Search Results

Search found 10169 results on 407 pages for 'port'.

Page 76/407 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • NVIDIA 550M Drivers

    - by DOOM
    First to say, I am newbie, to the linux world and in situation where i have to get used to using ubuntu. My system is: i7-2630QM 8GB Ram with 750GB HD + NVIDIa 550M (1GB) Since i was facing problems with wubi - "slow Ubuntu", i installed it on a separate partition, of 80GB (10GB Swap, 40GB HOME, 30GB ROOT). The system was running fine, before I started using some "CFD" (Graphics Dependent) application. I needed to use "paraview" a graphics software, to design some engineering stuff. Following the installation problems, i installed something called "messa" on my system. The software works but, now my system is "dead-slow". Even with the computer at an idle state, the laptop, is pretty slow, and with huge annoying fan noise. I was tried running some similar applications with windows, and it turns out that its not a hardware, but has to do with the GPU drivers. Following some forums, I installed the "nvidia-current" and now everything is the same. I know, there are many solutions on this forum for nvidia-driver updates, but as you see, nothings working my way. Please someone, tell me what is that I am doing wrong :( This is the output from my terminal for the command lspci | grep 'intel' 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)

    Read the article

  • 13.10 upgrade dropping wifi [on hold]

    - by Daryl
    Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

    Read the article

  • vga_switcheroo and Intel HD 3000 on Ubuntu 12.04

    - by Ikalou
    I'm trying to get vga_switcheroo to enable my integrated Intel HD 3000 instead of my ATI card. My problem is that there is no vgaswitcheroo directory in /sys/kernel/debug/ on my system. > grep -i switcheroo /boot/config-3.2.0-26-generic CONFIG_VGA_SWITCHEROO=y And yet: > sudo ls /sys/kernel/debug/ acpi bdi bluetooth dri extfrag gpio ieee80211 kprobes mce mmc0 regmap regulator sched_features suspend_stats tracing usb wakeup_sources x86 I am NOT using the fglrx driver. Here is the output of lspci; glxinfo | grep renderer: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Caicos HDMI Audio [Radeon HD 6400 Series] 24:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (rev 30) 24:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 24:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 25:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 26:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) OpenGL renderer string: Gallium 0.4 on AMD CAICOS Both xserver-xorg-video-intel and xserver-xorg-video-radeon packages are installed. I know there are tons of posts about hybrid-graphics already but I couldn't quite find a solution to my problem. Does anyone know why is /sys/kernel/debug/vgaswitcheroo not showing?

    Read the article

  • How to set a default value in an IF snippet?

    - by kuti
    Hello, I have the following snippet in a bash script written in Solaris 10: printf "port(389)=" read PORT if [[ $PORT == "" ]]; then PORT=389 fi What I am trying to get that if the user hits the enter key, the Port should be set to 389. The snippet above does not seem to be working. Any suggestions?

    Read the article

  • video and file caching with squid lusca?

    - by moon
    hello all i have configured squid lusca on ubuntu 11.04 version and also configured the video caching but the problem is the squid cannot configure the video more than 2 min long and the file of size upto 5.xx mbs only. here is my config please guide me how can i cache the long videos and files with squid: > # PORT and Transparent Option http_port 8080 transparent server_http11 on icp_port 0 > > # Cache Directory , modify it according to your system. > # but first create directory in root by mkdir /cache1 > # and then issue this command chown proxy:proxy /cache1 > # [for ubuntu user is proxy, in Fedora user is SQUID] > # I have set 500 MB for caching reserved just for caching , > # adjust it according to your need. > # My recommendation is to have one cache_dir per drive. zzz > > #store_dir_select_algorithm round-robin cache_dir aufs /cache1 500 16 256 cache_replacement_policy heap LFUDA memory_replacement_policy heap > LFUDA > > # If you want to enable DATE time n SQUID Logs,use following emulate_httpd_log on logformat squid %tl %6tr %>a %Ss/%03Hs %<st %rm > %ru %un %Sh/%<A %mt log_fqdn off > > # How much days to keep users access web logs > # You need to rotate your log files with a cron job. For example: > # 0 0 * * * /usr/local/squid/bin/squid -k rotate logfile_rotate 14 debug_options ALL,1 cache_access_log /var/log/squid/access.log > cache_log /var/log/squid/cache.log cache_store_log > /var/log/squid/store.log > > #I used DNSAMSQ service for fast dns resolving > #so install by using "apt-get install dnsmasq" first dns_nameservers 127.0.0.1 101.11.11.5 ftp_user anonymous@ ftp_list_width 32 ftp_passive on ftp_sanitycheck on > > #ACL Section acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl > to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 # https, snews > acl SSL_ports port 873 # rsync acl Safe_ports port 80 # http acl > Safe_ports port 21 # ftp acl Safe_ports port 443 563 # https, snews > acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl > Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port > 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port > 591 # filemaker acl Safe_ports port 777 # multiling http acl > Safe_ports port 631 # cups acl Safe_ports port 873 # rsync acl > Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method > CONNECT http_access allow manager localhost http_access deny manager > http_access allow purge localhost http_access deny purge http_access > deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow > localhost http_access allow all http_reply_access allow all icp_access > allow all > > #========================== > # Administrative Parameters > #========================== > > # I used UBUNTU so user is proxy, in FEDORA you may use use squid cache_effective_user proxy cache_effective_group proxy cache_mgr > [email protected] visible_hostname proxy.aacable.net unique_hostname > [email protected] > > #============= > # ACCELERATOR > #============= half_closed_clients off quick_abort_min 0 KB quick_abort_max 0 KB vary_ignore_expire on reload_into_ims on log_fqdn > off memory_pools off > > # If you want to hide your proxy machine from being detected at various site use following via off > > #============================================ > # OPTIONS WHICH AFFECT THE CACHE SIZE / zaib > #============================================ > # If you have 4GB memory in Squid box, we will use formula of 1/3 > # You can adjust it according to your need. IF squid is taking too much of RAM > # Then decrease it to 128 MB or even less. > > cache_mem 256 MB minimum_object_size 512 bytes maximum_object_size 500 > MB maximum_object_size_in_memory 128 KB > > #============================================================$ > # SNMP , if you want to generate graphs for SQUID via MRTG > #============================================================$ > #acl snmppublic snmp_community gl > #snmp_port 3401 > #snmp_access allow snmppublic all > #snmp_access allow all > > #============================================================ > # ZPH , To enable cache content to be delivered at full lan speed, > # To bypass the queue at MT. > #============================================================ tcp_outgoing_tos 0x30 all zph_mode tos zph_local 0x30 zph_parent 0 > zph_option 136 > > # Caching Youtube acl videocache_allow_url url_regex -i \.youtube\.com\/get_video\? acl videocache_allow_url url_regex -i > \.youtube\.com\/videoplayback \.youtube\.com\/videoplay > \.youtube\.com\/get_video\? acl videocache_allow_url url_regex -i > \.youtube\.[a-z][a-z]\/videoplayback \.youtube\.[a-z][a-z]\/videoplay > \.youtube\.[a-z][a-z]\/get_video\? acl videocache_allow_url url_regex > -i \.googlevideo\.com\/videoplayback \.googlevideo\.com\/videoplay \.googlevideo\.com\/get_video\? acl videocache_allow_url url_regex -i > \.google\.com\/videoplayback \.google\.com\/videoplay > \.google\.com\/get_video\? acl videocache_allow_url url_regex -i > \.google\.[a-z][a-z]\/videoplayback \.google\.[a-z][a-z]\/videoplay > \.google\.[a-z][a-z]\/get_video\? acl videocache_allow_url url_regex > -i proxy[a-z0-9\-][a-z0-9][a-z0-9][a-z0-9]?\.dailymotion\.com\/ acl videocache_allow_url url_regex -i vid\.akm\.dailymotion\.com\/ acl > videocache_allow_url url_regex -i > [a-z0-9][0-9a-z][0-9a-z]?[0-9a-z]?[0-9a-z]?\.xtube\.com\/(.*)flv acl > videocache_allow_url url_regex -i \.vimeo\.com\/(.*)\.(flv|mp4) acl > videocache_allow_url url_regex -i > va\.wrzuta\.pl\/wa[0-9][0-9][0-9][0-9]? acl videocache_allow_url > url_regex -i \.youporn\.com\/(.*)\.flv acl videocache_allow_url > url_regex -i \.msn\.com\.edgesuite\.net\/(.*)\.flv acl > videocache_allow_url url_regex -i \.tube8\.com\/(.*)\.(flv|3gp) acl > videocache_allow_url url_regex -i \.mais\.uol\.com\.br\/(.*)\.flv acl > videocache_allow_url url_regex -i > \.blip\.tv\/(.*)\.(flv|avi|mov|mp3|m4v|mp4|wmv|rm|ram|m4v) acl > videocache_allow_url url_regex -i > \.apniisp\.com\/(.*)\.(flv|avi|mov|mp3|m4v|mp4|wmv|rm|ram|m4v) acl > videocache_allow_url url_regex -i \.break\.com\/(.*)\.(flv|mp4) acl > videocache_allow_url url_regex -i redtube\.com\/(.*)\.flv acl > videocache_allow_dom dstdomain .mccont.com .metacafe.com > .cdn.dailymotion.com acl videocache_deny_dom dstdomain > .download.youporn.com .static.blip.tv acl dontrewrite url_regex > redbot\.org \.php acl getmethod method GET > > storeurl_access deny dontrewrite storeurl_access deny !getmethod > storeurl_access deny videocache_deny_dom storeurl_access allow > videocache_allow_url storeurl_access allow videocache_allow_dom > storeurl_access deny all > > storeurl_rewrite_program /etc/squid/storeurl.pl > storeurl_rewrite_children 7 storeurl_rewrite_concurrency 10 > > acl store_rewrite_list urlpath_regex -i > \/(get_video\?|videodownload\?|videoplayback.*id) acl > store_rewrite_list urlpath_regex -i \.flv$ \.mp3$ \.mp4$ \.swf$ \ > storeurl_access allow store_rewrite_list storeurl_access deny all > > refresh_pattern -i \.flv$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.mp3$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth refresh_pattern -i \.mp4$ > 10080 80% 10080 override-expire override-lastmod reload-into-ims > ignore-reload ignore-no-cache ignore-private ignore-auth > refresh_pattern -i \.swf$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.gif$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth refresh_pattern -i \.jpg$ > 10080 80% 10080 override-expire override-lastmod reload-into-ims > ignore-reload ignore-no-cache ignore-private ignore-auth > refresh_pattern -i \.jpeg$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.exe$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth > > # 1 year = 525600 mins, 1 month = 10080 mins, 1 day = 1440 refresh_pattern (get_video\?|videoplayback\?|videodownload\?|\.flv?) > 10080 80% 10080 ignore-no-cache ignore-private override-expire > override-lastmod reload-into-ims refresh_pattern > (get_video\?|videoplayback\?id|videoplayback.*id|videodownload\?|\.flv?) > 10080 80% 10080 ignore-no-cache ignore-private override-expire > override-lastmod reload-into-ims refresh_pattern \.(ico|video-stats) > 10080 80% 10080 override-expire ignore-reload ignore-no-cache > ignore-private ignore-auth override-lastmod negative-ttl=10080 > refresh_pattern \.etology\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern galleries\.video(\?|sz) 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern brazzers\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern \.adtology\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern > ^.*(utm\.gif|ads\?|rmxads\.com|ad\.z5x\.net|bh\.contextweb\.com|bstats\.adbrite\.com|a1\.interclick\.com|ad\.trafficmp\.com|ads\.cubics\.com|ad\.xtendmedia\.com|\.googlesyndication\.com|advertising\.com|yieldmanager|game-advertising\.com|pixel\.quantserve\.com|adperium\.com|doubleclick\.net|adserving\.cpxinteractive\.com|syndication\.com|media.fastclick.net).* > 10080 20% 10080 ignore-no-cache ignore-private override-expire > ignore-reload ignore-auth negative-ttl=40320 max-stale=10 > refresh_pattern ^.*safebrowsing.*google 10080 80% 10080 > override-expire ignore-reload ignore-no-cache ignore-private > ignore-auth negative-ttl=10080 refresh_pattern > ^http://((cbk|mt|khm|mlt)[0-9]?)\.google\.co(m|\.uk) 10080 80% > 10080 override-expire ignore-reload ignore-private negative-ttl=10080 > refresh_pattern ytimg\.com.*\.jpg > 10080 80% 10080 override-expire ignore-reload refresh_pattern > images\.friendster\.com.*\.(png|gif) 10080 80% > 10080 override-expire ignore-reload refresh_pattern garena\.com > 10080 80% 10080 override-expire reload-into-ims refresh_pattern > photobucket.*\.(jp(e?g|e|2)|tiff?|bmp|gif|png) 10080 80% > 10080 override-expire ignore-reload refresh_pattern > vid\.akm\.dailymotion\.com.*\.on2\? 10080 80% > 10080 ignore-no-cache override-expire override-lastmod refresh_pattern > mediafire.com\/images.*\.(jp(e?g|e|2)|tiff?|bmp|gif|png) 10080 80% > 10080 reload-into-ims override-expire ignore-private refresh_pattern > ^http:\/\/images|pics|thumbs[0-9]\. 10080 80% > 10080 reload-into-ims ignore-no-cache ignore-reload override-expire > refresh_pattern ^http:\/\/www.onemanga.com.*\/ > 10080 80% 10080 reload-into-ims ignore-no-cache ignore-reload > override-expire refresh_pattern > ^http://v\.okezone\.com/get_video\/([a-zA-Z0-9]) 10080 80% 10080 > override-expire ignore-reload ignore-no-cache ignore-private > ignore-auth override-lastmod negative-ttl=10080 > > #images facebook refresh_pattern -i \.facebook.com.*\.(jpg|png|gif) 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern -i \.fbcdn.net.*\.(jpg|gif|png|swf|mp3) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern static\.ak\.fbcdn\.net*\.(jpg|gif|png) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern ^http:\/\/profile\.ak\.fbcdn.net*\.(jpg|gif|png) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > > #All File refresh_pattern -i \.(3gp|7z|ace|asx|bin|deb|divx|dvr-ms|ram|rpm|exe|inc|cab|qt) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(rar|jar|gz|tgz|bz2|iso|m1v|m2(v|p)|mo(d|v)|arj|lha|lzh|zip|tar) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(jp(e?g|e|2)|gif|pn[pg]|bm?|tiff?|ico|swf|dat|ad|txt|dll) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(avi|ac4|mp(e?g|a|e|1|2|3|4)|mk(a|v)|ms(i|u|p)|og(x|v|a|g)|rm|r(a|p)m|snd|vob) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(pp(t?x)|s|t)|pdf|rtf|wax|wm(a|v)|wmx|wpl|cb(r|z|t)|xl(s?x)|do(c?x)|flv|x-flv) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims > > refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern ^gopher: > 1440 0% 1440 refresh_pattern ^ftp: 10080 95% 10080 > override-lastmod reload-into-ims refresh_pattern . 1440 > 95% 10080 override-lastmod reload-into-ims

    Read the article

  • trying to use mod_proxy with httpd and tomcat

    - by techsjs2012
    I been trying to use mod_proxy with httpd and tomcat... I have on VirtualBox running Scientific Linux which has httpd and tomcat 6 on it.. I made two nodes of tomcat6. I followed this guide like 10 times and still cant get the 2nd node of tomcat working.. http://www.richardnichols.net/2010/08/5-minute-guide-clustering-apache-tomcat/ Here is the lines from my http.conf file <Proxy balancer://testcluster stickysession=JSESSIONID> BalancerMember ajp://127.0.0.1:8009 min=10 max=100 route=node1 loadfactor=1 BalancerMember ajp://127.0.0.1:8109 min=10 max=100 route=node2 loadfactor=1 </Proxy> ProxyPass /examples balancer://testcluster/examples <Location /balancer-manager> SetHandler balancer-manager AuthType Basic AuthName "Balancer Manager" AuthUserFile "/etc/httpd/conf/.htpasswd" Require valid-user </Location> Now here is my server.xml from node1 <?xml version='1.0' encoding='utf-8'?> <!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --> <!-- Note: A "Server" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/server.html --> <Server port="8005" shutdown="SHUTDOWN"> <!--APR library loader. Documentation at /docs/apr.html --> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> <Listener className="org.apache.catalina.core.JasperListener" /> <!-- Prevent memory leaks due to use of particular java/javax APIs--> <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" /> <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html --> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> <!-- Global JNDI resources Documentation at /docs/jndi-resources-howto.html --> <GlobalNamingResources> <!-- Editable user database that can also be used by UserDatabaseRealm to authenticate users --> <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources> <!-- A "Service" is a collection of one or more "Connectors" that share a single "Container" Note: A "Service" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/service.html --> <Service name="Catalina"> <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine name="Catalina" defaultHost="localhost" jvmRoute="node1"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> --> <!-- The request dumper valve dumps useful debugging information about the request and response data received and sent by Tomcat. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.RequestDumperValve"/> --> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <!-- Define the default virtual host Note: XML Schema validation will not work with Xerces 2.2. --> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/> --> </Host> </Engine> </Service> </Server> now here is the server.xml file from node2 <?xml version='1.0' encoding='utf-8'?> <!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --> <!-- Note: A "Server" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/server.html --> <Server port="8105" shutdown="SHUTDOWN"> <!--APR library loader. Documentation at /docs/apr.html --> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> <Listener className="org.apache.catalina.core.JasperListener" /> <!-- Prevent memory leaks due to use of particular java/javax APIs--> <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" /> <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html --> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> <!-- Global JNDI resources Documentation at /docs/jndi-resources-howto.html --> <GlobalNamingResources> <!-- Editable user database that can also be used by UserDatabaseRealm to authenticate users --> <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources> <!-- A "Service" is a collection of one or more "Connectors" that share a single "Container" Note: A "Service" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/service.html --> <Service name="Catalina"> <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8109" protocol="AJP/1.3" redirectPort="8443" /> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine name="Catalina" defaultHost="localhost" jvmRoute="node2"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> --> <!-- The request dumper valve dumps useful debugging information about the request and response data received and sent by Tomcat. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.RequestDumperValve"/> --> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <!-- Define the default virtual host Note: XML Schema validation will not work with Xerces 2.2. --> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/> --> </Host> </Engine> </Service> </Server> I dont know what it is. but I been trying for days

    Read the article

  • Reuse remote ssh connections and reduce command/session logging verbosity?

    - by ewwhite
    I have a number of systems that rely on application-level mirroring to a secondary server. The secondary server pulls data by means of a series of remote SSH commands executed on the primary. The application is a bit of a black box, and I may not be able to make modifications to the scripts that are used. My issue is that the logging in /var/log/secure is absolutely flooded with requests from the service user, admin. These commands occur many times per second and have a corresponding impact on logs. They rely on passphrase-less key exchange. The OS involved is EL5 and EL6. Example below. Is there any way to reduce the amount of logging from these actions. (By user? By source?) Is there a cleaner way for the developers to perform these ssh executions without spawning so many sessions? Seems inefficient. Can I reuse the existing connections? Example log output: Jul 24 19:08:54 Cantaloupe sshd[46367]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46446]: Accepted publickey for admin from 172.30.27.32 port 33526 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46446]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46446]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46475]: Accepted publickey for admin from 172.30.27.32 port 33527 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46475]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46475]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46504]: Accepted publickey for admin from 172.30.27.32 port 33528 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46504]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46504]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46583]: Accepted publickey for admin from 172.30.27.32 port 33529 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46583]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46583]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46612]: Accepted publickey for admin from 172.30.27.32 port 33530 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46612]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46612]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46641]: Accepted publickey for admin from 172.30.27.32 port 33531 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46641]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46641]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46720]: Accepted publickey for admin from 172.30.27.32 port 33532 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46720]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46720]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46749]: Accepted publickey for admin from 172.30.27.32 port 33533 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46749]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46749]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46778]: Accepted publickey for admin from 172.30.27.32 port 33534 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46778]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46778]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46857]: Accepted publickey for admin from 172.30.27.32 port 33535 ssh2

    Read the article

  • Slow wifi on Ubuntu 12.04 wifi driver ath9k

    - by lunar
    For the last couple of days my wifi connection is extremely slow. I am pretty sure that it is caused by the driver. Can this be improved? lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"MyWiFi" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:68:FE:7B:C7 Bit Rate=58.5 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:6960 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 74:f0:6d:34:c2:4e width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d7400000-d740ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:4b:38:78:f6:ae capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128) lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1bb Chicony Electronics Co., Ltd Bus 001 Device 004: ID 0b05:1788 ASUSTek Computer, Inc. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 425M] (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB controller: Fresco Logic Device 1400 (rev 01) 06:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) rfkill list all 0: hci0: Bluetooth Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

    - by el10780
    After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

    Read the article

  • trying to setup wireless

    - by JohnMerlino
    I'm trying to set up wireless on vostro 1520 dell laptop, with latest Ubuntu install. Here's the output of some of the commands that I was told to run: lshw -C network viggy@ubuntu:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 03 serial: 00:24:e8:da:84:25 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.2.6 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:47 ioport:3000(size=256) memory:f6004000-f6004fff memory:f6000000-f6003fff memory:f6020000-f603ffff *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0e:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:fa000000-fa003fff *-network DISABLED description: Wireless interface physical id: 1 logical name: wlan0 serial: 0c:60:76:05:ee:74 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-29-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01) 1a:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01) 1a:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01) iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. At this point in time, I don't have wireless.

    Read the article

  • Pantech Link II, Ubuntu and Virtual XP

    - by user85041
    Okay this is my problem. I have a Pantech Link II, dmesg states: [ 896.072037] usb 2-3: new high-speed USB device number 3 using ehci_hcd [ 896.258562] cdc_acm 2-3:1.0: ttyACM0: USB ACM device [ 896.260039] usbcore: registered new interface driver cdc_acm [ 896.260042] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Have it installed through wine (pc suite and driver) and it doesn't see it. Virtual XP through VMWare Player sees my device, knows it needs a driver. The removable devices says Curitel Pantech USB Device (Maybe Driver). I have PC Suite installed in XP, I install the driver through the executable.. it says problem with installing hardware, and then it disappears. Ubuntu sees it after restart, but if I start XP with that driver installed, it disappears from both and I get these errors in dmesg: [ 1047.760555] /dev/vmmon[2882]: PTSC: initialized at 3093322000 Hz using TSC, TSCs are synchronized. [ 1048.174033] /dev/vmmon[2882]: Monitor IPI vector: 0 [ 1055.293060] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1055.293074] /dev/vmnet: port on hub 8 successfully opened [ 1055.293088] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1055.293094] /dev/vmnet: port on hub 8 successfully opened [ 1072.446305] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1072.446316] /dev/vmnet: port on hub 8 successfully opened [ 1072.446328] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1072.446334] /dev/vmnet: port on hub 8 successfully opened [ 1072.856024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1079.292024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1079.732024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1127.743034] NET: Registered protocol family 39 [ 1127.749320] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_ALLOC (cid=1522210225,result=4). [ 1144.104031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd [ 1144.412031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd [ 1155.889976] ehci_hcd 0000:00:13.2: force halt; handshake ffffc90000642024 00004000 00000000 -> -110 [ 1155.889980] ehci_hcd 0000:00:13.2: HC died; cleaning up [ 1155.890008] usb 2-3: USB disconnect, device number 3 [ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110 [ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3). [ 1658.392018] NET: Unregistered protocol family 39 [ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546450] /dev/vmnet: port on hub 8 successfully opened [ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546467] /dev/vmnet: port on hub 8 successfully opened [ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101) [ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13 lessa@X:~$ dmesg|tail [ 1155.890008] usb 2-3: USB disconnect, device number 3 [ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110 [ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3). [ 1658.392018] NET: Unregistered protocol family 39 [ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546450] /dev/vmnet: port on hub 8 successfully opened [ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546467] /dev/vmnet: port on hub 8 successfully opened [ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101) [ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13 I have tried uninstalling, and installing manually from the device manager update driver while it's still has the warning sign.. it doesn't see the drivers as valid. No idea how to fix this.. would prefer to not have to go to another computer. I'm not trying to do anything but get the pictures off of it. I have to restart ubuntu, plug in device, for ubuntu to see it correctly again. I am like a month and a half old linux newbie so I have no idea the commands I could use for this, and I don't have a memory card in the phone to mount.

    Read the article

  • VLAN support on Juniper EX - 2200 switches

    - by liv2hak
    I have 6 Juniper switches (EX - 2200) connected to each other as shown in the network topology below. I have two PC's that I am using PC1 - (used for configuring the 6 switches via minicom) PC2 - to monitor the traffic between the switches via the Ports that are marked with arrows in the diagram. STEP 1: I create a new vlan On Switch 3 (SW3) that includes Port 12 and Port 22. I also assign l3-interface to the vlan (vlan_2) with ip address - 192.168.1.7. Now I plug-in Port 0 of Switch 3 on PC2. Now I try pinging 192.168.1.7 from PC2 (192.168.1.10) I want to know what will happen? My postulation is that I will not be able to ping SW3 from PC2.This is because SW3 (Port 12 and Port 22) is a part of a vlan_2 and vlan_2 logically breaks up broadcast domains and so 192.168.1.7 will not be reachable from 192.168.1.10. Now I have an l3-interface on SW1 with IP 192.168.1.1 using default vlan( vlan-id 0). Similarly I have enabled IP on SW2 - 192.168.1.2 SW3 - 192.168.1.3 SW4 - 192.168.1.4 SW5 - 192.168.1.5 SW6 - 192.168.1.6 all using default vlan. Now I plug in Port 12 of SW3 (blue cable) into the PC2. I try to ping 192.168.1.1 from PC2. What will happen at this stage.? My postulation is that I will be able to ping switch 1.Is this correct? Also another question is that can a single port on a Switch be added multiple VLANS? I am a beginner at network configuration? Any help would be highly appreciated. (Please ignore the CISCO symbol on the switches in the diagram.All swithes are Junper EX 22-00.)

    Read the article

  • Cygwin, ssh, and git on Windows Server 2008

    - by Paul
    Hi everyone. I'm trying to setup a git repository on an existing Windows 2008 (R2) server. I have successfully installed Cygwin & added git and ssh to the packages, and everything works perfectly (thanks to Mark for his article on it). I can ssh to localhost on the server, and I can do git operations locally on the server. When I try to do either from the client, however, I get the "port 22, Bad file number" error. Detailed SSH output is limited to this: OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to {myserver} [{myserver}] port 22. debug1: connect to address {myserver} port 22: Attempt to connect timed out without establishing a connection ssh: connect to host {myserver} port 22: Bad file number Google tells me that this means I'm being blocked, usually, by a firewall. So, double-checked the firewall settings on the server, rule is there allowing port 22 traffic. I even tried turning off the firewall briefly, no change in behavior. I can ssh just fine from that client to other servers. The hosting company swears that there's no other firewalls blocking that server on port 22 (or any other port, they claim, but I find that hard to believe). I have another trouble ticket into them, just in case the first support person was full of it, but meanwhile I wanted to see if anyone could think of anything else it can be. Thanks, Paul

    Read the article

  • How to determine which ports are open/closed on a FIREWALL?

    - by Rahl
    It seems no one has asked this question before (most regard host-based firewalls). Anyone familiar with port scanning tools (e.g. nmap) knows all about SYN scanning, FIN scanning, and the like to determine open ports on a host machine. Question is though, how do you determine the open ports on a firewall itself (disregard whether the host you're trying to connect to behind the firewall has those particular ports open or closed). This is assuming the firewall is blocking your IP connection. Example: We all communicate with serverfault.com through port 80 (web traffic). A scan on a host would reveal port 80 is open. If serverfault.com is behind a firewall and still allows this traffic through, then we can assume the firewall has port 80 open also. Now let's assume the firewall is blocking you (e.g. your IP address is under the deny list or is missing in the allowed list). You know port 80 has to be open (it works for appropriate IP addresses), but when you (the disallowed IP) attempt any scanning, all port scan attempts on the firewall drop the packet (including port 80, which we know to be open). So, how might we accomplish a direct firewall scan to reveal open/closed ports on the firewall itself, while still using the disallowed IP?

    Read the article

  • Are HDMI to VGA Adapters Really Device-Specific?

    - by allquixotic
    There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

    Read the article

  • DD-WRT (WRT54G) and (THOMSON TG782) how to put them togather?

    - by FeRtoll
    Ok so let me explain, i bought WRT54G and successfully installed DD-WRT v24-sp1 (07/26/08) mini-special - build 9994. That's all ok no problems with it all normal functioning. And just to add (i don't need wireless, wireless is turned off always) What i want: ISP's router (TG782) from it's INTERNET port(out) cable "which was before in my pc" is connected to WRT54G's INTERNET port and then from WRT54G LAN port 1 to my pc. The problem: How do i connect and setup all? I have tried many times on many different ways but cant get it to work IF THE CABLE FROM TG782 IS CONNECTED TO WRT54G ON INTERNET PORT. If i connect the TG782 to Lan port 1 on WRT54G and my pc to lan port 2 then all works fine after i setup gateway and all. But i want to connect TG782 to Internet port of WRT54G because i need "Access Restrictions" and this only goes through WAN right? please correct me if i am wrong. What i have tried: This is how i have tried to setup all. The TG782 router ip is 192.168.1.1 And WRT54G ip is 192.168.1.30 so in WRT54G control panel i have setup like this: ----WAN Connection Type---- Connection Type: Automatic Configuration - DHCP STP: Disabled ----Router IP---- Local IP Address: 192.168.1.30 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 (the TG782) ----Network Address Server Settings (DHCP)---- DHCP Type: DHCP Server Start IP Address: 192.168.1.100 Maximum DHCP Users: 6 And this wont work i probably miss something more, if anyone can help i would be thankfull. Also i have to note that i have tried to set my network adapter on pc to use the gateway of WRT54G and ip 192.168.1.102 In short: i cant get it to work normal only as a switch! Thanks for any help! -------EDIT:------- Here is an image which maybe can help: http://img27.imageshack.us/img27/4227/allin1w.jpg

    Read the article

  • Abysmal transfer speeds on gigabit network

    - by Vegard Larsen
    I am having trouble getting my Gigabit network to work properly between my desktop computer and my Windows Home Server. When copying files to my server (connected through my switch), I am seeing file transfer speeds of below 10MB/s, sometimes even below 1MB/s. The machine configurations are: Desktop Intel Core 2 Quad Q6600 Windows 7 Ultimate x64 2x WD Green 1TB drives in striped RAID 4GB RAM AB9 QuadGT motherboard Realtek RTL8810SC network adapter Windows Home Server AMD Athlon 64 X2 4GB RAM 6x WD Green 1,5TB drives in storage pool Gigabyte GA-MA78GM-S2H motherboard Realtek 8111C network adapter Switch dLink Green DGS-1008D 8-port Both machines report being connected at 1Gbps. The switch lights up with green lights for those two ports, indicating 1Gbps. When connecting the machines through the switch, I am seeing insanely low speeds from WHS to the desktop measured with iperf: 10Kbits/sec (WHS is running iperf -c, desktop is iperf -s). Using iperf the other way (WHS is iperf -s, desktop iperf -c) speeds are also bad (~20Mbits/sec). Connecting the machines directly with a patch cable, I see much higher speeds when connecting from desktop to WHS (~300 Mbits/sec), but still around 10Kbits/sec when connecting from WHS to the desktop. File transfer speeds are also much quicker (both directions). Log from desktop for iperf connection from WHS (through switch): C:\temp>iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [248] local 192.168.1.32 port 5001 connected with 192.168.1.20 port 3227 [ ID] Interval Transfer Bandwidth [248] 0.0-18.5 sec 24.0 KBytes 10.6 Kbits/sec Log from desktop for iperf connection to WHS (through switch): C:\temp>iperf -c 192.168.1.20 ------------------------------------------------------------ Client connecting to 192.168.1.20, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 192.168.1.32 port 57012 connected with 192.168.1.20 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-10.3 sec 28.5 MBytes 23.3 Mbits/sec What is going on here? Unfortunately I don't have any other gigabit-capable devices to try with.

    Read the article

  • Network Misconfiguration when adding first host to new vSphere cluster

    - by dunxd
    I am building a new vSphere cluster from scratch. I have installed ESXi on the first host, and built a vCenter server on a VM residing on that host (storage is on the local hard drive, although we have iSCSI targets which I can reach from the host). The cluster is configured for HA. When I try and add the host to the cluster, I get an error at the point where HA is configured - Cannot complete the . I have stripped the network configuration of the host down to the most basic - a single NIC attached to a single vSwitch - this is running the VMKernel Port on VLAN 8 - that is our Management VLAN. The vCenter server will have a network address on this VLAN, so I also set the initial Virtual Machine Port Group to this VLAN, and connected the vCenter server NIC to this port group. I understand I can't connect the vCenter server to the VMkernel port group, but shouldn't I be able to connect the vCenter server to a Port Group in the same VLAN? If not, do I need to create a VLAN specifically for VMKernel Port Group? I plan to set up another port group for vMotion with a dedicated and isolated VLAN (i.e. VLAN isn't routed) so this wouldn't allow vCenter to communicate. Does anyone have any suggestions, or other ideas for what might be causing the problem. I've read through the documentation, but it isn't giving me any pointers, and the error message isn't helping me beyond telling me something is wrong with my network config.

    Read the article

  • Redirect local, not internal, requests using SuSEfirewall2 or an iptables rule

    - by James
    I have a server that is running a web application deployed on Tomcat and is sitting in a test network. We're running SuSE 11 sp1 and have some redirection rules for incoming requests. For example we don't bind port 80 in Tomcat's server.xml file, instead we listen on port 9600 and have a configuration line in SuSEfirewall2 to redirect port 80 to 9640. This is because Tomcat doesn't run as root and can't open up port 80. My web application needs to be able to make requests to port 80 since that is the port it will be using when deployed. What rule can I add so that local requests get redirected by iptables? I tried looking at this question: How do I redirect one port to another on a local computer using iptables? but suggestions there didn't seem to help me. I tried running tcpdump on eth0 and then connecting to my local IP address (not 127.0.0.1, but the actual address) but I didn't see any activity. I did see activity if I connected from an external machine. Then I ran tcmpdump on lo, again tried to connect and this time I saw activity. So this leads me to believe that any requests made to my own IP address locally aren't getting handled by iptables. Just for reference he's what my NAT table looks like now: Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywhere tcp dpt:http redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:xfer redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:https redir ports 8443 Chain POSTROUTING (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

    Read the article

  • tap interfaces always disabled in linux bridge

    - by Dani Camps
    I have a physical interface eth0, and I want to create two virtual interfaces and bridge them with eth0. For this purpose I do: #Create the virtual interfaces tunctl -t tap0 tunctl -t tap1 ifconfig tap0 up ifconfig tap1 up #Create the bridge brctl addbr br0 brctl stp br0 off brctl addif br0 eth0 brctl addif br0 tap0 brctl addif br0 tap1 #Turning up the bridge ifconfig br0 up However my problem if that the tap interfaces always appear disabled in the bridge, and no traffic flows to them. $brctl show br0 bridge name bridge id STP enabled interfaces br0 8000.080027cabeba no eth2 tap0 tap1 $brctl showstp br0 br0 bridge id 8000.080027cabeba designated root 8000.080027cabeba root port 0 path cost 0 max age 20.00 bridge max age 20.00 hello time 2.00 bridge hello time 2.00 forward delay 15.00 bridge forward delay 15.00 ageing time 300.01 hello timer 0.00 tcn timer 0.00 topology change timer 0.00 gc timer 298.42 flags eth2 (1) port id 8001 state forwarding designated root 8000.080027cabeba path cost 4 designated bridge 8000.080027cabeba message age timer 0.00 designated port 8001 forward delay timer 12.97 designated cost 0 hold timer 1.24 flags tap0 (2) port id 8002 state disabled designated root 8000.080027cabeba path cost 100 designated bridge 8000.080027cabeba message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags tap1 (3) port id 8003 state disabled designated root 8000.080027cabeba path cost 100 designated bridge 8000.080027cabeba message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags Is there any way to set the tap interfaces in forwarding state? I do not understand why they are not because STP is disabled. Cheers Daniel

    Read the article

  • Cisco IOS BVI ACL: Only allow established UDP

    - by George Bailey
    Related: Cisco IOS ACL: Don't permit incoming connections just because they are from port 80 I know we can use the established keyword for TCP.. but what can we do for UDP (short of replacing a Bridge or BVI with a NAT)? Answer I found out what "UDP has no connection" means. DNS uses UDP for example.. named (DNS server) is lisenting on port 53 nslookup (DNS client) starts listening on some random port and sends a packet to port 53 of the server and notes the source port in that packet. nslookup will retry 3 times if necessary. Also the packets are so small that it does not have to worry about them coming in the wrong order. If nslookup receives a response on that port that comes from the servers IP and port then it stops listening. If the server tried to send two responses (for example a response and a response to the retry) then the server would not care if either of them made it because the client has the job to retry. In fact.. unless ICMP 3/3 packet gets through the server would not know about a failure. This is different from TCP where you get connection closed or timed out errors. DNS allows for an easy retry from the client as well as small packets.. so UDP is an excellent choice because it is more efficient. In UDP you would see nslookup sends request named sends answer In TCP you would see nslookup's machine sends SYN named's machine sends SYN-ACK nslookup's machine sends ACK and the request named's machine sends the response That is much more than is necessary for a tiny DNS packet

    Read the article

  • WWNs,WWPNs and Fibre Channel addresses

    - by user238230
    Lots of contradictory on these subjects and I don't know why. My first question is about the 64 bit WWN. One reference claims the terms WWN and WWPN are synonymous. An online source seems to refute this. They say: A WWPN (world wide port name) is the unique identifier for a fibre channel port where a WWN (world wide name) the unique identifier for the node itself. A good example is a dual port HBA. There will be two WWPN's (one for each port) and only a single WWN for the card itself. Question #1: Which is correct? I’m almost positive I read that every “Port” has a WWN. My next question is about the 24 bit FC address that is dynamically allocated to a port when it is introduced to the switch. The Domain ID field is defined as: "a unique number provided to each switch in the fabric." Question #2: Do Domain IDs only apply to switch ports? For example what would the Domain ID be for a HBA? None? The same as the switch port it is connected to? Question #3: My last question is about the Name Server of a switch. A book example shows the routing of a message through the switch. It uses the WWNs of the source and destination ports to route the message. I am assuming that the Name Server must associate the WWN and the FC address in some way in order to route the message, correct?

    Read the article

  • VLAN ACLs and when to go Layer 3

    - by wuckachucka
    I want to: a) segment several departments into VLANs with the hopes of restricting access between them completely (Sales never needs to talk to Support's workstations or printers and vice-versa) or b) certain IP addresses and TCP/UDP ports across VLANS -- i.e. permitting the Sales VLAN to access the CRM Web Server in the Server VLAN on port 443 only. Port-wise, I'll need a 48-port switch and another 24-port switch to go with the two existing 24-port Layer 2 switches (Linksys); I'm looking at going with D-Links or HP Procurves as Cisco is out of our price range. Question #1: From what I understand (and please correct me if I'm wrong), if the Servers (VLAN10) and Sales (VLAN20) are all on the same 48-port switch (or two stacked 24-port switches), afaik, the switch "knows" what VLANs and ports each device belongs to and will switch packets between them; I can also apply ACLs to restrict access between VLANs at this point. Is this correct? Question #2: Now lets say that Support (VLAN30) is on a different switch (one of the Linksys) switches. I'm assuming I'll need to trunk (tag) switch #2's VLANs across to switch #1, so switch #1 sees switch #2's VLAN30 (and vice-versa). Once Switch #1 can "see" VLAN30, I'm assuming I can then apply ACLs as stated in Question #1. Is this correct? Question #3: Once Switch #1 can see all the VLANs, can I achieve the seemingly "Layer 3" ACL filtering of restricting access to Server VLAN on only certain TCP/UDP ports and IP addresses (say, only permitting 3389 to the Terminal Server, 192.168.10.4/32). I say "seemingly" because some of the Layer 2 switches mention the ability to restrict ports and IP addresses through the ACLs; I (perhaps mistakenly) thought that in order to have Layer 3 ACLs (packet filtering), I'd need to have at least one Layer 3 switch acting as a core router. If my assumptions are incorrect, at which point do you need a Layer 3 switch for inter-VLAN routing vs. inter-VLAN switching? Is it generally only when you need that higher-level packet filtering ability between your departments?

    Read the article

  • getting base url of web site's root (absolute/relative url)

    - by uzay95
    I want to completely understand how to use relative and absolute url address in static and dynamic files. ~ : / : .. : in a relative URL indicates the parent directory . : refers to the current directory / : always replaces the entire pathname of the base URL // : always replaces everything from the hostname onwards This example is easy when you are working without virtual directory. But i am working on virtual directory. Relative URI Absolute URI about.html http://WebReference.com/html/about.html tutorial1/ http://WebReference.com/html/tutorial1/ tutorial1/2.html http://WebReference.com/html/tutorial1/2.html / http://WebReference.com/ //www.internet.com/ http://www.internet.com/ /experts/ http://WebReference.com/experts/ ../ http://WebReference.com/ ../experts/ http://WebReference.com/experts/ ../../../ http://WebReference.com/ ./ http://WebReference.com/html/ ./about.html http://WebReference.com/html/about.html I want to simulate a site below, like my project which is working on virtual directory. These are my aspx and ascx folder http://hostAddress:port/virtualDirectory/MainSite/ASPX/default.aspx http://hostAddress:port/virtualDirectory/MainSite/ASCX/UserCtrl/login.ascx http://hostAddress:port/virtualDirectory/AdminSite/ASPX/ASCX/default.aspx These are my JS Files(which will be use both with the aspx and ascx files): http://hostAddress:port/virtualDirectory/MainSite/JavascriptFolder/jsFile.js http://hostAddress:port/virtualDirectory/AdminSite/JavascriptFolder/jsFile.js this is my static web page address(I want to show some pictures and run inside some js functions): http://hostAddress:port/virtualDirectory/HTMLFiles/page.html this is my image folder http://hostAddress:port/virtualDirectory/Images/PNG/arrow.png http://hostAddress:port/virtualDirectory/Images/GIF/arrow.png if i want to write and image file's link in my ASPX file i should write aspxImgCtrl.ImageUrl = Server.MapPath("~")+"/Images/GIF/arrow.png"; But if i want to write the path hard coded or from javascript file, what kind of url address it should be?

    Read the article

  • PF, load balanced gateways, and Squid

    - by Santa
    Hi, So I have a FreeBSD router running PF and Squid, and it has three network interfaces: two connected to upstream providers (em0 and em1 respectively), and one for LAN (re0) that we serve. There is some load balancing configured with PF. Basically, it routes all traffic to ports 1-1024 through one interface (em0) and everything else through the other (em1). Now, I have a Squid proxy also running on the box that transparently redirects any HTTP request from LAN to port 3128 in 127.0.0.1. Since Squid redirects this request to HTTP outside, it should follow the load balancing rule through em0, no? The problem is, when we tested it out (by browsing from a computer in the LAN to http://whatismyip.com, it reports the external IP of the em1 interface! When we turn Squid off, the external IP of em0 is reported, as expected. How do I make Squid behave with the load balancing rule that we have set up? Here's the related settings in /etc/pf.conf that I have: ext_if1="em1" # DSL ext_if2="em0" # T1 int_if="re0" ext_gw1="x.x.x.1" ext_gw2="y.y.y.1" int_addr="10.0.0.1" int_net="10.0.0.0/16" dsl_ports = "1024:65535" t1_ports = "1:1023" ... squid=3128 rdr on $int_if inet proto tcp from $int_net \ to any port 80 -> 127.0.0.1 port $squid pass in quick on $int_if route-to lo0 inet proto tcp \ from $int_net to 127.0.0.1 port $squid keep state ... # load balancing pass in on $int_if route-to ($ext_if1 $ext_gw1) \ proto tcp from $int_net to any port $dsl_ports keep state pass in on $int_if route-to ($ext_if1 $ext_gw1) \ proto udp from $int_net to any port $dsl_ports pass in on $int_if route-to ($ext_if2 $ext_gw2) \ proto tcp from $int_net to any port $t1_ports keep state pass in on $int_if route-to ($ext_if2 $ext_gw2) \ proto udp from $int_net to any port $t1_ports Thanks!

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >