Search Results

Search found 7913 results on 317 pages for 'resource caching'.

Page 76/317 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• Load and Web Performance Testing using Visual Studio Ultimate 2010-Part 3

  - by Tarun Arora

  Welcome back once again, in Part 1 of Load and Web Performance Testing using Visual Studio 2010 I talked about why Performance Testing the application is important, the test tools available in Visual Studio Ultimate 2010 and various test rig topologies, in Part 2 of Load and Web Performance Testing using Visual Studio 2010 I discussed the details of web performance & load tests as well as why it’s important to follow a goal based pattern while performance testing your application. In part 3 I’ll be discussing Test Result Analysis, Test Result Drill through, Test Report Generation, Test Run Comparison, Asp.net Profiler and some closing thoughts. Test Results – I see some creepy worms! In Part 2 we put together a web performance test and a load test, lets run the test to see load test to see how the Web site responds to the load simulation. While the load test is running you will be able to see close to real time analysis in the Load Test Analyser window. You can use the Load Test Analyser to conduct load test analysis in three ways: Monitor a running load test - A condensed set of the performance counter data is maintained in memory. To prevent the results memory requirements from growing unbounded, up to 200 samples for each performance counter are maintained. This includes 100 evenly spaced samples that span the current elapsed time of the run and the most recent 100 samples.         After the load test run is completed - The test controller spools all collected performance counter data to a database while the test is running. Additional data, such as timing details and error details, is loaded into the database when the test completes. The performance data for a completed test is loaded from the database and analysed by the Load Test Analyser. Below you can see a screen shot of the summary view, this provides key results in a format that is compact and easy to read. You can also print the load test summary, this is generated after the test has completed or been stopped.         Analyse the load test results of a previously run load test – We’ll see this in the section where i discuss comparison between two test runs. The performance counters can be plotted on the graphs. You also have the option to highlight a selected part of the test and view details, drill down to the user activity chart where you can hover over to see more details of the test run.   Generate Report => Test Run Comparisons The level of reports you can generate using the Load Test Analyser is astonishing. You have the option to create excel reports and conduct side by side analysis of two test results or to track trend analysis. The tools also allows you to export the graph data either to MS Excel or to a CSV file. You can view the ASP.NET profiler report to conduct further analysis as well. View Data and Diagnostic Attachments opens the Choose Diagnostic Data Adapter Attachment dialog box to select an adapter to analyse the result type. For example, you can select an IntelliTrace adapter, click OK and open the IntelliTrace summary for the test agent that was used in the load test.   Compare results This creates a set of reports that compares the data from two load test results using tables and bar charts. I have taken these screen shots from the MSDN documentation, I would highly recommend exploring the wealth of knowledge available on MSDN. Leaving Thoughts While load testing the application with an excessive load for a longer duration of time, i managed to bring the IIS to its knees by piling up a huge queue of requests waiting to be processed. This clearly means that the IIS had run out of threads as all the threads were busy processing existing request, one easy way of fixing this is by increasing the default number of allocated threads, but this might escalate the problem. The better suggestion is to try and drill down to the actual root cause of the problem. When ever the garbage collection runs it stops processing any pages so all requests that come in during that period are queued up, but realistically the garbage collection completes in fraction of a a second. To understand this better lets look at the .net heap, it is divided into large heap and small heap, anything greater than 85kB in size will be allocated to the Large object heap, the Large object heap is non compacting and remember large objects are expensive to move around, so if you are allocating something in the large object heap, make sure that you really need it! The small object heap on the other hand is divided into generations, so all objects that are supposed to be short-lived are suppose to live in Gen-0 and the long living objects eventually move to Gen-2 as garbage collection goes through.  As you can see in the picture below all < 85 KB size objects are first assigned to Gen-0, when Gen-0 fills up and a new object comes in and finds Gen-0 full, the garbage collection process is started, the process checks for all the dead objects and assigns them as the valid candidate for deletion to free up memory and promotes all the remaining objects in Gen-0 to Gen-1. So in the future when ever you clean up Gen-1 you have to clean up Gen-0 as well. When you fill up Gen – 0 again, all of Gen – 1 dead objects are drenched and rest are moved to Gen-2 and Gen-0 objects are moved to Gen-1 to free up Gen-0, but by this time your Garbage collection process has started to take much more time than it usually takes. Now as I mentioned earlier when garbage collection is being run all page requests that come in during that period are queued up. Does this explain why possibly page requests are getting queued up, apart from this it could also be the case that you are waiting for a long running database process to complete.      Lets explore the heap a bit more… What is really a case of crisis is when the objects are living long enough to make it to Gen-2 and then dying, this is definitely a high cost operation. But sometimes you need objects in memory, for example when you cache data you hold on to the objects because you need to use them right across the user session, which is acceptable. But if you wanted to see what extreme caching can do to your server then write a simple application that chucks in a lot of data in cache, run a load test over it for about 10-15 minutes, forcing a lot of data in memory causing the heap to run out of memory. If you get to such a state where you start running out of memory the IIS as a mode of recovery restarts the worker process. It is great way to free up all your memory in the heap but this would clear the cache. The problem with this is if the customer had 10 items in their shopping basket and that data was stored in the application cache, the user basket will now be empty forcing them either to get frustrated and go to a competitor website or if the customer is really patient, give it another try! How can you address this, well two ways of addressing this; 1. Workaround – A x86 bit processor only allows a maximum of 4GB of RAM, this means the machine effectively has around 3.4 GB of RAM available, the OS needs about 1.5 GB of RAM to run efficiently, the IIS and .net framework also need their share of memory, leaving you a heap of around 800 MB to play with. Because Team builds by default build your application in ‘Compile as any mode’ it means the application is build such that it will run in x86 bit mode if run on a x86 bit processor and run in a x64 bit mode if run on a x64 but processor. The problem with this is not all applications are really x64 bit compatible specially if you are using com objects or external libraries. So, as a quick win if you compiled your application in x86 bit mode by changing the compile as any selection to compile as x86 in the team build, you will be able to run your application on a x64 bit machine in x86 bit mode (WOW – By running Windows on Windows) and what that means is, you could use 8GB+ worth of RAM, if you take away everything else your application will roughly get a heap size of at least 4 GB to play with, which is immense. If you need a heap size of more than 4 GB you have either build a software for NASA or there is something fundamentally wrong in your application. 2. Solution – Now that you have put a workaround in place the IIS will not restart the worker process that regularly, which means you can take a breather and start working to get to the root cause of this memory leak. But this begs a question “How do I Identify possible memory leaks in my application?” Well i won’t say that there is one single tool that can tell you where the memory leak is, but trust me, ‘Performance Profiling’ is a great start point, it definitely gets you started in the right direction, let’s have a look at how. Performance Wizard - Start the Performance Wizard and select Instrumentation, this lets you measure function call counts and timings. Before running the performance session right click the performance session settings and chose properties from the context menu to bring up the Performance session properties page and as shown in the screen shot below, check the check boxes in the group ‘.NET memory profiling collection’ namely ‘Collect .NET object allocation information’ and ‘Also collect the .NET Object lifetime information’.    Now if you fire off the profiling session on your pages you will notice that the results allows you to view ‘Object Lifetime’ which shows you the number of objects that made it to Gen-0, Gen-1, Gen-2, Large heap, etc. Another great feature about the profile is that if your application has > 5% cases where objects die right after making to the Gen-2 storage a threshold alert is generated to alert you. Since you have the option to also view the most expensive methods and by capturing the IntelliTrace data you can drill in to narrow down to the line of code that is the root cause of the problem. Well now that we have seen how crucial memory management is and how easy Visual Studio Ultimate 2010 makes it for us to identify and reproduce the problem with the best of breed tools in the product. Caching One of the main ways to improve performance is Caching. Which basically means you tell the web server that instead of going to the database for each request you keep the data in the webserver and when the user asks for it you serve it from the webserver itself. BUT that can have consequences! Let’s look at some code, trust me caching code is not very intuitive, I define a cache key for almost all searches made through the common search page and cache the results. The approach works fine, first time i get the data from the database and second time data is served from the cache, significant performance improvement, EXCEPT when two users try to do the same operation and run into each other. But it is easy to handle this by adding the lock as you can see in the snippet below. So, as long as a user comes in and finds that the cache is empty, the user locks and starts to get the cache no more concurrency issues. But lets say you are processing 10 requests per second, by the time i have locked the operation to get the results from the database, 9 other users came in and found that the cache key is null so after i have come out and populated the cache they will still go in to get the results again. The application will still be faster because the next set of 10 users and so on would continue to get data from the cache. BUT if we added another null check after locking to build the cache and before actual call to the db then the 9 users who follow me would not make the extra trip to the database at all and that would really increase the performance, but didn’t i say that the code won’t be very intuitive, may be you should leave a comment you don’t want another developer to come in and think what a fresher why is he checking for the cache key null twice !!! The downside of caching is, you are storing the data outside of the database and the data could be wrong because the updates applied to the database would make the data cached at the web server out of sync. So, how do you invalidate the cache? Well if you only had one way of updating the data lets say only one entry point to the data update you can write some logic to say that every time new data is entered set the cache object to null. But this approach will not work as soon as you have several ways of feeding data to the system or your system is scaled out across a farm of web servers. The perfect solution to this is Micro Caching which means you cache the query for a set time duration and invalidate the cache after that set duration. The advantage is every time the user queries for that data with in the time span for which you have cached the results there are no calls made to the database and the data is served right from the server which makes the response immensely quick. Now figuring out the appropriate time span for which you micro cache the query results really depends on the application. Lets say your website gets 10 requests per second, if you retain the cache results for even 1 minute you will have immense performance gains. You would reduce 90% hits to the database for searching. Ever wondered why when you go to e-bookers.com or xpedia.com or yatra.com to book a flight and you click on the book button because the fare seems too exciting and you get an error message telling you that the fare is not valid any more. Yes, exactly => That is a cache failure! These travel sites or price compare engines are not going to hit the database every time you hit the compare button instead the results will be served from the cache, because the query results are micro cached, its a perfect trade-off, by micro caching the results the site gains 100% performance benefits but every once in a while annoys a customer because the fare has expired. But the trade off works in the favour of these sites as they are still able to process up to 30+ page requests per second which means cater to the site traffic by may be losing 1 customer every once in a while to a competitor who is also using a similar caching technique what are the odds that the user will not come back to their site sooner or later? Recap   Resources Below are some Key resource you might like to review. I would highly recommend the documentation, walkthroughs and videos available on MSDN. You can always make use of Fiddler to debug Web Performance Tests. Some community test extensions and plug ins available on Codeplex might also be of interest to you. The Road Ahead Thank you for taking the time out and reading this blog post, you may also want to read Part I and Part II if you haven’t so far. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Questions/Feedback/Suggestions, etc please leave a comment. Next ‘Load Testing in the cloud’, I’ll be working on exploring the possibilities of running Test controller/Agents in the Cloud. See you on the other side! Thank You!   Share this post : CodeProject

  Read the article

• Security Controls on data for P6 Analytics

  - by Jeffrey McDaniel

  The Star database and P6 Analytics calculates security based on P6 security using OBS, global, project, cost, and resource security considerations. If there is some concern that users are not seeing expected data in P6 Analytics here are some areas to review: 1. Determining if a user has cost security is based on the Project level security privileges - either View Project Costs/Financials or Edit EPS Financials. If expecting to see costs make sure one of these permissions are allocated.  2. User must have OBS access on a Project. Not WBS level. WBS level security is not supported. Make sure user has OBS on project level.  3. Resource Access is determined by what is granted in P6. Verify the resource access granted to this user in P6. Resource security is hierarchical. Project access will override Resource access based on the way security policies are applied. 4. Module access must be given to a P6 user for that user to come over into Star/P6 Analytics. For earlier version of RDB there was a report_user_flag on the Users table. This flag field is no longer used after P6 Reporting Database 2.1. 5. For P6 Reporting Database versions 2.2 and higher, the Extended Schema Security service must be run to calculate all security. Any changes to privileges or security this service must be rerun before any ETL. 6. In P6 Analytics 2.0 or higher, a Weblogic user must exist that matches the P6 username. For example user Tim must exist in P6 and Weblogic users for Tim to be able to log into P6 Analytics and access data based on  P6 security.  In earlier versions the username needed to exist in RPD. 7. Cache in OBI is another area that can sometimes make it seem a user isn't seeing the data they expect. While cache can be beneficial for performance in OBI. If the data is outdated it can retrieve older, stale data. Clearing or turning off cache when rerunning a query can determine if the returned result set was from cache or from the database.

  Read the article

• Loosely coupled .NET Cache Provider using Dependency Injection

  - by Rhames

  I have recently been reading the excellent book “Dependency Injection in .NET”, written by Mark Seemann. I do not generally buy software development related books, as I never seem to have the time to read them, but I have found the time to read Mark’s book, and it was time well spent I think. Reading the ideas around Dependency Injection made me realise that the Cache Provider code I wrote about earlier (see http://geekswithblogs.net/Rhames/archive/2011/01/10/using-the-asp.net-cache-to-cache-data-in-a-model.aspx) could be refactored to use Dependency Injection, which should produce cleaner code. The goals are to: Separate the cache provider implementation (using the ASP.NET data cache) from the consumers (loose coupling). This will also mean that the dependency on System.Web for the cache provider does not ripple down into the layers where it is being consumed (such as the domain layer). Provide a decorator pattern to allow a consumer of the cache provider to be implemented separately from the base consumer (i.e. if we have a base repository, we can decorate this with a caching version). Although I used the term repository, in reality the cache consumer could be just about anything. Use constructor injection to provide the Dependency Injection, with a suitable DI container (I use Castle Windsor). The sample code for this post is available on github, https://github.com/RobinHames/CacheProvider.git ICacheProvider In the sample code, the key interface is ICacheProvider, which is in the domain layer. 1: using System; 2: using System.Collections.Generic; 3:   4: namespace CacheDiSample.Domain 5: { 6: public interface ICacheProvider<T> 7: { 8: T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); 9: IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); 10: } 11: }   This interface contains two methods to retrieve data from the cache, either as a single instance or as an IEnumerable. the second paramerter is of type Func<T>. This is the method used to retrieve data if nothing is found in the cache. The ASP.NET implementation of the ICacheProvider interface needs to live in a project that has a reference to system.web, typically this will be the root UI project, or it could be a separate project. The key thing is that the domain or data access layers do not need system.web references adding to them. In my sample MVC application, the CacheProvider is implemented in the UI project, in a folder called “CacheProviders”: 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Caching; 6: using CacheDiSample.Domain; 7:   8: namespace CacheDiSample.CacheProvider 9: { 10: public class CacheProvider<T> : ICacheProvider<T> 11: { 12: public T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 13: { 14: return FetchAndCache<T>(key, retrieveData, absoluteExpiry, relativeExpiry); 15: } 16:   17: public IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 18: { 19: return FetchAndCache<IEnumerable<T>>(key, retrieveData, absoluteExpiry, relativeExpiry); 20: } 21:   22: #region Helper Methods 23:   24: private U FetchAndCache<U>(string key, Func<U> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 25: { 26: U value; 27: if (!TryGetValue<U>(key, out value)) 28: { 29: value = retrieveData(); 30: if (!absoluteExpiry.HasValue) 31: absoluteExpiry = Cache.NoAbsoluteExpiration; 32:   33: if (!relativeExpiry.HasValue) 34: relativeExpiry = Cache.NoSlidingExpiration; 35:   36: HttpContext.Current.Cache.Insert(key, value, null, absoluteExpiry.Value, relativeExpiry.Value); 37: } 38: return value; 39: } 40:   41: private bool TryGetValue<U>(string key, out U value) 42: { 43: object cachedValue = HttpContext.Current.Cache.Get(key); 44: if (cachedValue == null) 45: { 46: value = default(U); 47: return false; 48: } 49: else 50: { 51: try 52: { 53: value = (U)cachedValue; 54: return true; 55: } 56: catch 57: { 58: value = default(U); 59: return false; 60: } 61: } 62: } 63:   64: #endregion 65:   66: } 67: }   The FetchAndCache helper method checks if the specified cache key exists, if it does not, the Func<U> retrieveData method is called, and the results are added to the cache. Using Castle Windsor to register the cache provider In the MVC UI project (my application root), Castle Windsor is used to register the CacheProvider implementation, using a Windsor Installer: 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4:   5: using CacheDiSample.Domain; 6: using CacheDiSample.CacheProvider; 7:   8: namespace CacheDiSample.WindsorInstallers 9: { 10: public class CacheInstaller : IWindsorInstaller 11: { 12: public void Install(IWindsorContainer container, IConfigurationStore store) 13: { 14: container.Register( 15: Component.For(typeof(ICacheProvider<>)) 16: .ImplementedBy(typeof(CacheProvider<>)) 17: .LifestyleTransient()); 18: } 19: } 20: }   Note that the cache provider is registered as a open generic type. Consuming a Repository I have an existing couple of repository interfaces defined in my domain layer: IRepository.cs 1: using System; 2: using System.Collections.Generic; 3:   4: using CacheDiSample.Domain.Model; 5:   6: namespace CacheDiSample.Domain.Repositories 7: { 8: public interface IRepository<T> 9: where T : EntityBase 10: { 11: T GetById(int id); 12: IList<T> GetAll(); 13: } 14: }   IBlogRepository.cs 1: using System; 2: using CacheDiSample.Domain.Model; 3:   4: namespace CacheDiSample.Domain.Repositories 5: { 6: public interface IBlogRepository : IRepository<Blog> 7: { 8: Blog GetByName(string name); 9: } 10: }   These two repositories are implemented in the DataAccess layer, using Entity Framework to retrieve data (this is not important though). One important point is that in the BaseRepository implementation of IRepository, the methods are virtual. This will allow the decorator to override them. The BlogRepository is registered in a RepositoriesInstaller, again in the MVC UI project. 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4:   5: using CacheDiSample.Domain.CacheDecorators; 6: using CacheDiSample.Domain.Repositories; 7: using CacheDiSample.DataAccess; 8:   9: namespace CacheDiSample.WindsorInstallers 10: { 11: public class RepositoriesInstaller : IWindsorInstaller 12: { 13: public void Install(IWindsorContainer container, IConfigurationStore store) 14: { 15: container.Register(Component.For<IBlogRepository>() 16: .ImplementedBy<BlogRepository>() 17: .LifestyleTransient() 18: .DependsOn(new 19: { 20: nameOrConnectionString = "BloggingContext" 21: })); 22: } 23: } 24: }   Now I can inject a dependency on the IBlogRepository into a consumer, such as a controller in my sample code: 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6:   7: using CacheDiSample.Domain.Repositories; 8: using CacheDiSample.Domain.Model; 9:   10: namespace CacheDiSample.Controllers 11: { 12: public class HomeController : Controller 13: { 14: private readonly IBlogRepository blogRepository; 15:   16: public HomeController(IBlogRepository blogRepository) 17: { 18: if (blogRepository == null) 19: throw new ArgumentNullException("blogRepository"); 20:   21: this.blogRepository = blogRepository; 22: } 23:   24: public ActionResult Index() 25: { 26: ViewBag.Message = "Welcome to ASP.NET MVC!"; 27:   28: var blogs = blogRepository.GetAll(); 29:   30: return View(new Models.HomeModel { Blogs = blogs }); 31: } 32:   33: public ActionResult About() 34: { 35: return View(); 36: } 37: } 38: }   Consuming the Cache Provider via a Decorator I used a Decorator pattern to consume the cache provider, this means my repositories follow the open/closed principle, as they do not require any modifications to implement the caching. It also means that my controllers do not have any knowledge of the caching taking place, as the DI container will simply inject the decorator instead of the root implementation of the repository. The first step is to implement a BlogRepository decorator, with the caching logic in it. Note that this can reside in the domain layer, as it does not require any knowledge of the data access methods. BlogRepositoryWithCaching.cs 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Text; 5:   6: using CacheDiSample.Domain.Model; 7: using CacheDiSample.Domain; 8: using CacheDiSample.Domain.Repositories; 9:   10: namespace CacheDiSample.Domain.CacheDecorators 11: { 12: public class BlogRepositoryWithCaching : IBlogRepository 13: { 14: // The generic cache provider, injected by DI 15: private ICacheProvider<Blog> cacheProvider; 16: // The decorated blog repository, injected by DI 17: private IBlogRepository parentBlogRepository; 18:   19: public BlogRepositoryWithCaching(IBlogRepository parentBlogRepository, ICacheProvider<Blog> cacheProvider) 20: { 21: if (parentBlogRepository == null) 22: throw new ArgumentNullException("parentBlogRepository"); 23:   24: this.parentBlogRepository = parentBlogRepository; 25:   26: if (cacheProvider == null) 27: throw new ArgumentNullException("cacheProvider"); 28:   29: this.cacheProvider = cacheProvider; 30: } 31:   32: public Blog GetByName(string name) 33: { 34: string key = string.Format("CacheDiSample.DataAccess.GetByName.{0}", name); 35: // hard code 5 minute expiry! 36: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 37: return cacheProvider.Fetch(key, () => 38: { 39: return parentBlogRepository.GetByName(name); 40: }, 41: null, relativeCacheExpiry); 42: } 43:   44: public Blog GetById(int id) 45: { 46: string key = string.Format("CacheDiSample.DataAccess.GetById.{0}", id); 47:   48: // hard code 5 minute expiry! 49: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 50: return cacheProvider.Fetch(key, () => 51: { 52: return parentBlogRepository.GetById(id); 53: }, 54: null, relativeCacheExpiry); 55: } 56:   57: public IList<Blog> GetAll() 58: { 59: string key = string.Format("CacheDiSample.DataAccess.GetAll"); 60:   61: // hard code 5 minute expiry! 62: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 63: return cacheProvider.Fetch(key, () => 64: { 65: return parentBlogRepository.GetAll(); 66: }, 67: null, relativeCacheExpiry) 68: .ToList(); 69: } 70: } 71: }   The key things in this caching repository are: I inject into the repository the ICacheProvider<Blog> implementation, via the constructor. This will make the cache provider functionality available to the repository. I inject the parent IBlogRepository implementation (which has the actual data access code), via the constructor. This will allow the methods implemented in the parent to be called if nothing is found in the cache. I override each of the methods implemented in the repository, including those implemented in the generic BaseRepository. Each override of these methods follows the same pattern. It makes a call to the CacheProvider.Fetch method, and passes in the parentBlogRepository implementation of the method as the retrieval method, to be used if nothing is present in the cache. Configuring the Caching Repository in the DI Container The final piece of the jigsaw is to tell Castle Windsor to use the BlogRepositoryWithCaching implementation of IBlogRepository, but to inject the actual Data Access implementation into this decorator. This is easily achieved by modifying the RepositoriesInstaller to use Windsor’s implicit decorator wiring: 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4:   5: using CacheDiSample.Domain.CacheDecorators; 6: using CacheDiSample.Domain.Repositories; 7: using CacheDiSample.DataAccess; 8:   9: namespace CacheDiSample.WindsorInstallers 10: { 11: public class RepositoriesInstaller : IWindsorInstaller 12: { 13: public void Install(IWindsorContainer container, IConfigurationStore store) 14: { 15:   16: // Use Castle Windsor implicit wiring for the block repository decorator 17: // Register the outermost decorator first 18: container.Register(Component.For<IBlogRepository>() 19: .ImplementedBy<BlogRepositoryWithCaching>() 20: .LifestyleTransient()); 21: // Next register the IBlogRepository inmplementation to inject into the outer decorator 22: container.Register(Component.For<IBlogRepository>() 23: .ImplementedBy<BlogRepository>() 24: .LifestyleTransient() 25: .DependsOn(new 26: { 27: nameOrConnectionString = "BloggingContext" 28: })); 29: } 30: } 31: }   This is all that is needed. Now if the consumer of the repository makes a call to the repositories method, it will be routed via the caching mechanism. You can test this by stepping through the code, and seeing that the DataAccess.BlogRepository code is only called if there is no data in the cache, or this has expired. The next step is to add the SQL Cache Dependency support into this pattern, this will be a future post.

  Read the article

• Loading jQuery Consistently in a .NET Web App

  - by Rick Strahl

  One thing that frequently comes up in discussions when using jQuery is how to best load the jQuery library (as well as other commonly used and updated libraries) in a Web application. Specifically the issue is the one of versioning and making sure that you can easily update and switch versions of script files with application wide settings in one place and having your script usage reflect those settings in the entire application on all pages that use the script. Although I use jQuery as an example here, the same concepts can be applied to any script library - for example in my Web libraries I use the same approach for jQuery.ui and my own internal jQuery support library. The concepts used here can be applied both in WebForms and MVC. Loading jQuery Properly From CDN Before we look at a generic way to load jQuery via some server logic, let me first point out my preferred way to embed jQuery into the page. I use the Google CDN to load jQuery and then use a fallback URL to handle the offline or no Internet connection scenario. Why use a CDN? CDN links tend to be loaded more quickly since they are very likely to be cached in user's browsers already as jQuery CDN is used by many, many sites on the Web. Using a CDN also removes load from your Web server and puts the load bearing on the CDN provider - in this case Google - rather than on your Web site. On the downside, CDN links gives the provider (Google, Microsoft) yet another way to track users through their Web usage. Here's how I use jQuery CDN plus a fallback link on my WebLog for example: <!DOCTYPE HTML> <html> <head> <script src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script> <script> if (typeof (jQuery) == 'undefined') document.write(unescape("%3Cscript " + "src='/Weblog/wwSC.axd?r=Westwind.Web.Controls.Resources.jquery.js' %3E%3C/script%3E")); </script> <title>Rick Strahl's Web Log</title> ... </head>   You can see that the CDN is referenced first, followed by a small script block that checks to see whether jQuery was loaded (jQuery object exists). If it didn't load another script reference is added to the document dynamically pointing to a backup URL. In this case my backup URL points at a WebResource in my Westwind.Web  assembly, but the URL can also be local script like src="/scripts/jquery.min.js". Important: Use the proper Protocol/Scheme for  for CDN Urls [updated based on comments] If you're using a CDN to load an external script resource you should always make sure that the script is loaded with the same protocol as the parent page to avoid mixed content warnings by the browser. You don't want to load a script link to an http:// resource when you're on an https:// page. The easiest way to use this is by using a protocol relative URL: <script src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script> which is an easy way to load resources from other domains. This URL syntax will automatically use the parent page's protocol (or more correctly scheme). As long as the remote domains support both http:// and https:// access this should work. BTW this also works in CSS (with some limitations) and links. BTW, I didn't know about this until it was pointed out in the comments. This is a very useful feature for many things - ah the benefits of my blog to myself :-) Version Numbers When you use a CDN you notice that you have to reference a specific version of jQuery. When using local files you may not have to do this as you can rename your private copy of jQuery.js, but for CDN the references are always versioned. The version number is of course very important to ensure you getting the version you have tested with, but it's also important to the provider because it ensures that cached content is always correct. If an existing file was updated the updates might take a very long time to get past the locally cached content and won't refresh properly. The version number ensures you get the right version and not some cached content that has been changed but not updated in your cache. On the other hand version numbers also mean that once you decide to use a new version of the script you now have to change all your script references in your pages. Depending on whether you use some sort of master/layout page or not this may or may not be easy in your application. Even if you do use master/layout pages, chances are that you probably have a few of them and at the very least all of those have to be updated for the scripts. If you use individual pages for all content this issue then spreads to all of your pages. Search and Replace in Files will do the trick, but it's still something that's easy to forget and worry about. Personaly I think it makes sense to have a single place where you can specify common script libraries that you want to load and more importantly which versions thereof and where they are loaded from. Loading Scripts via Server Code Script loading has always been important to me and as long as I can remember I've always built some custom script loading routines into my Web frameworks. WebForms makes this fairly easy because it has a reasonably useful script manager (ClientScriptManager and the ScriptManager) which allow injecting script into the page easily from anywhere in the Page cycle. What's nice about these components is that they allow scripts to be injected by controls so components can wrap up complex script/resource dependencies more easily without having to require long lists of CSS/Scripts/Image includes. In MVC or pure script driven applications like Razor WebPages  the process is more raw, requiring you to embed script references in the right place. But its also more immediate - it lets you know exactly which versions of scripts to use because you have to manually embed them. In WebForms with different controls loading resources this often can get confusing because it's quite possible to load multiple versions of the same script library into a page, the results of which are less than optimal… In this post I look a simple routine that embeds jQuery into the page based on a few application wide configuration settings. It returns only a string of the script tags that can be manually embedded into a Page template. It's a small function that merely a string of the script tags shown at the begging of this post along with some options on how that string is comprised. You'll be able to specify in one place which version loads and then all places where the help function is used will automatically reflect this selection. Options allow specification of the jQuery CDN Url, the fallback Url and where jQuery should be loaded from (script folder, Resource or CDN in my case). While this is specific to jQuery you can apply this to other resources as well. For example I use a similar approach with jQuery.ui as well using practically the same semantics. Providing Resources in ControlResources In my Westwind.Web Web utility library I have a class called ControlResources which is responsible for holding resource Urls, resource IDs and string contants that reference those resource IDs. The library also provides a few helper methods for loading common scriptscripts into a Web page. There are specific versions for WebForms which use the ClientScriptManager/ScriptManager and script link methods that can be used in any .NET technology that can embed an expression into the output template (or code for that matter). The ControlResources class contains mostly static content - references to resources mostly. But it also contains a few static properties that configure script loading: A Script LoadMode (CDN, Resource, or script url) A default CDN Url A fallback url They are  static properties in the ControlResources class: public class ControlResources { /// <summary> /// Determines what location jQuery is loaded from /// </summary> public static JQueryLoadModes jQueryLoadMode = JQueryLoadModes.ContentDeliveryNetwork; /// <summary> /// jQuery CDN Url on Google /// </summary> public static string jQueryCdnUrl = "//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"; /// <summary> /// jQuery CDN Url on Google /// </summary> public static string jQueryUiCdnUrl = "//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/jquery-ui.min.js"; /// <summary> /// jQuery UI fallback Url if CDN is unavailable or WebResource is used /// Note: The file needs to exist and hold the minimized version of jQuery ui /// </summary> public static string jQueryUiLocalFallbackUrl = "~/scripts/jquery-ui.min.js"; } These static properties are fixed values that can be changed at application startup to reflect your preferences. Since they're static they are application wide settings and respected across the entire Web application running. It's best to set these default in Application_Init or similar startup code if you need to change them for your application: protected void Application_Start(object sender, EventArgs e) { // Force jQuery to be loaded off Google Content Network ControlResources.jQueryLoadMode = JQueryLoadModes.ContentDeliveryNetwork; // Allow overriding of the Cdn url ControlResources.jQueryCdnUrl = "http://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js"; // Route to our own internal handler App.OnApplicationStart(); } With these basic settings in place you can then embed expressions into a page easily. In WebForms use: <!DOCTYPE html> <html> <head runat="server"> <%= ControlResources.jQueryLink() %> <script src="scripts/ww.jquery.min.js"></script> </head> In Razor use: <!DOCTYPE html> <html> <head> @Html.Raw(ControlResources.jQueryLink()) <script src="scripts/ww.jquery.min.js"></script> </head> Note that in Razor you need to use @Html.Raw() to force the string NOT to escape. Razor by default escapes string results and this ensures that the HTML content is properly expanded as raw HTML text. Both the WebForms and Razor output produce: <!DOCTYPE html> <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js" type="text/javascript"></script> <script type="text/javascript"> if (typeof (jQuery) == 'undefined') document.write(unescape("%3Cscript src='/WestWindWebToolkitWeb/WebResource.axd?d=-b6oWzgbpGb8uTaHDrCMv59VSmGhilZP5_T_B8anpGx7X-PmW_1eu1KoHDvox-XHqA1EEb-Tl2YAP3bBeebGN65tv-7-yAimtG4ZnoWH633pExpJor8Qp1aKbk-KQWSoNfRC7rQJHXVP4tC0reYzVw2&t=634535391996872492' type='text/javascript'%3E%3C/script%3E"));</script> <script src="scripts/ww.jquery.min.js"></script> </head> which produces the desired effect for both CDN load and fallback URL. The implementation of jQueryLink is pretty basic of course: /// <summary> /// Inserts a script link to load jQuery into the page based on the jQueryLoadModes settings /// of this class. Default load is by CDN plus WebResource fallback /// </summary> /// <param name="url"> /// An optional explicit URL to load jQuery from. Url is resolved. /// When specified no fallback is applied /// </param> /// <returns>full script tag and fallback script for jQuery to load</returns> public static string jQueryLink(JQueryLoadModes jQueryLoadMode = JQueryLoadModes.Default, string url = null) { string jQueryUrl = string.Empty; string fallbackScript = string.Empty; if (jQueryLoadMode == JQueryLoadModes.Default) jQueryLoadMode = ControlResources.jQueryLoadMode; if (!string.IsNullOrEmpty(url)) jQueryUrl = WebUtils.ResolveUrl(url); else if (jQueryLoadMode == JQueryLoadModes.WebResource) { Page page = new Page(); jQueryUrl = page.ClientScript.GetWebResourceUrl(typeof(ControlResources), ControlResources.JQUERY_SCRIPT_RESOURCE); } else if (jQueryLoadMode == JQueryLoadModes.ContentDeliveryNetwork) { jQueryUrl = ControlResources.jQueryCdnUrl; if (!string.IsNullOrEmpty(jQueryCdnUrl)) { // check if jquery loaded - if it didn't we're not online and use WebResource fallbackScript = @"<script type=""text/javascript"">if (typeof(jQuery) == 'undefined') document.write(unescape(""%3Cscript src='{0}' type='text/javascript'%3E%3C/script%3E""));</script>"; fallbackScript = string.Format(fallbackScript, WebUtils.ResolveUrl(ControlResources.jQueryCdnFallbackUrl)); } } string output = "<script src=\"" + jQueryUrl + "\" type=\"text/javascript\"></script>"; // add in the CDN fallback script code if (!string.IsNullOrEmpty(fallbackScript)) output += "\r\n" + fallbackScript + "\r\n"; return output; } There's one dependency here on WebUtils.ResolveUrl() which resolves Urls without access to a Page/Control (another one of those features that should be in the runtime, not in the WebForms or MVC engine). You can see there's only a little bit of logic in this code that deals with potentially different load modes. I can load scripts from a Url, WebResources or - my preferred way - from CDN. Based on the static settings the scripts to embed are composed to be returned as simple string <script> tag(s). I find this extremely useful especially when I'm not connected to the internet so that I can quickly swap in a local jQuery resource instead of loading from CDN. While CDN loading with the fallback works it can be a bit slow as the CDN is probed first before the fallback kicks in. Switching quickly in one place makes this trivial. It also makes it very easy once a new version of jQuery rolls around to move up to the new version and ensure that all pages are using the new version immediately. I'm not trying to make this out as 'the' definite way to load your resources, but rather provide it here as a pointer so you can maybe apply your own logic to determine where scripts come from and how they load. You could even automate this some more by using configuration settings or reading the locations/preferences out of some sort of data/metadata store that can be dynamically updated instead via recompilation. FWIW, I use a very similar approach for loading jQuery UI and my own ww.jquery library - the same concept can be applied to any kind of script you might be loading from different locations. Hopefully some of you find this a useful addition to your toolset. Resources Google CDN for jQuery Full ControlResources Source Code ControlResource Documentation Westwind.Web NuGet This method is part of the Westwind.Web library of the West Wind Web Toolkit or you can grab the Web library from NuGet and add to your Visual Studio project. This package includes a host of Web related utilities and script support features. © Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  jQuery   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Weblogic Bea 10.0 M1 and WorkManager

  - by ma-ver-ick

  Hi there! I have to execute long running threads in a WebLogic Bea 10.0 M1 server environment. I tried to use WorkManagers for this. Using an own WorkManager allows me to specify my own thread timeout (MaxThreadStuckTime) instead of adjusting the timeout for the whole business application. My setup is as follows: weblogic-ejb-jar.xml: <?xml version="1.0" encoding="UTF-8"?> <weblogic-ejb-jar xmlns="http://www.bea.com/ns/weblogic/90" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-ejb-jar.xsd"> <weblogic-enterprise-bean> <ejb-name>TestBean</ejb-name> <resource-description> <res-ref-name>myWorkManager</res-ref-name> <jndi-name>wm/myWorkManager</jndi-name> </resource-description> </weblogic-enterprise-bean> </weblogic-ejb-jar> weblogic-application.xml: <?xml version="1.0" encoding="UTF-8"?> <weblogic xmlns="http://www.bea.com/ns/weblogic/90" xmlns:j2ee="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic.xsd"> <work-manager> <name>myWorkManager</name> <ignore-stuck-threads>1</ignore-stuck-threads> </work-manager> </weblogic> and the Bean: import javax.annotation.Resource; import javax.ejb.Stateful; import weblogic.work.WorkManager; @Stateful(mappedName = "TestBean") public class TestBean implements TestBeanRemote { @Resource(name = "myWorkManager") private WorkManager myWorkManager; public void test() { myWorkManager.schedule(new Runnable() { public void run() { while (true) { System.out.println("test: +++++++++++++++++++++++++"); try { Thread.sleep(45000); } catch (InterruptedException e) { e.printStackTrace(); } } } }); } } When I try to deploy this things, the server gives me the following exceptions: [EJB:011026]The EJB container failed while creating the java:/comp/env namespace for this EJB deployment. weblogic.deployment.EnvironmentException: [EJB:010176]The resource-env-ref 'myWorkManager' declared in the ejb-jar.xml descriptor has no JNDI name mapped to it. The resource-ref must be mapped to a JNDI name using the resource-description element of the weblogic-ejb-jar.xml descriptor. I try to figure out how to access / use WorkMangers for days now, and still get this or that as an exception. Very frustrating! Thanks in advance!

  Read the article

• Wireless card power management

  - by penner

  I have noticed that when my computer in plugged in, the wireless strength increases. I'm assuming this is to do with power management. Is there a way to disable Wireless Power Management? I have found a few blog posts that show hacks to disable this but what is best practice here? Should there not be an option via the power menu that lets you toggle this? EDIT -- FILES AND LOGS AS REQUESTED /var/log/kern.log Jul 11 11:45:27 CoolBreeze kernel: [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532080] [fglrx] Gart USWC size:1280 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532084] [fglrx] Gart cacheable size:508 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 Jul 11 11:45:38 CoolBreeze kernel: [ 17.423743] eth1: no IPv6 routers present Jul 11 11:46:37 CoolBreeze kernel: [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) Jul 11 11:46:37 CoolBreeze kernel: [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 Jul 11 11:54:25 CoolBreeze kernel: [ 543.679614] eth1: no IPv6 routers present dmesg [ 1.411959] ACPI: Power Button [PWRB] [ 1.412046] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.412054] ACPI: Sleep Button [SLPB] [ 1.412150] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.412765] ACPI: Lid Switch [LID0] [ 1.412866] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.412874] ACPI: Power Button [PWRF] [ 1.412996] ACPI: Fan [FAN0] (off) [ 1.413068] ACPI: Fan [FAN1] (off) [ 1.419493] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.419498] ACPI: Thermal Zone [TZ00] (27 C) [ 1.421913] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.421918] ACPI: Thermal Zone [TZ01] (61 C) [ 1.421971] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.421986] ACPI: Battery Slot [BAT0] (battery present) [ 1.422062] ERST: Table is not found! [ 1.422067] GHES: HEST is not enabled! [ 1.422158] isapnp: Scanning for PnP cards... [ 1.422242] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.434620] ACPI: Battery Slot [BAT0] (battery present) [ 1.736355] Freeing initrd memory: 14352k freed [ 1.777846] isapnp: No Plug & Play device found [ 1.963650] Linux agpgart interface v0.103 [ 1.967148] brd: module loaded [ 1.968866] loop: module loaded [ 1.969134] ahci 0000:00:1f.2: version 3.0 [ 1.969154] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.969226] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.969277] ahci: SSS flag set, parallel bus scan disabled [ 1.969320] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode [ 1.969329] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.969338] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.983340] scsi0 : ahci [ 1.983515] scsi1 : ahci [ 1.983670] scsi2 : ahci [ 1.983829] scsi3 : ahci [ 1.983985] scsi4 : ahci [ 1.984145] scsi5 : ahci [ 1.984270] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45 [ 1.984277] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45 [ 1.984282] ata3: DUMMY [ 1.984285] ata4: DUMMY [ 1.984288] ata5: DUMMY [ 1.984292] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45 [ 1.985150] Fixed MDIO Bus: probed [ 1.985192] tun: Universal TUN/TAP device driver, 1.6 [ 1.985196] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.985285] PPP generic driver version 2.4.2 [ 1.985472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.985507] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.985534] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.985541] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.985626] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.985666] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.989663] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.989690] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800 [ 2.002183] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.002447] hub 1-0:1.0: USB hub found [ 2.002455] hub 1-0:1.0: 3 ports detected [ 2.002607] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.002633] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.002639] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 2.002737] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.002775] ehci_hcd 0000:00:1d.0: debug port 2 [ 2.006780] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 2.006806] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00 [ 2.022161] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.022401] hub 2-0:1.0: USB hub found [ 2.022409] hub 2-0:1.0: 3 ports detected [ 2.022567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.022599] uhci_hcd: USB Universal Host Controller Interface driver [ 2.022720] usbcore: registered new interface driver libusual [ 2.022813] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.035831] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.035844] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.036096] mousedev: PS/2 mouse device common for all mice [ 2.036710] rtc_cmos 00:07: RTC can wake from S4 [ 2.036881] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.037143] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.037503] device-mapper: uevent: version 1.0.3 [ 2.037656] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 2.037725] EISA: Probing bus 0 at eisa.0 [ 2.037729] EISA: Cannot allocate resource for mainboard [ 2.037734] Cannot allocate resource for EISA slot 1 [ 2.037738] Cannot allocate resource for EISA slot 2 [ 2.037741] Cannot allocate resource for EISA slot 3 [ 2.037745] Cannot allocate resource for EISA slot 4 [ 2.037749] Cannot allocate resource for EISA slot 5 [ 2.037753] Cannot allocate resource for EISA slot 6 [ 2.037756] Cannot allocate resource for EISA slot 7 [ 2.037760] Cannot allocate resource for EISA slot 8 [ 2.037764] EISA: Detected 0 cards. [ 2.037782] cpufreq-nforce2: No nForce2 chipset. [ 2.038264] cpuidle: using governor ladder [ 2.039015] cpuidle: using governor menu [ 2.039019] EFI Variables Facility v0.08 2004-May-17 [ 2.040061] TCP cubic registered [ 2.041438] NET: Registered protocol family 10 [ 2.043814] NET: Registered protocol family 17 [ 2.043823] Registering the dns_resolver key type [ 2.044290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.044336] Using IPI No-Shortcut mode [ 2.045620] PM: Hibernation image not present or could not be loaded. [ 2.045644] registered taskstats version 1 [ 2.073070] Magic number: 4:976:796 [ 2.073415] rtc_cmos 00:07: setting system clock to 2012-07-11 18:45:23 UTC (1342032323) [ 2.076654] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.076658] EDD information not available. [ 2.302111] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.302587] ata1.00: ATA-9: M4-CT128M4SSD2, 000F, max UDMA/100 [ 2.302595] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.303143] ata1.00: configured for UDMA/100 [ 2.303453] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 000F PQ: 0 ANSI: 5 [ 2.303746] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.303920] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.304213] sd 0:0:0:0: [sda] Write Protect is off [ 2.304225] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.304471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.306818] sda: sda1 sda2 < sda5 > [ 2.308780] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.318162] Refined TSC clocksource calibration: 1595.999 MHz. [ 2.318169] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.318178] Switching to clocksource tsc [ 2.450939] hub 1-1:1.0: USB hub found [ 2.451121] hub 1-1:1.0: 6 ports detected [ 2.561786] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.621757] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.636143] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100 [ 2.636152] ata2.00: applying bridge limits [ 2.649711] ata2.00: configured for UDMA/100 [ 2.653762] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5 [ 2.661486] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.661494] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.661890] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.662156] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.694649] hub 2-1:1.0: USB hub found [ 2.694840] hub 2-1:1.0: 8 ports detected [ 2.765823] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 2.981454] ata6: SATA link down (SStatus 0 SControl 300) [ 2.982597] Freeing unused kernel memory: 740k freed [ 2.983523] Write protecting the kernel text: 5816k [ 2.983808] Write protecting the kernel read-only data: 2376k [ 2.983811] NX-protecting the kernel data: 4424k [ 3.014594] udevd[127]: starting version 175 [ 3.068925] sdhci: Secure Digital Host Controller Interface driver [ 3.068932] sdhci: Copyright(c) Pierre Ossman [ 3.069714] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1) [ 3.069742] sdhci-pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.069786] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.069798] sdhci-pci 0000:09:00.0: setting latency timer to 64 [ 3.069816] mmc0: no vmmc regulator found [ 3.069877] Registered led device: mmc0:: [ 3.070946] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA [ 3.071078] tg3.c:v3.121 (November 2, 2011) [ 3.071252] tg3 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.071269] tg3 0000:0b:00.0: setting latency timer to 64 [ 3.071403] firewire_ohci 0000:09:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.071417] firewire_ohci 0000:09:00.3: setting latency timer to 64 [ 3.078509] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.078517] EXT4-fs (sda1): write access will be enabled during recovery [ 3.110417] tg3 0000:0b:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address b8:ac:6f:71:02:a6 [ 3.110425] tg3 0000:0b:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 3.110431] tg3 0000:0b:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.110436] tg3 0000:0b:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.125492] firewire_ohci: Added fw-ohci device 0000:09:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 3.390124] EXT4-fs (sda1): orphan cleanup on readonly fs [ 3.390135] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078710 [ 3.390232] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363071 [ 3.390327] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078711 [ 3.390350] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078709 [ 3.390367] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078708 [ 3.390384] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078707 [ 3.390401] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078706 [ 3.390417] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078705 [ 3.390435] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078551 [ 3.390452] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078523 [ 3.390470] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078520 [ 3.390487] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7077901 [ 3.390551] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063272 [ 3.390562] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063266 [ 3.390572] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063261 [ 3.390582] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063256 [ 3.390592] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063255 [ 3.390602] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363072 [ 3.390620] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360050 [ 3.390698] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5250064 [ 3.390710] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365394 [ 3.390728] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365390 [ 3.390745] EXT4-fs (sda1): 22 orphan inodes deleted [ 3.390748] EXT4-fs (sda1): recovery complete [ 3.397636] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.624910] firewire_core: created device fw0: GUID 464fc000110e2661, S400 [ 3.927467] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.929965] udevd[400]: starting version 175 [ 3.933581] Adding 6278140k swap on /dev/sda5. Priority:-1 extents:1 across:6278140k SS [ 3.945183] lp: driver loaded but no devices found [ 3.999389] wmi: Mapper loaded [ 4.016696] ite_cir: Auto-detected model: ITE8708 CIR transceiver [ 4.016702] ite_cir: Using model: ITE8708 CIR transceiver [ 4.016706] ite_cir: TX-capable: 1 [ 4.016710] ite_cir: Sample period (ns): 8680 [ 4.016713] ite_cir: TX carrier frequency (Hz): 38000 [ 4.016716] ite_cir: TX duty cycle (%): 33 [ 4.016719] ite_cir: RX low carrier frequency (Hz): 0 [ 4.016722] ite_cir: RX high carrier frequency (Hz): 0 [ 4.025684] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 4.025691] Disabling lock debugging due to kernel taint [ 4.027410] IR NEC protocol handler initialized [ 4.030250] lib80211: common routines for IEEE802.11 drivers [ 4.030257] lib80211_crypt: registered algorithm 'NULL' [ 4.036024] IR RC5(x) protocol handler initialized [ 4.036092] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.036188] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 4.036307] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4.036361] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 4.039006] acpi device:03: registered as cooling_device10 [ 4.039164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 4.039261] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 4.049753] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.050201] wl 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.050215] wl 0000:05:00.0: setting latency timer to 64 [ 4.052252] Registered IR keymap rc-rc6-mce [ 4.052432] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input6 [ 4.054614] IR RC6 protocol handler initialized [ 4.054787] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0 [ 4.054839] ite_cir: driver has been successfully loaded [ 4.057338] IR JVC protocol handler initialized [ 4.061553] IR Sony protocol handler initialized [ 4.066578] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input7 [ 4.066724] IR MCE Keyboard/mouse protocol handler initialized [ 4.072580] lirc_dev: IR Remote Control driver registered, major 250 [ 4.073280] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0 [ 4.073286] IR LIRC bridge handler initialized [ 4.077849] Linux video capture interface: v2.00 [ 4.079402] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:640f) [ 4.085492] EDAC MC: Ver: 2.1.0 [ 4.087138] lib80211_crypt: registered algorithm 'TKIP' [ 4.091027] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.091733] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.091826] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X [ 4.091861] snd_hda_intel 0000:02:00.1: setting latency timer to 64 [ 4.093115] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 4.112448] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 4.112612] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9 [ 4.113311] type=1400 audit(1342032325.540:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=658 comm="apparmor_parser" [ 4.114501] type=1400 audit(1342032325.540:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=658 comm="apparmor_parser" [ 4.115253] type=1400 audit(1342032325.540:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=658 comm="apparmor_parser" [ 4.121870] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10 [ 4.122096] usbcore: registered new interface driver uvcvideo [ 4.122100] USB Video Class driver (1.1.1) [ 4.128729] [fglrx] Maximum main memory to use for locked dma buffers: 5840 MBytes. [ 4.129678] [fglrx] vendor: 1002 device: 68c0 count: 1 [ 4.131991] [fglrx] ioport: bar 4, base 0x2000, size: 0x100 [ 4.132015] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.132024] pci 0000:02:00.0: setting latency timer to 64 [ 4.133712] [fglrx] Kernel PAT support is enabled [ 4.133747] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 4.162666] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38 [ 4.184133] device-mapper: multipath: version 1.3.0 loaded [ 4.196660] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.279897] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 4.292402] Bluetooth: Core ver 2.16 [ 4.292449] NET: Registered protocol family 31 [ 4.292454] Bluetooth: HCI device and connection manager initialized [ 4.292459] Bluetooth: HCI socket layer initialized [ 4.292463] Bluetooth: L2CAP socket layer initialized [ 4.292473] Bluetooth: SCO socket layer initialized [ 4.296333] Bluetooth: RFCOMM TTY layer initialized [ 4.296342] Bluetooth: RFCOMM socket layer initialized [ 4.296345] Bluetooth: RFCOMM ver 1.11 [ 4.313586] ppdev: user-space parallel port driver [ 4.316619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.316625] Bluetooth: BNEP filters: protocol multicast [ 4.383980] type=1400 audit(1342032325.812:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=938 comm="apparmor_parser" [ 4.385173] type=1400 audit(1342032325.812:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=938 comm="apparmor_parser" [ 4.425757] init: failsafe main process (898) killed by TERM signal [ 4.477052] type=1400 audit(1342032325.904:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1011 comm="apparmor_parser" [ 4.477592] type=1400 audit(1342032325.904:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 4.478099] type=1400 audit(1342032325.904:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1017 comm="apparmor_parser" [ 4.479233] type=1400 audit(1342032325.904:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 4.510060] vesafb: mode is 1152x864x32, linelength=4608, pages=0 [ 4.510065] vesafb: scrolling: redraw [ 4.510071] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.510084] mtrr: no more MTRRs available [ 4.513081] vesafb: framebuffer at 0xd0000000, mapped to 0xf9400000, using 3904k, total 3904k [ 4.515203] Console: switching to colour frame buffer device 144x54 [ 4.515278] fb0: VESA VGA frame buffer device [ 4.590743] tg3 0000:0b:00.0: irq 48 for MSI/MSI-X [ 4.702009] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.704409] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.978379] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 5.030104] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12 [ 5.045782] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 5.519573] [fglrx] ATIF platform detected with notification ID: 0x81 [ 6.391466] fglrx_pci 0000:02:00.0: irq 49 for MSI/MSI-X [ 6.393137] [fglrx] Firegl kernel thread PID: 1305 [ 6.393306] [fglrx] Firegl kernel thread PID: 1306 [ 6.393472] [fglrx] Firegl kernel thread PID: 1307 [ 6.393726] [fglrx] IRQ 49 Enabled [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. [ 6.532080] [fglrx] Gart USWC size:1280 M. [ 6.532084] [fglrx] Gart cacheable size:508 M. [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 [ 17.423743] eth1: no IPv6 routers present [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 [ 543.679614] eth1: no IPv6 routers present lsmod Module Size Used by kvm_intel 127560 0 kvm 359456 1 kvm_intel joydev 17393 0 vesafb 13516 1 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 rfcomm 38139 0 bluetooth 158438 10 bnep,rfcomm dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi binfmt_misc 17292 1 dell_laptop 17767 0 dcdbas 14098 1 dell_laptop dm_multipath 22710 0 fglrx 2909855 143 snd_hda_codec_hdmi 31775 1 psmouse 72919 0 serio_raw 13027 0 i7core_edac 23382 0 lib80211_crypt_tkip 17275 0 edac_core 46858 1 i7core_edac uvcvideo 67203 0 snd_hda_codec_idt 60251 1 videodev 86588 1 uvcvideo ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec ir_mce_kbd_decoder 12681 0 snd_seq_midi 13132 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 snd_rawmidi 25424 1 snd_seq_midi ir_rc6_decoder 12459 0 wl 2646601 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ir_rc5_decoder 12459 0 video 19068 0 snd_hda_intel 32765 5 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel rc_rc6_mce 12454 0 lib80211 14040 2 lib80211_crypt_tkip,wl snd_hwdep 13276 1 snd_hda_codec ir_nec_decoder 12459 0 snd_pcm 80845 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec ite_cir 24743 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ite_cir snd_timer 28931 2 snd_seq,snd_pcm wmi 18744 1 dell_wmi snd 62064 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer mac_hid 13077 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm coretemp 13269 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141369 0 firewire_ohci 40172 0 sdhci_pci 18324 0 firewire_core 56906 1 firewire_ohci sdhci 28241 1 sdhci_pci crc_itu_t 12627 1 firewire_core lshw *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 70:f1:a1:a9:54:31 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.117 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0900000-f0903fff *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0b:00.0 logical name: eth0 version: 10 serial: b8:ac:6f:71:02:a6 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:48 memory:f0d00000-f0d0ffff

  Read the article

• Developing custom MBeans to manage J2EE Applications (Part III)

  - by philippe Le Mouel

  This is the third and final part in a series of blogs, that demonstrate how to add management capability to your own application using JMX MBeans. In Part I we saw: How to implement a custom MBean to manage configuration associated with an application. How to package the resulting code and configuration as part of the application's ear file. How to register MBeans upon application startup, and unregistered them upon application stop (or undeployment). How to use generic JMX clients such as JConsole to browse and edit our application's MBean. In Part II we saw: How to add localized descriptions to our MBean, MBean attributes, MBean operations and MBean operation parameters. How to specify meaningful name to our MBean operation parameters. We also touched on future enhancements that will simplify how we can implement localized MBeans. In this third and last part, we will re-write our MBean to simplify how we added localized descriptions. To do so we will take advantage of the functionality we already described in part II and that is now part of WebLogic 10.3.3.0. We will show how to take advantage of WebLogic's localization support to localize our MBeans based on the client's Locale independently of the server's Locale. Each client will see MBean descriptions localized based on his/her own Locale. We will show how to achieve this using JConsole, and also using a sample programmatic JMX Java client. The complete code sample and associated build files for part III are available as a zip file. The code has been tested against WebLogic Server 10.3.3.0 and JDK6. To build and deploy our sample application, please follow the instruction provided in Part I, as they also apply to part III's code and associated zip file. Providing custom descriptions take II In part II we localized our MBean descriptions by extending the StandardMBean class and overriding its many getDescription methods. WebLogic 10.3.3.0 similarly to JDK 7 can automatically localize MBean descriptions as long as those are specified according to the following conventions: Descriptions resource bundle keys are named according to: MBean description: <MBeanInterfaceClass>.mbean MBean attribute description: <MBeanInterfaceClass>.attribute.<AttributeName> MBean operation description: <MBeanInterfaceClass>.operation.<OperationName> MBean operation parameter description: <MBeanInterfaceClass>.operation.<OperationName>.<ParameterName> MBean constructor description: <MBeanInterfaceClass>.constructor.<ConstructorName> MBean constructor parameter description: <MBeanInterfaceClass>.constructor.<ConstructorName>.<ParameterName> We also purposely named our resource bundle class MBeanDescriptions and included it as part of the same package as our MBean. We already followed the above conventions when creating our resource bundle in part II, and our default resource bundle class with English descriptions looks like: package blog.wls.jmx.appmbean; import java.util.ListResourceBundle; public class MBeanDescriptions extends ListResourceBundle { protected Object[][] getContents() { return new Object[][] { {"PropertyConfigMXBean.mbean", "MBean used to manage persistent application properties"}, {"PropertyConfigMXBean.attribute.Properties", "Properties associated with the running application"}, {"PropertyConfigMXBean.operation.setProperty", "Create a new property, or change the value of an existing property"}, {"PropertyConfigMXBean.operation.setProperty.key", "Name that identify the property to set."}, {"PropertyConfigMXBean.operation.setProperty.value", "Value for the property being set"}, {"PropertyConfigMXBean.operation.getProperty", "Get the value for an existing property"}, {"PropertyConfigMXBean.operation.getProperty.key", "Name that identify the property to be retrieved"} }; } } We have now also added a resource bundle with French localized descriptions: package blog.wls.jmx.appmbean; import java.util.ListResourceBundle; public class MBeanDescriptions_fr extends ListResourceBundle { protected Object[][] getContents() { return new Object[][] { {"PropertyConfigMXBean.mbean", "Manage proprietes sauvegarde dans un fichier disque."}, {"PropertyConfigMXBean.attribute.Properties", "Proprietes associee avec l'application en cour d'execution"}, {"PropertyConfigMXBean.operation.setProperty", "Construit une nouvelle proprietee, ou change la valeur d'une proprietee existante."}, {"PropertyConfigMXBean.operation.setProperty.key", "Nom de la propriete dont la valeur est change."}, {"PropertyConfigMXBean.operation.setProperty.value", "Nouvelle valeur"}, {"PropertyConfigMXBean.operation.getProperty", "Retourne la valeur d'une propriete existante."}, {"PropertyConfigMXBean.operation.getProperty.key", "Nom de la propriete a retrouver."} }; } } So now we can just remove the many getDescriptions methods from our MBean code, and have a much cleaner: package blog.wls.jmx.appmbean; import java.io.IOException; import java.io.InputStream; import java.io.OutputStream; import java.io.FileInputStream; import java.io.FileOutputStream; import java.io.File; import java.net.URL; import java.util.Map; import java.util.HashMap; import java.util.Properties; import javax.management.MBeanServer; import javax.management.ObjectName; import javax.management.MBeanRegistration; import javax.management.StandardMBean; import javax.management.MBeanOperationInfo; import javax.management.MBeanParameterInfo; public class PropertyConfig extends StandardMBean implements PropertyConfigMXBean, MBeanRegistration { private String relativePath_ = null; private Properties props_ = null; private File resource_ = null; private static Map operationsParamNames_ = null; static { operationsParamNames_ = new HashMap(); operationsParamNames_.put("setProperty", new String[] {"key", "value"}); operationsParamNames_.put("getProperty", new String[] {"key"}); } public PropertyConfig(String relativePath) throws Exception { super(PropertyConfigMXBean.class , true); props_ = new Properties(); relativePath_ = relativePath; } public String setProperty(String key, String value) throws IOException { String oldValue = null; if (value == null) { oldValue = String.class.cast(props_.remove(key)); } else { oldValue = String.class.cast(props_.setProperty(key, value)); } save(); return oldValue; } public String getProperty(String key) { return props_.getProperty(key); } public Map getProperties() { return (Map) props_; } private void load() throws IOException { InputStream is = new FileInputStream(resource_); try { props_.load(is); } finally { is.close(); } } private void save() throws IOException { OutputStream os = new FileOutputStream(resource_); try { props_.store(os, null); } finally { os.close(); } } public ObjectName preRegister(MBeanServer server, ObjectName name) throws Exception { // MBean must be registered from an application thread // to have access to the application ClassLoader ClassLoader cl = Thread.currentThread().getContextClassLoader(); URL resourceUrl = cl.getResource(relativePath_); resource_ = new File(resourceUrl.toURI()); load(); return name; } public void postRegister(Boolean registrationDone) { } public void preDeregister() throws Exception {} public void postDeregister() {} protected String getParameterName(MBeanOperationInfo op, MBeanParameterInfo param, int sequence) { return operationsParamNames_.get(op.getName())[sequence]; } } The only reason we are still extending the StandardMBean class, is to override the default values for our operations parameters name. If this isn't a concern, then one could just write the following code: package blog.wls.jmx.appmbean; import java.io.IOException; import java.io.InputStream; import java.io.OutputStream; import java.io.FileInputStream; import java.io.FileOutputStream; import java.io.File; import java.net.URL; import java.util.Properties; import javax.management.MBeanServer; import javax.management.ObjectName; import javax.management.MBeanRegistration; import javax.management.StandardMBean; import javax.management.MBeanOperationInfo; import javax.management.MBeanParameterInfo; public class PropertyConfig implements PropertyConfigMXBean, MBeanRegistration { private String relativePath_ = null; private Properties props_ = null; private File resource_ = null; public PropertyConfig(String relativePath) throws Exception { props_ = new Properties(); relativePath_ = relativePath; } public String setProperty(String key, String value) throws IOException { String oldValue = null; if (value == null) { oldValue = String.class.cast(props_.remove(key)); } else { oldValue = String.class.cast(props_.setProperty(key, value)); } save(); return oldValue; } public String getProperty(String key) { return props_.getProperty(key); } public Map getProperties() { return (Map) props_; } private void load() throws IOException { InputStream is = new FileInputStream(resource_); try { props_.load(is); } finally { is.close(); } } private void save() throws IOException { OutputStream os = new FileOutputStream(resource_); try { props_.store(os, null); } finally { os.close(); } } public ObjectName preRegister(MBeanServer server, ObjectName name) throws Exception { // MBean must be registered from an application thread // to have access to the application ClassLoader ClassLoader cl = Thread.currentThread().getContextClassLoader(); URL resourceUrl = cl.getResource(relativePath_); resource_ = new File(resourceUrl.toURI()); load(); return name; } public void postRegister(Boolean registrationDone) { } public void preDeregister() throws Exception {} public void postDeregister() {} } Note: The above would also require changing the operations parameters name in the resource bundle classes. For instance: PropertyConfigMXBean.operation.setProperty.key would become: PropertyConfigMXBean.operation.setProperty.p0 Client based localization When accessing our MBean using JConsole started with the following command line: jconsole -J-Djava.class.path=$JAVA_HOME/lib/jconsole.jar:$JAVA_HOME/lib/tools.jar: $WL_HOME/server/lib/wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote -debug We see that our MBean descriptions are localized according to the WebLogic's server Locale. English in this case: Note: Consult Part I for information on how to use JConsole to browse/edit our MBean. Now if we specify the client's Locale as part of the JConsole command line as follow: jconsole -J-Djava.class.path=$JAVA_HOME/lib/jconsole.jar:$JAVA_HOME/lib/tools.jar: $WL_HOME/server/lib/wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote -J-Dweblogic.management.remote.locale=fr-FR -debug We see that our MBean descriptions are now localized according to the specified client's Locale. French in this case: We use the weblogic.management.remote.locale system property to specify the Locale that should be associated with the cient's JMX connections. The value is composed of the client's language code and its country code separated by the - character. The country code is not required, and can be omitted. For instance: -Dweblogic.management.remote.locale=fr We can also specify the client's Locale using a programmatic client as demonstrated below: package blog.wls.jmx.appmbean.client; import javax.management.MBeanServerConnection; import javax.management.ObjectName; import javax.management.MBeanInfo; import javax.management.remote.JMXConnector; import javax.management.remote.JMXServiceURL; import javax.management.remote.JMXConnectorFactory; import java.util.Hashtable; import java.util.Set; import java.util.Locale; public class JMXClient { public static void main(String[] args) throws Exception { JMXConnector jmxCon = null; try { JMXServiceURL serviceUrl = new JMXServiceURL( "service:jmx:iiop://127.0.0.1:7001/jndi/weblogic.management.mbeanservers.runtime"); System.out.println("Connecting to: " + serviceUrl); // properties associated with the connection Hashtable env = new Hashtable(); env.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "weblogic.management.remote"); String[] credentials = new String[2]; credentials[0] = "weblogic"; credentials[1] = "weblogic"; env.put(JMXConnector.CREDENTIALS, credentials); // specifies the client's Locale env.put("weblogic.management.remote.locale", Locale.FRENCH); jmxCon = JMXConnectorFactory.newJMXConnector(serviceUrl, env); jmxCon.connect(); MBeanServerConnection con = jmxCon.getMBeanServerConnection(); Set mbeans = con.queryNames( new ObjectName( "blog.wls.jmx.appmbean:name=myAppProperties,type=PropertyConfig,*"), null); for (ObjectName mbeanName : mbeans) { System.out.println("\n\nMBEAN: " + mbeanName); MBeanInfo minfo = con.getMBeanInfo(mbeanName); System.out.println("MBean Description: "+minfo.getDescription()); System.out.println("\n"); } } finally { // release the connection if (jmxCon != null) jmxCon.close(); } } } The above client code is part of the zip file associated with this blog, and can be run using the provided client.sh script. The resulting output is shown below: $ ./client.sh Connecting to: service:jmx:iiop://127.0.0.1:7001/jndi/weblogic.management.mbeanservers.runtime MBEAN: blog.wls.jmx.appmbean:type=PropertyConfig,name=myAppProperties MBean Description: Manage proprietes sauvegarde dans un fichier disque. $ Miscellaneous Using Description annotation to specify MBean descriptions Earlier we have seen how to name our MBean descriptions resource keys, so that WebLogic 10.3.3.0 automatically uses them to localize our MBean. In some cases we might want to implicitly specify the resource key, and resource bundle. For instance when operations are overloaded, and the operation name is no longer sufficient to uniquely identify a single operation. In this case we can use the Description annotation provided by WebLogic as follow: import weblogic.management.utils.Description; @Description(resourceKey="myapp.resources.TestMXBean.description", resourceBundleBaseName="myapp.resources.MBeanResources") public interface TestMXBean { @Description(resourceKey="myapp.resources.TestMXBean.threshold.description", resourceBundleBaseName="myapp.resources.MBeanResources" ) public int getthreshold(); @Description(resourceKey="myapp.resources.TestMXBean.reset.description", resourceBundleBaseName="myapp.resources.MBeanResources") public int reset( @Description(resourceKey="myapp.resources.TestMXBean.reset.id.description", resourceBundleBaseName="myapp.resources.MBeanResources", displayNameKey= "myapp.resources.TestMXBean.reset.id.displayName.description") int id); } The Description annotation should be applied to the MBean interface. It can be used to specify MBean, MBean attributes, MBean operations, and MBean operation parameters descriptions as demonstrated above. Retrieving the Locale associated with a JMX operation from the MBean code There are several cases where it is necessary to retrieve the Locale associated with a JMX call from the MBean implementation. For instance this can be useful when localizing exception messages. This can be done as follow: import weblogic.management.mbeanservers.JMXContextUtil; ...... // some MBean method implementation public String setProperty(String key, String value) throws IOException { Locale callersLocale = JMXContextUtil.getLocale(); // use callersLocale to localize Exception messages or // potentially some return values such a Date .... } Conclusion With this last part we conclude our three part series on how to write MBeans to manage J2EE applications. We are far from having exhausted this particular topic, but we have gone a long way and are now capable to take advantage of the latest functionality provided by WebLogic's application server to write user friendly MBeans.

  Read the article

• How can I specify resources in an MVVM view model?

  - by gix

  Suppose I want to show list of objects where each object should have a name and a suitable image (for example MenuItems with Icons, or buttons with text and image). All examples and programs exposed the image in the viewmodel as a path to a PNG file and then bound the Source of an Image to that. But what if I want to use vector images (for example as a DrawingImage in a local ResourceDictionary)? Exposing the DrawingImage from the view model seems bad because I would have to store a reference to the application/window/user control/... (and it is advised to not expose such XAML objects from view models). So a better approach would be to use a string identifier in the view model and then somehow select the appropriate resource. If that identifier is the resource key this snippet looks tempting but does not work: <Image Source="{StaticResource {Binding Icon}}"/> I found two workarounds for that though they did not work for me. The first one was using a normal binding to the icon with a converter that looked up the resource in Application.Current. This does not work if the resource is stored somewhere else I think (and the situation where I initially bumped into this problem had no Application running yet since it was a Window choosing the Application to launch!). The second workaround was using a markup extension derived from StaticResourceExtension that fetched its ResourceKey from the passed binding: <Image Source="{local:BindableStaticResource {Binding Icon}"/> This one looks really neat because it could use local resources, also be used for other things. But when using it I always got an exception ("Resource named {FooIcon} could not be found.", showing the correct XAML file and position of the extension). Even an empty resource extension derived from StaticResourceExtension that just passed the resource key to the base constructor did not work and I cannot explain why. Just using StaticResourceExtension worked just fine. Any ideas how I could fix the second approach, or even better solutions? Edit I noticed that it does work when used directly like this: <Window> <Window.Resources> <DrawingImage x:Key="SomeIcon"/> </Window.Resources> <Image Source="{BindableStaticResource {Binding Icon}}"/> </Window> but fails for example in a DataTemplate. Though a normal StaticResourceExtension works on both occasions so I am puzzled what is going wrong.

  Read the article

• Cisco Unifed Communication integration for Microsoft Lync crashes on Remote Desktop services 2008 R2!

  - by user66267

  Hi everybody i have deployed office communication server 2007 R2 and communicator 2007 R2 and i made integration with Cisco Unified Communication Manager 7.1 in my network, i also uses Remote Desktop Servers 2008 R2 for Thin Client Computers, now that i installed Cisco UC integration client for communicator 2007 R2 (Ver. 8.0.3) or Cisco UC integration client for Microsoft Lync that works fine on PCs but Not on Remote Desktop Servers. i have Three Remote Desktop Servers in a Farm with loadbalancing enabled. all other applications on these RDP servers works fine for 120 active users. some times when i start Cisco UC client on Remote Desktop servers i get the following error "The Port Reguired for callbacks from Cisco unified client framework could not be read, please retry" i also found the folowing log so i think that may be the cause: 2011-01-05 08:24:21,489 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.SingleInstanceManager] [SingleInstanceManager.acquireMutex(0)] - Acquiring Mutex... 2011-01-05 08:24:21,512 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.IPC.PipeServer] [PipeServer.start(0)] - Starting Pipe Server 2011-01-05 08:24:21,516 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.SingleInstanceManager] [SingleInstanceManager.acquireMutex(0)] - Mutex Acquired... 2011-01-05 08:24:25,437 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.process.ProcessUtil] [ProcessUtil.isOtherPRTProcessRunning(0)] - No other instance(s) of ProblemReportingTool.exe found 2011-01-05 08:24:25,438 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - ******************************* 2011-01-05 08:24:25,439 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - **Launching CUCSF Problem Reporting Tool v0.8.3.2** 2011-01-05 08:24:25,440 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - ******************************* 2011-01-05 08:24:25,441 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - Raw input: -reason=Launched by the user from CUCIMOC ver 8.5.105.17095 -file=C:\Users\MA899~1.SAD\AppData\Local\Temp\36\CUCIMOCInstaller.txt 2011-01-05 08:24:25,445 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - Current culture: English (United States) 2011-01-05 08:24:25,448 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.init(0)] - Loading string resources from file 2011-01-05 08:24:25,455 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.context.CLIUtil] [CLIUtil.parse(0)] - Argument -reason Launched by the user from CUCIMOC ver 8.5.105.17095 received 2011-01-05 08:24:25,456 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.context.CLIUtil] [CLIUtil.parse(0)] - Argument -file C:\Users\MA899~1.SAD\AppData\Local\Temp\36\CUCIMOCInstaller.txt received 2011-01-05 08:24:25,457 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.startup(0)] - Launching GUI... 2011-01-05 08:24:25,536 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PROG.PleaseWaitText from resource file 2011-01-05 08:24:25,545 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.OKButtonText from resource file 2011-01-05 08:24:25,548 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.CancelButtonText from resource file 2011-01-05 08:24:25,549 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.ErrorMsgText1 from resource file 2011-01-05 08:24:25,549 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.Title from resource file 2011-01-05 08:24:25,552 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.WindowTitle from resource file 2011-01-05 08:24:25,553 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.AgreeText from resource file 2011-01-05 08:24:25,553 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.PrivacyText from resource file 2011-01-05 08:24:25,554 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.PrivacyTitle from resource file 2011-01-05 08:24:25,555 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.PrivacyLinkText from resource file 2011-01-05 08:24:25,555 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.DescriptionTitle from resource file 2011-01-05 08:24:25,629 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager..ctor(0)] - Starting SysInfoManager... 2011-01-05 08:24:25,634 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: systeminfo.exe 2011-01-05 08:24:25,669 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: tasklist.exe 2011-01-05 08:24:25,672 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: ipconfig.exe 2011-01-05 08:24:25,676 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: netstat.exe 2011-01-05 08:24:25,684 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: net.exe 2011-01-05 08:24:25,926 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchHardwareInfoThread(0)] - Launching worker thread: HardwareInfo 2011-01-05 08:24:25,928 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getHardWareInfo(0)] - Gathering CPU data 2011-01-05 08:24:26,149 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchCSFDirectoryInfoThread(0)] - Gathering CSF Directory Listing 2011-01-05 08:24:26,153 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [CSFDirectoryInfo.getCSFInstallPath(0)] - Retrieving CSF Install Directory 2011-01-05 08:24:26,159 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [CSFDirectoryInfo.getCSFInstallPath(0)] - CSF Install Path: C:\Program Files (x86)\Common Files\Cisco Systems\Client Services Framework 2011-01-05 08:24:26,162 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchWMIInfoThread(0)] - Launching worker thread: WMIInfo 2011-01-05 08:24:26,164 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getWMIInfo(0)] - Gathering Audio info... 2011-01-05 08:24:26,168 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchRegistryAndEnvironmentalVarInfoThread(0)] - Launching worker thread: Registry & Environment Variables 2011-01-05 08:24:26,173 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\Cisco Systems, Inc.\Client Services Framework\AdminData\ 2011-01-05 08:24:26,180 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\Policies\Cisco Systems, Inc.\Client Services Framework\AdminData\ 2011-01-05 08:24:26,182 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\Cisco Systems, Inc.\Unified Communications\CUCSF 2011-01-05 08:24:26,183 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment 2011-01-05 08:24:26,184 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment\1.6 2011-01-05 08:24:26,186 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment\1.6.0_17 2011-01-05 08:24:26,188 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment\1.6.0_17\MSI 2011-01-05 08:24:26,190 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.gatherRegistryAndEnvInfo(0)] - Gathering Environment Variables data 2011-01-05 08:24:26,283 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getWMIInfo(0)] - Gathering Video driver info... 2011-01-05 08:24:26,750 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.writeFile(0)] - Creating file: DirectoryInfo.txt 2011-01-05 08:24:26,759 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getWMIInfo(0)] - Gathering Monitor info... 2011-01-05 08:24:34,483 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.gatherFiles(0)] - Config Dir C:\Users\m.sadeghi\AppData\Roaming\Cisco\Unified Communications\ 2011-01-05 08:24:34,530 [WARN ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.addFile(0)] - C:\Users\MA899~1.SAD\AppData\Local\Temp\36\CUCIMOCInstaller.txt not found 2011-01-05 08:24:34,561 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.addSystemInfo(0)] - Waiting for worker threads... 2011-01-05 08:24:38,180 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getHardWareInfo(0)] - Gathering Resolution data 2011-01-05 08:24:55,565 [ERROR] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.addSystemInfo(0)] - One or more worker threads have not returned in a timely manner. Forcing quit. 2011-01-05 08:24:55,568 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.writeFile(0)] - Creating file: SystemInfo.txt 2011-01-05 08:24:55,577 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Checking for files to be excluded 2011-01-05 08:24:55,578 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: d11bfd8f-9745-41db-a35b-200389e65583.dat 2011-01-05 08:24:55,579 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: cacerts 2011-01-05 08:24:55,580 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: Voicemail.2639.20110103081119+0330.wav 2011-01-05 08:24:55,581 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: Voicemail.farhad.20101224165510+0330.wav 2011-01-05 08:24:55,581 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: Voicemail.postmaster.20101224165906+0330.wav 2011-01-05 08:24:55,582 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: VoicemailBeep.wav 2011-01-05 08:24:55,583 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: secModeNone 2011-01-05 08:24:55,586 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Preparing to create zip file... 2011-01-05 08:24:55,588 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - 60 files found 2011-01-05 08:24:55,589 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying .CSFExit.loc to temp folder. 2011-01-05 08:24:55,595 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CSF.loc to temp folder. 2011-01-05 08:24:55,597 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CsfAddress.dat to temp folder. 2011-01-05 08:24:55,600 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CSFLogSetting.dat to temp folder. 2011-01-05 08:24:55,634 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CSFSecurityKey.dat to temp folder. 2011-01-05 08:24:55,637 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CommunicationHistory.xml to temp folder. 2011-01-05 08:24:55,641 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying MehdiSadeghi.cnf.xml to temp folder. 2011-01-05 08:24:55,751 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying jtapi.jar to temp folder. 2011-01-05 08:24:55,812 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi.index to temp folder. 2011-01-05 08:24:55,820 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi01.log to temp folder. 2011-01-05 08:24:55,887 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi02.log to temp folder. 2011-01-05 08:24:55,968 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi03.log to temp folder. 2011-01-05 08:24:55,972 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi04.log to temp folder. 2011-01-05 08:24:56,008 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi05.log to temp folder. 2011-01-05 08:24:56,038 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi06.log to temp folder. 2011-01-05 08:24:56,079 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi07.log to temp folder. 2011-01-05 08:24:56,100 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi08.log to temp folder. 2011-01-05 08:24:56,140 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi09.log to temp folder. 2011-01-05 08:24:56,215 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi10.log to temp folder. 2011-01-05 08:24:56,296 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log to temp folder. 2011-01-05 08:24:56,319 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.1 to temp folder. 2011-01-05 08:24:56,498 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.2 to temp folder. 2011-01-05 08:24:56,708 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.3 to temp folder. 2011-01-05 08:24:56,912 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.4 to temp folder. 2011-01-05 08:24:57,105 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.5 to temp folder. 2011-01-05 08:24:57,292 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.6 to temp folder. 2011-01-05 08:24:57,505 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying tracker.log to temp folder. 2011-01-05 08:24:57,523 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying VideoEngineEncryptedTrace.txt to temp folder. 2011-01-05 08:24:57,542 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying VoiceEngineDebugTrace.txt to temp folder. 2011-01-05 08:24:57,545 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying VoiceEngineTrace.txt to temp folder. 2011-01-05 08:24:57,548 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying operationreport.log to temp folder. 2011-01-05 08:24:57,551 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying voicemailbox.dat to temp folder. 2011-01-05 08:24:57,554 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying voicemailfolder.dat to temp folder. 2011-01-05 08:24:57,558 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying UIPrefs.xml to temp folder. 2011-01-05 08:24:57,562 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log to temp folder. 2011-01-05 08:24:57,569 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.1 to temp folder. 2011-01-05 08:24:57,752 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.10 to temp folder. 2011-01-05 08:24:58,099 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.2 to temp folder. 2011-01-05 08:24:58,302 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.3 to temp folder. 2011-01-05 08:24:58,517 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.4 to temp folder. 2011-01-05 08:24:58,697 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.5 to temp folder. 2011-01-05 08:24:58,899 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.6 to temp folder. 2011-01-05 08:24:59,100 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.7 to temp folder. 2011-01-05 08:24:59,303 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.8 to temp folder. 2011-01-05 08:24:59,500 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.9 to temp folder. 2011-01-05 08:24:59,895 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Cisco.ClickToCall.Common.Core.dll.config to temp folder. 2011-01-05 08:24:59,915 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying ClickToCall.pref to temp folder. 2011-01-05 08:24:59,918 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoClickToCall.dll.config to temp folder. 2011-01-05 08:24:59,928 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoClickToCallContacts.dll.config to temp folder. 2011-01-05 08:24:59,948 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoPersonName.dll.config to temp folder. 2011-01-05 08:24:59,980 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying userData.properties to temp folder. 2011-01-05 08:24:59,988 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying userData.properties.backup to temp folder. 2011-01-05 08:24:59,990 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying cisco-uc-client.log4net.config to temp folder. 2011-01-05 08:24:59,994 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying cisco-uc-tab.log4net.config to temp folder. 2011-01-05 08:25:00,011 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying LocalSettings.xml to temp folder. 2011-01-05 08:25:00,025 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Description.txt to temp folder. 2011-01-05 08:25:00,028 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying LaunchInfo.txt to temp folder. 2011-01-05 08:25:00,031 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying DirectoryInfo.txt to temp folder. 2011-01-05 08:25:00,034 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying SystemInfo.txt to temp folder. 2011-01-05 08:25:00,036 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying csf-prt.log to temp folder.

  Read the article

• Cisco Unified Communication integration for Microsoft Lync crashes on Remote Desktop services 2008 R2!

  - by user66267

  Hi everybody i have deployed office communication server 2007 R2 and communicator 2007 R2 and i made integration with Cisco Unified Communication Manager 7.1 in my network, i also use Remote Desktop Servers 2008 R2 for Thin Client Computers, now that i installed Cisco UC integration client for communicator 2007 R2 (Ver. 8.0.3) or Cisco UC integration client for Microsoft Lync that works fine on PCs but Not on Remote Desktop Servers. i have Three Remote Desktop Servers in a Farm with loadbalancing enabled. all other applications on these RDP servers works fine for 120 active users. some times when i start Cisco UC client on Remote Desktop servers i get the following error: "The Port Reguired for callbacks from Cisco unified client framework could not be read, please retry" i also found the folowing log so i think that may be the cause: 2011-01-05 08:24:21,489 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.SingleInstanceManager] [SingleInstanceManager.acquireMutex(0)] - Acquiring Mutex... 2011-01-05 08:24:21,512 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.IPC.PipeServer] [PipeServer.start(0)] - Starting Pipe Server 2011-01-05 08:24:21,516 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.SingleInstanceManager] [SingleInstanceManager.acquireMutex(0)] - Mutex Acquired... 2011-01-05 08:24:25,437 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.process.ProcessUtil] [ProcessUtil.isOtherPRTProcessRunning(0)] - No other instance(s) of ProblemReportingTool.exe found 2011-01-05 08:24:25,438 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - ******************************* 2011-01-05 08:24:25,439 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - **Launching CUCSF Problem Reporting Tool v0.8.3.2** 2011-01-05 08:24:25,440 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - ******************************* 2011-01-05 08:24:25,441 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - Raw input: -reason=Launched by the user from CUCIMOC ver 8.5.105.17095 -file=C:\Users\MA899~1.SAD\AppData\Local\Temp\36\CUCIMOCInstaller.txt 2011-01-05 08:24:25,445 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.Main(0)] - Current culture: English (United States) 2011-01-05 08:24:25,448 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.init(0)] - Loading string resources from file 2011-01-05 08:24:25,455 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.context.CLIUtil] [CLIUtil.parse(0)] - Argument -reason Launched by the user from CUCIMOC ver 8.5.105.17095 received 2011-01-05 08:24:25,456 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.context.CLIUtil] [CLIUtil.parse(0)] - Argument -file C:\Users\MA899~1.SAD\AppData\Local\Temp\36\CUCIMOCInstaller.txt received 2011-01-05 08:24:25,457 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.controller.Controller] [Controller.startup(0)] - Launching GUI... 2011-01-05 08:24:25,536 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PROG.PleaseWaitText from resource file 2011-01-05 08:24:25,545 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.OKButtonText from resource file 2011-01-05 08:24:25,548 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.CancelButtonText from resource file 2011-01-05 08:24:25,549 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.ErrorMsgText1 from resource file 2011-01-05 08:24:25,549 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.Title from resource file 2011-01-05 08:24:25,552 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.WindowTitle from resource file 2011-01-05 08:24:25,553 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.AgreeText from resource file 2011-01-05 08:24:25,553 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.PrivacyText from resource file 2011-01-05 08:24:25,554 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.PrivacyTitle from resource file 2011-01-05 08:24:25,555 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.PrivacyLinkText from resource file 2011-01-05 08:24:25,555 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.controller.ResourceUtil] [ResourceUtil.getResourceFileString(0)] - Retrieving Key: com.cisco.uc.csf.prt.PF.DescriptionTitle from resource file 2011-01-05 08:24:25,629 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager..ctor(0)] - Starting SysInfoManager... 2011-01-05 08:24:25,634 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: systeminfo.exe 2011-01-05 08:24:25,669 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: tasklist.exe 2011-01-05 08:24:25,672 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: ipconfig.exe 2011-01-05 08:24:25,676 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: netstat.exe 2011-01-05 08:24:25,684 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.WindowsUtilsInfo] [WindowsUtilsInfo.startWindowsUtilsThreads(0)] - Launching worker thread: net.exe 2011-01-05 08:24:25,926 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchHardwareInfoThread(0)] - Launching worker thread: HardwareInfo 2011-01-05 08:24:25,928 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getHardWareInfo(0)] - Gathering CPU data 2011-01-05 08:24:26,149 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchCSFDirectoryInfoThread(0)] - Gathering CSF Directory Listing 2011-01-05 08:24:26,153 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [CSFDirectoryInfo.getCSFInstallPath(0)] - Retrieving CSF Install Directory 2011-01-05 08:24:26,159 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [CSFDirectoryInfo.getCSFInstallPath(0)] - CSF Install Path: C:\Program Files (x86)\Common Files\Cisco Systems\Client Services Framework 2011-01-05 08:24:26,162 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchWMIInfoThread(0)] - Launching worker thread: WMIInfo 2011-01-05 08:24:26,164 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getWMIInfo(0)] - Gathering Audio info... 2011-01-05 08:24:26,168 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.launchRegistryAndEnvironmentalVarInfoThread(0)] - Launching worker thread: Registry & Environment Variables 2011-01-05 08:24:26,173 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\Cisco Systems, Inc.\Client Services Framework\AdminData\ 2011-01-05 08:24:26,180 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\Policies\Cisco Systems, Inc.\Client Services Framework\AdminData\ 2011-01-05 08:24:26,182 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\Cisco Systems, Inc.\Unified Communications\CUCSF 2011-01-05 08:24:26,183 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment 2011-01-05 08:24:26,184 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment\1.6 2011-01-05 08:24:26,186 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment\1.6.0_17 2011-01-05 08:24:26,188 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.generateRegString(0)] - Gathering Registry data under: Software\JavaSoft\Java Runtime Environment\1.6.0_17\MSI 2011-01-05 08:24:26,190 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.RegistryEnvironmentInfo] [RegistryEnvironmentInfo.gatherRegistryAndEnvInfo(0)] - Gathering Environment Variables data 2011-01-05 08:24:26,283 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getWMIInfo(0)] - Gathering Video driver info... 2011-01-05 08:24:26,750 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.writeFile(0)] - Creating file: DirectoryInfo.txt 2011-01-05 08:24:26,759 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getWMIInfo(0)] - Gathering Monitor info... 2011-01-05 08:24:34,483 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.gatherFiles(0)] - Config Dir C:\Users\m.sadeghi\AppData\Roaming\Cisco\Unified Communications\ 2011-01-05 08:24:34,530 [WARN ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.addFile(0)] - C:\Users\MA899~1.SAD\AppData\Local\Temp\36\CUCIMOCInstaller.txt not found 2011-01-05 08:24:34,561 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.addSystemInfo(0)] - Waiting for worker threads... 2011-01-05 08:24:38,180 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.CSFDirectoryInfo] [HardwareInfo.getHardWareInfo(0)] - Gathering Resolution data 2011-01-05 08:24:55,565 [ERROR] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.addSystemInfo(0)] - One or more worker threads have not returned in a timely manner. Forcing quit. 2011-01-05 08:24:55,568 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.sysinfo.SysInfoManager] [SysInfoManager.writeFile(0)] - Creating file: SystemInfo.txt 2011-01-05 08:24:55,577 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Checking for files to be excluded 2011-01-05 08:24:55,578 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: d11bfd8f-9745-41db-a35b-200389e65583.dat 2011-01-05 08:24:55,579 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: cacerts 2011-01-05 08:24:55,580 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: Voicemail.2639.20110103081119+0330.wav 2011-01-05 08:24:55,581 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: Voicemail.farhad.20101224165510+0330.wav 2011-01-05 08:24:55,581 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: Voicemail.postmaster.20101224165906+0330.wav 2011-01-05 08:24:55,582 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: VoicemailBeep.wav 2011-01-05 08:24:55,583 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.FileUtil] [FileUtil.removePrivateFiles(0)] - Excluding: secModeNone 2011-01-05 08:24:55,586 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Preparing to create zip file... 2011-01-05 08:24:55,588 [INFO ] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - 60 files found 2011-01-05 08:24:55,589 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying .CSFExit.loc to temp folder. 2011-01-05 08:24:55,595 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CSF.loc to temp folder. 2011-01-05 08:24:55,597 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CsfAddress.dat to temp folder. 2011-01-05 08:24:55,600 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CSFLogSetting.dat to temp folder. 2011-01-05 08:24:55,634 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CSFSecurityKey.dat to temp folder. 2011-01-05 08:24:55,637 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CommunicationHistory.xml to temp folder. 2011-01-05 08:24:55,641 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying MehdiSadeghi.cnf.xml to temp folder. 2011-01-05 08:24:55,751 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying jtapi.jar to temp folder. 2011-01-05 08:24:55,812 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi.index to temp folder. 2011-01-05 08:24:55,820 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi01.log to temp folder. 2011-01-05 08:24:55,887 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi02.log to temp folder. 2011-01-05 08:24:55,968 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi03.log to temp folder. 2011-01-05 08:24:55,972 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi04.log to temp folder. 2011-01-05 08:24:56,008 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi05.log to temp folder. 2011-01-05 08:24:56,038 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi06.log to temp folder. 2011-01-05 08:24:56,079 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi07.log to temp folder. 2011-01-05 08:24:56,100 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi08.log to temp folder. 2011-01-05 08:24:56,140 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi09.log to temp folder. 2011-01-05 08:24:56,215 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoJtapi10.log to temp folder. 2011-01-05 08:24:56,296 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log to temp folder. 2011-01-05 08:24:56,319 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.1 to temp folder. 2011-01-05 08:24:56,498 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.2 to temp folder. 2011-01-05 08:24:56,708 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.3 to temp folder. 2011-01-05 08:24:56,912 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.4 to temp folder. 2011-01-05 08:24:57,105 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.5 to temp folder. 2011-01-05 08:24:57,292 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Core.log.6 to temp folder. 2011-01-05 08:24:57,505 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying tracker.log to temp folder. 2011-01-05 08:24:57,523 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying VideoEngineEncryptedTrace.txt to temp folder. 2011-01-05 08:24:57,542 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying VoiceEngineDebugTrace.txt to temp folder. 2011-01-05 08:24:57,545 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying VoiceEngineTrace.txt to temp folder. 2011-01-05 08:24:57,548 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying operationreport.log to temp folder. 2011-01-05 08:24:57,551 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying voicemailbox.dat to temp folder. 2011-01-05 08:24:57,554 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying voicemailfolder.dat to temp folder. 2011-01-05 08:24:57,558 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying UIPrefs.xml to temp folder. 2011-01-05 08:24:57,562 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log to temp folder. 2011-01-05 08:24:57,569 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.1 to temp folder. 2011-01-05 08:24:57,752 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.10 to temp folder. 2011-01-05 08:24:58,099 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.2 to temp folder. 2011-01-05 08:24:58,302 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.3 to temp folder. 2011-01-05 08:24:58,517 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.4 to temp folder. 2011-01-05 08:24:58,697 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.5 to temp folder. 2011-01-05 08:24:58,899 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.6 to temp folder. 2011-01-05 08:24:59,100 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.7 to temp folder. 2011-01-05 08:24:59,303 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.8 to temp folder. 2011-01-05 08:24:59,500 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying uc-client.log.9 to temp folder. 2011-01-05 08:24:59,895 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Cisco.ClickToCall.Common.Core.dll.config to temp folder. 2011-01-05 08:24:59,915 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying ClickToCall.pref to temp folder. 2011-01-05 08:24:59,918 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoClickToCall.dll.config to temp folder. 2011-01-05 08:24:59,928 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoClickToCallContacts.dll.config to temp folder. 2011-01-05 08:24:59,948 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying CiscoPersonName.dll.config to temp folder. 2011-01-05 08:24:59,980 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying userData.properties to temp folder. 2011-01-05 08:24:59,988 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying userData.properties.backup to temp folder. 2011-01-05 08:24:59,990 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying cisco-uc-client.log4net.config to temp folder. 2011-01-05 08:24:59,994 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying cisco-uc-tab.log4net.config to temp folder. 2011-01-05 08:25:00,011 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying LocalSettings.xml to temp folder. 2011-01-05 08:25:00,025 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying Description.txt to temp folder. 2011-01-05 08:25:00,028 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying LaunchInfo.txt to temp folder. 2011-01-05 08:25:00,031 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying DirectoryInfo.txt to temp folder. 2011-01-05 08:25:00,034 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying SystemInfo.txt to temp folder. 2011-01-05 08:25:00,036 [DEBUG] [com.cisco.uc.ucsf.ProblemReportingTool.file.Zip] [Zip.zipMultipleFiles(0)] - Copying csf-prt.log to temp folder.

  Read the article

• Locking Cache Key without Locking the entire Cache

  - by Gandalf

  I have servlets that caches user information rather then retrieving it from the user store on every request (shared Ehcache). The issue I have is that if a client is multi-threaded and they make more then one simultaneous request, before they have been authenticated, then I get this in my log: Retrieving User [Bob] Retrieving User [Bob] Retrieving User [Bob] Returned [Bob] ...caching Returned [Bob] ...caching Returned [Bob] ...caching What I would want is that the first request would call the user service, while the other two requests get blocked - and when the first request returns, and then caches the object, the other two requests go through: Retrieving User [Bob] blocking... blocking... Returned [Bob] ...caching [Bob] found in cache [Bob] found in cache I've thought about locking on the String "Bob" (because due to interning it's always the same object right?). Would that work? And if so how do I keep track of the keys that actually exist in the cache and build a locking mechanism around them that would then return the valid object once it's retrieved. Thanks.

  Read the article

• On REST: WADL or not IDL, is the following approach right ?

  - by redben

  This question is a bit long, please bear with me. In REST, i think we should not need WADL or any IDL. But rather something that would implicitly cover its concept. The way I think about it is when we (humans) surf the Web, when we go to a web site for the first time, we don't know what services it provides. You discover those on the html home page (or a sitemap page in a help section) or maybe just the main menu on the home page. If you make an analogy, the homepage or site map to us humans is what WSDL is to WS-* or what WADL could be to a REST service. Only that its just like any other html content. I think that in REST the following is a good way to do things, respecting the HATEOS paradigm. Have a top level (or default) resource that lists links to your other resources. For a library example, say RestLibrary.com/ it could be something like: <root xmlns:lib="http://librarystandards.com/libraryml"> <resource class="lib:book"> <link type="application/vnd.libraryml+xml" template="mylib.com/book/{isbn}" /> <link type="application/vnd.libraryml+xml" rel="add" href="mylib.com/book" method="POST" /> <link type="application/vnd.libraryml+xml" rel="update" template="mylib.com/book/{isbn}" method="PUT" /> </resource> <resource class="lib:bookList"> <link template="mylib.com/book?keywords={keywords}" type="application/vnd.openlibrary+xml" rel="search" /> </resource> </root> Note that it is assumed that the media type "application/vnd.libraryml+xml" is a defined standard or (may be just proprietary vocabulary) named libraryml. Also, the client should be able to understand this "homepage" resource (elements root, resource and link). This is the part that could be used instead of WADL : an Abstract vocabulary that should be understandable by any client. You could use an existing standard like Atom for example. But the main idea is to have an abstract vocabulary understandable by any client. Why not WADL then ? well wadl is only for service discovery. The idea here is to have an light abstract vocabulary that would serve as a base for hypermedia. A "root" vocabulary. Like in owl we have owl:thing...etc Now if the client knows the "libraryml" standard it can follow the links to the things it understands (after parsing the media type properties and xmlns). If not, it just won't. When i can't understand how to deal with something in REST architecture i tend to see how we Humans do it in the Web. In the Web, we have the Generic language that is HTML that enables site builders to deliver any specific content, regardless of its meaning to the client (the user), Browsers understand HTML but not the "meaning" of its content. It is the user that understands the (domain specific) content. If i go to say QuantumPhysics.org, my browser can render the home page (it is just html after all) and i can read the home page. If i understand quantum then fine i can continue browsing. If i don't i just get out (unless i want to learn the hardway :) ) In the RetsLibrary.com example the client app is just like me+my browser on QuantumPhysics.org. the media type "application/vnd.libraryml+xml" is quantum physics (knowledge). http is http in both examples. Now HTML of QuantumPhysics.org is in RestLibrary.com is XML + that tiny little abstract vocabulary (root resource and link, that you could replace with something like Atom). So does this approach have any value ? don't we need a root tiny hyper-vocabulary so we can succeed with hypermedia and the "initial URI" concept ? edit Yeah why not RDF as the root vocabulary !

  Read the article

• Adding OutputCache to a WebForm crashes my site :(

  - by Pure.Krome

  Hi folks, When I add either ... <%@ OutputCache Duration="600" Location="Any" VaryByParam="*" %> or <%@ OutputCache CacheProfile="CmsArticlesListOrItem" %> (.. and this into the web.config file...) <caching> <outputCacheSettings> <outputCacheProfiles> <add name="CmsArticlesListOrItem" duration="600" varyByParam="*" /> </outputCacheProfiles> </outputCacheSettings> <sqlCacheDependency ........ ></sqlCacheDependency </caching> my page/site crashes with the following error:- Source: System.Web ---------------------------------------------------------------------------- TargetSite: System.Web.DirectoryMonitor FindDirectoryMonitor(System.String, Boolean, Boolean) ---------------------------------------------------------------------------- Message:System.Web.HttpException: Directory 'C:\Web Sites\My Site Foo - Main Site\Controls\InfoAdvice' does not exist. Failed to start monitoring file changes. at System.Web.FileChangesMonitor.FindDirectoryMonitor(String dir, Boolean addIfNotFound, Boolean throwOnError) at System.Web.FileChangesMonitor.StartMonitoringPath(String alias, FileChangeEventHandler callback, FileAttributesData& fad) at System.Web.Caching.CacheDependency.Init(Boolean isPublic, String[] filenamesArg, String[] cachekeysArg, CacheDependency dependency, DateTime utcStart) at System.Web.Caching.CacheDependency..ctor(Int32 dummy, String[] filenames, DateTime utcStart) at System.Web.Hosting.MapPathBasedVirtualPathProvider.GetCacheDependency(String virtualPath, IEnumerable virtualPathDependencies, DateTime utcStart) at System.Web.ResponseDependencyList.CreateCacheDependency(CacheDependencyType dependencyType, CacheDependency dependency) at System.Web.HttpResponse.CreateCacheDependencyForResponse(CacheDependency dependencyVary) at System.Web.Caching.OutputCacheModule.InsertResponse(HttpResponse response, HttpContext context, String keyRawResponse, HttpCachePolicySettings settings, CachedVary cachedVary, CachedRawResponse memoryRawResponse) at System.Web.Caching.OutputCacheModule.OnLeave(Object source, EventArgs eventArgs) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Ok .. so for some reason, the OutputCache wants a folder/file to be there? Well, i've had this site live for around 3 years and i'm pretty sure that the folders \Controls and \Controls\InfoAdvice doesn't exist on my production server. On my localhost, it sure does .. and contains a large list of ascx controls. But they don't exist on my live server. So ... what is going on here? Can anyone please help? Oh :) Before someone suggests I create those two folders and even stick a random file in those folders .. and have some random text in those random files .. i've done that and it doesn't seem to work, still :( Please Help !

  Read the article

• What is wrong with the following Fluent NHibernate Mapping ?

  - by ashraf

  Hi, I have 3 tables (Many to Many relationship) Resource {ResourceId, Description} Role {RoleId, Description} Permission {ResourceId, RoleId} I am trying to map above tables in fluent-nHibernate. This is what I am trying to do. var aResource = session.Get<Resource>(1); // 2 Roles associated (Role 1 and 2) var aRole = session.Get<Role>(1); aResource.Remove(aRole); // I try to delete just 1 role from permission. But the sql generated here is (which is wrong) Delete from Permission where ResourceId = 1 Insert into Permission (ResourceId, RoleId) values (1, 2); Instead of (right way) Delete from Permission where ResourceId = 1 and RoleId = 1 Why nHibernate behave like this? What wrong with the mapping? I even tried with Set instead of IList. Here is the full code. Entities public class Resource { public virtual string Description { get; set; } public virtual int ResourceId { get; set; } public virtual IList<Role> Roles { get; set; } public Resource() { Roles = new List<Role>(); } } public class Role { public virtual string Description { get; set; } public virtual int RoleId { get; set; } public virtual IList<Resource> Resources { get; set; } public Role() { Resources = new List<Resource>(); } } Mapping Here // Mapping .. public class ResourceMap : ClassMap<Resource> { public ResourceMap() { Id(x => x.ResourceId); Map(x => x.Description); HasManyToMany(x => x.Roles).Table("Permission"); } } public class RoleMap : ClassMap<Role> { public RoleMap() { Id(x => x.RoleId); Map(x => x.Description); HasManyToMany(x => x.Resources).Table("Permission"); } } Program static void Main(string[] args) { var factory = CreateSessionFactory(); using (var session = factory.OpenSession()) { using (var tran = session.BeginTransaction()) { var aResource = session.Get<Resource>(1); var aRole = session.Get<Role>(1); aResource.Remove(aRole); session.Save(a); session.Flush(); tran.Commit(); } } } private static ISessionFactory CreateSessionFactory() { return Fluently.Configure() .Database(MsSqlConfiguration.MsSql2008 .ConnectionString("server=(local);database=Store;Integrated Security=SSPI")) .Mappings(m => m.FluentMappings.AddFromAssemblyOf<Program>() .Conventions.Add<CustomForeignKeyConvention>()) .BuildSessionFactory(); } public class CustomForeignKeyConvention : ForeignKeyConvention { protected override string GetKeyName(FluentNHibernate.Member property, Type type) { return property == null ? type.Name + "Id" : property.Name + "Id"; } } Thanks, Ashraf.

  Read the article

• getting Error while set up the connection pool in jboss

  - by Yashwant Chavan

  Hi as per following Connection pool configuration facing some issue. Place a copy of mysql-connector-java-[version]-bin.jar in $JBOSS_HOME/server/all/lib. Then, follow the example configuration file named mysql-ds.xml in the $JBOSS_HOME/docs/examples/jca directory that comes with a JBoss binary installation. To activate your DataSource, place an xml file that follows the format of mysql-ds.xml in the deploy subdirectory in either $JBOSS_HOME/server/all, $JBOSS_HOME/server/default, or $JBOSS_HOME/server/[yourconfig] as appropriate. I am getting following error resource-ref: jdbc/buinessCaliberDb has no valid JNDI binding. Check the jboss-web/resource-ref. This is my mysql-ds.xml <datasources> <local-tx-datasource> <jndi-name>jdbc/buinessCaliberDb</jndi-name> <connection-url>jdbc:mysql:///BUSINESS</connection-url> <driver-class>com.mysql.jdbc.Driver</driver-class> <user-name>root</user-name> <password>password</password> <exception-sorter-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLExceptionSorter</exception-sorter-class-name> <!-- should only be used on drivers after 3.22.1 with "ping" support <valid-connection-checker-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLValidConnectionChecker</valid-connection-checker-class-name> --> <!-- sql to call when connection is created <new-connection-sql>some arbitrary sql</new-connection-sql> --> <!-- sql to call on an existing pooled connection when it is obtained from pool - MySQLValidConnectionChecker is preferred for newer drivers <check-valid-connection-sql>some arbitrary sql</check-valid-connection-sql> --> <!-- corresponding type-mapping in the standardjbosscmp-jdbc.xml (optional) --> <metadata> <type-mapping>mySQL</type-mapping> </metadata> </local-tx-datasource> </datasources> and this my web.xml entry <resource-ref> <description>DB Connection</description> <res-ref-name>jdbc/buinessCaliberDb</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> and this jboss-web.xml entry <jboss-web> <resource-ref> <description>DB Connection</description> <res-ref-name>jdbc/buinessCaliberDb</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> </jboss-web> Please help

  Read the article

• How do I configure permissions for a cluster share using Powershell on 2008?

  - by Andrew J. Brehm

  I have a cluster resource of type "file share" but when I try to configure the "security" parameter I get the following error (excerpt): Set-ClusterParameter : Parameter 'security' does not exist on the cluster object Using cluster.exe I get a better result, namely the usual nothing when the command worked. But when I check in Failover Cluster Manager the permissions have not changed. In Server 2003 the cluster.exe method worked. Any ideas? Update: Entire command and error. PS C:\> $resource=get-clusterresource testshare PS C:\> $resource Name State Group ResourceType ---- ----- ----- ------------ testshare Offline Test File Share PS C:\> $resource|set-clusterparameter security "domain\account,grant,f" Set-ClusterParameter : Parameter 'security' does not exist on the cluster object 'testshare'. If you are trying to upda te an existing parameter, please make sure the parameter name is specified correctly. You can check for the current par ameters by passing the .NET object received from the appropriate Get-Cluster* cmdlet to "| Get-ClusterParameter". If yo u are trying to update a common property on the cluster object, you should set the property directly on the .NET object received by the appropriate Get-Cluster* cmdlet. You can check for the current common properties by passing the .NET o bject received from the appropriate Get-Cluster* cmdlet to "| fl *". If you are trying to create a new unknown paramete r, please use -Create with this Set-ClusterParameter cmdlet. At line:1 char:31 + $resource|set-clusterparameter <<<< security "domain\account,grant,f" + CategoryInfo : NotSpecified: (:) [Set-ClusterParameter], ClusterCmdletException + FullyQualifiedErrorId : Set-ClusterParameter,Microsoft.FailoverClusters.PowerShell.SetClusterParameterCommand

  Read the article

• Entity Framework 4 and Velocity

  - by Feryt

  Hi. Did you ever used EF4 and Velocity(or other caching framework) together? I found this blog post Tracing and Caching EF.

  Read the article

• Adding OutputCache to an ASP.NET WebForm crashes my site :(

  - by Pure.Krome

  Hi folks, When I add either one of these ... <%@ OutputCache Duration="600" Location="Any" VaryByParam="*" %> or <%@ OutputCache CacheProfile="CmsArticlesListOrItem" %> (.. and this into the web.config file...) <caching> <outputCacheSettings> <outputCacheProfiles> <add name="CmsArticlesListOrItem" duration="600" varyByParam="*" /> </outputCacheProfiles> </outputCacheSettings> <sqlCacheDependency ........ ></sqlCacheDependency </caching> my page/site crashes with the following error:- Source: System.Web ---------------------------------------------------------------------------- TargetSite: System.Web.DirectoryMonitor FindDirectoryMonitor(System.String, Boolean, Boolean) ---------------------------------------------------------------------------- Message:System.Web.HttpException: Directory 'C:\Web Sites\My Site Foo - Main Site\Controls\InfoAdvice' does not exist. Failed to start monitoring file changes. at System.Web.FileChangesMonitor.FindDirectoryMonitor(String dir, Boolean addIfNotFound, Boolean throwOnError) at System.Web.FileChangesMonitor.StartMonitoringPath(String alias, FileChangeEventHandler callback, FileAttributesData& fad) at System.Web.Caching.CacheDependency.Init(Boolean isPublic, String[] filenamesArg, String[] cachekeysArg, CacheDependency dependency, DateTime utcStart) at System.Web.Caching.CacheDependency..ctor(Int32 dummy, String[] filenames, DateTime utcStart) at System.Web.Hosting.MapPathBasedVirtualPathProvider.GetCacheDependency(String virtualPath, IEnumerable virtualPathDependencies, DateTime utcStart) at System.Web.ResponseDependencyList.CreateCacheDependency(CacheDependencyType dependencyType, CacheDependency dependency) at System.Web.HttpResponse.CreateCacheDependencyForResponse(CacheDependency dependencyVary) at System.Web.Caching.OutputCacheModule.InsertResponse(HttpResponse response, HttpContext context, String keyRawResponse, HttpCachePolicySettings settings, CachedVary cachedVary, CachedRawResponse memoryRawResponse) at System.Web.Caching.OutputCacheModule.OnLeave(Object source, EventArgs eventArgs) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Ok .. so for some reason, the OutputCache wants a folder/file to be there? Well, i've had this site live for around 3 years and i'm pretty sure that the folders \Controls and \Controls\InfoAdvice doesn't exist on my production server. On my localhost, it sure does .. and contains a large list of ascx controls. But they don't exist on my live server. So ... what is going on here? Can anyone please help? Oh :) Before someone suggests I create those two folders and even stick a random file in those folders .. and have some random text in those random files .. i've done that and it doesn't seem to work, still :( Please Help !

  Read the article

• Sun Grid Engine (SGE) / limiting simultaneous array job sub-tasks

  - by wfaulk

  I am installing a Sun Grid Engine environment and I have a scheduler limit that I can't quite figure out how to implement. My users will create array jobs that have hundreds of sub-tasks. I would like to be able to limit those jobs to only running a set number of tasks at the same time, independent of other jobs. Like I might have one array job that I want to run 20 tasks at a time, and another I want to run 50 tasks at a time, and yet another that I'm fine running without limit. It seems like this ought to be doable, but I can't figure it out. There's a max_aj_instances configuration option, but that appears to apply globally to all array jobs. I can't see any way to use consumable resources, as I'd need a "complex attribute" that is per-job, and that feature doesn't seem to exist. It didn't look like resource quotas would work, but now I'm not so sure of that. It says "A resource quota set defines a maximum resource quota for a particular job request", but it's unclear if an array job's sub-tasks' resource requests will be aggregated for the purposes of the resource quota. I'm going to play with this, but hopefully someone already knows outright.

  Read the article

• How to cache render :json

  - by ash34

  Hi, I have a controller index action which returns json output. render :json => my_array.to_json What type of caching do I have to use here. Does 'page caching' make sense for this. Or do I have to do action caching like below caches_action :index thanks, ash

  Read the article

• How do you assign resources and keep begin, end and duration of a task intact?

  - by Random

  I have problems with assigning more than one resource to a group of tasks. The idea is simple, my tasks are in one group and are manually scheduled to particular begin and end dates. I want to assign more than one resource to keep task duration and dates (fixed duration) and increase work. For top level tasks it works fine but as long tasks are grouped, the duration of each is extended to reach group end date and work remains. For the problematic tasks, the Gantt chart looks like this: One resource attached (good) ( Task 1.1 ) ( Task 1.2 ) (Task 1.3) More than one resource attached (wrong) ( Task 1.1 )....................... ( Task 1.2 ).......... (Task 1.3) So for tasks like that, I want to have a fixed schedule and just increase work by adding resources that work in the same time, but sometimes MS Project does leveling to do resources work sequentialy.

  Read the article

• PHP cache header override

  - by Soyo

  I've been through over 100 answers here, lots to try, NOTHING working?? Have a PHP based site. I need caching OFF for all .php files EXCEPT A SELECT FEW. So, in .htaccess, I have the following: ExpiresActive On # Eliminate caching for certain dynamic files <FilesMatch "\.(php|cgi|pl)$"> ExpiresDefault A0 Header set Cache-Control "no-cache, no-store, must-revalidate, max-age=0, proxy-revalidate, no-transform" Header set Pragma "no-cache" </FilesMatch> Using Firebug, I see the following: Cache-Control no-cache, no-store, must-revalidate, max-age=0, proxy-revalidate, no-transform Connection Keep-Alive Content-Type text/html Date Sun, 02 Sep 2012 19:22:27 GMT Expires Sun, 02 Sep 2012 19:22:27 GMT Keep-Alive timeout=3, max=100 Pragma no-cache Server Apache Transfer-Encoding chunked X-Powered-By PHP/5.2.17 Hey, Looks great! BUT, I have a couple .php pages I need some very short caching on. I thought the simple answer was having this added to the very top of each php page in which I want caching enabled: <?php header("Cache-Control: max-age=360"); ?> Nope. Then I tried various versions of the above. Nope. Then I tried meta http-equiv variations. Nope. Then I tried variations of the .htaccess code along with the above variations, such as limiting it to: # Eliminate caching for certain dynamic files <FilesMatch "\.(php|cgi|pl)$"> Header set Cache-Control "no-cache, max-age=0" </FilesMatch> Nope. It seems nothing I do will allow a single .php to be cache enabled with the .htaccess code in place, short of removing the statements from the .htaccess file altogether. Where am I going wrong? What do I have to do to get individual php pages to be cacheable while the rest remain off?? Thank you for any thoughts.

  Read the article

• ASP.NET GZip Encoding Caveats

  - by Rick Strahl

  GZip encoding in ASP.NET is pretty easy to accomplish using the built-in GZipStream and DeflateStream classes and applying them to the Response.Filter property.  While applying GZip and Deflate behavior is pretty easy there are a few caveats that you have watch out for as I found out today for myself with an application that was throwing up some garbage data. But before looking at caveats let’s review GZip implementation for ASP.NET. ASP.NET GZip/Deflate Basics Response filters basically are applied to the Response.OutputStream and transform it as data is written to it through the ASP.NET Response object. So a Response.Write eventually gets written into the output stream which if a filter is also written through the filter stream’s interface. To perform the actual GZip (and Deflate) encoding typically used by Web pages .NET includes the GZipStream and DeflateStream stream classes which can be readily assigned to the Repsonse.OutputStream. With these two stream classes in place it’s almost trivially easy to create a couple of reusable methods that allow you to compress your HTTP output. In my standard WebUtils utility class (from the West Wind West Wind Web Toolkit) created two static utility methods – IsGZipSupported and GZipEncodePage – that check whether the client supports GZip encoding and then actually encodes the current output (note that although the method includes ‘Page’ in its name this code will work with any ASP.NET output). /// <summary> /// Determines if GZip is supported /// </summary> /// <returns></returns> public static bool IsGZipSupported() { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (!string.IsNullOrEmpty(AcceptEncoding) && (AcceptEncoding.Contains("gzip") || AcceptEncoding.Contains("deflate"))) return true; return false; } /// <summary> /// Sets up the current page or handler to use GZip through a Response.Filter /// IMPORTANT: /// You have to call this method before any output is generated! /// </summary> public static void GZipEncodePage() { HttpResponse Response = HttpContext.Current.Response; if (IsGZipSupported()) { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (AcceptEncoding.Contains("deflate")) { Response.Filter = new System.IO.Compression.DeflateStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "deflate"); } else { Response.Filter = new System.IO.Compression.GZipStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "gzip"); } } } As you can see the actual assignment of the Filter is as simple as: Response.Filter = new DeflateStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); which applies the filter to the OutputStream. You also need to ensure that your response reflects the new GZip or Deflate encoding and ensure that any pages that are cached in Proxy servers can differentiate between pages that were encoded with the various different encodings (or no encoding). To use this utility function now is trivially easy: In any ASP.NET code that wants to compress its Response output you simply use: protected void Page_Load(object sender, EventArgs e) { WebUtils.GZipEncodePage(); Entry = WebLogFactory.GetEntry(); var entries = Entry.GetLastEntries(App.Configuration.ShowEntryCount, "pk,Title,SafeTitle,Body,Entered,Feedback,Location,ShowTopAd", "TEntries"); if (entries == null) throw new ApplicationException("Couldn't load WebLog Entries: " + Entry.ErrorMessage); this.repEntries.DataSource = entries; this.repEntries.DataBind(); } Here I use an ASP.NET page, but the above WebUtils.GZipEncode() method call will work in any ASP.NET application type including HTTP Handlers. The only requirement is that the filter needs to be applied before any other output is sent to the OutputStream. For example, in my CallbackHandler service implementation by default output over a certain size is GZip encoded. The output that is generated is JSON or XML and if the output is over 5k in size I apply WebUtils.GZipEncode(): if (sbOutput.Length > GZIP_ENCODE_TRESHOLD) WebUtils.GZipEncodePage(); Response.ContentType = ControlResources.STR_JsonContentType; HttpContext.Current.Response.Write(sbOutput.ToString()); Ok, so you probably get the idea: Encoding GZip/Deflate content is pretty easy. Hold on there Hoss –Watch your Caching Or is it? There are a few caveats that you need to watch out for when dealing with GZip content. The fist issue is that you need to deal with the fact that some clients don’t support GZip or Deflate content. Most modern browsers support it, but if you have a programmatic Http client accessing your content GZip/Deflate support is by no means guaranteed. For example, WinInet Http clients don’t support GZip out of the box – it has to be explicitly implemented. Other low level HTTP clients on other platforms too don’t support GZip out of the box. The problem is that your application, your Web Server and Proxy Servers on the Internet might be caching your generated content. If you return content with GZip once and then again without, either caching is not applied or worse the wrong type of content is returned back to the client from a cache or proxy. The result is an unreadable response for *some clients* which is also very hard to debug and fix once in production. You already saw the issue of Proxy servers addressed in the GZipEncodePage() function: // Allow proxy servers to cache encoded and unencoded versions separately Response.AppendHeader("Vary", "Content-Encoding"); This ensures that any Proxy servers also check for the Content-Encoding HTTP Header to cache their content – not just the URL. The same thing applies if you do OutputCaching in your own ASP.NET code. If you generate output for GZip on an OutputCached page the GZipped content will be cached (either by ASP.NET’s cache or in some cases by the IIS Kernel Cache). But what if the next client doesn’t support GZip? She’ll get served a cached GZip page that won’t decode and she’ll get a page full of garbage. Wholly undesirable. To fix this you need to add some custom OutputCache rules by way of the GetVaryByCustom() HttpApplication method in your global_ASAX file: public override string GetVaryByCustomString(HttpContext context, string custom) { // Override Caching for compression if (custom == "GZIP") { string acceptEncoding = HttpContext.Current.Response.Headers["Content-Encoding"]; if (string.IsNullOrEmpty(acceptEncoding)) return ""; else if (acceptEncoding.Contains("gzip")) return "GZIP"; else if (acceptEncoding.Contains("deflate")) return "DEFLATE"; return ""; } return base.GetVaryByCustomString(context, custom); } In a page that use Output caching you then specify: <%@ OutputCache Duration="180" VaryByParam="none" VaryByCustom="GZIP" %> To use that custom rule. It’s all Fun and Games until ASP.NET throws an Error Ok, so you’re up and running with GZip, you have your caching squared away and your pages that you are applying it to are jamming along. Then BOOM, something strange happens and you get a lovely garbled page that look like this: Lovely isn’t it? What’s happened here is that I have WebUtils.GZipEncode() applied to my page, but there’s an error in the page. The error falls back to the ASP.NET error handler and the error handler removes all existing output (good) and removes all the custom HTTP headers I’ve set manually (usually good, but very bad here). Since I applied the Response.Filter (via GZipEncode) the output is now GZip encoded, but ASP.NET has removed my Content-Encoding header, so the browser receives the GZip encoded content without a notification that it is encoded as GZip. The result is binary output. Here’s what Fiddler says about the raw HTTP header output when an error occurs when GZip encoding was applied: HTTP/1.1 500 Internal Server Error Cache-Control: private Content-Type: text/html; charset=utf-8 Date: Sat, 30 Apr 2011 22:21:08 GMT Content-Length: 2138 Connection: close ?`I?%&/m?{J?J??t??` … binary output striped here Notice: no Content-Encoding header and that’s why we’re seeing this garbage. ASP.NET has stripped the Content-Encoding header but left our filter intact. So how do we fix this? In my applications I typically have a global Application_Error handler set up and in this case I’ve been using that. One thing that you can do in the Application_Error handler is explicitly clear out the Response.Filter and set it to null at the top: protected void Application_Error(object sender, EventArgs e) { // Remove any special filtering especially GZip filtering Response.Filter = null; … } And voila I get my Yellow Screen of Death or my custom generated error output back via uncompressed content. BTW, the same is true for Page level errors handled in Page_Error or ASP.NET MVC Error handling methods in a controller. Another and possibly even better solution is to check whether a filter is attached just before the headers are sent to the client as pointed out by Adam Schroeder in the comments: protected void Application_PreSendRequestHeaders() { // ensure that if GZip/Deflate Encoding is applied that headers are set // also works when error occurs if filters are still active HttpResponse response = HttpContext.Current.Response; if (response.Filter is GZipStream && response.Headers["Content-encoding"] != "gzip") response.AppendHeader("Content-encoding", "gzip"); else if (response.Filter is DeflateStream && response.Headers["Content-encoding"] != "deflate") response.AppendHeader("Content-encoding", "deflate"); } This uses the Application_PreSendRequestHeaders() pipeline event to check for compression encoding in a filter and adjusts the content accordingly. This is actually a better solution since this is generic – it’ll work regardless of how the content is cleaned up. For example, an error Response.Redirect() or short error display might get changed and the filter not cleared and this code actually handles that. Sweet, thanks Adam. It’s unfortunate that ASP.NET doesn’t natively clear out Response.Filters when an error occurs just as it clears the Response and Headers. I can’t see where leaving a Filter in place in an error situation would make any sense, but hey - this is what it is and it’s easy enough to fix as long as you know where to look. Riiiight! IIS and GZip I should also mention that IIS 7 includes good support for compression natively. If you can defer encoding to let IIS perform it for you rather than doing it in your code by all means you should do it! Especially any static or semi-dynamic content that can be made static should be using IIS built-in compression. Dynamic caching is also supported but is a bit more tricky to judge in terms of performance and footprint. John Forsyth has a great article on the benefits and drawbacks of IIS 7 compression which gives some detailed performance comparisons and impact reviews. I’ll post another entry next with some more info on IIS compression since information on it seems to be a bit hard to come by. Related Content Built-in GZip/Deflate Compression in IIS 7.x HttpWebRequest and GZip Responses © Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET   IIS7  

  Read the article

• Translating with Google Translate without API and C# Code

  - by Rick Strahl

  Some time back I created a data base driven ASP.NET Resource Provider along with some tools that make it easy to edit ASP.NET resources interactively in a Web application. One of the small helper features of the interactive resource admin tool is the ability to do simple translations using both Google Translate and Babelfish. Here's what this looks like in the resource administration form: When a resource is displayed, the user can click a Translate button and it will show the current resource text and then lets you set the source and target languages to translate. The Go button fires the translation for both Google and Babelfish and displays them - pressing use then changes the language of the resource to the target language and sets the resource value to the newly translated value. It's a nice and quick way to get a quick translation going. Ch… Ch… Changes Originally, both implementations basically did some screen scraping of the interactive Web sites and retrieved translated text out of result HTML. Screen scraping is always kind of an iffy proposition as content can be changed easily, but surprisingly that code worked for many years without fail. Recently however, Google at least changed their input pages to use AJAX callbacks and the page updates no longer worked the same way. End result: The Google translate code was broken. Now, Google does have an official API that you can access, but the API is being deprecated and you actually need to have an API key. Since I have public samples that people can download the API key is an issue if I want people to have the samples work out of the box - the only way I could even do this is by sharing my API key (not allowed).   However, after a bit of spelunking and playing around with the public site however I found that Google's interactive translate page actually makes callbacks using plain public access without an API key. By intercepting some of those AJAX calls and calling them directly from code I was able to get translation back up and working with minimal fuss, by parsing out the JSON these AJAX calls return. I don't think this particular Warning: This is hacky code, but after a fair bit of testing I found this to work very well with all sorts of languages and accented and escaped text etc. as long as you stick to small blocks of translated text. I thought I'd share it in case anybody else had been relying on a screen scraping mechanism like I did and needed a non-API based replacement. Here's the code: /// <summary> /// Translates a string into another language using Google's translate API JSON calls. /// <seealso>Class TranslationServices</seealso> /// </summary> /// <param name="Text">Text to translate. Should be a single word or sentence.</param> /// <param name="FromCulture"> /// Two letter culture (en of en-us, fr of fr-ca, de of de-ch) /// </param> /// <param name="ToCulture"> /// Two letter culture (as for FromCulture) /// </param> public string TranslateGoogle(string text, string fromCulture, string toCulture) { fromCulture = fromCulture.ToLower(); toCulture = toCulture.ToLower(); // normalize the culture in case something like en-us was passed // retrieve only en since Google doesn't support sub-locales string[] tokens = fromCulture.Split('-'); if (tokens.Length > 1) fromCulture = tokens[0]; // normalize ToCulture tokens = toCulture.Split('-'); if (tokens.Length > 1) toCulture = tokens[0]; string url = string.Format(@"http://translate.google.com/translate_a/t?client=j&text={0}&hl=en&sl={1}&tl={2}", HttpUtility.UrlEncode(text),fromCulture,toCulture); // Retrieve Translation with HTTP GET call string html = null; try { WebClient web = new WebClient(); // MUST add a known browser user agent or else response encoding doen't return UTF-8 (WTF Google?) web.Headers.Add(HttpRequestHeader.UserAgent, "Mozilla/5.0"); web.Headers.Add(HttpRequestHeader.AcceptCharset, "UTF-8"); // Make sure we have response encoding to UTF-8 web.Encoding = Encoding.UTF8; html = web.DownloadString(url); } catch (Exception ex) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.ConnectionFailed + ": " + ex.GetBaseException().Message; return null; } // Extract out trans":"...[Extracted]...","from the JSON string string result = Regex.Match(html, "trans\":(\".*?\"),\"", RegexOptions.IgnoreCase).Groups[1].Value; if (string.IsNullOrEmpty(result)) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.InvalidSearchResult; return null; } //return WebUtils.DecodeJsString(result); // Result is a JavaScript string so we need to deserialize it properly JavaScriptSerializer ser = new JavaScriptSerializer(); return ser.Deserialize(result, typeof(string)) as string; } To use the code is straightforward enough - simply provide a string to translate and a pair of two letter source and target languages: string result = service.TranslateGoogle("Life is great and one is spoiled when it goes on and on and on", "en", "de"); TestContext.WriteLine(result); How it works The code to translate is fairly straightforward. It basically uses the URL I snagged from the Google Translate Web Page slightly changed to return a JSON result (&client=j) instead of the funky nested PHP style JSON array that the default returns. The JSON result returned looks like this: {"sentences":[{"trans":"Das Leben ist großartig und man wird verwöhnt, wenn es weiter und weiter und weiter geht","orig":"Life is great and one is spoiled when it goes on and on and on","translit":"","src_translit":""}],"src":"en","server_time":24} I use WebClient to make an HTTP GET call to retrieve the JSON data and strip out part of the full JSON response that contains the actual translated text. Since this is a JSON response I need to deserialize the JSON string in case it's encoded (for upper/lower ASCII chars or quotes etc.). Couple of odd things to note in this code: First note that a valid user agent string must be passed (or at least one starting with a common browser identification - I use Mozilla/5.0). Without this Google doesn't encode the result with UTF-8, but instead uses a ISO encoding that .NET can't easily decode. Google seems to ignore the character set header and use the user agent instead which is - odd to say the least. The other is that the code returns a full JSON response. Rather than use the full response and decode it into a custom type that matches Google's result object, I just strip out the translated text. Yeah I know that's hacky but avoids an extra type and firing up the JavaScript deserializer. My internal version uses a small DecodeJsString() method to decode Javascript without the overhead of a full JSON parser. It's obviously not rocket science but as mentioned above what's nice about it is that it works without an Google API key. I can't vouch on how many translates you can do before there are cut offs but in my limited testing running a few stress tests on a Web server under load I didn't run into any problems. Limitations There are some restrictions with this: It only works on single words or single sentences - multiple sentences (delimited by .) are cut off at the ".". There is also a length limitation which appears to happen at around 220 characters or so. While that may not sound  like much for typical word or phrase translations this this is plenty of length. Use with a grain of salt - Google seems to be trying to limit their exposure to usage of the Translate APIs so this code might break in the future, but for now at least it works. FWIW, I also found that Google's translation is not as good as Babelfish, especially for contextual content like sentences. Google is faster, but Babelfish tends to give better translations. This is why in my translation tool I show both Google and Babelfish values retrieved. You can check out the code for this in the West Wind West Wind Web Toolkit's TranslationService.cs file which contains both the Google and Babelfish translation code pieces. Ironically the Babelfish code has been working forever using screen scraping and continues to work just fine today. I think it's a good idea to have multiple translation providers in case one is down or changes its format, hence the dual display in my translation form above. I hope this has been helpful to some of you - I've actually had many small uses for this code in a number of applications and it's sweet to have a simple routine that performs these operations for me easily. Resources Live Localization Sample Localization Resource Provider Administration form that includes options to translate text using Google and Babelfish interactively. TranslationService.cs The full source code in the West Wind West Wind Web Toolkit's Globalization library that contains the translation code. © Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp  HTTP   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• ASP.NET MVC localization DisplayNameAttribute alternatives: a good way

  - by Brian Schroer

  The ASP.NET MVC HTML helper methods like .LabelFor and .EditorFor use model metadata to autogenerate labels for model properties. By default it uses the property name for the label text, but if that’s not appropriate, you can use a DisplayName attribute to specify the desired label text: [DisplayName("Remember me?")] public bool RememberMe { get; set; } I’m working on a multi-language web site, so the labels need to be localized. I tried pointing the DisplayName attribute to a resource string: [DisplayName(MyResource.RememberMe)] public bool RememberMe { get; set; } …but that results in the compiler error "An attribute argument must be a constant expression, typeof expression or array creation expression of an attribute parameter type”. I got around this by creating a custom LocalizedDisplayNameAttribute class that inherits from DisplayNameAttribute: 1: public class LocalizedDisplayNameAttribute : DisplayNameAttribute 2: { 3: public LocalizedDisplayNameAttribute(string resourceKey) 4: { 5: ResourceKey = resourceKey; 6: } 7:   8: public override string DisplayName 9: { 10: get 11: { 12: string displayName = MyResource.ResourceManager.GetString(ResourceKey); 13:   14: return string.IsNullOrEmpty(displayName) 15: ? string.Format("[[{0}]]", ResourceKey) 16: : displayName; 17: } 18: } 19:   20: private string ResourceKey { get; set; } 21: } Instead of a display string, it takes a constructor argument of a resource key. The DisplayName method is overridden to get the display string from the resource file (line 12). If the key is not found, I return a formatted string containing the key (e.g. “[[RememberMe]]”) so I can tell by looking at my web pages which resource keys I haven’t defined yet (line 15). The usage of my custom attribute in the model looks like this: [LocalizedDisplayName("RememberMe")] public bool RememberMe { get; set; } That was my first attempt at localized display names, and it’s a technique that I still use in some cases, but in my next post I’ll talk about the method that I now prefer, a custom DataAnnotationsModelMetadataProvider class…

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >