Search Results

Search found 3578 results on 144 pages for 'smtp auth'.

Page 76/144 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• Connection Filtering with Multiple DNSBL's?

  - by JohnyD

  Is there any advantage or disadvantage to using multiple DNSBL's with ones connection filtering? I just switched from SpamHaus to BarracudaCentral but have added in SpamHaus to test for increased effectiveness. So far there is no dip in performance and no increased load on our SMTP server.

  Read the article

• Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

  - by GriffJ

  Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

  Read the article

• vmware problems - networking - no packet response

  - by jack

  XP is my host. Ubuntu is my Guest in VMware. When I do the following commands, I should get SMTP respones but now get no response. I use wireshark to analayze it. Also in wireshark shows nothing. root@vmware:~# netcat 192.168.1.2 25 220 762462a8c4d Microsoft ESMTP MAIL Service, Version: 6.0.2600.5949 ready at Fri, 12 May 2010 18:04:20 +0800 EHLO SAYHELLO VRFY TEST@LOCALHOST test \ sdfsafsd How can I fix it?

  Read the article

• How should I configure postfix to avoid sent emails bouncing because of "Invalid HELO name"

  - by Vlad Socaciu

  Some mail sent from sites on my server bounce back with the following mail.log message Nov 26 17:27:53 blogu postfix/smtp[16858]: C4DD22908EC0: to=, relay=rejecting-domain.ro[rejecting-ip]:25, delay=2.5, delays=0.1/0/2.3/0.04, dsn=5.0.0, status=bounced (host rejecting-domain.ro[rejecting-ip] said: 550 Access denied - Invalid HELO name (See RFC2821 4.1.1.1) (in reply to MAIL FROM command)) On the receiving end, my emails are logged like this: 2011-11-22 15:09:35 H=static.39.80.4.46.clients.your-server.de (Ubuntu-1004-lucid-64-minimal) [my-server-ip] rejected MAIL : Access denied - Invalid HELO name (See RFC2821 4.1.1.1)

  Read the article

• Where are Outlook 2010 Email Settings, not the pst data files

  - by user64908

  I've found all my Outlook data files which contain all my emails at the following paths: C:\Users\C\AppData\Local\Microsoft\Outlook C:\Users\C\AppData\Roaming\Microsoft\Outlook and C:\Users\C\My Documents\Outlook Files\ I've migrated all these and copied it to my new machine at the same directories however my configuration is not there! None of my email pop/smtp settings are there, only the pst is loaded with my emails but all other configuration is gone, where precisely is that configuration stored?

  Read the article

• not receiving mails with more than one attachment

  - by ud

  Hi there! My problem is that I can't receive any mail with attachments. A mail without attachment is no problem. Here the smtp-queue, maybe it will help you guys. http://i39.tinypic.com/ay0byq.jpg

  Read the article

• How can I put together services bettwen differents servers?

  - by poz2k4444

  For a schoolar project, I have to run differents services in a lab enviroment where I'll have 6 computers working as servers, what services can I put together, and what cannot be, in order to prevent security risks, and considereiting that if one service goes down, affects less possible the function of the server farm, the services are: MySql Http for intranet Https DHCP IPP SMTP LDAP VPN SSH NTP DNS NFS I'll use linux

  Read the article

• How to send emails from my web app hosted remotely in a shared server ?

  - by user35538

  Hi, i would like to send emails from my web app hosted remotely in a shared server. I tried with google SMTP server but it doesn't work ok always. Now i would like to try with a server email, so how can i know if i have a server mail that i can use to send emails from my web app? Javi

  Read the article

• not receiving mails with more than one attachment (some come with a delay, very random)

  - by ud

  Hi there! My problem is that I can't receive any mail with more than one attachment. A mail without attachment is no problem. Some mails get throgh the queue after a time, but it's very random. Here the smtp-queue, maybe it will help you guys. http://i39.tinypic.com/ay0byq.jpg

  Read the article

• Configure exim in debian 6

  - by blakcaps

  I am trying to configure exim with gmail in my debian 6 system as per this tutorial http://www.manu-j.com/blog/wordpress-exim4-ubuntu-gmail-smtp/75/.After configuring, When i run update-exim4.conf i am getting this message, Exim configuration error: two client authenticators (gmail_login and login) have the same public name (LOGIN) Invalid new configfile /var/lib/exim4/config.autogenerated.tmp, not installing /var/lib/exim4/config.autogenerated.tmp to /var/lib/exim4/config.autogenerated Any pointers to solve this?

  Read the article

• How to open port 25 on the server

  - by liuxingruo

  I'm using centOS. I want to implement a smtp mail server, and I have installed postfix and dovecot(both have been set correctly). I tried to telnet the 25 port, but it returns Unable to connect to remote host: Connection refused So, How can I open the 25 port? Thanks!

  Read the article

• Sendmail issue with AuthInfo

  - by chris

  I'm having trouble finding out where to add in this line to /etc/mail/access: AuthInfo:smtp.sendgrid.net "U:XXX" "P:XXX" "M:PLAIN" When I run this: m4 sendmail.mc >sendmail.cf My error: WARNING: feature greetpause before access.db.... I also am modifying sendmail.mc with: define(`SMART_HOST', `smtp.sendgrid.net')dnl FEATURE(`access_db')dnl define(`RELAY_MAILER_ARGS', `TCP $h 587')dnl define(`ESMTP_MAILER_ARGS', `TCP $h 587')dnl

  Read the article

• Exim To Include Internal Email When Sending

  - by user219951

  I wonder if you can help me out... at the moment were using exim to relay our emails to an smtp_relay. The only problem is if the user exists and has an email address it won't exit the server and send them mail using our relay. I need it to go to the relay even if it's an internal email address. Hope that make sense, this is how we have got our relay setup at the moment smart_route: driver = manualroute domains = !+local_domains transport = remote_smtp_smtpauth route_list = * smtp.sendgrid.net:587 Thanks

  Read the article

• not receiving mails with more than one attachment from one specific domain (some come with a delay,

  - by ud

  Hi there! My problem is that I can't receive any mail with more than one attachment from one specific domain. A mail without attachment is no problem. Some mails get throgh the queue after a time, but it's very random. Here the smtp-queue, maybe it will help you guys. http://i39.tinypic.com/ay0byq.jpg

  Read the article

• Subdomain mapping to domain

  - by bobobobo

  What happens if you have 2 DNS entries: Name | Type | Value -------------+-------+-------------- example.com | A | 20.20.20.20 example.com | MX | mail.example.com Does this mean that smtp requests to example.com will map to 20.20.20.20, and somehow request in the headers mail.example.com? What?

  Read the article

• not receiving mails with attachments

  - by ud

  Hi there! My problem is that I can't receive any mail with attachments. A mail without attachment is no problem. Here the smtp-queue, maybe it will help you guys. http://i39.tinypic.com/ay0byq.jpg

  Read the article

• How to redirect all postfix emails to one external email address?

  - by thierrythelliez

  To create a test email server, I have a similar requirement as: http://serverfault.com/questions/94640/how-to-redirect-all-outgoing-email-from-postfix-to-a-single-address-for-testing But I need to send all the emails to an external account, not a local one. I would like to do something like: xyz:[email protected] but xyz is not local nor smtp.

  Read the article

• How do I determine the linux server software/version and email server software/version running

  - by rwilkins

  I just inherited this a single linux box running pop/smtp for a small office (25 users). I'm new to Linux. I think the box is running Debian GNU/Linux 5.0 as the server (this is bannered accross the screen occassionally) but not sure of the release/kernal/build etc. I need to be certain of both the server os and email linux versions in order to perform research, admin and support. Any help/pointers on how to do this is much appreciated.

  Read the article

• Postfix sendmail bypass restrictions [on hold]

  - by EnEli

  I have setup a postfix/dovecot mail server and all thing work fine! BUT: I use virtual mailboxes and when you try to send a mail to a non existent mailbox via telnet postfix will punch you... But if you use sendmail, all restricitons are bypassed... This is bad becuase dovecot does not know what to do with this mail! It will stay in the queue for ever... How can I force sendmail to use normal smtp?

  Read the article

• Hi, anyone met the sending issue like this? By using powershell

  - by pansal

  My script is about sending notfication email, and it was running well on my local machine, but when I removed it to an server 2k3, the email cannot be sent out with below error log: Exception calling "Send" with "1" argument(s): "The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated" At line:1 char:19 + $smtp_buglist.Send <<<< ($mail_buglist) + CategoryInfo : NotSpecified: (:) [], MethodInvocationException + FullyQualifiedErrorId : DotNetMethodException Please help me out of this, I am confused.

  Read the article

• Problem with setup VPN in Ubuntu Server 12.04

  - by Yozone W.

  I have a problem with setup VPN server on my Ubuntu VPS, here is my server environments: Ubuntu Server 12.04 x86_64 xl2tpd 1.3.1+dfsg-1 pppd 2.4.5-5ubuntu1 openswan 1:2.6.38-1~precise1 After install software and configuration: ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K3.2.0-24-virtual (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] /var/log/auth.log message: Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [RFC 3947] method set to=115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] meth=114, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-08] meth=113, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-07] meth=112, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-06] meth=111, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-05] meth=110, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-04] meth=109, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: ignoring Vendor ID payload [FRAGMENTATION 80000000] Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [Dead Peer Detection] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: responding to Main Mode from unknown peer [My IP Address] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R1: sent MR1, expecting MI2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): peer is NATed Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R2: sent MR2, expecting MI3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: Main mode peer ID is ID_IPV4_ADDR: '192.168.12.52' Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: switched from "L2TP-PSK-NAT" to "L2TP-PSK-NAT" Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: new NAT mapping for #5, was [My IP Address]:2251, now [My IP Address]:2847 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp1024} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: the peer proposed: [My Server IP Address]/32:17/1701 -> 192.168.12.52/32:17/0 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: responding to Quick Mode proposal {msgid:8579b1fb} Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: us: [My Server IP Address]<[My Server IP Address]>:17/1701 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: them: [My IP Address][192.168.12.52]:17/65280===192.168.12.52/32 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x08bda158 <0x4920a374 xfrm=AES_256-HMAC_SHA1 NATOA=192.168.12.52 NATD=[My IP Address]:2847 DPD=enabled} Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA(0x08bda158) payload: deleting IPSEC State #6 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: ERROR: netlink XFRM_MSG_DELPOLICY response for flow eroute_connection delete included errno 2: No such file or directory Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received and ignored informational message Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA payload: deleting ISAKMP State #5 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address]: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:51:16 vpn pluto[3963]: packet from [My IP Address]:2847: received and ignored informational message xl2tpd -D message: xl2tpd[4289]: Enabling IPsec SAref processing for L2TP transport mode SAs xl2tpd[4289]: IPsec SAref does not work with L2TP kernel mode yet, enabling forceuserspace=yes xl2tpd[4289]: setsockopt recvref[30]: Protocol not available xl2tpd[4289]: This binary does not support kernel L2TP. xl2tpd[4289]: xl2tpd version xl2tpd-1.3.1 started on vpn.netools.me PID:4289 xl2tpd[4289]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. xl2tpd[4289]: Forked by Scott Balmos and David Stipp, (C) 2001 xl2tpd[4289]: Inherited by Jeff McAdams, (C) 2002 xl2tpd[4289]: Forked again by Xelerance (www.xelerance.com) (C) 2006 xl2tpd[4289]: Listening on IP address [My Server IP Address], port 1701 Then it just stopped here, and have no any response. I can't connect VPN on my mac client, the /var/log/system.log message: Oct 16 15:17:36 azone-iMac.local configd[17]: SCNC: start, triggered by SystemUIServer, type L2TP, status 0 Oct 16 15:17:36 azone-iMac.local pppd[3799]: pppd 2.4.2 (Apple version 596.13) started by azone, uid 501 Oct 16 15:17:38 azone-iMac.local pppd[3799]: L2TP connecting to server 'vpn.netools.me' ([My Server IP Address])... Oct 16 15:17:38 azone-iMac.local pppd[3799]: IPSec connection started Oct 16 15:17:38 azone-iMac.local racoon[359]: Connecting. Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 started (Initiated by me). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 2). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 3). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 4). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 5). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 AUTH: success. (Initiator, Main-Mode Message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 Initiator: success. (Initiator, Main-Mode). Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 started (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local pppd[3799]: IPSec connection established Oct 16 15:17:59 azone-iMac.local pppd[3799]: L2TP cannot connect to the server Oct 16 15:17:59 azone-iMac.local racoon[359]: IPSec disconnecting from server [My Server IP Address] Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Anyone help? Thanks a million!

  Read the article

• Problem with setup VPN on Ubuntu Server 12.04

  - by Yozone W.

  I have a problem with setup VPN server on my Ubuntu VPS, here is my server environments: Ubuntu Server 12.04 x86_64 xl2tpd 1.3.1+dfsg-1 pppd 2.4.5-5ubuntu1 openswan 1:2.6.38-1~precise1 After install software and configuration: ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K3.2.0-24-virtual (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] /var/log/auth.log message: Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [RFC 3947] method set to=115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] meth=114, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-08] meth=113, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-07] meth=112, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-06] meth=111, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-05] meth=110, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-04] meth=109, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: ignoring Vendor ID payload [FRAGMENTATION 80000000] Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [Dead Peer Detection] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: responding to Main Mode from unknown peer [My IP Address] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R1: sent MR1, expecting MI2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): peer is NATed Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R2: sent MR2, expecting MI3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: Main mode peer ID is ID_IPV4_ADDR: '192.168.12.52' Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: switched from "L2TP-PSK-NAT" to "L2TP-PSK-NAT" Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: new NAT mapping for #5, was [My IP Address]:2251, now [My IP Address]:2847 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp1024} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: the peer proposed: [My Server IP Address]/32:17/1701 -> 192.168.12.52/32:17/0 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: responding to Quick Mode proposal {msgid:8579b1fb} Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: us: [My Server IP Address]<[My Server IP Address]>:17/1701 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: them: [My IP Address][192.168.12.52]:17/65280===192.168.12.52/32 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x08bda158 <0x4920a374 xfrm=AES_256-HMAC_SHA1 NATOA=192.168.12.52 NATD=[My IP Address]:2847 DPD=enabled} Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA(0x08bda158) payload: deleting IPSEC State #6 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: ERROR: netlink XFRM_MSG_DELPOLICY response for flow eroute_connection delete included errno 2: No such file or directory Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received and ignored informational message Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA payload: deleting ISAKMP State #5 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address]: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:51:16 vpn pluto[3963]: packet from [My IP Address]:2847: received and ignored informational message xl2tpd -D message: xl2tpd[4289]: Enabling IPsec SAref processing for L2TP transport mode SAs xl2tpd[4289]: IPsec SAref does not work with L2TP kernel mode yet, enabling forceuserspace=yes xl2tpd[4289]: setsockopt recvref[30]: Protocol not available xl2tpd[4289]: This binary does not support kernel L2TP. xl2tpd[4289]: xl2tpd version xl2tpd-1.3.1 started on vpn.netools.me PID:4289 xl2tpd[4289]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. xl2tpd[4289]: Forked by Scott Balmos and David Stipp, (C) 2001 xl2tpd[4289]: Inherited by Jeff McAdams, (C) 2002 xl2tpd[4289]: Forked again by Xelerance (www.xelerance.com) (C) 2006 xl2tpd[4289]: Listening on IP address [My Server IP Address], port 1701 Then it just stopped here, and have no any response. I can't connect VPN on my mac client, the /var/log/system.log message: Oct 16 15:17:36 azone-iMac.local configd[17]: SCNC: start, triggered by SystemUIServer, type L2TP, status 0 Oct 16 15:17:36 azone-iMac.local pppd[3799]: pppd 2.4.2 (Apple version 596.13) started by azone, uid 501 Oct 16 15:17:38 azone-iMac.local pppd[3799]: L2TP connecting to server 'vpn.netools.me' ([My Server IP Address])... Oct 16 15:17:38 azone-iMac.local pppd[3799]: IPSec connection started Oct 16 15:17:38 azone-iMac.local racoon[359]: Connecting. Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 started (Initiated by me). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 2). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 3). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 4). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 5). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 AUTH: success. (Initiator, Main-Mode Message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 Initiator: success. (Initiator, Main-Mode). Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 started (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local pppd[3799]: IPSec connection established Oct 16 15:17:59 azone-iMac.local pppd[3799]: L2TP cannot connect to the server Oct 16 15:17:59 azone-iMac.local racoon[359]: IPSec disconnecting from server [My Server IP Address] Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Anyone help? Thanks a million!

  Read the article

• Warning message during boot after installation of kernel 3.3: Kernel needs AppArmor 2.4 compatibility patch

  - by Matus Frisik

  I have Ubuntu Server 11.10 and after installation of kernel 3.3 (I just followed instructions from site www.upbuntu.com - How To Install Linux 3.3 Kernel In Ubuntu 11.10/12.04) It shows me following message during boot: fsck from util-linux 2.19.1 fsck from util-linux 2.19.1 /dev/sda5: clean, 204099/1152816 files, 988854/4608639 blocks /dev/sda6: clean, 2345/1281120 files, 142711/5120710 blocks modem-manager[830]: ModemManager (version 0.5) starting... * Starting mDNS/DNS-SD daemon [154G[ OK ] * Starting CUPS printing spooler/server [154G[ OK ] * Starting Mount network filesystems [154G[ OK ] * Stopping Mount network filesystems [154G[ OK ] * Starting System V initialisation compatibility [154G[ OK ] * Stopping Failsafe Boot Delay [154G[ OK ] Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/bin.ping (/etc/apparmor.d/bin.ping line 28): profile /bin/ping network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/lightdm-guest-session (/etc/apparmor.d/lightdm-guest-session line 71): profile /usr/lib/lightdm/lightdm-guest-session-wrapper network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.dhclient (/etc/apparmor.d/sbin.dhclient line 73): profile /sbin/dhclient network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.klogd (/etc/apparmor.d/sbin.klogd line 35): profile /sbin/klogd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.syslog-ng (/etc/apparmor.d/sbin.syslog-ng line 52): profile /sbin/syslog-ng network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.syslogd (/etc/apparmor.d/sbin.syslogd line 40): profile /sbin/syslogd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile /usr/lib/chromium-browser/chromium-browser network rules not enforced Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile browser_java network rules not enforced Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile browser_openjdk network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince network rules not enforced Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince-previewer network rules not enforced Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince-thumbnailer network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.deliver (/etc/apparmor.d/usr.lib.dovecot.deliver line 24): profile /usr/lib/dovecot/deliver network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.dovecot-auth (/etc/apparmor.d/usr.lib.dovecot.dovecot-auth line 24): profile /usr/lib/dovecot/dovecot-auth network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.imap (/etc/apparmor.d/usr.lib.dovecot.imap line 23): profile /usr/lib/dovecot/imap network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.imap-login (/etc/apparmor.d/usr.lib.dovecot.imap-login line 22): profile /usr/lib/dovecot/imap-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.managesieve-login (/etc/apparmor.d/usr.lib.dovecot.managesieve-login line 22): profile /usr/lib/dovecot/managesieve-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.pop3 (/etc/apparmor.d/usr.lib.dovecot.pop3 line 22): profile /usr/lib/dovecot/pop3 network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.pop3-login (/etc/apparmor.d/usr.lib.dovecot.pop3-login line 21): profile /usr/lib/dovecot/pop3-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.telepathy (/etc/apparmor.d/usr.lib.telepathy line 86): profile /usr/lib/telepathy/mission-control-5 network rules not enforced Warning from /etc/apparmor.d/usr.lib.telepathy (/etc/apparmor.d/usr.lib.telepathy line 86): profile /usr/lib/telepathy/telepathy-* network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.avahi-daemon (/etc/apparmor.d/usr.sbin.avahi-daemon line 30): profile /usr/sbin/avahi-daemon network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 170): profile /usr/lib/cups/backend/cups-pdf network rules not enforced Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 170): profile /usr/sbin/cupsd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.dnsmasq (/etc/apparmor.d/usr.sbin.dnsmasq line 51): profile /usr/sbin/dnsmasq network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.dovecot (/etc/apparmor.d/usr.sbin.dovecot line 37): profile /usr/sbin/dovecot network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.identd (/etc/apparmor.d/usr.sbin.identd line 31): profile /usr/sbin/identd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.mdnsd (/etc/apparmor.d/usr.sbin.mdnsd line 35): profile /usr/sbin/mdnsd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.mysqld (/etc/apparmor.d/usr.sbin.mysqld line 44): profile /usr/sbin/mysqld network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.nmbd (/etc/apparmor.d/usr.sbin.nmbd line 21): profile /usr/sbin/nmbd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.nscd (/etc/apparmor.d/usr.sbin.nscd line 46): profile /usr/sbin/nscd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.smbd (/etc/apparmor.d/usr.sbin.smbd line 40): profile /usr/sbin/smbd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.tcpdump (/etc/apparmor.d/usr.sbin.tcpdump line 64): profile /usr/sbin/tcpdump network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.traceroute (/etc/apparmor.d/usr.sbin.traceroute line 26): profile /usr/sbin/traceroute network rules not enforced * Starting AppArmor profiles [160G [154G[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher Checking for running unattended-upgrades: What does this warnings mean and how can I fix it? Informations about my system: response@response:~$ uname -a Linux response 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 01:43:18 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• Cannot log in to the desktop on ubuntu 11.10?

  - by Jichao

  The problem is, I could log in under the terminal, i could ifup eth0, i could do anything I want in the terminal, but if I use ctrl+alt+f7 goto the gnome login screen, after I input the correct password, the system just send me back to same login screen again. I have created a new user, but it didn't work. I have change all the files under ~/ to jichao:jichao(which is my username) with chown -hR jichao:jichao /home/jichao, but it didn't work too. I searched the internet, somebody said I should see the logs under /var/log/gdm, but there is not a /var/log/gdm directory in my box. Here are the tail of files under /var/log/ tail X.org.log [ 3263.348] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 3263.348] (**) Dell Dell USB Keyboard: always reports core events [ 3263.348] (**) Dell Dell USB Keyboard: Device: "/dev/input/event5" [ 3263.348] (--) Dell Dell USB Keyboard: Found keys [ 3263.348] (II) Dell Dell USB Keyboard: Configuring as keyboard [ 3263.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29/event5" [ 3263.348] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) [ 3263.348] (**) Option "xkb_rules" "evdev" [ 3263.348] (**) Option "xkb_model" "pc105" [ 3263.348] (**) Option "xkb_layout" "us" kern.log Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701247] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input27 Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701392] generic-usb 0003:413C:2003.0018: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.642572] usb 2-1.3: new low speed USB device number 17 using ehci_hcd Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 syslog Mar 20 09:33:02 jichao-MS-730 mtp-probe: bus: 2, device: 17 was not an MTP device Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 mtp-probe: checking bus 2, device 18: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4" Mar 20 09:34:08 jichao-MS-730 mtp-probe: bus: 2, device: 18 was not an MTP device Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 auth.log Mar 20 09:18:52 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:18:53 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:18:53 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.240" (uid=104 pid=6457 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") Mar 20 09:19:38 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jicha Mar 20 09:19:39 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jichao Mar 20 09:20:10 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session closed for user lightdm Mar 20 09:20:11 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session opened for user lightdm by (uid=0) Mar 20 09:20:11 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:20:12 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:20:12 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.247" (uid=104 pid=6572 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") It seems that my .xsession-errors does not grow since yesterday. Here is my .xsession-error: (gnome-settings-daemon:1550): Gdk-WARNING **: The program 'gnome-settings-daemon' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 26702 error_code 3 request_code 2 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, /usr/share/system-config-printer/applet.py:336: GtkWarning: ??????????????:“pixmap”, self.loop.run () (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, common-plugin-Message: checking whether we have a device for 4: yes common-plugin-Message: checking whether we have a device for 5: yes common-plugin-Message: checking whether we have a device for 6: yes common-plugin-Message: checking whether we have a device for 7: yes common-plugin-Message: checking whether we have a device for 10: yes common-plugin-Message: checking whether we have a device for 8: yes common-plugin-Message: checking whether we have a device for 9: yes (gnome-settings-daemon:13791): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed [1331983727,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application ** (gnome-fallback-mount-helper:1584): DEBUG: ConsoleKit session is active 0 (gnome-fallback-mount-helper:1584): Gdk-WARNING **: gnome-fallback-mount-helper: Fatal IO error 11 (???????) on X server :0. (gdu-notification-daemon:1708): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (???????) on X server :0. unity-window-decorator: Fatal IO error 11 (???????) on X server :0.0. (bluetooth-applet:1583): Gdk-WARNING **: bluetooth-applet: Fatal IO error 11 (???????) on X server :0. (nm-applet:1596): Gdk-WARNING **: nm-applet: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): IBUS-WARNING **: _connection_closed_cb: Underlying GIOStream returned 0 bytes on an async read (update-notifier:1821): Gdk-WARNING **: update-notifier: Fatal IO error 11 (???????) on X server :0. applet.py: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): Gdk-WARNING **: nautilus: Fatal IO error 11 (???????) on X server :0. Could you help me, Thanks.

  Read the article

• WCF on Windows Phone 7 (Silverlight 4)

  - by Igor Zevaka

  Has anyone been able to communicate using WCF on Windows Phone Series 7 emulator? I've been trying for the past two days and it's just happening for me. I can get a normal Silverlight control to work in both Silverlight 3 and Silverlight 4, but not the phone version. Here are two versions that I've tried: Version 1 - Using Async Pattern BasicHttpBinding basicHttpBinding = new BasicHttpBinding(); EndpointAddress endpointAddress = new EndpointAddress("http://localhost/wcf/Authentication.svc"); Wcf.IAuthentication auth1 = new ChannelFactory<Wcf.IAuthentication>(basicHttpBinding, endpointAddress).CreateChannel(endpointAddress); AsyncCallback callback = (result) => { Action<string> write = (str) => { this.Dispatcher.BeginInvoke(delegate { //Display something }); }; try { Wcf.IAuthentication auth = result.AsyncState as Wcf.IAuthentication; Wcf.AuthenticationResponse response = auth.EndLogin(result); write(response.Success.ToString()); } catch (Exception ex) { write(ex.Message); System.Diagnostics.Debug.WriteLine(ex.Message); } }; auth1.BeginLogin("user0", "test0", callback, auth1); This version breaks on this line: Wcf.IAuthentication auth1 = new ChannelFactory<Wcf.IAuthentication>(basicHttpBinding, endpointAddress).CreateChannel(endpointAddress); Throwing System.NotSupportedException. The exception is not very descriptive and the callstack is equally not very helpful: at System.ServiceModel.DiagnosticUtility.ExceptionUtility.BuildMessage(Exception x) at System.ServiceModel.DiagnosticUtility.ExceptionUtility.LogException(Exception x) at System.ServiceModel.DiagnosticUtility.ExceptionUtility.ThrowHelperError(Exception e) at System.ServiceModel.ChannelFactory`1.CreateChannel(EndpointAddress address) at WindowsPhoneApplication2.MainPage.DoLogin() .... Version 2 - Blocking WCF call Here is the version that doesn't use the async pattern. [System.ServiceModel.ServiceContract] public interface IAuthentication { [System.ServiceModel.OperationContract] AuthenticationResponse Login(string user, string password); } public class WcfClientBase<TChannel> : System.ServiceModel.ClientBase<TChannel> where TChannel : class { public WcfClientBase(string name, bool streaming) : base(GetBinding(streaming), GetEndpoint(name)) { ClientCredentials.UserName.UserName = WcfConfig.UserName; ClientCredentials.UserName.Password = WcfConfig.Password; } public WcfClientBase(string name) : this(name, false) {} private static System.ServiceModel.Channels.Binding GetBinding(bool streaming) { System.ServiceModel.BasicHttpBinding binding = new System.ServiceModel.BasicHttpBinding(); binding.MaxReceivedMessageSize = 1073741824; if(streaming) { //binding.TransferMode = System.ServiceModel.TransferMode.Streamed; } /*if(XXXURLXXX.StartsWith("https")) { binding.Security.Mode = BasicHttpSecurityMode.Transport; binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.None; }*/ return binding; } private static System.ServiceModel.EndpointAddress GetEndpoint(string name) { return new System.ServiceModel.EndpointAddress(WcfConfig.Endpoint + name + ".svc"); } protected override TChannel CreateChannel() { throw new System.NotImplementedException(); } } auth.Login("test0", "password0"); This version crashes in System.ServiceModel.ClientBase<TChannel> constructor. The call stack is a bit different: at System.Reflection.MethodInfo.get_ReturnParameter() at System.ServiceModel.Description.ServiceReflector.HasNoDisposableParameters(MethodInfo methodInfo) at System.ServiceModel.Description.TypeLoader.CreateOperationDescription(ContractDescription contractDescription, MethodInfo methodInfo, MessageDirection direction, ContractReflectionInfo reflectionInfo, ContractDescription declaringContract) at System.ServiceModel.Description.TypeLoader.CreateOperationDescriptions(ContractDescription contractDescription, ContractReflectionInfo reflectionInfo, Type contractToGetMethodsFrom, ContractDescription declaringContract, MessageDirection direction) at System.ServiceModel.Description.TypeLoader.CreateContractDescription(ServiceContractAttribute contractAttr, Type contractType, Type serviceType, ContractReflectionInfo& reflectionInfo, Object serviceImplementation) at System.ServiceModel.Description.TypeLoader.LoadContractDescriptionHelper(Type contractType, Type serviceType, Object serviceImplementation) at System.ServiceModel.Description.TypeLoader.LoadContractDescription(Type contractType) at System.ServiceModel.ChannelFactory1.CreateDescription() at System.ServiceModel.ChannelFactory.InitializeEndpoint(Binding binding, EndpointAddress address) at System.ServiceModel.ChannelFactory1..ctor(Binding binding, EndpointAddress remoteAddress) at System.ServiceModel.ClientBase1..ctor(Binding binding, EndpointAddress remoteAddress) at Wcf.WcfClientBase1..ctor(String name, Boolean streaming) at Wcf.WcfClientBase`1..ctor(String name) at Wcf.AuthenticationClient..ctor() at WindowsPhoneApplication2.MainPage.DoLogin() ... Any ideas?

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >