Search Results

Search found 2113 results on 85 pages for 'digital asset'.

Page 77/85 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Do RAID controllers commonly have SATA drive brand compatibility issues?

  - by Jeff Atwood

  We've struggled with the RAID controller in our database server, a Lenovo ThinkServer RD120. It is a rebranded Adaptec that Lenovo / IBM dubs the ServeRAID 8k. We have patched this ServeRAID 8k up to the very latest and greatest: RAID bios version RAID backplane bios version Windows Server 2008 driver This RAID controller has had multiple critical BIOS updates even in the short 4 month time we've owned it, and the change history is just.. well, scary. We've tried both write-back and write-through strategies on the logical RAID drives. We still get intermittent I/O errors under heavy disk activity. They are not common, but serious when they happen, as they cause SQL Server 2008 I/O timeouts and sometimes failure of SQL connection pools. We were at the end of our rope troubleshooting this problem. Short of hardcore stuff like replacing the entire server, or replacing the RAID hardware, we were getting desperate. When I first got the server, I had a problem where drive bay #6 wasn't recognized. Switching out hard drives to a different brand, strangely, fixed this -- and updating the RAID BIOS (for the first of many times) fixed it permanently, so I was able to use the original "incompatible" drive in bay 6. On a hunch, I began to assume that the Western Digital SATA hard drives I chose were somehow incompatible with the ServeRAID 8k controller. Buying 6 new hard drives was one of the cheaper options on the table, so I went for 6 Hitachi (aka IBM, aka Lenovo) hard drives under the theory that an IBM/Lenovo RAID controller is more likely to work with the drives it's typically sold with. Looks like that hunch paid off -- we've been through three of our heaviest load days (mon,tue,wed) without a single I/O error of any kind. Prior to this we regularly had at least one I/O "event" in this time frame. It sure looks like switching brands of hard drive has fixed our intermittent RAID I/O problems! While I understand that IBM/Lenovo probably tests their RAID controller exclusively with their own brand of hard drives, I'm disturbed that a RAID controller would have such subtle I/O problems with particular brands of hard drives. So my question is, is this sort of SATA drive incompatibility common with RAID controllers? Are there some brands of drives that work better than others, or are "validated" against particular RAID controller? I had sort of assumed that all commodity SATA hard drives were alike and would work reasonably well in any given RAID controller (of sufficient quality).

  Read the article

• PCI-DSS compliance for business with only swipe terminals [migrated]

  - by rowatt

  I support the IT infrastructure for a small retail business which is now required to undergo a PCI-DSS assessment. The payment service and terminal provider (Streamline) has asked that we use Trustwave to do the PCI-DSS certification. The problem I face is that if I answer all questions and follow Trustwave's requirements to the letter, we will have to invest significantly in networking equipment to segment LANs and /or do internal vulnerability scanning, while at the same time Streamline assures me that the terminals we have (Verifone VX670-B and MagIC3 X-8) are secure, don't store any credit card information and are PCI-DSS compliant so by implication we don't need to take any action to ensure their network security. I'm looking for any suggestions as to how we can most easily meet the networking requirements for PCI-DSS. Some background on our current network setup: single wired LAN, also with WiFi turned on (though if this creates any PCI-DSS complexities we can turn it off). single Netgear ADSL router. This is the only firewall we have in place, and the firewall is out the box configuration (i.e. no DMZ, SNMP etc). Passwords have been changed though :-) a few windows PCs and 2 windows based tills, none of which ever see any credit card information at all. two swipe terminals. Until a few months ago (before we were told we had to be PCI-DSS certified) these terminals did auth/capture over the phone. Streamline suggested we moved to their IP Broadband service, which instead uses an SSL encrypted channel over the internet to do auth/capture, so we now use that service. We don't do any ecommerce or receive payments over the internet. All transactions are either cardholder present, or MOTO with details given over phone and typed direct into terminal. We're based in the UK. As I currently understand it we have three options in order to get PCI-DSS certification. segment our network so the POS terminals are isolated from all PCs, and set up internal vulnerability scanning on that network. don't segment the network, and have to do more internal scanning and have more onerous management of PCs than I think we need (for example, though the tills are Windows based, they are fully managed so I have no control over software update policies, anti virus etc). All PCs have anti virus (MSE) and windows updates automatically applied, but we don't have any centralised go back to auth/capture over phone lines. I can't imagine we are the first merchant to be in this situation. I'm looking for any recommendations a simple, cost effective way to be PCI-DSS compliant - either by doing 1 or 2 above with (hopefully) simple and inexpensive equipment/software, or any other ways if there's a better way to do this. Or... should we just go back to the digital stone age and do auth/capture over the phone, which means we don't need to do anything on our network to be PCI-DSS certified?

  Read the article

• Email arrived in SPAM no matter I do SPF, DKIM, and others stuffs

  - by Xjet

  During a full day I tried to removed my email from SPAM (in google). So I start from scratch by instaling Postfix on debian, setup SPF and DKIM. Email stay in spam but header are here. So I continue to set up DMARC. So far so good. Here is my last header : Delivered-To: h********[email protected] Received: by 10.224.84.20 with SMTP id h20csp148174qal; Tue, 3 Jun 2014 01:16:22 -0700 (PDT) X-Received: by 10.112.148.165 with SMTP id tt5mr6432900lbb.61.1401783381908; Tue, 03 Jun 2014 01:16:21 -0700 (PDT) Return-Path: <[email protected]> Received: from bcp.monconcours.com ([188.226.227.141]) by mx.google.com with ESMTP id ue3si38630125lbb.3.2014.06.03.01.16.21 for <h********[email protected]>; Tue, 03 Jun 2014 01:16:21 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 188.226.227.141 as permitted sender) client-ip=188.226.227.141; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 188.226.227.141 as permitted sender) [email protected]; dkim=pass [email protected]; dmarc=pass (p=NONE dis=NONE) header.from=bcp.monconcours.com Received: by bcp.monconcours.com (Postfix, from userid 33) id 9EA90614F2; Tue, 3 Jun 2014 08:16:20 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=monconcours.com; s=mail; t=1401783380; bh=IHAmfgk+Ge5iunMmbPMRKPHJrHsCmMebmJkS/G3zk7w=; h=To:Subject:From:To:Reply-To:Date; b=w/cIlRwSFhNS0TIKJj6yd2R3PeKDkkSf/ht2x4FV4l1jOlgsEwsXN8m4aJQMO0uCA hG4AOUgIGAlCoP5qrgLGtRYgjVbKXmHY0cjMxUvbVDKI0xymzSxzuPqoIXWD3COe+v +W57zmEFcq93pJvDUivJzgIWbYFy6SRWe495ups0= To: h*****[email protected] Subject: Creads.fr vous remercie de votre visite, Buissness Angel pour 3 million X-PHP-Originating-Script: 0:testmail.php From: "Banque BCP - Concours photo #teamportugal" <[email protected]> To: hu*****[email protected] Reply-To: "Banque BCP - Concours photo #teamportugal" <[email protected]> MIME-Version: 1.0 Content-Type: multipart/alternative;boundary=np538d84549a709 Content-Transfer-Encoding: 8bit Organization: Creads Digital X-Priority: 3 X-Mailer: PHP5.4.4-14+deb7u9 Message-Id: <[email protected]> Date: Tue, 3 Jun 2014 08:16:20 +0000 (UTC) This is a MIME encoded message. --np538d84549a709 Content-type: text/plain;charset=utf- I've also noticed a warn log for opendmarc : warning: connect to Milter service inet:127.0.0.1:8893: Connection refused But it seems that DMARC pass anyway... I've setup the correct DNS for DKIM and SPF, domain name or ip is not blacklisted. I've test on http://www.mail-tester.com/web-rMZjFj&reloaded=12 Most things seems ok but I can't fix the Reverse DNS issue (I don't have access to the main server). I begin to be pretty annoyed by the problem that's why I need expert advice/help.

  Read the article

• SSL certificate for Oracle Application Server 11g

  - by Easter Sunshine

  I was asked to get an SSL certificate for an "Oracle Application Server 11g" which has a soon-to-expire certificate. Brushing aside the fact that 10g seems to be the newest version, I got a certificate from InCommon, as I usually do without problem (except this is the first time I supplied Oracle Application Server 11g as the software type on the CSR form). On the email containing links to download the certificate, it mentioned: Certificate Details: SSL Type : InCommon SSL Server : OTHER I forwarded the email over to the person responsible for installing it and got a reply that the server type must be Oracle Application Server for the certificate to work (the CN is the same as before). They were unable to install this certificate (no details provided to me) and mentioned they had this issue previously with Thawte when they didn't supply Oracle Application Server as the server type. I don't see any significant difference between the currently installed certificate (working) and the new one I just got signed by InCommon (not working). $ openssl x509 -in sso-current.cer -text shows, with irrelevant information ommitted. Data: Version: 3 (0x2) Signature Algorithm: sha1WithRSAEncryption Issuer: C=ZA, ST=Western Cape, L=Cape Town, O=Thawte Consulting cc, OU=Certification Services Division, CN=Thawte Premium Server CA/[email protected] Validity Not Before: Oct 1 00:00:00 2009 GMT Not After : Nov 28 23:59:59 2012 GMT Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:FALSE X509v3 CRL Distribution Points: Full Name: URI:http://crl.thawte.com/ThawteServerPremiumCA.crl X509v3 Extended Key Usage: TLS Web Server Authentication, TLS Web Client Authentication Authority Information Access: OCSP - URI:http://ocsp.thawte.com Signature Algorithm: sha1WithRSAEncryption and $ openssl x509 -in sso-new.cer -text shows Data: Version: 3 (0x2) Signature Algorithm: sha1WithRSAEncryption Issuer: C=US, O=Internet2, OU=InCommon, CN=InCommon Server CA Validity Not Before: Nov 8 00:00:00 2012 GMT Not After : Nov 8 23:59:59 2014 GMT Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Authority Key Identifier: keyid:48:4F:5A:FA:2F:4A:9A:5E:E0:50:F3:6B:7B:55:A5:DE:F5:BE:34:5D X509v3 Subject Key Identifier: 18:8D:F6:F5:87:4D:C4:08:7B:2B:3F:02:A1:C7:AC:6D:A7:90:93:02 X509v3 Key Usage: critical Digital Signature, Key Encipherment X509v3 Basic Constraints: critical CA:FALSE X509v3 Extended Key Usage: TLS Web Server Authentication, TLS Web Client Authentication X509v3 Certificate Policies: Policy: 1.3.6.1.4.1.5923.1.4.3.1.1 CPS: https://www.incommon.org/cert/repository/cps_ssl.pdf X509v3 CRL Distribution Points: Full Name: URI:http://crl.incommon.org/InCommonServerCA.crl Authority Information Access: CA Issuers - URI:http://cert.incommon.org/InCommonServerCA.crt OCSP - URI:http://ocsp.incommon.org Nothing jumps out at me as the reason one would not work so I don't have a specific request for the signer for what to do differently when re-signing.

  Read the article

• ASA and cisco vs NSA sonic firewall

  - by Lbaker101

  Currently I’m trying to structure our network to fully support and be redundant with BGP/Multi homing. Our current company size is 40 employees but the major part of that is our Development department. We are a software company and continued connection to the internet is a requirement as 90% of work stops when the net goes down. The only thing hosted on site (that needs to remain up) is our exchange server. Right now i'm faced with 2 different directions and was wondering if I could get your opinions on this. We will have 2 ISPs that are both 20meg up/down and dedicated fiber (so 40megs combined). This is handed off as an Ethernet cable into our server room. ISP#1 first digital ISP#2 CenturyLink we currently have 2x ASA5505s but the 2nd one is not in use. It was there to be a failover and it just needs the security+ license to be matched with the primary device. But this depends on the network structure. I have been looking into the hardware that would be required to be fully redundant and I found that we will either of the following. 2x Cisco 2921+ series routers with failover licenses. They will go in front of the ASAs and either connects in a failover state or 1 ISP into each of the 2921 series routers and then 1 line into each of the ASAs (thus all 4 hardware components will be used actively). So 2x Cisco 2921+ series routers 2x Cisco ASA5505 firewalls The other route 2x SonicWalls NSA2400MX series. 1 primary and the secondary will be in a failover state. This will remove the ASAs from the network and be about 2k cheaper than the cisco route. This also brings down the points of failure because it’s just the 2x sonicwalls It will also allow us to scale all the way up to 200-400 users (depending on their configuration). This also makes so the Sonic walls. So the real question is with the added functionality ect of the sonicwall is there a point in paying so much more to stay the cisco route? Thanks!

  Read the article

• Loss of wireless network connectivity when playing video via HDMI cable

  - by Jeff Fohl

  Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas? EDIT: I am now leaning towards the possibility that the HDMI cable is somehow interfering with the wireless network, when large amounts of data are being pushed through the cable. Is this possible?

  Read the article

• Asus M4A79XTD-EVO / AMD Phenom II X4 965 Crashes / BSOD / Hangs / Restarts

  - by Tiby

  I'll try to be as concise as possible because I have a lot to say about my problem, but I'd rather say it when asked or when I feel it's necessary, just to make this initial reading clearer. For about a year and a half I have periods when my system has all the problems in the title (I'll use the word 'crash' for either one). I'll list some patterns and what I tried to do and what were the results, but the list is not exclusive: usually it crashes when a CPU-intensive operation is in progress, like a game or video encoding or HD movie rendering, but also sometimes crashes when I'm doing nothing after a first crash the system is very unstable and sometimes it crashes even during POST, or doesn't boot at all Some months ago I went to a local service (one that you just put your computer on the table and sit there with a guy and trying to figure out the problem, very rare these days) and they used OCCT and it crashed every time he changed some part to test it out (PSU, RAM, video card, HDD). The last one was the CPU. They changed the CPU and it didn't crash any more. Then when they put my CPU back, it also didn't crash. We figured that the trouble was the thermal paste (probably some 2 years old) because it was the only thing changed while testing. Up until 2 weeks ago, I haven't had any more problems. 2 weeks ago the problems reappeared. I changed again the thermal paste, put some Arctic Silver 5, and for about a week everything worked perfect (tried some games, video encoding, no more crashes). But again it started crashing in the same fashion as the first time. But now, instead, I figured out a very odd behaviour: when I start some of the apps above, in most cases it crashes if I start OCCT and turn on the CPU test, and run any of the programs above, it doesn't crash, even if the CPU is on 100% load (and 65-70 degrees Celsius temperature) if I shut down OCCT and continue using the programs, it crashes in a very short period of time (even if the CPU is on 5-10% load and 40 degrees) There are so many patterns and temporary solutions that I figured out in this year and a half period of time, that I can't include them all because I don't know which one are more relevant, but I'll happily provide any details you ask. My system is: CPU: AMD Phenom II X4 965 (3400 MHz - 125W) MB: ASUS M4A79XTD - EVO RAM: Corsair Vengeance 8 GB (2 x 4GB) CL8 1600MHz Video: HIS Radeon HD5770 1GB PSU: Corsair 750W HDD: Western Digital 1TB OS: Win 7 Enterprise 64 BIT (also tried with Windows Server 2008 R2 Trial and Win XP)

  Read the article

• Windows Server 2008 Software Raid 5 - Data integrity issues

  - by Fopedush

  I've got a server running Windows Server 2008 R2, with a (windows native) software raid-5 array. The array consists of 7x 1TB Western Digital RE3 and RE4 drives. I have offline backups of this array. The problem is this: I noticed a few days ago after copying a large file to the disk that there was an integrity issue with that file - it was a ~12GB file that I had downloaded via uTorrent. After moving it to the raid array, I used uTorrent to relocate the download location, and performed a re-check so I could seed it from that location. The recheck found that only 6308/6310 chunks of the copied file were intact. My next step was to write a quick powershell script that would copy files to the array, while performing a SHA1 hash of the original and resultant files and comparing them. Smaller files (100-1000MB) copied over just fine. When I started copying larger data (~15GB), I found that the hash check failed about 2/3rds of the time. The corrupt files had very, very small inconsistencies - less than .01%. I further eliminated the possibility of networking or client issues by placing this large file on the C:\ of the server, and copying it repeatedly from there to the array, seeing similar results. Copying the data via explorer, powershell, or the standard windows command prompt yield the same results. None of the copies fail or report any problems. The raid array itself is listed as healthy in disk management. After a few experiments, I shut down the server and ran memtest overnight. No errors were detected. A basic run of chkdsk found no problems, but I did not use the /R flag, as I was unsure how that might affect a software raid-5 volume. I next ran Crystal Disk Info to check the smart data on the drives - but found that CDI only detected 5 out of 7 of the disks in the array. I have no idea why. Nevertheless, CDI shows the following "caution" flags on a single one of the drives: 05 199 199 140 000000000001 Reallocated Sectors Count C5 200 200 __0 000000000001 Current Pending Sector Count Which is a little bit alarming, but I don't really know what to do with the information. I hardly feel like one reallocated sector could be causing this. At this point, I'm looking for some guidance on what to do next. I need to determine the cause of this issue, but I'm hesitant to run chkdsk /R or any bootable disk health checkers because I'm afraid they might break the array. I've considered triggering a re-sync of the array, but I'm not actually sure how to do that without doing something silly like manually dropping a disk and then restoring it. Any advice that could help me ferret out the precise cause of this issue would be greatly appreciated.

  Read the article

• Thinkpad speaker turns mute - Linux Codec issue?

  - by Curlew

  At some point a few days ago the speakers on my Lenovo Thinkpad T410 (Model number: 2537A11) suddenly stopped working randomly. This error happens every time I watch a video or listen to a music file. The sound just abruptly stops. At the moment, I can't produce a single sound no matter what I do. I am using Debian GNU/Linux on this laptop and there doesn't appear to be anything else wrong (the fan is working, no abnormal heat (staying around ~40°C), no other obvious errors or problems). Here is the output of a nice program someone pointed me to: martin@martin:~/Downloads$ sudo python run.py --monitor Using temporary directory: /dev/shm/hda-analyzer You may remove this directory when finished or if you like to download the most recent copy of hda-analyzer tool. Downloading file hda_analyzer.py Downloading file hda_guilib.py Downloading file hda_codec.py Downloading file hda_proc.py Downloading file hda_graph.py Downloading file hda_mixer.py Downloaded all files, executing hda_analyzer.py Watching 1 cards ====================================== Sound is working normally and then it stops and the following lines appear: Diff for codec 0/0 (0x14f15069): --- +++ @@ -164,17 +164,17 @@ Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00000010: OUT Pin Default 0x901701f0: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT - Power: setting=D0, actual=D0 + Power: setting=D3, actual=D3 Connection: 2 0x10* 0x11 Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE And now there is also an error in the dmesg output hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. I changed the bdl_pos_adj to various numbers (-1, 0, 64, 1024) and either there is no change at all or dmesg reports that the adjustment is too big. I wonder if this bdl_pos_adj is the real reason for the error. Here is my hardware information provided by alsa-info.sh website. Okay, i did some serious testing and even installed Windows and now i officially conclude that this is a hard-ware related issue with my Laptop speakers. Reason: The error occurs in my installed Debian Linux, an Ubuntu Live distribution and Windows XP No error-message appears in all of the OS. The sound just keeps running and i can't hear a thing. I tested different setups, including OSS, ALSA and the pulseaudio server on top If i use my new usb-headphones i can hear sound all the time without any sudden silences. So obviously, although hard to believe, my laptop speakers are not okay (never heard of similar cases). I'll award the bounty to anyone who can point me to good tutorials or the procedure how to exchange my T410 speakers (i still have warranty. The laptop was bought in Germany, but now i am in Denmark). Or to someone who can explain me the output from hda-analyzer (big log above).

  Read the article

• Graphics card artifacting

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 @ stock clocks 3x 2GB DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) My graphics card started artifacting while I was playing a game. It artifacted, the display blinked, then I got an NVIDIA driver has crashed and recovered message. Kept going, more artifacts, another crash, but this time my display blanked out and I couldn't do anything. Restarted my computer - artifacting is in the BIOS - got to Windows 7 but it BSOD'd before I could even log in. I restarted the computer again - artifacts cleared themselves out and I managed to get to Win7, but it soon started blinking in and out and artifacting again. Checked the card temps and they're well within range. (50 idle, 70 full load) The ambient temperature here is about 80-85F with high humidity. Tried Safe Mode and it still froze up/BSOD'd. Already tried the following to fix this problem: - Reseat the graphics card and swapped in a different slot. - Removed cover on card and sprayed with compressed air to clean it out. - Swapped around memory and/or went with only using one stick at a time. - Underclocked card I called EVGA Tech Support and they said that the voltage on the 12V rail of my Corsair AX750 PSU was on the high end of the "acceptable" range (12.4V, highest within acceptable range is 12.6V - optimal is obviously 12V). They gave me an RMA number anyway, but I want to get a second opinion from you all before I send this thing off, as shipping from where I live to EVGA is kind of pricey. This PSU is only 6 months old. So that I don't have to play RMA tag, which case would be most likely? I'm strapped for cash at the moment so I want to reduce the amount of RMAs I have to do since shipping is expensive here. Is there any surefire way to test to see if it's really the graphics card or the PSU? I tried unplugging any devices that were connected to the 12V rail (except for my SSD and graphics card) as I do have 3 mechanical hard drives, but the voltage for that rail didn't drop (it remained at 12.4V). I'm fairly sure it isn't the drivers since I'm getting the artifacting at the BIOS too. Right now I'm back in Windows 7 but I don't know for how long until it messes up again. Any ideas?

  Read the article

• Alienware m15x (older model) BSOD investigation

  - by Crishu

  A frined of mine asked me to help him with an Alienware m15x laptop that had a little service history. It was bought in june 2008, serviced in january 2009 for a random fps drop problem, Alienware returned it saying nothing was wrong. The laptop still had hiccups, but after juggling a few drivers and settings, the fps drops weren't as noticeable. Eventually it died in Sept. 2009. It would not boot up locking itself on a white/gray screen. (i think it was overheating .. clocking in 100 degrees Celsius). So back to Alienware it went. They replaced the GPU and all was fine. Up until these blue screens started showing up. One other thing that was updated was the HDD and a Windows 7 reinstall, in August. From then on it seems to have started its BSOD. Could this be the culprit? Why? 0_o The original Windows was Vista but it was upgraded with a digital download/purchase of Windows 7 Home Premium and activated after installing windows. No errors on the old HDD, just on the latest installation. LE:Due note that now the old HDD is used to see if issues re-occur. So please, I am in need of someone who can interpret these windows dump files: Minidump I may have come to some conflicting conclusions. So if someone can clarify each dump/date and the probable cause/error it had; and a final conclusion or solution, we would be very grateful. Also please consult report for other system info I omitted: same link,code: XRWIVLWG If I missed something or if you have any other questions I'll be happy to answer them. Thank you. Good day. Processor: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz Network Adapter Properties: Broadcom NetLink (TM) Gigabit Ethernet Intel(R) Wireless WiFi Link 4965AGN Video Adapter Properties: Driver Description NVIDIA GeForce 8800M GTX Driver Date 19.08.2009 Driver Version 8.16.11.8681 Driver Provider NVIDIA INF File oem19.inf Hardware ID PCI\VEN_10DE&DEV_060C&SUBSYS_0770152D&REV_A2 Location Information @system32\DRIVERS\pci.sys,#65536;PCI bus %1, device %2, function %3;(1,0,0) PCI Device NVIDIA GeForce 8800M GTX [NoDB] BIOS String Version 62.92.34.0.8 Installed Drivers nvd3dum (8.16.11.8681), nvwgf2um, nvwgf2um Hard Dik Drive: Model ID ST9120823ASG (**older one 120gb**) Model ID WD32000BEKT (new 320gb with fresh OS)

  Read the article

• New harddrives failing within weeks.

  - by Jason Kealey

  I've experienced 8 hard disk failures in 3 months and have tried many things to solve the issue permanently but I have failed. I would like to know if you have any advice for me. System was running Win XP on an Asus P5W-DH Deluxe. I have setup a RAID-1 array. I started out with 2 x 500 GB 7200RPM Western Digital drives. One died. I took it out to RMA it. On the same day, the router was fried. Assumed a power surge occurred; connected an older UPS to protect the system. Once I got my hands on an identical disk, I installed it. The RAID array was rebuilt. A few days later, the other one died. Assumed the rebuild caused it to fail. Took it out for RMA. Before the other one arrived, the remaining one died. I then discovered I could re-enable them using the Intel Matrix Storage Manager. I re-enabled both and the system seemed fine for a week, until both died again. I got two new 1.5 TB 7200RPM Seagate drives and re-installed Windows 7. Also replaced the UPS and power supply. They both died again. The voltage on the plug is stable between 120 and 122V as per the UPS. None of the other devices have had any problems (monitors, etc.). At this point, I see two options: a) electrical issue in the house that was, for some reason, not blocked by the UPS. b) something else inside the system causing surges? motherboard? onboard raid controller? Failures happen fairly quickly, between 2 and 14 days after I fix the previous issue. I just gotten a new computer (Core i7) to replace it. If it is stable, I can determine that b) was the problem. If it fries its hard drive again, I can determine that it is an electrical issue in the house. Do you have any other thoughts? Any tools I can run on the drives that failed to get more information about the original SMART event history?

  Read the article

• What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

  - by Tyler

  Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

  Read the article

• Windows Server 2008 R2 bare metal restore to different hardware

  - by S Falken

  Scenario: I have a Windows Server 2008 R2 x64 installation whose main disk drive is now 7 years old and showing signs of age. For the last couple of months it's been displaying increased errors and requirements to run checkdisk. I have successfully created a bare metal restore (BMR) image on a separate data drive on the server, which can be seen from the Windows Recovery console; I tested it by booting to and using the Windows Server installation DVD's recovery utilities. The BMR image includes the system drive with boot partition, system state, and the D:\ drive of the server, which is where I have followed the practice of installing any program that does not require a C:\ installation path. Therefore, the BMR includes both the C:\ and D:\ drives, system state and boot partition. The C:\ drive is a 7-year old Seagate 160GB. The D:\ drive is a rather newer 120GB Western Digital. I have purchased a 128GB solid state Samsung 830 that I want to restore these partitions to, using the BMR. Questions: In the above-referenced article, Microsoft seems to be indicating that I am only able to restore to like-kind hardware, which doesn't help at all and is difficult to believe. Is this really true? I've cleaned these drives up and minimized the size of partition they require. C:\ will need about a 70GB partition, and the data on D:\ will need about 50GB. Will Windows Server backup allow me to restore the BMR to newly-created partitions on the SSD, discarding extra space? I don't need a "how-to": I just need an "is it possible". Justification: Before posting this question, I checked ServerFault articles with the following titles, but none of them were about this exact scenario: Restore SBS 2008 Backup to Same Hardware but Different Disk Configuration Restoring Windows Server 2008 to different hardware - OEM License Restoring II6 server after a hardware failure windows 2008 r2 fail to restore Domain controller failed to restore using windows backup tools How does restore to dissimilar hardware work? Migrating Windows 2008 R2 from a PC to a different PC TFS 2005 Server restore from one hardware to another I also researched Microsoft but only received an oblique answer which was not precisely aimed at my question, at the following URL: http://support.microsoft.com/kb/249694#method3

  Read the article

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• BlueScreens on my ThinkPad with Windows 7 64 Bit and a SSD (CRITICAL_OBJECT_TERMINATION, ntoskernel.exe)

  - by pvorb

  I'm getting BlueScreens about every five days for more than three months. Here's an example: A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntoskrnl.exe CRITICAL_OBJECT_TERMINATION If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000f4 (0x0000000000000003, 0xfffffa80065f2b30, 0xfffffa80065f2e10, 0xfffff80002f9bf40) *** ntoskrnl.exe - Address 0xfffff80002c98d00 base at 0xfffff80002c19000 DateStamp 0x4d9fdd5b It's has always been the same BlueScreen message showing CRITICAL_OBJECT_TERMINATION, 0x000000f4, and ntoskrnl.exe. Of course the addresses change. My computer is a ThinkPad T400 (about 2 years old) with a SSD in it. I'm also running Windows 7 Professional 64 bit. When I bought my computer, it had a 250GByte SeaGate HDD in it, which I replaced by a 500GByte HDD by Western Digital. Last september I bought a Corsair F120 SSD and replaced the HDD by this SSD. Then I bought a LEICKE HDD adapter for the UltraBay II where I plugged in my 500GByte HDD. This configuration ran about half a year without any errors. After re-installing Windows this spring, I am getting regular BlueScreens. Sometimes my system runs for about 2 weeks without a BSOD, sometimes I get several BlueScreens a day. The only thing that I noticed is, that I'm always running Google Chrome when it happens. Is there anyone who has made his/her own bad experiences whith some of my components or is there anybody who can tell me if it would be helpful to send my notebook to Lenovo? Thank you very much for your help on my issue! Regards, Paul

  Read the article

• Computer randomly reboots during "intensive activity".

  - by Reznor

  My friend has been playing games on his new build for some time now. However, lately, his computer will randomly reboot out of nowhere, so far only happening in game, and presumably only to happen in game as it happens nowhere else. This can happen in game during play or even in the options. Note, it isn't a crash or blue screen. It's just a normal reboot. This started today, I believe, and has only occured in two games: Dead Space and Stalker: Shadow of Chernobyl. He has played a handful of games before these, for about a week or so, without this problem. We theorized on two possibilities: Maybe something is overheating? Maybe the power supply is inadequate? These two were quickly dismissed, as all his components were operating at normal temperatures when he got back to his desktop from the reboot, and we all know these parts don't exactly cool down quickly, especially if they get hot enough to trigger a reboot. Besides, I know at-least my motherboard reports processor overheating at start-up, and requests I press f1 to continue into boot. The PSU one was dismissed too. He has an 850w power supply on a rig that was estimated to take only 720 some watts, that's with some overcompensating to be safe. He opened up his case to make sure nothing was seated wrong or in the way. All was fine, but he did notice a sticker on his video card. It had a giant barcode on it and some numbers. Now, I'm used to seeing these stickers, they're the warranty stickers, right, and removal voids the warranty? Yeah, well, we find it odd because this sticker is slapped right over the circuits of the video card, not on a block or anything. Is this normal? Should he remove it? Right now, I am concerned with the memory. Could that be at fault? Here are his specs: Windows 7 Home Premium, 64-Bit Intel i7 950 EVGA GeForce 570 GTX 4 GB DDR3 PC10666 dual-channel Corsair RAM Corsair 850w PSU Gigabyte GA-X58A-UD3R Western Digital 1 TB WD1001FALS

  Read the article

• Windows 7 immediately disconnects a USB drive

  - by Daniel Saner

  I am having a problem with Windows 7 x64 consistently disconnecting one specific USB mass storage drive immediately after it is connected. The drive in question is a Cowon C2 digital music player which works in standard mass storage controller mode (i.e. no device-specific drivers needed/available). When I connect the player, Windows plays the "USB connect" sound and the device appears (under its correct name) in the device manager, but it never appears as a drive. The player itself displays "USB Connected" for a split-second before reporting that it has been disconnected again. Since the player, by design, reboots after it has been disconnected, Windows plays the "USB disconnect" sound before restarting the whole cycle once the player has powered back on. I am connecting the player through an Intel X79 Chipset motherboard (Gigabyte GA-X79-UD3) to Windows 7 Pro 64-bit. The player used to work fine the first few times I connected it, showing up as an external drive; it only recently stopped working. It is not a problem with the player, since it works fine when connected to another computer, even such running the exact same operating system. It is also not a problem with the USB controller, since the issue is the same on both the Intel USB 2.0 and the Fresco Logic FL1009 USB 3.0 controller ports. I have also not had the problem with any other drive so far. Among the things I have tried so far: Disabling USB legacy mode in BIOS Disabling energy-saving power down for all USB controllers in Windows' device manager Removing and reinstalling Windows' USB mass storage driver Removing and reinstalling Intel and Fresco Logic USB controller driver Restoring the player to factory defaults None of these made a difference. Again, the player used to work fine on the exact same system just days ago; I didn't install any new hardware or drivers on it since then. I would be very grateful for any hints on what else to try. Edit: Here is another new hint; I found out that when I connect the drive before booting Windows, it is available in Windows Explorer as it should, and does not automatically disconnect. If I remove and reconnect it though, the infinite connect/disconnect-loop starts anew.

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Complete Guide to Networking Windows 7 with XP and Vista

  - by Mysticgeek

  Since there are three versions of Windows out in the field these days, chances are you need to share data between them. Today we show how to get each version to be share files and printers with one another. In a perfect world, getting your computers with different Microsoft operating systems to network would be as easy as clicking a button. With the Windows 7 Homegroup feature, it’s almost that easy. However, getting all three of them to communicate with each other can be a bit of a challenge. Today we’ve put together a guide that will help you share files and printers in whatever scenario of the three versions you might encounter on your home network. Sharing Between Windows 7 and XP The most common scenario you’re probably going to run into is sharing between Windows 7 and XP.  Essentially you’ll want to make sure both machines are part of the same workgroup, set up the correct sharing settings, and making sure network discovery is enabled on Windows 7. The biggest problem you may run into is finding the correct printer drivers for both versions of Windows. Share Files and Printers Between Windows 7 & XP  Map a Network Drive Another method of sharing data between XP and Windows 7 is mapping a network drive. If you don’t need to share a printer and only want to share a drive, then you can just map an XP drive to Windows 7. Although it might sound complicated, the process is not bad. The trickiest part is making sure you add the appropriate local user. This will allow you to share the contents of an XP drive to your Windows 7 computer. Map a Network Drive from XP to Windows 7 Sharing between Vista and Windows 7 Another scenario you might run into is having to share files and printers between a Vista and Windows 7 machine. The process is a bit easier than sharing between XP and Windows 7, but takes a bit of work. The Homegroup feature isn’t compatible with Vista, so we need to go through a few different steps. Depending on what your printer is, sharing it should be easier as Vista and Windows 7 do a much better job of automatically locating the drivers. How to Share Files and Printers Between Windows 7 and Vista Sharing between Vista and XP When Windows Vista came out, hardware requirements were intensive, drivers weren’t ready, and sharing between them was complicated due to the new Vista structure. The sharing process is pretty straight-forward if you’re not using password protection…as you just need to drop what you want to share into the Vista Public folder. On the other hand, sharing with password protection becomes a bit more difficult. Basically you need to add a user and set up sharing on the XP machine. But once again, we have a complete tutorial for that situation. Share Files and Folders Between Vista and XP Machines Sharing Between Windows 7 with Homegroup If you have one or more Windows 7 machine, sharing files and devices becomes extremely easy with the Homegroup feature. It’s as simple as creating a Homegroup on on machine then joining the other to it. It allows you to stream media, control what data is shared, and can also be password protected. If you don’t want to make your Windows 7 machines part of the same Homegroup, you can still share files through the Public Folder, and setup a printer to be shared as well.   Use the Homegroup Feature in Windows 7 to Share Printers and Files Create a Homegroup & Join a New Computer To It Change which Files are Shared in a Homegroup Windows Home Server If you want an ultimate setup that creates a centralized location to share files between all systems on your home network, regardless of the operating system, then set up a Windows Home Server. It allows you to centralize your important documents and digital media files on one box and provides easy access to data and the ability to stream media to other machines on your network. Not only that, but it provides easy backup of all your machines to the server, in case disaster strikes. How to Install and Setup Windows Home Server How to Manage Shared Folders on Windows Home Server Conclusion The biggest annoyance is dealing with printers that have a different set of drivers for each OS. There is no real easy way to solve this problem. Our best advice is to try to connect it to one machine, and if the drivers won’t work, hook it up to the other computer and see if that works. Each printer manufacturer is different, and Windows doesn’t always automatically install the correct drivers for the device. We hope this guide helps you share your data between whichever Microsoft OS scenario you might run into! Here are some other articles that will help you accomplish your home networking needs: Share a Printer on a Home Network from Vista or XP to Windows 7 How to Share a Folder the XP Way in Windows Vista Similar Articles Productive Geek Tips Delete Wrong AutoComplete Entries in Windows Vista MailSvchost Viewer Shows Exactly What Each svchost.exe Instance is DoingFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaShow Hidden Files and Folders in Windows 7 or VistaAdd Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

  Read the article

• Geek Fun: Virtualized Old School Windows – Windows 95

  - by Matthew Guay

  Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7.  Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64.  For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started.  Here’s the first setup screen.  For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices.  They actually let you choose what extra parts of Windows to install if you wished.  Oh, and who wants to run Windows 95 on your “Portable Computer”?  Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95.  Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95!  Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable.  We didn’t even get our test copy fully booted after installation before we saw our first error screen.  Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1!  The UI was still outdated in some spots.   Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player.  Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs?  This help file about new programs designed for Windows 95 lists a lot of outdated names in tech.    And, you really may want some programs.  The first edition of Windows 95 didn’t even ship with Internet Explorer.   We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window.  Double click on C:, and it opens in a new window.  Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search!  If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer.  I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane.  Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it!  At least we can all be thankful for our modern computers and operating systems today, right?  Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Geek Fun: Virtualized Old School Windows – Windows 95

  - by Matthew Guay

  Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7.  Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64.  For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started.  Here’s the first setup screen.  For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices.  They actually let you choose what extra parts of Windows to install if you wished.  Oh, and who wants to run Windows 95 on your “Portable Computer”?  Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95.  Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95!  Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable.  We didn’t even get our test copy fully booted after installation before we saw our first error screen.  Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1!  The UI was still outdated in some spots.   Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player.  Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs?  This help file about new programs designed for Windows 95 lists a lot of outdated names in tech.    And, you really may want some programs.  The first edition of Windows 95 didn’t even ship with Internet Explorer.   We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window.  Double click on C:, and it opens in a new window.  Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search!  If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer.  I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane.  Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it!  At least we can all be thankful for our modern computers and operating systems today, right?  Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Ask How-To Geek: Dropbox in the Start Menu, Understanding Symlinks, and Ripping TV Series DVDs

  - by Jason Fitzpatrick

  This week we take a look at how to incorporate Dropbox into your Windows Start Menu, understanding and using symbolic links, and how to rip your TV series DVDs right to unique and high-quality episode files. Once a week we dip into our reader mailbag and help readers solve their problems, sharing the useful solutions with you in the process. Read on to see our fixes for this week’s reader dilemmas. Add Drobox to Your Start Menu Dear How-To Geek, I use Dropbox all the time and would like to add it right onto my start menu along side the other major shortcuts like Documents, Pictures, etc. It seems like adding Dropbox into the menu should be part of the Dropbox installation package! Sincerely, Dropboxing in Des Moines Dear Dropboxing, We agree, it would be a nice installation option. As it stands you’re going to have to do a little simple hacking to get Dropbox nestled neatly into your start menu. The hack isn’t super elegant but when you’re done you’ll have the link you want and it’ll look like it was there all along. Check out this step-by-step guide here in order to take an existing Library shortcut and rework it to be a Dropbox link. Understanding and Using Symbolic Links Dear How-To Geek, I was talking to a coworker the other day about an issue I’d been having with a media center application I’m running. He suggested using symbolic links to better organize my media and make it easier for the application to access my collection. I had no idea what he was talking about and never got a chance to bug him about it later. Can you clear up this whole symbolic links business for me? I’ve been using computers for years and I’ve never even heard of it! Sincerely, Symbolic Who? Dear Symbolic, Symbolic links aren’t commonly used by many Windows users which is why you likely haven’t run into the concept. Symbolic links are essentially supercharged shortcuts—the newly introduced Windows library system is really just a type of symbolic link system. You can use symbolic links to do all sorts of neat stuff like link folders to your Dropbox folder, organize media, and more. The concept of symbolic links is pretty simple but the execution can be really tricky. We’d suggest reading over our guide to creating symbolic links in Windows 7, Windows XP, and Ubunutu to get a clearer idea what you’re getting into. Rip Your TV DVDs into Handy Episode Files Dear How-To Geek, My wife got me an iPod for Christmas and I still haven’t got around to filling it up. I have tons of entire TV show seasons on DVD and would like to get them on the iPod but I have absolutely no idea where to start. How do I get the shows off the discs? I thought it would be as easy to import the TV shows into iTunes as it is to import tracks off a CD but I was totally wrong. I tried downloading some applications to rip them but those didn’t work at all. Very frustrating! Surely there is an easy and/or automated way to do this, right? Sincerely, Free My DVDs Dear DVDs, Oh man is this a frustration we can relate to. It’s inordinately difficult to get movies and TV shows off physical media and into digital (and portable media player-friendly) formats. There are a multitude of ways to rip DVDs and quite a few applications out there (some good, some mediocre, and some outright malware). We’d recommend a two-part punch to solve your ripping woes. You’ll need a copy of DVDFab to strip away the protections on the discs and rip the disc and Handbrake to load the disc image and convert the files. It’s not quite as smooth as the CD-to-iTunes workflow but it’s still pretty easy. Check out all the steps and settings you’ll want to toggle here. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines Google’s New Personal Blocklist Extension Kills Search Engine Spam KeyCounter Tracks Your Keystrokes and Mouse Clicks Add Custom LED Ambient Lighting to Your PC or Media Center The Trackor Monitors Amazon Prices; Integrates with Chrome, Firefox, and Safari Four Awesome TRON Legacy Themes for Chrome and Iron Anger is Illogical – Old School Style Instructional Video [Star Trek Mashup]

  Read the article

• SQLAuthority News – Author Visit Review – TechMela Nepal – March 29-30, 2010

  - by pinaldave

  I was very fortunate to attend TechMela at Kathmandu, Nepal on 29th and 30th of March 2010. I would like to thank Allen Bailochan Tuladhar from Microsoft MDP Nepal for inviting me. Allen is a person with seemingly infinite energy and unlimited passion for Microsoft Technology. If you get an opportunity to spend just one hour with him, you will surely be more enthusiastic with regards to Microsoft Technology. And, I was lucky enough that I was able to spend about a total of 9 days with him in Kathmandu, working along with him in the Tech Community. TechMela Nepal Pinal at TechMela, Nepal TechMela is considered as one of the biggest events in Nepal, having been organized by Microsoft MDP Nepal. This event was attended by around 500 students and hundreds of Tech professionals. The event was handled very professionally and at very large scale. Every minor detail was properly planned and obviously thought out well. There were around 50+ volunteers from MS MDP who were monitoring this event systematically to make sure the event would run as smooth as planned. Attendees in Geek T-Shirts During this event, I was delighted to meet David Lim of Microsoft Singapore. He is very passionate in working for Microsoft Technology, as well as building deep relations with the Community. I was fortunate to spend my entire afternoon with him during the sight-seeing trip. We discussed various MS technologies and their community’s adoption as well as the way how each of us can be a part of the community activity. He also delivered excellent keynotes at the event. I must say that this is one of the most enjoyable keynotes I have ever attended. It was interesting and interactive, and I must say that I had the 70s feelings with all the fonts and graphics. I still remember him saying, “Yeah, I was a student and I know you.” Allen Tuladhar, David Lim, Pinal Dave and Guests After the keynote, everybody cheered when Allen came on stage to talk about the event and to introduce the agenda for the next two days. I must say that Allen is one of the most well-known people in Nepal. I was impressed with his popularity, and to prove this, when he got on the stage he had to wait for a long full minute before he was able to greet “Welcome” while the attendees were clapping and cheering. Technology Panelist at Techmela Kathmandu, Nepal This event was blessed with the top-of-the-top officials of various IT industries, Nepal ministries and the US Embassy. All the prominent personalities were present for panel discussion on the stage. The talk was done on various subjects. Also, the energy level which was set by Allen really echoed in the audience as they asked certain questions on different global as well local IT-related questions. The panel discussion really was discussion instead of usual monologue of one person. Pinal Dave presending at TechMela Kathmandu, Nepal This was a two-day event and my session was on either of the day. I had a great participation from the audience on both days. The place where the event was organized had a capacity of around 500+ audience. Both of my sessions were heavily attended and volunteers did a fabulous job helping the attendees find empty seats or arrange some additional seats. I was overwhelmed with the interaction I have received in the large hall. Attendees were not so shy to express their thoughts, so both the sessions were followed up by top notch one-on-one conversations for a couple of hours. Pinal Dave presending at TechMela Kathmandu, Nepal Pinal Dave presending at TechMela Kathmandu, Nepal Pinal Dave presending at TechMela Kathmandu, Nepal There are many questions that I have received during the event, and many of them can be interesting for all of us here so I will write detailed blog posts on these subjects. I also tried to participate in the gaming activities held at the event, but I felt I was kind of lost even if I was only playing for the very first minutes. This made me realize that I am really getting old for video games. Allen presending at TechMela Kathmandu, Nepal Allen’s session on Digital Photography was very impressive as he demonstrated so many features of the Windows Live Product that at one point I felt he is MVP for Windows Live. In fact, he demonstrated how all the Microsoft products work together to give users an excellent desktop experience; no wonder he is an MVP for Windows Desktop Experience. Pinal Dave presending at TechMela Kathmandu, Nepal Any event has two common dilemmas – food and logistics. However, this event had excellent food and state-of-the-art organization. I was very glad that this two-day event turned out to be one of the most successful events in Nepal. I also noticed that almost all attendees rate their experience as beyond expectation and truly exceptional. Pinal Dave and Allen Bailochan Tuladhar If you ever get invited by Allen in any of his event, I strongly suggest that you drop all your plans and scheduled stuff, and accept his invitation. For sure, the event will be a very memorable one and would be your once-in-a-lifetime experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >