4.5/gcc-4.5.0' make[1]: *** [stage1-bubble] Error 2 make[1]: Leaving directory `/media/Data/Tool/linux/gcc 4.5/gcc-4.5.0' make: *** [all] Error 2

    Read the article

  • Remote access to apache2 server

    - by embedded
    Hi all, I'm trying to test my iPhone application on the device. I have a mac computer which stores my development environment. Right now I can only access PHP files using the http://localhost/PHPFileLocation which does not work when I try to test my app on real device. How do I configure apache2 to be accessible from outside? Is it possible to configure it to a specific IP address? I want to reach some php scripts located on my development machine running apache2 from my iPhone device. Thanks

    Read the article

  • Where is sdl-config installed on MacOS 10.6 (Snow Leopard)

    - by jmglov
    After installing SDL and SDL-devel in MacOS X 10.6 (Snow Leopard), trying to configure some source code that requires SDL yields: checking for sdl-config... no checking for SDL - version >= 1.2.0... no *** The sdl-config script installed by SDL could not be found *** If SDL was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the SDL_CONFIG environment variable to the *** full path to sdl-config. configure: error: *** SDL version 1.2.0 not found! Does anyone know where to find sdl-config? I guess I can build SDL from source, but why should I have to, when there exist pre-built packages?

    Read the article

  • Injecting generics with Guice

    - by paradigmatic
    I am trying to migrate a small project, replacing some factories with Guice (it is my first Guice trial). However, I am stuck when trying to inject generics. I managed to extract a small toy example with two classes and a module: import com.google.inject.Inject; public class Console<T> { private final StringOutput<T> out; @Inject public Console(StringOutput<T> out) { this.out = out; } public void print(T t) { System.out.println(out.converter(t)); } } public class StringOutput<T> { public String converter(T t) { return t.toString(); } } import com.google.inject.AbstractModule; import com.google.inject.Guice; import com.google.inject.Injector; import com.google.inject.TypeLiteral; public class MyModule extends AbstractModule { @Override protected void configure() { bind(StringOutput.class); bind(Console.class); } public static void main(String[] args) { Injector injector = Guice.createInjector( new MyModule() ); StringOutput<Integer> out = injector.getInstance(StringOutput.class); System.out.println( out.converter(12) ); Console<Double> cons = injector.getInstance(Console.class); cons.print(123.0); } } When I run this example, all I got is: Exception in thread "main" com.google.inject.CreationException: Guice creation errors: 1) playground.StringOutput<T> cannot be used as a key; It is not fully specified. at playground.MyModule.configure(MyModule.java:15) 1 error at com.google.inject.internal.Errors.throwCreationExceptionIfErrorsExist(Errors.java:354) at com.google.inject.InjectorBuilder.initializeStatically(InjectorBuilder.java:152) at com.google.inject.InjectorBuilder.build(InjectorBuilder.java:105) at com.google.inject.Guice.createInjector(Guice.java:92) I tried looking for the error message, but without finding any useful hints. Further on the Guice FAQ I stumble upon a question about how to inject generics. I tried to add the following binding in the configure method: bind(new TypeLiteral<StringOutput<Double>>() {}).toInstance(new StringOutput<Double>()); But without success (same error message). Can someone explain me the error message and provide me some tips ? Thanks.

    Read the article

  • How to set up hibernate to use Glassfish connection pool?

    - by jschoen
    I have set up a connection pool in Glassfish with a jndi resource for it also setup. I am stumped on how to configure hibernate to go get it. I have come across alot of write ups to configure it to use C3P0 connection pool. Well I am lost. I found that I need to set: hibernate.connection.datasource hibernate.jndi.url hibernate.jndi.class hibernate.connection.username hibernate.connection.password Would datasource be the same as the hibernate.connection.datasource set in the connection pool? What would hibernate.jndi.class be? Are hibernate.connection.username and hibernate.connection.password for the connection to the database or to the appserver? I assume this is to the database, but why do I need them since that is all set in the appserver?

    Read the article

  • NHibernate 2.1.2 in medium trust.

    - by John
    I'm trying to configure nhibernate 2.1.2 to run in medium trust, without any luck. I have tried follwing the suggestions to run in medium trust and pre-generating the proxies. I then tried to remove all references to lazy loading setting the default-lazy="false" on all classes and bags. However this threw an exception asking me to configure the proxyfactory.factory_class None of these methds worked as they kept throwing generic security exceptions or throwing easying that libraries do not allow AllowPartiallyTrustedCallers. Am I using the wrong version of NHibernate if I want to run in medium trust? Is there a specific set of binaries, or source, which I should be using.

    Read the article

  • How to build this project?

    - by Ali Shafai
    Hi, I've been a visual studio developer for long and just trying to understand how things are in linux/unix worl. I found an open source project (Gcomandos) in source forge and tried to build it. when I download the source, I get these files: 16/02/2007 05:16 PM 25,987 aclocal.m4 16/02/2007 05:17 PM 127,445 configure 16/02/2007 05:16 PM 1,925 configure.ac 17/03/2010 03:48 PM <DIR> gComandos 16/02/2007 05:16 PM 332 gcomandos.pc.in 25/11/2006 10:03 PM 9,233 install-sh 16/02/2007 05:16 PM 353 Makefile.am 16/02/2007 05:17 PM 20,662 Makefile.in 16/02/2007 05:16 PM 1,019 Makefile.include 25/11/2006 10:03 PM 11,014 missing I am now lost. I tried making the .am or the .in files, but GnuMake says there is nothing to make. I tried running the shell scripts, but I got errors. Any guidance appreciated.

    Read the article

  • Help to Install STLPort in VC6

    - by Yan Cheng CHEOK
    I try to follow the following steps to install STLPort in VC6 1) I change C:\Program Files\Microsoft Visual Studio\VC98\Bin\VCVARS32.BAT content set INCLUDE=%MSVCDir%\ATL\INCLUDE;%MSVCDir%\INCLUDE;%MSVCDir%\MFC\INCLUDE;%INCLUDE% set LIB=%MSVCDir%\LIB;%MSVCDir%\MFC\LIB;%LIB% to (The directory C:\STLport-5.2.1\lib is not exsits?) set INCLUDE=C:\STLport-5.2.1\stlport;%MSVCDir%\ATL\INCLUDE;%MSVCDir%\INCLUDE;%MSVCDir%\MFC\INCLUDE;%INCLUDE% set LIB=C:\STLport-5.2.1\lib;%MSVCDir%\LIB;%MSVCDir%\MFC\LIB;%LIB% 2) I C:\>cd C:\STLport-5.2.1\build\lib C:\STLport-5.2.1\build\lib>"c:\Program Files\Microsoft Visual Studio\VC98\bin\VCVARS32.BAT" Setting environment for using Microsoft Visual C++ tools. C:\STLport-5.2.1\build\lib>c:\STLport-5.2.1\configure.bat msvc6 STLport Configuration Tool for Windows The system cannot find the path specified. The system cannot find the path specified. The system cannot find the path specified. The system cannot find the path specified. The system cannot find the path specified. Setting compiler: Microsoft Visual C++ 6.0 The system cannot find the path specified. The system cannot find the path specified. The system cannot find the path specified. The system cannot find the path specified. The system cannot find the path specified. Setting platform: Windows XP The system cannot find the path specified. Done configuring STLport. Go to build/lib folder and type "nmake clean install" to build and install STLport to the "lib" and "bin" folders. Go to build/test/unit folder and type nmake clean install to build unit tests and install them in bin folder. 3) The code within configure.bat, which give me The system cannot find the path specified is REM initially create/overwrite config.mak echo # STLport Configuration Tool for Windows > build\Makefiles\nmake\config.mak echo # >> build\Makefiles\nmake\config.mak echo # config.mak generated with command line: >> build\Makefiles\nmake\config.mak echo # configure %1 %2 %3 %4 %5 %6 %7 %8 %9 >> build\Makefiles\nmake\config.mak echo # >> build\Makefiles\nmake\config.mak What I shall change them to? How can I continue the build? Thanks.

    Read the article

  • Autoconf (newbie) -- building with static library

    - by EB
    I am trying to migrate from manual build to autoconf, which is working very nicely so far. But I have one static library that I can't figure out how to integrate. That library will NOT be located in the usual library locations - the location of the binary (.a file) and header (.h file) will be given as a configure argument. (Notably, even if I move the .a file to /usr/lib or anywhere else I can think of, it still won't work.) Manual compilation is working with these: gcc ... -I/path/to/header/file/directory /full/path/to/the/.a/file/itself (Uh, I actually don't understand why the .a file is referenced directly, not with -L or anything. Yes, I have a half-baked understanding of building C programs.) I can use the configure argument to successfully find the header (.h file) using AC_CHECK_HEADER. Inside the AC_CHECK_HEADER I then add the location to CPFLAGS and the #include of the header file in the actual C code picks it up nicely. Given a configure argument that has been put into $location and the name of the needed files are myprog.h and myprog.a (which are both in the same directory), here is what works so far: AC_CHECK_HEADER([$location/myprog.h], [AC_DEFINE([HAVE_MYPROG_H], [1], [found myprog.h]) CFLAGS="$CFLAGS -I$location"]) Where I run into difficulties is getting the binary (.a file) linked in. No matter what I try, I always get an error about undefined references to the function calls for that library. I'm pretty sure it's a linkage issue, because I can fuss with the C code and make an intentional error in the function calls to that library which produces earlier errors that indicate that the function prototypes have been loaded and used to compile. I tried adding the location that contains the .a file to LDFLAGS and then doing a AC_CHECK_LIB but it is not found. Maybe my syntax is wrong, or maybe I'm missing something more fundamental, which would not be surprising since I'm a newbie and don't really know what I'm doing. Here is what I have tried: AC_CHECK_HEADER([$location/myprog.h], [AC_DEFINE([HAVE_MYPROG_H], [1], [found myprog.h]) CFLAGS="$CFLAGS -I$location"; LDFLAGS="$LDFLAGS -L$location"; AC_CHECK_LIB(myprog)]) No dice. AC_CHECK_LIB is looking for -lmyprog I guess (or libmyprog?) so I'm not sure if that's a problem, so I tried this, too (omit AC_CHECK_LIB and include the .a directly in LDFLAGS), without luck: AC_CHECK_HEADER([$location/myprog.h], [AC_DEFINE([HAVE_MYPROG_H], [1], [found myprog.h]) CFLAGS="$CFLAGS -I$location"; LDFLAGS="$LDFLAGS -L$location/myprog.a"]) To emulate the manual compilation, I tried removing the -L but that doesn't help: AC_CHECK_HEADER([$location/myprog.h], [AC_DEFINE([HAVE_MYPROG_H], [1], [found myprog.h]) CFLAGS="$CFLAGS -I$location"; LDFLAGS="$LDFLAGS $location/myprog.a"]) I tried other combinations and permutations, but I think I might be missing something more fundamental....

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >