Search Results

Search found 2516 results on 101 pages for 'gigabit ethernet'.

Page 77/101 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Would a switch be covered by a router's firewall

  - by Uh-yeah...

  So... Hopefully; this is the right place for this question. I need more Ethernet ports on my home network. Sadly, we already have an old router connected to the main router and we still need more ports. I feel dumb for asking; but, I just would like to double check. Would the devices connected to the switch be "protected" by the Main router's firewall? ? Up to this point I have assumed that was the case; but, a co-worker is convinced that is not the case [ I believe he is thinking of a situation in which the switch (un-managed) is before an access point]. [It would go modem to main router; main router then has the switch and old router connected to it.

  Read the article

• Why is my rsync so slow?

  - by iblue

  My Laptop and my workstation are both connected to a Gigabit Switch. Both are running Linux. But when I copy files with rsync, it performs badly. I get about 22 MB/s. Shouldn't I theoretically get about 125 MB/s? What is the limiting factor here? EDIT: I conducted some experiments. Write performance on the laptop The laptop has a xfs filesystem with full disk encryption. It uses aes-cbc-essiv:sha256 cipher mode with 256 bits key length. Disk write performance is 58.8 MB/s. iblue@nerdpol:~$ LANG=C dd if=/dev/zero of=test.img bs=1M count=1024 1073741824 Bytes (1.1 GB) copied, 18.2735 s, 58.8 MB/s Read performance on the workstation The files I copied are on a software RAID-5 over 5 HDDs. On top of the raid is a lvm. The volume itself is encrypted with the same cipher. The workstation has a FX-8150 cpu that has a native AES-NI instruction set which speeds up encryption. Disk read performance is 256 MB/s (cache was cold). iblue@raven:/mnt/bytemachine/imgs$ dd if=backup-1333796266.tar.bz2 of=/dev/null bs=1M 10213172008 bytes (10 GB) copied, 39.8882 s, 256 MB/s Network performance I ran iperf between the two clients. Network performance is 939 Mbit/s iblue@raven $ iperf -c 94.135.XXX ------------------------------------------------------------ Client connecting to 94.135.XXX, TCP port 5001 TCP window size: 23.2 KByte (default) ------------------------------------------------------------ [ 3] local 94.135.XXX port 59385 connected with 94.135.YYY port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec

  Read the article

• wireless printer - entering WPA - is there a quicker way?

  - by camcam

  I have a wireless printer (Brother DCP-585CW). The wireless setup instruction says I should enter the WPA key to the printer. The key is entered using up and down buttons on the printer. So, I am supposed to enter 64 characters using up and down buttons. To enter 1 character, it takes on average (24+10)/2 = 17 times pressing the button (digits start after 24 letters). So 17*64 = 1088 times. Is there a quicker way to setup a wireless printer? Maybe there is a Windows program that discovers printers connected to computer through USB or Ethernet (my printer has both sockets) and allows to pre-configure it for wireless usage (enter the long WPA key)? Update There is BRAdmin program and it allows to set up almost all wireless settings... almost - all except WPA :(

  Read the article

• How to improve network performance between two Win 2008 KMV guest having virtio driver already?

  - by taazaa

  I have two physical servers with Ubuntu 10.04 server on them. They are connected with a 1Gbps card over a gigabit switch. Each of these host servers has one Win 2008 guest VM. Both VMs are well provisioned (4 cores, 12GB RAM), RAW disks. My asp.net/sql server applications are running much slower compared to very similar physical setups. Both machines are setup to use virtio for disk and network. I used iperf to check network performance and I get: Physical host 1 ----- Physical Host 2: 957 Mbits/sec Physical host 1 ----- Win 08 Guest 1: 557 Mbits/sec Win 08 Guest 1 ----- Phy host 1: 182 Mbits/sec Win 08 Guest 1 ----- Win 08 Guest 2: 111 Mbits /sec My app is running on Win08 Guest 1 and Guest 2 (web and db). There is a huge drop in network throughput (almost 90%) between the two guest. Further the throughput does not seem to be symmetric between host and guest as well. The CPU utilization on the guests and hosts is less than 2% right now (we are just testing right now). Apart from this, there have been random slow downs in the network to as low as 1 Mbits/sec making the whole application unusable. Any help to trouble shoot this would be appreciated.

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• Host data transfer limit calculations and network protocol headers

  - by UpTheCreek

  OK, this might be a really stupid question, but... I'm building a web app that utilises websockets. There's fairly rapid messaging going on, so I've been taking a look at the network traffic with wireshark, to see if there's any way of reducing the amount of data we are sending over the wire, and hence costs. A typical message has approx 150 byte data payload, and according to wireshark the lower layer stuff takes up about: Ethernet: 14 bytes IP: 20 Bytes TCP: 20 Bytes My question is, are these network headers included in data transfer calculations? What about TCP ACK messages? (another 54 bytes according to wireshark) This may seem petty, but because we have so much messaging going on, and because the payload is a similar size to these headers, it's significant.

  Read the article

• Is there other usage of Comcast extension cable and splitter?

  - by Tim

  I have an unused Comcast high-speed internet self-install kit from 2006. It has two coils of extension cable, and a splitter, and some screws. The name of the cable is "extension cable" printed on the package. I wonder if that is its actual name? As ethernet cables are always useful, I wonder if the extension cables are totally worthless and should be tossed into a trash can? Or are they usable for some other purposes, or even sellable? Thanks! SVI Digital SV-2G Splitter (5/1000MHz): One interface of the cables: Screws

  Read the article

• Windows Server 2008 R2 grinds to a screeching halt during file copy operations

  - by skolima

  When my Windows Server 2008 R2 machine is performing any large disk operations (copying 10GB files from one drive to another, copying similar file over network, merging HyperV snapshots, compressing large files), performance of the whole machine slows down terribly, everything becomes unresponsive. This is noticeable in any situation when the disk access is large enough not to fit in the cache. Are there any settings available for tuning this behaviour? I can accept slower file transfer if this would give me more responsiveness. System details: Dell Optiflex 960, Core 2 Quad Q9650, 8GB RAM, 2 SATA drives - 320GB (ST3320418AS) and 1TB (ST31000528AS), NCQ active on both, Intel 82564LM-3 Gigabit Ethernet, ATI HD 3450 graphics, Intel ICH10 bridge. We have multiple machines like this, every one is exhibiting the same behaviour. I though this was overkill for a workstation, apparently I was mistaken. Update: I guess I shouldn't have mentioned the HyperV at all. The above configuration is a standard workstation setup at the company I work for, this is not a server of any kind. I have at most 3 virtual machines working, and usually I'm the only person accessing them. Never the less, the slowdown occurs even when no VMs are running. On a Linux machine I'd simply ionice the copy process and I could forget about it, is there any way to manage IO priorities on Windows?

  Read the article

• Device that connects to a switch via RJ45, that emulates a PC

  - by Mike Christiansen

  One of my co-workers once saw a device that plugged into a RJ45 jack, that emulated a PC. It could be configured with an IP address, and respond to pings. I was wondering if anyone knew about these, or even what they are called? This will be used to simulate a PC in a classroom environment. Thanks in advance. Edit: This is a CCNA classroom, we are looking to simulate a PC connected to an ethernet port on a router. These will be on different subnets, etc. This might be doable with a VM through VLANs and virtual switches, but then we are getting away from configuring the physical ports on the router the way we want to.

  Read the article

• Chrome Residual Redirect to Login Page

  - by Shadow503

  My college redirects people in the dorms to a login page when using an ethernet (or wifi) connection. I am now at home, and certain domains keep redirecting to this login page. I've tried running ipconfig /flushdns and I flushed the chrome's local dns cache as described here: How to clear/flush the DNS cache in Google Chrome?. Interestingly enough, while http://www.reddit.com redirects to the login page, http://www.reddit.com/r/funny works. Firefox works fine for both urls. Is there a way to fix this without deleting all of my cookies? Thanks!

  Read the article

• Which LAN driver should I use for Asus F5Z ?

  - by Radek

  A friend of mine asked me to re-install his Asus F5Z notebook with Windows XP. I installed successfully all drivers from Asus driver download site. Everything is working fine but the Ethernet driver. The installation of Lan Driver for Windows XP finishes with strange message "Please shutdown & plug Realtech PCI-e card to complete the installation. Not sure if it matters but OnChip SATA is in 'Native IDE' mode . The original one with Vista was 'IDE - AHCI mode'. Any idea how I can make the LAN adapter to work under Windows XP?

  Read the article

• Impossible do find motherboard drivers to and old Dell computer

  - by Masziej

  Hello, I recently formatet and reinstalled XP on my girlfriends computer. Ive had this computer since 2001, never formatet it, until now =) Anyway the problem is that i cant find any drivers for the motherboard (integrated audio, video and ethernet). as i said its an old ass Dell. Cant remember if I got any cds along with it. Even if i did theyre gone a long time ago. So, I ran CPUZ and got this: --Motherboard-- Dell Computer Corp. 0K8980 And started googling. But didnt find any drivers. Still cant So im asking for a little help here. I really need to get the computer going before she wants a new one :D And yes i have looked on dells homesite, but they dont seem to wanna host drivers for their old stuff

  Read the article

• CentOS box access by name

  - by out_sider

  I intent to develop a centos server with lamp. What I want is connect the server to any kind of home network and access it by http://myserver. I have already successfully set a static ip but I can't seem to ping it by name. If you had to develop a solution with the intent to plug in the box by Ethernet to a router and access it with a browser using the server name what would you do? That's basically what I'd like to know. Thanks in advance

  Read the article

• TCP Sessions and IP Changes

  - by Kyle Brandt

  What happens to a TCP session when the IP of a client changes? I did a simple test of having netcat listen on a port, and connecting to that port from a client machine. I then changed the IP of the client while that nc session was open and sent some data, no data was received by server after changing the IP. I know they are different layers, but does TCP use IPs for part of how it distinguishes sessions? Does my example not work because of how the application handles it, or is this not working because of something happening at TCP/IP/Ethernet layers? Does this depend on the OS implementation? ( I am most interested in Linux at the moment)

  Read the article

• Cannot Ping PS3 Using a Wired Connection

  - by Post

  PS3 is using the inbuilt wireless network adapter (I cannot change this) When I try to ping the PS3 from ANY computer which is on a wired ethernet connection, I get Request Timed Out errors. Whenever I ping from a computer with a wireless connection, it works just fine. To be clear: Pinging from Wireless PC to Wireless PS3 works Pinging from Wired PC to Wireless PS3 fails I have tried this on several PC's and Laptops all with the same results. As an attempted solution I have set up static IP's on all related devices. More information: Default Gateway = 192.168.2.1 PS3(wireless) = 192.168.2.100 PC(wired) = 192.168.2.99 Subnet Mask(for both devices, I have made sure) = 255.255.255.0 Thanks

  Read the article

• Configure clients to navigate through specific wan. Pfsense

  - by leandronn

  I have a machine with a pfsense running. It is configured with three ethernet cards. LAN 192.168.2.1/21 WAN1 200.41.X.2/24 WAN2 200.41.X.3/24 ISP Gateway 200.41.X.1 This is a connection with 5 different IP addresses. WAN1 and WAN2 are directly connected to my ISP router. I need a way to configure some clients navigating through WAN1 and some through WAN2. I am new to pfsense so, please, if you can send me some examples to do this. I can add two squids if it is necessary. Thanks a lot.

  Read the article

• Can I use my old Sony Handycam TRV815 as a web cam?

  - by Optimal Solutions

  Has anyone ever used their old Sony Handycam (or maybe any older hand-held camcorder) as a web cam? As in streaming the live video from the cam to a web server (local or remote/Internet). My TRV815 has a pretty darn good picture quality for its time.. Via USB or Ethernet. It has S-Video but I think that is input. It has RCA out (white/red for audio and yellow for video) and I have used that to display to my TV. I have web cams already but was wondering if I could put this one to use also just for kicks..

  Read the article

• can I connect two modems and comunicate on two side

  - by GongT

  I just wondering how modems work. I know the process of "modulation" and "demodulation". So I wanto know is "demodulation" are simple revese of "modulation" in real world. The PC can got an IP address when connect as type 1 What will happen when I connect them like type 2? type 1 : [PC] ================= [router] type 2 : [PC] === [m] ------- [m] === [router] [m] : modem(exactly same) === : Ethernet cable --- : DSL cable (phone line, maybe optical fiber, or something else?) ISP has a large number of model, Is them same thing as the one in my home(but with diffrent size/speed/price...etc)? Or it's completely different thing?

  Read the article

• Is ceph usable with only 100Mbps bandwidth between nodes?

  - by vaab

  I haven't great hardware, but my requirements are low, I would like to start using ceph so as to abstract filesystem location and allow potential easy scaling to bigger hardware in an hypothetical future. My actual hardware meets ceph hardware requirements except the ethernet bandwidth part between the hosts. Mine is 100 Mbit/s which is much lower than the 1Gbps expected in ceph, even from the minimal requirement. Will I be able to use ceph in a very small smili-prod environnement (with limited number of clients) ? FYI: My hardware is 2 or maybe 3 hosts having each 4 core Intel, 24Go RAM, 2x2To disks but 100Mpbs between them.

  Read the article

• Secondary fallback/failover network on Cisco ASA

  - by tyranitar

  In my network there is a Cisco ASA 55x0 with "inside" interface (network 192.168.79.0/24) and "outside" interface (network 89.x.x.48/29) There is this nat rule: object network NAToutside nat (inside,outside) dynamic interface and the static route route outside 0.0.0.0 0.0.0.0 89.x.x.49 1 and all ACL rules. Now I have another new outside network by another ISP called "outside2", this network is already natted and the Cisco ASA in in the network 192.168.70.0/24. I would use this network as a fallback one. So I set the nat rule: object network NAToutside2 nat (inside,outside2) dynamic interface and the static route with a different metric route outside2 0.0.0.0 0.0.0.0 192.168.70.1 2 Clearly it doesn't work: when I disconnect the outside ethernet cable no workstation can connect to the Internet throught the outside2 network... What do I need more?

  Read the article

• Windows 7 - all usb devices go to sleep im idle mode

  - by dvdx

  A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

  Read the article

• Access Domain over Wireless

  - by William

  I have an active directory server and all hard wired clients connect perfectly fine. However any wireless clients do not recognize that they are connected to the domain, despite the dns server being appropriately set to the domain controller for both wired and wireless connections. Also - both wired and wireless clients are on the same subnet. I am using a Verizon food actiontec router. What am I missing? For instance, this is the same computer connected first via an Ethernet cable and second via the wireless.

  Read the article

• How can I use my Windows 7 computer to share WiFi connection with PCs that don't have wireless?

  - by Tom Auger

  Long story short: modem and wireless router are downstairs and we're having a LAN party where some visitors don't have wireless. There's no way to run the length of cabling required, so looking for options. My Windows 7 Home Premium PC has a wireless-n connection, and I'd like to see if I can use it as a "hub" or switch of sorts, running an ethernet cable out of the back and into a switch, then splitting off to the other PCs. Is this an option? I know with Internet sharing, you can set up your PC as a wireless access point, but I want to do the opposite.

  Read the article

• Two routers in a LAN

  - by taxi

  router A no wifi +--- pc01 +--- pc02 | +--- router B wifi +--- pc03 +--- printer In my LAN I have a modem-router (say A) (no wifi connection) acting as DHCP server, and connected to the Internet. Now, I want to add another router (say B) (with wifi connection) to the LAN, in order to connect wifi pc's and net printers. Here I would disable DCHP server functionality. Is it correct to connect router B to router A via an ethernet port? In router A I define an IP address (eg 192.168.1.100) to be assigned to router B (MAC address). I expect to see router B listed as an attached device, in router A's status, but on the contrary it is not listed.

  Read the article

• Using a BTHomeHub as a wireless booster

  - by Ploo

  I currently have a BT HomeHub downstairs but the wireless signal isnt strong enough on the second floor. I have an old BT HomeHub from the previous contract that I wanted to set up upstairs. I currently have an ethernet cable leading up into the old router. I then took my laptop and plugged it into the old router in hopes of configuring it but when I cannot reach api.home which is the address of the router. I cannot connect to the router wirelessly either since the password was changed and I'd have to change it through config. At this point I am completely stumped, any ideas?

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >