Search Results

Search found 2068 results on 83 pages for 'thomas stock'.

Page 76/83 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• Code casing question for private class fields

  - by user200295

  Take the following example public class Class1{ public string Prop1{ get {return m_Prop1;} set {m_Prop1 = value; } } private string m_Prop1; // this is standard private property variable name // how do we cap this variable name? While the compiler can figure out same casing // it makes it hard to read private Class2 Class2; // we camel case the parameter public Class1(Class2 class2){ this.Class2 = class2; } } Here are my stock rules The class name is capitalized (Class1) The public properties are capitalized (Prop1) The private field tied to a public property has m_ to indicate this. My coworker prefers _ There is some debate if using m_ or _ should be used at all, as it is like Hungarian notation. Private class fields are capitalized. The part I am trying to figure out is what do I do if when the Class name of a private field matches the private field name. For example, private Class2 Class2; This is confusing. If the private field name is not the same class, for example private string Name; , there isn't much issue. Or am I thinking about the issue wrong. Should my classes and private fields be named in such a way that they don't collide?

  Read the article

• Django - Weird behaviour of sessions variables with Apache

  - by Étienne Loks

  In a Menu class with Section children, each Section has an available attribute. This attribute is initialized during the instance creation. The process of getting the availability is not trivial, so I stock a Menu instance for each user in a session variable. With the Django embedded webserver this works well. But when I deploy the application on an Apache webserver I can observe a very weird behavior. Once authentified, a click on a link or a refreshment of the page and the availability of each Section seems to be forgotten (empty menu but in the log file I can see that all Sections are here) then a new refresh on the page the availability is back, a new refresh the menu disappears once again, etc. There is no cache activated on the web server. The menu is initialized in a context processor. def get_base_context(request): if 'MENU' not in request.session or \ not request.session['MENU'].childs or\ request.session['MENU'].user != request.user: _menu = Menu(request.user) _menu.init() request.session['MENU'] = _menu (...) I have no idea what could cause such a behavior. Any clue?

  Read the article

• Google Sites API - File Cabinets: Spaces and extension separator (.) are removed from file names

  - by user1299447

  We have a series of internal reports that we update regularly from our internal databases. We built an application in C# that uploads these reports to a Google Site. Everything works fine, except that the name of the file shown to the final user in the File Cabinet does not include the original spaces nor the extension separator (.) For example, Stock per warehouse.pdf is shown as : Stockperwarehousepdf Below is a simplified version of the code. private AtomEntry UploadAttachment(string filename, AtomEntry parent, string title, string description) { SiteEntry entry = new SiteEntry(); AtomCategory category = new AtomCategory(SitesService.ATTACHMENT_TERM, SitesService.KIND_SCHEME); category.Label = "attachment"; entry.Categories.Add(category); AtomLink parentLink = new AtomLink(AtomLink.ATOM_TYPE, SitesService.PARENT_REL); parentLink.HRef = parent.SelfUri; entry.Links.Add(parentLink); entry.MediaSource = new MediaFileSource(filename, MediaFileSource.GetContentTypeForFileName(filename)); entry.Content.Type = MediaFileSource.GetContentTypeForFileName(filename); entry.Title.Text= title; entry.Summary.Text = description; AtomEntry newEntry = null; newEntry = service.Insert(new Uri(makeFeedUri("content")), entry); } The key line is where the MediaFileSource object is created. Any idea of what we are missing? I've tried all sort of changes :(

  Read the article

• CSS - background-size: cover; not working in Firefox

  - by Jayant Bhawal

  body{ background-image: url("./content/site_data/bg.jpg"); background-size: cover; background-repeat: no-repeat; font-family: 'Lobster', cursive; } Check: http://demo.jayantbhawal.in on firefox browsers, NOT in widescreen mode. The code works on Chrome(Android + PC) and even the stock Android browser, but NOT Firefox(Android + PC). Is there any good alternative to it? Why is it not working anyways? Googled this issue a lot of times, but no one else seems to have this problem. Is it just me? In any case, how do I fix it? There are quite some questions on SO about it too, but none of them provide a legitimate solution, so can someone just tell me if they have background-size: cover; issues on firefox too? So basically tell me 3 things: 1. Why is it happening? 2. What is a good alternative to it? 3. Is this happening to you too? On Firefox browsers of course. Chrome Version 35.0.1916.114 m Firefox Version 29.0.1 Note: I may already be trying to fix it so at times you may see a totally weird page. Wait a bit and reload.

  Read the article

• Change Default Winform Icon Across Entire App

  - by Kyle Gagnet

  Can I change the default icon used on a Winform? Most of my forms have their icon property set to a custom icon. For the few forms that slip through the cracks, I don't want the generic "hey look, he made this in visual studio" icon. One solution is to tediously check every one of my forms to make sure they either have a custom icon set or have ShowIcon set to False. Another solution is to have every one of my forms inherit from a base class that sets a custom icon in the constructor. Aside from those solutions, what other options do I have? EDIT: I was hoping there would be a way to replace the source of the stock icon with my own. Is it in a resource file somewhere? Or is it embedded in a .NET dll that I can't (or really, really shouldn't) modify? BOUNTY EDIT: Is there a way to accomplish this without editing or writing a single line of code? I don't care how impractical, complicated, waste-of-time the solution is... I just want to know if it's possible. I need to satisfy my curiosity.

  Read the article

• How to implement a Linked List in Java?

  - by nbarraille

  Hello! I am trying to implement a simple HashTable in Java that uses a Linked List for collision resolution, which is pretty easy to do in C, but I don't know how to do it in Java, as you can't use pointers... First, I know that those structures are already implemented in Java, I'm not planning on using it, just training here... So I created an element, which is a string and a pointer to the next Element: public class Element{ private String s; private Element next; public Element(String s){ this.s = s; this.next = null; } public void setNext(Element e){ this.next = e; } public String getString(){ return this.s; } public Element getNext(){ return this.next; } @Override public String toString() { return "[" + s + "] => "; } } Of course, my HashTable has an array of Element to stock the data: public class CustomHashTable { private Element[] data; Here is my problem: For example I want to implement a method that adds an element AT THE END of the linked List (I know it would have been simpler and more efficient to insert the element at the beginning of the list, but again, this is only for training purposes). How do I do that without pointer? Here is my code (which could work if e was a pointer...): public void add(String s){ int index = hash(s) % data.length; System.out.println("Adding at index: " + index); Element e = this.data[index]; while(e != null){ e = e.getNext(); } e = new Element(s); } Thanks!

  Read the article

• BIOS upgrade lowers CPU temperature

  - by N.N.

  Setup I've got a system with an Asus P8Z68-V PRO motherboard and an Intel Core i7-2600K CPU running at stock speed (no overlocking) which I cool with a Noctua NH-U12P. On the heatsink I've got the two included fans connected via the included Low-Noise Adapters (L.N.A.) 1100 RPM, 16.9 dB(A). In the BIOS settings I've set the CPU and chassis fan profile to silent. Issue Yesterday I upgraded from BIOS version 0501 to 0606. After the upgrade I checked the temperatures in the BIOS monitor and was surprised to see that the CPU temperature was slightly ~30°C. Before the upgrade the CPU temperature was ~50°C with the same BIOS settings (see the following heading for details on temperatures). How can this be? It seems a bit odd that a BIOS upgrade can lower the CPU temperature by 20°C and it also seems odd that the CPU temperature is lower than the chassis temperature. Temperatures When I've checked temperatures the room temperature has been ~23°C. I haven't changed the placement of the computer nor the hardware or cooling setup between BIOS versions. BIOS version 0501 BIOS monitor: CPU: ~50°C Chassis: ~33°C I haven't got any temperature measures from lm-sensors or the like for version 0501 because I only discovered the issue after upgrading to version 0606 and the BIOS updater utility won't let me downgrade to version 0501 (it says "outdated image" when I try to load version 0501). BIOS version 0606 BIOS monitor: CPU: ~30°C Chassis: ~33°C lm-sensors in Ubuntu 11.04 Desktop 64-bit (sudo sensors after an uptime of 4 h 52 min and a load average of 0.22, 0.18, 0.15): coretemp-isa-0000 Adapter: ISA adapter Core 0: +32.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +35.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +29.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +36.0°C (high = +80.0°C, crit = +98.0°C) The BIOS monitor temperatures was checked directly after the lm-sensors temperatures was checked. BIOS version 0706, 0801, 1101 and 3203 I get the same kind of temperatures both in the BIOS monitor and with lm-sensors in BIOS version 0706, 0801, 1101 and 3203 as in 0606. Information from Asus The 0606 changelog mentions nothing explicitly about CPU temperature (but item 3., as indicated by sidran32, might affect temperatures): P8Z68-V PRO 0606 BIOS with IRST 10.6.0.1002 Enable the support of Intel Rapid Storage Technology version 10.6.0.1002 Release Improve DRAM compatibility Improve System stability Improve compatibility with some Raid card model Increase IGD share memory size to 512MB However the following FAQ might give a hint: FAQs I find that the CPU temperature reading in BIOS is about 10~20 degrees centigrade hotter than the reading in OS. Is it normal? Page Tools Solution That is normal as BIOS does not send idle command to the CPU, making most of the power saving features useless. You should be getting similar reading if you disable EIST/C1E/CPU C3 Report/CPU C6 Report in BIOS.

  Read the article

• Automating video generation by adding an intro and a trailing video to the main video

  - by DevDewboy

  I have a video project I am trying to compile. Here is the overview: I have many videos which are 5 minute training sessions - Main video. The Intro Video will be a standard 5 second video that will have the Video title and Author. This will be concatenated to the main video. The Trailing Video will pretty much be a stock video that will be concatenated to the main video and have all the legaleze etc. The Intro Vid will smoothly fade into the main vid as well as when you get to end of the main video it will fade into the Trailing video nicely. The product is a new video with a Intro, Main & Trailer video all in one! The concept is really that simple. In fact I found an example of a person who has solved this and is doing exactly what I want. This solution is a Bash script that takes a config file that has the title, author, etc. and generates the Intro, the Ending and creates the resulting video with them concatenated. I am using Ubuntu 12.04 Server. I have been trying to take this as a sample and just running it with no luck because of incompatibility errors. I even attempted to convert it using .MP4 containers or .MKV. I am running into error after error or incompatibility issues. I went as far as changing out the ffmpeg binary using the 25 Oct 2013 version from http://ffmpeg.gusari.org/static/64bit/ which I like as I don't have to worry about rebuilding the binary. Almost successful but again I have some error which I cannot solve. I know part of the problem is the fact that video production, codecs, formats is a completely new field for me so I am attempting to work through this new territory. Perhaps an expert here has something similar that I can use as a guideline that uses MP4 or h.264 format. Or take the solution above from the URL and make it work with a more up-to-date version of ffmpeg. I will include the script and its parameter file and the output (abbreviated because of limitation) below. Basically as the script stands right now, when run I get the error [matroska,webm @ 0x27bbee0] Read error. This error is return from the 'reasembleVideo' routine from the first ffmpeg command. The following is the Parameter File: #!/bin/bash INPUTFILE="ssh_main.mp4" LOGO="logo.png" LOGOLENGTH="1" SPEAKER="Jason" TITLE="Basic SSH Video" DATE="October 28, 2013" SCENESTART="00:00:01" SCENEDURATION="00:00:09" OUTPUTFILE="ssh_basic_1" } The following is the script I am running. The ${OUTPUTFILE} being used is a small 2 minute video I create in screen-o-matic in MP4 format. Script on PasteBin (too long for Super User post)

  Read the article

• Uninstall php and nginx or fix setup

  - by jreed121

  First off, I'm a huge linux noob - sorry... I'm trying to setup nginx with php-fpm on debian and I'm pretty sure that I've completely screwed it up. nginx seems to be running fine because I can it it from a web browser and it load the stock "Welcome to nginx!" page. I'm not so sure about php-fpm though. When I try something like # restart php-fpm I get: bash: restart: command not found First off php-fpm some how got installed as php5-fpm when I do root@server:/etc/init.d# ls, which seems to contradict every tutorial and help doc I've read (supposed to be 'php-fpm'). I can restart it with this: service php5-fpm restart And just enter the package name 'php5-fpm' I get this: root@server:~# php5-fpm [17-Nov-2012 23:15:36] NOTICE: PHP message: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/suhosin.so' - /usr/lib/php5/20100525/suhosin.so: cannot open shared object file: No such file or directory in Unknown on line 0 [17-Nov-2012 23:15:36] ERROR: An another FPM instance seems to already listen on /var/run/php5-fpm.sock [17-Nov-2012 23:15:36] ERROR: FPM initialization failed The root for nginx is /usr/share/nginx/html, when I try to navigate to a .php file in there with my web browser, it tries to download the file instead of interpret it. I would like this folder to be in my user's home directory ie: /home/administrator/www or /home/nginx/www. I know in order to do this I need to modify nginx.conf, but I find that configuration file difficult to understand. I suppose the fact that my .php scripts aren't being handled is my bigger problem anyways. When I try to see what running on port 9000 (php-fpm default port) with lsof -i :9000 it returns nothing - I guess indicating that it isn't listening. then I head over to vim /etc/php5/fpm/php-fpm.conf and there is no where to designate a port number. So should I just uninstall everything and start from scratch? If so, how do I clean it all up? Any suggestions for a tutorial once I'm ready to try again? Should I attempt to troubleshoot this mess? If so where should I start? Sorry guys, I'm feeling pretty stupid and lost right now. I'm not sure what my next steps are in trying to resolve this issue are. I realize that this is a horrible question for this type of Q&A site, but I'd really appreciate any guidance.

  Read the article

• Very poor read performance compared to write performance on md(raid1) / crypt(luks) / lvm

  - by Android5360

  I'm experiencing very poor read performance over raid1/crypt/lvm. In the same time, write speeds are about 2x+ faster on the same setup. On another raid1 setup on the same machine I get normal read speeds (maybe because I'm not using cryptsetup). OS related disks: sda + sdb. I have raid1 configuration with two disks, both are in place. I'm using LVM over the RAID. No encryption. Both disks are WD Green, 5400 rpm. IO test results on this raid1: dd if=/dev/zero of=/tmp/output.img3 bs=8k count=256k conv=fsync - 2147483648 bytes (2.1 GB) copied, 22.3392 s, 96.1 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=/tmp/output.img3 of=/dev/null bs=8k - 2147483648 bytes (2.1 GB) copied, 15.9 s, 135 MB/s And here is the problematic setup (on the same machine). Currently I have only one sdc (WD Green, 5400rpm) configured in software raid1 + crypt (luks, serpent-xts-plain) + lvm. Tomorrow I will attach another disk (sdd) to complete this two-disk raid1 setup. IO tests results on this raid1: dd if=/dev/zero of=output.img3 bs=8k count=256k conv=fsync 2147483648 bytes (2.1 GB) copied, 17.7235 s, 121 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=output.img3 of=/dev/null bs=8k 2147483648 bytes (2.1 GB) copied, 36.2454 s, 59.2 MB/s We can see that the read performance is very very bad (59MB/s compared to 135MB/s when using no encryption). Nothing is using the disks during benchmark. I can confirm this because I checked with iostat and dstat. Details on the hardware: disks: all are WD green, 5400rpm, 64mb cache. cpu: FX-8350 at stock speed ram: 4x4GB at 1066Mhz. Details on the software: OS: Debian Wheezy 7, amd64 mdadm: v3.2.5 - 18th May 2012 LVM version: 2.02.95(2) (2012-03-06) LVM Library version: 1.02.74 (2012-03-06) LVM Driver version: 4.22.0 cryptsetup: 1.4.3 Here is how I configured the slow raid1+crypt+lvm setup: parted /dev/sdc mklabel gpt type: ext4 start: 2048s end: -1 Now the raid, crypt and the lvm configuration: mdadm --create /dev/md1 --level=1 --raid-disks=2 missing /dev/sdc cryptsetup --cipher serpent-xts-plain luksFormat /dev/md1 cryptsetup luksOpen /dev/md1 md1_crypt vgcreate vg_sql /dev/mapper/md1_crypt lvcreate -l 100%VG vg_sql -n lv_sql mkfs.ext4 /dev/mapper/vg_sql-lv-sql mount /dev/mapper/vg_sql-lv_sql /sql So guys, can you help me identify the reason and fix it? It has to be something with the cryptsetup as there is no such read slowdown on the other setup (sda+sdb) where no encryption is present. But I have no idea what to do. Thanks!

  Read the article

• Best Processor for MediaSmart Server?

  - by Kent Boogaart

  I'm trying to figure out what the best possible processor is that I can stick in my HP MediaSmart server. I'm clueless when it comes to correlating CPUs to motherboards. I suspect it's the socket type I care about, but I worry that there's more to it. CPU-Z gives me (excerpt): Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 1 (max 1) Number of threads 1 (max 1) Name AMD Sempron LE-1150 Codename Sparta Specification AMD Sempron(tm) Processor LE-1150 Package Socket AM2 (940) CPUID F.F.1 Extended CPUID F.7F Brand ID 1 Core Stepping DH-G1 Technology 65 nm Core Speed 1000.0 MHz Multiplier x FSB 5.0 x 200.0 MHz HT Link speed 800.0 MHz Stock frequency 2000 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64 L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size L2 cache 256 KBytes, 16-way set associative, 64-byte line size FID/VID Control yes Max FID 10.0x Max VID 1.350 V P-State FID 0x2 - VID 0x12 (5.0x - 1.100 V) P-State FID 0xA - VID 0x0C (9.0x - 1.250 V) P-State FID 0xC - VID 0x0A (10.0x - 1.300 V) K8 Thermal sensor yes K8 Revision ID 6.0 Attached device PCI device at bus 0, device 24, function 0 Attached device PCI device at bus 0, device 24, function 1 Attached device PCI device at bus 0, device 24, function 2 Attached device PCI device at bus 0, device 24, function 3 Chipset ------------------------------------------------------------------------- Northbridge SiS 761GX rev. 02 Southbridge SiS 966 rev. 59 Graphic Interface AGP AGP Revision 3.0 AGP Transfer Rate 8x AGP SBA supported, enabled Memory Type DDR2 Memory Size 2048 MBytes Channels Single Memory Frequency 200.0 MHz (CPU/5) CAS# latency (CL) 5.0 RAS# to CAS# delay (tRCD) 5 RAS# Precharge (tRP) 5 Cycle Time (tRAS) 15 Bank Cycle Time (tRC) 21 Command Rate (CR) 1T DMI ------------------------------------------------------------------------- DMI BIOS vendor Phoenix Technologies, LTD version R03 date 05/08/2008 DMI System Information manufacturer HP product MediaSmart Server version unknown serial CN68330DGH UUID A482007B-B0CC7593-DD11736A-407B7067 DMI Baseboard vendor Wistron model SJD4 revision A.0 serial unknown DMI System Enclosure manufacturer HP chassis type Desktop chassis serial unknown DMI Processor manufacturer AMD model AMD Sempron(tm) Processor LE-1150 clock speed 2000.0 MHz FSB speed 200.0 MHz multiplier 10.0x DMI Memory Controller correction 64-bit ECC Max module size 4096 MBytes DMI Memory Module designation A0 size 2048 MBytes (double bank) DMI Memory Module designation A1 DMI Memory Module designation A2 DMI Memory Module designation A3 DMI Port Connector designation PS/2 Mouse (internal) port type Mouse Port connector PS/2 connector PS/2 DMI Port Connector designation USB0 (external) port type USB DMI Physical Memory Array location Motherboard usage System Memory correction None max capacity 16384 MBytes max# of devices 4 DMI Memory Device designation A0 format DIMM type unknown total width 64 bits data width 64 bits size 2048 MBytes DMI Memory Device designation A1 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A2 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A3 format DIMM type unknown total width 64 bits data width 64 bits How do I figure out what options I have for an upgrade?

  Read the article

• Postmaster uses excessive CPU and Disk Writes

  - by wolfcastle

  using PostgreSQL 9.1.2 I'm seeing excessive CPU usage and large amounts of writes to disk from postmaster tasks. This happens even while my application is doing almost nothing (10s of inserts per MINUTE). There are a reasonable number of connections open however. I've been trying to determine what in my application is causing this. I'm pretty newb with postgresql, and haven't gotten anywhere so far. I've turned on some logging options in my config file, and looked at connections in the pg_stat_activity table, but they are all idle. Yet each connection consumes ~ 50% CPU, and is writing ~15M/s to disk (reading nothing). I'm basically using the stock postgresql.conf with very little tweaks. I'd appreciate any advice or pointers on what I can do to track this down. Here is a sample of what top/iotop is showing me: Cpu(s): 18.9%us, 14.4%sy, 0.0%ni, 53.4%id, 11.8%wa, 0.0%hi, 1.5%si, 0.0%st Mem: 32865916k total, 7263720k used, 25602196k free, 575608k buffers Swap: 16777208k total, 0k used, 16777208k free, 4464212k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 17057 postgres 20 0 236m 33m 13m R 45.0 0.1 73:48.78 postmaster 17188 postgres 20 0 219m 15m 11m R 42.3 0.0 61:45.57 postmaster 17963 postgres 20 0 219m 16m 11m R 42.3 0.1 27:15.01 postmaster 17084 postgres 20 0 219m 15m 11m S 41.7 0.0 63:13.64 postmaster 17964 postgres 20 0 219m 17m 12m R 41.7 0.1 27:23.28 postmaster 18688 postgres 20 0 219m 15m 11m R 41.3 0.0 63:46.81 postmaster 17088 postgres 20 0 226m 24m 12m R 41.0 0.1 64:39.63 postmaster 24767 postgres 20 0 219m 17m 12m R 41.0 0.1 24:39.24 postmaster 18660 postgres 20 0 219m 14m 9.9m S 40.7 0.0 60:51.52 postmaster 18664 postgres 20 0 218m 15m 11m S 40.7 0.0 61:39.61 postmaster 17962 postgres 20 0 222m 19m 11m S 40.3 0.1 11:48.79 postmaster 18671 postgres 20 0 219m 14m 9m S 39.4 0.0 60:53.21 postmaster 26168 postgres 20 0 219m 15m 10m S 38.4 0.0 59:04.55 postmaster Total DISK READ: 0.00 B/s | Total DISK WRITE: 195.97 M/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 17962 be/4 postgres 0.00 B/s 14.83 M/s 0.00 % 0.25 % postgres: aggw aggw [local] idle 17084 be/4 postgres 0.00 B/s 15.53 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17963 be/4 postgres 0.00 B/s 15.00 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17188 be/4 postgres 0.00 B/s 14.80 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17964 be/4 postgres 0.00 B/s 15.50 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 18664 be/4 postgres 0.00 B/s 15.13 M/s 0.00 % 0.23 % postgres: aggw aggw [local] idle 17088 be/4 postgres 0.00 B/s 14.71 M/s 0.00 % 0.13 % postgres: aggw aggw [local] idle 18688 be/4 postgres 0.00 B/s 14.72 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 24767 be/4 postgres 0.00 B/s 14.93 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 18671 be/4 postgres 0.00 B/s 16.14 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 17057 be/4 postgres 0.00 B/s 13.58 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 26168 be/4 postgres 0.00 B/s 15.50 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 18660 be/4 postgres 0.00 B/s 15.85 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle

  Read the article

• Skyrim: Heavy Performance Issues after a couple of location changes

  - by Derija

  Okay, I've tried different solutions: ENB Series, removing certain mods, checking my FPS Rate, monitoring my resources, .ini tweaks. It's all just fine, I don't see what I'm missing. A couple of days ago, I bought Skyrim. Before I bought the game, I admit I had a pirated copy because my girlfriend actually wanted to buy me the game as a present, then said she didn't have enough money. Sick of waiting, I decided to buy the game by myself. The ridiculous part is, it worked better cracked than it does now uncracked. As the title suggests, after entering and leaving houses a couple of times, my performance obviously drops extremely. My build is just fine, Intel i5 quad core processor, NVIDIA GTX 560 Ti from Gigabyte, actually stock-OC, but manually downclocked to usual settings using appropriate Gigabyte software. This fixed the CTD issues I had before with both Skyrim and BF3. I have 4GB RAM. A website about Game Tweaks suggested that my HDD may be too slow. A screenshot of a Windows Performance Index sample with the subscription "This is likely to cause issues" showed the HDD with a performance index of 5.9, the exact same mine has, so I was playing with the thought to purchase an SSD instead, load games onto it that really need it like Skyrim, and hope it'd do the trick. Unfortunately, SSDs are likewise expensive, compared to "normal" HDDs... I'm really getting desperate about it. My save is gone because the patches made it impossible to load saves of the unpatched version and I already saved more than 80 times despite being only level 8, just because every time I interact with a door leading me to another location I'm scared the game will drop again. I can't even play for 30 mins straight anymore, it's just no fun at all. I've researched for a couple of days before I decided to post my question here. Any help is appreciated, I don't want to regret having bought the game... Since it actually is the best game I've played possibly for ever. Sincerely. P.S.: I don't think it's necessary to say, but still, of course I'm playing on PC. P.P.S.: After monitoring both my PC resources including CPU usage and HDD usage as well as the GPU usage, I don't see any changes even after the said event. P.P.P.S.: Original question posted here where I've been advised to ask here.

  Read the article

• Suspend only works once after full power cycle with ASUS P7P55D-E Pro

  - by John Chadwick

  This one is strange. I can't seem to get suspend working more than once per power cycle. When I say "power cycle," I mean the only way to get one proper suspend is to cut power from the power supply and boot back up cold. After the proper suspend, I get a failed suspend, and after all reboots or cold boots until power is cut, suspends fail. I'm using an ASUS P7P55D-E Pro with a Sandy Bridge Core i7, running on Ubuntu Precise repositories and UEFI. I'm running Nouveau from repository (And Gallium3d compiled from git, but that does not come into this since I can avoid OpenGL and it still happens the same way) with a GTX 285 (nv50.) I had to build a custom kernel (3.3) in order for ACPI 5.0 to be supported and make suspend work at all. I compiled it using the latest Ubuntu kernel's config file with the additional entries set to the default options. All packages are up to date. I know these are relatively exotic settings, but I'm hoping maybe I can get some help anyways. The behavior when suspend fails is strange. Upon a proper suspend, all fans turn off and the only led left on, the power led, is blinking. Upon a failed suspend, 1. USB power remains. 2. The power led stays on solid. 3. All fans seem to still be on. 4. I can hear what I believe is the primary harddrive shutting off. 5. Despite USB power remaining, the USB powered keyboard does not respond to anything, and the indicator leds on it shut off. Pressing the power button does nothing, and of course I have not to date found a way to wake it up. When trouble shooting the first round of issues I got with suspend not too long ago, I ended up building a list of modules to disable upon sleeping. Here's my config file for them: In /etc/pm/config.d/01modules: SUSPEND_MODULES="uhci_hd ehci_hd button" All of my other pm configuration files are stock. In case it's any help, here are my relevant BIOS settings. Thanks.

  Read the article

• Why is my new Phenom II 965 BE not significantly faster than my old Athlon 64 X2 4600+?

  - by Software Monkey

  I recently rebuilt my 5 year old computer. I upgraded all core components, in particular from an Athlon 64 X2 4600+ at 2.4 GHz with DDR2 800 to a Phenom II 965 BE (quad core) at 3.6 GHz with DDR3 1333 (actually 1600, but testing consistently detected memory errors at 1600). The motherboard is also much newer and better. The HDD's (x3), DVD writer and card reader are the same. The BIOS memory config is auto-everything except the base timing which I overrode to 1T instead of 2T. The BIOS CPU multiplier is slightly over-clocked to 3.6 GHz from the stock 3.4 GHz. I noticed compiling Java is slower than I expected. As it happens I have some (single-threaded) Java pattern-matching code which is CPU and memory bound and for which I have performance numbers recorded on a number of hardware platforms, including my old system. So I did a test run on the new equipment and was stunned to find that the numbers are only slightly better than my old system, about 25%. The data set it is operating on is a 148,975 character array, which should easily fit in caches, but in any event the new CPU has larger caches all around. The system was, of course, otherwise idle for the test and the test run is a timed 10 seconds to eliminate scheduling anomalies. A long while ago, when I upgraded only memory from DD2 667 to DDR2 800 there was no change in performance of this test, which subjectively supports that the test cycle does not need to (significantly) access main memory, but yes it is creating and garbage collecting a large number of objects in the process of this test (low millions of matches are found for the pattern set). I am about 99.999% certain the code hasn't changed since I last ran it on 2009-03-17 - but I can't easily retest the old hardware, because it is currently in pieces on my work-bench waiting to be built into a new computer for my kids. Note that Windows (XP) reports a CPU speed of 795 MHz unless I have some thing running. With stuff running it seems to jump all over the place each time I use ALT-Pause to display the system properties, everywhere from 795 MHz to 3.4 Ghz. So why might my shiny new hardware under-performing so badly? EDIT: The old memory was Mushkin DDR2 800 with timings set for auto which should have been 5-5-5-12. The new memory is Corsair DDR3 1600, running at 1333 with timings also auto which are 9-9-9-21. In both cases they are a paired set of dual channel DIMMs. I was waiting to ensure my system was stable before tweaking with memory timings.

  Read the article

• Ubuntu with KVM guest VM and broken bridges

  - by MadPsy

  I have an Ubuntu box with a KVM guest VM running. They use bridging so the guest VM attaches to the physical network of its host. The guest VM has 2 NICs in 2 different bridges. First NIC of the VM is tap5 and is in bridge br0 br0 8000.46720f5c572e no eth0.500 tap5 Second NIC of the VM is tap2 and is in bridge br100 br100 8000.76ad2fc96661 no eth0.100 eth0.101 eth0.103 eth0.104 eth0.105 tap2 On the host, br0 has an IP and br100 does not 21: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 46:72:0f:5c:57:2e brd ff:ff:ff:ff:ff:ff inet 192.168.100.4/24 brd 192.168.10.255 scope global br0 inet6 fe80::d6ae:52ff:febe:777/64 scope link valid_lft forever preferred_lft forever On the guest, its eth0 and eth1 interfaces both have IP addresses 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:3e:61:fb:7a:da brd ff:ff:ff:ff:ff:ff inet 192.168.100.6/24 brd 192.168.100.255 scope global eth0 inet6 fe80::23e:61ff:fefb:7ada/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:3e:61:fb:7a:ea brd ff:ff:ff:ff:ff:ff inet 172.16.50.129/25 brd 172.16.50.255 scope global eth1 inet6 fe80::23e:61ff:fefb:7aea/64 scope link valid_lft forever preferred_lft forever On the guest VM, a tcpdump of its eth1 interface (tap2) shows traffic from its eth0 interface (tap5), as if the 2 bridges are themselves bridged. This means any interface on br100 is now bridged across to br0 - which is completely broken. root@chillispot:~# tcpdump -c 1 -n -v -i eth1 net 192.168.100.0/24 tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 16:31:24.175583 IP (tos 0x0, ttl 64, id 48054, offset 0, flags [DF], proto TCP (6), length 148) 192.168.100.6.22 > 192.168.100.4.59505: Flags [P.], cksum 0x6c2b (correct), seq 1056321648:1056321744, ack 398642983, win 1700, options [nop,nop,TS val 197473436 ecr 200655363], length 96 What could be bridging the 2 bridges, except the guest VM (which is a stock Ubuntu install)? I am at a complete loss! Thanks.

  Read the article

• Anyone else experiencing high rates of Linux server crashes during a leap second day?

  - by Bron Gondwana

  POSTMORTEM Anticlimax: only thing that died was my VPN (openvpn) link to the cluster, so there was an exciting few seconds while it re-established. Everything else was fine. Starting back ntp everywhere. If you look at Marco's blog at http://my.opera.com/marcomarongiu/blog/2012/06/01/an-humble-attempt-to-work-around-the-leap-second - he has a solution for phasing the time change over 24 hours using ntpd -x to avoid the 1 second skip. Give that a go if it matters to you. For the systems I run, the jump isn't a problem. Just today, Sat June 30th - starting soon after the start of the day GMT. We've had a handful of blades in different datacentres as managed by different teams all go dark - not responding to pings, screen blank. They're all running Debian Squeeze - with everything from stock kernel to custom 3.2.21 builds. Most are Dell M610 blades, but I've also just lost a Dell R510 and other departments have lost machines from other vendors too. There was also an older IBM x3550 which crashed and which I thought might be unrelated, but now I'm wondering. The one crash which I did get a screen dump from said: [3161000.864001] BUG: spinlock lockup on CPU#1, ntpd/3358 [3161000.864001] lock: ffff88083fc0d740, .magic: dead4ead, .owner: imapd/24737, .owner_cpu: 0 Unfortunately the blades all supposedly had kdump configured, but they died so hard that kdump didn't trigger - and they had console blanking turned on. I've disabled console blanking now, so fingers crossed I'll have more information after the next crash. Just want to know if it's a common thread or "just us". It's really odd that they're different units in different datacentres bought at different times and run by different admins (I run the FastMail.FM ones)... and now even different vendor hardware. Most of the machines which crashed had been up for weeks/months and were running 3.1 or 3.2 series kernels. The most recent crash was a machine which had only been up about 6 hours running 3.2.21. THE WORKAROUND Ok people, here's how I worked around it. disabled ntp: /etc/init.d/ntp stop created http://linux.brong.fastmail.fm/2012-06-30/fixtime.pl (code stolen from Marco, see blog posts in comments) ran fixtime.pl without an argument to see that there was a leap second set ran fixtime.pl with an argument to remove the leap second NOTE: depends on adjtimex. I've put a copy of the squeeze adjtimex binary at http://linux.brong.fastmail.fm/2012-06-30/adjtimex - it will run without dependencies on a squeeze 64 bit system. If you put it in the same directory as fixtime.pl, it will be used if the system one isn't present. Obviously if you don't have squeeze 64 bit... find your own. I'm going to start ntp again tomorrow. As an anonymous user suggested - an alternative to running adjtimex is to just set the time yourself, which will presumably also clear the leapsecond counter.

  Read the article

• Radeon HD4850 serious issues when using DirectX 10

  - by ricsmania

  Hello, I have a problem with my video card. Whenever I run a DirectX 10 game, it works for a few seconds (10 or so) and then starts displaying nothing but big polygons. I have tested this with Crysis and Resident Evil 5, both have the same problems. The same games running under DirectX 9 work fine, except for some small black squares once in a while. I have the following specs: Asus P7P55D LE Intel Core i5 750 Sapphire Radeon HD4850 1GB 2x2GB Patriot Viper II Sector 5, DDR3 1600 MHz OCZ Stealth X Stream 500SXS 500W At first I thought it could be the video card overheating (it has stock cooling), but the game crashes even when it's running at 50 degrees C, and it's never been higher than 70. I also thought it could be the PSU, but as far as I know 500W is enough for this computer, especially because I haven't overclocked anything. My OS is Windows 7 X64 and I am using Catalyst 10.10, but I have also tried many older versions with no success. I don't think there is a problem with the card itself, or else it wouldn't run DirectX 9 games I believe. I have spent many hours searching for a solution but I couldn't, so any help is appreciated. Thank you. EDIT: I did some further investigation about the problem, and it seems taspeotis was right, it might be related to memory. I slightly underclocked the memory from 993 to 965 MHz and the problem went away completely. Both the black squares using DirectX 9 and the weird polygons using DirectX 10. I was using RE DirectX 10 Benchmark, as it consistently crashed around the same point, and now I can play the full benchmark with no artifacts at all. Unfortunately, the underclock has an obvious hit in performance. Although it's not critical, it's definitely noticeable. So, if the video memory test software showed no erros, but the card needs an underclock to work, what might be the problem? Temperature? Voltage? By the way, I couldn't find what the default voltage for this card is. And what is a good software to try and increase it? I tried Ati Tray Tools but it has a bug that increases the clock speed dramatically whenever I change something in the Overclock tab, so I'm afraid it might fry my card. Worst case scenario, if I don't find I solution I will try to slightly increase the GPU clock to compensate for the memory clock. Thank you again.

  Read the article

• Broadcom HT1100 SATA controller not working properly with 1TB drives

  - by Jeff C

  I've been using RHEL distro's for several years and always managed to find the answers until now. I know this is more of a hardware issue, but I've been working on this for over a week and trust Linux and the IT community to help more then HP. I have CentOS 6.3 installed on an HP ProLiant DL145 G3 server with the BroadCom HT1100 IO controller and ServerWorks SATA Controller MMIO BIOS v3.0.0015.6 Firmware. This controller does not support large drives fully. Here's what I've tried and the results; Stock setup - Freezes on the ServerWorks POST screen. Can't even enter CMOS without disconnecting the drives. If I simply disconnect the SATA cables before it gets to the ServerWorks screen and reconnect afterwards I can boot from a CD, USB, PXE fine. However fiddling with cables at ever boot isn't practical. If I enter the BIOS config I can set it to not try booting the drives but leave the controller enabled. This lets me boot normally but the drives are not visible in the OS (live CDs or USB installed). I used method #2 to install and update CentOS. I have the /boot partition on a USB drive (everything else is on the SATA drives in software RAID1) hoping that would work around the issue but I get this Kernel panic - not syncing:Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-279.9.1.el6.x86_6 #1 Call Trace: [<ffffffff814fd6ba>] ? panic+0xa0/0x168 [<ffffffff81070c22>] ? do_exit+0x862/0x870 [<ffffffff8117cdb5>] ? fput+0x25/0x30 [<ffffffff81070c88>] ? do_group_exit+0x58/0xd0 [<ffffffff81070d17>] ? sys_exit_group+0x17/0x20 [<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b panic occured, switching back to text console I'm sure it should be possible to talk to the drives without the BIOS boot check since the BIOS doesn't see them in method #2 either, their disconnected when it checks, but Linux sees them fine. If anyone could help figure out how I would greatly appreciate it! The other possible option I've come across is a complex firmware update. Tyan has a few boards on their website with the HT1100 and a ServerWorks v3.0.0015.7 update which says "adds support for TB drives" in the release notes. If someone could help me get the Tyan SATA firmware into the HP ROM file so I could just reflash that would also be very much appreciated. Thanks for any help you guys can offer!

  Read the article

• I have been told to accept one error with Memtest86+

  - by DustByte

  Bought a new computer back in August with 4x4 GB RAM. Had problems with the RAM. They sent me four new sticks, which also generated errors. Singled out four sticks (from the eight I now had) that didn't generate any errors. Discovered by coincident a new RAM error last week (this time no BSOD). Contacted the company. According to them there have been issues with a bad stock from last summer so I got two tested 8 GB sticks sent to me. Been running Memtest86+ over the weekend. After 20 hours I got an error (see attached photo). The test has now been running for 37 hours but so far only this one error. I contacted the company where I bought the computer. They wrote back: I wouldn't worry about hat one fail. We have had similar situations here whereby it passes numerous times but then fails once. We think it's an issue with memtest, after all memory is faulty or it isn't so you can't really have it pass a few times, fail the next time around and then pass again! Please trust me on this and continue with the memory we sent you and if your problems continue we'll look at getting it replaced again. I gather from other forum posts that many people do not accept a single error. What could this single error signify, faulty RAM or a glitch in the MEMTEST program (or other)? Update: From the helpful comments below I conclude that an occasional (and rare) "random" error could occur and be acceptable, but repeated errors at the same address would indicate malfunction. Memtest has now run for 45 hours and I still have only one error. For everyone's information, I will keep running the test. In less than two days I am going away for a month. I will most likely leave Memtest running. As I do not have a UPS there is a risk that a power outage will ruin the experiment. The computer is a desktop so I cannot bring it with me (which would curiously have exposed it to more cosmic rays as I will be flying ;)).

  Read the article

• What else can I do to secure my Linux server?

  - by eric01

  I want to put a web application on my Linux server: I will first explain to you what the web app will do and then I will tell you what I did so far to secure my brand new Linux system. The app will be a classified ads website (like gumtree.co.uk) where users can sell their items, upload images, send to and receive emails from the admin. It will use SSL for some pages. I will need SSH. So far, what I did to secure my stock Ubuntu (latest version) is the following: NOTE: I probably did some things that will prevent the application from doing all its tasks, so please let me know of that. My machine's sole purpose will be hosting the website. (I put numbers as bullet points so you can refer to them more easily) 1) Firewall I installed Uncomplicated Firewall. Deny IN & OUT by default Rules: Allow IN & OUT: HTTP, IMAP, POP3, SMTP, SSH, UDP port 53 (DNS), UDP port 123 (SNTP), SSL, port 443 (the ones I didn't allow were FTP, NFS, Samba, VNC, CUPS) When I install MySQL & Apache, I will open up Port 3306 IN & OUT. 2) Secure the partition in /etc/fstab, I added the following line at the end: tmpfs /dev/shm tmpfs defaults,rw 0 0 Then in console: mount -o remount /dev/shm 3) Secure the kernel In the file /etc/sysctl.conf, there are a few different filters to uncomment. I didn't know which one was relevant to web app hosting. Which one should I activate? They are the following: A) Turn on Source Address Verification in all interfaces to prevent spoofing attacks B) Uncomment the next line to enable packet forwarding for IPv4 C) Uncomment the next line to enable packet forwarding for IPv6 D) Do no accept ICMP redirects (we are not a router) E) Accept ICMP redirects only for gateways listed in our default gateway list F) Do not send ICMP redirects G) Do not accept IP source route packets (we are not a router) H) Log Martian Packets 4) Configure the passwd file Replace "sh" by "false" for all accounts except user account and root. I also did it for the account called sshd. I am not sure whether it will prevent SSH connection (which I want to use) or if it's something else. 5) Configure the shadow file In the console: passwd -l to lock all accounts except user account. 6) Install rkhunter and chkrootkit 7) Install Bum Disabled those services: "High performance mail server", "unreadable (kerneloops)","unreadable (speech-dispatcher)","Restores DNS" (should this one stay on?) 8) Install Apparmor_profiles 9) Install clamav & freshclam (antivirus and update) What did I do wrong and what should I do more to secure this Linux machine? Thanks a lot in advance

  Read the article

• PeopleSoft Upgrades, Fusion, & BI for Leading European PeopleSoft Applications Customers

  - by Mark Rosenberg

  With so many industry-leading services firms around the globe managing their businesses with PeopleSoft, it’s always an adventure setting up times and meetings for us to keep in touch with them, especially those outside of North America who often do not get to join us at Oracle OpenWorld. Fortunately, during the first two weeks of May, Nigel Woodland (Oracle’s Service Industries Director for the EMEA region) and I successfully blocked off our calendars to visit seven different customers spanning four countries in Western Europe. We met executives and leaders at four Staffing industry firms, two Professional Services firms that engage in consulting and auditing, and a Financial Services firm. As we shared the latest information regarding product capabilities and plans, we also gained valuable insight into the hot technology topics facing these businesses. What we heard was both informative and inspiring, and I suspect other Oracle PeopleSoft applications customers can benefit from one or more of the following observations from our trip. Great IT Plans Get Executed When You Respect the Users Each of our visits followed roughly the same pattern. After introductions, Nigel outlined Oracle’s product and technology strategy, including a discussion of how we at Oracle invest in each layer of the “technology stack” to provide customers with unprecedented business management capabilities and choice. Then, I provided the specifics of the PeopleSoft product line’s investment strategy, detailing the dramatic number of rich usability and functionality enhancements added to release 9.1 since its general availability in 2009 and the game-changing capabilities slated for 9.2. What was most exciting about each of these discussions was that shortly after my talking about what customers can do with release 9.1 right now to drive up user productivity and satisfaction, I saw the wheels turning in the minds of our audiences. Business analyst and end user-configurable tools and technologies, such as WorkCenters and the Related Action Framework, that provide the ability to tailor a “central command center” to the exact needs of each recruiter, biller, and every other role in the organization were exactly what each of our customers had been looking for. Every one of our audiences agreed that these tools which demonstrate a respect for the user would finally help IT pole vault over the wall of resistance that users had often raised in the past. With these new user-focused capabilities, IT is positioned to definitively partner with the business, instead of drag the business along, to unlock the value of their investment in PeopleSoft. This topic of respecting the user emerged during our very first visit, which was at Vital Services Group at their Head Office “The Mill” in Manchester, England. (If you are a student of architecture and are ever in Manchester, you should stop in to see this amazingly renovated old mill building.) I had just finished explaining our PeopleSoft 9.2 roadmap, and Mike Code, PeopleSoft Systems Manager for this innovative staffing company, said, “Mark, the new features you’ve shown us in 9.1/9.2 are very relevant to our business. As we forge ahead with the 9.1 upgrade, the ability to configure a targeted user interface with WorkCenters, Related Actions, Pivot Grids, and Alerts will enable us to satisfy the business that this upgrade is for them and will deliver tangible benefits. In fact, you’ve highlighted that we need to start talking to the business to keep up the momentum to start reviewing the 9.2 upgrade after we get to 9.1, because as much as 9.1 and PeopleTools 8.52 offers, what you’ve shown us for 9.2 is what we’ve envisioned was ultimately possible with our investment in PeopleSoft applications.” We also received valuable feedback about our investment for the Staffing industry when we visited with Hans Wanders, CIO of Randstad (the second largest Staffing company in the world) in the Netherlands. After our visit, Hans noted, “It was very interesting to see how the PeopleSoft applications have developed. I was truly impressed by many of the new developments.” Hans and Mike, sincere thanks for the validation that our team’s hard work and dedication to “respecting the users” is worth the effort! Co-existence of PeopleSoft and Fusion Applications Just Makes Sense As a “product person,” one of the most rewarding things about visiting customers is that they actually want to talk to me. Sometimes, they want to discuss a product area that we need to enhance; other times, they are interested in learning how to extract more value from their applications; and still others, they want to tell me how they are using the applications to drive real value for the business. During this trip, I was very pleased to hear that several of our customers not only thought the co-existence of Fusion applications alongside PeopleSoft applications made sense in theory, but also that they were aggressively looking at how to deploy one or more Fusion applications alongside their PeopleSoft HCM and FSCM applications. The most common deployment plan in the works by three of the organizations is to upgrade to PeopleSoft 9.1 or 9.2, and then adopt one of the new Fusion HCM applications, such as Fusion Performance Management or the full suite of  Fusion Talent Management. For example, during an applications upgrade planning discussion with the staffing company Hays plc., Mark Thomas, who is Hays’ UK IT Director, commented, “We are very excited about where we can go with the latest versions of the PeopleSoft applications in conjunction with Fusion Talent Management.” Needless to say, this news was very encouraging, because it reiterated that our applications investment strategy makes good business sense for our customers. Next Generation Business Intelligence Is the Key to the Future The third, and perhaps most exciting, lesson I learned during this journey is that our audiences already know that the latest generation of Business Intelligence technologies will be the “secret sauce” for organizations to transform business in radical ways. While a number of the organizations we visited on the trip have deployed or are deploying Oracle Business Intelligence Enterprise Edition and the associated analytics applications to provide dashboards of easy-to-understand, user-configurable metrics that help optimize business performance according to current operating procedures, what’s most exciting to them is being able to use Business Intelligence to change the way an organization does business, grows revenue, and makes a profit. In particular, several executives we met asked whether we can help them minimize the need to have perfectly structured data and at the same time generate analytics that improve order fulfillment decision-making. To them, the path to future growth lies in having the ability to analyze unstructured data rapidly and intuitively and leveraging technology’s ability to detect patterns that a human cannot reasonably be expected to see. For illustrative purposes, here is a good example of a business problem where analyzing a combination of structured and unstructured data can produce better results. If you have a resource manager trying to decide which person would be the best fit for an assignment in terms of ensuring (a) client satisfaction, (b) the individual’s satisfaction with the work, (c) least travel distance, and (d) highest margin, you traditionally compare resource qualifications to assignment needs, calculate margins on past work with the client, and measure distances. To perform these comparisons, you are likely to need the organization to have profiles setup, people ranked against profiles, margin targets setup, margins measured, distances setup, distances measured, and more. As you can imagine, this requires organizations to plan and implement data setup, capture, and quality management initiatives to ensure that dependable information is available to support resourcing analysis and decisions. In the fast-paced, tight-budget world in which most organizations operate today, the effort and discipline required to maintain high-quality, structured data like those described in the above example are certainly not desirable and in some cases are not feasible. You can imagine how intrigued our audiences were when I informed them that we are ready to help them analyze volumes of unstructured data, detect trends, and produce recommendations. Our discussions delved into examples of how the firms could leverage Oracle’s Secure Enterprise Search and Endeca technologies to keyword search against, compare, and learn from unstructured resource and assignment data. We also considered examples of how they could employ Oracle Real-Time Decisions to generate statistically significant recommendations based on similar resourcing scenarios that have produced the desired satisfaction and profit margin results. --- Although I had almost no time for sight-seeing during this trip to Europe, I have to say that it may have been one of the most energizing and engaging trips of my career. Showing these dedicated customers how they can give every user a uniquely tailored set of tools and address business problems in ways that have to date been impossible made the journey across the Atlantic more than worth it. If any of these three topics intrigue you, I’d recommend you contact your Oracle applications representative to arrange for more detailed discussions with the appropriate members of our organization.

  Read the article

• Fragmented Log files could be slowing down your database

  - by Fatherjack

  Something that is sometimes forgotten by a lot of DBAs is the fact that database log files get fragmented in the same way that you get fragmentation in a data file. The cause is very different but the effect is the same – too much effort reading and writing data. Data files get fragmented as data is changed through normal system activity, INSERTs, UPDATEs and DELETEs cause fragmentation and most experienced DBAs are monitoring their indexes for fragmentation and dealing with it accordingly. However, you don’t hear about so many working on their log files. How can a log file get fragmented? I’m glad you asked. When you create a database there are at least two files created on the disk storage; an mdf for the data and an ldf for the log file (you can also have ndf files for extra data storage but that’s off topic for now). It is wholly possible to have more than one log file but in most cases there is little point in creating more than one as the log file is written to in a ‘wrap-around’ method (more on that later). When a log file is created at the time that a database is created the file is actually sub divided into a number of virtual log files (VLFs). The number and size of these VLFs depends on the size chosen for the log file. VLFs are also created in the space added to a log file when a log file growth event takes place. Do you have your log files set to auto grow? Then you have potentially been introducing many VLFs into your log file. Let’s get to see how many VLFs we have in a brand new database. USE master GO CREATE DATABASE VLF_Test ON ( NAME = VLF_Test, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test.mdf', SIZE = 100, MAXSIZE = 500, FILEGROWTH = 50 ) LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 5MB, MAXSIZE = 250MB, FILEGROWTH = 5MB ); go USE VLF_Test go DBCC LOGINFO; The results of this are firstly a new database is created with specified files sizes and the the DBCC LOGINFO results are returned to the script editor. The DBCC LOGINFO results have plenty of interesting information in them but lets first note there are 4 rows of information, this relates to the fact that 4 VLFs have been created in the log file. The values in the FileSize column are the sizes of each VLF in bytes, you will see that the last one to be created is slightly larger than the others. So, a 5MB log file has 4 VLFs of roughly 1.25 MB. Lets alter the CREATE DATABASE script to create a log file that’s a bit bigger and see what happens. Alter the code above so that the log file details are replaced by LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 1GB, MAXSIZE = 25GB, FILEGROWTH = 1GB ); With a bigger log file specified we get more VLFs What if we make it bigger again? LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 5GB, MAXSIZE = 250GB, FILEGROWTH = 5GB ); This time we see more VLFs are created within our log file. We now have our 5GB log file comprised of 16 files of 320MB each. In fact these sizes fall into all the ranges that control the VLF creation criteria – what a coincidence! The rules that are followed when a log file is created or has it’s size increased are pretty basic. If the file growth is lower than 64MB then 4 VLFs are created If the growth is between 64MB and 1GB then 8 VLFs are created If the growth is greater than 1GB then 16 VLFs are created. Now the potential for chaos comes if the default values and settings for log file growth are used. By default a database log file gets a 1MB log file with unlimited growth in steps of 10%. The database we just created is 6 MB, let’s add some data and see what happens. USE vlf_test go -- we need somewhere to put the data so, a table is in order IF OBJECT_ID('A_Table') IS NOT NULL DROP TABLE A_Table go CREATE TABLE A_Table ( Col_A int IDENTITY, Col_B CHAR(8000) ) GO -- Let's check the state of the log file -- 4 VLFs found EXECUTE ('DBCC LOGINFO'); go -- We can go ahead and insert some data and then check the state of the log file again INSERT A_Table (col_b) SELECT TOP 500 REPLICATE('a',2000) FROM sys.columns AS sc, sys.columns AS sc2 GO -- insert 500 rows and we get 22 VLFs EXECUTE ('DBCC LOGINFO'); go -- Let's insert more rows INSERT A_Table (col_b) SELECT TOP 2000 REPLICATE('a',2000) FROM sys.columns AS sc, sys.columns AS sc2 GO 10 -- insert 2000 rows, in 10 batches and we suddenly have 107 VLFs EXECUTE ('DBCC LOGINFO'); Well, that escalated quickly! Our log file is split, internally, into 107 fragments after a few thousand inserts. The same happens with any logged transactions, I just chose to illustrate this with INSERTs. Having too many VLFs can cause performance degradation at times of database start up, log backup and log restore operations so it’s well worth keeping a check on this property. How do we prevent excessive VLF creation? Creating the database with larger files and also with larger growth steps and actively choosing to grow your databases rather than leaving it to the Auto Grow event can make sure that the growths are made with a size that is optimal. How do we resolve a situation of a database with too many VLFs? This process needs to be done when the database is under little or no stress so that you don’t affect system users. The steps are: BACKUP LOG YourDBName TO YourBackupDestinationOfChoice Shrink the log file to its smallest possible size DBCC SHRINKFILE(FileNameOfTLogHere, TRUNCATEONLY) * Re-size the log file to the size you want it to, taking in to account your expected needs for the coming months or year. ALTER DATABASE YourDBName MODIFY FILE ( NAME = FileNameOfTLogHere, SIZE = TheSizeYouWantItToBeIn_MB) * – If you don’t know the file name of your log file then run sp_helpfile while you are connected to the database that you want to work on and you will get the details you need. The resize step can take quite a while This is already detailed far better than I can explain it by Kimberley Tripp in her blog 8-Steps-to-better-Transaction-Log-throughput.aspx. The result of this will be a log file with a VLF count according to the bullet list above. Knowing when VLFs are being created By complete coincidence while I have been writing this blog (it’s been quite some time from it’s inception to going live) Jonathan Kehayias from SQLSkills.com has written a great article on how to track database file growth using Event Notifications and Service Broker. I strongly recommend taking a look at it as this is going to catch any sneaky auto grows that take place and let you know about them right away. Hassle free monitoring of VLFs If you are lucky or wise enough to be using SQL Monitor or another monitoring tool that let’s you write your own custom metrics then you can keep an eye on this very easily. There is a custom metric for VLFs (written by Stuart Ainsworth) already on the site and there are some others there are very useful so take a moment or two to look around while you are there. Resources MSDN – http://msdn.microsoft.com/en-us/library/ms179355(v=sql.105).aspx Kimberly Tripp from SQLSkills.com – http://www.sqlskills.com/BLOGS/KIMBERLY/post/8-Steps-to-better-Transaction-Log-throughput.aspx Thomas LaRock at Simple-Talk.com – http://www.simple-talk.com/sql/database-administration/monitoring-sql-server-virtual-log-file-fragmentation/ Disclosure I am a Friend of Red Gate. This means that I am more than likely to say good things about Red Gate DBA and Developer tools. No matter how awesome I make them sound, take the time to compare them with other products before you contact the Red Gate sales team to make your order.

  Read the article

• Week in Geek: IPv6 Capable Smartphones Compromise User Privacy Edition

  - by Asian Angel

  This week we learned how to “clone a disk, resize static windows, and create system function shortcuts”, use 45 different services, sites, and apps to help read favorite sites, add MP3 support to Audacity (for saving in MP3 format), install a Wii game loader for easy backups and fast load times, create a Blue Screen of Death in any color, and more. Photo by legofenris. Weekly News Links Photo by The H Security. IPv6: Smartphones compromise users’ privacy Since version 4 of the iOS operating system, Apple’s iPhones, iPads and iPods have been capable of handling IPv6, and most Android devices have been capable since version 2.1. However, the operating systems transfer an ID that discloses information about their users. Dumb phones can be attacked too Much of the discussion of security threats to mobile phones revolves around smartphones, but researchers have found that less advanced “feature phones,” still used by the majority of people around the world, also are vulnerable to attack. SCADA exploit – the dragon awakes The recent publication of an exploit for KingView, a software package for visualising industrial process control systems, appears to be having an effect. Threatpost reports that both the Chinese vendor Wellintech and Chinese CERT (CN-CERT) have now reacted. Sophos: Spam to get more malicious Spam is becoming more malicious in nature as trickery tactics change in line with current user interests, according to a new report released Tuesday by Sophos. Global spam traffic rebounds as Rustock wakes Spam is on the rise after the Rustock botnet awoke from its Christmas slumber, according to Symantec. Cracking WPA keys in the cloud At the forthcoming Black Hat conference, blogger Thomas Roth plans to demonstrate how weak WPA PSKs can be cracked quickly and easily using Amazon’s Elastic Compute Cloud (EC2) service. Microsoft Security Advisory: Vulnerability in Internet Explorer could allow remote code execution Provides a link to more details about the vulnerability and shows a work-around/fix for the problem. Adobe plans to make it easier to delete Flash cookies in web browsers The new API, NPAPI:ClearSiteData, will allow Flash cookies – also known as Local Shared Objects (LSO) – to be deleted directly in the browser’s settings. Firefox beta getting new database standard The ninth beta version of Firefox is set to get support for a standard called IndexedDB that provides a database interface useful for offline data storage and other tasks needing information on a browser’s computer. MetroPCS accused of blocking certain Net content MetroPCS is violating the FCC’s recently approved Net neutrality rules by blocking certain Internet content, say several public interest groups. Server and Tools chief Muglia to leave Microsoft in summer 2011 Microsoft veteran and Server & Tools Business (STB) President Bob Muglia is leaving Microsoft, according to an email that CEO Steve Ballmer sent to employees on January 10. Report: DOJ nearing decision on Google-ITA The U.S. Department of Justice is gearing up for a possible formal antitrust investigation into whether or not Google should be allowed to purchase travel software company ITA Software, according to a report. South Korea says Google Street View broke law Police in South Korea reportedly say Google broke the country’s law when its Street View service captured personal data from unsecure Wi-Fi networks. The backlash over Google’s HTML5 video bet Choosing strategies based on what you believe to be long-term benefits is generally a good idea when running a business, but if you manage to alienate the world in the process, the long term may become irrelevant. Google answers critics on HTML5 Web video move Google responded to critics of its decision to drop support for a popular HTML5 video codec by declaring that a royalty-supported standard for Web video will hold the Web hostage. Random TinyHacker Links A Special GiveAway: a Great Book & Great Security Software The team from 7 Tutorials has a special giveaway running during the month of January. Signed copies of their latest book, full 1-year licenses of BitDefender Internet Security 2011 and free 3-month trials for everyone willing to participate. One Click Rooting For Android Phones Here’s a nice tool that helps you root your Android phone effortlessly. New Angry Birds Free version 1.0 Available in the App Store. Google Code University Learn programming at Google Code University. Capture and Share Your Favorite Part Of a YouTube Video SnipSnip.it lets you share only the part of the video that you like. Super User Questions More great questions and answers from this past week’s popular topics at Super User. What are the Windows A: and B: drives used for? Does OS X support linux-like features? What is the easiest way to make a backup of an entire hard disk? Will shifting from Wireless to Wired network result in better performance? Is it legal to install Windows 7 Home Premium Retail inside VMware virtual machine? How-To Geek Weekly Article Recap Enjoy reading through our hottest articles from this past week. The 50 Best Ways to Disable Built-in Windows Features You Don’t Want The Best of CES (Consumer Electronics Show) in 2011 How to Upgrade Windows 7 Easily (And Understand Whether You Should) The Worst of CES (Consumer Electronics Show) in 2011 The How-To Geek Guide to Audio Editing: Basic Noise Removal One Year Ago on How-To Geek More great articles from one year ago filled with helpful geeky goodness for you to enjoy. Share Text & Images the Easy Way with JustPaste.it Start Portable Firefox in Safe Mode Firefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible Extensions Protect Your Computer from “Little Hands” with KidSafe Lock Prying Eyes Out of Your Minimized Windows Custom Crocheted Cylon-Cthulhu Hybrid What happens when you let your Cylon Centurion figure and your crocheted Cthulhu spend too many lonely nights together? A Cylon-Cthulhu hybrid, of course! You can get your own from the Cthulhu Chick store over on Etsy. Note: This is not an ad…Ruth is a friend of ours, and this Cylon-Cthulhu hybrid makes the perfect guard for the new MVP trophy in our office. The Geek Note Whether it is a geeky indoor project or just getting outside, we hope that you and your families have a terrific fun-filled weekend! Remember to keep sending those great tips in to us at [email protected]. Photo by qwrrty. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

  Read the article

• Pre-rentrée Oracle Open World 2012 : à vos agendas

  - by Eric Bezille

  A maintenant moins d'un mois de l’événement majeur d'Oracle, qui se tient comme chaque année à San Francisco, fin septembre, début octobre, les spéculations vont bon train sur les annonces qui vont y être dévoilées... Et sans lever le voile, je vous engage à prendre connaissance des sujets des "Key Notes" qui seront tenues par Larry Ellison, Mark Hurd, Thomas Kurian (responsable des développements logiciels) et John Fowler (responsable des développements systèmes) afin de vous donner un avant goût. Stratégie et Roadmaps Oracle Bien entendu, au-delà des séances plénières qui vous donnerons  une vision précise de la stratégie, et pour ceux qui seront sur place, je vous engage à ne pas manquer les séances d'approfondissement qui auront lieu dans la semaine, dont voici quelques morceaux choisis : "Accelerate your Business with the Oracle Hardware Advantage" avec John Fowler, le lundi 1er Octobre, 3:15pm-4:15pm "Why Oracle Softwares Runs Best on Oracle Hardware" , avec Bradley Carlile, le responsable des Benchmarks, le lundi 1er Octobre, 12:15pm-13:15pm "Engineered Systems - from Vision to Game-changing Results", avec Robert Shimp, le lundi 1er Octobre 1:45pm-2:45pm "Database and Application Consolidation on SPARC Supercluster", avec Hugo Rivero, responsable dans les équipes d'intégration matériels et logiciels, le lundi 1er Octobre, 4:45pm-5:45pm "Oracle’s SPARC Server Strategy Update", avec Masood Heydari, responsable des développements serveurs SPARC, le mardi 2 Octobre, 10:15am - 11:15am "Oracle Solaris 11 Strategy, Engineering Insights, and Roadmap", avec Markus Flier, responsable des développements Solaris, le mercredi 3 Octobre, 10:15am - 11:15am "Oracle Virtualization Strategy and Roadmap", avec Wim Coekaerts, responsable des développement Oracle VM et Oracle Linux, le lundi 1er Octobre, 12:15pm-1:15pm "Big Data: The Big Story", avec Jean-Pierre Dijcks, responsable du développement produits Big Data, le lundi 1er Octobre, 3:15pm-4:15pm "Scaling with the Cloud: Strategies for Storage in Cloud Deployments", avec Christine Rogers,  Principal Product Manager, et Chris Wood, Senior Product Specialist, Stockage , le lundi 1er Octobre, 10:45am-11:45am Retours d'expériences et témoignages Si Oracle Open World est l'occasion de partager avec les équipes de développement d'Oracle en direct, c'est aussi l'occasion d'échanger avec des clients et experts qui ont mis en oeuvre  nos technologies pour bénéficier de leurs retours d'expériences, comme par exemple : "Oracle Optimized Solution for Siebel CRM at ACCOR", avec les témoignages d'Eric Wyttynck, directeur IT Multichannel & CRM  et Pascal Massenet, VP Loyalty & CRM systems, sur les bénéfices non seulement métiers, mais également projet et IT, le mercredi 3 Octobre, 1:15pm-2:15pm "Tips from AT&T: Oracle E-Business Suite, Oracle Database, and SPARC Enterprise", avec le retour d'expérience des experts Oracle, le mardi 2 Octobre, 11:45am-12:45pm "Creating a Maximum Availability Architecture with SPARC SuperCluster", avec le témoignage de Carte Wright, Database Engineer à CKI, le mercredi 3 Octobre, 11:45am-12:45pm "Multitenancy: Everybody Talks It, Oracle Walks It with Pillar Axiom Storage", avec le témoignage de Stephen Schleiger, Manager Systems Engineering de Navis, le lundi 1er Octobre, 1:45pm-2:45pm "Oracle Exadata for Database Consolidation: Best Practices", avec le retour d'expérience des experts Oracle ayant participé à la mise en oeuvre d'un grand client du monde bancaire, le lundi 1er Octobre, 4:45pm-5:45pm "Oracle Exadata Customer Panel: Packaged Applications with Oracle Exadata", animé par Tim Shetler, VP Product Management, mardi 2 Octobre, 1:15pm-2:15pm "Big Data: Improving Nearline Data Throughput with the StorageTek SL8500 Modular Library System", avec le témoignage du CTO de CSC, Alan Powers, le jeudi 4 Octobre, 12:45pm-1:45pm "Building an IaaS Platform with SPARC, Oracle Solaris 11, and Oracle VM Server for SPARC", avec le témoignage de Syed Qadri, Lead DBA et Michael Arnold, System Architect d'US Cellular, le mardi 2 Octobre, 10:15am-11:15am "Transform Data Center TCO with Oracle Optimized Servers: A Customer Panel", avec les témoignages notamment d'AT&T et Liberty Global, le mardi 2 Octobre, 11:45am-12:45pm "Data Warehouse and Big Data Customers’ View of the Future", avec The Nielsen Company US, Turkcell, GE Retail Finance, Allianz Managed Operations and Services SE, le lundi 1er Octobre, 4:45pm-5:45pm "Extreme Storage Scale and Efficiency: Lessons from a 100,000-Person Organization", le témoignage de l'IT interne d'Oracle sur la transformation et la migration de l'ensemble de notre infrastructure de stockage, mardi 2 Octobre, 1:15pm-2:15pm Echanges avec les groupes d'utilisateurs et les équipes de développement Oracle Si vous avez prévu d'arriver suffisamment tôt, vous pourrez également échanger dès le dimanche avec les groupes d'utilisateurs, ou tous les soirs avec les équipes de développement Oracle sur des sujets comme : "To Exalogic or Not to Exalogic: An Architectural Journey", avec Todd Sheetz - Manager of DBA and Enterprise Architecture, Veolia Environmental Services, le dimanche 30 Septembre, 2:30pm-3:30pm "Oracle Exalytics and Oracle TimesTen for Exalytics Best Practices", avec Mark Rittman, de Rittman Mead Consulting Ltd, le dimanche 30 Septembre, 10:30am-11:30am "Introduction of Oracle Exadata at Telenet: Bringing BI to Warp Speed", avec Rudy Verlinden & Eric Bartholomeus - Managers IT infrastructure à Telenet, le dimanche 30 Septembre, 1:15pm-2:00pm "The Perfect Marriage: Sun ZFS Storage Appliance with Oracle Exadata", avec Melanie Polston, directeur, Data Management, de Novation et Charles Kim, Managing Director de Viscosity, le dimanche 30 Septembre, 9:00am-10am "Oracle’s Big Data Solutions: NoSQL, Connectors, R, and Appliance Technologies", avec Jean-Pierre Dijcks et les équipes de développement Oracle, le lundi 1er Octobre, 6:15pm-7:00pm Testez et évaluez les solutions Et pour finir, vous pouvez même tester les technologies au travers du Oracle DemoGrounds, (1133 Moscone South pour la partie Systèmes Oracle, OS, et Virtualisation) et des "Hands-on-Labs", comme : "Deploying an IaaS Environment with Oracle VM", le mardi 2 Octobre, 10:15am-11:15am "Virtualize and Deploy Oracle Applications in Minutes with Oracle VM: Hands-on Lab", le mardi 2 Octobre, 11:45am-12:45pm (il est fortement conseillé d'avoir suivi le "Hands-on-Labs" précédent avant d'effectuer ce Lab. "x86 Enterprise Cloud Infrastructure with Oracle VM 3.x and Sun ZFS Storage Appliance", le mercredi 3 Octobre, 5:00pm-6:00pm "StorageTek Tape Analytics: Managing Tape Has Never Been So Simple", le mercredi 3 Octobre, 1:15pm-2:15pm "Oracle’s Pillar Axiom 600 Storage System: Power and Ease", le lundi 1er Octobre, 12:15pm-1:15pm "Enterprise Cloud Infrastructure for SPARC with Oracle Enterprise Manager Ops Center 12c", le lundi 1er Octobre, 1:45pm-2:45pm "Managing Storage in the Cloud", le mardi 2 Octobre, 5:00pm-6:00pm "Learn How to Write MapReduce on Oracle’s Big Data Platform", le lundi 1er Octobre, 12:15pm-1:15pm "Oracle Big Data Analytics and R", le mardi 2 Octobre, 1:15pm-2:15pm "Reduce Risk with Oracle Solaris Access Control to Restrain Users and Isolate Applications", le lundi 1er Octobre, 10:45am-11:45am "Managing Your Data with Built-In Oracle Solaris ZFS Data Services in Release 11", le lundi 1er Octobre, 4:45pm-5:45pm "Virtualizing Your Oracle Solaris 11 Environment", le mardi 2 Octobre, 1:15pm-2:15pm "Large-Scale Installation and Deployment of Oracle Solaris 11", le mercredi 3 Octobre, 3:30pm-4:30pm En conclusion, une semaine très riche en perspective, et qui vous permettra de balayer l'ensemble des sujets au coeur de vos préoccupations, de la stratégie à l'implémentation... Cette semaine doit se préparer, pour tailler votre agenda sur mesure, à travers les plus de 2000 sessions dont je ne vous ai fait qu'un extrait, et dont vous pouvez retrouver l'ensemble en ligne.

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >