Search Results

Search found 3087 results on 124 pages for 'chi ping lee'.

Page 77/124 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • KVM-Guests can't get past bridge - no internet connection

    - by tmn29a
    I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

    Read the article

  • Double default gateway ubuntu server

    - by Elena
    I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

    Read the article

  • Unable to access router even though internet works

    - by Tom Kaufmann
    I had access to my router and my internet was also working fine, but I was trying to do a port forward of 80 to my local machine and in the process I made a mistake. I went into Remote Management and for port 80 there were a few options like LAN, WAN, All. I accidently clicked "all" and then clicked "Disable". The problem is that I am no more able to access my router using 192.168.1.1, although my internet works. If I do a ping 192.168.1.1 I am able to receive the response, but I am no longer able to browse the internet. How can I fix this issue? I am using a zyxel p-660hn-t1a router given by my ISP.

    Read the article

  • network timeout how to analyse problem

    - by elhombre
    In the last three month I was experiencing that my internet connection started to get very slow and websites had long time to load. The first thing I made was an ping to www.google.com which showed that I was loosing pakets. Here some of the results: 64 bytes from 74.125.39.103: icmp_seq=2909 ttl=53 time=48.222 ms Request timeout for icmp_seq 2910 Request timeout for icmp_seq 2911 64 bytes from 74.125.39.103: icmp_seq=2912 ttl=53 time=44.372 ms Days later I had to reset my router because it wasn't able to establish a correct network connection. It was after the reset when things worked again for some days. But later the same network timeouts started to happen again. I would like to know how I can analyze the problem to get to the source which is causing this timeouts. Which steps do you take to circle in this Problem? My Network Laptop - Wireless Router modem - ISP EDIT: I am on a Mac OS X 10.6

    Read the article

  • Oracle Installation issue on Oracle Linux 6.4

    - by Pradhyoth
    I am trying to install Oracle 11g(11.2.0.1.0) on Oracle Linux 6.4(Remote Server). I get the following error(s) when Database Configuration Assistant is running ORA-01092: ORACLE instance terminated Disconnection forced ORA-48210: Relation Not Found Can someone help me regarding this errors, I cant seem to find what exactly that I have to do to solve this issue. I have done the same install on Oracle Linux 5.7 but never faced this issue before. The only problem while installing(which happens on 5.7 too) is that the required packages fail, but upon checking, it seems much higher versions are already installed. Also I cant do a yum update because the system seems to have connectivity issues with public-yum.oracle.com as I cant ping it(even though the IP Address gets resolved)

    Read the article

  • Scheduled task to map a network drive runs, but doesn't map the drive

    - by bikefixxer
    I have a task set up to run whenever the computer is logged onto that deletes all network folders and maps a network drive. Here is what is in the batch file: @echo off net use * /delete /y net use b: \\Server\Share /user:DOMAIN\Username password exit When the computer is restarted or logged off and back on, the task runs fine (according to the scheduled tasks window saying when it ran last) but the mapped drive doesn't show up. I'll open the command prompt and type "net use" and it simply says "There are no entries in the list". If I then right click on the task and run it, it works and the mapped drive shows up. I've checked the log and nothing shows up. I've tried adding a timer in the batch file so it waits 10 seconds (ping 1.1.1.1 -n 1 -w 10000nul) thinking that maybe the network wasn't connected, but that didn't work. What else can I try? Thanks!

    Read the article

  • Windows XP computer can't see Windows 7 shares

    - by Alex Brault
    I am building a network containing notably a laptop running XP and a computer running Windows 7. Both computer have shared folders and the 7 has a shared printer, to which another laptop running 7 is able to print. If I attempt to see the laptop's network shares on the PC, everything works perfectly: I am able to see and enter the folders. The reverse operation however doesn't work. Xp doesn't see the Windows 7 PC. Other things to note: As mentioned above, another Windows 7 computer is able to see the printer and I can ping both computers from either PC. Both computers are in the same workgroup named ALLAITEMENT Password-protected shares are turned off on the PC. The 7 Computer uses 40/56 bit encryption The Windows XP laptop has SP3

    Read the article

  • Incredibly high latency for Ubuntu guest on Hyper-V

    - by Mark Henderson
    I've got several Ubuntu 10.04 virtual machines running as Hyper-V guests on Windows Server 2008 R2 SP1 and they're all perfectly fine. Today I installed my first Ubuntu 11.10 virtual machine and I'm seeing rediculous pings: These servers are all connected via gigabit to a local LAN, with almost no network traffic at all1, with a legacy network adapter in Hyper-V. I'm a bit of an Ubuntu n00b so I don't really know where to go from here. Any ideas? free -m reports: total used free shared buffers cached Mem: 485 470 15 0 63 299 -/+ buffers/cache: 107 378 Swap: 507 20 487 This is within a few mb of our other Ubuntu servers that are on 10.04. I removed the Legacy NIC and installed a Synthetic one in Hyper-V and this did improve the numbers, in that they're around 10-30ms now, but I would still be expecting <1ms response times. 1As a comparison, I have another Ubuntu 10.04 guest on Hyper-V almost 1,000km away that has a ping of 33ms

    Read the article

  • inconsistent ERRORLEVEL in a batch file

    - by Doron
    In a batch file, I have an inconsistent errorlevel behavior: The IP address 10.1.1.2 always replies. The following code always gives errorlevel 0 in one location (somewhere in the middle - exactly where i need it) inside the batch file. I copied only this snippet and placed it in the beginning and at the end of the batch file. In those locations, the result is always 1. Here is the code snippet: ping 10.1.1.2|Findstr /I /C:"timed out" /C:"host unreachable" echo %errorlevel% Any idea how to make it work also in the middle of the file? What am I doing wrong? I would hate to solve it with GOTOs(to the end of the file and back to where I need the result.)

    Read the article

  • HP DL580 G5 Hyper-V networking problem

    - by mr-perfect
    Hi I have installed the hyper-v role on a DL580 G5 cluster. The host operating system is a server 2008 x64 patched to the maximum. Everything has gone fine, but if I install a guest operating system, actually a windows server 2008 x64 I can't reach the network from it. It send many packets, but don't received any, so I can't ping the external network as well. I have installed the latest drivers to the server and unintalled the network configuration utility from the physical server, but no luck. I added a legacy adapter to the guest binded to the same phisycal adapter on the host machine but it can't help Any idea welcome...

    Read the article

  • IPv6 local address in hosts file

    - by Dan
    I have set up a local domain on my Apache server. Then I added the following line in my /etc/hosts file ::1 exampledomain.local After I trying to navigate to it, (I tried Firefox and Chromium) I got a server not found error. Then I tried ping6 and it worked: dan@danny:~$ ping6 exampledomain.local PING exampledomain.local(exampledomain.local) 56 data bytes 64 bytes from exampledomain.local: icmp_seq=1 ttl=64 time=0.032 ms If I replace ::1 with 127.0.0.1 in my hosts file, it works fine. I'm not sure if this is relevant but this is my Virtual Host configuration in Apache2: <VirtualHost *:80> ServerAlias exampledomain.local DocumentRoot /home/dan/sites/exampledomain <Directory /home/dan/sites/exampledomain> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/exampledomain-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel debug CustomLog ${APACHE_LOG_DIR}/exampledomain-access.log combined </VirtualHost> My question is: How can I make it work with the IPv6 address?

    Read the article

  • Make Apache to listen in multiple IPs

    - by Enrique Becerra
    Hi I'm in a big LAN, which is behind a proxy/firewall I'm working with an apache/php/mysql application, which is hosted in a small server besides my workstation. This server is connected to the LAN also and is behind the proxy: The server has a local IP assigned: 10.64.x.x Also, this server has a public IP assigned (or redirected from within the proxy/firewall) which is: 200.41.x.x I can't access public IP from LAN, but I can ping to the public IP from outside the building How should I configure Apache to listen also for public IP and open the 80 port for people accessing from outside the building?. It is set now to Listen 10.64.x.x:80 Thanks a lot in advance,

    Read the article

  • Rsyslog mail module not working

    - by Henry-Nicolas Tourneur
    Hi *, I would like to email snort alerts from my Debian Lenny fw. Syslog is sending log messages from the firewalls to a central rsyslog. On my central rsyslog, I got something like : $ModLoad ommail $ActionMailSMTPServer server.company.local $ActionMailFrom [email protected] $ActionMailTo [email protected] $ActionExecOnlyOnceEveryInterval 1 $template mailSubject,"[SNORT] Alert from %hostname%" $template mailBody,"Snort message\r\nmsg='%msg%'" $ActionMailSubject mailSubject if $msg regexp 'snort[[0-9]]: [[0-9]:[0-9]:[0-9]].*' then ommail:;mailBody But I doesn't get any mails, I even can trigger snort with something like ping -s 1400, it logs things like following but still no mail ! 2010-01-08T09:25:58+00:00 Hostname snort[4429]: [1:499:4] ICMP Large ICMP Packet [Classification: Potentially Bad Traffic] [Priority: 2]: {ICMP} ip_dest - ip_src Any idea ?

    Read the article

  • Accessing IPv6 router interface from a minimal Fedora installation?

    - by Zack
    I've recently installed Fedora 16 and am trying to set up a simple apache server. The only problem I've run into so far is that I'm unable to access my router's web interface from any box on my network. It assigns addresses via dhcp, and the router always responds to a ping. The server is also picking up an IP from the router on the proper subnet. Now, all I really need to do is forward a port, however I am receiving "Unable to connect" through the web interfaces and "connection refused" via telnet. What are my options, and how might I go about troubleshooting this? Will I need the server's ip to be static in order to change these settings? The router is a "Netopia" model, if that helps.

    Read the article

  • Unable to resolve hostname on a proxy network

    - by ali
    I can browse sites using firefox configured with proxy 172.1.6.0.6:3128 resolv.conf domain pudhcp.ac.in search pudhcp.ac.in nameserver 172.16.0.7 I checked with Windows and I found the same DNS server settings 127.0.0.1 bt 127.0.1.1 bt Above is the hosts file I modified the top line from localhost to bt still not working bt is the hostname Still I can't ping to google.com - it is showing unable to resolv hostname I tried all solutions,I guess proxy is used even for DNS resolution root@bt:~# dhclient There is already a pid file /var/run/dhclient.pid with pid 7157 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/eth1/5c:ac:4c:b1:0c:7c Sending on LPF/eth1/5c:ac:4c:b1:0c:7c Listening on LPF/eth0/60:eb:69:18:4d:3d Sending on LPF/eth0/60:eb:69:18:4d:3d Sending on Socket/fallback DHCPREQUEST of 172.16.6.87 on eth0 to 255.255.255.255 port 67 DHCPACK of 172.16.6.87 from 172.16.6.1 bound to 172.16.6.87 -- renewal in 79432 seconds.

    Read the article

  • CentOS running inside VMware as WebServer times out on outside connection

    - by Tom Hart
    I have a CentOS machine running inside VMware, and I have got PHP and Apache set up on it, so if I open a browser (on the VM) and go to either localhost, or 192.168.0.3, I get a phpinfo page I made in /var/www/html/index.php, but, if on the host (Windows 7), in my browser I go to 192.168.0.3, it times out. I can ping the IP address from Windows and get a response, I just can't through the browser. Does anyone have any ideas what I need to do to get this working? This is my first time using a VM and I'm getting lost in the network settings.

    Read the article

  • Can't connect to a machine via Cisco VPN on Mac

    - by Alex
    Hi there, I have a curious problem. I can connect to work's vpn using Cisco VPN Client. I can get internet through that vpn. When I go check the IP online it tells me the IP address of the server I connected. However, when I try to ping one of the machines at work I get nothing. And traceroute says there is no route to the destination. But works for google. Any ideas? Is some traffic not sent through the VPN on mac Alex

    Read the article

  • workstation 7 and host-only no connectivity

    - by Steff
    hello, I have a WinXP 32 host (IBM T400) with VWware workstation 7 (7.0.1 build-227600) and some guest OS (Win xp, NT, etc.) I can ping from the host to guest OS and vice versa, but... every other "protocols" do not work at all. No http from host to guest, no CIFS, nothing, nothing, nothing. Windows firewall is turned off, TCP/IP filer is turned off. i re-installed VMware workstation, then the networking started working again, but, after some reboots... it stopped again. Connectivity among guest OS... it works FINE. Can not understand... problems exist just between host and guest. Host-only or NAT... it is the same. Any suggestion?

    Read the article

  • psloggedon timeout question

    - by user60707
    I have a list of machine names from my network that I have put in a batchfile to run through the list and show me who is logged onto each. psloggedon \machineA psloggedon \machineB psloggedon \machineC psloggedon \machineD psloggedon \machineE psloggedon \machineF Psloggedon works fine, however when it hits a machine that isnt actually on the network, it hangs for a good 30 - 60 seconds before moving onto the next machine...I was just wondering if there was any way to speed this up so that if it hits a machine that isnt on the network, it moves onto the next machine in the list much quicker. I have read in other places that this could be possible by adding a ping -n loop into the command but im not sure how to get that to work? any ideas guys? Many thanks in advance. Jimmy

    Read the article

  • workstation 7 and host-only no connectivity

    - by Steff
    hello, I have a WinXP 32 host (IBM T400) with VWware workstation 7 (7.0.1 build-227600) and some guest OS (Win xp, NT, etc.) I can ping from the host to guest OS and vice versa, but... every other "protocols" do not work at all. No http from host to guest, no CIFS, nothing, nothing, nothing. Windows firewall is turned off, TCP/IP filer is turned off. i re-installed VMware workstation, then the networking started working again, but, after some reboots... it stopped again. Connectivity among guest OS... it works FINE. Can not understand... problems exist just between host and guest. Host-only or NAT... it is the same. Any suggestion?

    Read the article

  • Why do the IP addresses randomly change?

    - by GiddyUpHorsey
    I have a network with the following: Cable modem with static IP address Router Desktop - Win 7 VM Host - VMware ESXi 4.0 A couple of VM Guests - Windows Every now and then my Win 7 PC is unable to access some of the VMs. When I ping the VMs by their domain name their IP address shows up as the IP address of the cable modem. Sometimes I can fix it by running ipconfig /flushdns. The IP address will reset back to what it was supposed to be, but occasionally it wont work. Why does this happen and how can I fix it?

    Read the article

  • Internet Connection Sharing/FTP issues

    - by SirSkidmore
    I am currently using a Linux Mint desktop along with a Windows 8 netbook running Internet Connection Sharing to my desktop. On my desktop, I can't access FTP sites, but my laptop can, so I think it might be a porting issue. I can ping the server from Mint, so I know it's up and running, but I can't access it via telnet. On my Windows 8 netbook, I have every protocol checked, including FTP. Originally, the FTP server indicated that "Scotty" (my netbook) was hosting the service, so I tried inputting the IP of my router, 192.168.1.1 to no avail. Any ideas?

    Read the article

  • Email sent from server with rDNS & SPF being blocked by Hotmail

    - by Canadaka
    I have been unable to send email to users on hotmail or other Microsoft email servers for some time. Its been a major headache trying to find out why and how to fix the issue. The emails being sent that are blocked from my domain canadaka.net. I use Google Aps to host my regular email serverice for my @canadaka.net email addresses. I can sent email from my desktop or gmail to a hotmail without any problem. But any email sent from my server on behalf of canadaka.net is blocked, not even arriving in the junk email. The IP that the emails are being sent from is the same IP that my site is hosted on: 66.199.162.177 This IP is new to me since August 2010, I had a different IP for the previous 3-4 years. This IP is not on any credible spam lists http://www.anti-abuse.org/multi-rbl-check-results/?host=66.199.162.177 The one list spamcannibal.org my IP is listed on seems to be out of my control, says "no reverse DNS, MX host should have rDNS - RFC1912 2.1". But since I use Google for my email hosting, I don't have control over setting up RDNS for all the MX records. I do have Reverse DNS setup for my IP though, it resolves to "mail.canadaka.net". I have signed up for SNDS and was approved. My ip says "All of the specified IPs have normal status." Sender Score: 100 https://www.senderscore.org/lookup.php?lookup=66.199.162.177&ipLookup.x=55&ipLookup.y=14 My Mcafee threat level seems fine I have a TXT SPF record setup, I am currently using xname.org as my DNS, and they don't have a field for SPF, but their FAQ says to add the SPF info as a TXT entry. v=spf1 a include:_spf.google.com ~all Some "SPF checking" tools ive used detect that my domain has a valid SPF, but others don't. Like Microsoft's SPF wizard, i think this is because its specifically looking for an SPF record and not in the TXT. "No SPF Record Found. A and MX Records Available". From my home I can run "nslookup -type=TXT canadaka.net" and it returns: Server: google-public-dns-a.google.com Address: 8.8.8.8 Non-authoritative answer: canadaka.net text = "v=spf1 a include:_spf.google.com ~all" One strange thing I found is i'm unable to ping hotmail.com or msn.com or do a "telnet mail.hotmail.com 25". I am able to ping gmail.com and many other domains I tried. I tried changing my DNS servers to Google's Public DNS and did a ipconfig /flushdns but that had no effect. I am however able to connect with telnet to mx1.hotmail.com This is what the email headers look like when I send to a Google email server and I receive the email with no troubles. You can see that SPF is passing. Delivered-To: [email protected] Received: by 10.146.168.12 with SMTP id q12cs91243yae; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Received: by 10.43.48.7 with SMTP id uu7mr4292541icb.68.1298858509242; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Return-Path: Received: from canadaka.net ([66.199.162.177]) by mx.google.com with ESMTP id uh9si8493137icb.127.2011.02.27.18.01.45; Sun, 27 Feb 2011 18:01:48 -0800 (PST) Received-SPF: pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) client-ip=66.199.162.177; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) [email protected] Message-Id: <[email protected] Received: from coruscant ([127.0.0.1]:12907) by canadaka.net with [XMail 1.27 ESMTP Server] id for from ; Sun, 27 Feb 2011 18:01:29 -0800 Date: Sun, 27 Feb 2011 18:01:29 -0800 Subject: Test To: [email protected] From: XXXX Reply-To: [email protected] X-Mailer: PHP/5.2.13 I can send to gmail and other email services fine. I don't know what i'm doing wrong! UPDATE 1 I have been removed from hotmails IP block and am now able to send emails to hotmail, but they are all going directly to the JUNK folder. UPDATE 2 I used Telnet to send a test message to port25.com, seems my SPF is not being detected. Result: neutral (SPF-Result: None) canadaka.net. SPF (no records) canadaka.net. TXT (no records) I do have a TXT record, its been there for years, I did change it a week ago. Other sites that allow you to check your SPF detect it, but some others like Microsofts Wizard doesn't. This iw what my SPF record in my xname.org DNS file looks like: canadaka.net. 86400 IN TXT "v=spf1 a include:_spf.google.com ~all" I did have a nameserver as my 4th option that doens't have the TXT records since it doens't support it. So I removed it from the list and instead added wtfdns.com as my 4th adn 5th nameservers, which does support TXT.

    Read the article

  • Newly registered domain name still doesn't show up after 72 hours.

    - by BioGeek
    Seven days ago I ordered a domain name with a local (Belgian) domain name agent. I have already webspace at a shared host in the US, so I filled in their nameservers on the form. I immediately payed with my credit card. Three days ago I received an e-mail from the domain name agent, saying that my domain name was registered with the external nameservers I provided, and that the site would be visible within 24 hours. However, 72 hours after that mail I still can't see my domain name. A whois search shows indeed that my domain is registered on my name,but a ping to the domain returns unknown host and a traceroute gives the similar Name or service not known. What can have gone wrong, and which (Linux) commands can I use to find out. Or should I just be patient and will the domain name eventually be propagated?

    Read the article

  • Securing a Windows Server 2008 R2 Public Web Server

    - by Denny Ferrassoli
    I'm setting up a public web server: Windows Server 2008 R2, IIS7.5. Does anyone have a tutorial / walkthrough / tips on properly securing a public web server? I've seen a few tutorials but mostly focused on Windows Server 2003. What I've done so far: Created a specific user account for the website / app pool, Renamed Admin account, Installed FTPS, Configured firewall to block any non-public service (web / https), Configured firewall to allow access to management interfaces only from specific IP addresses (rdp, IIS management, ftp) Maybe a few other things but can't remember at the moment... ICMP is allowed... Should I disable all except ping? Port scan reveals only web and https ports. Any other suggestions? Thanks

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >