Search Results

Search found 2866 results on 115 pages for 'benjamin dell'.

Page 77/115 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Can't install Ubuntu using Wubi on a Windows dynamic disk [closed]

  - by Tharindu

  Possible Duplicate: I can't able to install ubuntu alongside with Win7 ..: When I try to install ubuntu 12.04 - 64 bit alongside win 7 prof. 64 bit it generated the following error. How could I proceed without having this? I - An error occurred: Error executing command command= C:\Windows\sysnative\bcdedt.exe /set {1 bO4672f-5969-11)-a75c-d3d3Od877b8O} device partition= F: retval=1 stderr=An error has occurred setting the element data. The request is not supported. stdout For more information, please see the log file c\users\dell\appdata\local\temp\wubi-12.04

  Read the article

• Is it possible to update my graphic card drivers?

  - by madmaxpt

  This is what the lspci -v command shows in the VGA compatible controller section: 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: Dell Device 048e Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f0200000 (32-bit, non-prefetchable) [size=512K] I/O ports at 18d0 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f0000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 i915 is only compatible with OpenGL 1.4 and cannot use shaders and I'd like to use some Open GL 2.0 functionalities. Is it possible to update the drivers or is my hardware limited to OpenGL 1.4 ?

  Read the article

• Ubuntu 12.04 GNOME Terminal (3.4.1.1) Xorg 100% CPU

  - by EaZ

  after upgrading Ubuntu 11.04 to 12.04 (x64 arch) maximizing or resizing GNOME Terminal (3.4.1.1) windows larger cause the Xorg (1.11.3) or X process to utilize 100% CPU. Resizing smaller, moving windows or minimizing do not seem to have the same impact but by no means are snappy either. I'm running on a Dell E6500 laptop (upgraded from 11.04) running the nvidia proprietary drivers v. 295.49 (Quadro NVS 160M) with compiz 0.9.7.8. Other terminals such as xterm/uxterm are unaffected. Hoping it has to do with some configuration settings but not sure where to look (nvidia/compiz/gnome/X?). Thanks!

  Read the article

• Touchpad doesn't work after logging in

  - by Vamsi Emani

  The touchpad of my laptop fails to work soon after I login to Ubuntu. I;ve gone through several threads in forums regarding the same and have tried out : gconftool -set boolean ... command I;ve even tried to reboot the system in recovery mode, also I;ve unchecked the System - Preferences - enable touchpad while key type and restarted. None of the above methods which did work for few seem to work for me. Please help me. How can I fix the touchpad issue in Ubuntu 11.10 without a reinstall? I am using 64 bit Oneiric, on Dell Inspiron

  Read the article

• in ubuntu 12.04 how may i know if my devices have it's driver installed??

  - by Aldo

  i have a dell N4110 laptop, and i want to know if the driver is installed and working well, something like the device manager in windows , or another way to know if a device is driverless or if the device might have a better driver, like my mousepad, in windows it have multi-touch gestures , that scrolls or zoom with two fingers (like an ipod) but in ubuntu it just works the right part as a scroll bar, so maybe it is installed one driver, but i need other one that uses well my devices. and the grphics card, i have not idea if it is well installed or isn't. i have a Intel 3000hd graphics card. thank you for your time. have a nice day people! =D

  Read the article

• Menu to let me choose OS to run in a dual boot machine

  - by user1145905

  I recently re-imaged my Dell PC to dual-install Windows 7 and Ubuntu 12.04.1 LTS. The dual-boot was a success, since I was able to start whichever OS I wanted. Now, I installed some software (the OpenJDK package) on the Ubuntu side of the PC. Upon restarting Ubuntu, I unfortunately lost the ability to choose the OS that I wanted to run (i.e., Ubuntu). Ordinarily, I'd expect to: 1. Hit the power button 2. A menu (Grub?) shows up listing all OSs installed in the PC (namely, Win7 and Ubuntu) 3. Choose which OS I want and hit enter. bingo. The problem is that I don't see that menu (step 2 above). Instead, windows automatically starts, even when I hit F12 to see the boot options, none of which I understand. Your help would be great! Thanks! - Kiptoo

  Read the article

• How do I change local display resolution via SSH?

  - by krumble1

  I have a machine running Ubuntu Server 12.04 LTS and I'm having problems with the local monitor. The Dell flat panel I'm using only displays this message while the computer running: "Cannot Display This Video Mode" and then the information: "Optimum resolution 1280x1024 60Hz". I'm fairly new to using an operating system wholly via command line but I'm learning fast. :) I can access the server fine via SSH so using it is not a problem. However, for where it is positioned at the moment, it would be much more convenient to use the computer locally. I'm just wondering how to change the local screen resolution via SSH to something usable by my monitor. Thanks for your time! BTW: I have also tried switching displays and I still have the same problem. Also BTW: I tried putting in the xrandr command and all I get back is: Can't open display

  Read the article

• Why is using an external USB drive or USB printer causing my system to hang?

  - by thepd

  I am having some troubles using various external hard drives and my printer, all of which I connect using USB. The majority of the time, when I connect either of these devices, my system freezes up completely after about 10 minutes. They work just fine prior to that moment. I've also not noticed any problems using a USB mouse. I'm running Ubuntu 10.10 and have tried using a newer kernel (a 2.6.36 Maverick kernel from the kernel ppa, as opposed to the default 2.6.35 one) to no avail. I'm using a Dell Studio XPS 16 (M1647) which is a sort of newish laptop and so my guess is this is probably some kind of driver bug. Is there anyway to debug these sorts of issues? I've looked through some of my logs (/var/log/messages seemed the most useful) but haven't been able to find any kind of USB related logging nor anything interesting happening prior to the hang.

  Read the article

• Ubuntu 14.04 compiz thumbnails preview flicker

  - by HockeyBum

  Ubuntu 14.04.1 x64 (upgraded from 12.04) with Unity desktop Dell Latitude with NVIDIA GF119M (NVS 4200M) - Optimus is DISABLED Using NVIDIA legacy binary driver 304.117 When I set the CCSM option to allow thumbnail previews, the thumbnail 'flickers' for about 1 second before the actual thumbnail image is displayed. I don't think I had this enabled under 12.04 so not sure if it's version-specific. Should I be using a different driver (there are newer ones - Ubu shows NVIDIA binary driver 331.38 and the non-proprietary nouveau, plus NVIDIA has newer ones at the site)? TIA!

  Read the article

• Can't install Ubuntu 13.04

  - by Beaker1210

  I am trying to install Ubuntu 13.04 on a Dell Mini 10 that is currently running Qimo. I want to replace the old operating system entirely. When I turn on the computer and boot from the USB stick it brings up a black screen that says: Boot: I have no idea where to go from here. I created the bootable USB stick using Universal USB installer. I've used the same process for installing Ubuntu on other machines in the past have never had this issue. Thanks in advance for the help. :)

  Read the article

• Audio output and input stopped working after the last update

  - by renatov

  I'm using Ubuntu 14.04 and everything was perfect until todays's update. Now my audio output (speakers) and input (microphone) stopped working. I guess it's a driver issue, but I need help to debug this problem and to solve it. I have a Dell Inspiron 5421 notebook with an Intel audio integrated sound card: $ lspci | grep Audio 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) If I go to Ubuntu Settings Sound Output, it doesn't show my Intel card there anymore: The same for the Input tab, it doesn's show my Intel card there anymore: Could you please help me?

  Read the article

• Why is the font spacing on some websites broken?

  - by user950731

  I am using Ubuntu 12.04 on a Dell Studio 15 and so far am really impressed. I could not find a solution for my problem by googling. The fonts on some websites do not have proper spacing. they overlap and are very hard to read that way. I am using the Ubuntu standard fonts and have not changed them after installing. Here is a screencap that shows my problem. The problem occurs in Firefox and Chrome the same way, and on the same websites. Thanks for your help. Best regards el

  Read the article

• Booting but not rebooting from external USB hard drive, what could be the problem?

  - by user8276

  I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

  Read the article

• Ubuntu 10.10 booting but not rebooting from external USB hard drive, what could be the problem?

  - by user8276

  I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

  Read the article

• Is there a way to force lubuntu screen resolution?

  - by za1

  I have a Dell Inspiron 4000, 900 Mhz Pentium III, 192 MB RAM,10.1 GB disk running Lubuntu 12.04. When I start the computer, and I check the display resolution, Monitor Settings claims that the max resolution is 1024x768. I then connected another monitor I had lying around, rebooted, and now the laptop monitor looks normal,and monitor settings claims that 1280x1024 is the max resolution (it is) and the other monitor doesn't turn on. (black screen) The external monitor is not broken. Is there a way to, without the external monitor, force the laptop monitor resolution to 1280x1024? (The following is another question) - How can you run commands automatically at startup? Specifically "xinput 18 118 0" (without quotes) The first question is important, I can live with typing the second one at every boot. Thanks

  Read the article

• Flashing screen hovering over menubar on left side

  - by iwekb

  Just installed Ubuntu 10.10 netbook version on an older Dell Laptop (no other operating system installed). When hovering with mouse over menu bar, the full screen changes to default coloured back ground shortly and then back to normal (as after start-up) again. And that each time the mouse is over any of the (default) icons on the menu bar. I am not able to select any icon. No left or right click works on icons or anywhere on the menubar apart from the left top small icon, white Ubuntu logo, and the right top small icons for WiFi, sound, mail, shut-down etc. Those icons work. I tried re-installation again and all patches are downloaded. Same problem. Problem is that I can't enter commands either to reduce e.g. the swappiness (if that would be of any help). Can somebody help me that encountered similar problem or knows a resolution?

  Read the article

• How do I do a B43 Legacy install on Ubuntu 11.10?

  - by Gozzy

  I recently installed ubuntu onto an extra hard drive and everything booted correctly. However, my Linksys wireless card is not working. I went though all the forums and walk throughs and I know that I need to install the b43 legacy firmware to get the card to work. When I try to install the files, I keep getting the message in Terminal saying "No such file or directory" for every file i need to run. It's Ubuntu 11.10 on a dell optiplex gx280. Also, the "pool" file that is supposed to be on the file system is not there

  Read the article

• Suggestions to Purchase a System76 Ubuntu Pre-Installed Laptop

  - by user2956795

  I am looking to buy a new laptop that well supports Ubuntu, and recently came across the Ubuntu laptop manufactured by System76. I am not familiar with this brand although it seems to me they produce Ubuntu laptop with good performance. The price listed on their website is also not that expensive as compared with a MacBook Pro, or ThinkPad T series, or the Dell XPS Developer Edition Has anyone used System76 Ubuntu Laptop? I'd like to ask for your opinions. How is the experience. Is it worth to put the money on?

  Read the article

• How do I get a Broadcom BCM4313 wireless card working?

  - by viky

  I upgraded Ubuntu from 11.10 to 12.04, until which wireless was working just fine. After the upgrade and reboot, wireless is not even being detected (When I click the network manager icon in the top panel, it does not show the wireless networks. Neither the Enable wireless option is there). But my laptop's LED indicator shows wireless is on. This is a Dell Vostro 3450 laptop with: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)** (from lspci). Is any other info needed? How do I get Wifi working?

  Read the article

• Why does installing 11.10 or 12.04 on old laptops fail?

  - by Adam

  I recently reimaged my Lenovo t400 with Ubuntu. However, after wiping two other systems (Compaq Presario 2100 and Dell Latitude D600) both hUbuntu 11.10 and Ubuntu 12.04 fail to load on boot. I am concerned that there is some type of issue using Ubuntu on these older systems as every part of the process has been repeated/attempted several times in the same manner as practiced in the successful load of the newer Lenovo t400. I now have two laptops without an operating system as the discs/thumb drives that were formatted to load on these devices do not seem to work. I would appreciate any assistance that you may be able to provide. Regards, -Adam

  Read the article

• Trouble with Graphics Settings

  - by user291775

  I recently tried to install Ubuntu 14 Lts alongside Windows XP pro on my 2005 dell dimension E510. Everything appeared to be working correctly until I tried to log in, at which point it froze with a blank color background, which would flicker to black every other time I hit a key or clicked the mouse. I then tried booting in graphical safe mode at which point it told me that it could not configure the graphics settings. Does any body know what's going on. Thank you for any suggestions.

  Read the article

• How do I reset my display settings from the command line?

  - by Trevor

  I'm running 12.10 on a dell e5400 laptop and I used xrandr to get the dual monitors working that I connect through a laptop dock. I used xrandr again to switch back to the laptop display when I undocked. The problem is, after a restart, the laptop seems to want to come back up with the dual monitor configuration and the laptop screen stays blank. I can boot into single user mode but I'm not sure what to do from there to get the display settings reset. Any ideas? There's no xorg.conf file so I'm not sure where the settings are stored anymore. Thanks.

  Read the article

• How to use only intel graphics and power off radeon?

  - by luizrogeriocn

  I've been using Linux for quite a while in everyday computing and programming. But now i got this new laptop with amazing battery life on windows which runs pretty cool even while gaming. But for some reason on Ubuntu I get like 1/3 battery life and it gets hot even while browsing the web. I have the proprietary drivers for radeon, but I'm thinking about upgrading from Ubuntu 12.04 to 14.04, and I would like to know how can I use only the Intel graphics and have radeon always turned off? Since I do not need the discrete graphics on Ubuntu and I'm pretty sure my problem is related to the radeon sucking up my battery and generating heat. My laptop technical specifications are: Dell latitude 3540 Intel core i7 4500U (with Intel hd4400 graphics ) Ati Radeon HD 8850m with 2GB GDDR5 VRAM 8 GB DDR3L @1600mhz Toshiba 256gb SSD Ubuntu 12.4.3 If you need any additional info, please tell me :)

  Read the article

• How to force GNOME panels et. al. to display on a different monitor without mirroring?

  - by GrueKun

  So, I recently purchased a new 23" monitor for my PC. However, I can't use it with the PC currently as I am waiting on a replacement heatsink. In the mean time, I wanted to use it with my Dell laptop. I hooked it up to the VGA port, and it seems to be working properly. However, I wanted to know if there was a way I could move all of the main display elements over to the attached monitor? I wanted to shut the LCD panel off on the laptop and hook it up like a desktop. Relevant specs: Ubuntu 10.10 x64 Intel graphics chipset The attached monitor is currently set as the default monitor. Any suggestions are welcome. :)

  Read the article

• Logitech Wireless Keyboard & mouse not working aftesr upgrade to 12.04?

  - by deerjay99

  I upgraded my Dell Dimension 9200C to 12.04 Precise Pangolin with no issues, I ran it fine for a night but when I went back in a couple days later my Logitech Wireless Keyboard K350 and M510 mouse weren't active when booted. I can boot into an older version from the main the boot screen the mouse and keyboard work, but the network stack is gone. It says the networking manager on this version is not compatible. I'm scratching my head, it isn't the mouse and keyboard, they work fine on my dual boot, and they load fine in Knoppix. They did work fine on 12.04 for 1 night. Open to suggestions before I re-install completely.

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >