Search Results

Search found 20448 results on 818 pages for 'ip address'.

Page 77/818 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • Cisco ASA 5505 network route for static IP hosts

    - by TheCapn
    I've configured my internal VLAN using the most basic settings where ports 1-7 are assigned from a pool of addresses in the range 192.168.15.5 - 192.168.15.36. These hosts are given access to the internet and it works great. What I'm trying to set up now is allowing users who are connected to the device and specify their IP (say I connect and request 192.168.15.45) are given internet access and can still work alongside DHCP hosts. Those with a DHCP assigned address are blocked from the internet. Mostly the issue resides in that I am very new to working with the device. I feel that the solution is easy but I'm not looking in the right spots and don't have the correct terminology down to google it. Do I need to define access control lists? Group policies? a new VLAN? The rules that are set up seem to be specific to the entire /24 subnet but when I request a static IP outside of the DHCP range I get blocked from other hosts and the internet.

    Read the article

  • 2 Web Servers, 2 Domains, 1 WAN IP configuration

    - by Tillman32
    The Problem: I have 2 domains, 2 web servers, 1 WAN IP. This is on a home network, so I don't have any crazy router or anything with the right tools, at least I don't think I do. I have a Dlink DIR-655 router. I need to be able to forward the website to the right box. 1 server is hosting www.site1.com, and the other should be hosting, www.site2.com. I forwarded the domain, to a port that is forwarded to that box. wanip:1235, 1235 is then forwarded to the internal IP of site2's server. But when I go to www.site2.com I get the 404 page of www.site1.com. I need www.site2.com to go to the right server. Is this something I can do in the virtual hosts of www.site1.com or is it something else. Also, if this isn't entirely possible, or if its a big process, I can just move www.site1.com to the www.site2.com's server, and use virtual hosts, that is an option that I would be okay with.

    Read the article

  • how to get memory address

    - by levirg
    hey Folks, Is there any way in ruby to get the memory address of objects.. say.. (i = 5) is that possible to get the mem address of that object 5.. 'object_id_' is not that satisfying.. I just wanted to know how referencing to objects work on ruby, so i thought address will be useful, to get things done plugin memprof doesnt work on x_32bit, so is there any better way pls help me..., Any answer would be really appreciated... thanks, Regards levirg

    Read the article

  • hiding file in address bar

    - by michael
    hi, i've created a php pagination system, but i want to hide the _GET variable in the address bar. atm mine looks like this http://address.com/images.php?page=1 but i've seen a few site that have http://address.com/images/1/. just wondering how they go about this? can anyone point me in the right direction, cheers

    Read the article

  • Parsing ip addresses in php

    - by user2938780
    I am trying to get the number of active connections (Real Time) from a log file by IP connected and having a Play status but instead, it's giving me the total number of IP with status play. The number doesn't decrease at all. Keeps on increasing as soon as a new ip is added. How can I fix it? Here my code: $stringToParse = file_get_contents('wowzamediaserver_access.log'); preg_match_all('/\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/', $stringToParse, $matchOP); echo "Number of connections: ".sizeof(array_unique($matchOP[0])); HERE IS THE LOG: 2013-10-30 14:54:36 CET stop stream INFO 200 account1 - _defaultVHost_ account1 _definst_ 149.21 streamURL 1935 fullStreamURL IP_ADDRESS_1 http (cupertino) - 2013-10-30 14:56:12 CET play stream INFO 200 account2 - _defaultVHost_ account1 _definst_ 149.21 streamURL 1935 fullStreamURL IP_ADDRESS_2 rtmp (cupertino) - 2013-10-30 14:58:23 CET stop stream INFO 200 account2 - _defaultVHost_ account1 _definst_ 149.21 streamURL 1935 fullStreamURL IP_ADDRESS_2 rtmp (cupertino) - 2013-10-30 14:58:39 CET play stream INFO 200 account1 - _defaultVHost_ account1 _definst_ 149.21 streamURL 1935 fullStreamURL IP_ADDRESS_1 http (cupertino) - 2013-10-30 14:59:12 CET play stream INFO 200 account2 - _defaultVHost_ account1 _definst_ 149.21 streamURL 1935 fullStreamURL IP_ADDRESS_2 rtmp (cupertino) - I want to be able to count the IP whenever it has a "PLAY" status and don't count it whenever it's "STOP" 2013-10-30 14:59:00 CET play stream INFO 200 tv2vielive - _defaultVHost_ tv2vielive _definst_ 0.315 [any] 1935 rtmp://tv2vie.zion3cloud.com:1935/tv2vielive 78.247.255.186 rtmp http://www.tv2vie.org/swf/flowplayer-3.2.16.swf WIN 11,7,700,202 92565864 3576 3455 1 0 0 0 tv2vielive - - - - - rtmp://tv2vie.zion3cloud.com:1935/tv2vielive/tv2vielive rtmp://tv2vie.zion3cloud.com:1935/tv2vielive/tv2vielive - rtmp://tv2vie.zion3cloud.com:1935/tv2vielive - 2013-10-30 14:59:04 CET stop stream INFO 200 tv2vielive - _defaultVHost_ tv2vielive _definst_ 4.75 [any] 1935 rtmp://tv2vie.zion3cloud.com:1935/tv2vielive 78.247.255.186 rtmp http://www.tv2vie.org/swf/flowplayer-3.2.16.swf WIN 11,7,700,202 92565864 3576 512571 1 7222 0 503766 tv2vielive - - - - - rtmp://tv2vie.zion3cloud.com:1935/tv2vielive/tv2vielive rtmp://tv2vie.zion3cloud.com:1935/tv2vielive/tv2vielive - rtmp://tv2vie.zion3cloud.com:1935/tv2vielive - Any solutions? I have even tried the first answer solution but getting "0" play connections. $stringToParse = file_get_contents('wowzamediaserver_access.log'); $pattern = '~^.* play.* ( ([0-9]{1,3}+\.){3,3}[0-9]{1,3}).*$~m'; preg_match_all($pattern, $stringToParse, $matches); echo count($matches[1]) . ' play actions'; But whenever I use my code, I am getting "Number of connections: xxxxx(actual count of IPs). My concern is that I only need the count of IPs with PLAY status. If that IP changes to STOP then it wont count.

    Read the article

  • Organize address cache

    - by Orsol
    Hi, I need to organize cache in mySql database for address - coordinates. What is the best practice to store address? Do i need to compress address string or use it as is? edit: Ok, let's I reassert my question. How to store long (up to 512) string in database if I need to search by exactly this string in future.

    Read the article

  • Bind9 as a caching resolver fails with mismatch ID on localhost but not external IP

    - by argibbs
    I'm running Ubuntu 12.04 LTS on a machine on my private network. I have bind9 installed (v9.8.1-P1) via aptitude, so it appears to have put all the bits in the right places and the service starts automatically. I plan on adding some zones later, but first I'm just trying to get it working as a caching resolver. I installed bind, configured it, and starting using it. Initially I thought it was working ok, but then I found some sites weren't being resolved. I've pinned it down to being linked to the size of the result and bind failing-over to TCP mode. So: I'm trying to find out why bind is failing when I query for domain info and the result is 512 bytes (causing a truncation and retry on TCP). Specifically it fails with ID mismatches if I point dig at localhost, but works when I query the machine's own IP (192.168.0.2). This appears to be backwards to the problem that most people have when using bind (fails on external ip, works on localhost). If I do dig @localhost google.com (which has a response of <512 bytes) then it works; I get no warnings, and plenty of output. $ dig @localhost google.com ; <<>> DiG 9.8.1-P1 <<>> @localhost google.com [snip lots of output] ;; Query time: 39 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 17 23:08:34 2013 ;; MSG SIZE rcvd: 495 If I do dig @localhost play.google.com (which has a larger response) then I get back something like: $ dig @localhost play.google.com ;; Truncated, retrying in TCP mode. ;; ERROR: ID mismatch: expected ID 3696, got 27130 This seems to be standard, documented behaviour - when the UDP response is large (here 'large' == 512 bytes) it falls back to TCP. The ID mismatch is not expected though. If I do dig @192.168.0.2 play.google.com then I still get the warning about using TCP mode, but it otherwise works $ dig @192.168.0.2 play.google.com ;; Truncated, retrying in TCP mode. ; <<>> DiG 9.8.1-P1 <<>> @192.168.0.2 play.google.com [snip most of the output] ;; Query time: 5 msec ;; SERVER: 192.168.0.2#53(192.168.0.2) ;; WHEN: Thu Oct 17 23:05:55 2013 ;; MSG SIZE rcvd: 521 At the moment I've not set up any zones in my local instance, so it's just acting as a caching resolver. My options config is pretty much unchanged from standard, I've got the following set: options { directory "/var/cache/bind"; allow-query { 192.168/16; 127.0.0.1; }; forwarders { 8.8.8.8; 8.8.4.4; }; dnssec-validation auto; edns-udp-size 4096 ; allow-transfer { any; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; And my /etc/resolv.conf is just nameserver 127.0.0.1 search .local The problem definitely seems linked to the failover to TCP mode: if I do dig +bufsize=4096 @localhost play.google.com then it works; no warning about failover to TCP, no ID mismatch, and a standard looking result. To be honest, if there was a way to force bind to use a much larger UDP buffer, that'd probably be good enough for me, but all I've been able to find mention of is max-udp-size 4096 and that doesn't change the behaviour in any way. I've also tried setting edns-udp-size 512 in case the problem is some weird EDNS issue with my router (which seems unlikely since the +bufsize=4096 flag works fine). I've also tried dig +trace @localhost play.google.com; this works. No truncation/TCP warning, and a full result. I've also tried changing the servers used in the forwarder (e.g. to OpenDNS), but that makes no difference. There's one last data point: if I repetitively do dig @localhost play.google.com I don't always get an ID mismatch, but sometimes a REFUSED error. I'm much more likely to get a REFUSED error if I dig the non-localhost IP (192.168.0.2) first: $ dig @localhost play.google.com ;; Truncated, retrying in TCP mode. ; <<>> DiG 9.8.1-P1 <<>> @localhost play.google.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 35104 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;play.google.com. IN A ;; Query time: 4 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 17 23:20:13 2013 ;; MSG SIZE rcvd: 33 Any insights or things to try would be much appreciated.

    Read the article

  • Bridging LXC containers to host eth0 so they can have a public IP

    - by Vianney Stroebel
    UPDATE: I found the solution there: http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge#No_traffic_gets_trough_.28except_ARP_and_STP.29 # cd /proc/sys/net/bridge # ls bridge-nf-call-arptables bridge-nf-call-iptables bridge-nf-call-ip6tables bridge-nf-filter-vlan-tagged # for f in bridge-nf-*; do echo 0 $f; done But I'd like to have expert opinions on this: is it safe to disable all bridge-nf-*? What are they here for? END OF UPDATE I need to bridge LXC containers to the physical interface (eth0) of my host, reading numerous tutorials, documents and blog posts on the subject. I need the containers to have their own public IP (which I've previously done KVM/libvirt). After two days of searching and trying, I still can't make it work with LXC containers. The host runs a freshly installed Ubuntu Server Quantal (12.10) with only libvirt (which I'm not using here) and lxc installed. I created the containers with : lxc-create -t ubuntu -n mycontainer So they also run Ubuntu 12.10. Content of /var/lib/lxc/mycontainer/config is: lxc.utsname = mycontainer lxc.mount = /var/lib/lxc/test/fstab lxc.rootfs = /var/lib/lxc/test/rootfs lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethmycontainer lxc.network.ipv4 = 179.43.46.233 lxc.network.hwaddr= 02:00:00:86:5b:11 lxc.devttydir = lxc lxc.tty = 4 lxc.pts = 1024 lxc.arch = amd64 lxc.cap.drop = sys_module mac_admin mac_override lxc.pivotdir = lxc_putold # uncomment the next line to run the container unconfined: #lxc.aa_profile = unconfined lxc.cgroup.devices.deny = a # Allow any mknod (but not using the node) lxc.cgroup.devices.allow = c *:* m lxc.cgroup.devices.allow = b *:* m # /dev/null and zero lxc.cgroup.devices.allow = c 1:3 rwm lxc.cgroup.devices.allow = c 1:5 rwm # consoles lxc.cgroup.devices.allow = c 5:1 rwm lxc.cgroup.devices.allow = c 5:0 rwm #lxc.cgroup.devices.allow = c 4:0 rwm #lxc.cgroup.devices.allow = c 4:1 rwm # /dev/{,u}random lxc.cgroup.devices.allow = c 1:9 rwm lxc.cgroup.devices.allow = c 1:8 rwm lxc.cgroup.devices.allow = c 136:* rwm lxc.cgroup.devices.allow = c 5:2 rwm # rtc lxc.cgroup.devices.allow = c 254:0 rwm #fuse lxc.cgroup.devices.allow = c 10:229 rwm #tun lxc.cgroup.devices.allow = c 10:200 rwm #full lxc.cgroup.devices.allow = c 1:7 rwm #hpet lxc.cgroup.devices.allow = c 10:228 rwm #kvm lxc.cgroup.devices.allow = c 10:232 rwm Then I changed my host /etc/network/interfaces to: auto lo iface lo inet loopback auto br0 iface br0 inet static bridge_ports eth0 bridge_fd 0 address 92.281.86.226 netmask 255.255.255.0 network 92.281.86.0 broadcast 92.281.86.255 gateway 92.281.86.254 dns-nameservers 213.186.33.99 dns-search ovh.net When I try command line configuration ("brctl addif", "ifconfig eth0", etc.) my remote host becomes inaccessible and I have to hard reboot it. I changed the content of /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces to: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 179.43.46.233 netmask 255.255.255.255 broadcast 178.33.40.233 gateway 92.281.86.254 It takes several minutes for mycontainer to start (lxc-start -n mycontainer). I tried replacing gateway 92.281.86.254 by : post-up route add 92.281.86.254 dev eth0 post-up route add default gw 92.281.86.254 post-down route del 92.281.86.254 dev eth0 post-down route del default gw 92.281.86.254 My container then starts instantly. But whatever configuration I set in /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces, I cannot ping from mycontainer to any IP (including the host's) : ubuntu@mycontainer:~$ ping 92.281.86.226 PING 92.281.86.226 (92.281.86.226) 56(84) bytes of data. ^C --- 92.281.86.226 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5031ms And my host cannot ping the container: root@host:~# ping 179.43.46.233 PING 179.43.46.233 (179.43.46.233) 56(84) bytes of data. ^C --- 179.43.46.233 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms My container's ifconfig: ubuntu@mycontainer:~$ ifconfig eth0 Link encap:Ethernet HWaddr 02:00:00:86:5b:11 inet addr:179.43.46.233 Bcast:255.255.255.255 Mask:0.0.0.0 inet6 addr: fe80::ff:fe79:5a31/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:6 overruns:0 frame:0 TX packets:54 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4070 (4.0 KB) TX bytes:4168 (4.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2496 (2.4 KB) TX bytes:2496 (2.4 KB) My host's ifconfig: root@host:~# ifconfig br0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b inet addr:92.281.86.226 Bcast:91.121.67.255 Mask:255.255.255.0 inet6 addr: fe80::4e72:b9ff:fe43:652b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1453 errors:0 dropped:18 overruns:0 frame:0 TX packets:1630 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145125 (145.1 KB) TX bytes:299943 (299.9 KB) eth0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3178 errors:0 dropped:0 overruns:0 frame:0 TX packets:1637 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:298263 (298.2 KB) TX bytes:309167 (309.1 KB) Interrupt:20 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:300 (300.0 B) TX bytes:300 (300.0 B) vethtest Link encap:Ethernet HWaddr fe:0d:7f:3e:70:88 inet6 addr: fe80::fc0d:7fff:fe3e:7088/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4168 (4.1 KB) TX bytes:4250 (4.2 KB) virbr0 Link encap:Ethernet HWaddr de:49:c5:66:cf:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) I have disabled lxcbr0 (USE_LXC_BRIDGE="false" in /etc/default/lxc). root@host:~# brctl show bridge name bridge id STP enabled interfaces br0 8000.4c72b943652b no eth0 vethtest I have configured the IP 179.43.46.233 to point to 02:00:00:86:5b:11 in my hosting provider (OVH) config panel. (The IPs in this post are not the real ones.) Thanks for reading this long question! :-) Vianney

    Read the article

  • Limit TCP requests per IP

    - by asmo
    Hello! I'm wondering how to limit the TCP requests per client (per specific IP) in Java. For example, I would like to allow a maximum of X requests per Y seconds for each client IP. I thought of using static Timer/TimerTask in combination with a HashSet of temporary restricted IPs. private static final Set<InetAddress> restrictedIPs = Collections.synchronizedSet(new HashSet<InetAddress>()); private static final Timer restrictTimer = new Timer(); So when a user connects to the server, I add his IP to the restricted list, and start a task to unrestrict him in X seconds. restrictedIPs.add(socket.getInetAddress()); restrictTimer.schedule(new TimerTask() { public void run() { restrictedIPs.remove(socket.getInetAddress()); } }, MIN_REQUEST_INTERVAL); My problem is that at the time the task will run, the socket object may be closed, and the remote IP address won't be accessible anymore... Any ideas welcomed! Also, if someone knows a Java-framework-built-in way to achieve this, I'd really like to hear it.

    Read the article

  • Rewriting Live TCP/IP (Layer 4) Streams

    - by user213060
    I want to rewrite TCP/IP streams. Ettercap's etterfilter command lets you perform simple live replacements of TCP/IP data based on fixed strings or regexes. Example: if (ip.proto == TCP && tcp.dst == 80) { if (search(DATA.data, "gzip")) { replace("gzip", " "); msg("whited out gzip\n"); } } if (ip.proto == TCP && tcp.dst == 80) { if (search(DATA.data, "deflate")) { replace("deflate", " "); msg("whited out deflate\n"); } } http://ettercap.sourceforge.net/forum/viewtopic.php?t=2833 I would like to rewrite streams based on my own filter program instead of just simple string replacements. Anyone have an idea of how to do this? Is there anything other than Ettercap that can do live replacement like this, maybe as a plugin to a VPN software or something? The rewriting should occur at the transport layer (Layer 4) as it does in this example, instead of a lower layer packet-based approach. Thanks!

    Read the article

  • dnsmasq acts as the DHCP server for selected nodes overriding the existing DHCP server on the same LAN?

    - by user183394
    I am trying to set up a small "lab" at home. Like many modern homes, I have a regular DSL service which comes with a 2Wire 3600HGV router, which acts also as a DHCP server. Since I would like to PXE boot a few computers in my "lab" The 2Wire is inflexible to adjustments that I want to do I have used dnsmasq at work so I would like to use dnsmasq as the DHCP server for the few nodes in my "lab" if feasible. In the dnsmasq man page, there is the following: [...] -K, --dhcp-authoritative (IPv4 only) Should be set when dnsmasq is definitely the only DHCP server on a network. It changes the behaviour from strict RFC compliance so that DHCP requests on unknown leases from unknown hosts are not ignored. This allows new hosts to get a lease without a tedious timeout under all circumstances. It also allows dnsmasq to rebuild its lease database without each client needing to reacquire a lease, if the database is lost. [...] As far as I know, the ISC DHCP server can use the following to do what I would like to accomplish: authoritative; [...] subnet 192.168.1.0 netmask 255.255.255.0 { host nb0 { # only give DHCP information to this computer: hardware ethernet e8:9a:8f:17:70:42; fixed-address 192.168.1.10; option subnet-mask 255.255.255.0; option routers 192.168.1.254; option domain-name-servers 192.168.1.254; # Non-essential DHCP options filename "/pxelinux.0"; } [...] But I much prefer dnsmasq's "all-in-one-ness". My question: do I have to couple the -K option with something else? As shown in the example above, the ISC DHCP server requires the mac addresses of managed nodes to be explicitly specified. Does dnsmasq have something similar? FYI, the machine on which I plan to run dnsmasq runs CentOS 6.3 64bit. It has a statically assigned IP address: 192.168.1.3.

    Read the article

  • Disable iPhone Yahoo contacts sync

    - by User
    Every time I plug in my iPhone, iTunes pops up a dialog asking for sync with Yahoo contacts. after I cancel, it pops up again, for 4-5 more times. But the 'Sync Yahoo!Address Book contacts' option is disabled in iTunes and I definitely don't want this to happen. If there any way to tell iTunes to stop trying to sync with Yahoo?

    Read the article

  • Send a variable on the heap to another thread

    - by user1201889
    I have a strange problem in C++. An address of a Boolean gets "destroyed" but it doesn't get touched. I know that there are beater way's to accomplish what I try to do, but I want to know what I do wrong. I have a main class; this main class contains a vector of another class. There is a strange problem when a new instance gets created of this object. This is how my code works: There will start a thread when the constructor gets called of the “2nd”object. This thread gets as Parameter a struct. This is the struct: struct KeyPressData { vector<bool> *AutoPressStatus; vector<int> *AutoPressTime; bool * Destroy; bool * Ready; }; The struct gets filled in the constructor: MultiBoxClient::MultiBoxClient() { //init data DestroyThread = new bool; ReadyThread = new bool; AutoThreadData = new KeyPressData; //Reseting data *DestroyThread = false; *ReadyThread = false; //KeyPressData configurating AutoThreadData->AutoPressStatus = &AutoPressStatus; AutoThreadData->AutoPressTime = &AutoPressTime; AutoThreadData->Destroy = DestroyThread; AutoThreadData->Ready = ReadyThread; //Start the keypress thread CreateThread(NULL,NULL,(LPTHREAD_START_ROUTINE)AutoKeyThread,AutoThreadData,NULL,NULL); } As long as the constructor is running will the program run fine. But when the constructor closes the address of the “AutoThreadData-Destroy” will get corrupted. The program will crash when I call the value of the pointer. void WINAPI AutoKeyThread(void * ThreadData) { KeyPressData * AutoThreadData = (KeyPressData*)ThreadData; while(true) { if(*AutoThreadData->Destroy == true) //CRASH { *AutoThreadData->Ready = true; return; } Sleep(100); } } What did I test: I logged the address of the AutoThreadData and the AutoThreadData-Destroy when the constrcutor is running and clossed; the AutoThreadData address is equal to AutoThreadData when the constructor is closed. So there is no problem here. The address of AutoThreadData-Destroy gets destroyed when the constructor is closed. But how can this happen? The Boolean is on the heap and the KeyPressData struct (AutoThreadData) is on the heap. Destroy before: 00A85328 Destroy after: FEEEFEEE Can someone maby explain why this crash? I know that I can send a pointer to my class to the thread. But I want to know what goes wrong here. That way I can learn from my mistakes. Could someone help me with this problem? Thanks!

    Read the article

  • USB Drive Not recognized

    - by user36582
    My Friend's Pen Drive, which was working well very well just few days ago, is not being recognized after getting used by a virus affected machine. Its not on fdisk -l or lsusb However in dmesg I can see the following: [ 977.300013] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 977.420014] usb 5-2: device descriptor read/64, error -71 [ 977.644023] usb 5-2: device descriptor read/64, error -71 [ 977.860013] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 977.980013] usb 5-2: device descriptor read/64, error -71 [ 978.204013] usb 5-2: device descriptor read/64, error -71 [ 978.420013] usb 5-2: new full speed USB device using uhci_hcd and address 4 [ 978.828015] usb 5-2: device not accepting address 4, error -71 [ 978.940015] usb 5-2: new full speed USB device using uhci_hcd and address 5 [ 979.348013] usb 5-2: device not accepting address 5, error -71 [ 979.348292] hub 5-0:1.0: unable to enumerate USB device on port 2 [ 1017.848015] usb 5-2: new full speed USB device using uhci_hcd and address 6 [ 1017.968012] usb 5-2: device descriptor read/64, error -71 [ 1018.192017] usb 5-2: device descriptor read/64, error -71 [ 1018.408014] usb 5-2: new full speed USB device using uhci_hcd and address 7 [ 1018.528012] usb 5-2: device descriptor read/64, error -71 [ 1018.752023] usb 5-2: device descriptor read/64, error -71 [ 1018.968012] usb 5-2: new full speed USB device using uhci_hcd and address 8 [ 1019.376019] usb 5-2: device not accepting address 8, error -71 [ 1019.488011] usb 5-2: new full speed USB device using uhci_hcd and address 9 [ 1019.896016] usb 5-2: device not accepting address 9, error -71 [ 1019.896308] hub 5-0:1.0: unable to enumerate USB device on port 2 [ 1049.984016] usb 5-1: new full speed USB device using uhci_hcd and address 10 [ 1050.104014] usb 5-1: device descriptor read/64, error -71 [ 1050.328014] usb 5-1: device descriptor read/64, error -71 [ 1050.544014] usb 5-1: new full speed USB device using uhci_hcd and address 11 [ 1050.664018] usb 5-1: device descriptor read/64, error -71 [ 1050.888019] usb 5-1: device descriptor read/64, error -71 [ 1051.104025] usb 5-1: new full speed USB device using uhci_hcd and address 12 [ 1051.512014] usb 5-1: device not accepting address 12, error -71 [ 1051.624101] usb 5-1: new full speed USB device using uhci_hcd and address 13 [ 1052.032014] usb 5-1: device not accepting address 13, error -71 [ 1052.032991] hub 5-0:1.0: unable to enumerate USB device on port 1 What these Errors actually mean and how Can I get this pen drive Back to work ??

    Read the article

  • apt-get update getting 404 on debian lenny

    - by JoelFan
    Here is my /etc/apt/sources.list ###### Debian Main Repos deb http://ftp.us.debian.org/debian/ lenny main contrib non-free ###### Debian Update Repos deb http://security.debian.org/ lenny/updates main contrib non-free deb http://ftp.us.debian.org/debian/ lenny-proposed-updates main contrib non-free When I do: # apt-get update I'm getting some good lines, then: Err http://ftp.us.debian.org lenny/contrib Packages 404 Not Found [IP: 35.9.37.225 80] Err http://ftp.us.debian.org lenny/non-free Packages 404 Not Found [IP: 35.9.37.225 80] Err http://ftp.us.debian.org lenny-proposed-updates/main Packages 404 Not Found [IP: 35.9.37.225 80] Err http://ftp.us.debian.org lenny-proposed-updates/contrib Packages 404 Not Found [IP: 35.9.37.225 80] Err http://ftp.us.debian.org lenny-proposed-updates/non-free Packages 404 Not Found [IP: 35.9.37.225 80] Err http://ftp.us.debian.org lenny/main Packages 404 Not Found [IP: 35.9.37.225 80] W: Failed to fetch http://security.debian.org/dists/lenny/updates/main/binary-i386/Packages 404 Not Found [IP: 149.20.20.6 80] W: Failed to fetch http://security.debian.org/dists/lenny/updates/contrib/binary-i386/Packages 404 Not Found [IP: 149.20.20.6 80] W: Failed to fetch http://security.debian.org/dists/lenny/updates/non-free/binary-i386/Packages 404 Not Found [IP: 149.20.20.6 80] W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny/contrib/binary-i386/Packages 404 Not Found [IP: 35.9.37.225 80] W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny/non-free/binary-i386/Packages 404 Not Found [IP: 35.9.37.225 80] W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny-proposed-updates/main/binary-i386/Packages 404 Not Found [IP: 35.9.37.225 80] W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny-proposed-updates/contrib/binary-i386/Packages 404 Not Found [IP: 35.9.37.225 80] W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny-proposed-updates/non-free/binary-i386/Packages 404 Not Found [IP: 35.9.37.225 80] W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny/main/binary-i386/Packages 404 Not Found [IP: 35.9.37.225 80] E: Some index files failed to download, they have been ignored, or old ones used instead. Now what?

    Read the article

  • How to connect devices behind Comcast router/modem with devices behind wireless router

    - by deeperDATA
    I know this is going to seem like a simple solution but I have been unable to find a clear answer through Google. Simple office setup: I have a Comcast modem/router that has 4 hard wired ports. In one of those ports I have a Cisco wireless router which also has 4 of its own ports. What is the method for getting devices behind the modem/router to ping/communicate with devices behind the wireless router? They are all on the same subnet but the IP ranges differ. The router produces 192.168.1.1 by default while the Comcast modem/router produces 10.1.10.1 by default. I think what I'm attempting to do might be considered "extending" the modem/router's network but I'm not sure. Thank you in advance for your assistance.

    Read the article

  • 301 redirect Rule For Load Balance F5 BigIp

    - by Kshah
    I have a load balancer F5 Big ip for my website. Currently, I am having 302 redirect in place; however, I wanted to apply 301 but dont know how. For example: My website (abc.com) when typed 302 redirects to abc.com/index and when typed www.abc.com 302 redirects www.abc.com/index. I wanted to have a rule which will help me in abc.com - 301 redirect - www.abc.com/index abc.com/index - 301 redirect - www.abc.com/index www.abc.com - 301 redirect - www.abc.com/index Below is the code that my tech person is trying: Redirect to WWW when HTTP_REQUEST { if { [HTTP::host] equals "abc.com" or [HTTP::host] equals "abc.co.in" or [HTTP::host] equals "www.abc.co.in" } { if {!( [HTTP::path] equals "/")} { HTTP::respond 301 Location "http://www.abc.com[HTTP::path]" } } } Redirect POST when HTTP_REQUEST { if { [HTTP::method] equals "POST" } { persist source_addr pool shop_shop_vr4_http } } Redirect-VR4 HOMEPAGE when HTTP_REQUEST { if { [HTTP::path] equals "/" or [HTTP::path] starts_with "/target/" or [HTTP::path] starts_with "/logs/" or [HTTP::path] starts_with "/config/" } { HTTP::redirect "http://[HTTP::host]/index.jsp.vr" } }

    Read the article

  • Can fragments of a packet be refragmented again?

    - by gsinha
    In IPv4, fragmentation is done by routers on way to the destination if DF(do not fragment) flag is not set in the IP packet. Once a packet is fragmented, its fragments may take different paths (due to various reasons like topology changes) to the destination. If, on some link again in the path to destination, one routers find that the link MTU is smaller than the frame size, then either the packet needs to be fragmented or dropped. Can fragments of a packet be refragmented again? If yes, what will be the value of MF flag in the new individual fragments created by this?

    Read the article

  • NAT for Sprint Nexus S "Portable Wi-Fi hotspot"

    - by Jon Rodriguez
    I am on a 2010 Macbook Air connected to the web over wifi tethering on my Sprint Nexus S. I want to be able to host a few files using MAMP, but it seems that Sprint is running a NAT. When I query checkip.dyndns.org right now, it returns 68.27.228.75. However, trying to navigate to that IP fails (even though I do have MAMP's Apache running on port 80, as verified via loopback). When I whois 68.27.228.75, it appears to be a Sprint address, with NetName "SPRINTPCS" and OrgName "Sprint Nextel Corporation". So, is there some way I can circumvent Sprint's NAT to allow people to connect to my server that is running on a Nexus S Portable Wi-Fi hotspot?

    Read the article

  • DHCP not working after NetBIOS over TCP/IP disabled

    - by user27515
    I want to disable the "NetBIOS over TCP/IP" device in the device manager to free port 445. But after doing that my Internet stops working. I'm connected to a WLan router using DHCP on WinXP, and it is stuck forever in the "acquire network address" step. Why does it misbehave like that? I don't need NetBIOS!

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >