Search Results

Search found 4066 results on 163 pages for 'intel x25'.

Page 76/163 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• Using the Onboard VGA output with a PCIe video card. Both nVidia

  - by sebikul

  I have 2 video cards, one On board, a nVidia 6150SE nForce 430 and a PCIe nVidia GeForce GT 220 1GB DDR2 RAM I have already configured the PCIe card to use the dual monitor feature, using the VGA and HDMI ports, but now I want to add a third monitor, using the On board VGA port I have managed to enable the On board graphics processor, which is taking 400MB of ram, but I cant manage to use it, nvidia-settings does not detect it, like it's not usable (but is there) My questions are the following: How can I manage to get the On board VGA display to work together with the PCIe graphics card? If possible, how can I recover those 400 MB the on board card is taking (even without being used) or how can I get it to use the PCIe card available memory? System Details: Linux 2.6.35-28-generic i686 Ubuntu 10.10 (All updates installed) NVIDIA Driver Version: 260.19.06 (Official) If more info is needed please let me know. Here is the lspci output when the On board card is disabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) And this is when both are enabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) Output of lshw -class display: *-display description: VGA compatible controller product: GT216 [GeForce GT 220] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:02:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:df000000-dfffffff memory:c0000000-cfffffff memory:da000000-dbffffff ioport:ef80(size=128) memory:def80000-deffffff *-display description: VGA compatible controller product: C61 [GeForce 6150SE nForce 430] vendor: nVidia Corporation physical id: d bus info: pci@0000:00:0d.0 version: a2 width: 64 bits clock: 66MHz capabilities: pm msi vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:22 memory:dd000000-ddffffff memory:b0000000-bfffffff memory:dc000000-dcffffff memory:deb40000-deb5ffff If what I'm looking for is not possible, please tell me, so I can disable the On board card and recover those 400MB of wasted RAM Thanks for your help!

  Read the article

• How to Watch NCAA March Madness Online

  - by DigitalGeekery

  You’ve filled out your brackets and now you are ready for one of America’s most popular sporting events. But what if you are you stuck at work or away from your TV?  Or your local affiliate is showing a different game? Today we show how to catch all the March Madness online. March Madness on Demand You’ll need a broadband connection, 512 MB RAM or higher, with cookies and Javascript enabled in your browser. March Madness on Demand offers two viewing options, a Standard Player and a High Quality player. The High Quality player is not, unfortunately, high definition. Standard Player Requirements Windows XP/Vista/7 or Mac OS X IE 6+ (We also successfully tested it in Firefox, Chrome, & Opera) Adobe Flash Player 9 or higher High Quality Player Requirements 2.4 GHz Pentium 4 or Intel-based Macintosh Mac OS 10.4.8+ (Intel-based) Windows: XP SP2, Vista, Server 2003, Server 2008, Windows 7 Firefox 1.5+ or IE 6/7/8 Silverlight 3 browser plug-in Watching March Madness on Demand Go to the March Madness on Demand website. (Link below) Check the “Watch in High Quality” section to see if your browser is ready and compatible for the High Quality viewer. If not, you’ll see a message indicating either your browser and system are incompatible… Or that you need to install Silverlight. To install Silverlight, click on the “Get HQ” button and follow the prompts to download and install Silverlight. To launch the player, click the large red “Launch Player” button. At the top of the screen, you’ll see the current and upcoming games. Click on “Watch Now” below to begin watching. At the bottom left, is where you click to watch with the High Quality player. If to many people are watching the High Quality player, you’ll see the following message and have to go back to the Standard Player. At the lower right are volume controls, a “Full Screen” button, and a “Share” button which allows you to share the game you are watching on various social networking sites like Facebook and Twitter. Perhaps most importantly for those who want to steal a bit of viewing time while at work is the “Boss Button” at the top right. Clicking on the “Boss Button” will open a fake Office document so it may appear at first glance like you’re actually doing legitimate work. To return to the game, click anywhere on the screen with your mouse. You’ll be able to catch every single game of the tournament from the first round all the way through the championship with March Madness on Demand. If your computer and Internet connection can handle it, you can even watch multiple games at the same time by opening March Madness on Demand in multiple browser windows. Watch March Madness online Similar Articles Productive Geek Tips Weekend Fun: Watch Television on Your PC with AnyTVWatch NFL Sunday Night Football On Your PCWatch TV On Your PC with FreeZ Online TVGeek Fun: Download Favorite NBC Programs for FreeDitch the RealPlayer Bloat with Real Alternative TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional How to Browse Privately in Firefox Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet

  Read the article

• Installation problem Ubuntu 12.04 Crashing hardware error

  - by user93640

  I am running on Ubuntu 8.04 for quite some time without many problems. About almost a year ago or so I have been trying to upgrade to 10.04 LTS, but without any success. Each time when trying to upgrade or even newly install the installation process crashed after about an hour or so (I forgot exactly how long). Now I wanted to try Ubuntu 12.04 (not even installing, but I only selected "Try Ubuntu without installing") and I got similar errors. I did not try to install it, because of earlier experience with 10.04 when after I also lost 8.04 and had to install from scratch again (after which it worked). I get the following screen (as I am not allowed to upload photos here the text): 26.767262] [Hardware Error]: CPU 0: Machine Check Exception: 0 Bank 5: b200001804000e0f 26.767279] [Hardware Error]: TSC 0 26.767287] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 0 microcode 44 26.767297] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767307] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 1: b200000000000175 26.767316] [Hardware Error]: TSC 0 26.767323] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767331] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767339] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 5: b200003000000e0f 26.767348] [Hardware Error]: TSC 0 26.767354] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767363] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767371] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 1: b200000000000175 26.767379] [Hardware Error]: TSC 1bf231e65f 26.767386] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767395] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767403] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 5: b200003008000e0f 26.767413] [Hardware Error]: TSC 1bf231e65f 26.767421] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767429] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767437] [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 5: b200001806000e0f 26.767447] [Hardware Error]: RIP |INEXACT| 60:<00000000c1018b5c> {mwait_idle+0x7c/0x1d0} 26.767464] [Hardware Error]: TSC 1bf231e674 26.767471] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 0 microcode 44 26.767480] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767487] [Hardware Error]: Machine check: Processor context corrupt 26.767495] Kernel panic - not syncing: Fatal Machine check 26.767505] Pid: 579, comm: debconf-communi Tainted: G M 3.2.0.29-generic-pae #46-Ubuntu 26.767515] Call Trace: 26.767525] [<c158f812>] ? printk+0x2d/0x2f 26.767534] [<c158f6e0>] panic+0x5c/0x161 26.767542] [<c10247ef>] mce_panic.part.14+0x13f/0x170 26.767551] [<c1024872>] mce_panic+0x52/0x90 26.767558] [<c1024a18>] mce_reign+0x168/0x170 26.767565] [<c1024bb5>] mce_end+0x105/0x110 26.767572] [<c10252db>] do_machine_check+0x32b/0x4f0 26.767581] [<c1024fb0>] ? mce_log+0x120/0x120 26.767590] [<c15a5e47>] error_code+0x67/0x6c 26.767602] panic occurred, switching back to text console 26.768498] Rebooting in 30 seconds.. For information, I have also tried earlier Arch Linux. I can install it, but when I try to install a window manager (LXDE) again I got similar errors. Fedora also crashes when installing and also Mandriva did not work for me. Therefore I think something deep in the machine might be wrong. But as stated above I can (clean) install 8.04 and also 9.10 can be installed without problems. Also updates for 8.04 can be installed. My machine is dual boot with XP next to it on a different partition. My HW: Memory : 2.0 GiB; Processor 0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; Processor 1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; How can I install Ubuntu 12.04? Last option would be to completely format my machine and install everything from scratch, but even I am not sure if that would solve it in the end. Can anybody help me out?

  Read the article

• How to set default xrandr settings?

  - by echo-flow

  I'm trying to enable dual monitors in Ubuntu. This is working fine, but every time I do it, desktop effects is disabled. I think I've found the reason why, though: https://wiki.ubuntu.com/X/Config/Multihead/ As with the GNOME XRandR configuration method, setting Virtual to too large a value may result in a loss of hardware acceleration, and thus an inability to use Compiz and its desktop effects. When I use the GNOME monitor applet, or the Monitors configuration in the System menu, the default xrandr settings puts the second monitor to the right of the first, and, as I found with this bug, for most monitors this creates a virtual desktop larger than the maximum 2048 horizontal resolution needed for hardware acceleration on my netbook hardware. So, it seems like if I can modify xrandr's default settings so that it places the new desktop above or below (north or south of) the main LVDS display, then hardware acceleration, and therefore compiz will continue to work. Can anyone tell me, what is the easiest way to achieve this? UPDATE: I have confirmed that multihead support with desktop effects and hardware acceleration works when I move the external monitor display north of the main LVDS display. Right now this involves the following process: plugging in the external monitor, starting the Monitors configuration menu, desktop effects are disabled automatically (and all of the windows on my workspaces are moved to the first workspace), repositioning the external display so that it is north of LVDS display and clicking apply, and then navigating to the Appearance menu and telling it to reenable desktop effects. Is there a simpler way do this? UPDATE 2: OK, so I thought that perhaps the GNOME Monitors configuration screen was trying to be clever, and might be disbling desktop effects. So, I just tried using the xrandr command-line client instead, as follows: xrandr --output VGA1 --above LVDS1 When I do that, desktop effects are still disabled, and I need to manually reenable them. This, despite the fact that hardware acceleration works, and there is never a point where hardware acceleration stops working because the horizontal dimension of the virtual display is too large. So what program is trying to be clever, and is turning off desktop effects when it doesn't need to? And how do I make it stop? If there were a way to re-enable desktop effects from the command line, which I could then put into a script along with the proper xrandr invocation, I would accept that as a workaround. UPDATE 3: OK, here's my script to enable a second monitor with desktop effects. It might be evil, I'm not sure: second-monitor.sh xrandr --output VGA1 --above LVDS1 sleep 3 compiz --replace & The sleep statement might not be necessary. If there's a better way to do this, please let me know. UPDATE 4: This is a Dell Mini Inspiron 1012. Here are my system specifications: lspci -vv 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: Dell Device 041a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at f0b00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 18d0 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f0900000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: Dell Device 041a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f0b80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> lsmod | grep i915 i915 287458 2 drm_kms_helper 29329 1 i915 drm 162409 3 i915,drm_kms_helper intel_agp 24375 2 i915 i2c_algo_bit 5028 1 i915 video 17375 1 i915

  Read the article

• Ubuntu 11.04 and 10.04 hang with black screen while installing from USB disk

  - by Bill

  I've been trying to install Ubuntu 11.04 from a USB flash stick and each time I try to boot from the USB key one of two things happen: A) The screen that asks you what you would like to do (e.g. run Ubuntu from the USB key or install it) shows up and the countdown to the default option starts to count down but as soon as I either touch the keyboard (sometimes I press enter or the arrow keys to select an option) or the countdown gets to zero the screen just locks up and nothing happens no matter how long I wait. B) When I boot from the USB key the screen will flicker for a second and then go black with a flashing white underscore at the top left corner of the screen. Again it doesn't matter how long I wait, nothing happens and pressing keys doesn't do a thing. The very first time I tried to install it I got a terminal-like screen that said something about a directory called 'casper' having an error of some sort. I have tried installing from USB using both 11.04 and 10.10. I'm about to try 10.04. I have read tons of forum posts about this but so far I haven't seen anything in the solutions that apply to me. My intention is to dual boot Windows 7 and Ubuntu. I must keep Windows as I am required to use Visual Studio for one of my college courses. Right now I'm using Wubi but I really want a full install. I can't use LVPM because it doesn't work with the version of Wubi I used. So now I'm thinking my best bet is to try to get a clean install working. I'd also convert Wubi to a full install too but there's no solution as far as I've read. So could someone tell me a reason why this is happening or if there's something I can do to get around the problem? I'm using a Gateway LT2802u netbook with and Intel Atom N455 processor, 1GB RAM, Intel Graphics Media Accelerator 3150 graphics card, and a 250GB HDD. I don't have anything on my current Wubi install that I can't replace so keep in mind when answering that I don't care if I lose my current settings and files from Wubi. Thanks everyone! UPDATE I just answered my own question so in case anyone else is having this same problem using similar hardware, do the following: When I first tried installing 11.04 I used the recommended universal installer tool to create the USB live/installation disk. That caused the original problem. Note that I had already downloaded the 11.04 ISO and did not use the included downloader from the USB creator. After that failed I used the same USB creator but had it download 10.10 for me. It also failed with the same issue. I repeated this process with unetbootin as well for both versions. Finally, I downloaded the Ubuntu 10.04 ISO and used the recommended USB creator once again. There was an error while creating the USB live install so I reformatted the USB key as FAT32 and tried again. It created the USB key. I then booted from the USB flash drive and selected "Install Ubuntu" (exact wording was different). It worked! It took me through the process that you see shown in pictures on the Ubuntu website. I let it create the appropriate partitions for me and it simply worked. I did get a few errors while the system tried to restart after it installed. It hung on a terminal-like screen but I pressed ENTER and it restarted. I booted into Windows 7, it checked the disks as it sensed that I messed with a partition, then it booted into Windows normally. Now I'm going to uninstall Wubi and update my new full install of Ubuntu! I'm excited to get the benefits of a full install now. So in the end, hopefully someone can learn from what I did.

  Read the article

• Integrated webcam in lenovo t410 not working with 12.04

  - by kristianp

  I have a Lenovo T410 with an inbuilt webcam and I haven't been able to get the webcam working. I tried skype, cheese, both just give me a black window. The microphone works fine with skype, by the way. Can anyone provide any clues please? The webcam is enabled in the bios, but there is no light indicating the webcam is on (not sure if there should be, though). I tried this on Kubuntu 11.10 and have upgraded to 12.04 with the same results. The Fn-F6 keyboard combination doens't seem to do anything either. EDIT: I got the webcam replaced, it looks like it was a hardware problem, because it works fine now. Thanks guys. $ ls /dev/v4l/* /dev/v4l/by-id: usb-Chicony_Electronics_Co.__Ltd._Integrated_Camera-video-index0 /dev/v4l/by-path: pci-0000:00:1a.0-usb-0:1.6:1.0-video-index0 And lsusb: $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 005: ID 17ef:480f Lenovo Integrated Webcam [R5U877] Bus 002 Device 003: ID 05c6:9204 Qualcomm, Inc. Bus 002 Device 004: ID 17ef:1003 Lenovo Integrated Smart Card Reader Here is the output from guvcview, minus lots of lines describing the available capture formats. It says "unable to start with minimum setup. Please reconnect your camera.". guvcview 1.5.3 ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, .... { discrete: width = 1600, height = 1200 } Time interval between frame: 1/15, vid:17ef pid:480f driver:uvcvideo checking format: 1196444237 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } .... vid:17ef pid:480f driver:uvcvideo checking format: 1448695129 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! ERROR: Minimum Setup Failed. Exiting... VIDIOC_REQBUFS - Failed to delete buffers: Invalid argument (errno 22) cleaned allocations - 100% Closing portaudio ...OK Terminated.

  Read the article

• Atheros AR9485 wireless card doesn't work in an ASUS K53E

  - by John

  I just installed Ubuntu 11.10 32-bit version in dual boot mode on an ASUS K53. Every thing seems to work fine except for the wireless. The wireless works on Windows 7. Ubuntu finds the wireless card, but it does not appear to be turned on. The only physical means of turning on the card is the FN-F2 key combo. That works on Windows, but not in Ubuntu. I've looked in the forums for a solution and I'm not quite sure what to do. I've gathered the following information: jdwbmc@Spatha:~$ cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" Linux Spatha 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux jdwbmc@Spatha:~$ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: AzureWave Device [1a3b:1186] Kernel driver in use: ath9k -- 04:00.0 Ethernet controller [0200]: Atheros Communications AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) Subsystem: ASUSTeK Computer Inc. Device [1043:1851] Kernel driver in use: atl1c jdwbmc@Spatha:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 058f:a014 Alcor Micro Corp. jdwbmc@Spatha:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff jdwbmc@Spatha:~$ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no jdwbmc@Spatha:~$ lsmod Module Size Used by parport_pc 32114 0 ppdev 12849 0 snd_hda_codec_hdmi 31426 1 bnep 17923 2 rfcomm 38408 0 bluetooth 148839 10 bnep,rfcomm snd_hda_codec_realtek 254125 1 binfmt_misc 17292 1 joydev 17393 0 asus_nb_wmi 12469 0 asus_wmi 19333 1 asus_nb_wmi sparse_keymap 13658 1 asus_wmi uvcvideo 67271 0 videodev 85626 1 uvcvideo snd_hda_intel 24262 2 snd_hda_codec 91754 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80468 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 wmi 18744 1 asus_wmi snd_rawmidi 25241 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event arc4 12473 2 i915 505108 3 snd_timer 28932 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq ath9k 112711 0 psmouse 73673 0 serio_raw 12990 0 mac80211 272785 1 ath9k drm_kms_helper 32889 1 i915 ath9k_common 13599 1 ath9k drm 192226 4 i915,drm_kms_helper ath9k_hw 293893 2 ath9k,ath9k_common ath 19387 2 ath9k,ath9k_hw cfg80211 172392 3 ath9k,mac80211,ath snd 55902 14 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,s nd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm mei 36466 0 i2c_algo_bit 13199 1 i915 video 18908 1 i915 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp ahci 21634 3 libahci 25727 1 ahci atl1c 36638 0 xhci_hcd 72915 0 jdwbmc@Spatha:/var/lib/NetworkManager$ cat NetworkManager.state [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true jdwbmc@Spatha:~$ lspci -nn | grep 0280 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) Any help would be appreciated. Thanks.

  Read the article

• Why does Ubuntu only detect one USB LAN adapters at a time?

  - by EGO

  I try to connect real switch with my computer for an exam preparation, for this purpose I need more than one LAN cards, and there is only one built in LAN card in my computer. So, to get more LAN cards, I bought 4 USB Ethernet adapters (as I have 4 usb ports in may laptop 2 usb 2.0 ports, 2 usb 3.0 ports). When I plug these adapters in my computer Ubuntu only detects one LAN card from 2.0 usb ports, and one LAN card from 3.0 ports. And sometimes detects only one USB LAN from all the usb ports. Actually the real problem is Ubuntu shows these USB LAN adapters in the "lsusb", but does not list them in "ifconfig". Kontron (Industrial Computer Source / ICS Advent) is my LAN USB ethernet. abc@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 001 Device 003: ID 138a:0018 Validity Sensors, Inc. Bus 001 Device 004: ID 064e:e258 Suyin Corp. Bus 003 Device 011: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 013: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 003 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 005: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR -- etho is my built in LAN card, while eth1 is the only USB LAN card that ubuntu has detected. abc@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 2c:27:d7:a5:d2:39 inet6 addr: fe80::2e27:d7ff:fea5:d239/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:21056 errors:0 dropped:1 overruns:0 frame:0 TX packets:5669 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1407289 (1.4 MB) TX bytes:372566 (372.5 KB) Interrupt:49 Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:e0:4c:53:44:58 inet6 addr: fe80::2e0:4cff:fe53:4458/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9230 errors:0 dropped:0 overruns:0 frame:0 TX packets:9230 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:557648 (557.6 KB) TX bytes:557648 (557.6 KB) wlan0 Link encap:Ethernet HWaddr cc:52:af:5e:78:05 inet addr:192.168.1.65 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::ce52:afff:fe5e:7805/64 Scope:LinkU UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17389 errors:0 dropped:0 overruns:0 frame:0 TX packets:12231 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22452248 (22.4 MB) TX bytes:1502750 (1.5 MB) If I unplug the USB LAN card which Ubuntu has detected, then Ubuntu will detect a USB LAN card from the remaining plugged adapters, and process go on untill I plug all the USB LAN adapters. Looking for some urgent help. Thanks

  Read the article

• Need help with chronic slow wifi connections

  - by mgeorge

  I have had chronic slow wifi connections on several networks for a while now, I think since my update to 12.04 when it came out. I have tried many of the tips and tricks already available out there in the forums with no luck (wicd, etc..). I want to see if any of you experts out there might be able to help me, and thanks in advance!! I use ubuntu 12.04 on a lenovo ideapad y650, and most networks I connect to lose the connection frequently or do not give appropriate bandwidth when I am connected. Here are some results of the usual go-to system checks: cat /etc/lsb-release; uname -a: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Linux mgeorge-lenovo 3.2.0-48-generic-pae #74-Ubuntu SMP Thu Jun 6 20:05:01 UTC 2013 i686 i686 i386 GNU/Linux lspci -nnk | grep -iA2 net: 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlwifi -- 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) Subsystem: Lenovo Device [17aa:3878] Kernel driver in use: tg3 lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 090c:7371 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) iwconfig: lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Dyno" Mode:Managed Frequency:2.412 GHz Access Point: CC:5D:4E:46:0A:93 Bit Rate=150 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-40 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:948 Invalid misc:728 Missed beacon:0 eth0 no wireless extensions. rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod: Module Size Used by uvcvideo 67203 0 videodev 86588 1 uvcvideo nouveau 712674 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197641 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau mxm_wmi 12893 1 nouveau wmi 18744 1 mxm_wmi joydev 17393 0 arc4 12473 2 snd_hda_codec_realtek 174313 1 snd_hda_codec_hdmi 31775 1 snd_hda_intel 32719 3 snd_hda_codec 109562 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80916 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi psmouse 86520 0 snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event serio_raw 13027 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq iwlwifi 366509 0 mac80211 436493 1 iwlwifi snd 62218 16 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,sn d_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 17890 0 sparse_keymap 13658 1 ideapad_laptop cfg80211 178877 2 iwlwifi,mac80211 ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm ir_mce_kbd_decoder 12681 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 ir_rc5_decoder 12459 0 rc_rc6_mce 12454 0 ir_nec_decoder 12459 0 video 19115 1 nouveau ene_ir 18019 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir bnep 17830 2 rfcomm 38139 0 parport_pc 32114 0 bluetooth 158479 10 bnep,rfcomm ppdev 12849 0 binfmt_misc 17292 1 mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141414 0 nm-tool: NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: tg3 State: unavailable Default: no HW Address: 00:23:5A:CC:85:BD Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 [Dyno] -------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: yes HW Address: 00:22:FA:D0:94:CA Capabilities: Speed: 150 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) *Dyno: Infra, CC:5D:4E:46:0A:93, Freq 2412 MHz, Rate 54 Mb/s, Strength 81 WPA2 IPv4 Settings: Address: 10.0.0.43 Prefix: 24 (255.255.255.0) Gateway: 10.0.0.1 DNS: 10.0.0.1

  Read the article

• Randomely loosing wireless connexion with Cubuntu 12.04

  - by statquant

  I am presently experiencing random disconnections from my wireless network. It looks like it is more and more frequent (however I have not seen any clear pattern). This is killing me... Here is some information that should help (from ubuntu forums). Thanks for reading Machine : Acer Aspire S3 statquant@euclide:~$ lsb_release -d Description: Ubuntu 12.04.1 LTS statquant@euclide:~$ uname -mr 3.2.0-33-generic x86_64 statquant@euclide:~$ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... statquant@euclide:~$ lspci 02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) statquant@euclide:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 004: ID 064e:c321 Suyin Corp. Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. statquant@euclide:~$ ifconfig wlan0 Link encap:Ethernet HWaddr 74:de:2b:dd:c4:78 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::76de:2bff:fedd:c478/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:913 errors:0 dropped:0 overruns:0 frame:0 TX packets:802 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:873218 (873.2 KB) TX bytes:125826 (125.8 KB) statquant@euclide:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"Bbox-D646D1" Mode:Managed Frequency:2.437 GHz Access Point: 00:19:70:80:01:6C Bit Rate=65 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=56/70 Signal level=-54 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:71 Missed beacon:0 statquant@euclide:~$ dmesg | grep "wlan" [ 17.495866] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.498950] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.072015] wlan0: authenticate with 00:19:70:80:01:6c (try 1) [ 20.269853] wlan0: authenticate with 00:19:70:80:01:6c (try 2) [ 20.272386] wlan0: authenticated [ 20.298682] wlan0: associate with 00:19:70:80:01:6c (try 1) [ 20.302321] wlan0: RX AssocResp from 00:19:70:80:01:6c (capab=0x431 status=0 aid=1) [ 20.302325] wlan0: associated [ 20.307307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.402292] wlan0: no IPv6 routers present statquant@euclide:~$ sudo lshw -C network [sudo] password for statquant: *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 74:de:2b:dd:c4:78 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-33-generic firmware=N/A ip=192.168.1.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c0400000-c047ffff memory:afb00000-afb0ffff statquant@euclide:~$ iwlist scan wlan0 Scan completed : Cell 01 - Address: 00:19:70:80:01:6C Channel:6 Frequency:2.437 GHz (Channel 6) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"Bbox-D646D1" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000125fb152bb Extra: Last beacon: 40020ms ago IE: Unknown: 000B42626F782D443634364431 IE: Unknown: 010882848B960C121824 IE: Unknown: 030106 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101820003A4000027A4000042435E0062322F00 IE: Unknown: 2D1A4C101BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D1606080800000000000000000000000000000000000000 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000 And... finally, please note that I did the following (after looking for fixes of similar problems), but unfortunately it did not work sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1

  Read the article

• Getting Audio from a Zone

  - by bleonard

  Now that I have Firefox and Java Web Start running from a zone, the last piece of the puzzle was audio (essential because most Flash content is accompanied by sound).  In the global zone there's a nice little utility called audiotest for testing your sound: bleonard@solaris:~$ audiotest Sound subsystem and version: SunOS Audio 4.0 (0x00040003) Platform: SunOS 5.11 snv_151a i86pc *** Scanning sound adapter #1 *** /dev/sound/audio810:0dsp (audio engine 0): audio810#0 - Performing audio playback test... <left> ................OK <right> ...............OK <stereo> ..............OK <measured sample rate 47727.00 Hz (-0.57%)> *** All tests completed OK *** Of course, before you can try audiotest in a zone, it must be installed: root@myzone:~# pkg install audio-utilities Packages to install: 1 Create boot environment: No DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 6/6 0.4/0.4 PHASE ACTIONS Install Phase 20/20 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 However, we'll need to do more than just install audiotest: root@myzone:~# audiotest /dev/mixer: No such file or directory The device file is missing from /dev. The audio devices also need to be added to the zone. For this we modify the zone configuration as follows: bleonard@solaris:~$ sudo zonecfg -z myzone Password: zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/audio* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/sound/* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/mixer* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/sndstat zonecfg:myzone:device> end zonecfg:myzone> verify zonecfg:myzone> exit Then reboot the zone: bleonard@solaris:~$ sudo zoneadm -z myzone reboot After which, audiotest should work: root@myzone:~# audiotest Sound subsystem and version: SunOS Audio 4.0 (0x00040003) Platform: SunOS 5.11 snv_151a i86pc *** Scanning sound adapter #1 *** /dev/sound/audio810:0dsp (audio engine 0): audio810#0 - Performing audio playback test... <left> ................OK <right> ...............OK <stereo> ..............OK <measured sample rate 48208.00 Hz (0.43%)> *** All tests completed OK *** You can also examine /dev/sndstat for additional information: root@myzone:~# cat /dev/sndstat SunOS Audio Framework Audio Devices: 0: audio810#0 Intel AC'97, ICH (DUPLEX) Mixers: 0: audio810#0 Intel AC'97, ICH AC'97 codec: SigmaTel STAC9700 However, when testing the sound from Firefox (from a user account other than root), such as this recent Flash presentation on Solaris availability, you may still be disappointed. This is simply a permissions problem, as the devices only have read and write permissions for root: root@myzone:~# ls -l /dev/audio* crw------- 1 root root 99, 3 Jul 1 10:21 /dev/audio crw------- 1 root root 99, 4 Jul 1 10:21 /dev/audioctl To address this: root@myzone:~# chmod 777 /dev/audio* root@myzone:~# chmod 777 /dev/sound/* And you should be all set.

  Read the article

• 12.10 unable to install or even run from Live CD with nVidia GTX 580

  - by user99056

  I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

  Read the article

• empty response body in ajax (or 206 Partial Content)

  - by Nikita Rybak

  Hi guys, I'm feeling completely stupid because I've spent two hours solving task which should be very simple and which I solved many times before. But now I'm not even sure in which direction to dig. I fail to fetch static content using ajax from local servers (Apache and Mongrel). I get responses 200 and 206 (depending on the server), empty response text (although Content-Length header is always correct), firebug shows request in red. Javascript is very generic, I'm getting same results even here: http://www.w3schools.com/ajax/tryit.asp?filename=tryajax_first (just change document location to 'http://localhost:3000/whatever') So, it's probably not the cause. Well, now I'm out of ideas. I can also post http headers, if it'll help. Thanks! Response Headers Connection close Date Sat, 01 May 2010 21:05:23 GMT Last-Modified Sun, 18 Apr 2010 19:33:26 GMT Content-Type text/html Content-Length 7466 Request Headers Host localhost:3000 User-Agent Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://www.w3schools.com/ajax/tryit_view.asp Origin http://www.w3schools.com Response Headers Date Sat, 01 May 2010 21:54:59 GMT Server Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 mod_jk/1.2.28 Etag "3d5cbdb-fb4-4819c460d4a40" Accept-Ranges bytes Content-Length 4020 Cache-Control max-age=7200, public, proxy-revalidate Expires Sat, 01 May 2010 23:54:59 GMT Content-Range bytes 0-4019/4020 Keep-Alive timeout=5, max=100 Connection Keep-Alive Content-Type application/javascript Request Headers Host localhost User-Agent Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Origin null

  Read the article

• PyDev and Django: PyDev breaking Django shell?

  - by Rosarch

  I've set up a new project, and populated it with simple models. (Essentially I'm following the tut.) When I run python manage.py shell on the command line, it works fine: >python manage.py shell Python 2.6.4 (r264:75708, Oct 26 2009, 08:23:19) [MSC v.1500 32 bit (Intel)] on win32 Type "help", "copyright", "credits" or "license" for more information. (InteractiveConsole) >>> from mysite.myapp.models import School >>> School.objects.all() [] Works great. Then, I try to do the same thing in Eclipse (using a Django project that is composed of the same files.) Right click on mysite project Django Shell with Django environment This is the output from the PyDev Console: >>> import sys; print('%s %s' % (sys.executable or sys.platform, sys.version)) C:\Python26\python.exe 2.6.4 (r264:75708, Oct 26 2009, 08:23:19) [MSC v.1500 32 bit (Intel)] >>> >>> from django.core import management;import mysite.settings as settings;management.setup_environ(settings) 'path\\to\\mysite' >>> from mysite.myapp.models import School >>> School.objects.all() Traceback (most recent call last): File "<console>", line 1, in <module> File "C:\Python26\lib\site-packages\django\db\models\query.py", line 68, in __repr__ data = list(self[:REPR_OUTPUT_SIZE + 1]) File "C:\Python26\lib\site-packages\django\db\models\query.py", line 83, in __len__ self._result_cache.extend(list(self._iter)) File "C:\Python26\lib\site-packages\django\db\models\query.py", line 238, in iterator for row in self.query.results_iter(): File "C:\Python26\lib\site-packages\django\db\models\sql\query.py", line 287, in results_iter for rows in self.execute_sql(MULTI): File "C:\Python26\lib\site-packages\django\db\models\sql\query.py", line 2368, in execute_sql cursor = self.connection.cursor() File "C:\Python26\lib\site-packages\django\db\backends\__init__.py", line 81, in cursor cursor = self._cursor() File "C:\Python26\lib\site-packages\django\db\backends\sqlite3\base.py", line 170, in _cursor self.connection = Database.connect(**kwargs) OperationalError: unable to open database file What am I doing wrong here?

  Read the article

• Explicit Type Conversion and Multiple Simple Type Specifiers

  - by James McNellis

  To value initialize an object of type T, one would do something along the lines of one of the following: T x = T(); T x((T())); My question concerns types specified by a combination of simple type specifiers, e.g., unsigned int: unsigned int x = unsigned int(); unsigned int x((unsigned int())); Visual C++ 2008 and Intel C++ Compiler 11.1 accept both of these without warnings; Comeau 4.3.10.1b2 and g++ 3.4.5 (which is, admittedly, not particularly recent) do not. According to the C++ standard (C++03 5.2.3/2, expr.type.conv): The expression T(), where T is a simple-type-specifier (7.1.5.2) for a non-array complete object type or the (possibly cv-qualified) void type, creates an rvalue of the specified type, which is value-initialized 7.1.5.2 says, "the simple type specifiers are," and follows with a list that includes unsigned and int. Therefore, given that in 5.2.3/2, "simple-type-specifier" is singular, and unsigned and int are two type specifiers, are the examples above that use unsigned int invalid? (and, if so, the followup is, is it incorrect for Microsoft and Intel to support said expressions?) This question is more out of curiosity than anything else; for all of the types specified by a combination of multiple simple type specifiers, value initialization is equivalent to zero initialization. (This question was prompted by comments in response to this answer to a question about initialization).

  Read the article

• How to setup matlabpool for multiple processors?

  - by JohnIdol

  I just setup a Extra Large Heavy Computation EC2 instance to throw it at my Genetic Algorithms problem, hoping to speed up things. This instance has 8 Intel Xeon processors (around 2.4Ghz each) and 7 Gigs of RAM. On my machine I have an Intel Core Duo, and matlab is able to work with my two cores just fine by runinng: matlabpool open 2 On the EC2 instance though, matlab only is capable of detecting 1 out of 8 processors, and if I try running: matlabpool open 8 I get an error saying that the ClusterSize is 1 since there's only 1 core on my CPU. True, there is only 1 core on each CPU, but I have 8 CPUs on the given EC2 instance! So the difference from my machine and the ec2 instance is that I have my 2 cores on a single processor locally, while the EC2 instance has 8 distinct processors. My question is, how do I get matlab to work with those 8 processors? I found this paper, but it seems related to setting up matlab with multiple EC2 instances (not related to multiple processors on the same instance, EC2 or not), which is not my problem. Any help appreciated!

  Read the article

• How do I test OpenCL on GPU when logged in remotely on Mac?

  - by Christopher Bruns

  My OpenCL program can find the GPU device when I am logged in at the console, but not when I am logged in remotely with ssh. Further, if I run the program as root in the ssh session, the program can find the GPU. The computer is a Snow Leopard Mac with a GeForce 9400 GPU. If I run the program (see below) from the console or as root, the output is as follows (notice the "GeForce 9400" line): 2 devices found Device #0 name = GeForce 9400 Device #1 name = Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz but if it is just me, over ssh, there is no GeForce 9400 entry: 1 devices found Device #0 name = Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz I would like to test my code on the GPU without having to be root. Is that possible? Simplified GPU finding program below: #include <stdio.h> #include <OpenCL/opencl.h> int main(int argc, char** argv) { char dname[500]; size_t namesize; cl_device_id devices[10]; cl_uint num_devices; int d; clGetDeviceIDs(0, CL_DEVICE_TYPE_ALL, 10, devices, &num_devices); printf("%d devices found\n", num_devices); for (d = 0; d < num_devices; ++d) { clGetDeviceInfo(devices[d], CL_DEVICE_NAME, 500, dname, &namesize); printf("Device #%d name = %s\n", d, dname); } return 0; } EDIT: I found essentially the same question being asked on nvidia's forums. Unfortunately, the only answer was of the form "this is the wrong forum".

  Read the article

• SQLite self-join performance

  - by Derk

  What I essentially want, is to retreive all features and values of products which have a particular feature and value. For example: I want to know all available hard drive sizes of products that have an Intel processor. I have three tables: product_to_value (product_id, feature_id, value_id) features (id, value) // for example Processor family, Storage size, etc. values (id, value) // for example Intel, 60GB, etc The simplified query I have now: SELECT features.name, featurevalues.name, featurevalues.value FROM products, products as prod2, features, features as feat2, values, values as val2 WHERE products.feature = features.id AND products.value = values.id AND products.product = prod2.product AND prod2.feature_id = feat2.id AND prod2.value_id = val2.id AND features.id = ? AND feat2.id = ? All columns have an index. I am using SQLite. The problem is that it's very slow (70ms per query, without the self-join it's <1ms). Is there a smarter way to fetch data like this? Or is this too much to ask from SQLite? I personally think I am simply overlooking something, as I am quite new to SQLite.

  Read the article

• Problems using a library in Xcode

  - by Pablo

  Hi! I'm actually developping an application for iPhone and I need to use a library, initially dedicated to a Linux environment. Since I'm using a Mac (with Snow Leopard and Intel Core Duo), I guess it's possible to use this library in my app. My library has 3 files: a file .h, a file .a and a file .so (both .a and .so are in /Developer/usr/lib). In addition I have included the .h i nmy code and I've added the .a in XCode has a framework (and it works because XCode find the .so compiling). For your info when I use the command "file" for the file .so, I have: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, not stripped When I compile for the Xcode Simulator, I have a warning and an error. The warning is: In /Developer/usr/lib/mylib.so, file was built for unsupported file format which is not the architecture being linked (i386) The error is: "_mylib_fct", referenced from: -[MyAppAppDelegate applicationDidBecomeActive:] in MyAppAppDelegate.o Symbol(s) not found Collect2: ld returned 1 exit status When I compile for the Device 3.0 with architecture arm6, I also have the same error, but the warning is quite different: ln /Users/Pablo/MyApp/mylib.a file is not of required architecture I try to solve this and make the app working with this lib since days, and I don't understand why the compiler is complaining... is it a 32/64 bits issues ? How can I deal with that ? Your help will be very appreciated. Thx!

  Read the article

• Building a python module and linking it against a MacOSX framework

  - by madflo

  I'm trying to build a Python extension on MacOSX 10.6 and to link it against several frameworks (i386 only). I made a setup.py file, using distutils and the Extension object. I order to link against my frameworks, my LDFLAGS env var should look like : LDFLAGS = -lc -arch i386 -framework fwk1 -framework fwk2 As I did not find any 'framework' keyword in the Extension module documentation, I used the extra_link_args keyword instead. Extension('test', define_macros = [('MAJOR_VERSION', '1'), ,('MINOR_VERSION', '0')], include_dirs = ['/usr/local/include', 'include/', 'include/vitale'], extra_link_args = ['-arch i386', '-framework fwk1', '-framework fwk2'], sources = "testmodule.cpp", language = 'c++' ) Everything is compiling and linking fine. If I remove the -framework line from the extra_link_args, my linker fails, as expected. Here is the last two lines produced by a python setup.py build : /usr/bin/g++-4.2 -arch x86_64 -arch i386 -isysroot / -L/opt/local/lib -arch x86_64 -arch i386 -bundle -undefined dynamic_lookup build/temp.macosx-10.6-intel-2.6/testmodule.o -o build/lib.macosx-10.6-intel-2.6/test.so -arch i386 -framework sgdosx -framework srtosx -framework ssvosx -framework stsosx Unfortunately, the .so that I just produced is unable to find several symbols provided by this framework. I tried to check the linked framework with otool. None of them is appearing. $ otool -L test.so test.so: /usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.0.1) There is the output of otool run on a test binary, made with g++ and ldd using the LDFLAGS described at the top of my post. On this example, the -framework did work. $ otool -L vitaosx vitaosx: /Library/Frameworks/sgdosx.framework/Versions/A/sgdosx (compatibility version 1.0.0, current version 1.0.0) /Library/Frameworks/ssvosx.framework/Versions/A/ssvosx (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.0.1) May this issue be linked to the "-undefined dynamic_lookup" flag on the linking step ? I'm a little bit confused by the few lines of documentation that I'm finding on Google. Cheers,

  Read the article

• Is it possible that a single-threaded program is executed simultaneously on more than one CPU core?

  - by Wolfgang Plaschg

  When I run a single-threaded program that i have written on my quad core Intel i can see in the Windows Task Manager that actually all four cores of my CPU are more or less active. One core is more active than the other three, but there is also activity on those. There's no other program (besided the OS kernel of course) running that would be plausible for that activitiy. And when I close my program all activity an all cores drops down to nearly zero. All is left is a little "noise" on the cores, so I'm pretty sure all the visible activity comes directly or indirectly (like invoking system routines) from my program. Is it possible that the OS or the cores themselves try to balance some code or execution on all four cores, even it's not a multithreaded program? Do you have any links that documents this technique? Some infos to the program: It's a console app written in Qt, the Task Manager states that only one thread is running. Maybe Qt uses threads, but I don't use signals or slots, nor any GUI. Link to Task Manager screenshot: http://img97.imageshack.us/img97/6403/taskmanager.png This question is language agnostic and not tied to Qt/C++, i just want to know if Windows or Intel do to balance also single-threaded code on all cores. If they do, how does this technique work? All I can think of is, that kernel routines like reading from disk etc. is scheduled on all cores, but this won't improve performance significantly since the code still has to run synchronous to the kernel api calls. EDIT Do you know any tools to do a better analysis of single and/or multi-threaded programs than the poor Windows Task Manager?

  Read the article

• Performance of java on different hardware?

  - by tangens

  In another SO question I asked why my java programs run faster on AMD than on Intel machines. But it seems that I'm the only one who has observed this. Now I would like to invite you to share the numbers of your local java performance with the SO community. I observed a big performance difference when watching the startup of JBoss on different hardware, so I set this program as the base for this comparison. For participation please download JBoss 5.1.0.GA and run: jboss-5.1.0.GA/bin/run.sh (or run.bat) This starts a standard configuration of JBoss without any extra applications. Then look for the last line of the start procedure which looks like this: [ServerImpl] JBoss (Microcontainer) [5.1.0.GA (build: SVNTag=JBoss_5_1_0_GA date=200905221634)] Started in 25s:264ms Please repeat this procedure until the printed time is somewhat stable and post this line together with some comments on your hardware (I used cpu-z to get the infos) and operating system like this: java version: 1.6.0_13 OS: Windows XP Board: ASUS M4A78T-E Processor: AMD Phenom II X3 720, 2.8 GHz RAM: 2*2 GB DDR3 (labeled 1333 MHz) GPU: NVIDIA GeForce 9400 GT disc: Seagate 1.5 TB (ST31500341AS) Use your votes to bring the fastest configuration to the top. I'm very curious about the results. EDIT: Up to now only a few members have shared their results. I'd really be interested in the results obtained with some other architectures. If someone works with a MAC (desktop) or runs an Intel i7 with less than 3 GHz, please once start JBoss and share your results. It will only take a few minutes.

  Read the article

• What does "cpuid level" means ? Asking just for curiosity

  - by ogzylz

  For example, I put just 2 core info of a 16 core machine. What does "cpuid level : 6" line means? If u can provide info about lines "bogomips : 5992.10" and "clflush size : 64" I will be appreciated processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5992.10 clflush size : 64 cache_alignment : 128 address sizes : 40 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 1 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5985.23 clflush size : 64 cache_alignment : 128 address sizes : 40 bits physical, 48 bits virtual power management:

  Read the article

• Writing fortran robust and "modern" code

  - by Blklight

  In some scientific environments, you often cannot go without FORTRAN as most of the developers only know that idiom, and there is lot of legacy code and related experience. And frankly, there are not many other cross-platform options for high performance programming ( C++ would do the task, but the syntax, zero-starting arrays, and pointers are too much for most engineers ;-) ). I'm a C++ guy but I'm stuck with some F90 projects. So, let's assume a new project must use FORTRAN (F90), but I want to build the most modern software architecture out of it. while being compatible with most "recent" compilers (intel ifort, but also including sun/HP/IBM own compilers) So I'm thinking of imposing: global variable forbidden, no gotos, no jump labels, "implicit none", etc. "object-oriented programming" (modules with datatypes + related subroutines) modular/reusable functions, well documented, reusable libraries assertions/preconditions/invariants (implemented using preprocessor statements) unit tests for all (most) subroutines and "objects" an intense "debug mode" (#ifdef DEBUG) with more checks and all possible Intel compiler checks possible (array bounds, subroutine interfaces, etc.) uniform and enforced legible coding style, using code processing tools C stubs/wrappers for libpthread, libDL (and eventually GPU kernels, etc.) C/C++ implementation of utility functions (strings, file operations, sockets, memory alloc/dealloc reference counting for debug mode, etc.) ( This may all seem "evident" modern programming assumptions, but in a legacy fortran world, most of these are big changes in the typical programmer workflow ) The goal with all that is to have trustworthy, maintainable and modular code. Whereas, in typical fortran, modularity is often not a primary goal, and code is trustworthy only if the original developer was very clever, and the code was not changed since then ! (i'm a bit joking here, but not much) I searched around for references about object-oriented fortran, programming-by-contract (assertions/preconditions/etc.), and found only ugly and outdated documents, syntaxes and papers done by people with no large-scale project involvement, and dead projects. Any good URL, advice, reference paper/books on the subject?

  Read the article

• Execute less compiler anywhere on the computer

  - by Xenioz

  I'm having a little problem with executing *.cmd files so I can execute them anywhere on the computer with cmd. What I exactly want is to execute the less.cmd file, which support optional arguments and uses lessc.wsf (Less.js compiler for Windows Script Host) for converting less css to pure css. The less.cmd contains: ::For convenience @cscript //nologo "%~dp0lessc.wsf" %* What I've done so far: added absolute path to lessc.cmd to the PATH system variable and moved .cmd in the PATHTEXT system variable to the beginning. Also did this: From a command prompt; assoc .bat should return with ..bat=batfile If not assoc .bat=batfile to restore the default file type association. ftype batfile should return with batfile="%1" %* If not ftype batfile="%1" %* to restore the default "Open" action for the file type. This still doesn't work unless I approach the cmd file with a absolute path in cmd, if I enter lessc anywhere else then I get C:\Intel Intel is not recognized as an internal or external command, operable program or batch file. , I've restarted my computer more than once to be sure changes will take effect. I hope somebody has the answer.

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >