Search Results

Search found 4091 results on 164 pages for 'intel core2'.

Page 77/164 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • Why does Ubuntu only detect one USB LAN adapters at a time?

    - by EGO
    I try to connect real switch with my computer for an exam preparation, for this purpose I need more than one LAN cards, and there is only one built in LAN card in my computer. So, to get more LAN cards, I bought 4 USB Ethernet adapters (as I have 4 usb ports in may laptop 2 usb 2.0 ports, 2 usb 3.0 ports). When I plug these adapters in my computer Ubuntu only detects one LAN card from 2.0 usb ports, and one LAN card from 3.0 ports. And sometimes detects only one USB LAN from all the usb ports. Actually the real problem is Ubuntu shows these USB LAN adapters in the "lsusb", but does not list them in "ifconfig". Kontron (Industrial Computer Source / ICS Advent) is my LAN USB ethernet. abc@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 001 Device 003: ID 138a:0018 Validity Sensors, Inc. Bus 001 Device 004: ID 064e:e258 Suyin Corp. Bus 003 Device 011: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 013: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 003 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 005: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR -- etho is my built in LAN card, while eth1 is the only USB LAN card that ubuntu has detected. abc@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 2c:27:d7:a5:d2:39 inet6 addr: fe80::2e27:d7ff:fea5:d239/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:21056 errors:0 dropped:1 overruns:0 frame:0 TX packets:5669 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1407289 (1.4 MB) TX bytes:372566 (372.5 KB) Interrupt:49 Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:e0:4c:53:44:58 inet6 addr: fe80::2e0:4cff:fe53:4458/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9230 errors:0 dropped:0 overruns:0 frame:0 TX packets:9230 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:557648 (557.6 KB) TX bytes:557648 (557.6 KB) wlan0 Link encap:Ethernet HWaddr cc:52:af:5e:78:05 inet addr:192.168.1.65 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::ce52:afff:fe5e:7805/64 Scope:LinkU UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17389 errors:0 dropped:0 overruns:0 frame:0 TX packets:12231 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22452248 (22.4 MB) TX bytes:1502750 (1.5 MB) If I unplug the USB LAN card which Ubuntu has detected, then Ubuntu will detect a USB LAN card from the remaining plugged adapters, and process go on untill I plug all the USB LAN adapters. Looking for some urgent help. Thanks

    Read the article

  • Need help with chronic slow wifi connections

    - by mgeorge
    I have had chronic slow wifi connections on several networks for a while now, I think since my update to 12.04 when it came out. I have tried many of the tips and tricks already available out there in the forums with no luck (wicd, etc..). I want to see if any of you experts out there might be able to help me, and thanks in advance!! I use ubuntu 12.04 on a lenovo ideapad y650, and most networks I connect to lose the connection frequently or do not give appropriate bandwidth when I am connected. Here are some results of the usual go-to system checks: cat /etc/lsb-release; uname -a: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Linux mgeorge-lenovo 3.2.0-48-generic-pae #74-Ubuntu SMP Thu Jun 6 20:05:01 UTC 2013 i686 i686 i386 GNU/Linux lspci -nnk | grep -iA2 net: 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlwifi -- 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) Subsystem: Lenovo Device [17aa:3878] Kernel driver in use: tg3 lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 090c:7371 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) iwconfig: lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Dyno" Mode:Managed Frequency:2.412 GHz Access Point: CC:5D:4E:46:0A:93 Bit Rate=150 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-40 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:948 Invalid misc:728 Missed beacon:0 eth0 no wireless extensions. rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod: Module Size Used by uvcvideo 67203 0 videodev 86588 1 uvcvideo nouveau 712674 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197641 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau mxm_wmi 12893 1 nouveau wmi 18744 1 mxm_wmi joydev 17393 0 arc4 12473 2 snd_hda_codec_realtek 174313 1 snd_hda_codec_hdmi 31775 1 snd_hda_intel 32719 3 snd_hda_codec 109562 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80916 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi psmouse 86520 0 snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event serio_raw 13027 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq iwlwifi 366509 0 mac80211 436493 1 iwlwifi snd 62218 16 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,sn d_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 17890 0 sparse_keymap 13658 1 ideapad_laptop cfg80211 178877 2 iwlwifi,mac80211 ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm ir_mce_kbd_decoder 12681 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 ir_rc5_decoder 12459 0 rc_rc6_mce 12454 0 ir_nec_decoder 12459 0 video 19115 1 nouveau ene_ir 18019 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir bnep 17830 2 rfcomm 38139 0 parport_pc 32114 0 bluetooth 158479 10 bnep,rfcomm ppdev 12849 0 binfmt_misc 17292 1 mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141414 0 nm-tool: NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: tg3 State: unavailable Default: no HW Address: 00:23:5A:CC:85:BD Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 [Dyno] -------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: yes HW Address: 00:22:FA:D0:94:CA Capabilities: Speed: 150 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) *Dyno: Infra, CC:5D:4E:46:0A:93, Freq 2412 MHz, Rate 54 Mb/s, Strength 81 WPA2 IPv4 Settings: Address: 10.0.0.43 Prefix: 24 (255.255.255.0) Gateway: 10.0.0.1 DNS: 10.0.0.1

    Read the article

  • Randomely loosing wireless connexion with Cubuntu 12.04

    - by statquant
    I am presently experiencing random disconnections from my wireless network. It looks like it is more and more frequent (however I have not seen any clear pattern). This is killing me... Here is some information that should help (from ubuntu forums). Thanks for reading Machine : Acer Aspire S3 statquant@euclide:~$ lsb_release -d Description: Ubuntu 12.04.1 LTS statquant@euclide:~$ uname -mr 3.2.0-33-generic x86_64 statquant@euclide:~$ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... statquant@euclide:~$ lspci 02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) statquant@euclide:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 004: ID 064e:c321 Suyin Corp. Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. statquant@euclide:~$ ifconfig wlan0 Link encap:Ethernet HWaddr 74:de:2b:dd:c4:78 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::76de:2bff:fedd:c478/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:913 errors:0 dropped:0 overruns:0 frame:0 TX packets:802 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:873218 (873.2 KB) TX bytes:125826 (125.8 KB) statquant@euclide:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"Bbox-D646D1" Mode:Managed Frequency:2.437 GHz Access Point: 00:19:70:80:01:6C Bit Rate=65 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=56/70 Signal level=-54 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:71 Missed beacon:0 statquant@euclide:~$ dmesg | grep "wlan" [ 17.495866] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.498950] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.072015] wlan0: authenticate with 00:19:70:80:01:6c (try 1) [ 20.269853] wlan0: authenticate with 00:19:70:80:01:6c (try 2) [ 20.272386] wlan0: authenticated [ 20.298682] wlan0: associate with 00:19:70:80:01:6c (try 1) [ 20.302321] wlan0: RX AssocResp from 00:19:70:80:01:6c (capab=0x431 status=0 aid=1) [ 20.302325] wlan0: associated [ 20.307307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.402292] wlan0: no IPv6 routers present statquant@euclide:~$ sudo lshw -C network [sudo] password for statquant: *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 74:de:2b:dd:c4:78 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-33-generic firmware=N/A ip=192.168.1.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c0400000-c047ffff memory:afb00000-afb0ffff statquant@euclide:~$ iwlist scan wlan0 Scan completed : Cell 01 - Address: 00:19:70:80:01:6C Channel:6 Frequency:2.437 GHz (Channel 6) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"Bbox-D646D1" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000125fb152bb Extra: Last beacon: 40020ms ago IE: Unknown: 000B42626F782D443634364431 IE: Unknown: 010882848B960C121824 IE: Unknown: 030106 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101820003A4000027A4000042435E0062322F00 IE: Unknown: 2D1A4C101BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D1606080800000000000000000000000000000000000000 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000 And... finally, please note that I did the following (after looking for fixes of similar problems), but unfortunately it did not work sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1

    Read the article

  • Getting Audio from a Zone

    - by bleonard
    Now that I have Firefox and Java Web Start running from a zone, the last piece of the puzzle was audio (essential because most Flash content is accompanied by sound).  In the global zone there's a nice little utility called audiotest for testing your sound: bleonard@solaris:~$ audiotest Sound subsystem and version: SunOS Audio 4.0 (0x00040003) Platform: SunOS 5.11 snv_151a i86pc *** Scanning sound adapter #1 *** /dev/sound/audio810:0dsp (audio engine 0): audio810#0 - Performing audio playback test... <left> ................OK <right> ...............OK <stereo> ..............OK <measured sample rate 47727.00 Hz (-0.57%)> *** All tests completed OK *** Of course, before you can try audiotest in a zone, it must be installed: root@myzone:~# pkg install audio-utilities Packages to install: 1 Create boot environment: No DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 6/6 0.4/0.4 PHASE ACTIONS Install Phase 20/20 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 However, we'll need to do more than just install audiotest: root@myzone:~# audiotest /dev/mixer: No such file or directory The device file is missing from /dev. The audio devices also need to be added to the zone. For this we modify the zone configuration as follows: bleonard@solaris:~$ sudo zonecfg -z myzone Password: zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/audio* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/sound/* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/mixer* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/sndstat zonecfg:myzone:device> end zonecfg:myzone> verify zonecfg:myzone> exit Then reboot the zone: bleonard@solaris:~$ sudo zoneadm -z myzone reboot After which, audiotest should work: root@myzone:~# audiotest Sound subsystem and version: SunOS Audio 4.0 (0x00040003) Platform: SunOS 5.11 snv_151a i86pc *** Scanning sound adapter #1 *** /dev/sound/audio810:0dsp (audio engine 0): audio810#0 - Performing audio playback test... <left> ................OK <right> ...............OK <stereo> ..............OK <measured sample rate 48208.00 Hz (0.43%)> *** All tests completed OK *** You can also examine /dev/sndstat for additional information: root@myzone:~# cat /dev/sndstat SunOS Audio Framework Audio Devices: 0: audio810#0 Intel AC'97, ICH (DUPLEX) Mixers: 0: audio810#0 Intel AC'97, ICH AC'97 codec: SigmaTel STAC9700 However, when testing the sound from Firefox (from a user account other than root), such as this recent Flash presentation on Solaris availability, you may still be disappointed. This is simply a permissions problem, as the devices only have read and write permissions for root: root@myzone:~# ls -l /dev/audio* crw------- 1 root root 99, 3 Jul 1 10:21 /dev/audio crw------- 1 root root 99, 4 Jul 1 10:21 /dev/audioctl To address this: root@myzone:~# chmod 777 /dev/audio* root@myzone:~# chmod 777 /dev/sound/* And you should be all set.

    Read the article

  • 12.10 unable to install or even run from Live CD with nVidia GTX 580

    - by user99056
    I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

    Read the article

  • empty response body in ajax (or 206 Partial Content)

    - by Nikita Rybak
    Hi guys, I'm feeling completely stupid because I've spent two hours solving task which should be very simple and which I solved many times before. But now I'm not even sure in which direction to dig. I fail to fetch static content using ajax from local servers (Apache and Mongrel). I get responses 200 and 206 (depending on the server), empty response text (although Content-Length header is always correct), firebug shows request in red. Javascript is very generic, I'm getting same results even here: http://www.w3schools.com/ajax/tryit.asp?filename=tryajax_first (just change document location to 'http://localhost:3000/whatever') So, it's probably not the cause. Well, now I'm out of ideas. I can also post http headers, if it'll help. Thanks! Response Headers Connection close Date Sat, 01 May 2010 21:05:23 GMT Last-Modified Sun, 18 Apr 2010 19:33:26 GMT Content-Type text/html Content-Length 7466 Request Headers Host localhost:3000 User-Agent Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://www.w3schools.com/ajax/tryit_view.asp Origin http://www.w3schools.com Response Headers Date Sat, 01 May 2010 21:54:59 GMT Server Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 mod_jk/1.2.28 Etag "3d5cbdb-fb4-4819c460d4a40" Accept-Ranges bytes Content-Length 4020 Cache-Control max-age=7200, public, proxy-revalidate Expires Sat, 01 May 2010 23:54:59 GMT Content-Range bytes 0-4019/4020 Keep-Alive timeout=5, max=100 Connection Keep-Alive Content-Type application/javascript Request Headers Host localhost User-Agent Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Origin null

    Read the article

  • PyDev and Django: PyDev breaking Django shell?

    - by Rosarch
    I've set up a new project, and populated it with simple models. (Essentially I'm following the tut.) When I run python manage.py shell on the command line, it works fine: >python manage.py shell Python 2.6.4 (r264:75708, Oct 26 2009, 08:23:19) [MSC v.1500 32 bit (Intel)] on win32 Type "help", "copyright", "credits" or "license" for more information. (InteractiveConsole) >>> from mysite.myapp.models import School >>> School.objects.all() [] Works great. Then, I try to do the same thing in Eclipse (using a Django project that is composed of the same files.) Right click on mysite project Django Shell with Django environment This is the output from the PyDev Console: >>> import sys; print('%s %s' % (sys.executable or sys.platform, sys.version)) C:\Python26\python.exe 2.6.4 (r264:75708, Oct 26 2009, 08:23:19) [MSC v.1500 32 bit (Intel)] >>> >>> from django.core import management;import mysite.settings as settings;management.setup_environ(settings) 'path\\to\\mysite' >>> from mysite.myapp.models import School >>> School.objects.all() Traceback (most recent call last): File "<console>", line 1, in <module> File "C:\Python26\lib\site-packages\django\db\models\query.py", line 68, in __repr__ data = list(self[:REPR_OUTPUT_SIZE + 1]) File "C:\Python26\lib\site-packages\django\db\models\query.py", line 83, in __len__ self._result_cache.extend(list(self._iter)) File "C:\Python26\lib\site-packages\django\db\models\query.py", line 238, in iterator for row in self.query.results_iter(): File "C:\Python26\lib\site-packages\django\db\models\sql\query.py", line 287, in results_iter for rows in self.execute_sql(MULTI): File "C:\Python26\lib\site-packages\django\db\models\sql\query.py", line 2368, in execute_sql cursor = self.connection.cursor() File "C:\Python26\lib\site-packages\django\db\backends\__init__.py", line 81, in cursor cursor = self._cursor() File "C:\Python26\lib\site-packages\django\db\backends\sqlite3\base.py", line 170, in _cursor self.connection = Database.connect(**kwargs) OperationalError: unable to open database file What am I doing wrong here?

    Read the article

  • Explicit Type Conversion and Multiple Simple Type Specifiers

    - by James McNellis
    To value initialize an object of type T, one would do something along the lines of one of the following: T x = T(); T x((T())); My question concerns types specified by a combination of simple type specifiers, e.g., unsigned int: unsigned int x = unsigned int(); unsigned int x((unsigned int())); Visual C++ 2008 and Intel C++ Compiler 11.1 accept both of these without warnings; Comeau 4.3.10.1b2 and g++ 3.4.5 (which is, admittedly, not particularly recent) do not. According to the C++ standard (C++03 5.2.3/2, expr.type.conv): The expression T(), where T is a simple-type-specifier (7.1.5.2) for a non-array complete object type or the (possibly cv-qualified) void type, creates an rvalue of the specified type, which is value-initialized 7.1.5.2 says, "the simple type specifiers are," and follows with a list that includes unsigned and int. Therefore, given that in 5.2.3/2, "simple-type-specifier" is singular, and unsigned and int are two type specifiers, are the examples above that use unsigned int invalid? (and, if so, the followup is, is it incorrect for Microsoft and Intel to support said expressions?) This question is more out of curiosity than anything else; for all of the types specified by a combination of multiple simple type specifiers, value initialization is equivalent to zero initialization. (This question was prompted by comments in response to this answer to a question about initialization).

    Read the article

  • How to setup matlabpool for multiple processors?

    - by JohnIdol
    I just setup a Extra Large Heavy Computation EC2 instance to throw it at my Genetic Algorithms problem, hoping to speed up things. This instance has 8 Intel Xeon processors (around 2.4Ghz each) and 7 Gigs of RAM. On my machine I have an Intel Core Duo, and matlab is able to work with my two cores just fine by runinng: matlabpool open 2 On the EC2 instance though, matlab only is capable of detecting 1 out of 8 processors, and if I try running: matlabpool open 8 I get an error saying that the ClusterSize is 1 since there's only 1 core on my CPU. True, there is only 1 core on each CPU, but I have 8 CPUs on the given EC2 instance! So the difference from my machine and the ec2 instance is that I have my 2 cores on a single processor locally, while the EC2 instance has 8 distinct processors. My question is, how do I get matlab to work with those 8 processors? I found this paper, but it seems related to setting up matlab with multiple EC2 instances (not related to multiple processors on the same instance, EC2 or not), which is not my problem. Any help appreciated!

    Read the article

  • How do I test OpenCL on GPU when logged in remotely on Mac?

    - by Christopher Bruns
    My OpenCL program can find the GPU device when I am logged in at the console, but not when I am logged in remotely with ssh. Further, if I run the program as root in the ssh session, the program can find the GPU. The computer is a Snow Leopard Mac with a GeForce 9400 GPU. If I run the program (see below) from the console or as root, the output is as follows (notice the "GeForce 9400" line): 2 devices found Device #0 name = GeForce 9400 Device #1 name = Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz but if it is just me, over ssh, there is no GeForce 9400 entry: 1 devices found Device #0 name = Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz I would like to test my code on the GPU without having to be root. Is that possible? Simplified GPU finding program below: #include <stdio.h> #include <OpenCL/opencl.h> int main(int argc, char** argv) { char dname[500]; size_t namesize; cl_device_id devices[10]; cl_uint num_devices; int d; clGetDeviceIDs(0, CL_DEVICE_TYPE_ALL, 10, devices, &num_devices); printf("%d devices found\n", num_devices); for (d = 0; d < num_devices; ++d) { clGetDeviceInfo(devices[d], CL_DEVICE_NAME, 500, dname, &namesize); printf("Device #%d name = %s\n", d, dname); } return 0; } EDIT: I found essentially the same question being asked on nvidia's forums. Unfortunately, the only answer was of the form "this is the wrong forum".

    Read the article

  • SQLite self-join performance

    - by Derk
    What I essentially want, is to retreive all features and values of products which have a particular feature and value. For example: I want to know all available hard drive sizes of products that have an Intel processor. I have three tables: product_to_value (product_id, feature_id, value_id) features (id, value) // for example Processor family, Storage size, etc. values (id, value) // for example Intel, 60GB, etc The simplified query I have now: SELECT features.name, featurevalues.name, featurevalues.value FROM products, products as prod2, features, features as feat2, values, values as val2 WHERE products.feature = features.id AND products.value = values.id AND products.product = prod2.product AND prod2.feature_id = feat2.id AND prod2.value_id = val2.id AND features.id = ? AND feat2.id = ? All columns have an index. I am using SQLite. The problem is that it's very slow (70ms per query, without the self-join it's <1ms). Is there a smarter way to fetch data like this? Or is this too much to ask from SQLite? I personally think I am simply overlooking something, as I am quite new to SQLite.

    Read the article

  • Problems using a library in Xcode

    - by Pablo
    Hi! I'm actually developping an application for iPhone and I need to use a library, initially dedicated to a Linux environment. Since I'm using a Mac (with Snow Leopard and Intel Core Duo), I guess it's possible to use this library in my app. My library has 3 files: a file .h, a file .a and a file .so (both .a and .so are in /Developer/usr/lib). In addition I have included the .h i nmy code and I've added the .a in XCode has a framework (and it works because XCode find the .so compiling). For your info when I use the command "file" for the file .so, I have: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, not stripped When I compile for the Xcode Simulator, I have a warning and an error. The warning is: In /Developer/usr/lib/mylib.so, file was built for unsupported file format which is not the architecture being linked (i386) The error is: "_mylib_fct", referenced from: -[MyAppAppDelegate applicationDidBecomeActive:] in MyAppAppDelegate.o Symbol(s) not found Collect2: ld returned 1 exit status When I compile for the Device 3.0 with architecture arm6, I also have the same error, but the warning is quite different: ln /Users/Pablo/MyApp/mylib.a file is not of required architecture I try to solve this and make the app working with this lib since days, and I don't understand why the compiler is complaining... is it a 32/64 bits issues ? How can I deal with that ? Your help will be very appreciated. Thx!

    Read the article

  • Building a python module and linking it against a MacOSX framework

    - by madflo
    I'm trying to build a Python extension on MacOSX 10.6 and to link it against several frameworks (i386 only). I made a setup.py file, using distutils and the Extension object. I order to link against my frameworks, my LDFLAGS env var should look like : LDFLAGS = -lc -arch i386 -framework fwk1 -framework fwk2 As I did not find any 'framework' keyword in the Extension module documentation, I used the extra_link_args keyword instead. Extension('test', define_macros = [('MAJOR_VERSION', '1'), ,('MINOR_VERSION', '0')], include_dirs = ['/usr/local/include', 'include/', 'include/vitale'], extra_link_args = ['-arch i386', '-framework fwk1', '-framework fwk2'], sources = "testmodule.cpp", language = 'c++' ) Everything is compiling and linking fine. If I remove the -framework line from the extra_link_args, my linker fails, as expected. Here is the last two lines produced by a python setup.py build : /usr/bin/g++-4.2 -arch x86_64 -arch i386 -isysroot / -L/opt/local/lib -arch x86_64 -arch i386 -bundle -undefined dynamic_lookup build/temp.macosx-10.6-intel-2.6/testmodule.o -o build/lib.macosx-10.6-intel-2.6/test.so -arch i386 -framework sgdosx -framework srtosx -framework ssvosx -framework stsosx Unfortunately, the .so that I just produced is unable to find several symbols provided by this framework. I tried to check the linked framework with otool. None of them is appearing. $ otool -L test.so test.so: /usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.0.1) There is the output of otool run on a test binary, made with g++ and ldd using the LDFLAGS described at the top of my post. On this example, the -framework did work. $ otool -L vitaosx vitaosx: /Library/Frameworks/sgdosx.framework/Versions/A/sgdosx (compatibility version 1.0.0, current version 1.0.0) /Library/Frameworks/ssvosx.framework/Versions/A/ssvosx (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.0.1) May this issue be linked to the "-undefined dynamic_lookup" flag on the linking step ? I'm a little bit confused by the few lines of documentation that I'm finding on Google. Cheers,

    Read the article

  • Is it possible that a single-threaded program is executed simultaneously on more than one CPU core?

    - by Wolfgang Plaschg
    When I run a single-threaded program that i have written on my quad core Intel i can see in the Windows Task Manager that actually all four cores of my CPU are more or less active. One core is more active than the other three, but there is also activity on those. There's no other program (besided the OS kernel of course) running that would be plausible for that activitiy. And when I close my program all activity an all cores drops down to nearly zero. All is left is a little "noise" on the cores, so I'm pretty sure all the visible activity comes directly or indirectly (like invoking system routines) from my program. Is it possible that the OS or the cores themselves try to balance some code or execution on all four cores, even it's not a multithreaded program? Do you have any links that documents this technique? Some infos to the program: It's a console app written in Qt, the Task Manager states that only one thread is running. Maybe Qt uses threads, but I don't use signals or slots, nor any GUI. Link to Task Manager screenshot: http://img97.imageshack.us/img97/6403/taskmanager.png This question is language agnostic and not tied to Qt/C++, i just want to know if Windows or Intel do to balance also single-threaded code on all cores. If they do, how does this technique work? All I can think of is, that kernel routines like reading from disk etc. is scheduled on all cores, but this won't improve performance significantly since the code still has to run synchronous to the kernel api calls. EDIT Do you know any tools to do a better analysis of single and/or multi-threaded programs than the poor Windows Task Manager?

    Read the article

  • Performance of java on different hardware?

    - by tangens
    In another SO question I asked why my java programs run faster on AMD than on Intel machines. But it seems that I'm the only one who has observed this. Now I would like to invite you to share the numbers of your local java performance with the SO community. I observed a big performance difference when watching the startup of JBoss on different hardware, so I set this program as the base for this comparison. For participation please download JBoss 5.1.0.GA and run: jboss-5.1.0.GA/bin/run.sh (or run.bat) This starts a standard configuration of JBoss without any extra applications. Then look for the last line of the start procedure which looks like this: [ServerImpl] JBoss (Microcontainer) [5.1.0.GA (build: SVNTag=JBoss_5_1_0_GA date=200905221634)] Started in 25s:264ms Please repeat this procedure until the printed time is somewhat stable and post this line together with some comments on your hardware (I used cpu-z to get the infos) and operating system like this: java version: 1.6.0_13 OS: Windows XP Board: ASUS M4A78T-E Processor: AMD Phenom II X3 720, 2.8 GHz RAM: 2*2 GB DDR3 (labeled 1333 MHz) GPU: NVIDIA GeForce 9400 GT disc: Seagate 1.5 TB (ST31500341AS) Use your votes to bring the fastest configuration to the top. I'm very curious about the results. EDIT: Up to now only a few members have shared their results. I'd really be interested in the results obtained with some other architectures. If someone works with a MAC (desktop) or runs an Intel i7 with less than 3 GHz, please once start JBoss and share your results. It will only take a few minutes.

    Read the article

  • What does "cpuid level" means ? Asking just for curiosity

    - by ogzylz
    For example, I put just 2 core info of a 16 core machine. What does "cpuid level : 6" line means? If u can provide info about lines "bogomips : 5992.10" and "clflush size : 64" I will be appreciated processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5992.10 clflush size : 64 cache_alignment : 128 address sizes : 40 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 1 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5985.23 clflush size : 64 cache_alignment : 128 address sizes : 40 bits physical, 48 bits virtual power management:

    Read the article

  • Writing fortran robust and "modern" code

    - by Blklight
    In some scientific environments, you often cannot go without FORTRAN as most of the developers only know that idiom, and there is lot of legacy code and related experience. And frankly, there are not many other cross-platform options for high performance programming ( C++ would do the task, but the syntax, zero-starting arrays, and pointers are too much for most engineers ;-) ). I'm a C++ guy but I'm stuck with some F90 projects. So, let's assume a new project must use FORTRAN (F90), but I want to build the most modern software architecture out of it. while being compatible with most "recent" compilers (intel ifort, but also including sun/HP/IBM own compilers) So I'm thinking of imposing: global variable forbidden, no gotos, no jump labels, "implicit none", etc. "object-oriented programming" (modules with datatypes + related subroutines) modular/reusable functions, well documented, reusable libraries assertions/preconditions/invariants (implemented using preprocessor statements) unit tests for all (most) subroutines and "objects" an intense "debug mode" (#ifdef DEBUG) with more checks and all possible Intel compiler checks possible (array bounds, subroutine interfaces, etc.) uniform and enforced legible coding style, using code processing tools C stubs/wrappers for libpthread, libDL (and eventually GPU kernels, etc.) C/C++ implementation of utility functions (strings, file operations, sockets, memory alloc/dealloc reference counting for debug mode, etc.) ( This may all seem "evident" modern programming assumptions, but in a legacy fortran world, most of these are big changes in the typical programmer workflow ) The goal with all that is to have trustworthy, maintainable and modular code. Whereas, in typical fortran, modularity is often not a primary goal, and code is trustworthy only if the original developer was very clever, and the code was not changed since then ! (i'm a bit joking here, but not much) I searched around for references about object-oriented fortran, programming-by-contract (assertions/preconditions/etc.), and found only ugly and outdated documents, syntaxes and papers done by people with no large-scale project involvement, and dead projects. Any good URL, advice, reference paper/books on the subject?

    Read the article

  • Execute less compiler anywhere on the computer

    - by Xenioz
    I'm having a little problem with executing *.cmd files so I can execute them anywhere on the computer with cmd. What I exactly want is to execute the less.cmd file, which support optional arguments and uses lessc.wsf (Less.js compiler for Windows Script Host) for converting less css to pure css. The less.cmd contains: ::For convenience @cscript //nologo "%~dp0lessc.wsf" %* What I've done so far: added absolute path to lessc.cmd to the PATH system variable and moved .cmd in the PATHTEXT system variable to the beginning. Also did this: From a command prompt; assoc .bat should return with ..bat=batfile If not assoc .bat=batfile to restore the default file type association. ftype batfile should return with batfile="%1" %* If not ftype batfile="%1" %* to restore the default "Open" action for the file type. This still doesn't work unless I approach the cmd file with a absolute path in cmd, if I enter lessc anywhere else then I get C:\Intel Intel is not recognized as an internal or external command, operable program or batch file. , I've restarted my computer more than once to be sure changes will take effect. I hope somebody has the answer.

    Read the article

  • Drawing an image in Java, slow as hell on a netbook.

    - by Norswap
    In follow-up to my previous questions (especially this one : http://stackoverflow.com/questions/2684123/java-volatileimage-slower-than-bufferedimage), i have noticed that simply drawing an Image (it doesn't matter if it's buffered or volatile, since the computer has no accelerated memory*, and tests shows it's doesn't change anything), tends to be very long. (*) System.out.println(GraphicsEnvironment.getLocalGraphicsEnvironment() .getDefaultScreenDevice().getAvailableAcceleratedMemory()); --> 0 How long ? For a 500x400 image, about 0.04 seconds. This is only drawing the image on the backbuffer (obtained via buffer strategy). Now considering that world of warcraft runs on that netbook (tough it is quite laggy) and that online java games seems to have no problem whatsoever, this is quite thought provoking. I'm quite certain I didn't miss something obvious, I've searched extensively the web, but nothing will do. So do any of you java whiz have an idea of what obscure problem might be causing this (or maybe it is normal, tough I doubt it) ? PS : As I'm writing this I realized this might be cause by my Linux installation (archlinux) tough I have the correct Intel driver. But my computer normally has "Integrated Intel Graphics Media Accelerator 950", which would mean it should have accelerated video memory somehow. Any ideas about this side of things ?

    Read the article

  • C Population Count of unsigned 64-bit integer with a maximum value of 15

    - by BitTwiddler1011
    I use a population count (hamming weight) function intensively in a windows c application and have to optimize it as much as possible in order to boost performance. More than half the cases where I use the function I only need to know the value to a maximum of 15. The software will run on a wide range of processors, both old and new. I already make use of the POPCNT instruction when Intel's SSE4.2 or AMD's SSE4a is present, but would like to optimize the software implementation (used as a fall back if no SSE4 is present) as much as possible. Currently I have the following software implementation of the function: inline int population_count64(unsigned __int64 w) { w -= (w 1) & 0x5555555555555555ULL; w = (w & 0x3333333333333333ULL) + ((w 2) & 0x3333333333333333ULL); w = (w + (w 4)) & 0x0f0f0f0f0f0f0f0fULL; return int(w * 0x0101010101010101ULL) 56; } So to summarize: (1) I would like to know if it is possible to optimize this for the case when I only want to know the value to a maximum of 15. (2) Is there a faster software implementation (for both Intel and AMD CPU's) than the function above?

    Read the article

  • Creative Gesture Camera in Processing

    - by user2892963
    I'm trying to use the creative gesture camera in Processing. I started with the Intel Perceptual Computing SDK, and ran into an issue. I want to get the hand openness, and I am running into some issues - no matter what, the hand.openness returns 0. It otherwise runs quite well... Some Sample code I'm trying to get to work: If you open your hand it starts printing to the console, close it and it stops. import intel.pcsdk.*; PXCUPipeline session; PXCMGesture.GeoNode hand = new PXCMGesture.GeoNode(); void setup() { session = new PXCUPipeline(this); if(!session.Init(PXCUPipeline.GESTURE)) exit(); } void draw() { background(0); if(session.AcquireFrame(false)) { if(session.QueryGeoNode(PXCMGesture.GeoNode.LABEL_BODY_HAND_PRIMARY|PXCMGesture.GeoNode.LABEL_OPEN, hand)) //Only when primary hand is open { rect(0, 0, 10, 10); println(hand.openness + " : " + frameCount); //Openness should be from 0 to 100 } session.ReleaseFrame(); } } Using the current version of Processing (2.0.3), Perceptual Computing SDK Version 7383.

    Read the article

  • Solaris 11.1: Changes to included FOSS packages

    - by alanc
    Besides the documentation changes I mentioned last time, another place you can see Solaris 11.1 changes before upgrading is in the online package repository, now that the 11.1 packages have been published to http://pkg.oracle.com/solaris/release/, as the “0.175.1.0.0.24.2” branch. (Oracle Solaris Package Versioning explains what each field in that version string means.) When you’re ready to upgrade to the packages from either this repo, or the support repository, you’ll want to first read How to Update to Oracle Solaris 11.1 Using the Image Packaging System by Pete Dennis, as there are a couple issues you will need to be aware of to do that upgrade, several of which are due to changes in the Free and Open Source Software (FOSS) packages included with Solaris, as I’ll explain in a bit. Solaris 11 can update more readily than Solaris 10 In the Solaris 10 and older update models, the way the updates were built constrained what changes we could make in those releases. To change an existing SVR4 package in those releases, we created a Solaris Patch, which applied to a given version of the SVR4 package and replaced, added or deleted files in it. These patches were released via the support websites (originally SunSolve, now My Oracle Support) for applying to existing Solaris 10 installations, and were also merged into the install images for the next Solaris 10 update release. (This Solaris Patches blog post from Gerry Haskins dives deeper into that subject.) Some of the restrictions of this model were that package refactoring, changes to package dependencies, and even just changing the package version number, were difficult to do in this hybrid patch/OS update model. For instance, when Solaris 10 first shipped, it had the Xorg server from X11R6.8. Over the first couple years of update releases we were able to keep it up to date by replacing, adding, & removing files as necessary, taking it all the way up to Xorg server release 1.3 (new version numbering begun after the X11R7 split of the X11 tree into separate modules gave each module its own version). But if you run pkginfo on the SUNWxorg-server package, you’ll see it still displayed a version number of 6.8, confusing users as to which version was actually included. We stopped upgrading the Xorg server releases in Solaris 10 after 1.3, as later versions added new dependencies, such as HAL, D-Bus, and libpciaccess, which were very difficult to manage in this patching model. (We later got libpciaccess to work, but HAL & D-Bus would have been much harder due to the greater dependency tree underneath those.) Similarly, every time the GNOME team looked into upgrading Solaris 10 past GNOME 2.6, they found these constraints made it so difficult it wasn’t worthwhile, and eventually GNOME’s dependencies had changed enough it was completely infeasible. Fortunately, this worked out for both the X11 & GNOME teams, with our management making the business decision to concentrate on the “Nevada” branch for desktop users - first as Solaris Express Desktop Edition, and later as OpenSolaris, so we didn’t have to fight to try to make the package updates fit into these tight constraints. Meanwhile, the team designing the new packaging system for Solaris 11 was seeing us struggle with these problems, and making this much easier to manage for both the development teams and our users was one of their big goals for the IPS design they were working on. Now that we’ve reached the first update release to Solaris 11, we can start to see the fruits of their labors, with more FOSS updates in 11.1 than we had in many Solaris 10 update releases, keeping software more up to date with the upstream communities. Of course, just because we can more easily update now, doesn’t always mean we should or will do so, it just removes the package system limitations from forcing the decision for us. So while we’ve upgraded the X Window System in the 11.1 release from X11R7.6 to 7.7, the Solaris GNOME team decided it was not the right time to try to make the jump from GNOME 2 to GNOME 3, though they did update some individual components of the desktop, especially those with security fixes like Firefox. In other parts of the system, decisions as to what to update were prioritized based on how they affected other projects, or what customer requests we’d gotten for them. So with all that background in place, what packages did we actually update or add between Solaris 11.0 and 11.1? Core OS Functionality One of the FOSS changes with the biggest impact in this release is the upgrade from Grub Legacy (0.97) to Grub 2 (1.99) for the x64 platform boot loader. This is the cause of one of the upgrade quirks, since to go from Solaris 11.0 to 11.1 on x64 systems, you first need to update the Boot Environment tools (such as beadm) to a new version that can handle boot environments that use the Grub2 boot loader. System administrators can find the details they need to know about the new Grub in the Administering the GRand Unified Bootloader chapter of the Booting and Shutting Down Oracle Solaris 11.1 Systems guide. This change was necessary to be able to support new hardware coming into the x64 marketplace, including systems using UEFI firmware or booting off disk drives larger than 2 terabytes. For both platforms, Solaris 11.1 adds rsyslog as an optional alternative to the traditional syslogd, and OpenSCAP for checking security configuration settings are compliant with site policies. Note that the support repo actually has newer versions of BIND & fetchmail than the 11.1 release, as some late breaking critical fixes came through from the community upstream releases after the Solaris 11.1 release was frozen, and made their way to the support repository. These are responsible for the other big upgrade quirk in this release, in which to upgrade a system which already installed those versions from the support repo, you need to either wait for those packages to make their way to the 11.1 branch of the support repo, or follow the steps in the aforementioned upgrade walkthrough to let the package system know it's okay to temporarily downgrade those. Developer Stack While Solaris 11.0 included Python 2.7, many of the bundled python modules weren’t packaged for it yet, limiting its usability. For 11.1, many more of the python modules include 2.7 versions (enough that I filtered them out of the below table, but you can always search on the package repository server for them. For other language runtimes and development tools, 11.1 expands the use of IPS mediated links to choose which version of a package is the default when the packages are designed to allow multiple versions to install side by side. For instance, in Solaris 11.0, GNU automake 1.9 and 1.10 were provided, and developers had to run them as either automake-1.9 or automake-1.10. In Solaris 11.1, when automake 1.11 was added, also added was a /usr/bin/automake mediated link, which points to the automake-1.11 program by default, but can be changed to another version by running the pkg set-mediator command. Mediated links were also used for the Java runtime & development kits in 11.1, changing the default versions to the Java 7 releases (the 1.7.0.x package versions), while allowing admins to switch links such as /usr/bin/javac back to Java 6 if they need to for their site, to deal with Java 7 compatibility or other issues, without having to update each usage to use the full versioned /usr/jdk/jdk1.6.0_35/bin/javac paths for every invocation. Desktop Stack As I mentioned before, we upgraded from X11R7.6 to X11R7.7, since a pleasant coincidence made the X.Org release dates line up nicely with our feature & code freeze dates for this release. (Or perhaps it wasn’t so coincidental, after all, one of the benefits of being the person making the release is being able to decide what schedule is most convenient for you, and this one worked well for me.) For the table below, I’ve skipped listing the packages in which we use the X11 “katamari” version for the Solaris package version (mainly packages combining elements of multiple upstream modules with independent version numbers), since they just all changed from 7.6 to 7.7. In the graphics drivers, we worked with Intel to update the Intel Integrated Graphics Processor support to support 3D graphics and kernel mode setting on the Ivy Bridge chipsets, and updated Nvidia’s non-FOSS graphics driver from 280.13 to 295.20. Higher up in the desktop stack, PulseAudio was added for audio support, and liblouis for Braille support, and the GNOME applications were built to use them. The Mozilla applications, Firefox & Thunderbird moved to the current Extended Support Release (ESR) versions, 10.x for each, to bring up-to-date security fixes without having to be on Mozilla’s agressive 6 week feature cycle release train. Detailed list of changes This table shows most of the changes to the FOSS packages between Solaris 11.0 and 11.1. As noted above, some were excluded for clarity, or to reduce noise and duplication. All the FOSS packages which didn't change the version number in their packaging info are not included, even if they had updates to fix bugs, security holes, or add support for new hardware or new features of Solaris. Package11.011.1 archiver/unrar 3.8.5 4.1.4 audio/sox 14.3.0 14.3.2 backup/rdiff-backup 1.2.1 1.3.3 communication/im/pidgin 2.10.0 2.10.5 compress/gzip 1.3.5 1.4 compress/xz not included 5.0.1 database/sqlite-3 3.7.6.3 3.7.11 desktop/remote-desktop/tigervnc 1.0.90 1.1.0 desktop/window-manager/xcompmgr 1.1.5 1.1.6 desktop/xscreensaver 5.12 5.15 developer/build/autoconf 2.63 2.68 developer/build/autoconf/xorg-macros 1.15.0 1.17 developer/build/automake-111 not included 1.11.2 developer/build/cmake 2.6.2 2.8.6 developer/build/gnu-make 3.81 3.82 developer/build/imake 1.0.4 1.0.5 developer/build/libtool 1.5.22 2.4.2 developer/build/makedepend 1.0.3 1.0.4 developer/documentation-tool/doxygen 1.5.7.1 1.7.6.1 developer/gnu-binutils 2.19 2.21.1 developer/java/jdepend not included 2.9 developer/java/jdk-6 1.6.0.26 1.6.0.35 developer/java/jdk-7 1.7.0.0 1.7.0.7 developer/java/jpackage-utils not included 1.7.5 developer/java/junit 4.5 4.10 developer/lexer/jflex not included 1.4.1 developer/parser/byaccj not included 1.14 developer/parser/java_cup not included 0.10 developer/quilt 0.47 0.60 developer/versioning/git 1.7.3.2 1.7.9.2 developer/versioning/mercurial 1.8.4 2.2.1 developer/versioning/subversion 1.6.16 1.7.5 diagnostic/constype 1.0.3 1.0.4 diagnostic/nmap 5.21 5.51 diagnostic/scanpci 0.12.1 0.13.1 diagnostic/wireshark 1.4.8 1.8.2 diagnostic/xload 1.1.0 1.1.1 editor/gnu-emacs 23.1 23.4 editor/vim 7.3.254 7.3.600 file/lndir 1.0.2 1.0.3 image/editor/bitmap 1.0.5 1.0.6 image/gnuplot 4.4.0 4.6.0 image/library/libexif 0.6.19 0.6.21 image/library/libpng 1.4.8 1.4.11 image/library/librsvg 2.26.3 2.34.1 image/xcursorgen 1.0.4 1.0.5 library/audio/pulseaudio not included 1.1 library/cacao 2.3.0.0 2.3.1.0 library/expat 2.0.1 2.1.0 library/gc 7.1 7.2 library/graphics/pixman 0.22.0 0.24.4 library/guile 1.8.4 1.8.6 library/java/javadb 10.5.3.0 10.6.2.1 library/java/subversion 1.6.16 1.7.5 library/json-c not included 0.9 library/libedit not included 3.0 library/libee not included 0.3.2 library/libestr not included 0.1.2 library/libevent 1.3.5 1.4.14.2 library/liblouis not included 2.1.1 library/liblouisxml not included 2.1.0 library/libtecla 1.6.0 1.6.1 library/libtool/libltdl 1.5.22 2.4.2 library/nspr 4.8.8 4.8.9 library/openldap 2.4.25 2.4.30 library/pcre 7.8 8.21 library/perl-5/subversion 1.6.16 1.7.5 library/python-2/jsonrpclib not included 0.1.3 library/python-2/lxml 2.1.2 2.3.3 library/python-2/nose not included 1.1.2 library/python-2/pyopenssl not included 0.11 library/python-2/subversion 1.6.16 1.7.5 library/python-2/tkinter-26 2.6.4 2.6.8 library/python-2/tkinter-27 2.7.1 2.7.3 library/security/nss 4.12.10 4.13.1 library/security/openssl 1.0.0.5 (1.0.0e) 1.0.0.10 (1.0.0j) mail/thunderbird 6.0 10.0.6 network/dns/bind 9.6.3.4.3 9.6.3.7.2 package/pkgbuild not included 1.3.104 print/filter/enscript not included 1.6.4 print/filter/gutenprint 5.2.4 5.2.7 print/lp/filter/foomatic-rip 3.0.2 4.0.15 runtime/java/jre-6 1.6.0.26 1.6.0.35 runtime/java/jre-7 1.7.0.0 1.7.0.7 runtime/perl-512 5.12.3 5.12.4 runtime/python-26 2.6.4 2.6.8 runtime/python-27 2.7.1 2.7.3 runtime/ruby-18 1.8.7.334 1.8.7.357 runtime/tcl-8/tcl-sqlite-3 3.7.6.3 3.7.11 security/compliance/openscap not included 0.8.1 security/nss-utilities 4.12.10 4.13.1 security/sudo 1.8.1.2 1.8.4.5 service/network/dhcp/isc-dhcp 4.1 4.1.0.6 service/network/dns/bind 9.6.3.4.3 9.6.3.7.2 service/network/ftp (ProFTPD) 1.3.3.0.5 1.3.3.0.7 service/network/samba 3.5.10 3.6.6 shell/conflict 0.2004.9.1 0.2010.6.27 shell/pipe-viewer 1.1.4 1.2.0 shell/zsh 4.3.12 4.3.17 system/boot/grub 0.97 1.99 system/font/truetype/liberation 1.4 1.7.2 system/library/freetype-2 2.4.6 2.4.9 system/library/libnet 1.1.2.1 1.1.5 system/management/cim/pegasus 2.9.1 2.11.0 system/management/ipmitool 1.8.10 1.8.11 system/management/wbem/wbemcli 1.3.7 1.3.9.1 system/network/routing/quagga 0.99.8 0.99.19 system/rsyslog not included 6.2.0 terminal/luit 1.1.0 1.1.1 text/convmv 1.14 1.15 text/gawk 3.1.5 3.1.8 text/gnu-grep 2.5.4 2.10 web/browser/firefox 6.0.2 10.0.6 web/browser/links 1.0 1.0.3 web/java-servlet/tomcat 6.0.33 6.0.35 web/php-53 not included 5.3.14 web/php-53/extension/php-apc not included 3.1.9 web/php-53/extension/php-idn not included 0.2.0 web/php-53/extension/php-memcache not included 3.0.6 web/php-53/extension/php-mysql not included 5.3.14 web/php-53/extension/php-pear not included 5.3.14 web/php-53/extension/php-suhosin not included 0.9.33 web/php-53/extension/php-tcpwrap not included 1.1.3 web/php-53/extension/php-xdebug not included 2.2.0 web/php-common not included 11.1 web/proxy/squid 3.1.8 3.1.18 web/server/apache-22 2.2.20 2.2.22 web/server/apache-22/module/apache-sed 2.2.20 2.2.22 web/server/apache-22/module/apache-wsgi not included 3.3 x11/diagnostic/xev 1.1.0 1.2.0 x11/diagnostic/xscope 1.3 1.3.1 x11/documentation/xorg-docs 1.6 1.7 x11/keyboard/xkbcomp 1.2.3 1.2.4 x11/library/libdmx 1.1.1 1.1.2 x11/library/libdrm 2.4.25 2.4.32 x11/library/libfontenc 1.1.0 1.1.1 x11/library/libfs 1.0.3 1.0.4 x11/library/libice 1.0.7 1.0.8 x11/library/libsm 1.2.0 1.2.1 x11/library/libx11 1.4.4 1.5.0 x11/library/libxau 1.0.6 1.0.7 x11/library/libxcb 1.7 1.8.1 x11/library/libxcursor 1.1.12 1.1.13 x11/library/libxdmcp 1.1.0 1.1.1 x11/library/libxext 1.3.0 1.3.1 x11/library/libxfixes 4.0.5 5.0 x11/library/libxfont 1.4.4 1.4.5 x11/library/libxft 2.2.0 2.3.1 x11/library/libxi 1.4.3 1.6.1 x11/library/libxinerama 1.1.1 1.1.2 x11/library/libxkbfile 1.0.7 1.0.8 x11/library/libxmu 1.1.0 1.1.1 x11/library/libxmuu 1.1.0 1.1.1 x11/library/libxpm 3.5.9 3.5.10 x11/library/libxrender 0.9.6 0.9.7 x11/library/libxres 1.0.5 1.0.6 x11/library/libxscrnsaver 1.2.1 1.2.2 x11/library/libxtst 1.2.0 1.2.1 x11/library/libxv 1.0.6 1.0.7 x11/library/libxvmc 1.0.6 1.0.7 x11/library/libxxf86vm 1.1.1 1.1.2 x11/library/mesa 7.10.2 7.11.2 x11/library/toolkit/libxaw7 1.0.9 1.0.11 x11/library/toolkit/libxt 1.0.9 1.1.3 x11/library/xtrans 1.2.6 1.2.7 x11/oclock 1.0.2 1.0.3 x11/server/xdmx 1.10.3 1.12.2 x11/server/xephyr 1.10.3 1.12.2 x11/server/xorg 1.10.3 1.12.2 x11/server/xorg/driver/xorg-input-keyboard 1.6.0 1.6.1 x11/server/xorg/driver/xorg-input-mouse 1.7.1 1.7.2 x11/server/xorg/driver/xorg-input-synaptics 1.4.1 1.6.2 x11/server/xorg/driver/xorg-input-vmmouse 12.7.0 12.8.0 x11/server/xorg/driver/xorg-video-ast 0.91.10 0.93.10 x11/server/xorg/driver/xorg-video-ati 6.14.1 6.14.4 x11/server/xorg/driver/xorg-video-cirrus 1.3.2 1.4.0 x11/server/xorg/driver/xorg-video-dummy 0.3.4 0.3.5 x11/server/xorg/driver/xorg-video-intel 2.10.0 2.18.0 x11/server/xorg/driver/xorg-video-mach64 6.9.0 6.9.1 x11/server/xorg/driver/xorg-video-mga 1.4.13 1.5.0 x11/server/xorg/driver/xorg-video-openchrome 0.2.904 0.2.905 x11/server/xorg/driver/xorg-video-r128 6.8.1 6.8.2 x11/server/xorg/driver/xorg-video-trident 1.3.4 1.3.5 x11/server/xorg/driver/xorg-video-vesa 2.3.0 2.3.1 x11/server/xorg/driver/xorg-video-vmware 11.0.3 12.0.2 x11/server/xserver-common 1.10.3 1.12.2 x11/server/xvfb 1.10.3 1.12.2 x11/server/xvnc 1.0.90 1.1.0 x11/session/sessreg 1.0.6 1.0.7 x11/session/xauth 1.0.6 1.0.7 x11/session/xinit 1.3.1 1.3.2 x11/transset 0.9.1 1.0.0 x11/trusted/trusted-xorg 1.10.3 1.12.2 x11/x11-window-dump 1.0.4 1.0.5 x11/xclipboard 1.1.1 1.1.2 x11/xclock 1.0.5 1.0.6 x11/xfd 1.1.0 1.1.1 x11/xfontsel 1.0.3 1.0.4 x11/xfs 1.1.1 1.1.2 P.S. To get the version numbers for this table, I ran a quick perl script over the output from: % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.1.0.0.24` \ | sort /tmp/11.1 % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.0.0.0.2` \ | sort /tmp/11.0

    Read the article

  • Pfsense mbuf full, what to do?

    - by sathia
    I noticed today that the MBUF usage has hit its limit. Apparently the site I'm running under pfsense is having some troubles too, I'd like to know if it would be safe to just sysctl kern.ipc.nmbclusters=65536 I wouldn't like to reboot the server, is it safe (or useful) to do it via pfsense shell? thanks you very much 2.0-RELEASE (amd64) built on Tue Sep 13 17:05:32 EDT 2011 State table size 35573/550000 MBUF Usage 25600/25600 CPU usage 2% Memory usage 17% (2GB) Swap 0% CPU: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz

    Read the article

  • Differences between KVR16N11H/8 and KVR16N11/8 memory except for height?

    - by rzetterberg
    I accidentally ordered KVR16N11/8 instead of KVR16N11H/8 and I'm wondering if I'm going to have compability issues with my Intel DP67DE motherboard. When searching for compatible RAM on Kingstons site for that motherboard the KVR16N11H/8 RAM was one of the compatible ones. The KVR16N11/8 did not show up as compatible for that motherboard. The only difference I can see is that they have different physical height, or am I missing something?

    Read the article

  • ESXi 5.0 GP Exception 13 World 2157

    - by rihatum
    1st time with Esxi 5.0, I have read the whitebox hcl and it states my box as compatible (Dell 960 Optiplex), I burnt Esxi install onto a cd and booted off it (without changing anything in bios) I only had a sata ssd connected, a usb flash 4gb (which i would have installed esxi on), It started loading fine and half way through it dumped a purple / pink screen with : GP Exception 13 World 2157 This system have 5GB RAM (2x2GB and 1x1GB), Intel VT is active in bios, Any suggestions or thoughts ? Will be grateful for your support Kind regards

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >