Search Results

Search found 6164 results on 247 pages for 'sd card'.

Page 76/247 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• Ubuntu 11.10 very slow compared to Windows

  - by Patrick

  I'm new to Ubuntu/linux. Since my PC is very old and not very fast with Windows 7, I decided to give Ubuntu a try, so I downloaded and installed Ubuntu 11.10 today. When I first started it, I had bad 800x600 resolution and it was very slow and annoying. So I installed a driver for my graphic card and now everything looks very nice (1280x1024).But I think it's still far slower than Windows 7. I tried to run in Ubuntu like a few people suggested on the forum but if I log in I get a black screen saying something like "this video mode cannot be displayed". I get that same screen when booting Ubuntu btw, but after about 15 seconds it disappears and just starts Ubuntu. I also installed other drivers for my graphic card but everything stayed the same. I noticed that i.e. when I open Firefox or system settings it takes about 5 seconds till it opens (while Windows 7 takes under 1 second to start i.e. Chrome) and when I do this my CPU usage gets to 100% for a short time. Computer specs: Memory: 2GB RAM Processor: Intel Pentium 4 2.8GHz Graphics Card: Nvidia GeForce 6800 400MHz. I read on various forums that 11.04 works flawless on many PCs, where 11.10 is very slow. Should I install 11.04 or could anybody help me with this problem?

  Read the article

• There's Not an App for That (Yet)

  - by Mark Hesse

  With an earlier-than-normal departure this morning to avoid the stalemate known as traffic congestion, I suddenly realized what I had failed to grab on my way out the door...  my company ID badge.  Unfortunately, at the time of my epiphany, I was far enough into commuter no-man's land where turning back would completely negate my early departure and increase my overall drive time exponentially.  Not being one to retrace my steps, I decided to press on. Upon arrival at the office and with an hour to go before a security guard would be on duty, I started thinking about the number of times I had forgotten my ID vs. the number of times I had forgotten my phone.  While rare on both accounts, my ID was most likely the missing artifact. I then wondered why there isn't an app for my smartphone that allows me to verify my credentials with my employer and then, provided with a secure token for the day, have the ability to access my building's card entry system.  On many levels, this seems much more secure than an ID card which can be lost, stolen or even forged and then used simply by tailgating into and around buildings at facilities where card scanning can generally be avoided.   As it turns out, another building on the campus has 24 x 7 guard coverage, so I was able to gain access in a relatively short time and secure a temporary ID badge.  Once inside and online, a quick internet search on the subject of smartphone badge access shows that efforts are underway to do exactly what I was thinking needed to be done. Having not spent any time studying about the technology, I discovered that it relies on Near Field Communications (NFC) enabled smartphones (of which, mine does not provide).  The only other option would require modifications to the security infrastructure to support alternative authentication technologies, such as barcode readers, which would be extremely costly to implement. For now, my best option is to put my corporate ID under my car keys... 

  Read the article

• ubuntu 13.10 liveboot/installer loads dots, then does nothing

  - by user200245

  Problem: When I load an Ubuntu 13.10 (64-bit) live USB / installer on my laptop, the purple Ubuntu screen with the white dots appears, the dots turn orange (indicating its loading), then after a few seconds the screen turns completely black and nothing else happens. I can not install Ubuntu 13.10 on this computer. What I've Tried: I've re-downloaded the .iso file from canonical. I've burned the .iso to the USB using the default linux usb image writer, and the Windows programs YUMI and Linux Live USB Creator; same thing happens each time. Yes, I'm sure my computer is 64 bit. I'm currently running Linux Mint 15 on it, which runs perfectly. It's a Sager NP7330 / Clevo w230st. extra info A few months I installed Ubuntu 13.04 on this machine, which installed perfectly. Normally I'd install that then dist-upgrade to 13.10, HOWEVER this computer is only a few months old and the wireless/network drivers for my network card were not implemented until kernel 3.11 (which comes w ith 13.10). I tried manually downloading kernel 3.11 and installing it (on 13.04), however the wireless card nor ethernet card still did work with Ubuntu 13.04. So my only real hope is to get 13.10 working. Does anyone know what's up with this?

  Read the article

• Will Ubuntu work out on my mother's computer?

  - by PleaseStand

  My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. Recently, a relative brought up a newer computer; it ran Windows XP. Unfortunately, the hard drive failed soon afterward, forcing me to reinstall the operating system. Not having the original Windows disc or product key led me to consider Ubuntu Linux. Will it work for mom? Is the hardware compatible? (Check the history of this question for the full specifications.) Would Ubuntu/Xubuntu suffice, or would I be better off buying a new copy of Windows? Is her card game (Hoyle Card Games 3) likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, is running Windows 98 on VirtualBox an option on such an old computer? Are there any equally good card games for Linux? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? Is it possible to use a serial mouse?

  Read the article

• Oracle Open World 2012?????

  - by Liu Maclean(???)

  Oracle Open World 2012?????: ???.. Oracle OpenWorld 2012 sessions????:Search Content Catalog for Oracle OpenWorld 2012 sessions ?????????session??? Open World 2012??: Larry ??Exadata X3 OOW 2012???Exadata X3,?? X3-2 ?Expansion Rack X3-2?X3-8 Exadata X3????:http://www.oracle.com/us/products/database/exadata/overview/index.html  ORACLE EXADATA Database MACHINE X3-8 sheetORACLE EXADATA Database MACHINE X3-2 sheet Exadata X3-2???????: X3-2?compute db node?????????8?Intel Xeon E5-2690??? ??????????12????16?,???33%????? ???96GB???128GB,????256GB ??????????50% X3-2 cell node??????????????Intel Xeon ??????flash card flash card??????4?,??flash card?????????40%? ???X3-2???22.4TB?flash ,??????flash????????????????????,???10????? CPU???6?,????????Intel Xeon model ????????X2-2??,???600GB???????3TB?????? ??Exadata X3-2?????????,??????????1/4?????,1/8????????????????? Exadata X3-8???????: X3-8???X2-8?????,???X3-8??????????X3-2??,??X3-8?????22.4TB?????? ???CEO??  Engineered to Work Together OOW????? Oracle Open World 2012 ????? Open World 2012 ??:http://www.oracle.com/openworld/index.htmlOpen World 2012 ????:http://www.oracle.com/openworld/register/packages/index.html ??: Sept. 30 – Oct. 4, 2012 9?30?? 10?4? ??:Moscone Center, San Francisco (747 Howard Street, San Francisco, California 94103). ?????Mark Hurd??OOW 2012: How big is oow OOW 2012?????????: Focus On Database Technologies Focus On Real Application Clusters Focus On Exadata Focus On Oracle Database Appliance Focus On Oracle Database Application Development Focus On Oracle Database Security Focus On Big Data Focus On Data Warehousing Focus On High Availability Focus On Oracle Enterprise Manager Cloud Control 12c (and Private Cloud) Focus On Oracle Spatial and Graph Focus On Oracle Database Utilities Focus On Oracle Database Upgrade Focus On Oracle Database Private Cloud Focus On .Net Focus On Oracle Database on Windows Focus On Engineered Systems Focus On Sunday Users Forum

  Read the article

• How can I install Ubuntu's 10.10 kernel I Ubuntu 12.10?

  - by user103533

  I did use Ubuntu 10.10 for a long time, and now I replaced it with Ubuntu 12.10, every thing works great, but I do have one little problem, which is with my wireless card. On Ubuntu 10.10, it worked PERFECTLY, and it even worked better than in windows 7, so I was very happy with Ubuntu 10.10, but, like I said, after installing 12.10, my wireless card doesn't work any more, so I heard that KERNELS are the reason for that. Are kernels the reason for my wireless not working now? If yes then please teach me how to remove my current kernels and install 10.10 kernels. I went to -Additional Drivers- and i found something very weird i took picture and this is what it look like "apply changes" Button NOT active so i can't install driver :( anyway... my Wireless card is WL-138g v2 (remember on Ubuntu 10.10 it was WORKING 100% normally and FREE i did NOT pay for it driver) so... now what shall i do ? it is saying in picture // Using Non-Free firmware for linux kernel drivers from linux-firmware-nonfree (proprietary) // BTW i did "rfkill list" but NO-thing appear under that command.

  Read the article

• How should VertexBuffers be used with Multiple Monitors in DirectX 9

  - by Joshua C

  I am currently using DirectX 9 on a machine with two GPUs and three monitors. I am currently trying to draw a triangle on each monitor using vertexbuffers; A directx helloworld with multiple monitors if you will. I am familiar with some DirectX coding, but new to multiple monitor DirectX coding. I may be going about this the wrong way, so please do correct me if I'm doing something wrong. I have created a Direct3D Device for each enumerated adapter sharing the same Form handle. This allows me to successfully use all three monitors in full-screen mode. For Each Adapter In Direct3D.Adapters Dim PresentParameters As New PresentParameters 'Setup PresentParameters PresentParameters.Windowed = False PresentParameters.DeviceWindowHandle = MainForm.Handle Dim Device as New Device(Direct3D, Adapter.Adapter, DeviceType.Hardware, PresentParameters.DeviceWindowHandle, CreateFlags.HardwareVertexProcessing, PresentParameters) Device.SetRenderState(RenderState.Lighting, False) Devices.Add(Device) Next I can also draw text to each device successfully using a different Font for each Device. When I render a triangle using a different VertexBuffer for each Device, only two monitors display the triangle. One of the two monitors on the same GPU, and the monitor on it's own GPU display properly. VertexBuffer = New VertexBuffer(Device, 4 * Marshal.SizeOf(GetType(ColoredVertex)), Usage.WriteOnly, VertexFormat.None, Pool.Managed) Dim Verts = VertexBuffer.Lock(0, 0, LockFlags.None) Verts.WriteRange({ New ColoredVertex(-.5, -.5, 1, ForeColor), New ColoredVertex(0, .5, 1, ForeColor), New ColoredVertex(.5, -.5, 1, ForeColor) }) VertexBuffer.Unlock() VertexDeclaration = New VertexDeclaration(Device, { New VertexElement(0, 0, DeclarationType.Float3, DeclarationMethod.Default, DeclarationUsage.Position, 0), New VertexElement(0, 12, DeclarationType.Color, DeclarationMethod.Default, DeclarationUsage.Color, 0), VertexElement.VertexDeclarationEnd }) Render Code: Device.SetStreamSource(0, VertexBuffer, 0, Marshal.SizeOf(GetType(ColoredVertex))) Device.VertexDeclaration = VertexDeclaration Device.DrawPrimitives(PrimitiveType.TriangleList, 0, 1) I have to assume the fact that they share the same physical card comes into play. Should I use multiple buffers on the same card, and if so, how? Or what is the way I should access the VertexBuffer across Devices? Another thought I had was the non working monitor acts like there are no lights. Is turning off lighting on each device on the same card causing issues somehow?

  Read the article

• Why does my laptop resume immediately after suspend?

  - by Igor Zinov'yev

  I seem to be having some problem with suspend mode. Every time I try to suspend my laptop, it just locks the screen. Or maybe it successfully suspends just to resume only an instant after. What could cause such a behaviour? I'm running 32-bit Ubuntu 12.04 with the 3.2.0-25 kernel on a HP dv5-1178er Pavilion laptop (Intel Core 2 Duo). Here are the relevant log sections: kern.log: Jun 1 10:42:21 igor-laptop kernel: [ 2225.131171] PM: Syncing filesystems ... done. Jun 1 10:42:21 igor-laptop kernel: [ 2225.141222] PM: Preparing system for mem sleep Jun 1 10:42:21 igor-laptop kernel: [ 2225.141239] Freezing user space processes ... (elapsed 0.01 seconds) done. Jun 1 10:42:21 igor-laptop kernel: [ 2225.156171] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Jun 1 10:42:21 igor-laptop kernel: [ 2225.172139] PM: Entering mem sleep Jun 1 10:42:21 igor-laptop kernel: [ 2225.172169] Suspending console(s) (use no_console_suspend to debug) Jun 1 10:42:21 igor-laptop kernel: [ 2225.172895] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 1 10:42:21 igor-laptop kernel: [ 2225.181767] sd 0:0:0:0: [sda] Stopping disk Jun 1 10:42:21 igor-laptop kernel: [ 2225.251089] ene_ir 00:0a: wake-up capability enabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.251115] i8042 aux 00:09: wake-up capability disabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.251133] i8042 kbd 00:08: wake-up capability enabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.251286] jmb38x_ms 0000:06:00.3: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.252491] sdhci-pci 0000:06:00.1: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.264130] uhci_hcd 0000:00:1d.2: PCI INT D disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.264142] uhci_hcd 0000:00:1d.1: PCI INT B disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.264325] uhci_hcd 0000:00:1a.1: PCI INT B disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.288059] uhci_hcd 0000:00:1a.0: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.288097] uhci_hcd 0000:00:1d.3: PCI INT C disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.288135] uhci_hcd 0000:00:1d.0: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.316051] ehci_hcd 0000:00:1d.7: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.316068] ehci_hcd 0000:00:1a.7: PCI INT D disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.522872] PM: suspend of drv:sd dev:0:0:0:0 complete after 349.979 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522901] PM: suspend of drv:scsi dev:target0:0:0 complete after 349.955 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522927] PM: suspend of drv:scsi dev:host0 complete after 272.260 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522969] ahci 0000:00:1f.2: BIOS update required for suspend/resume Jun 1 10:42:21 igor-laptop kernel: [ 2225.522976] pci_legacy_suspend(): ahci_pci_device_suspend+0x0/0x80 returns -5 Jun 1 10:42:21 igor-laptop kernel: [ 2225.522981] pm_op(): pci_pm_suspend+0x0/0x110 returns -5 Jun 1 10:42:21 igor-laptop kernel: [ 2225.522984] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 258.932 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522987] PM: Device 0000:00:1f.2 failed to suspend async: error -5 Jun 1 10:42:21 igor-laptop kernel: [ 2225.576228] snd_hda_intel 0000:00:1b.0: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.576270] ACPI handle has no context! Jun 1 10:42:21 igor-laptop kernel: [ 2225.592136] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 327.889 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.592206] PM: Some devices failed to suspend Jun 1 10:42:21 igor-laptop kernel: [ 2225.592291] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592298] uhci_hcd 0000:00:1a.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592325] usb usb3: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592339] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592345] uhci_hcd 0000:00:1a.1: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592371] usb usb4: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592387] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592395] ehci_hcd 0000:00:1a.7: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592843] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592851] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592854] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592863] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592878] usb usb5: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592892] usb usb6: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592895] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592903] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592906] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592915] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592930] usb usb7: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592946] usb usb8: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592949] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592957] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592963] pci 0000:00:1e.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.597106] sd 0:0:0:0: [sda] Starting disk Jun 1 10:42:21 igor-laptop kernel: [ 2225.608138] snd_hda_intel 0000:00:1b.0: BAR 0: set to [mem 0xdf300000-0xdf303fff 64bit] (PCI address [0xdf300000-0xdf303fff]) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608180] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608233] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608248] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608299] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Jun 1 10:42:21 igor-laptop kernel: [ 2225.608313] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.608420] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X Jun 1 10:42:21 igor-laptop kernel: [ 2225.612095] firewire_ohci 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) Jun 1 10:42:21 igor-laptop kernel: [ 2225.612181] sdhci-pci 0000:06:00.1: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) Jun 1 10:42:21 igor-laptop kernel: [ 2225.612211] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.612225] sdhci-pci 0000:06:00.1: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.612296] jmb38x_ms 0000:06:00.3: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) Jun 1 10:42:21 igor-laptop kernel: [ 2225.612326] jmb38x_ms 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.612332] jmb38x_ms 0000:06:00.3: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.699170] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 101.965 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.699179] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 101.932 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.699186] PM: resume of drv: dev:ep_00 complete after 101.917 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.699197] PM: resume of drv: dev:ep_83 complete after 101.972 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716148] PM: resume of drv:hub dev:3-0:1.0 complete after 119.543 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716155] PM: resume of drv: dev:ep_00 complete after 119.544 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716161] PM: resume of drv:hub dev:5-0:1.0 complete after 119.420 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716168] PM: resume of drv: dev:ep_00 complete after 119.381 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716174] PM: resume of drv:hub dev:8-0:1.0 complete after 119.141 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716181] PM: resume of drv: dev:ep_00 complete after 119.104 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716186] PM: resume of drv: dev:ep_81 complete after 119.579 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716191] PM: resume of drv: dev:ep_81 complete after 119.427 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716197] PM: resume of drv: dev:ep_81 complete after 119.143 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.747148] firewire_core: skipped bus generations, destroying all nodes Jun 1 10:42:21 igor-laptop kernel: [ 2225.776093] PM: resume of drv:hp_accel dev:HPQ0004:00 complete after 167.225 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.777243] i8042 kbd 00:08: wake-up capability disabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.777278] ene_ir 00:0a: wake-up capability disabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.820100] PM: resume of drv:hub dev:4-0:1.0 complete after 223.436 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820115] PM: resume of drv: dev:ep_00 complete after 223.444 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820123] PM: resume of drv: dev:ep_81 complete after 223.456 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820206] PM: resume of drv:hub dev:7-0:1.0 complete after 223.266 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820221] PM: resume of drv: dev:ep_81 complete after 223.260 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820238] PM: resume of drv: dev:ep_00 complete after 223.255 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820295] PM: resume of drv:hub dev:6-0:1.0 complete after 223.453 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820302] PM: resume of drv: dev:ep_00 complete after 223.415 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820321] PM: resume of drv: dev:ep_81 complete after 223.457 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.932108] usb 4-2: reset full-speed USB device number 2 using uhci_hcd Jun 1 10:42:21 igor-laptop kernel: [ 2226.086714] PM: resume of drv:usbhid dev:4-2:1.0 complete after 489.393 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086728] PM: resume of drv: dev:ep_81 complete after 489.384 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086745] PM: resume of drv: dev:ep_00 complete after 489.329 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086753] PM: resume of drv:usbhid dev:4-2:1.1 complete after 489.384 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086764] PM: resume of drv: dev:ep_82 complete after 489.373 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.180555] usb 7-2: reset full-speed USB device number 2 using uhci_hcd Jun 1 10:42:21 igor-laptop kernel: [ 2226.244858] firewire_core: rediscovered device fw0 Jun 1 10:42:21 igor-laptop kernel: [ 2226.335066] btusb 7-2:1.0: no reset_resume for driver btusb? Jun 1 10:42:21 igor-laptop kernel: [ 2226.335068] btusb 7-2:1.1: no reset_resume for driver btusb? Jun 1 10:42:21 igor-laptop kernel: [ 2226.432082] usb 6-1: reset full-speed USB device number 2 using uhci_hcd Jun 1 10:42:21 igor-laptop kernel: [ 2226.578280] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 985.301 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584296] PM: resume of drv:usb dev:7-2:1.0 complete after 986.693 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584308] PM: resume of drv: dev:ep_00 complete after 986.452 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584311] PM: resume of drv:usb dev:7-2:1.1 complete after 986.616 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584315] PM: resume of drv:usb dev:7-2:1.3 complete after 986.483 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584320] PM: resume of drv:usb dev:7-2:1.2 complete after 986.556 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584328] PM: resume of drv: dev:ep_03 complete after 986.588 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584331] PM: resume of drv: dev:ep_81 complete after 986.704 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584334] PM: resume of drv: dev:ep_83 complete after 986.617 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584337] PM: resume of drv: dev:ep_82 complete after 986.688 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584340] PM: resume of drv: dev:ep_02 complete after 986.667 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584344] PM: resume of drv: dev:ep_84 complete after 986.558 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584352] PM: resume of drv: dev:ep_04 complete after 986.542 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590883] PM: resume of drv: dev:ep_00 complete after 993.327 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590887] PM: resume of drv:usb dev:6-1:1.0 complete after 993.424 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590927] PM: resume of drv: dev:ep_82 complete after 993.395 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590934] PM: resume of drv: dev:ep_81 complete after 993.426 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590940] PM: resume of drv: dev:ep_01 complete after 993.456 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.592450] PM: resume of drv:sd dev:0:0:0:0 complete after 995.343 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.592461] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 802.688 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.592472] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 995.324 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.600339] PM: resume of devices complete after 1008.129 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.601293] PM: resume devices took 1.008 seconds Jun 1 10:42:21 igor-laptop kernel: [ 2226.601330] PM: Finishing wakeup. Jun 1 10:42:21 igor-laptop kernel: [ 2226.601332] Restarting tasks ... done. Jun 1 10:42:21 igor-laptop kernel: [ 2226.625660] video LNXVIDEO:01: Restoring backlight state Jun 1 10:42:22 igor-laptop kernel: [ 2227.478921] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S Jun 1 10:42:22 igor-laptop kernel: [ 2227.481981] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 Jun 1 10:42:22 igor-laptop kernel: [ 2227.527727] ADDRCONF(NETDEV_UP): wlan0: link is not ready Jun 1 10:42:22 igor-laptop kernel: [ 2227.532468] r8169 0000:03:00.0: eth0: link down Jun 1 10:42:22 igor-laptop kernel: [ 2227.533967] ADDRCONF(NETDEV_UP): eth0: link is not ready pm_suspend.log: Fri Jun 1 10:42:14 MSK 2012: Running hooks for suspend. Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux igor-laptop 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:33:05 UTC 2012 i686 i686 i386 GNU/Linux Module Size Used by pci_stub 12550 1 vboxpci 22882 0 vboxnetadp 13328 0 vboxnetflt 27211 0 vboxdrv 252189 3 vboxpci,vboxnetadp,vboxnetflt dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_idt 60251 1 arc4 12473 2 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi rfcomm 38139 12 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec bnep 17830 2 btusb 17912 2 bluetooth 158438 23 rfcomm,bnep,btusb joydev 17393 0 parport_pc 32114 0 snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec ppdev 12849 0 uvcvideo 67203 0 binfmt_misc 17292 1 videodev 86588 1 uvcvideo snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi nvidia 10958194 43 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq ir_mce_kbd_decoder 12681 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 psmouse 87213 0 ir_rc5_decoder 12459 0 serio_raw 13027 0 iwlwifi 287934 0 rc_rc6_mce 12454 0 ir_nec_decoder 12459 0 ene_ir 18019 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir mac80211 436455 1 iwlwifi snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 178679 2 iwlwifi,mac80211 hp_accel 25728 0 lis3lv02d 19268 1 hp_accel input_polldev 13648 1 lis3lv02d mac_hid 13077 0 wmi 18744 1 hp_wmi jmb38x_ms 17406 0 soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm memstick 15857 1 jmb38x_ms firewire_sbp2 18346 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp vesafb 13516 1 usbhid 41906 0 hid 77367 1 usbhid firewire_ohci 40180 0 firewire_core 56906 2 firewire_sbp2,firewire_ohci crc_itu_t 12627 1 firewire_core sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci r8169 56321 0 video 19068 0 total used free shared buffers cached Mem: 3095544 2364260 731284 0 159020 1280240 -/+ buffers/cache: 925000 2170544 Swap: 1718916 0 1718916 /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success. Running hook /etc/pm/sleep.d/10_grub-common suspend suspend: /etc/pm/sleep.d/10_grub-common suspend suspend: success. Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: Having NetworkManager put all interaces to sleep...Failed. /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend: /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend: /usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend: stop: Unknown instance: /usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend: /usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: nVidia binary video drive detected, not using quirks. /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0 /usr/lib/pm-utils/sleep.d/99video suspend suspend: success. Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend: /etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success. Fri Jun 1 10:42:19 MSK 2012: performing suspend Fri Jun 1 10:42:21 MSK 2012: Awake. Fri Jun 1 10:42:21 MSK 2012: Running hooks for resume Running hook /etc/pm/sleep.d/novatel_3g_suspend resume suspend: /etc/pm/sleep.d/novatel_3g_suspend resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend: /usr/lib/pm-utils/sleep.d/99video resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend: /usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: /dev/sda: setting Advanced Power Management level to 0xfe (254) APM_level = 254 /dev/sda: setting Advanced Power Management level to 0xfe (254) APM_level = 254 /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend: /usr/lib/pm-utils/sleep.d/95anacron resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend: /usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend: Reloaded unloaded modules. /usr/lib/pm-utils/sleep.d/75modules resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: Having NetworkManager wake interfaces back up...Failed. /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success. Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success. Running hook /etc/pm/sleep.d/10_grub-common resume suspend: /etc/pm/sleep.d/10_grub-common resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend: /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend: /usr/lib/pm-utils/sleep.d/00logging resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success. Fri Jun 1 10:42:22 MSK 2012: Finished.

  Read the article

• high load average, high wait, dmesg raid error messages (debian nfs server)

  - by John Stumbles

  Debian 6 on HP proliant (2 CPU) with raid (2*1.5T RAID1 + 2*2T RAID1 joined RAID0 to make 3.5T) running mainly nfs & imapd (plus samba for windows share & local www for previewing web pages); with local ubuntu desktop client mounting $HOME, laptops accessing imap & odd files (e.g. videos) via nfs/smb; boxes connected 100baseT or wifi via home router/switch uname -a Linux prole 2.6.32-5-686 #1 SMP Wed Jan 11 12:29:30 UTC 2012 i686 GNU/Linux Setup has been working for months but prone to intermittently going very slow (user experience on desktop mounting $HOME from server, or laptop playing videos) and now consistently so bad I've had to delve into it to try to find what's wrong(!) Server seems OK at low load e.g. (laptop) client (with $HOME on local disk) connecting to server's imapd and nfs mounting RAID to access 1 file: top shows load ~ 0.1 or less, 0 wait but when (desktop) client mounts $HOME and starts user KDE session (all accessing server) then top shows e.g. top - 13:41:17 up 3:43, 3 users, load average: 9.29, 9.55, 8.27 Tasks: 158 total, 1 running, 157 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.4%sy, 0.0%ni, 49.0%id, 49.7%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 903856k total, 851784k used, 52072k free, 171152k buffers Swap: 0k total, 0k used, 0k free, 476896k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3935 root 20 0 2456 1088 784 R 2 0.1 0:00.02 top 1 root 20 0 2028 680 584 S 0 0.1 0:01.14 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.12 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.16 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:00.42 events/0 10 root 20 0 0 0 0 S 0 0.0 0:02.26 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 netns 14 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 15 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.02 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.02 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.08 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.00 kseriod 28 root 20 0 0 0 0 S 0 0.0 0:04.19 kondemand/0 29 root 20 0 0 0 0 S 0 0.0 0:02.93 kondemand/1 30 root 20 0 0 0 0 S 0 0.0 0:00.00 khungtaskd 31 root 20 0 0 0 0 S 0 0.0 0:00.18 kswapd0 32 root 25 5 0 0 0 S 0 0.0 0:00.00 ksmd 33 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/0 34 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/1 35 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/0 36 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/1 203 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 204 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd 205 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/0 206 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/1 207 root 20 0 0 0 0 S 0 0.0 0:00.14 ata_aux 208 root 20 0 0 0 0 S 0 0.0 0:00.01 scsi_eh_0 dmesg suggests there's a disk problem: .............. (previous episode) [13276.966004] raid1:md0: read error corrected (8 sectors at 489900360 on sdc7) [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13279.569186] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13279.569211] ata4.00: irq_stat 0x40000008 [13279.569230] ata4.00: failed command: READ FPDMA QUEUED [13279.569257] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13279.569262] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13279.569306] ata4.00: status: { DRDY ERR } [13279.569321] ata4.00: error: { UNC } [13279.575362] ata4.00: configured for UDMA/133 [13279.575388] ata4: EH complete [13283.169224] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13283.169246] ata4.00: irq_stat 0x40000008 [13283.169263] ata4.00: failed command: READ FPDMA QUEUED [13283.169289] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13283.169294] res 41/40:00:07:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13283.169331] ata4.00: status: { DRDY ERR } [13283.169345] ata4.00: error: { UNC } [13283.176071] ata4.00: configured for UDMA/133 [13283.176104] ata4: EH complete [13286.224814] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13286.224837] ata4.00: irq_stat 0x40000008 [13286.224853] ata4.00: failed command: READ FPDMA QUEUED [13286.224879] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13286.224884] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13286.224922] ata4.00: status: { DRDY ERR } [13286.224935] ata4.00: error: { UNC } [13286.231277] ata4.00: configured for UDMA/133 [13286.231303] ata4: EH complete [13288.802623] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13288.802646] ata4.00: irq_stat 0x40000008 [13288.802662] ata4.00: failed command: READ FPDMA QUEUED [13288.802688] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13288.802693] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13288.802731] ata4.00: status: { DRDY ERR } [13288.802745] ata4.00: error: { UNC } [13288.808901] ata4.00: configured for UDMA/133 [13288.808927] ata4: EH complete [13291.380430] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13291.380453] ata4.00: irq_stat 0x40000008 [13291.380470] ata4.00: failed command: READ FPDMA QUEUED [13291.380496] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13291.380501] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13291.380577] ata4.00: status: { DRDY ERR } [13291.380594] ata4.00: error: { UNC } [13291.386517] ata4.00: configured for UDMA/133 [13291.386543] ata4: EH complete [13294.347147] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13294.347169] ata4.00: irq_stat 0x40000008 [13294.347186] ata4.00: failed command: READ FPDMA QUEUED [13294.347211] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13294.347217] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13294.347254] ata4.00: status: { DRDY ERR } [13294.347268] ata4.00: error: { UNC } [13294.353556] ata4.00: configured for UDMA/133 [13294.353583] sd 3:0:0:0: [sdc] Unhandled sense code [13294.353590] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [13294.353599] sd 3:0:0:0: [sdc] Sense Key : Medium Error [current] [descriptor] [13294.353610] Descriptor sense data with sense descriptors (in hex): [13294.353616] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [13294.353635] 23 05 6a 06 [13294.353644] sd 3:0:0:0: [sdc] Add. Sense: Unrecovered read error - auto reallocate failed [13294.353657] sd 3:0:0:0: [sdc] CDB: Read(10): 28 00 23 05 6a 00 00 00 08 00 [13294.353675] end_request: I/O error, dev sdc, sector 587557382 [13294.353726] ata4: EH complete [13294.366953] raid1:md0: read error corrected (8 sectors at 489900544 on sdc7) [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror and they're happening quite frequently, which I guess is liable to account for the performance problem(?) # dmesg | grep mirror [12433.561822] raid1: sdc7: redirecting sector 489900464 to another mirror [12449.428933] raid1: sdb7: redirecting sector 489900504 to another mirror [12464.807016] raid1: sdb7: redirecting sector 489900512 to another mirror [12480.196222] raid1: sdb7: redirecting sector 489900520 to another mirror [12495.585413] raid1: sdb7: redirecting sector 489900528 to another mirror [12510.974424] raid1: sdb7: redirecting sector 489900536 to another mirror [12526.374933] raid1: sdb7: redirecting sector 489900544 to another mirror [12542.619938] raid1: sdc7: redirecting sector 489900608 to another mirror [12559.431328] raid1: sdc7: redirecting sector 489900616 to another mirror [12576.553866] raid1: sdc7: redirecting sector 489900624 to another mirror [12592.065265] raid1: sdc7: redirecting sector 489900632 to another mirror [12607.621121] raid1: sdc7: redirecting sector 489900640 to another mirror [12623.165856] raid1: sdc7: redirecting sector 489900648 to another mirror [12638.699474] raid1: sdc7: redirecting sector 489900656 to another mirror [12655.610881] raid1: sdc7: redirecting sector 489900664 to another mirror [12672.255617] raid1: sdc7: redirecting sector 489900672 to another mirror [12672.288746] raid1: sdc7: redirecting sector 489900680 to another mirror [12672.332376] raid1: sdc7: redirecting sector 489900688 to another mirror [12672.362935] raid1: sdc7: redirecting sector 489900696 to another mirror [12674.201177] raid1: sdc7: redirecting sector 489900704 to another mirror [12698.045050] raid1: sdc7: redirecting sector 489900712 to another mirror [12698.089309] raid1: sdc7: redirecting sector 489900720 to another mirror [12698.111999] raid1: sdc7: redirecting sector 489900728 to another mirror [12698.134006] raid1: sdc7: redirecting sector 489900736 to another mirror [12719.034376] raid1: sdc7: redirecting sector 489900744 to another mirror [12734.545775] raid1: sdc7: redirecting sector 489900752 to another mirror [12734.590014] raid1: sdc7: redirecting sector 489900760 to another mirror [12734.624050] raid1: sdc7: redirecting sector 489900768 to another mirror [12734.647308] raid1: sdc7: redirecting sector 489900776 to another mirror [12734.664657] raid1: sdc7: redirecting sector 489900784 to another mirror [12734.710642] raid1: sdc7: redirecting sector 489900792 to another mirror [12734.721919] raid1: sdc7: redirecting sector 489900800 to another mirror [12734.744732] raid1: sdc7: redirecting sector 489900808 to another mirror [12734.779330] raid1: sdc7: redirecting sector 489900816 to another mirror [12782.604564] raid1: sdb7: redirecting sector 1242934216 to another mirror [12798.264153] raid1: sdc7: redirecting sector 1242935080 to another mirror [13245.832193] raid1: sdb7: redirecting sector 489898296 to another mirror [13261.376929] raid1: sdb7: redirecting sector 489898304 to another mirror [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror although the arrays are still running on all disks - they haven't given up on any yet: # cat /proc/mdstat Personalities : [raid1] [raid0] md10 : active raid0 md0[0] md1[1] 3368770048 blocks super 1.2 512k chunks md1 : active raid1 sde2[2] sdd2[1] 1464087824 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb7[0] sdc7[2] 1904684920 blocks super 1.2 [2/2] [UU] unused devices: <none> So I think I have some idea what the problem is but I am not a linux sysadmin expert by the remotest stretch of the imagination and would really appreciate some clue checking here with my diagnosis and what do I need to do: obviously I need to source another drive for sdc. (I'm guessing I could buy a larger drive if the price is right: I'm thinking that one day I'll need to grow the size of the array and that would be one less drive to replace with a larger one) then use mdadm to fail out the existing sdc, remove it and fit the new drive fdisk the new drive with the same size partition for the array as the old one had use mdadm to add the new drive into the array that sound OK?

  Read the article

• RAID5 over LVM on Ubuntu Server 12.04.3

  - by April Ethereal

  I'm trying to create a RAID5 software array using LVM. I use VirtualBox as I'm only learning how LVM works. So I've created 4 virtual SCSI drives and then did the following: pvcreate /dev/sd[b-e] vgcreate /dev/sd[b-e] raid5_vg lvcreate --type raid5 -i 3 -L 1G -n raid_lv raid5_vg However, I get an error after the last command: WARNING: Unrecognised segment type raid5 Using default stripesize 64.00 KiB Rounding size (256 extents) up to stripe boundary size (258 extents) Cannot update volume group raid5_vg with unknown segments in it! So it looks like raid5 is not a valid segment type. "lvm segtypes" also doesn't contain 'raid5' entry: root@ubuntu-lvm:~# lvm segtypes striped zero error free snapshot mirror So my question is - how could I create RAID5 logical volume using LVM only? It seems that it is possible, I saw a few references (not for Ubuntu, unfortunately) for RedHat and Gentoo systems. I don't want to use mdadm for now, until I find out that it is mandatory. Some info about my system is below: root@ubuntu-lvm:~# uname -a Linux ubuntu-lvm 3.8.0I use Ubuntu Server 12.04.3 (i686)-29-generic #42~precise1-Ubuntu SMP Wed Aug 14 15:31:16 UTC 2013 i686 i686 i386 GNU/Linux root@ubuntu-lvm:~# dpkg -l | grep lvm ii lvm2 2.02.66-4ubuntu7.3 The Linux Logical Volume Manager Thanks.

  Read the article

• How can I transfer files to a Kindle Fire with a Micro-USB cable?

  - by Jeff

  I'm running Ubuntu 11.10, and when I connect my Kindle Fire to my computer via micro usb, it is not recognized automatically. Other usb devices, such as my ipod and digital camera, are recognized just fine. It does not appear to be a usb power issue, since the Kindle Fire wakes up from sleeping when it is plugged in. I never get the message on the Kindle telling me it is ready to accept files from the computer, though. Here are the last 15 lines of dmesg after plugging the kindle in: jeff@prime:~$ dmesg | tail -n 15 [45918.269671] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [45929.072149] wlan0: no IPv6 routers present [46743.224217] usb 1-1: new high speed USB device number 5 using ehci_hcd [46743.364623] scsi8 : usb-storage 1-1:1.0 [46744.366102] scsi 8:0:0:0: Direct-Access Amazon Kindle 0001 PQ: 0 ANSI: 2 [46744.366356] scsi: killing requests for dead queue [46744.372494] scsi: killing requests for dead queue [46744.384510] scsi: killing requests for dead queue [46744.392348] scsi: killing requests for dead queue [46744.392731] scsi: killing requests for dead queue [46744.396853] scsi: killing requests for dead queue [46744.397214] scsi: killing requests for dead queue [46744.400795] scsi: killing requests for dead queue [46744.401589] sd 8:0:0:0: Attached scsi generic sg2 type 0 [46744.407520] sd 8:0:0:0: [sdb] Attached SCSI removable disk And here are my mounted filesystems: jeff@prime:~$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 298594984 174663712 108763480 62% / udev 1407684 4 1407680 1% /dev tmpfs 566924 896 566028 1% /run none 5120 0 5120 0% /run/lock none 1417308 300 1417008 1% /run/shm /home/jeff/.Private 298594984 174663712 108763480 62% /home/jeff I should note that, since I got Dropbox working on my Kindle, the usb is no longer strictly necessary, but as a matter of principle I'd love to get it working.

  Read the article

• Why do GPUs overheat?

  - by JAD

  About a year ago, I added a 9800GT (1 GB version) and a Corsair CX500 PSU to an HP M8000N computer. A few weeks ago, the HDD overheated and I decided to transfer the GPU & PSU to a new build, which consists of: i3 @ 3.3Ghz Gigabyte H61 Micro ATX Mobo 4GB RAM 500GB WD HDD DVD RW Drive Cooler Master Elite 430 Tower Once I had Win7 up and running, I installed all the essential drivers that came with the Gigabyte Mobo CD. However, whenever I tried installing the Graphics Media Accelerator driver, the computer would crash and enter an endless boot sequence on the next startup. I skipped installing this driver and installed the CD driver for the 9800GT, which by now is a year old. Everything was working fine, WEI rated my GPU at 6.6 graphics & aero performance. However, after updating my Nvidia drivers to the latest, the WEI dropped my rating to 3.3 for Aero, and 4.7 for graphics performance. Just to make sure that everything was ok, I ran Bad Company 2 on medium settings. The first few minutes ran just fine at a smooth framerate, so I dismissed this as Windows being Windows. About 6 hours later, I ran BC2 again. This time I averaged anywhere from 2-5 FPS. I checked the GPU temperature through GPU-Z, and it came back as 120C. The problem with this, is that the computer was on for six hours up to that point. Wouldn't the card have experienced a reactor core meltdown a lot sooner than that? Granted, the computer was "sleeping" some of the time, but still... The next day I took out a temperature gun and ran some tests. I would point the laser at a very specific area on the reverse side of the card (not the fan or "front"), and compare the temp reading with GPU-Z. After leaving the system on idle on idle for a few minutes, I ran BC2 twice. Here are the results: GPU-Z Reading / Temp Gun Reading / Time Null / 22.3°C / Comp is Off 53°C / 33.5°C / 1:49 78°C / 46°C / 1:53 - (First BC2 run; good framerate) 102°C / 64.6°C / 2:01 - (System is again on idle) 113°C / 64.8°C / 2:10 119°C / 71.8°C / 2:17 - (Second BC2 run; poor framerate) I should also mention that I also took a temp recording of another part of the GPU from 2:01-2:17. The temp in this area jumped from 75°C to 82.9°C in that time frame. This pretty much confirms that GPU-Z is reporting the temperature accurately, and the card is overheating. But I'd like to know why; the cars is doing nothing and still the temperature climbs at a steady rate. I thoroughly cleaned the GPU and PSU when I salvaged them from the old HP M8000N computer with a can of compressed air, dust cant be the issue. Similarly, the rest of the computer is brand new. I installed various Nvidia drivers, but no luck. It seems strange to me that a year-old card is suddenly failing on me; aren't they supposed to last at least two years? Could this be a driver issue? Is the motherboard faulty? Could the PSU be overfeeding the card on voltage? Neither case seems likely, as the CPU, RAM and otherwise the rest of the comp has worked flawlessly and has stayed well within respectable temp ranges (the i3 lingers around 50C, the HDD stays at 30C, so does the PSU). How can I pinpoint the issue?

  Read the article

• Performance problem with an Intel Wireless 5100

  - by Piet

  I just installed 12.04 on a HP Elitebook 2530p. The performance with wireless connection to an Eminem 4551 is very bad. Wired connection just works great. If I connect to my router (Eminent 4551) wired I have a good performance accessing internet pages with Firefox. When I try to access the same internet pages wireless I get a real bad performance. piet@piet-HP-EliteBook-2530p:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07) 00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 44:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 44:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) piet@piet-HP-EliteBook-2530p:~$

  Read the article

• Error in using DBAN on HDD

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• Best Way to Archive Digital Photos and Avoid Duplicate File Names

  - by user31575

  This problem pertains to archiving of digital pictures taken from multiple cameras. Answers here covered the general topic of the-mechanics-of-backups: How do you archive digital photos and videos ? I however face another problem. Having multiple cameras (canon) and multiple SD cards (mixed and matched at random), I have found that different SD cards have different photos with the same file name, i.e. two different photos each name IMG_3141.JPG. Additionally, for better or worse, I've backed up the files to multiple places and need to consolidate my backups. I want to eliminate duplicates, but not clobber files. The only way I can think of is to append the code (md5 or sha1) to the file name, i.e. IMG_3141.JPG becomes IMG_3141_KT229QZ31415926ASDF.JPG, then sorting them out Any better ways? (Note "open letter" address the 'duplicate file name' concern): http://photofocus.com/2010/09/13/an-open-letter-to-digital-camera-manufacturers-regarding-camera-file-naming/ )

  Read the article

• Fix corrupt NTFS partition without Windows

  - by Capt.Nemo

  MY NTFS Partition has gotten corrupt somehow (it's a relic from the days when I had Windows installed). I'm putting the debug output of fdisk and blkid here. At the same time, any OS is unable to mount my root partition, which is located next to my NTFS partition. I'm not sure if this has anything to do with it, though. I get the following error while trying to mount my root partition (sda5) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ dmesg | tail [ 1019.726530] Descriptor sense data with sense descriptors (in hex): [ 1019.726533] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1019.726551] 1a 3e ed 92 [ 1019.726558] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1019.726568] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 3e ed 40 00 01 00 00 [ 1019.726584] end_request: I/O error, dev sda, sector 440331666 [ 1019.726602] JBD: Failed to read block at offset 462 [ 1019.726609] ata1: EH complete [ 1019.726612] JBD: recovery failed [ 1019.726617] EXT4-fs (sda5): error loading journal When I open gparted (using live CD), I get an exclamation next to my NTFS drive which states Is there a way to run chkdsk without using windows ? My attempt to run fsck results in the following : ubuntu@ubuntu:~$ sudo fsck /dev/sda fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Update : I was able to fix the NTFS partition running chkdsk off HBCD, but it seems that the superblock problem still remains. *Update 2: * Fixed superblock issue using e2fsck -c /dev/sda5

  Read the article

• USB Mouse and Keyboard not working in Linux 4 Tegra

  - by Sijo

  I am a new person in Tegra Linux development. I have Tamontem NG Evaluation board with Tegra 3 Chip. I installed L4T sample file system from NVIDIA tegra Resources (https://developer.nvidia.com/linux-tegra) and installed the file system as described in the documentation provided in NVIDIA site. Already these was an SD card with L4T running. i dont want to change the boot loader. So I copied the boot.scr.uimg to root (/) folder and uImage to boot(/boot/) and it starts booting from the existing SD card. After that while booting, some errors occurred in some Bluetooth devices (there is no bluetooth device in the board). So I disabled Bluetooth by giving the following command sudo mv /etc/init/bluetooth.conf /etc/init/bluetooth.conf.noexec Now the problem is that mouse and keyboard are not working. So i cannot login. Even though i installed desktop, the mouse and keyboard are not working. But mouse and keyboard are enumerating. lsusb command is showing the USB mouse and keyboard. The installed file system is Ubuntu 13.04. Linux Kernel version is 3.1 What to do. Please help.Thanks in Advance.

  Read the article

• mdadm raid5 recover double disk failure - with a twist (drive order)

  - by Peter Bos

  Let me acknowledge first off that I have made mistakes, and that I have a backup for most but not all of the data on this RAID. I still have hope of recovering the rest of the data. I don't have the kind of money to take the drives to a recovery expert company. Mistake #0, not having a 100% backup. I know. I have a mdadm RAID5 system of 4x3TB. Drives /dev/sd[b-e], all with one partition /dev/sd[b-e]1. I'm aware that RAID5 on very large drives is risky, yet I did it anyway. Recent events The RAID become degraded after a two drive failure. One drive [/dev/sdc] is really gone, the other [/dev/sde] came back up after a power cycle, but was not automatically re-added to the RAID. So I was left with a 4 device RAID with only 2 active drives [/dev/sdb and /dev/sdd]. Mistake #1, not using dd copies of the drives for restoring the RAID. I did not have the drives or the time. Mistake #2, not making a backup of the superblock and mdadm -E of the remaining drives. Recovery attempt I reassembled the RAID in degraded mode with mdadm --assemble --force /dev/md0, using /dev/sd[bde]1. I could then access my data. I replaced /dev/sdc with a spare; empty; identical drive. I removed the old /dev/sdc1 from the RAID mdadm --fail /dev/md0 /dev/sdc1 Mistake #3, not doing this before replacing the drive I then partitioned the new /dev/sdc and added it to the RAID. mdadm --add /dev/md0 /dev/sdc1 It then began to restore the RAID. ETA 300 mins. I followed the process via /proc/mdstat to 2% and then went to do other stuff. Checking the result Several hours (but less then 300 mins) later, I checked the process. It had stopped due to a read error on /dev/sde1. Here is where the trouble really starts I then removed /dev/sde1 from the RAID and re-added it. I can't remember why I did this; it was late. mdadm --manage /dev/md0 --remove /dev/sde1 mdadm --manage /dev/md0 --add /dev/sde1 However, /dev/sde1 was now marked as spare. So I decided to recreate the whole array using --assume-clean using what I thought was the right order, and with /dev/sdc1 missing. mdadm --create /dev/md0 --assume-clean -l5 -n4 /dev/sdb1 missing /dev/sdd1 /dev/sde1 That worked, but the filesystem was not recognized while trying to mount. (It should have been EXT4). Device order I then checked a recent backup I had of /proc/mdstat, and I found the drive order. md0 : active raid5 sdb1[0] sde1[4] sdd1[2] sdc1[1] 8790402048 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU] I then remembered this RAID had suffered a drive loss about a year ago, and recovered from it by replacing the faulty drive with a spare one. That may have scrambled the device order a bit...so there was no drive [3] but only [0],[1],[2], and [4]. I tried to find the drive order with the Permute_array script: https://raid.wiki.kernel.org/index.php/Permute_array.pl but that did not find the right order. Questions I now have two main questions: I screwed up all the superblocks on the drives, but only gave: mdadm --create --assume-clean commands (so I should not have overwritten the data itself on /dev/sd[bde]1. Am I right that in theory the RAID can be restored [assuming for a moment that /dev/sde1 is ok] if I just find the right device order? Is it important that /dev/sde1 be given the device number [4] in the RAID? When I create it with mdadm --create /dev/md0 --assume-clean -l5 -n4 \ /dev/sdb1 missing /dev/sdd1 /dev/sde1 it is assigned the number [3]. I wonder if that is relevant to the calculation of the parity blocks. If it turns out to be important, how can I recreate the array with /dev/sdb1[0] missing[1] /dev/sdd1[2] /dev/sde1[4]? If I could get that to work I could start it in degraded mode and add the new drive /dev/sdc1 and let it resync again. It's OK if you would like to point out to me that this may not have been the best course of action, but you'll find that I realized this. It would be great if anyone has any suggestions.

  Read the article

• Ubuntu 12.04 taking too much time to boot

  - by adarshdinesh

  Ubuntu 12.04 is taking much time for booting, Here is the system kernel message while booting .It is showing that some anacron was killed ,why ? and how to fix the problem ? [ 2.241047] scsi6 : usb-storage 2-1.6:1.0 [ 2.241501] usbcore: registered new interface driver usb-storage [ 2.241895] USB Mass Storage support registered. [ 3.240670] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.241791] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.243083] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 12.568641] Adding 4037904k swap on /dev/sda3. Priority:-1 extents:1 across:4037904k [ 12.615014] udevd[462]: starting version 175 [ 12.651334] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 12.655283] [drm] Initialized drm 1.1.0 20060810 ................... [ 14.118369] init: alsa-restore main process (982) terminated with status 19 [ 14.252595] init: anacron main process (1033) killed by TERM signal [ 14.285763] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 14.285841] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.285925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.285991] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.615073] init: plymouth-stop pre-start process (1222) terminated with status 1 [ 16.447287] wlan0: authenticate with c0:8a:de:7c:60:e8 (try 1) [ 16.448858] wlan0: authenticated [ 16.453405] wlan0: associate with c0:8a:de:7c:60:e8 (try 1) [ 16.456392] wlan0: RX AssocResp from c0:8a:de:7c:60:e8 (capab=0x431 status=0 aid=2) [ 16.456398] wlan0: associated [ 16.457014] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 16.457017] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 16.457019] ieee80211 phy0: changing basic rates failed: -22 [ 16.457021] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 16.457226] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.654196] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 17.823565] ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 180/256 dur 1946/1504 [ 18.220865] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.881422] wlan0: no IPv6 routers present [ 68.228293] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 73.240133] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 76.574490] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 102.180006] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 103.100984] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 124.171624] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)

  Read the article

• How do I install BCM4312 wireless drivers?

  - by t3ch

  completely new to Ubuntu. How do I add Wireless driver for my laptop? I am running a Dell XPS M1330. Right now its acts as if I dont have a Wi-Fi card. :~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

  Read the article

• Autodetect/mount SDCards and run script for them on Linux

  - by Brendan

  Hey Everyone, I'm currently running SME Server, and need to have a script run upon the attachment of SD Cards to my server. The script itself works fine (it copies the contents of the cards), but the automounting and execution of the script is where I'm having issues. The I have a USB hub consisting of 10 USB ports; that shows up as: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 (The hub is the TERMINUS TECHNOLOGY INC entries) As I cannot plug SD Cards directly into the server; I use a USB to SD card attachement (10 of them) plugged into the hub to read the cards. Upon pluggig the 10 attachments (without cards) into the hub; lsusb yields the following: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 073: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 072: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 071: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 070: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 069: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 068: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 067: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 066: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 065: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 064: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 As you can see, the readers are the "Gensys Logic, Inc" entries. Plugging in an SD card to a reader doesn't affect lsusb (it reads exactly as above), however my system recognises the cards fine; as indicated by dmesg: Attached scsi generic sg11 at scsi54, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 73 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 If I manually mount sdd1 (mount /dev/sdd1 /somedirectory/) this works fine. What I'm really after is a solution that automounts each of the cards as they are inputted into the reader; and executes a script for them (this will involve copying their contents to another directory). My problem is that I don't know how to do this; I don't think udev will work as the USB devices don't change; if I could somehow get udev working with /dev/disk/by-path/ however I think this is doable (it seems to keep constant entries). ls /dev/disk returns: pci-0000:00:1d.7-usb-0:4.1.1.1:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0 pci-0000:0b:01.0-scsi-0:0:1:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0-part2 From above, we can see I have only one card plugged into the reader (pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1). Going mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 Works and places the card under /media/usbdisk/, however: mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 slot1/ doesn't work, and returns "mount: can't get address for /dev/disk/by-path/pci-0000" Any ideas and solutions would be great, I've seen the knowledge of a lot of the guys on here before so I'm hopeful someone can help me out. Thanks

  Read the article

• How can a usb be detected but not show up anywhere?

  - by George Mauer

  I started the morning by trying to create a bootable usb using a 2gb stick and the startup disk creator. It seemed to run through the whole process just fine until it got to a screen that read something like "Creating memory partion" and which sat on 100% for about 45 minutes before I hit cancel and removed the usb stick. Now the usb stick is not being detected as storage or...anything (even on my windows pc) though it does show up in the syslog. Allow me to demonstrate. We start with the usb not plugged in: [georgemauer@ubuntu:~]$ sudo fdisk -l (04-04 16:01) Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x994bdc0f Device Boot Start End Blocks Id System /dev/sda1 2048 27650047 13824000 27 Hidden NTFS WinRE /dev/sda2 * 27650048 27854847 102400 7 HPFS/NTFS/exFAT /dev/sda3 27854848 976771119 474458136 7 HPFS/NTFS/exFAT I plug in the usb: [georgemauer@ubuntu:~]$ tail -f /var/log/syslog ***Snip*** Apr 4 15:01:18 ubuntu wpa_supplicant[1136]: WPA: Group rekeying completed with 00:24:36:ad:e7:3f [GTK=TKIP] Apr 4 15:02:29 wpa_supplicant[1136]: last message repeated 3 times Apr 4 15:02:29 ubuntu kernel: [22122.788133] usb 2-1: new high speed USB device number 13 using ehci_hcd Apr 4 15:02:29 ubuntu kernel: [22122.923873] scsi10 : usb-storage 2-1:1.0 Apr 4 15:02:29 ubuntu mtp-probe: checking bus 2, device 13: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1" Apr 4 15:02:30 ubuntu mtp-probe: bus: 2, device: 13 was not an MTP device Apr 4 15:02:30 ubuntu kernel: [22123.926154] scsi 10:0:0:0: Direct-Access GENERIC USB Mass Storage 1.00 PQ: 0 ANSI: 2 Apr 4 15:02:30 ubuntu kernel: [22124.105118] sd 10:0:0:0: Attached scsi generic sg1 type 0 Apr 4 15:02:30 ubuntu kernel: [22124.108212] sd 10:0:0:0: [sdb] Attached SCSI removable disk but then: [georgemauer@ubuntu:~]$ ls /mnt -alF (04-04 16:02) total 8 drwxr-xr-x 2 root root 4096 2011-04-21 12:51 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ [georgemauer@ubuntu:~]$ ls /media -alF (04-04 16:03) total 8 drwxr-xr-x 2 root root 4096 2012-04-04 12:18 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ What could be going on and how do I recover my usb key?

  Read the article

• HTC Android device mounted as USB drive is read-only unless I'm root

  - by Ian Dickinson

  When I connect my HTC Incredible S to my Ubuntu 10.10 system as a USB drive, the device seems to mount OK, but is read-only unless I access it as root. For example, if I run nautilus, I can't drag and drop files to the SD-card in the phone, but if I run sudo nautilus I can. I have USB debug support set on the phone (Applications > Development > USB debugging) and I have added a rule for the device in /etc/udev/rules.d/51-android.rules on my Ubuntu system. Any suggestions as to how I can mount the drive so that I can copy content to the SD card without needing to sudo? Update Following advice from waltinator, I added the following line to my /etc/fstab: UUID=3537-3834 /media/usb1 vfat rw,user,noexec,nodev,nosuid,noauto However, the Android device is still being auto-mounted on /media/usb1 with uid and gid root. Update 2 syslog output: Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdd1 /media/usb1 Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: run-parts /etc/usbmount/mount.d

  Read the article

• Why does DBAN crash on my HDDs?

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• Bumblebee [ERROR]Cannot access secondary GPU - error: [XORG]

  - by Lunchbox

  Though this may seem like a duplicate question, none of the suggestions I've seen have worked for me, however nearly all posters get good results. I'll start with hardware: Metabox W350ST notebook Intel Core i7 4700 16GB RAM GTX 765M (with Optimus) 128GB SSD 1TB SSHD My initial error output when trying to optirun a game is: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [133.973920] [ERROR]Aborting because fallback start is disabled. If anything else is needed to troubleshoot this just let me know. Adding bumblebee.conf: # Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver=nvidia # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau DRIVER VERSION - Output of jockey-text -l: nvidia_304_updates - nvidia_304_updates (Proprietary, Enabled, Not in use)

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >