Search Results

Search found 8875 results on 355 pages for 'mime types'.

Page 76/355 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• Apache won't accept external requests

  - by Eric

  I am running Apache 2.2 on windows and I would like to access it remotely. Currently I can only access it from my local machine. I know the problem is not port forwarding because I tested it with other web servers (written in python). My httpd.conf file is below. I installed apache with the PHP installer. # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "C:/Program Files (x86)/Apache Software Foundation/Apache2.2" will be interpreted by the # server as "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/logs/foo.log". # # NOTE: Where filenames are specified, you must use forward slashes # instead of backslashes (e.g., "c:/apache" instead of "c:\apache"). # If a drive letter is omitted, the drive on which httpd.exe is located # will be used by default. It is recommended that you always supply # an explicit drive letter in absolute paths to avoid confusion. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "C:/Program Files (x86)/Apache Software Foundation/Apache2.2" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so #LoadModule auth_digest_module modules/mod_auth_digest.so #LoadModule authn_alias_module modules/mod_authn_alias.so #LoadModule authn_anon_module modules/mod_authn_anon.so #LoadModule authn_dbd_module modules/mod_authn_dbd.so #LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so #LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so #LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so #LoadModule cache_module modules/mod_cache.so #LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule cgi_module modules/mod_cgi.so #LoadModule charset_lite_module modules/mod_charset_lite.so #LoadModule dav_module modules/mod_dav.so #LoadModule dav_fs_module modules/mod_dav_fs.so #LoadModule dav_lock_module modules/mod_dav_lock.so #LoadModule dbd_module modules/mod_dbd.so #LoadModule deflate_module modules/mod_deflate.so LoadModule dir_module modules/mod_dir.so #LoadModule disk_cache_module modules/mod_disk_cache.so #LoadModule dumpio_module modules/mod_dumpio.so LoadModule env_module modules/mod_env.so #LoadModule expires_module modules/mod_expires.so #LoadModule ext_filter_module modules/mod_ext_filter.so #LoadModule file_cache_module modules/mod_file_cache.so #LoadModule filter_module modules/mod_filter.so #LoadModule headers_module modules/mod_headers.so #LoadModule ident_module modules/mod_ident.so #LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so #LoadModule ldap_module modules/mod_ldap.so #LoadModule logio_module modules/mod_logio.so LoadModule log_config_module modules/mod_log_config.so #LoadModule log_forensic_module modules/mod_log_forensic.so #LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule mime_module modules/mod_mime.so #LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule negotiation_module modules/mod_negotiation.so #LoadModule proxy_module modules/mod_proxy.so #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule proxy_http_module modules/mod_proxy_http.so #LoadModule reqtimeout_module modules/mod_reqtimeout.so #LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule speling_module modules/mod_speling.so #LoadModule ssl_module modules/mod_ssl.so LoadModule status_module modules/mod_status.so #LoadModule substitute_module modules/mod_substitute.so #LoadModule unique_id_module modules/mod_unique_id.so #LoadModule userdir_module modules/mod_userdir.so #LoadModule usertrack_module modules/mod_usertrack.so #LoadModule version_module modules/mod_version.so #LoadModule vhost_alias_module modules/mod_vhost_alias.so #LoadModule php5_module "c:/php/php5apache2_2.dll" <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName :80 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Allow from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride All # # Controls who can get stuff from this server. # Order deny,allow Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html index.php index.phtml index.htm default.html default.php default.phtml default.htm </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error.log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access.log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access.log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http:///bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml AddType application/x-httpd-php .php AddType application/x-httpd-php .phtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile conf/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http:///subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Virtual hosts #Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include conf/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> #PHPIniDir "c:/php" #BEGIN PHP INSTALLER EDITS - REMOVE ONLY ON UNINSTALL PHPIniDir "C:/PHP/" LoadModule php5_module "C:/PHP/php5apache2_2.dll" #END PHP INSTALLER EDITS - REMOVE ONLY ON UNINSTALL P.S sorry for the shortness of this post. I am in a rush

  Read the article

• An Introduction to jQuery Templates

  - by Stephen Walther

  The goal of this blog entry is to provide you with enough information to start working with jQuery Templates. jQuery Templates enable you to display and manipulate data in the browser. For example, you can use jQuery Templates to format and display a set of database records that you have retrieved with an Ajax call. jQuery Templates supports a number of powerful features such as template tags, template composition, and wrapped templates. I’ll concentrate on the features that I think that you will find most useful. In order to focus on the jQuery Templates feature itself, this blog entry is server technology agnostic. All the samples use HTML pages instead of ASP.NET pages. In a future blog entry, I’ll focus on using jQuery Templates with ASP.NET Web Forms and ASP.NET MVC (You can do some pretty powerful things when jQuery Templates are used on the client and ASP.NET is used on the server). Introduction to jQuery Templates The jQuery Templates plugin was developed by the Microsoft ASP.NET team in collaboration with the open-source jQuery team. While working at Microsoft, I wrote the original proposal for jQuery Templates, Dave Reed wrote the original code, and Boris Moore wrote the final code. The jQuery team – especially John Resig – was very involved in each step of the process. Both the jQuery community and ASP.NET communities were very active in providing feedback. jQuery Templates will be included in the jQuery core library (the jQuery.js library) when jQuery 1.5 is released. Until jQuery 1.5 is released, you can download the jQuery Templates plugin from the jQuery Source Code Repository or you can use jQuery Templates directly from the ASP.NET CDN. The documentation for jQuery Templates is already included with the official jQuery documentation at http://api.jQuery.com. The main entry for jQuery templates is located under the topic plugins/templates. A Basic Sample of jQuery Templates Let’s start with a really simple sample of using jQuery Templates. We’ll use the plugin to display a list of books stored in a JavaScript array. Here’s the complete code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html > <head> <title>Intro</title> <link href="0_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContent"> <h1>ASP.NET Bookstore</h1> <div id="bookContainer"></div> </div> <script id="bookTemplate" type="text/x-jQuery-tmpl"> <div> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Create an array of books var books = [ { title: "ASP.NET 4 Unleashed", price: 37.79, picture: "AspNet4Unleashed.jpg" }, { title: "ASP.NET MVC Unleashed", price: 44.99, picture: "AspNetMvcUnleashed.jpg" }, { title: "ASP.NET Kick Start", price: 4.00, picture: "AspNetKickStart.jpg" }, { title: "ASP.NET MVC Unleashed iPhone", price: 44.99, picture: "AspNetMvcUnleashedIPhone.jpg" }, ]; // Render the books using the template $("#bookTemplate").tmpl(books).appendTo("#bookContainer"); function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html> When you open this page in a browser, a list of books is displayed: There are several things going on in this page which require explanation. First, notice that the page uses both the jQuery 1.4.4 and jQuery Templates libraries. Both libraries are retrieved from the ASP.NET CDN: <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> You can use the ASP.NET CDN for free (even for production websites). You can learn more about the files included on the ASP.NET CDN by visiting the ASP.NET CDN documentation page. Second, you should notice that the actual template is included in a script tag with a special MIME type: <script id="bookTemplate" type="text/x-jQuery-tmpl"> <div> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> </script> This template is displayed for each of the books rendered by the template. The template displays a book picture, title, and price. Notice that the SCRIPT tag which wraps the template has a MIME type of text/x-jQuery-tmpl. Why is the template wrapped in a SCRIPT tag and why the strange MIME type? When a browser encounters a SCRIPT tag with an unknown MIME type, it ignores the content of the tag. This is the behavior that you want with a template. You don’t want a browser to attempt to parse the contents of a template because this might cause side effects. For example, the template above includes an <img> tag with a src attribute that points at “BookPictures/${picture}”. You don’t want the browser to attempt to load an image at the URL “BookPictures/${picture}”. Instead, you want to prevent the browser from processing the IMG tag until the ${picture} expression is replaced by with the actual name of an image by the jQuery Templates plugin. If you are not worried about browser side-effects then you can wrap a template inside any HTML tag that you please. For example, the following DIV tag would also work with the jQuery Templates plugin: <div id="bookTemplate" style="display:none"> <div> <h2>${title}</h2> price: ${formatPrice(price)} </div> </div> Notice that the DIV tag includes a style=”display:none” attribute to prevent the template from being displayed until the template is parsed by the jQuery Templates plugin. Third, notice that the expression ${…} is used to display the value of a JavaScript expression within a template. For example, the expression ${title} is used to display the value of the book title property. You can use any JavaScript function that you please within the ${…} expression. For example, in the template above, the book price is formatted with the help of the custom JavaScript formatPrice() function which is defined lower in the page. Fourth, and finally, the template is rendered with the help of the tmpl() method. The following statement selects the bookTemplate and renders an array of books using the bookTemplate. The results are appended to a DIV element named bookContainer by using the standard jQuery appendTo() method. $("#bookTemplate").tmpl(books).appendTo("#bookContainer"); Using Template Tags Within a template, you can use any of the following template tags. {{tmpl}} – Used for template composition. See the section below. {{wrap}} – Used for wrapped templates. See the section below. {{each}} – Used to iterate through a collection. {{if}} – Used to conditionally display template content. {{else}} – Used with {{if}} to conditionally display template content. {{html}} – Used to display the value of an HTML expression without encoding the value. Using ${…} or {{= }} performs HTML encoding automatically. {{= }}-- Used in exactly the same way as ${…}. {{! }} – Used for displaying comments. The contents of a {{!...}} tag are ignored. For example, imagine that you want to display a list of blog entries. Each blog entry could, possibly, have an associated list of categories. The following page illustrates how you can use the { if}} and {{each}} template tags to conditionally display categories for each blog entry:   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>each</title> <link href="1_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="blogPostContainer"></div> <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{each categories}} <i>${$value}</i> {{/each}} {{else}} Uncategorized {{/if}} </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> var blogPosts = [ { postTitle: "How to fix a sink plunger in 5 minutes", postEntry: "Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna.", categories: ["HowTo", "Sinks", "Plumbing"] }, { postTitle: "How to remove a broken lightbulb", postEntry: "Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna.", categories: ["HowTo", "Lightbulbs", "Electricity"] }, { postTitle: "New associate website", postEntry: "Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna." } ]; // Render the blog posts $("#blogPostTemplate").tmpl(blogPosts).appendTo("#blogPostContainer"); </script> </body> </html> When this page is opened in a web browser, the following list of blog posts and categories is displayed: Notice that the first and second blog entries have associated categories but the third blog entry does not. The third blog entry is “Uncategorized”. The template used to render the blog entries and categories looks like this: <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{each categories}} <i>${$value}</i> {{/each}} {{else}} Uncategorized {{/if}} </script> Notice the special expression $value used within the {{each}} template tag. You can use $value to display the value of the current template item. In this case, $value is used to display the value of each category in the collection of categories. Template Composition When building a fancy page, you might want to build a template out of multiple templates. In other words, you might want to take advantage of template composition. For example, imagine that you want to display a list of products. Some of the products are being sold at their normal price and some of the products are on sale. In that case, you might want to use two different templates for displaying a product: a productTemplate and a productOnSaleTemplate. The following page illustrates how you can use the {{tmpl}} tag to build a template from multiple templates:   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Composition</title> <link href="2_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContainer"> <h1>Products</h1> <div id="productListContainer"></div> <!-- Show list of products using composition --> <script id="productListTemplate" type="text/x-jQuery-tmpl"> <div> {{if onSale}} {{tmpl "#productOnSaleTemplate"}} {{else}} {{tmpl "#productTemplate"}} {{/if}} </div> </script> <!-- Show product --> <script id="productTemplate" type="text/x-jQuery-tmpl"> ${name} </script> <!-- Show product on sale --> <script id="productOnSaleTemplate" type="text/x-jQuery-tmpl"> <b>${name}</b> <img src="images/on_sale.png" alt="On Sale" /> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> var products = [ { name: "Laptop", onSale: false }, { name: "Apples", onSale: true }, { name: "Comb", onSale: false } ]; $("#productListTemplate").tmpl(products).appendTo("#productListContainer"); </script> </div> </body> </html>   In the page above, the main template used to display the list of products looks like this: <script id="productListTemplate" type="text/x-jQuery-tmpl"> <div> {{if onSale}} {{tmpl "#productOnSaleTemplate"}} {{else}} {{tmpl "#productTemplate"}} {{/if}} </div> </script>   If a product is on sale then the product is displayed with the productOnSaleTemplate (which includes an on sale image): <script id="productOnSaleTemplate" type="text/x-jQuery-tmpl"> <b>${name}</b> <img src="images/on_sale.png" alt="On Sale" /> </script>   Otherwise, the product is displayed with the normal productTemplate (which does not include the on sale image): <script id="productTemplate" type="text/x-jQuery-tmpl"> ${name} </script>   You can pass a parameter to the {{tmpl}} tag. The parameter becomes the data passed to the template rendered by the {{tmpl}} tag. For example, in the previous section, we used the {{each}} template tag to display a list of categories for each blog entry like this: <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{each categories}} <i>${$value}</i> {{/each}} {{else}} Uncategorized {{/if}} </script>   Another way to create this template is to use template composition like this: <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{tmpl(categories) "#categoryTemplate"}} {{else}} Uncategorized {{/if}} </script> <script id="categoryTemplate" type="text/x-jQuery-tmpl"> <i>${$data}</i> &nbsp; </script>   Using the {{each}} tag or {{tmpl}} tag is largely a matter of personal preference. Wrapped Templates The {{wrap}} template tag enables you to take a chunk of HTML and transform the HTML into another chunk of HTML (think easy XSLT). When you use the {{wrap}} tag, you work with two templates. The first template contains the HTML being transformed and the second template includes the filter expressions for transforming the HTML. For example, you can use the {{wrap}} template tag to transform a chunk of HTML into an interactive tab strip: When you click any of the tabs, you see the corresponding content. This tab strip was created with the following page: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Wrapped Templates</title> <style type="text/css"> body { font-family: Arial; background-color:black; } .tabs div { display:inline-block; border-bottom: 1px solid black; padding:4px; background-color:gray; cursor:pointer; } .tabs div.tabState_true { background-color:white; border-bottom:1px solid white; } .tabBody { border-top:1px solid white; padding:10px; background-color:white; min-height:400px; width:400px; } </style> </head> <body> <div id="tabsView"></div> <script id="tabsContent" type="text/x-jquery-tmpl"> {{wrap "#tabsWrap"}} <h3>Tab 1</h3> <div> Content of tab 1. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 2</h3> <div> Content of tab 2. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 3</h3> <div> Content of tab 3. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> {{/wrap}} </script> <script id="tabsWrap" type="text/x-jquery-tmpl"> <div class="tabs"> {{each $item.html("h3", true)}} <div class="tabState_${$index === selectedTabIndex}"> ${$value} </div> {{/each}} </div> <div class="tabBody"> {{html $item.html("div")[selectedTabIndex]}} </div> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Global for tracking selected tab var selectedTabIndex = 0; // Render the tab strip $("#tabsContent").tmpl().appendTo("#tabsView"); // When a tab is clicked, update the tab strip $("#tabsView") .delegate(".tabState_false", "click", function () { var templateItem = $.tmplItem(this); selectedTabIndex = $(this).index(); templateItem.update(); }); </script> </body> </html>   The “source” for the tab strip is contained in the following template: <script id="tabsContent" type="text/x-jquery-tmpl"> {{wrap "#tabsWrap"}} <h3>Tab 1</h3> <div> Content of tab 1. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 2</h3> <div> Content of tab 2. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 3</h3> <div> Content of tab 3. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> {{/wrap}} </script>   The tab strip is created with a list of H3 elements (which represent each tab) and DIV elements (which represent the body of each tab). Notice that the HTML content is wrapped in the {{wrap}} template tag. This template tag points at the following tabsWrap template: <script id="tabsWrap" type="text/x-jquery-tmpl"> <div class="tabs"> {{each $item.html("h3", true)}} <div class="tabState_${$index === selectedTabIndex}"> ${$value} </div> {{/each}} </div> <div class="tabBody"> {{html $item.html("div")[selectedTabIndex]}} </div> </script> The tabs DIV contains all of the tabs. The {{each}} template tag is used to loop through each of the H3 elements from the source template and render a DIV tag that represents a particular tab. The template item html() method is used to filter content from the “source” HTML template. The html() method accepts a jQuery selector for its first parameter. The tabs are retrieved from the source template by using an h3 filter. The second parameter passed to the html() method – the textOnly parameter -- causes the filter to return the inner text of each h3 element. You can learn more about the html() method at the jQuery website (see the section on $item.html()). The tabBody DIV renders the body of the selected tab. Notice that the {{html}} template tag is used to display the tab body so that HTML content in the body won’t be HTML encoded. The html() method is used, once again, to grab all of the DIV elements from the source HTML template. The selectedTabIndex global variable is used to display the contents of the selected tab. Remote Templates A common feature request for jQuery templates is support for remote templates. Developers want to be able to separate templates into different files. Adding support for remote templates requires only a few lines of extra code (Dave Ward has a nice blog entry on this). For example, the following page uses a remote template from a file named BookTemplate.htm: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Remote Templates</title> <link href="0_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContent"> <h1>ASP.NET Bookstore</h1> <div id="bookContainer"></div> </div> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Create an array of books var books = [ { title: "ASP.NET 4 Unleashed", price: 37.79, picture: "AspNet4Unleashed.jpg" }, { title: "ASP.NET MVC Unleashed", price: 44.99, picture: "AspNetMvcUnleashed.jpg" }, { title: "ASP.NET Kick Start", price: 4.00, picture: "AspNetKickStart.jpg" }, { title: "ASP.NET MVC Unleashed iPhone", price: 44.99, picture: "AspNetMvcUnleashedIPhone.jpg" }, ]; // Get the remote template $.get("BookTemplate.htm", null, function (bookTemplate) { // Render the books using the remote template $.tmpl(bookTemplate, books).appendTo("#bookContainer"); }); function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html>   The remote template is retrieved (and rendered) with the following code: // Get the remote template $.get("BookTemplate.htm", null, function (bookTemplate) { // Render the books using the remote template $.tmpl(bookTemplate, books).appendTo("#bookContainer"); });   This code uses the standard jQuery $.get() method to get the BookTemplate.htm file from the server with an Ajax request. After the BookTemplate.htm file is successfully retrieved, the $.tmpl() method is used to render an array of books with the template. Here’s what the BookTemplate.htm file looks like: <div> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> Notice that the template in the BooksTemplate.htm file is not wrapped by a SCRIPT element. There is no need to wrap the template in this case because there is no possibility that the template will get interpreted before you want it to be interpreted. If you plan to use the bookTemplate multiple times – for example, you are paging or sorting the books -- then you should compile the template into a function and cache the compiled template function. For example, the following page can be used to page through a list of 100 products (using iPhone style More paging). <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Template Caching</title> <link href="6_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <h1>Products</h1> <div id="productContainer"></div> <button id="more">More</button> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Globals var pageIndex = 0; // Create an array of products var products = []; for (var i = 0; i < 100; i++) { products.push({ name: "Product " + (i + 1) }); } // Get the remote template $.get("ProductTemplate.htm", null, function (productTemplate) { // Compile and cache the template $.template("productTemplate", productTemplate); // Render the products renderProducts(0); }); $("#more").click(function () { pageIndex++; renderProducts(); }); function renderProducts() { // Get page of products var pageOfProducts = products.slice(pageIndex * 5, pageIndex * 5 + 5); // Used cached productTemplate to render products $.tmpl("productTemplate", pageOfProducts).appendTo("#productContainer"); } function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html>   The ProductTemplate is retrieved from an external file named ProductTemplate.htm. This template is retrieved only once. Furthermore, it is compiled and cached with the help of the $.template() method: // Get the remote template $.get("ProductTemplate.htm", null, function (productTemplate) { // Compile and cache the template $.template("productTemplate", productTemplate); // Render the products renderProducts(0); });   The $.template() method compiles the HTML representation of the template into a JavaScript function and caches the template function with the name productTemplate. The cached template can be used by calling the $.tmp() method. The productTemplate is used in the renderProducts() method: function renderProducts() { // Get page of products var pageOfProducts = products.slice(pageIndex * 5, pageIndex * 5 + 5); // Used cached productTemplate to render products $.tmpl("productTemplate", pageOfProducts).appendTo("#productContainer"); } In the code above, the first parameter passed to the $.tmpl() method is the name of a cached template. Working with Template Items In this final section, I want to devote some space to discussing Template Items. A new Template Item is created for each rendered instance of a template. For example, if you are displaying a list of 100 products with a template, then 100 Template Items are created. A Template Item has the following properties and methods: data – The data associated with the Template Instance. For example, a product. tmpl – The template associated with the Template Instance. parent – The parent template item if the template is nested. nodes – The HTML content of the template. calls – Used by {{wrap}} template tag. nest – Used by {{tmpl}} template tag. wrap – Used to imperatively enable wrapped templates. html – Used to filter content from a wrapped template. See the above section on wrapped templates. update – Used to re-render a template item. The last method – the update() method -- is especially interesting because it enables you to re-render a template item with new data or even a new template. For example, the following page displays a list of books. When you hover your mouse over any of the books, additional book details are displayed. In the following screenshot, details for ASP.NET Kick Start are displayed. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Template Item</title> <link href="0_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContent"> <h1>ASP.NET Bookstore</h1> <div id="bookContainer"></div> </div> <script id="bookTemplate" type="text/x-jQuery-tmpl"> <div class="bookItem"> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> </script> <script id="bookDetailsTemplate" type="text/x-jQuery-tmpl"> <div class="bookItem"> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} <p> ${description} </p> </div> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Create an array of books var books = [ { title: "ASP.NET 4 Unleashed", price: 37.79, picture: "AspNet4Unleashed.jpg", description: "The most comprehensive book on Microsoft’s new ASP.NET 4.. " }, { title: "ASP.NET MVC Unleashed", price: 44.99, picture: "AspNetMvcUnleashed.jpg", description: "Writing for professional programmers, Walther explains the crucial concepts that make the Model-View-Controller (MVC) development paradigm work…" }, { title: "ASP.NET Kick Start", price: 4.00, picture: "AspNetKickStart.jpg", description: "Visual Studio .NET is the premier development environment for creating .NET applications…." }, { title: "ASP.NET MVC Unleashed iPhone", price: 44.99, picture: "AspNetMvcUnleashedIPhone.jpg", description: "ASP.NET MVC Unleashed for the iPhone…" }, ]; // Render the books using the template $("#bookTemplate").tmpl(books).appendTo("#bookContainer"); // Get compiled details template var bookDetailsTemplate = $("#bookDetailsTemplate").template(); // Add hover handler $(".bookItem").mouseenter(function () { // Get template item associated with DIV var templateItem = $(this).tmplItem(); // Change template to compiled template templateItem.tmpl = bookDetailsTemplate; // Re-render template templateItem.update(); }); function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html>   There are two templates used to display a book: bookTemplate and bookDetailsTemplate. When you hover your mouse over a template item, the standard bookTemplate is swapped out for the bookDetailsTemplate. The bookDetailsTemplate displays a book description. The books are rendered with the bookTemplate with the following line of code: // Render the books using the template $("#bookTemplate").tmpl(books).appendTo("#bookContainer");   The following code is used to swap the bookTemplate and the bookDetailsTemplate to show details for a book: // Get compiled details template var bookDetailsTemplate = $("#bookDetailsTemplate").template(); // Add hover handler $(".bookItem").mouseenter(function () { // Get template item associated with DIV var templateItem = $(this).tmplItem(); // Change template to compiled template templateItem.tmpl = bookDetailsTemplate; // Re-render template templateItem.update(); });   When you hover your mouse over a DIV element rendered by the bookTemplate, the mouseenter handler executes. First, this handler retrieves the Template Item associated with the DIV element by calling the tmplItem() method. The tmplItem() method returns a Template Item. Next, a new template is assigned to the Template Item. Notice that a compiled version of the bookDetailsTemplate is assigned to the Template Item’s tmpl property. The template is compiled earlier in the code by calling the template() method. Finally, the Template Item update() method is called to re-render the Template Item with the bookDetailsTemplate instead of the original bookTemplate. Summary This is a long blog entry and I still have not managed to cover all of the features of jQuery Templates J However, I’ve tried to cover the most important features of jQuery Templates such as template composition, template wrapping, and template items. To learn more about jQuery Templates, I recommend that you look at the documentation for jQuery Templates at the official jQuery website. Another great way to learn more about jQuery Templates is to look at the (unminified) source code.

  Read the article

• SQL SERVER – What is Spatial Database? – Developing with SQL Server Spatial and Deep Dive into Spati

  - by pinaldave

  What is Spatial Database? A spatial database is a database that is optimized to store and query data related to objects in space, including points, lines and polygons. While typical databases can understand various numeric and character types of data, additional functionality needs to be added for databases to process spatial data types. (Source: Wikipedia) Today I will be talking about the same subject at Microsoft TechEd India. If you want to learn about how to spatial aspect of data and how to integrate them with SQL Server this is the perfect session for you. Spatial is very special concept of SQL Server and I really like how it is implemented in SQL Server. In general Performance Tuning and Query Optimization is something I always have enjoyed in my professional life. Index are my best friends and many time, by implementing and many time by removing I have improved the performance of the system. In this session, I will be talking about Index along with Spatial Data. As Spatial Database is very interesting concept, I will cover super short but very interesting 10 quick slides about this subject. I will make sure in very first 20 mins, you will understand following topics Introduction to Spatial Database One line definition Understanding Spatial Indexing Index Internals Query/Performance Tuning Query Hinting/Cost Analysis Spatial Index Catalog Views Performance Troubleshooting Finding Optimal Index using Spatial Index SP Common Errors Index Maintenance This slides decks will be followed by around 30 mins demo which will have story of geometry, geography, index internals and performance tuning. If you are interested in learning how GIS works and how SQL Server out of the box supports this wonderful tools, you will really like how the story is told. I am sure all people who attend the event will know how the Bangalore is positioned on the map of India. I will take example of Bangalore and Hyderabad and demonstrate how index can improve the performance. Well there are lots of story to tell in the session, and I will be opening this session with the beautiful script of Botticelli’s Birth of Venus created by Michael J. Swart. I will also demonstrate few real life scenario where I will be talking about Spatial Database and its usage. Do not miss this session. At the end of session there will be book awarded to best participant. My session details: Session 3: Developing with SQL Server Spatial and Deep Dive into Spatial Indexing Date: April 14, 2010 Time: 5:00pm-6:00pm Microsoft SQL Server 2008 delivers new spatial data types that enable you to consume, use, and extend location-based data through spatial-enabled applications. Attend this session to learn how to use spatial functionality in next version of SQL Server to build and optimize spatial queries. This session outlines the new geography data type to store geodetic spatial data and perform operations on it, use the new geometry data type to store planar spatial data and perform operations on it, take advantage of new spatial indexes for high performance queries, use the new spatial results tab to quickly and easily view spatial query results directly from within Management Studio, extend spatial data capabilities by building or integrating location-enabled applications through support for spatial standards and specifications and much more. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Index, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology Tagged: Spatial Database

  Read the article

• BizTalk Cross Reference Data Management Strategy

  - by charlie.mott

  Article Source: http://geekswithblogs.net/charliemott This article describes an approach to the management of cross reference data for BizTalk.  Some articles about the BizTalk Cross Referencing features can be found here: http://home.comcast.net/~sdwoodgate/xrefseed.zip http://geekswithblogs.net/michaelstephenson/archive/2006/12/24/101995.aspx http://geekswithblogs.net/charliemott/archive/2009/04/20/value-vs.id-cross-referencing-in-biztalk.aspx Options Current options to managing this data include: Maintaining xml files in the format that can be used by the out-of-the-box BTSXRefImport.exe utility. Use of user interfaces that have been developed to manage this data: BizTalk Cross Referencing Tool XRef XML Creation Tool However, there are the following issues with the above options: The 'BizTalk Cross Referencing Tool' requires a separate database to manage.  The 'XRef XML Creation' tool has no means of persisting the data settings. The 'BizTalk Cross Referencing tool' generates integers in the common id field. I prefer to use a string (e.g. acme.country.uk). This is more readable. (see naming conventions below). Both UI tools continue to use BTSXRefImport.exe.  This utility replaces all xref data. This can be a problem in continuous integration environments that support multiple clients or BizTalk target instances.  If you upload the data for one client it would destroy the data for another client.  Yet in TFS where builds run concurrently, this would break unit tests. Alternative Approach In response to these issues, I instead use simple SQL scripts to directly populate the BizTalkMgmtDb xref tables combined with a data namepacing strategy to isolate client data. Naming Conventions All data keys use namespace prefixing.  The pattern will be <companyName>.<data Type>.  The naming conventions will be to use lower casing for all items.  The data must follow this pattern to isolate it from other company cross-reference data.  The table below shows some sample data. (Note: this data uses the 'ID' cross-reference tables.  the same principles apply for the 'value' cross-referencing tables). Table.Field Description Sample Data xref_AppType.appType Application Types acme.erp acme.portal acme.assetmanagement xref_AppInstance.appInstance Application Instances (each will have a corresponding application type). acme.dynamics.ax acme.dynamics.crm acme.sharepoint acme.maximo xref_IDXRef.idXRef Holds the cross reference data types. acme.taxcode acme.country xref_IDXRefData.CommonID Holds each cross reference type value used by the canonical schemas. acme.vatcode.exmpt acme.vatcode.std acme.country.usa acme.country.uk xref_IDXRefData.AppID This holds the value for each application instance and each xref type. GBP USD SQL Scripts The data to be stored in the BizTalkMgmtDb xref tables will be managed by SQL scripts stored in a database project in the visual studio solution. File(s) Description Build.cmd A sqlcmd script to deploy data by running the SQL scripts below.  (This can be run as part of the MSBuild process).   acme.purgexref.sql SQL script to clear acme.* data from the xref tables.  As such, this will not impact data for any other company. acme.applicationInstances.sql   SQL script to insert application type and application instance data.   acme.vatcode.sql acme.country.sql etc ...  There will be a separate SQL script to insert each cross-reference data type and application specific values for these types.

  Read the article

• Displaying JSON in your Browser

  - by Rick Strahl

  Do you work with AJAX requests a lot and need to quickly check URLs for JSON results? Then you probably know that it’s a fairly big hassle to examine JSON results directly in the browser. Yes, you can use FireBug or Fiddler which work pretty well for actual AJAX requests, but if you just fire off a URL for quick testing in the browser you usually get hit by the Save As dialog and the download manager, followed by having to open the saved document in a text editor in FireFox. Enter JSONView which allows you to simply display JSON results directly in the browser. For example, imagine I have a URL like this: http://localhost/westwindwebtoolkitweb/RestService.ashx?Method=ReturnObject&format=json&Name1=Rick&Name2=John&date=12/30/2010 typed directly into the browser and that that returns a complex JSON object. With JSONView the result looks like this: No fuss, no muss. It just works. Here the result is an array of Person objects that contain additional address child objects displayed right in the browser. JSONView basically adds content type checking for application/json results and when it finds a JSON result takes over the rendering and formats the display in the browser. Note that it re-formats the raw JSON as well for a nicer display view along with collapsible regions for objects. You can still use View Source to see the raw JSON string returned. For me this is a huge time-saver. As I work with AJAX result data using GET and REST style URLs quite a bit it’s a big timesaver. To quickly and easily display JSON is a key feature in my development day and JSONView for all its simplicity fits that bill for me. If you’re doing AJAX development and you often review URL based JSON results do yourself a favor and pick up a copy of JSONView. Other Browsers JSONView works only with FireFox – what about other browsers? Chrome Chrome actually displays raw JSON responses as plain text without any plug-ins. There’s no plug-in or configuration needed, it just works, although you won’t get any fancy formatting. [updated from comments] There’s also a port of JSONView available for Chrome from here: https://chrome.google.com/webstore/detail/chklaanhfefbnpoihckbnefhakgolnmc It looks like it works just about the same as the JSONView plug-in for FireFox. Thanks for all that pointed this out… Internet Explorer Internet Explorer probably has the worst response to JSON encoded content: It displays an error page as it apparently tries to render JSON as XML: Yeah that seems real smart – rendering JSON as an XML document. WTF? To get at the actual JSON output, you can use View Source. To get IE to display JSON directly as text you can add a Mime type mapping in the registry:   Create a new application/json key in: HKEY_CLASSES_ROOT\MIME\Database\ContentType\application/json Add a string value of CLSID with a value of {25336920-03F9-11cf-8FD0-00AA00686F13} Add a DWORD value of Encoding with a value of 80000 I can’t take credit for this tip – found it here first on Sky Sander’s Blog. Note that the CLSID can be used for just about any type of text data you want to display as plain text in the IE. It’s the in-place display mechanism and it should work for most text content. For example it might also be useful for looking at CSS and JS files inside of the browser instead of downloading those documents as well. © Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  AJAX  

  Read the article

• JustMock and Moles – A short overview for TDD alpha geeks

  - by RoyOsherove

  People have been lurking near my house, asking me to write something about Moles and JustMock, so I’ll try to be as objective as possible, taking in the fact that I work at Typemock. If I were NOT working at Typemock I’d write: JustMock JustMock tries to be Typemock at so many levels it’s not even funny. Technically they work the same and the API almost looks like it’s a search and replace work based on the Isolator API (awesome compliment!), but JustMock still has too many growing pains and bugs to be usable. Also, JustMock is missing alot of the legacy abilities such as Non public faking, faking all types and various other things that are really needed in real legacy code. Biggest thing (in terms of isolation integration) is that it does not integrate with other profilers such as coverage, NCover etc.) When JustMock comes out of beta, I feel that it should cost about half as Isolator costs, as it currently provides about half the abilities. Moles Moles is an addon of Pex and was originally only intended to work within the Pex environment. It started as a research project and now it’s a power-tool for VS (so it’s a separate install) Now it’s it’s own little stubbing framework. It’s not really an Isolation framework in the classic sense, because it does not provide any kind of API built in to verify object interactions. You have to use manual flags all on your own to do that. It generates two types of classes per assembly: Manual Stubs(just like you’d hand code them) and Mole classes. Each Mole class is a special API to change and break the behavior that the corresponding type. so MDateTime is how you change behavior for DateTime. In that sense the API is al over the place, and it can become highly unreadable and unmentionable over time in your test. Also, the Moles API isn’t really designed to deal with real Legacy code. It only deals with public types and methods. anything internal or private is ignored and you can’t change its behavior. You also can’t control static constructors. That takes about 95% of legacy scenarios out of the picture if that’s what you’re trying to use it for. Personally, I found it hard to get used to the idea of two parallel APIs for different abilities, and when to choose which. and I know this stuff. I would expect more usability from the API to make it more widely used. I don’t think that Moles in planning to go that route. Publishing it as an Isolation framework is really an afterthought of a tool that was design with a specific task in mind, and generic Isolation isn’t it. it’s only hope is DEQ – a simple code example that shows a simple Isolation API built on the Moles generic engine. Moles can and should be used for very simple cases of detouring functionality such a simple static methods or interfaces and virtual functions (like rhinomock and MOQ do).   Oh, Wait. Ah, good thing I work at Typemock. I won’t write all that. I’ll just write: JustMock and Moles are great tools that enlarge the market space for isolation related technologies, and they prove that the idea of productivity and unit testing can go hand in hand and get people hooked. I look forward to compete with them at this growing market.

  Read the article

• C# 4.0: COM Interop Improvements

  - by Paulo Morgado

  Dynamic resolution as well as named and optional arguments greatly improve the experience of interoperating with COM APIs such as Office Automation Primary Interop Assemblies (PIAs). But, in order to alleviate even more COM Interop development, a few COM-specific features were also added to C# 4.0. Ommiting ref Because of a different programming model, many COM APIs contain a lot of reference parameters. These parameters are typically not meant to mutate a passed-in argument, but are simply another way of passing value parameters. Specifically for COM methods, the compiler allows to declare the method call passing the arguments by value and will automatically generate the necessary temporary variables to hold the values in order to pass them by reference and will discard their values after the call returns. From the point of view of the programmer, the arguments are being passed by value. This method call: object fileName = "Test.docx"; object missing = Missing.Value; document.SaveAs(ref fileName, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing); can now be written like this: document.SaveAs("Test.docx", Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value); And because all parameters that are receiving the Missing.Value value have that value as its default value, the declaration of the method call can even be reduced to this: document.SaveAs("Test.docx"); Dynamic Import Many COM methods accept and return variant types, which are represented in the PIAs as object. In the vast majority of cases, a programmer calling these methods already knows the static type of a returned object form the context of the call, but has to explicitly perform a cast on the returned values to make use of that knowledge. These casts are so common that they constitute a major nuisance. To make the developer’s life easier, it is now possible to import the COM APIs in such a way that variants are instead represented using the type dynamic which means that COM signatures have now occurrences of dynamic instead of object. This means that members of a returned object can now be easily accessed or assigned into a strongly typed variable without having to cast. Instead of this code: ((Excel.Range)(excel.Cells[1, 1])).Value2 = "Hello World!"; this code can now be used: excel.Cells[1, 1] = "Hello World!"; And instead of this: Excel.Range range = (Excel.Range)(excel.Cells[1, 1]); this can be used: Excel.Range range = excel.Cells[1, 1]; Indexed And Default Properties A few COM interface features are still not available in C#. On the top of the list are indexed properties and default properties. As mentioned above, these will be possible if the COM interface is accessed dynamically, but will not be recognized by statically typed C# code. No PIAs – Type Equivalence And Type Embedding For assemblies indentified with PrimaryInteropAssemblyAttribute, the compiler will create equivalent types (interfaces, structs, enumerations and delegates) and embed them in the generated assembly. To reduce the final size of the generated assembly, only the used types and their used members will be generated and embedded. Although this makes development and deployment of applications using the COM components easier because there’s no need to deploy the PIAs, COM component developers are still required to build the PIAs.

  Read the article

• From NaN to Infinity...and Beyond!

  - by Tony Davis

  It is hard to believe that it was once possible to corrupt a SQL Server Database by storing perfectly normal data values into a table; but it is true. In SQL Server 2000 and before, one could inadvertently load invalid data values into certain data types via RPC calls or bulk insert methods rather than DML. In the particular case of the FLOAT data type, this meant that common 'special values' for this type, namely NaN (not-a-number) and +/- infinity, could be quite happily plugged into the database from an application and stored as 'out-of-range' values. This was like a time-bomb. When one then tried to query this data; the values were unsupported and so data pages containing them were flagged as being corrupt. Any query that needed to read a column containing the special value could fail or return unpredictable results. Microsoft even had to issue a hotfix to deal with failures in the automatic recovery process, caused by the presence of these NaN values, which rendered the whole database inaccessible! This problem is history for those of us on more current versions of SQL Server, but its ghost still haunts us. Recently, for example, a developer on Red Gate’s SQL Response team reported a strange problem when attempting to load historical monitoring data into a SQL Server 2005 database via the C# ADO.NET provider. The ratios used in some of their reporting calculations occasionally threw out NaN or infinity values, and the subsequent attempts to load these values resulted in a nasty error. It turns out to be a different manifestation of the same problem. SQL Server 2005 still does not fully support the IEEE 754 standard for floating point numbers, in that the FLOAT data type still cannot handle NaN or infinity values. Instead, they just added validation checks that prevent the 'invalid' values from being loaded in the first place. For people migrating from SQL Server 2000 databases that contained out-of-range FLOAT (or DATETIME etc.) data, to SQL Server 2005, Microsoft have added to the latter's version of the DBCC CHECKDB (or CHECKTABLE) command a DATA_PURITY clause. When enabled, this will seek out the corrupt data, but won’t fix it. You have to do this yourself in what can often be a slow, painful manual process. Our development team, after a quizzical shrug of the shoulders, simply decided to represent NaN and infinity values as NULL, and move on, accepting the minor inconvenience of not being able to tell them apart. However, what of scientific, engineering and other applications that really would like the luxury of being able to both store and access these perfectly-reasonable floating point data values? The sticking point seems to be the stipulation in the IEEE 754 standard that, when NaN is compared to any other value including itself, the answer is "unequal" (i.e. FALSE). This is clearly different from normal number comparisons and has repercussions for such things as indexing operations. Even so, this hardly applies to infinity values, which are single definite values. In fact, there is some encouraging talk in the Connect note on this issue that they might be supported 'in the SQL Server 2008 timeframe'. If didn't happen; SQL 2008 doesn't support NaN or infinity values, though one could be forgiven for thinking otherwise, based on the MSDN documentation for the FLOAT type, which states that "The behavior of float and real follows the IEEE 754 specification on approximate numeric data types". However, the truth is revealed in the XPath documentation, which states that "…float (53) is not exactly IEEE 754. For example, neither NaN (Not-a-Number) nor infinity is used…". Is it really so hard to fix this problem the right way, and properly support in SQL Server the IEEE 754 standard for the floating point data type, NaNs, infinities and all? Oracle seems to have managed it quite nicely with its BINARY_FLOAT and BINARY_DOUBLE types, so it is technically possible. We have an enterprise-class database that is marketed as being part of an 'integrated' Windows platform. Absurdly, we have .NET and XPath libraries that fully support the standard for floating point numbers, and we can't even properly store these values, let alone query them, in the SQL Server database! Cheers, Tony.

  Read the article

• How Can I Improve This Card-Game AI?

  - by James Burgess

  Let me get this out there before anything else: this is a learning exercise for me. I am not a game developer by trade or hobby (at least, not seriously) and am purely delving into some AI- and 3D-related topics to broaden my horizons a bit. As part of the learning experience, I thought I'd have a go at developing a basic card game AI. I selected Pit as the card game I was going to attempt to emulate (specifically, the 'bull and bear' variation of the game as mentioned in the link above). Unfortunately, the rule-set that I'm used to playing with (an older version of the game) isn't described. The basics of it are: The number of commodities played with is equal to the number of players. The bull and bear cards are included. All but two players receive 8 cards, two receive 9 cards. A player can win the round with 7 + bull, 8, or 8 + bull (receiving double points). The bear is a penalty card. You can trade up to a maximum of 4 cards at a time. They must all be of the same type, but can optionally include the bull or bear (so, you could trade A, A, A, Bull - but not A, B, A, Bull). For those who have played the card game, it will probably have been as obvious to you as it was to me that given the nature of the game, gameplay would seem to resemble a greedy algorithm. With this in mind, I thought it might simplify my AI experience somewhat. So, here's what I've come up with for a basic AI player to play Pit... and I'd really just like any form of suggestion (from improvements to reading materials) relating to it. Here it is in something vaguely pseudo-code-ish ;) While AI does not hold 7 similar + bull, 8 similar, or 8 similar + bull, do: 1. Establish 'target' hand, by seeing which card AI holds the most of. 2. Prepare to trade next-most-numerous card type in a trade (max. held, or 4, whichever is fewer) 3. If holding the bear, add to (if trading <=3 cards) or replace in (if trading 4 cards) hand. 4. Offer cards for trade. 5. If cards are accepted for trade within X turns, continue (clearing 'failed card types'). Otherwise: a. If only one card remains in the trade, go to #6. Otherwise: i. Remove one non-penalty card from the trade. ii. Return to #5. 6. Add card type to temporary list of failed card types. 7. Repeat from #2 (excluding 'failed card types'). I'm aware this is likely to be a sub-optimal way of solving the problem, but that's why I'm posting this question. Are there any AI- or algorithm-related concepts that I've missed and should be incorporating to make a better AI? Additionally, what are the flaws with my AI at present (I'm well aware it's probably far from complete)? Thanks in advance!

  Read the article

• Attachments in Oracle BPM 11g – Create a BPM Process Instance by passing an Attachment

  - by Venugopal Mangipudi

  Problem Statement: On a recent engagement I had  a requirement where we needed to create BPM instances using a message start event. The challenge was that the instance needed to be created after polling a file location and attaching the picked up file (pdf) as an attachment to the instance. Proposed Solution: I was contemplating using process API to accomplish this,but came up with a solution which involves a BPEL process to pickup the file and send a notification to the BPM process by passing the attachment as a payload. The following are some of the brief steps that were used to build the solution: BPM Process to receive an attachment as part of the payload: The BPM Process is a very simple process which has a Message Start event that accepts the attachment as an argument and a Simple User Task that the user can use to view the attachment (as part of the OOTB attachment panel). The Input payload is based on AttachmentPayload.xsd.  The 3 key elements of the the payload are: <xsd:element name="filename" type="xsd:string"/> <xsd:element name="mimetype" type="xsd:string"/> <xsd:element name="content" type="xsd:base64Binary"/> A screenshot of the Human task data assignment that need to performed to attach the file is provided here. Once the process and the UI project (default generated UI) are deployed to the SOA server, copy the wsdl location of the process service (from EM). This WSDL would be used in the BPEL project to create the Instances in the BPM process after a file is polled. BPEL Process to Poll for File and create instances in the BPM process: For the BPEL process a File adapter was configured as a Read service (File Streaming option and keeping the Schema as Opaque). Once a location and the file pattern to poll are provided the Readservice Partner Link was wired to Invoke the BPEL Process. Also, using the BPM Process WSDL, we can create the Webservice reference and can invoke the start operation. Before we do the assignment for the Invoke operation, a global variable should be created to hold the value of the fileName of the file. The mapping to the global variable can be done on the Receive activity properties (jca.file.FileName).  So for the assign operation before we invoke the BPM process service, we can get the content of the file from the receive input variable and the fileName from the jca.file.FileName property. The mimetype needs to be hard coded to the mime-type of the file: application/pdf (I am still researching ways to derive the mime type as it is not available as part of the jca.file properties).  The screenshot of the BPEL process can be found here and the Assign activity can be found here. The project source can be found at the following location. A sample pdf file to test the project and a screenshot of the BPM Human task screen after the successful creation of the instance can be found here. References: [1] https://blogs.oracle.com/fmwinaction/entry/oracle_bpm_adding_an_attachment

  Read the article

• Future Of F# At Jazoon 2011

  - by Alois Kraus

  I was at the Jazoon 2011 in Zurich (Switzerland). It was a really cool event and it had many top notch speaker not only from the Microsoft universe. One of the most interesting talks was from Don Syme with the title: F# Today/F# Tomorrow. He did show how to use F# scripting to browse through open databases/, OData Web Services, Sharepoint, …interactively. It looked really easy with the help of F# Type Providers which is the next big language feature in a future F# version. The object returned by a Type Provider is used to access the data like in usual strongly typed object model. No guessing how the property of an object is called. Intellisense will show it just as you expect. There exists a range of Type Providers for various data sources where the schema of the stored data can somehow be dynamically extracted. Lets use e.g. a free database it would be then let data = DbProvider(http://.....); data the object which contains all data from e.g. a chemical database. It has an elements collection which contains an element which has the properties: Name, AtomicMass, Picture, …. You can browse the object returned by the Type Provider with full Intellisense because the returned object is strongly typed which makes this happen. The same can be achieved of course with code generators that use an input the schema of the input data (OData Web Service, database, Sharepoint, JSON serialized data, …) and spit out the necessary strongly typed objects as an assembly. This does work but has the downside that if the schema of your data source is huge you will quickly run against a wall with traditional code generators since the generated “deserialization” assembly could easily become several hundred MB. *** The following part contains guessing how this exactly work by asking Don two questions **** Q: Can I use Type Providers within C#? D: No. Q: F# is after all a library. I can reference the F# assemblies and use the contained Type Providers? D: F# does annotate the generated types in a special way at runtime which is not a static type that C# could use. The F# type providers seem to use a hybrid approach. At compilation time the Type Provider is instantiated with the url of your input data. The obtained schema information is used by the compiler to generate static types as usual but only for a small subset (the top level classes up to certain nesting level would make sense to me). To make this work you need to access the actual data source at compile time which could be a problem if you want to keep the actual url in a config file. Ok so this explains why it does work at all. But in the demo we did see full intellisense support down to the deepest object level. It looks like if you navigate deeper into the object hierarchy the type provider is instantiated in the background and attach to a true static type the properties determined at run time while you were typing. So this type is not really static at all. It is static if you define as a static type that its properties shows up in intellisense. But since this type information is determined while you are typing and it is not used to generate a true static type and you cannot use these “intellistatic” types from C#. Nonetheless this is a very cool language feature. With the plotting libraries you can generate expressive charts from any datasource within seconds to get quickly an overview of any structured data storage. My favorite programming language C# will not get such features in the near future there is hope. If you restrict yourself to OData sources you can use LINQPad to query any OData enabled data source with LINQ with ease. There you can query Stackoverflow with The output is also nicely rendered which makes it a very good tool to explore OData sources today.

  Read the article

• Essbase BSO Data Fragmentation

  - by Ann Donahue

  Essbase BSO Data Fragmentation Data fragmentation naturally occurs in Essbase Block Storage (BSO) databases where there are a lot of end user data updates, incremental data loads, many lock and send, and/or many calculations executed.  If an Essbase database starts to experience performance slow-downs, this is an indication that there may be too much fragmentation.  See Chapter 54 Improving Essbase Performance in the Essbase DBA Guide for more details on measuring and eliminating fragmentation: http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/daprcset.html Fragmentation is likely to occur in the following situations: Read/write databases that users are constantly updating data Databases that execute calculations around the clock Databases that frequently update and recalculate dense members Data loads that are poorly designed Databases that contain a significant number of Dynamic Calc and Store members Databases that use an isolation level of uncommitted access with commit block set to zero There are two types of data block fragmentation Free space tracking, which is measured using the Average Fragmentation Quotient statistic. Block order on disk, which is measured using the Average Cluster Ratio statistic. Average Fragmentation Quotient The Average Fragmentation Quotient ratio measures free space in a given database.  As you update and calculate data, empty spaces occur when a block can no longer fit in its original space and will either append at the end of the file or fit in another empty space that is large enough.  These empty spaces take up space in the .PAG files.  The higher the number the more empty spaces you have, therefore, the bigger the .PAG file and the longer it takes to traverse through the .PAG file to get to a particular record.  An Average Fragmentation Quotient value of 3.174765 means the database is 3% fragmented with free space. Average Cluster Ratio Average Cluster Ratio describes the order the blocks actually exist in the database. An Average Cluster Ratio number of 1 means all the blocks are ordered in the correct sequence in the order of the Outline.  As you load data and calculate data blocks, the sequence can start to be out of order.  This is because when you write to a block it may not be able to place back in the exact same spot in the database that it existed before.  The lower this number the more out of order it becomes and the more it affects performance.  An Average Cluster Ratio value of 1 means no fragmentation.  Any value lower than 1 i.e. 0.01032828 means the data blocks are getting further out of order from the outline order. Eliminating Data Block Fragmentation Both types of data block fragmentation can be removed by doing a dense restructure or export/clear/import of the data.  There are two types of dense restructure: 1. Implicit Restructures Implicit dense restructure happens when outline changes are done using EAS Outline Editor or Dimension Build. Essbase restructures create new .PAG files restructuring the data blocks in the .PAG files. When Essbase restructures the data blocks, it regenerates the index automatically so that index entries point to the new data blocks. Empty blocks are NOT removed with implicit restructures. 2. Explicit Restructures Explicit dense restructure happens when a manual initiation of the database restructure is executed. An explicit dense restructure is a full restructure which comprises of a dense restructure as outlined above plus the removal of empty blocks Empty Blocks vs. Fragmentation The existence of empty blocks is not considered fragmentation.  Empty blocks can be created through calc scripts or formulas.  An empty block will add to an existing database block count and will be included in the block counts of the database properties.  There are no statistics for empty blocks.  The only way to determine if empty blocks exist in an Essbase database is to record your current block count, export the entire database, clear the database then import the exported data.  If the block count decreased, the difference is the number of empty blocks that had existed in the database.

  Read the article

• An Honest look at SharePoint Web Services

  - by juanlarios

  INTRODUCTION If you are a SharePoint developer you know that there are two basic ways to develop against SharePoint. 1) The object Model 2) Web services. SharePoint object model has the advantage of being quite rich. Anything you can do through the SharePoint UI as an administrator or end user, you can do through the object model. In fact everything that is done through the UI is done through the object model behind the scenes. The major disadvantage to getting at SharePoint this way is that the code needs to run on the server. This means that all web parts, event receivers, features, etc… all of this is code that is deployed to the server. The second way to get to SharePoint is through the built in web services. There are many articles on how to manipulate web services, how to authenticate to them and interact with them. The basic idea is that a remote application or process can contact SharePoint through a web service. Lots has been written about how great these web services are. This article is written to document the limitations, some of the issues and frustrations with working with SharePoint built in web services. Ultimately, for the tasks I was given to , SharePoint built in web services did not suffice. My evaluation of SharePoint built in services was compared against creating my own WCF Services to do what I needed. The current project I'm working on right now involved several "integration points". A remote application, installed on a separate server was to contact SharePoint and perform an task or operation. So I decided to start up Visual Studio and built a DLL and basically have 2 layers of logic. An integration layer and a data layer. A good friend of mine pointed me to SOLID principles and referred me to some videos and tutorials about it. I decided to implement the methodology (although a lot of the principles are common sense and I already incorporated in my coding practices). I was to deliver this dll to the application team and they would simply call the methods exposed by this dll and voila! it would do some task or operation in SharePoint. SOLUTION My integration layer implemented an interface that defined some of the basic integration tasks that I was to put together. My data layer was about the same, it implemented an interface with some of the tasks that I was going to develop. This gave me the opportunity to develop different data layers, ultimately different ways to get at SharePoint if I needed to. This is a classic SOLID principle. In this case it proved to be quite helpful because I wrote one data layer completely implementing SharePoint built in Web Services and another implementing my own WCF Service that I wrote. I should mention there is another layer underneath the data layer. In referencing SharePoint or WCF services in my visual studio project I created a class for every web service call. So for example, if I used List.asx. I created a class called "DocumentRetreival" this class would do the grunt work to connect to the correct URL, It would perform the basic operation of contacting the service and so on. If I used a view.asmx, I implemented a class called "ViewRetrieval" with the same idea as the last class but it would now interact with all he operations in view.asmx. This gave my data layer the ability to perform multiple calls without really worrying about some of the grunt work each class performs. This again, is a classic SOLID principle. So, in order to compare them side by side we can look at both data layers and with is involved in each. Lets take a look at the "Create Project" task or operation. The integration point is described as , "dll is to provide a way to create a project in SharePoint". Projects , in this case are basically document libraries. I am to implement a way in which a remote application can create a document library in SharePoint. Easy enough right? Use the list.asmx Web service in SharePoint. So here we go! Lets take a look at the code. I added the List.asmx web service reference to my project and this is the class that contacts it:  class DocumentRetrieval     {         private ListsSoapClient _service;      d   private bool _impersonation;         public DocumentRetrieval(bool impersonation, string endpt)         {             _service = new ListsSoapClient();             this.SetEndPoint(string.Format("{0}/{1}", endpt, ConfigurationManager.AppSettings["List"]));             _impersonation = impersonation;             if (_impersonation)             {                 _service.ClientCredentials.Windows.ClientCredential.Password = ConfigurationManager.AppSettings["password"];                 _service.ClientCredentials.Windows.ClientCredential.UserName = ConfigurationManager.AppSettings["username"];                 _service.ClientCredentials.Windows.AllowedImpersonationLevel =                     System.Security.Principal.TokenImpersonationLevel.Impersonation;             }     private void SetEndPoint(string p)          {             _service.Endpoint.Address = new EndpointAddress(p);          }          /// <summary>         /// Creates a document library with specific name and templateID         /// </summary>         /// <param name="listName">New list name</param>         /// <param name="templateID">Template ID</param>         /// <returns></returns>         public XmlElement CreateLibrary(string listName, int templateID, ref ExceptionContract exContract)         {             XmlDocument sample = new XmlDocument();             XmlElement viewCol = sample.CreateElement("Empty");             try             {                 _service.Open();                 viewCol = _service.AddList(listName, "", templateID);             }             catch (Exception ex)             {                 exContract = new ExceptionContract("DocumentRetrieval/CreateLibrary", ex.GetType(), "Connection Error", ex.StackTrace, ExceptionContract.ExceptionCode.error);                             }finally             {                 _service.Close();             }                                      return viewCol;         } } There was a lot more in this class (that I am not including) because i was reusing the grunt work and making other operations with LIst.asmx, For example, updating content types, changing or configuring lists or document libraries. One of the first things I noticed about working with the built in services is that you are really at the mercy of what is available to you. Before creating a document library (Project) I wanted to expose a IsProjectExisting method. This way the integration or data layer could recognize if a library already exists. Well there is no service call or method available to do that check. So this is what I wrote:   public bool DocLibExists(string listName, ref ExceptionContract exContract)         {             try             {                 var allLists = _service.GetListCollection();                                return allLists.ChildNodes.OfType<XmlElement>().ToList().Exists(x => x.Attributes["Title"].Value ==listName);             }             catch (Exception ex)             {                 exContract = new ExceptionContract("DocumentRetrieval/GetList/GetListWSCall", ex.GetType(), "Unable to Retrieve List Collection", ex.StackTrace, ExceptionContract.ExceptionCode.error);             }             return false;         } This really just gets an XMLElement with all the lists. It was then up to me to sift through the clutter and noise and see if Document library already existed. This took a little bit of getting used to. Now instead of working with code, you are working with XMLElement response format from web service. I wrote a LINQ query to go through and find if the attribute "Title" existed and had a value of the listname then it would return True, if not False. I didn't particularly like working this way. Dealing with XMLElement responses and then having to manipulate it to get at the exact data I was looking for. Once the check for the DocLibExists, was done, I would either create the document library or send back an error indicating the document library already existed. Now lets examine the code that actually creates the document library. It does what you are really after, it creates a document library. Notice how the template ID is really an integer. Every document library template in SharePoint has an ID associated with it. Document libraries, Image Library, Custom List, Project Tasks, etc… they all he a unique integer associated with it. Well, that's great but the client came back to me and gave me some specifics that each "project" or document library, should have. They specified they had 3 types of projects. Each project would have unique views, about 10 views for each project. Each Project specified unique configurations (auditing, versioning, content types, etc…) So what turned out to be a simple implementation of creating a document library as a repository for a project, turned out to be quite involved.  The first thing I thought of was to create a template for document library. There are other ways you can do this too. Using the web Service call, you could configure views, versioning, even content types, etc… the only catch is, you have to be working quite extensively with CAML. I am not fond of CAML. I can do it and work with it, I just don't like doing it. It is quite touchy and at times it is quite tough to understand where errors were made with CAML statements. Working with Web Services and CAML proved to be quite annoying. The service call would return a generic error message that did not particularly point me to a CAML statement syntax error, or even a CAML error. I was not sure if it was a security , performance or code based issue. It was quite tough to work with. At times it was difficult to work with because of the way SharePoint handles metadata. There are "Names", "Display Name", and "StaticName" fields. It was quite tough to understand at times, which one to use. So it took a lot of trial and error. There are tools that can help with CAML generation. There is also now intellisense for CAML statements in Visual Studio that might help but ultimately I'm not fond of CAML with Web Services.   So I decided on the template. So my plan was to create create a document library, configure it accordingly and then use The Template Builder that comes with the SharePoint SDK. This tool allows you to create site templates, list template etc… It is quite interesting because it does not generate an STP file, it actually generates an xml definition and a feature you can activate and make that template available on a site or site collection. The first issue I experienced with this is that one of the specifications to this template was that the "All Documents" view was to have 2 web parts on it. Well, it turns out that using the template builder , it did not include the web parts as part of the list template definition it generated. It backed up the settings, the views, the content types but not the custom web parts. I still decided to try this even without the web parts on the page. This new template defined a new Document library definition with a unique ID. The problem was that the service call accepts an int but it only has access to the built in library int definitions. Any new ones added or created will not be available to create. So this made it impossible for me to approach the problem this way.     I should also mention that one of the nice features about SharePoint is the ability to create list templates, back them up and then create lists based on that template. It can all be done by end user administrators. These templates are quite unique because they are saved as an STP file and not an xml definition. I also went this route and tried to see if there was another service call where I could create a document library based no given template name. Nope! none.      After some thinking I decide to implement a WCF service to do this creation for me. I was quite certain that the object model would allow me to create document libraries base on a template in which an ID was required and also templates saved as STP files. Now I don't want to bother with posting the code to contact WCF service because it's self explanatory, but I will post the code that I used to create a list with custom template. public ServiceResult CreateProject(string name, string templateName, string projectId)         {             string siteurl = SPContext.Current.Site.Url;             Guid webguid = SPContext.Current.Web.ID;                        using (SPSite site = new SPSite(siteurl))             {                 using (SPWeb rootweb = site.RootWeb)                 {                     SPListTemplateCollection temps = site.GetCustomListTemplates(rootweb);                     ProcessWeb(siteurl, webguid, web => Act_CreateProject(web, name, templateName, projectId, temps));                 }//SpWeb             }//SPSite              return _globalResult;                   }         private void Act_CreateProject(SPWeb targetsite, string name, string templateName, string projectId, SPListTemplateCollection temps) {                         var temp = temps.Cast<SPListTemplate>().FirstOrDefault(x => x.Name.Equals(templateName));             if (temp != null)             {                             try                 {                                         Guid listGuid = targetsite.Lists.Add(name, "", temp);                     SPList newList = targetsite.Lists[listGuid];                     _globalResult = new ServiceResult(true, "Success", "Success");                 }                 catch (Exception ex)                 {                     _globalResult = new ServiceResult(false, (string.IsNullOrEmpty(ex.Message) ? "None" : ex.Message + " " + templateName), ex.StackTrace.ToString());                 }                                       }        private void ProcessWeb(string siteurl, Guid webguid, Action<SPWeb> action) {                        using (SPSite sitecollection = new SPSite(siteurl)) {                 using (SPWeb web = sitecollection.AllWebs[webguid]) {                     action(web);                 }                     }                  } This code is actually some of the code I implemented for the service. there was a lot more I did on Project Creation which I will cover in my next blog post. I implemented an ACTION method to process the web. This allowed me to properly dispose the SPWEb and SPSite objects and not rewrite this code over and over again. So I implemented a WCF service to create projects for me, this allowed me to do a lot more than just create a document library with a template, it now gave me the flexibility to do just about anything the client wanted at project creation. Once this was implemented , the client came back to me and said, "we reference all our projects with ID's in our application. we want SharePoint to do the same". This has been something I have been doing for a little while now but I do hope that SharePoint 2010 can have more of an answer to this and address it properly. I have been adding metadata to SPWebs through property bag. I believe I have blogged about it before. This time it required metadata added to a document library. No problem!!! I also mentioned these web parts that were to go on the "All Documents" View. I took the opportunity to configure them to the appropriate settings. There were two settings that needed to be set on these web parts. One of them was a Project ID configured in the webpart properties. The following code enhances and replaces the "Act_CreateProject " method above:  private void Act_CreateProject(SPWeb targetsite, string name, string templateName, string projectId, SPListTemplateCollection temps) {                         var temp = temps.Cast<SPListTemplate>().FirstOrDefault(x => x.Name.Equals(templateName));             if (temp != null)             {                 SPLimitedWebPartManager wpmgr = null;                               try                 {                                         Guid listGuid = targetsite.Lists.Add(name, "", temp);                     SPList newList = targetsite.Lists[listGuid];                     SPFolder rootFolder = newList.RootFolder;                     rootFolder.Properties.Add(KEY, projectId);                     rootFolder.Update();                     if (rootFolder.ParentWeb != targetsite)                         rootFolder.ParentWeb.Dispose();                     if (!templateName.Contains("Natural"))                     {                         SPView alldocumentsview = newList.Views.Cast<SPView>().FirstOrDefault(x => x.Title.Equals(ALLDOCUMENTS));                         SPFile alldocfile = targetsite.GetFile(alldocumentsview.ServerRelativeUrl);                         wpmgr = alldocfile.GetLimitedWebPartManager(PersonalizationScope.Shared);                         ConfigureWebPart(wpmgr, projectId, CUSTOMWPNAME);                                              alldocfile.Update();                     }                                        if (newList.ParentWeb != targetsite)                         newList.ParentWeb.Dispose();                     _globalResult = new ServiceResult(true, "Success", "Success");                 }                 catch (Exception ex)                 {                     _globalResult = new ServiceResult(false, (string.IsNullOrEmpty(ex.Message) ? "None" : ex.Message + " " + templateName), ex.StackTrace.ToString());                 }                 finally                 {                     if (wpmgr != null)                     {                         wpmgr.Web.Dispose();                         wpmgr.Dispose();                     }                 }             }                         }       private void ConfigureWebPart(SPLimitedWebPartManager mgr, string prjId, string webpartname)         {             var wp = mgr.WebParts.Cast<System.Web.UI.WebControls.WebParts.WebPart>().FirstOrDefault(x => x.DisplayTitle.Equals(webpartname));             if (wp != null)             {                           (wp as ListRelationshipWebPart.ListRelationshipWebPart).ProjectID = prjId;                 mgr.SaveChanges(wp);             }         }   This Shows you how I was able to set metadata on the document library. It has to be added to the RootFolder of the document library, Unfortunately, the SPList does not have a Property bag that I can add a key\value pair to. It has to be done on the root folder. Now everything in the integration will reference projects by ID's and will not care about names. My, "DocLibExists" will now need to be changed because a web service is not set up to look at property bags.  I had to write another method on the Service to do the equivalent but with ID's instead of names.  The second thing you will notice about the code is the use of the Webpartmanager. I have seen several examples online, and also read a lot about memory leaks, The above code does not produce memory leaks. The web part manager creates an SPWeb, so just dispose it like I did. CONCLUSION This is a long long post so I will stop here for now, I will continue with more comparisons and limitations in my next post. My conclusion for this example is that Web Services will do the trick if you can suffer through CAML and if you are doing some simple operations. For Everything else, there's WCF! **** fireI apologize for the disorganization of this post, I was on a bus on a 12 hour trip to IOWA while I wrote it, I was half asleep and half awake, hopefully it makes enough sense to someone.

  Read the article

• Advanced TSQL Tuning: Why Internals Knowledge Matters

  - by Paul White

  There is much more to query tuning than reducing logical reads and adding covering nonclustered indexes.  Query tuning is not complete as soon as the query returns results quickly in the development or test environments.  In production, your query will compete for memory, CPU, locks, I/O and other resources on the server.  Today’s entry looks at some tuning considerations that are often overlooked, and shows how deep internals knowledge can help you write better TSQL. As always, we’ll need some example data.  In fact, we are going to use three tables today, each of which is structured like this: Each table has 50,000 rows made up of an INTEGER id column and a padding column containing 3,999 characters in every row.  The only difference between the three tables is in the type of the padding column: the first table uses CHAR(3999), the second uses VARCHAR(MAX), and the third uses the deprecated TEXT type.  A script to create a database with the three tables and load the sample data follows: USE master; GO IF DB_ID('SortTest') IS NOT NULL DROP DATABASE SortTest; GO CREATE DATABASE SortTest COLLATE LATIN1_GENERAL_BIN; GO ALTER DATABASE SortTest MODIFY FILE ( NAME = 'SortTest', SIZE = 3GB, MAXSIZE = 3GB ); GO ALTER DATABASE SortTest MODIFY FILE ( NAME = 'SortTest_log', SIZE = 256MB, MAXSIZE = 1GB, FILEGROWTH = 128MB ); GO ALTER DATABASE SortTest SET ALLOW_SNAPSHOT_ISOLATION OFF ; ALTER DATABASE SortTest SET AUTO_CLOSE OFF ; ALTER DATABASE SortTest SET AUTO_CREATE_STATISTICS ON ; ALTER DATABASE SortTest SET AUTO_SHRINK OFF ; ALTER DATABASE SortTest SET AUTO_UPDATE_STATISTICS ON ; ALTER DATABASE SortTest SET AUTO_UPDATE_STATISTICS_ASYNC ON ; ALTER DATABASE SortTest SET PARAMETERIZATION SIMPLE ; ALTER DATABASE SortTest SET READ_COMMITTED_SNAPSHOT OFF ; ALTER DATABASE SortTest SET MULTI_USER ; ALTER DATABASE SortTest SET RECOVERY SIMPLE ; USE SortTest; GO CREATE TABLE dbo.TestCHAR ( id INTEGER IDENTITY (1,1) NOT NULL, padding CHAR(3999) NOT NULL,   CONSTRAINT [PK dbo.TestCHAR (id)] PRIMARY KEY CLUSTERED (id), ) ; CREATE TABLE dbo.TestMAX ( id INTEGER IDENTITY (1,1) NOT NULL, padding VARCHAR(MAX) NOT NULL,   CONSTRAINT [PK dbo.TestMAX (id)] PRIMARY KEY CLUSTERED (id), ) ; CREATE TABLE dbo.TestTEXT ( id INTEGER IDENTITY (1,1) NOT NULL, padding TEXT NOT NULL,   CONSTRAINT [PK dbo.TestTEXT (id)] PRIMARY KEY CLUSTERED (id), ) ; -- ============= -- Load TestCHAR (about 3s) -- ============= INSERT INTO dbo.TestCHAR WITH (TABLOCKX) ( padding ) SELECT padding = REPLICATE(CHAR(65 + (Data.n % 26)), 3999) FROM ( SELECT TOP (50000) n = ROW_NUMBER() OVER (ORDER BY (SELECT 0)) - 1 FROM master.sys.columns C1, master.sys.columns C2, master.sys.columns C3 ORDER BY n ASC ) AS Data ORDER BY Data.n ASC ; -- ============ -- Load TestMAX (about 3s) -- ============ INSERT INTO dbo.TestMAX WITH (TABLOCKX) ( padding ) SELECT CONVERT(VARCHAR(MAX), padding) FROM dbo.TestCHAR ORDER BY id ; -- ============= -- Load TestTEXT (about 5s) -- ============= INSERT INTO dbo.TestTEXT WITH (TABLOCKX) ( padding ) SELECT CONVERT(TEXT, padding) FROM dbo.TestCHAR ORDER BY id ; -- ========== -- Space used -- ========== -- EXECUTE sys.sp_spaceused @objname = 'dbo.TestCHAR'; EXECUTE sys.sp_spaceused @objname = 'dbo.TestMAX'; EXECUTE sys.sp_spaceused @objname = 'dbo.TestTEXT'; ; CHECKPOINT ; That takes around 15 seconds to run, and shows the space allocated to each table in its output: To illustrate the points I want to make today, the example task we are going to set ourselves is to return a random set of 150 rows from each table.  The basic shape of the test query is the same for each of the three test tables: SELECT TOP (150) T.id, T.padding FROM dbo.Test AS T ORDER BY NEWID() OPTION (MAXDOP 1) ; Test 1 – CHAR(3999) Running the template query shown above using the TestCHAR table as the target, we find that the query takes around 5 seconds to return its results.  This seems slow, considering that the table only has 50,000 rows.  Working on the assumption that generating a GUID for each row is a CPU-intensive operation, we might try enabling parallelism to see if that speeds up the response time.  Running the query again (but without the MAXDOP 1 hint) on a machine with eight logical processors, the query now takes 10 seconds to execute – twice as long as when run serially. Rather than attempting further guesses at the cause of the slowness, let’s go back to serial execution and add some monitoring.  The script below monitors STATISTICS IO output and the amount of tempdb used by the test query.  We will also run a Profiler trace to capture any warnings generated during query execution. DECLARE @read BIGINT, @write BIGINT ; SELECT @read = SUM(num_of_bytes_read), @write = SUM(num_of_bytes_written) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; SET STATISTICS IO ON ; SELECT TOP (150) TC.id, TC.padding FROM dbo.TestCHAR AS TC ORDER BY NEWID() OPTION (MAXDOP 1) ; SET STATISTICS IO OFF ; SELECT tempdb_read_MB = (SUM(num_of_bytes_read) - @read) / 1024. / 1024., tempdb_write_MB = (SUM(num_of_bytes_written) - @write) / 1024. / 1024., internal_use_MB = ( SELECT internal_objects_alloc_page_count / 128.0 FROM sys.dm_db_task_space_usage WHERE session_id = @@SPID ) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; Let’s take a closer look at the statistics and query plan generated from this: Following the flow of the data from right to left, we see the expected 50,000 rows emerging from the Clustered Index Scan, with a total estimated size of around 191MB.  The Compute Scalar adds a column containing a random GUID (generated from the NEWID() function call) for each row.  With this extra column in place, the size of the data arriving at the Sort operator is estimated to be 192MB. Sort is a blocking operator – it has to examine all of the rows on its input before it can produce its first row of output (the last row received might sort first).  This characteristic means that Sort requires a memory grant – memory allocated for the query’s use by SQL Server just before execution starts.  In this case, the Sort is the only memory-consuming operator in the plan, so it has access to the full 243MB (248,696KB) of memory reserved by SQL Server for this query execution. Notice that the memory grant is significantly larger than the expected size of the data to be sorted.  SQL Server uses a number of techniques to speed up sorting, some of which sacrifice size for comparison speed.  Sorts typically require a very large number of comparisons, so this is usually a very effective optimization.  One of the drawbacks is that it is not possible to exactly predict the sort space needed, as it depends on the data itself.  SQL Server takes an educated guess based on data types, sizes, and the number of rows expected, but the algorithm is not perfect. In spite of the large memory grant, the Profiler trace shows a Sort Warning event (indicating that the sort ran out of memory), and the tempdb usage monitor shows that 195MB of tempdb space was used – all of that for system use.  The 195MB represents physical write activity on tempdb, because SQL Server strictly enforces memory grants – a query cannot ‘cheat’ and effectively gain extra memory by spilling to tempdb pages that reside in memory.  Anyway, the key point here is that it takes a while to write 195MB to disk, and this is the main reason that the query takes 5 seconds overall. If you are wondering why using parallelism made the problem worse, consider that eight threads of execution result in eight concurrent partial sorts, each receiving one eighth of the memory grant.  The eight sorts all spilled to tempdb, resulting in inefficiencies as the spilled sorts competed for disk resources.  More importantly, there are specific problems at the point where the eight partial results are combined, but I’ll cover that in a future post. CHAR(3999) Performance Summary: 5 seconds elapsed time 243MB memory grant 195MB tempdb usage 192MB estimated sort set 25,043 logical reads Sort Warning Test 2 – VARCHAR(MAX) We’ll now run exactly the same test (with the additional monitoring) on the table using a VARCHAR(MAX) padding column: DECLARE @read BIGINT, @write BIGINT ; SELECT @read = SUM(num_of_bytes_read), @write = SUM(num_of_bytes_written) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; SET STATISTICS IO ON ; SELECT TOP (150) TM.id, TM.padding FROM dbo.TestMAX AS TM ORDER BY NEWID() OPTION (MAXDOP 1) ; SET STATISTICS IO OFF ; SELECT tempdb_read_MB = (SUM(num_of_bytes_read) - @read) / 1024. / 1024., tempdb_write_MB = (SUM(num_of_bytes_written) - @write) / 1024. / 1024., internal_use_MB = ( SELECT internal_objects_alloc_page_count / 128.0 FROM sys.dm_db_task_space_usage WHERE session_id = @@SPID ) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; This time the query takes around 8 seconds to complete (3 seconds longer than Test 1).  Notice that the estimated row and data sizes are very slightly larger, and the overall memory grant has also increased very slightly to 245MB.  The most marked difference is in the amount of tempdb space used – this query wrote almost 391MB of sort run data to the physical tempdb file.  Don’t draw any general conclusions about VARCHAR(MAX) versus CHAR from this – I chose the length of the data specifically to expose this edge case.  In most cases, VARCHAR(MAX) performs very similarly to CHAR – I just wanted to make test 2 a bit more exciting. MAX Performance Summary: 8 seconds elapsed time 245MB memory grant 391MB tempdb usage 193MB estimated sort set 25,043 logical reads Sort warning Test 3 – TEXT The same test again, but using the deprecated TEXT data type for the padding column: DECLARE @read BIGINT, @write BIGINT ; SELECT @read = SUM(num_of_bytes_read), @write = SUM(num_of_bytes_written) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; SET STATISTICS IO ON ; SELECT TOP (150) TT.id, TT.padding FROM dbo.TestTEXT AS TT ORDER BY NEWID() OPTION (MAXDOP 1, RECOMPILE) ; SET STATISTICS IO OFF ; SELECT tempdb_read_MB = (SUM(num_of_bytes_read) - @read) / 1024. / 1024., tempdb_write_MB = (SUM(num_of_bytes_written) - @write) / 1024. / 1024., internal_use_MB = ( SELECT internal_objects_alloc_page_count / 128.0 FROM sys.dm_db_task_space_usage WHERE session_id = @@SPID ) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; This time the query runs in 500ms.  If you look at the metrics we have been checking so far, it’s not hard to understand why: TEXT Performance Summary: 0.5 seconds elapsed time 9MB memory grant 5MB tempdb usage 5MB estimated sort set 207 logical reads 596 LOB logical reads Sort warning SQL Server’s memory grant algorithm still underestimates the memory needed to perform the sorting operation, but the size of the data to sort is so much smaller (5MB versus 193MB previously) that the spilled sort doesn’t matter very much.  Why is the data size so much smaller?  The query still produces the correct results – including the large amount of data held in the padding column – so what magic is being performed here? TEXT versus MAX Storage The answer lies in how columns of the TEXT data type are stored.  By default, TEXT data is stored off-row in separate LOB pages – which explains why this is the first query we have seen that records LOB logical reads in its STATISTICS IO output.  You may recall from my last post that LOB data leaves an in-row pointer to the separate storage structure holding the LOB data. SQL Server can see that the full LOB value is not required by the query plan until results are returned, so instead of passing the full LOB value down the plan from the Clustered Index Scan, it passes the small in-row structure instead.  SQL Server estimates that each row coming from the scan will be 79 bytes long – 11 bytes for row overhead, 4 bytes for the integer id column, and 64 bytes for the LOB pointer (in fact the pointer is rather smaller – usually 16 bytes – but the details of that don’t really matter right now). OK, so this query is much more efficient because it is sorting a very much smaller data set – SQL Server delays retrieving the LOB data itself until after the Sort starts producing its 150 rows.  The question that normally arises at this point is: Why doesn’t SQL Server use the same trick when the padding column is defined as VARCHAR(MAX)? The answer is connected with the fact that if the actual size of the VARCHAR(MAX) data is 8000 bytes or less, it is usually stored in-row in exactly the same way as for a VARCHAR(8000) column – MAX data only moves off-row into LOB storage when it exceeds 8000 bytes.  The default behaviour of the TEXT type is to be stored off-row by default, unless the ‘text in row’ table option is set suitably and there is room on the page.  There is an analogous (but opposite) setting to control the storage of MAX data – the ‘large value types out of row’ table option.  By enabling this option for a table, MAX data will be stored off-row (in a LOB structure) instead of in-row.  SQL Server Books Online has good coverage of both options in the topic In Row Data. The MAXOOR Table The essential difference, then, is that MAX defaults to in-row storage, and TEXT defaults to off-row (LOB) storage.  You might be thinking that we could get the same benefits seen for the TEXT data type by storing the VARCHAR(MAX) values off row – so let’s look at that option now.  This script creates a fourth table, with the VARCHAR(MAX) data stored off-row in LOB pages: CREATE TABLE dbo.TestMAXOOR ( id INTEGER IDENTITY (1,1) NOT NULL, padding VARCHAR(MAX) NOT NULL,   CONSTRAINT [PK dbo.TestMAXOOR (id)] PRIMARY KEY CLUSTERED (id), ) ; EXECUTE sys.sp_tableoption @TableNamePattern = N'dbo.TestMAXOOR', @OptionName = 'large value types out of row', @OptionValue = 'true' ; SELECT large_value_types_out_of_row FROM sys.tables WHERE [schema_id] = SCHEMA_ID(N'dbo') AND name = N'TestMAXOOR' ; INSERT INTO dbo.TestMAXOOR WITH (TABLOCKX) ( padding ) SELECT SPACE(0) FROM dbo.TestCHAR ORDER BY id ; UPDATE TM WITH (TABLOCK) SET padding.WRITE (TC.padding, NULL, NULL) FROM dbo.TestMAXOOR AS TM JOIN dbo.TestCHAR AS TC ON TC.id = TM.id ; EXECUTE sys.sp_spaceused @objname = 'dbo.TestMAXOOR' ; CHECKPOINT ; Test 4 – MAXOOR We can now re-run our test on the MAXOOR (MAX out of row) table: DECLARE @read BIGINT, @write BIGINT ; SELECT @read = SUM(num_of_bytes_read), @write = SUM(num_of_bytes_written) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; SET STATISTICS IO ON ; SELECT TOP (150) MO.id, MO.padding FROM dbo.TestMAXOOR AS MO ORDER BY NEWID() OPTION (MAXDOP 1, RECOMPILE) ; SET STATISTICS IO OFF ; SELECT tempdb_read_MB = (SUM(num_of_bytes_read) - @read) / 1024. / 1024., tempdb_write_MB = (SUM(num_of_bytes_written) - @write) / 1024. / 1024., internal_use_MB = ( SELECT internal_objects_alloc_page_count / 128.0 FROM sys.dm_db_task_space_usage WHERE session_id = @@SPID ) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; TEXT Performance Summary: 0.3 seconds elapsed time 245MB memory grant 0MB tempdb usage 193MB estimated sort set 207 logical reads 446 LOB logical reads No sort warning The query runs very quickly – slightly faster than Test 3, and without spilling the sort to tempdb (there is no sort warning in the trace, and the monitoring query shows zero tempdb usage by this query).  SQL Server is passing the in-row pointer structure down the plan and only looking up the LOB value on the output side of the sort. The Hidden Problem There is still a huge problem with this query though – it requires a 245MB memory grant.  No wonder the sort doesn’t spill to tempdb now – 245MB is about 20 times more memory than this query actually requires to sort 50,000 records containing LOB data pointers.  Notice that the estimated row and data sizes in the plan are the same as in test 2 (where the MAX data was stored in-row). The optimizer assumes that MAX data is stored in-row, regardless of the sp_tableoption setting ‘large value types out of row’.  Why?  Because this option is dynamic – changing it does not immediately force all MAX data in the table in-row or off-row, only when data is added or actually changed.  SQL Server does not keep statistics to show how much MAX or TEXT data is currently in-row, and how much is stored in LOB pages.  This is an annoying limitation, and one which I hope will be addressed in a future version of the product. So why should we worry about this?  Excessive memory grants reduce concurrency and may result in queries waiting on the RESOURCE_SEMAPHORE wait type while they wait for memory they do not need.  245MB is an awful lot of memory, especially on 32-bit versions where memory grants cannot use AWE-mapped memory.  Even on a 64-bit server with plenty of memory, do you really want a single query to consume 0.25GB of memory unnecessarily?  That’s 32,000 8KB pages that might be put to much better use. The Solution The answer is not to use the TEXT data type for the padding column.  That solution happens to have better performance characteristics for this specific query, but it still results in a spilled sort, and it is hard to recommend the use of a data type which is scheduled for removal.  I hope it is clear to you that the fundamental problem here is that SQL Server sorts the whole set arriving at a Sort operator.  Clearly, it is not efficient to sort the whole table in memory just to return 150 rows in a random order. The TEXT example was more efficient because it dramatically reduced the size of the set that needed to be sorted.  We can do the same thing by selecting 150 unique keys from the table at random (sorting by NEWID() for example) and only then retrieving the large padding column values for just the 150 rows we need.  The following script implements that idea for all four tables: SET STATISTICS IO ON ; WITH TestTable AS ( SELECT * FROM dbo.TestCHAR ), TopKeys AS ( SELECT TOP (150) id FROM TestTable ORDER BY NEWID() ) SELECT T1.id, T1.padding FROM TestTable AS T1 WHERE T1.id = ANY (SELECT id FROM TopKeys) OPTION (MAXDOP 1) ; WITH TestTable AS ( SELECT * FROM dbo.TestMAX ), TopKeys AS ( SELECT TOP (150) id FROM TestTable ORDER BY NEWID() ) SELECT T1.id, T1.padding FROM TestTable AS T1 WHERE T1.id IN (SELECT id FROM TopKeys) OPTION (MAXDOP 1) ; WITH TestTable AS ( SELECT * FROM dbo.TestTEXT ), TopKeys AS ( SELECT TOP (150) id FROM TestTable ORDER BY NEWID() ) SELECT T1.id, T1.padding FROM TestTable AS T1 WHERE T1.id IN (SELECT id FROM TopKeys) OPTION (MAXDOP 1) ; WITH TestTable AS ( SELECT * FROM dbo.TestMAXOOR ), TopKeys AS ( SELECT TOP (150) id FROM TestTable ORDER BY NEWID() ) SELECT T1.id, T1.padding FROM TestTable AS T1 WHERE T1.id IN (SELECT id FROM TopKeys) OPTION (MAXDOP 1) ; SET STATISTICS IO OFF ; All four queries now return results in much less than a second, with memory grants between 6 and 12MB, and without spilling to tempdb.  The small remaining inefficiency is in reading the id column values from the clustered primary key index.  As a clustered index, it contains all the in-row data at its leaf.  The CHAR and VARCHAR(MAX) tables store the padding column in-row, so id values are separated by a 3999-character column, plus row overhead.  The TEXT and MAXOOR tables store the padding values off-row, so id values in the clustered index leaf are separated by the much-smaller off-row pointer structure.  This difference is reflected in the number of logical page reads performed by the four queries: Table 'TestCHAR' logical reads 25511 lob logical reads 000 Table 'TestMAX'. logical reads 25511 lob logical reads 000 Table 'TestTEXT' logical reads 00412 lob logical reads 597 Table 'TestMAXOOR' logical reads 00413 lob logical reads 446 We can increase the density of the id values by creating a separate nonclustered index on the id column only.  This is the same key as the clustered index, of course, but the nonclustered index will not include the rest of the in-row column data. CREATE UNIQUE NONCLUSTERED INDEX uq1 ON dbo.TestCHAR (id); CREATE UNIQUE NONCLUSTERED INDEX uq1 ON dbo.TestMAX (id); CREATE UNIQUE NONCLUSTERED INDEX uq1 ON dbo.TestTEXT (id); CREATE UNIQUE NONCLUSTERED INDEX uq1 ON dbo.TestMAXOOR (id); The four queries can now use the very dense nonclustered index to quickly scan the id values, sort them by NEWID(), select the 150 ids we want, and then look up the padding data.  The logical reads with the new indexes in place are: Table 'TestCHAR' logical reads 835 lob logical reads 0 Table 'TestMAX' logical reads 835 lob logical reads 0 Table 'TestTEXT' logical reads 686 lob logical reads 597 Table 'TestMAXOOR' logical reads 686 lob logical reads 448 With the new index, all four queries use the same query plan (click to enlarge): Performance Summary: 0.3 seconds elapsed time 6MB memory grant 0MB tempdb usage 1MB sort set 835 logical reads (CHAR, MAX) 686 logical reads (TEXT, MAXOOR) 597 LOB logical reads (TEXT) 448 LOB logical reads (MAXOOR) No sort warning I’ll leave it as an exercise for the reader to work out why trying to eliminate the Key Lookup by adding the padding column to the new nonclustered indexes would be a daft idea Conclusion This post is not about tuning queries that access columns containing big strings.  It isn’t about the internal differences between TEXT and MAX data types either.  It isn’t even about the cool use of UPDATE .WRITE used in the MAXOOR table load.  No, this post is about something else: Many developers might not have tuned our starting example query at all – 5 seconds isn’t that bad, and the original query plan looks reasonable at first glance.  Perhaps the NEWID() function would have been blamed for ‘just being slow’ – who knows.  5 seconds isn’t awful – unless your users expect sub-second responses – but using 250MB of memory and writing 200MB to tempdb certainly is!  If ten sessions ran that query at the same time in production that’s 2.5GB of memory usage and 2GB hitting tempdb.  Of course, not all queries can be rewritten to avoid large memory grants and sort spills using the key-lookup technique in this post, but that’s not the point either. The point of this post is that a basic understanding of execution plans is not enough.  Tuning for logical reads and adding covering indexes is not enough.  If you want to produce high-quality, scalable TSQL that won’t get you paged as soon as it hits production, you need a deep understanding of execution plans, and as much accurate, deep knowledge about SQL Server as you can lay your hands on.  The advanced database developer has a wide range of tools to use in writing queries that perform well in a range of circumstances. By the way, the examples in this post were written for SQL Server 2008.  They will run on 2005 and demonstrate the same principles, but you won’t get the same figures I did because 2005 had a rather nasty bug in the Top N Sort operator.  Fair warning: if you do decide to run the scripts on a 2005 instance (particularly the parallel query) do it before you head out for lunch… This post is dedicated to the people of Christchurch, New Zealand. © 2011 Paul White email: @[email protected] twitter: @SQL_Kiwi

  Read the article

• How do I add PHP support to Apache 2 without breaking my current installation?

  - by Hobhouse

  I run Apache 2 with WSGI (for a Django-app) on a Ubuntu box. I want to use Nagios for server monitoring, and for this purpose it seems I have to add PHP support to Apache. When I installed Apache 2, I did this: apt-get install apache2 apache2.2-common apache2-mpm-worker apache2-threaded-dev libapache2-mod-wsgi python-dev Available modules for apache2 are these: /etc/apache2/mods-available$ ls actions.conf authn_default.load cache.load deflate.conf filter.load mime.conf proxy_ftp.load suexec.load actions.load authn_file.load cern_meta.load deflate.load headers.load mime.load proxy_http.load unique_id.load alias.conf authnz_ldap.load cgi.load dir.conf ident.load mime_magic.conf rewrite.load userdir.conf alias.load authz_dbm.load cgid.conf dir.load imagemap.load mime_magic.load setenvif.conf userdir.load asis.load authz_default.load cgid.load disk_cache.conf include.load negotiation.conf setenvif.load usertrack.load auth_basic.load authz_groupfile.load charset_lite.load disk_cache.load info.conf negotiation.load speling.load version.load auth_digest.load authz_host.load dav.load dump_io.load info.load proxy.conf ssl.conf vhost_alias.load authn_alias.load authz_owner.load dav_fs.conf env.load ldap.load proxy.load ssl.load wsgi.conf authn_anon.load authz_user.load dav_fs.load expires.load log_forensic.load proxy_ajp.load status.conf wsgi.load authn_dbd.load autoindex.conf dav_lock.load ext_filter.load mem_cache.conf proxy_balancer.load status.load authn_dbm.load autoindex.load dbd.load file_cache.load mem_cache.load proxy_connect.load substitute.load What is the best way for me to add PHP support to Apache 2 without breaking my current installation and configuration?

  Read the article

• .htaccess - RewriteRules working, but browser address bar displaying full (unfriendly) URL

  - by axol

  Hey there, Haven't been able to find a solution to this around the net or these forums - apologise if I've missed something! My .htaccess RewriteRules are working well - have search-engine and user -friendly links in my web pages, and unfriendly database URLs running hidden in the background. Except when I added a RewriteRule to add "www." to the front of URLs if the user didn't enter it - to ensure only one appears in search engines. Here's what now happening, and I can't figure out why! My friendly URL structure for content is like this, and the database query string uses the first "importantword": www.example.com/importantword-nonimportantword/ .htaccess snippet: Options +FollowSymLinks Options -Indexes RewriteEngine on RewriteOptions MaxRedirects=10 RewriteBase / RewriteRule ^/$ index.php [L] RewriteRule ^(.*)-(.*)/overview/$ detail.php?categoryID=$1 [L] RewriteCond %{HTTP_HOST} !^www.example.com$ RewriteRule ^(.*)$ http://www.example.com/$1 [L] What's happening since I added the last 2 lines: CASE 1: user types (or clicks) www.example.com/honda-vehicle/overview/ - Works correctly - They are taken to the correct page and the browser URL bar says: www.example.com/honda-vehicles/overview/ CASE 2: user types example.com - Works correctly - They are taken to www.example.com and the browser URL bar says: www.example.com CASE 3: user types (or clicks) example.com/honda-vehicles/overview/ i.e. without the prefix "www" - Does NOT work correctly - They are taken to the right page, but the browser URL bar displays the unfriendly URL: www.example.com/detail.php?categoryID=honda I figure there's some issue with the order of the RewriteRules, but it's doing my head in trying to logically step through it and figure it out! Any assistance at all or pointers would be most appreciated!

  Read the article

• dll's loaded through reflection - Phantom Bug

  - by Seattle Leonard

  Ok, I got a strange one here and I want to know if any of you have ever run accross anything like it. So I've got this web app that loads up a bunch of dll's through reflection. Basically it looks for Types that are derived from certain abstract types and adds them to the list of things it can make. Here's the weird part. While developing there is never a problem. When installing it, there is never a problem to start with. Then, at a seemingly random time, the application breaks while trying to find all the types. I've had 2 sites sitting side by side and one worked while the other did not, and they were configured exactly(and I mean exactly) the same. IISRESET's never helped, but this did: I simply moved all the dll's out of the bin directory then moved them back. That's right I just moved them out of the bin directory then put them right back where they came from and everything worked fine. Any ideas? Got some more info When the site is working I notice this behavior: After IISRESET it still works, but recycling the app pool will cause it to break. When the site is broken: Neiter IISRESET nor recycling the app pool fixes it, but moving a single dll out then back in fixes it.

  Read the article

• Indy IdSMTP and attachments in Thunderbird

  - by Lobuno

  Hello! Using the latest snapshot of Indy tiburon on D2010. A very simple project like: var stream: TFileStream; (s is TidSMTP and m is TidMessage) begin s.Connect; Stream := TFileStream.Create('c:\Test.zip', fmOpenRead or fmShareExclusive); try with TIdAttachmentMemory.Create(m.MessageParts, Stream) do begin ContentType := 'application/x-zip-compressed'; Name := ExtractFilePath('C:\'); //' FileName := 'Test.zip'; end; finally FreeAndNil(Stream); end; s.Send(m); s.Disconnect(); end; Everything works Ok in Outlook, The bat!, OE, yahoo, etc... but in Thunderbird the attachment is not shown. Looking at the source of the message in Thunderbird, the attachment is there. The only difference I can find between messages send by indy and other clients is that Indy messages have this order: Content-Type: multipart/mixed; boundary="Z\=_7oeC98yIhktvxiwiDTVyhv9R9gwkwT1" MIME-Version: 1.0 while any other clients have the order: MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="Z\=_7oeC98yIhktvxiwiDTVyhv9R9gwkwT1" Don't know if THAT is the source of the problem, but if so: is this a bug on Thunderbird or is this a problem with indy which "malforms" the headers of the messages? Is this order a problem? Does that matter anyway?

  Read the article

• How do I use a .NET class in VBA? Syntax help!

  - by Jordan S

  ok I have couple of .NET classes that I want to use in VBA. So I must register them through COM and all that. I think I have the COM registration figured out (finally) but now I need help with the syntax of how to create the objects. Here is some pseudo code showing what I am trying to do. EDIT: Changed Attached Objects to return an ArrayList instead of a List The .NET classes look like this... public class ResourceManagment { public ResourceManagment() { // Default Constructor } public static List<RandomObject> AttachedObjects() { ArrayList list = new ArrayList(); return list; } } public class RandomObject { // public RandomObject(int someParam) { } } OK, so this is what I would like to do in VBA (demonstrated in C#) but I don't know how... public class VBAClass { public void main() { ArrayList myList = ResourceManagment.AttachedObjects(); foreach(RandomObject x in myList) { // Do something with RandomObject x like list them in a Combobox } } } One thing to note is that RandomObject does not have a public default constructor. So I can not create an instance of it like Dim x As New RandomObject. MSDN says that you can not instantiate an object that doesn't have a default constructor through COM but you can still use the object type if it is returned by another method... Types must have a public default constructor to be instantiated through COM. Managed, public types are visible to COM. However, without a public default constructor (a constructor without arguments), COM clients cannot create an instance of the type. COM clients can still use the type if the type is instantiated in another way and the instance is returned to the COM client. You may include overloaded constructors that accept varying arguments for these types. However, constructors that accept arguments may only be called from managed (.NET) code. Added: Here is my attempt in VB: Dim count As Integer count = 0 Dim myObj As New ResourceManagment For Each RandomObject In myObj.AttachedObjects count = count + 1 Next RandomObject

  Read the article

• Django Upload form to S3 img and form validation

  - by citadelgrad

  I'm fairly new to both Django and Python. This is my first time using forms and upload files with django. I can get the uploads and saves to the database to work fine but it fails to valid email or check if the users selected a file to upload. I've spent a lot of time reading documentation trying to figure this out. Thanks! views.py def submit_photo(request): if request.method == 'POST': def store_in_s3(filename, content): conn = S3Connection(AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY) bucket = conn.create_bucket(AWS_STORAGE_BUCKET_NAME) mime = mimetypes.guess_type(filename)[0] k = Key(bucket) k.key = filename k.set_metadata("Content-Type", mime) k.set_contents_from_file(content) k.set_acl('public-read') if imghdr.what(request.FILES['image_url']): qw = request.FILES['image_url'] filename = qw.name image = filename content = qw.file url = "http://bpd-public.s3.amazonaws.com/" + image data = {image_url : url, user_email : request.POST['user_email'], user_twittername : request.POST['user_twittername'], user_website : request.POST['user_website'], user_desc : request.POST['user_desc']} s = BeerPhotos(data) if s.is_valid(): #import pdb; pdb.set_trace() s.save() store_in_s3(filename, content) return HttpResponseRedirect(reverse('photos.views.thanks')) return s.errors else: return errors else: form = BeerPhotoForm() return render_to_response('photos/submit_photos.html', locals(),context_instance=RequestContext(request) forms.py class BeerPhotoForm(forms.Form): image_url = forms.ImageField(widget=forms.FileInput, required=True,label='Beer',help_text='Select a image of no more than 2MB.') user_email = forms.EmailField(required=True,help_text='Please type a valid e-mail address.') user_twittername = forms.CharField() user_website = forms.URLField(max_length=128,) user_desc = forms.CharField(required=True,widget=forms.Textarea,label='Description',) template.html <div id="stylized" class="myform"> <form action="." method="post" enctype="multipart/form-data" width="450px"> <h1>Photo Submission</h1> {% for field in form %} {{ field.errors }} {{ field.label_tag }} {{ field }} {% endfor %} <label><span>Click here</span></label> <input type="submit" class="greenbutton" value="Submit your Photo" /> </form> </div>

  Read the article

• Why can't I use WCF DataContract and ISerializable on the same class?

  - by Dave

  Hi all, I have a class that I need to be able to serialize to a SQLServer session variable and be available over a WCF Service. I have declared it as follows namespace MyNM { [Serializable] [DataContract(Name = "Foo", Namespace = "http://www.mydomain.co.uk")] public class Foo : IEntity, ISafeCopy<Foo> { [DataMember(Order = 0)] public virtual Guid Id { get; set; } [DataMember(Order = 1)] public virtual string a { get; set; } DataMember(Order = 2)] public virtual Bar c { get; set; } /* ISafeCopy implementation */ } [Serializable] [DataContract(Name = "Bar ", Namespace = "http://www.mydomain.co.uk")] public class Bar : IEntity, ISafeCopy<Bar> { #region Implementation of IEntity DataMember(Order = 0)] public virtual Guid Id { get; set; } [DataMember(Order = 1)] public virtual Baz y { get; set; } #endregion /* ISafeCopy implementation*/ } [Serializable] [DataContract] public enum Baz { [EnumMember(Value = "one")] one, [EnumMember(Value = "two")] two, [EnumMember(Value = "three")] three } But when I try and call this service, I get the following error in the trace log. "System.Runtime.Serialization.InvalidDataContractException: Type 'BarProxybcb100e8617f40ceaa832fe4bb94533c' cannot be ISerializable and have DataContractAttribute attribute." If I take out the Serializable attribute, the WCF service works, but when the object can't be serialized to session. If I remove the DataContract attribute from class Bar, the WCF service fails saying Type 'BarProxy3bb05a31167f4ba492909ec941a54533' with data contract name 'BarProxy3bb05a31167f4ba492909ec941a54533:http://schemas.datacontract.org/2004/07/' is not expected. Add any types not known statically to the list of known types - for example, by using the KnownTypeAttribute attribute or by adding them to the list of known types passed to DataContractSerializer I've tried adding a KnownType attribute to the foo class [KnownType(typeof(Bar))] But I still get the same error. Can anyone help me out with this? Many thanks Dave

  Read the article

• Implementing BindingList<T>

  - by EtherealMonkey

  I am trying to learn more about BindingList because I believe that it will help me with a project that I am working on. Currently, I have an object class (ScannedImage) that is a subtype of a class (HashedImage) that subtypes a native .Net object (Image). There is no reason why I couldn't move the two subtypes together. I am simply subtyping an object that I had previously constructed, but I will now be storing my ScannedImage object in an RDB (well, not technically - only the details and probably the thumbnail). Also, the object class has member types that are my own custom types (Keywords). I am using a custom datagridview to present these objects, but am handling all changes to the ScannedImage object with my own code. As you can probably imagine, I have quite a few events to handle that occur in these base types. So, if I changed my object to implement INotifyPropertyChanged, would the object collection (implementing BindingList) receive notifications of changes to the ScannedImage object? Also, if Keywords were to implement INotifyPropertyChanged, would changes be accessible to the BindingList through the ScannedImage object? Sorry if this seems rather newbish. I only recently discovered the BindingList and not having formal training in C# programming - am having a difficult time moving forward with this. Also, if anyone has any good reference material, I would be thankful for links. Obviously, I have perused the MSDN Library. I have found a few good links on the web, but it seems that a lot of people are now using WPF and ObservableCollection. My project is based on Winforms and .Net3.5 framework. TIA

  Read the article

• Exporting non-public type through public API

  - by feelgood

  What if I have few factory methods returning non-public type and pairing set of methods which gives variables of this non-public type? This results with titled warning message in NetBeans. In result public API will contain only two pairing sets of methods. The reason is to make my type hierarchy sealed (like seald classes in Scala) and allow users only instantiate these types through factory methods. So we get DSL in some sense. For example, Schedule class represented by calendar fields' contraints. There are some types of contraints - Range, Singleton, List, FullSet - with NumberSet interface as a root. We don't want to expose these types and how Schedule interact with them. We just want the specification from the user. So we make NumberSet package-private. In class Schedule we create few factory-methods for constraints: NumberSet singleton(int value); NumberSet range(int form, int to); NumberSet list(NumberSet ... components); and some methods for creating Schedule object: Schedule everyHour(NumberSet minutes); Schedule everyDay(NumberSet minutes, NumberSet hours); User can only use them in the manner: Schedule s = Schedule.everyDay( singleton(0), list(range(10-15), singleton(8)) ); Is it bad idea?

  Read the article

• Toolbar hiding on rotated UISplitView DetailView

  - by Gerry

  I've based my app on Apple's SplitView project type. I have a TableView as the Master, and am using different types of views as the Detail view. To select types of detail view, I'm using the fancy concept of buttons on my DetailView toolbar. When the DetailView is derived from UIViewController, everything is good. When the DetailView derives from UIViewController, but contains a UITableView then I have problems. In portrait view the toolbar is visible. In landscape mode the toolbar is hidden, even though the Tableview is moved down to allow space for it. The UIToolbar and UITableView are both defined in my NIB file which is loaded to create the detail view. Why is my toolbar invisible in landscape? BTW, is this the best way to choose Detail view types with UISplitView? Bonus question, what if selecting a row in my DetailView tableview should bring up another View, I can't push it like I would with a NaviagtionController, so how do I go back to the detail tableview? Thanks, Gerry

  Read the article

• Svn import with auto-props & pre-commit hook

  - by James Tisato

  My company's svn repo has a lot of MS Word docs in it. We've implemented a policy that all .doc files must have the svn:needs-lock property set to prevent parallel access on files that are hard to merge (we've also done this for xls, ppt, pdf etc.). We've implemented the policy by distributing a svn config with auto-props set appropriately for all relevant document types. We've also set up a pre-commit hook that checks that all added files of these types have the needs-lock property set (i.e. if they forget/are too lazy to update their svn config file, they won't be able to add any docs to the repo). The problem I'm having, however, is that the pre-commit hook fails when users try to import files into the repo, e.g. some users like to add files directly thru TortoiseSVN's Repo Browser, which effectively is an svn import. Through testing on other file types, I have seen that doing an import does in fact apply the auto-props listed in my config, but they don't seem to be applied at the point that the pre-commit hook runs. When importing .doc files, the hook fails, saying that the needs-lock property is missing. Is there really much difference between adding a single file to a working copy and committing it vs importing a file directly? Do we need to tailor our precommit hook in some way to cater for this scenario?

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >