Search Results

Search found 2588 results on 104 pages for 'dell'.

Page 76/104 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • Screen flicker -> Severe System Slowdown?

    - by Adam Robinson
    I'm using a Dell D830 laptop, and over the last few weeks it's been developing a very irritating screen flicker problem that leads to the system slowing down almost to the point of unusability. At seemingly random times (no commonality between how long the system has been running, what I was doing, what applications were open, etc.) my screen (I use two external LCD's with the laptop closed in a dock) flickers for a moment, then the system becomes incredibly slow. The screen redraws painfully slowly--almost like what you might expect to see with generic graphics drivers installed--and the entire system is maddeningly unresponsive. The only thing that seems to be able to correct the issue is a restart. I've checked the event logs and nothing out of the ordinary is there, and definitely nothing that's common to all of the events. I'm running XP Pro SP2. Any ideas?

    Read the article

  • ZFS SAS/SATA controller recommendations

    - by ewwhite
    I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS JBODs. In addition, how does battery-backed write cache (BBWC) play into the solution?

    Read the article

  • Connect server to router with workstation in between?

    - by letseatfood
    I have a server (9 yr old Dell with Ubuntu 10.04 Server Edition) and a workstation (Laptop with Vista) which are both connected to a router. The workstation is able to access the server via web browser for testing my web development projects. Since the server is old and does not have a wireless card, I am wondering if it is possible to connect the server directly to the workstation while maintaining the ability to connect to the server from the workstation. The reason is that the computers are in a separate room from the router and I am trying to limit the amount of wires on the floor, along with trying to avoid buying more hardware (like a wireless card). Thanks and I will be more than happy to clarify!

    Read the article

  • Accessing multiple local HD's or RAID with ESXi 4.0

    - by Shawn Anderson
    How to I get additional HD's to be recognized and used by ESXi 4.0. When I purchased my system I had two 2TB HD's, but when I installed ESXi it only recognized one of them. I'm happy to get whatever number of drives that I need (I have a four bay SATA in my Dell T310). What are some options? RAID? If so, is it supported. I guess I would need hardware instead of software since ESXi is so small. The VMWare forums (where I've lived for the last two days) are a charlie foxtrot of outdated and conflicting info. I want to utilize my T310, with 32 GB RAM, 2.8GHz quad core to run many lab Windows VM's. I don't need production level availability but I do want decent performance, even though it's in a lab environment. A huge thanks to Jim B., Zypher, Helvick, and Jeff Hengesbach who posted answers to my earlier predecessor question on why ESXi was so sluggish.

    Read the article

  • VGA no signal on LCD monitor attached to laptop

    - by Paul
    I bought a new Asus vh242h LCD monitor for use with my lenevo T60 laptop running XP professional. Display info under control panel says "Intel(R) 945GM Express Chipset Family". I am connecting via VGA. When I connect the monitor I get "VGA no signal" and the monitor screen stays blank. I have selected the monitor as the display device on the laptop. The information on the monitor displays the correct screen resolution from the laptop, so the monitor is communicating in some way with the laptop. I've successfully tried the monitor with my Dell inspirion 1525 running Windows Vista. I've change the VGA cable to one I know works. Tried different resolutions. I cannot find and specific drivers on the internet for this monitor, so I assume it should work with Plug and Play. Does anyone know what the problem could be?

    Read the article

  • Can't double click files to open them in inDesign (CS5)

    - by Matt
    I cannot open a file unless I open inDesign (the program) and then do File-Open If I double click, it starts to open, then just hangs forever. AFTER I close it, and look in the directory where they're saved, I see a (temporary?) "lock" file. Now I can double click the original file and it opens just fine. However, now when I close iD it deletes the file and the whole process starts again... I have tried updating the software, uninstalled COMPLETELY and reinstalled, tried a brand new Win7 install. These files are all saved on a network drive, the computer is a new quad-core Dell with 12GB of RAM and a fresh x64 Win7 install on the SSD. Does not happen with other programs.

    Read the article

  • Bad Resolution. Running Three screens at the same time

    - by Carl
    Hi I am currently using three screens at the same time with my ATI 5770 & an active displayport converter. The thing is that the third screen ( the one that is using the active displayport converter ) is showing terrible resolution compared to my other two screens. ( Samsung syncmaster p23 ) two of my screens got a max resolution of 1920* 1090, meanwhile the third on is only capable of 1600 * 1200. Do any of u guys got any solution to this problem? Btw, This is how the Active Displayport converter looks like http://accessories.us.dell.com/sna/products/Cables/productdetail.aspx?c=us&l=en&s=dhs&cs=19&sku=330-5521#Overview

    Read the article

  • Screen tearing with GeForce 550 Ti

    - by Konair0s
    Recently I switched to the new monitor and graphic card - DELL U2312HM and GeForce GTX 550 Ti. I have problems with screen tearing (like in this picture from Wikipedia). Usually it is somewhere in upper part of the screen. Mainly happens in videos (in flash videos tearing heavier). In games all fine, except in-game videos (sometimes even videos built on game engine), but gameplay itself is clear, even in very fast actions. Connection with DVI. Problems both in Linux (Debian GNU/Linux, openSUSE 12.1, Linux Mint 13) and Windows (Windows XP, Windows 7), with various driver versions. 1920x1080, 60Mhz. How can I resolve this?

    Read the article

  • Access is denied while moving a file from different volumes

    - by logeeks
    i have a portable 500GB HDD plugged into my dell xps system. The system have windows 7 professional edition. the problem is that when i try to open a file(visual studio .sln file) it is saying that access is denied. I cannot copy this file to a different location(within my local HDD) it is saying that i need permission for the task to complete. I've checked and confirmed the following things 1) I've logged into an admin account before attempting these operations 2) My admin account have 'Full Control' 3) I've full control over the portable HDD 4) I changed the 'UAC' settings to 'Never notify' Please help.

    Read the article

  • Computer prints blank pages before and after content

    - by Cpt. Jack
    This would seem like a pretty simple question but I have exhausted every idea I can come up with. I bought a brand new Dell Latitude E5410 not too long ago with Windows 7 OS. I installed office 2010 on the machine right away and have had a printing problem since day one. For some reason every time I print a page, a blank page prints out before and after the content print. This also applies to any other application such as notepad or printing an email. If I have a 6 page document, it still prints out one page before and after every content page. Meaning I get my 6 page document along with 12 blank pages. I can't figure out why this would be some sort of default setting or what would cause this printing configuration. I am the only computer on the network that has this problem and quite frankly I'm getting tired of it. Can anyone help me figure this out or steer me in the right direction to correcting this problem?

    Read the article

  • Can't connect Alienware M11x wireless to internet thru families router

    - by Jim Kron
    Morning All, Have an Alienware M11x loaded with Win 7 Premium with the Dell half card wifi. Also have a Netgear and Belkin USB external adapters (b/g and N to include dual radios. No joy either. Families Internet is served thru Charter and they use a Motorola Router. No matter if we reset the router, I cannot connect to the Net but can talk to the router. BTW... my brother only uses WEP as a number of connected items are old and my folks are not in a high threat area for attacks. Frustrated, as I know what I'm doing but this really has me stumped. Any thoughts? Much appreciated, Jim

    Read the article

  • pfsense CARP - wan failure on firewall

    - by eldblz
    I have recently configured 2 firewall (on 2 DELL PowerEdge R210II with ESXI 5.1) with pfsense. We have several LANs and 2 WANs. Everything is running fine but i have a strange behavior: i can access internet from alla LANs but not from the firewall (itself). For example the firewall cannot retrive package information or if i setup a gatway monitor ip (like google 8.8.8.8 ) this fails. These are the screenshots of firewall configuration: http://imgur.com/a/LNuMz#0 ATM i kept firewall rules to minimum to avoid problem or conflicts. Any ideas how to solve the problem? Thank you in advance.

    Read the article

  • Windows Server 2008: Terminal Services / VDI

    - by JohnyD
    I have a Dell R710 with 72GB of memory running Hyper-V. Within Hyper-V I have a Windows 2008 (32-bit) VM running Terminal Services. How do I allocate memory so that any user who connects to this Terminal Server (from their thin-client) is allocated 2GB (or whatever amount I choose) of memory? Currently I have provisioned the TS with 2GB of memory but it seems that this is shared among all that connect. Please let me know if there is further information I can provide. Thank you. Update 1: What I'm looking to accomplish with this server is setting up a VDI to allow users to connect from thin-clients from within our network. They will also have to connect from outside our network via VPN which is already in place. Am I able to set this up using Windows Server 2008 (not R2) because I have a 16-bit application which needs to be supported. Unfortunately it's not a candidate as a Remote App.

    Read the article

  • Darik's Boot And Nuke - ERROR /dev/sda

    - by user1403844
    I'm trying to wipe the drive of an old company computer with DBAN so I can install Redhat Enterprise and learn Linux (it's a Dell Inspiron 1210, if that matters). I burnt DBAN to a CD and boot from that CD (running on an external USB CD drive). Whenever I try to run the utility--whether it's Autonuke, or any of manual wiping methods-- it spits on the errors: ERROR /dev/sdb ERROR /dev/sda From what I've read on some other forums, there are some issues with other drives or removable media interfering however I've disabled all other drives in bios, leaving just CD/DVD and the Hard Disk but still no luck. Any advice on how I can reconcile these errors and wipe the disk?

    Read the article

  • Bad sound quality of 3.5mm headphone with mic on laptop

    - by Isaac
    I have a set of headphones that have a built-in mic for hands-free calling. They just work great on my Sony Ericsson Cedar cellphone. The problem is that when I connect headphone to my Dell N5010 laptop to listen to music, the quality is horrible, with very weak or no vocals. They funny part is when I hold down the talk button on the mic (headphone mic), at which point it sounds great, but goes back to bad quality as soon as I release talk button. Also, when I take out the jack a little, at some point, the sound is great but I have to hold the jack there. I looked for any configuration on the sound card driver but find nothing. Besides using a glue to hold down the talk button of mic :), is there any other solution?

    Read the article

  • Using Remote Desktop, connect to a Windows 7 domain user account without first logging on locally?

    - by calavera
    I have a dell laptop (henceforth we'll call this the server) running Windows 7 Enterprise. The server is part of my company's domain. My primary user account is a domain account. When I am at home and not connected to the domain, I prefer to connect to the server using Remote Desktop Connection from my MacBook Pro (we'll call this the client). The problem is, that if I do not physically login to the server, I am unable to connect to it using RDC from the client. I have a local administrator account on the server, and connecting to it via RDC works just fine. I had a feeling that the Mac RDC application was not giving me the full story, so I attempted the same procedure from a Windows 7 client. When trying to login, I get this message: So basically, If I logon to the server physically with my domain user and lock the computer, I can then successfully logon from the client. Otherwise, I am unable to connect.

    Read the article

  • Windows7 access to Printer shared with XP ?

    - by chmike
    I have, at home, an eeebox running with XP 24/24 with an attached printer (Canon IP5300) installed as shared. We have a few other laptops and PC, all with vista, that can access and print on the shared printer without problem. We just received a new Dell computer with Windows7-64 on it, but it fails to connect the shared printer. I tried connecting the printer with its USB cord directly to the Windows7 PC and the required driver was automatically downloaded and installed. I could then access the printer specific properties, etc. But if I connect it back to the XP computer, the windows7 PC still refused to connect to the remote printer although it now have the drivers. The windows7 is a family pack. By the way, I also have an old canon scanner still perfectly working with XP, but for which I can't find compatible drivers for windows 7. Do I have to buy a new one ? Any help would be welcome.

    Read the article

  • RHEL kickstart with external DVDrom drive

    - by AndyM
    HI I've an old Dell poweredge server with an CDROM drive. I've attached a USB DVDROM and USB stick with my ks.cfg on so I can install RHEL from DVD not loads of CDs :-) I can boot from the RHEL media in DVDROM and point the installer to the USB ks.cfg. This works but the ks.cfg script has the cdrom keyword in it. The install then stops and asks for the RHEL media to be in the CDROM drive not the DVDROM. How can I change the ks.cfg so it uses the external DVDROM for the install media not servers builtin cdrom drive ? I know I can go and rebuild my DVD image to include the ks.cfg , but this is an extra step I dont want to do if I have to. Regards Andy

    Read the article

  • Using off-the-shelf hardware for brand-name servers; Possible? Good idea?

    - by threecheeseopera
    Is it possible or advisable to use 'regular' not-sanctioned-by-the-server-manufacturer hardware in high end servers? Often these manufacturer-supplied parts have a very high price markup, and I wonder if it's always necessary (understanding that they probably apply more rigorous requirements to this hardware). For example, Dell sells 300GB 15,000rpm serial-attached scsi drives for a certain server family for almost $600 each, while newegg sells a drive with the same specs for almost half the price http://www.newegg.com/Product/Product.aspx?Item=N82E16822116059. Do we really need to pay these high markups, especially for disks that are likely RAID-ed and so guarded against catastrophic failure?

    Read the article

  • Artefacts during HDV capture

    - by Jakub Konecki
    When I try to capture HDV video stream from a Canon HV20 camera to a Dell Studio 1558 (Intel i7 720qm) laptop running Win 7 Home Premium x64, the image appears with a very annoying noise - it contains block artefacts. Something is wrong with the Fire Wire controller (Ricoh 1304 OHCI host controller, build-in). Tried changing the driver to legacy one to no avail. This does not happen with DV stream. I'm using a Belkin cable. The capture works OK on another machine.

    Read the article

  • Windows Server 2008: Terminal Services

    - by JohnyD
    I have a Dell R710 with 72GB of memory running Hyper-V. Within Hyper-V I have a Windows 2008 (32-bit) VM running Terminal Services. How do I allocate memory so that any user who connects to this Terminal Server (from their thin-client) is allocated 2GB (or whatever amount I choose) of memory? Currently I have provisioned the TS with 2GB of memory but it seems that this is shared among all that connect. Please let me know if there is further information I can provide. Thank you.

    Read the article

  • Why does MTP work on one machine, but not another?

    - by bobmcn
    I have two Dell computers, a laptop and a desktop. I reinstalled Windows XP home on both, from the same CD. Then I installed Service pack 3 and ran windows update. When I connect my Creative Zen media player to the desktop, the MTP software that is part of XP recognizes it, and I can copy file to and from it using Windows Explorer. But when I connect the same player with the same cable to the laptop, I can see it in Windows Explorer, but none of the folders that are visible via the desktop are available, and I can't copy anything to or from it. How can I get this working on the laptop?

    Read the article

  • Help me find the offending process waking my Windows 7 PC from hibernate every night

    - by DavidGugick
    Recently my Windows 7 64-bit PC has started waking every night from hibernation around 3:30am. I have done the following to try and figure out what is causing the issue with no luck: Examined the Windows Event logs. Nothing is noted Ran powercfg -lastwake and that reports nothing c:\powercfg -lastwake Wake History Count - 1 Wake History [0] Wake Source Count - 0 Ran powercfg to find what devices are armed for wake. Interestingly, this reports two items (I've already unchecked the "Allow this device to wake the computer" in device manager): The keyboard and something called the "eHome Infrared Receiver (USBCIR)". This is a desktop PC and it does not have an Infrared received, so I'm not sure what that device is. Suffice to say it does not have the option to "Allow device to wake..." available in Device Manager. C:\powercfg -devicequery wake_armed eHome Infrared Receiver (USBCIR) HID Keyboard Device My next step is to disable the Keyboard from wake, but I'm not convined that's the problem. This is on a Dell XPS435 if that helps anyone.

    Read the article

  • Using Remote Desktop, connect to a Windows 7 domain user account without first logging on locally?

    - by Robert S Ciaccio
    I have a dell laptop (henceforth we'll call this the server) running Windows 7 Enterprise. The server is part of my company's domain. My primary user account is a domain account. When I am at home and not connected to the domain, I prefer to connect to the server using Remote Desktop Connection from my MacBook Pro (we'll call this the client). The problem is, that if I do not physically login to the server, I am unable to connect to it using RDC from the client. I have a local administrator account on the server, and connecting to it via RDC works just fine. I had a feeling that the Mac RDC application was not giving me the full story, so I attempted the same procedure from a Windows 7 client. When trying to login, I get this message: So basically, If I logon to the server physically with my domain user and lock the computer, I can then successfully logon from the client. Otherwise, I am unable to connect.

    Read the article

  • My KDE very slow in certain operations

    - by Pietro
    I have a problem with my Linux installation. It seems that the KDE code that deals with directory windows is extremely slow (on both Dolphin and Konqueror). This happens both when I click on a directory icon and when I want to open/save a file from many KDE applications. The time the window takes to open can be one minute or more. The same happens when I right click on an icon. Looking at the CPU usage, this is very low (less than 10%). Am I the only one with this problem, or is it well known and maybe already fixed? Consider that I cannot update to a more recent version of OpenSuse. Thank you, Pietro Configuration: Linux version: OpenSuse 11.4 KDE 4.6.0 System: DELL Precision T3500 - Intel Xeon Home directory mounted on a remote drive. <-- could this be the reason?

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >