nathan strong - Page 77

What is wrong with my home network? (Routing and connection issues)

- by David

I have a corporate laptop that was provided to me by a client and I'm having some rather odd difficulties with it when I put the laptop on my home network. When I first brought the machine home it behaved like any other laptop. Once it was connected to the network it was assigned an IP address and I could remote into it just fine using the machine name. Lately though, whenever I put this laptop on my network I am not able to ping or RDP into the machine as the host name doesn't properly resolve. Additionally I'm able to see the device and it's assigned IP address clearly in my router firmware. This gets even more strange as now when I try to ping it's IP address listed in my router, I see that it's actually trying to ping my own machine (screenshot of this very odd event below). This has actually driven me crazy to the point that I have actually replaced my router (it was behaving oddly in other ways), and I'm continuing to have these problems. The above ping capture is from the new router. As far as network goes I am now currently using an NetGear R7000 Nighthawk and I haven't customized any of the networking settings in the router just yet (installed yesterday). I would appreciate any advice possible and would be happy to provide further diagnostic information. Networking isn't my strong suit, so I'm not even sure where to begin unraveling this thing.

Read the article

System requirements for running windows 8 (basic office use) in virtualbox (ubuntu as host os)

- by Tor Thommesen

I want to run windows 8 as a guest os with virtualbox on some thinkpad (haven't bought one yet) running Ubuntu 12.04. Apart from virtualizing windows 8 (mostly just for use with the office suite app) my needs are very modest, I don't need much more than emacs and a browser. What I'd like to know is what kind of specs will be necessary to run windows 8 well as a vm, using the office apps. It would be a shame to waste money on overpowered hardware. Are there any official guidelines from oracle or windows on this? Would this lenovo x220, for example, be sufficiently strong? The specs below were taken from this review. Intel Core i5-2520M dual-core processor (2.5GHz, 3MB cache, 3.2GHz Turbo frequency) Windows 7 Professional (64-bit) 12.5-inch Premium HD (1366 x 768) LED Backlit Display (IPS) Intel Integrated HD Graphics 4GB DDR3 (1333MHz) 320GB Hitachi Travelstar hard drive (Z7K320) Intel Centrino Advanced-N 6205 (Taylor Peak) 2x2 AGN wireless card Intel 82579LM Gigabit Ethernet 720p High Definition webcam Fingerprint reader 6-cell battery (63Wh) and optional slice battery (65Wh) Dimensions: 12 (L) x 8.2 (W) x 0.5-1.5 (H) inches with 6-cell battery Weight: 3.5 pounds with 6-cell battery 4.875 pounds with 6-cell battery and optional external battery slice Price as configured: $1,299.00 (starting at $979.00)

Read the article

Combining MVVM Light Toolkit and Unity 2.0

- by Alan Cordner

This is more of a commentary than a question, though feedback would be nice. I have been tasked to create the user interface for a new project we are doing. We want to use WPF and I wanted to learn all of the modern UI design techniques available. Since I am fairly new to WPF I have been researching what is available. I think I have pretty much settled on using MVVM Light Toolkit (mainly because of its "Blendability" and the EventToCommand behavior!), but I wanted to incorporate IoC also. So, here is what I have come up with. I have modified the default ViewModelLocator class in a MVVM Light project to use a UnityContainer to handle dependency injections. Considering I didn't know what 90% of these terms meant 3 months ago, I think I'm on the right track. // Example of MVVM Light Toolkit ViewModelLocator class that implements Microsoft // Unity 2.0 Inversion of Control container to resolve ViewModel dependencies. using Microsoft.Practices.Unity; namespace MVVMLightUnityExample { public class ViewModelLocator { public static UnityContainer Container { get; set; } #region Constructors static ViewModelLocator() { if (Container == null) { Container = new UnityContainer(); // register all dependencies required by view models Container .RegisterType<IDialogService, ModalDialogService>(new ContainerControlledLifetimeManager()) .RegisterType<ILoggerService, LogFileService>(new ContainerControlledLifetimeManager()) ; } } /// <summary> /// Initializes a new instance of the ViewModelLocator class. /// </summary> public ViewModelLocator() { ////if (ViewModelBase.IsInDesignModeStatic) ////{ //// // Create design time view models ////} ////else ////{ //// // Create run time view models ////} CreateMain(); } #endregion #region MainViewModel private static MainViewModel _main; /// <summary> /// Gets the Main property. /// </summary> public static MainViewModel MainStatic { get { if (_main == null) { CreateMain(); } return _main; } } /// <summary> /// Gets the Main property. /// </summary> [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Performance", "CA1822:MarkMembersAsStatic", Justification = "This non-static member is needed for data binding purposes.")] public MainViewModel Main { get { return MainStatic; } } /// <summary> /// Provides a deterministic way to delete the Main property. /// </summary> public static void ClearMain() { _main.Cleanup(); _main = null; } /// <summary> /// Provides a deterministic way to create the Main property. /// </summary> public static void CreateMain() { if (_main == null) { // allow Unity to resolve the view model and hold onto reference _main = Container.Resolve<MainViewModel>(); } } #endregion #region OrderViewModel // property to hold the order number (injected into OrderViewModel() constructor when resolved) public static string OrderToView { get; set; } /// <summary> /// Gets the OrderViewModel property. /// </summary> public static OrderViewModel OrderViewModelStatic { get { // allow Unity to resolve the view model // do not keep local reference to the instance resolved because we need a new instance // each time - the corresponding View is a UserControl that can be used multiple times // within a single window/view // pass current value of OrderToView parameter to constructor! return Container.Resolve<OrderViewModel>(new ParameterOverride("orderNumber", OrderToView)); } } /// <summary> /// Gets the OrderViewModel property. /// </summary> [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Performance", "CA1822:MarkMembersAsStatic", Justification = "This non-static member is needed for data binding purposes.")] public OrderViewModel Order { get { return OrderViewModelStatic; } } #endregion /// <summary> /// Cleans up all the resources. /// </summary> public static void Cleanup() { ClearMain(); Container = null; } } } And the MainViewModel class showing dependency injection usage: using GalaSoft.MvvmLight; using Microsoft.Practices.Unity; namespace MVVMLightUnityExample { public class MainViewModel : ViewModelBase { private IDialogService _dialogs; private ILoggerService _logger; /// <summary> /// Initializes a new instance of the MainViewModel class. This default constructor calls the /// non-default constructor resolving the interfaces used by this view model. /// </summary> public MainViewModel() : this(ViewModelLocator.Container.Resolve<IDialogService>(), ViewModelLocator.Container.Resolve<ILoggerService>()) { if (IsInDesignMode) { // Code runs in Blend --> create design time data. } else { // Code runs "for real" } } /// <summary> /// Initializes a new instance of the MainViewModel class. /// Interfaces are automatically resolved by the IoC container. /// </summary> /// <param name="dialogs">Interface to dialog service</param> /// <param name="logger">Interface to logger service</param> public MainViewModel(IDialogService dialogs, ILoggerService logger) { _dialogs = dialogs; _logger = logger; if (IsInDesignMode) { // Code runs in Blend --> create design time data. _dialogs.ShowMessage("Running in design-time mode!", "Injection Constructor", DialogButton.OK, DialogImage.Information); _logger.WriteLine("Running in design-time mode!"); } else { // Code runs "for real" _dialogs.ShowMessage("Running in run-time mode!", "Injection Constructor", DialogButton.OK, DialogImage.Information); _logger.WriteLine("Running in run-time mode!"); } } public override void Cleanup() { // Clean up if needed _dialogs = null; _logger = null; base.Cleanup(); } } } And the OrderViewModel class: using GalaSoft.MvvmLight; using Microsoft.Practices.Unity; namespace MVVMLightUnityExample { /// <summary> /// This class contains properties that a View can data bind to. /// <para> /// Use the <strong>mvvminpc</strong> snippet to add bindable properties to this ViewModel. /// </para> /// <para> /// You can also use Blend to data bind with the tool's support. /// </para> /// <para> /// See http://www.galasoft.ch/mvvm/getstarted /// </para> /// </summary> public class OrderViewModel : ViewModelBase { private const string testOrderNumber = "123456"; private Order _order; /// <summary> /// Initializes a new instance of the OrderViewModel class. /// </summary> public OrderViewModel() : this(testOrderNumber) { } /// <summary> /// Initializes a new instance of the OrderViewModel class. /// </summary> public OrderViewModel(string orderNumber) { if (IsInDesignMode) { // Code runs in Blend --> create design time data. _order = new Order(orderNumber, "My Company", "Our Address"); } else { _order = GetOrder(orderNumber); } } public override void Cleanup() { // Clean own resources if needed _order = null; base.Cleanup(); } } } And the code that could be used to display an order view for a specific order: public void ShowOrder(string orderNumber) { // pass the order number to show to ViewModelLocator to be injected //into the constructor of the OrderViewModel instance ViewModelLocator.OrderToShow = orderNumber; View.OrderView orderView = new View.OrderView(); } These examples have been stripped down to show only the IoC ideas. It took a lot of trial and error, searching the internet for examples, and finding out that the Unity 2.0 documentation is lacking (at best) to come up with this solution. Let me know if you think it could be improved.

Read the article

Spring security - Reach users ID without passing it through every controller

- by nilsi

I have a design issue that I don't know how to solve. I'm using Spring 3.2.4 and Spring security 3.1.4. I have a Account table in my database that looks like this: create table Account (id identity, username varchar unique, password varchar not null, firstName varchar not null, lastName varchar not null, university varchar not null, primary key (id)); Until recently my username was just only a username but I changed it to be the email address instead since many users want to login with that instead. I have a header that I include on all my pages which got a link to the users profile like this: <a href="/project/users/<%= request.getUserPrincipal().getName()%>" class="navbar-link"><strong><%= request.getUserPrincipal().getName()%></strong></a> The problem is that <%= request.getUserPrincipal().getName()%> returns the email now, I don't want to link the user's with thier emails. Instead I want to use the id every user have to link to the profile. How do I reach the users id's from every page? I have been thinking of two solutions but I'm not sure: Change the principal to contain the id as well, don't know how to do this and having problem finding good information on the topic. Add a model attribute to all my controllers that contain the whole user but this would be really ugly, like this. Account account = entityManager.find(Account.class, email); model.addAttribute("account", account); There are more way's as well and I have no clue which one is to prefer. I hope it's clear enough and thank you for any help on this. ====== Edit according to answer ======= I edited Account to implement UserDetails, it now looks like this (will fix the auto generated stuff later): @Entity @Table(name="Account") public class Account implements UserDetails { @Id private int id; private String username; private String password; private String firstName; private String lastName; @ManyToOne private University university; public Account() { } public Account(String username, String password, String firstName, String lastName, University university) { this.username = username; this.password = password; this.firstName = firstName; this.lastName = lastName; this.university = university; } public String getUsername() { return username; } public String getPassword() { return password; } public String getFirstName() { return firstName; } public String getLastName() { return lastName; } public void setUsername(String username) { this.username = username; } public void setPassword(String password) { this.password = password; } public void setFirstName(String firstName) { this.firstName = firstName; } public void setLastName(String lastName) { this.lastName = lastName; } public University getUniversity() { return university; } public void setUniversity(University university) { this.university = university; } public int getId() { return id; } public void setId(int id) { this.id = id; } @Override public Collection<? extends GrantedAuthority> getAuthorities() { // TODO Auto-generated method stub return null; } @Override public boolean isAccountNonExpired() { // TODO Auto-generated method stub return false; } @Override public boolean isAccountNonLocked() { // TODO Auto-generated method stub return false; } @Override public boolean isCredentialsNonExpired() { // TODO Auto-generated method stub return false; } @Override public boolean isEnabled() { // TODO Auto-generated method stub return true; } } I also added <%@ taglib prefix="sec" uri="http://www.springframework.org/security/tags" %> To my jsp files and trying to reach the id by <sec:authentication property="principal.id" /> This gives me the following org.springframework.beans.NotReadablePropertyException: Invalid property 'principal.id' of bean class [org.springframework.security.authentication.UsernamePasswordAuthenticationToken]: Bean property 'principal.id' is not readable or has an invalid getter method: Does the return type of the getter match the parameter type of the setter? ====== Edit 2 according to answer ======= I based my application on spring social samples and I never had to change anything until now. This are the files I think are relevant, please tell me if theres something you need to see besides this. AccountRepository.java public interface AccountRepository { void createAccount(Account account) throws UsernameAlreadyInUseException; Account findAccountByUsername(String username); } JdbcAccountRepository.java @Repository public class JdbcAccountRepository implements AccountRepository { private final JdbcTemplate jdbcTemplate; private final PasswordEncoder passwordEncoder; @Inject public JdbcAccountRepository(JdbcTemplate jdbcTemplate, PasswordEncoder passwordEncoder) { this.jdbcTemplate = jdbcTemplate; this.passwordEncoder = passwordEncoder; } @Transactional public void createAccount(Account user) throws UsernameAlreadyInUseException { try { jdbcTemplate.update( "insert into Account (firstName, lastName, username, university, password) values (?, ?, ?, ?, ?)", user.getFirstName(), user.getLastName(), user.getUsername(), user.getUniversity(), passwordEncoder.encode(user.getPassword())); } catch (DuplicateKeyException e) { throw new UsernameAlreadyInUseException(user.getUsername()); } } public Account findAccountByUsername(String username) { return jdbcTemplate.queryForObject("select username, firstName, lastName, university from Account where username = ?", new RowMapper<Account>() { public Account mapRow(ResultSet rs, int rowNum) throws SQLException { return new Account(rs.getString("username"), null, rs.getString("firstName"), rs.getString("lastName"), new University("test")); } }, username); } } security.xml <?xml version="1.0" encoding="UTF-8"?> <beans:beans xmlns="http://www.springframework.org/schema/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:beans="http://www.springframework.org/schema/beans" xsi:schemaLocation="http://www.springframework.org/schema/security http://www.springframework.org/schema/security/spring-security-3.1.xsd http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.1.xsd"> <http pattern="/resources/**" security="none" /> <http pattern="/project/" security="none" /> <http use-expressions="true">  <form-login login-page="/signin" login-processing-url="/signin/authenticate" authentication-failure-url="/signin?error=bad_credentials" /> <logout logout-url="/signout" delete-cookies="JSESSIONID" /> <intercept-url pattern="/addcourse" access="isAuthenticated()" /> <intercept-url pattern="/courses/**/**/edit" access="isAuthenticated()" /> <intercept-url pattern="/users/**/edit" access="isAuthenticated()" /> </http> <authentication-manager alias="authenticationManager"> <authentication-provider> <password-encoder ref="passwordEncoder" /> <jdbc-user-service data-source-ref="dataSource" users-by-username-query="select username, password, true from Account where username = ?" authorities-by-username-query="select username, 'ROLE_USER' from Account where username = ?"/> </authentication-provider> <authentication-provider> <user-service> <user name="admin" password="admin" authorities="ROLE_USER, ROLE_ADMIN" /> </user-service> </authentication-provider> </authentication-manager> </beans:beans> And this is my try of implementing a UserDetailsService public class RepositoryUserDetailsService implements UserDetailsService { private final AccountRepository accountRepository; @Autowired public RepositoryUserDetailsService(AccountRepository repository) { this.accountRepository = repository; } @Override public UserDetails loadUserByUsername(String username) throws UsernameNotFoundException { Account user = accountRepository.findAccountByUsername(username); if (user == null) { throw new UsernameNotFoundException("No user found with username: " + username); } return user; } } Still gives me the same error, do I need to add the UserDetailsService somewhere? This is starting to be something else compared to my initial question, I should maybe start another question. Sorry for my lack of experience in this. I have to read up.

Read the article

Form contents not showing in email

- by fmz

This is a followup to a question I posted yesterday. I thought everything was working fine, but today, I am not getting any results in the email from the drop down field. Here is the form code in question: <label for="purpose"><span class="required">*</span> Purpose</label> <select id="purpose" name="purpose" style="width: 300px; height:35px;"> <option value="" selected="selected">-- Select One --</option> <option value="I am interested in your services">I am interested in your services!</option> <option value="I am interested in a partnership">I am interested in a partnership!</option> <option value="I am interested in a job">I am interested in a job!</option> </select> It is then processed in PHP and should output the selected option to an email, however the Reason for Contact line always comes through with nothing in it. Here is the PHP code: <?php if(!$_POST) exit; $name = $_POST['name']; $company = $_POST['company']; $email = $_POST['email']; $phone = $_POST['phone']; $purpose = $_POST['purpose']; $comments = $_POST['comments']; $verify = $_POST['verify']; if(trim($name) == '') { echo '<div class="error_message">Attention! You must enter your name.</div>'; exit(); } else if(trim($email) == '') { echo '<div class="error_message">Attention! Please enter a valid email address.</div>'; exit(); } else if(trim($phone) == '') { echo '<div class="error_message">Attention! Please enter a valid phone number.</div>'; exit(); } else if(!isEmail($email)) { echo '<div class="error_message">Attention! You have enter an invalid e-mail address, try again.</div>'; exit(); } if(trim($comments) == '') { echo '<div class="error_message">Attention! Please enter your message.</div>'; exit(); } else if(trim($verify) == '') { echo '<div class="error_message">Attention! Please enter the verification number.</div>'; exit(); } else if(trim($verify) != '4') { echo '<div class="error_message">Attention! The verification number you entered is incorrect.</div>'; exit(); } if($error == '') { if(get_magic_quotes_gpc()) { $comments = stripslashes($comments); } // Configuration option. // Enter the email address that you want to emails to be sent to. // Example $address = "[email protected]"; $address = "[email protected]"; // Configuration option. // i.e. The standard subject will appear as, "You've been contacted by John Doe." // Example, $e_subject = '$name . ' has contacted you via Your Website.'; $e_subject = 'You\'ve been contacted by ' . $name . '.'; // Configuration option. // You can change this if you feel that you need to. // Developers, you may wish to add more fields to the form, in which case you must be sure to add them here. $e_body = "You have been contacted by $name.\r\n\n"; $e_company = "Company: $company\r\n\n"; $e_content = "Comments: \"$comments\"\r\n\n"; $e_purpose = "Reason for contact: $purpose\r\n\n"; $e_reply = "You can contact $name via email, $email or via phone $phone"; $msg = $e_body . $e_content . $e_company . $e_purpose . $e_reply; if(mail($address, $e_subject, $msg, "From: $email\r\nReply-To: $email\r\nReturn-Path: $email\r\n")) { // Email has sent successfully, echo a success page. echo "<fieldset>"; echo "<div id='success_page'>"; echo "<h1>Email Sent Successfully.</h1>"; echo "<p>Thank you <strong>$name</strong>, your message has been submitted to us.</p>"; echo "</div>"; echo "</fieldset>"; } else { echo 'ERROR!'; } } function isEmail($email) { // Email address verification, do not edit. return(preg_match("/^[-_.[:alnum:]]+@((([[:alnum:]]|[[:alnum:]][[:alnum:]-]*[[:alnum:]])\.)+(ad|ae|aero|af|ag|ai|al|am|an|ao|aq|ar|arpa|as|at|au|aw|az|ba|bb|bd|be|bf|bg|bh|bi|biz|bj|bm|bn|bo|br|bs|bt|bv|bw|by|bz|ca|cc|cd|cf|cg|ch|ci|ck|cl|cm|cn|co|com|coop|cr|cs|cu|cv|cx|cy|cz|de|dj|dk|dm|do|dz|ec|edu|ee|eg|eh|er|es|et|eu|fi|fj|fk|fm|fo|fr|ga|gb|gd|ge|gf|gh|gi|gl|gm|gn|gov|gp|gq|gr|gs|gt|gu|gw|gy|hk|hm|hn|hr|ht|hu|id|ie|il|in|info|int|io|iq|ir|is|it|jm|jo|jp|ke|kg|kh|ki|km|kn|kp|kr|kw|ky|kz|la|lb|lc|li|lk|lr|ls|lt|lu|lv|ly|ma|mc|md|mg|mh|mil|mk|ml|mm|mn|mo|mp|mq|mr|ms|mt|mu|museum|mv|mw|mx|my|mz|na|name|nc|ne|net|nf|ng|ni|nl|no|np|nr|nt|nu|nz|om|org|pa|pe|pf|pg|ph|pk|pl|pm|pn|pr|pro|ps|pt|pw|py|qa|re|ro|ru|rw|sa|sb|sc|sd|se|sg|sh|si|sj|sk|sl|sm|sn|so|sr|st|su|sv|sy|sz|tc|td|tf|tg|th|tj|tk|tm|tn|to|tp|tr|tt|tv|tw|tz|ua|ug|uk|um|us|uy|uz|va|vc|ve|vg|vi|vn|vu|wf|ws|ye|yt|yu|za|zm|zw)$|(([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5])\.){3}([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5]))$/i",$email)); } ?> Any assistance would be greatly appreciated. Thanks!

Read the article

Contact Form ASP.net

- by kwek-kwek

This is my first time creating a from in ASP.NET I am following a tutorial here It is easy to follow but I get this error. But, if I take out this code : <%@ Page Language="C#" AutoEventWireup="true" CodeFile="contact-form.aspx.cs" Inherits="_Emailer" %> it works like a charm. What am I doing wrong? Here is my code full HTML: <%@ Page Language="C#" AutoEventWireup="true" CodeFile="contact-form.aspx.cs" Inherits="_Emailer" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1 " /> <title>École Marc Favreau</title> <link href="style.css" rel="stylesheet" type="text/css" /> </head> <body id="benevolat"> <asp:label id="lblOutcome" runat="server" /> <form action="" method="post" enctype="multipart/form-data" name="form1" id="form1"> <table width="100%" border="0" cellspacing="5" cellpadding="0"> <tr> <td>Nom du Parent</td> <td><label> <input type="text" name="c_Name" id="c_Name" /> </label></td> </tr> <tr> <td>Nom de votre enfant</td> <td><input type="text" name="c_Enfant" id="c_Enfant" /></td> </tr> <tr> <td>Groupe</td> <td><input type="text" name="c_Groupe" id="c_Groupe" /></td> </tr> <tr> <td>Numéro de téléphone</td> <td><input type="text" name="c_Tel" id="c_Tel" /></td> </tr> <tr> <td> </td> <td> </td> </tr> <tr> <td colspan="2"><strong>J'aimerais être bénévole pour:</strong></td> </tr> <tr> <td colspan="2"><table width="100%" border="0" cellspacing="5" cellpadding="0"> <tr> <td width="5%"><label> <input type="checkbox" name="La bibliothèque " id="La bibliothèque " /> </label></td> <td colspan="2">La bibliothèque </td> </tr> <tr> <td><input type="checkbox" name="Aide en classe " id="Aide en classe " /></td> <td colspan="2">Aide en classe </td> </tr> <tr> <td><input type="checkbox" name="Aide pour les dîners pizza " id="Aide pour les dîners pizza " /></td> <td colspan="2">Aide pour les dîners pizza  </td> </tr> <tr> <td><input type="checkbox" name="Aide aux devoirs après l’école" id="Aide aux devoirs après l’école" /></td> <td colspan="2">Aide aux devoirs après l’école </td> </tr> <tr> <td><input type="checkbox" name="Aménagement paysager (fleurs, arbustes à tailler…)" id="Aménagement paysager (fleurs, arbustes à tailler…)" /></td> <td colspan="2">Aménagement paysager (fleurs, arbustes à tailler…) </td> </tr> <tr> <td><input type="checkbox" name="Photo scolaire" id="Photo scolaire" /></td> <td colspan="2">Photo scolaire </td> </tr> <tr> <td><input type="checkbox" name="Accompagner les élèves lors des sorties" id="Accompagner les élèves lors des sorties" /></td> <td colspan="2">Accompagner les élèves lors des sorties </td> </tr> <tr> <td><input type="checkbox" name="Venir parler de votre métier dans une classe ou monter un atelier" id="Venir parler de votre métier dans une classe ou monter un atelier" /></td> <td colspan="2">Venir parler de votre métier dans une classe ou monter un atelier </td> </tr> <tr> <td><input type="checkbox" name="Autres" id="Autres" /></td> <td>Autres</td> <td><label> <input type="text" name="c_Autre" id="c_Autre" /> </label></td> </tr> </table></td> </tr> <tr> <td colspan="2"><label> <input type="submit" name="button" id="button" value="Soumettre" /> <input type="submit" name="button2" id="button2" value="Effacer" /> </label></td> </tr> </table> </form> </div> </div> </div>  </div> </body> </html>

Read the article

Why won't Javascript assembled Iframe load in IE6 over HTTPS although it will over HTTP?

- by Lauren

The issue: The iframe won't load inside the tags on the review and submit page here: https://checkout.netsuite.com/s.nl/c.659197/sc.4/category.confirm/.f Login:[email protected] pass:test03 To produce problem: - Where it says "Your Third Party Shipper Numbers (To enter one, click here.)", click "here" to see the form that won't load in IE6. It seems to load in every other modern browser. The same form works fine on this page (you have to click on the "order sample" button to see the link to the same form): http://www.avaline.com/R3000_3 Here's the HTML: <div style="border-color: rgb(255, 221, 221);" id="itmSampl"> <div id="placeshipnum" style="display: none;"></div> <div id="sampAdd"> <strong>Your Third Party Shipper Numbers</strong> (To enter one, click <a rel="nofollow" href="javascript:;" onclick="enterShipNum()">here</a>.) <ul style="list-style: none outside none; padding-left: 20px;"> <li><span class="bold">UPS #</span>: 333333</li> <li><span class="bold">FedEx #</span>: 777888999</li> </ul> </div> </div> Upon clicking the "to enter one, click here" link this is the iframe HTML in all browsers except IE6 (in IE6, the "shipnum" div element is assembled, but that's it): <div id="placeshipnum" style="display: block;"> <div id="shipnum" style="background: none repeat scroll 0% 0% rgb(255, 255, 255);"> <div class="wrapper-x"> <a title="close window" class="linkfooter" href="javascript:;" onclick="enterShipNum()"> <img height="11" width="11" alt="close window" src="/c.659197/site/av-template/x-image-browser.gif"> </a> </div> <iframe scrolling="no" height="240" frameborder="0" width="190" src="https://forms.netsuite.com/app/site/crm/externalleadpage.nl?compid=659197&formid=56&h=9b260d2f9bca0fd9c300&[email protected]&firstname=Test&lastname=Account&ck=Q1BnzaRXAe_RfjhE&vid=Q1BnzaRXAd3Rfik7&cktime=87919&cart=5257&promocode=SAMPLE&chrole=1014&cjsid=0a0102621f435ef0d0d4b3cd49ab8b2db4e253c671eb" allowtransparency="true" border="0" onload="hideShipLoadImg()" style="display: block;"></iframe></div></div> This is the relevant Javascript: // Allow for shipper number update var shipNumDisplay=0; function enterShipNum() { if (shipNumDisplay == 0){ //odrSampl(); document.getElementById('placeshipnum').style.display="block"; document.getElementById('placeshipnum').innerHTML='<div id="shipnum"><div class="wrapper-x"> <a onclick="enterShipNum()" href="javascript:;" class="linkfooter" title="close window"> <img height="11" width="11" src="/c.659197/site/av-template/x-image-browser.gif" alt="close window" /> </a> </div><iframe onload="hideShipLoadImg()" scrolling="no" height="240" frameborder="0" width="190" border="0" allowtransparency="true" src="https://forms.netsuite.com/app/site/crm/externalleadpage.nl?compid=659197&formid=56&h=9b260d2f9bca0fd9c300&[email protected]&firstname=Test&lastname=Account&ck=Q1BnzaRXAe_RfjhE&vid=Q1BnzaRXAd3Rfik7&cktime=87919&cart=5257&promocode=SAMPLE&chrole=1014&cjsid=0a0102621f435ef0d0d4b3cd49ab8b2db4e253c671eb"></iframe></div>'; shipNumDisplay=1; } else { document.getElementById('placeshipnum').style.display="none"; document.getElementById('shipnum').parentNode.removeChild(document.getElementById('shipnum')); shipNumDisplay=0; } } function hideShipLoadImg(){ var shipiframe= document.getElementById('shipnum').getElementsByTagName('iframe')[0]; shipiframe.style.display = 'block'; shipiframe.parentNode.style.background = '#fff'; } This is most of the form inside the iframe although I don't think it's relevant: <form style="margin: 0pt;" onsubmit="return ( window.isinited && window.isvalid && save_record( true ) )" action="/app/site/crm/externalleadpage.nl" enctype="multipart/form-data" method="POST" name="main_form" id="main_form"> <div class="field name"> <label for="firstname">First Name <span class="required">*</span></label> <span class="input" id="firstname_fs"><span class="input" id="firstname_val">Test</span></span><input type="hidden" id="firstname" name="firstname" value="Test" onchange="nlapiFieldChanged(null,'firstname');"> </div> <div class="field name"> <label for="lastname">Last Name <span class="required">*</span></label> <span class="input" id="lastname_fs"><span class="input" id="lastname_val">Account</span></span><input type="hidden" id="lastname" name="lastname" value="Account" onchange="nlapiFieldChanged(null,'lastname');"> </div> <div id="ups" class="field"> <label for="custentity4">UPS # </label> <span id="custentity4_fs" style="white-space: nowrap;"><input type="text" id="custentity4" onblur="if (this.checkvalid == true) {this.isvalid=(validate_field(this,'text',false,false) && nlapiValidateField(null,'custentity4'));} if (this.isvalid == false) { selectAndFocusField(this); return this.isvalid;}" name="custentity4" size="25" onfocus="if (this.isvalid == true || this.isvalid == false) this.checkvalid=true;" onchange="setWindowChanged(window, true);this.isvalid=(validate_field(this,'text',true,false) && nlapiValidateField(null,'custentity4'));this.checkvalid=false;if (this.isvalid) {nlapiFieldChanged(null,'custentity4');;}if (this.isvalid) this.isvalid=validate_textfield_maxlen(this,6,true,true);if (!this.isvalid) { selectAndFocusField(this);}return this.isvalid;" class="input" maxlength="6"></span> </div> <div id="fedex" class="field"> <label for="custentity9">FedEx # </label> <span id="custentity9_fs" style="white-space: nowrap;"><input type="text" id="custentity9" onblur="if (this.checkvalid == true) {this.isvalid=(validate_field(this,'text',false,false) && nlapiValidateField(null,'custentity9'));} if (this.isvalid == false) { selectAndFocusField(this); return this.isvalid;}" name="custentity9" size="25" onfocus="if (this.isvalid == true || this.isvalid == false) this.checkvalid=true;" onchange="setWindowChanged(window, true);this.isvalid=(validate_field(this,'text',true,false) && nlapiValidateField(null,'custentity9'));this.checkvalid=false;if (this.isvalid) {nlapiFieldChanged(null,'custentity9');;}if (this.isvalid) this.isvalid=validate_textfield_maxlen(this,9,true,true);if (!this.isvalid) { selectAndFocusField(this);}return this.isvalid;" class="input" maxlength="9"></span> </div> <div class="field hidden"><input type="hidden" id="email" name="email" value="[email protected]"></div> <div class="field"><label class="submit" for="submitbutton"><span class="required">*</span> Indicates required fields.</label></div> <input type="submit" id="submitbutton" value="submit">  <input type="hidden" value="659197" name="compid"><input type="hidden" value="56" name="formid"><input type="hidden" value="" name="id"><input type="hidden" value="9b260d2f9bca0fd9c300" name="h"><input type="hidden" value="-1" name="rectype"><input type="hidden" value="" name="nlapiPI"><input type="hidden" value="" name="nlapiSR"><input type="hidden" value="ShipValidateField" name="nlapiVF"><input type="hidden" value="" name="nlapiFC"><input type="hidden" value="/app/site/crm/externalleadpage.nl?compid=659197&formid=56&h=9b260d2f9bca0fd9c300&[email protected]&firstname=Test&lastname=Account&ck=Q1BnzaRXAe_RfjhE&vid=Q1BnzaRXAd3Rfik7&cktime=87919&cart=5257&promocode=SAMPLE&chrole=1014&cjsid=0a0102621f435ef0d0d4b3cd49ab8b2db4e253c671eb" name="whence"><input type="hidden" name="submitted"> <iframe height="0" style="visibility: hidden;" name="server_commands" id="server_commands" src="javascript:false"></iframe>  </form>

Read the article

Contact Form + jQuery validationengine

- by BigMad

I created this contact form, inserting jQuery fadeLabel and validationEngine to beautify the form the file index.php / .html (I have not yet figured out which of the two versions put it) scripts are index: <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js"></script> <script src="/js/backtop.js"></script> <script src="/js/fadeLabel.js"></script> <script> $(document).ready(function () { $('form .fadeLabel').fadeLabel(); }); </script> <script src="/js/validationEngine-it.js"></script> <script src="/js/validationEngine.js"></script> <script> $(document).ready(function(){ $("#form_box").validationEngine({ ajaxSubmit: true, ajaxSubmitFile: "contact.php", ajaxSubmitMessage: "Thank you, We will contact you soon !", success : false, failure : function() {} }) }); </script> <script src="/js/contactform.js"></script> however this is the part of the form's code <p id="form_success" class="success hide"><strong>Grazie!</strong> Il tuo messaggio è stato inviato con successo.</p> <form id="form_box"> <fieldset> <p><label for="name">Nome*</label><input type="text" id="name" name="name" class="validate[required] fadeLabel" value=""/></p> <p><label for="email">E-mail*</label><input type="email" id="email" name="email" class="validate[required,custom[email]] fadeLabel" value=""/></p> <p><label for="website">Sito web</label><input type="url" id="website" name="website" class="fadeLabel" value=""/></p> <p><label for="message">Messaggio*</label><textarea id="message" name="message" class="validate[required] fadeLabel" cols="30" rows="10" value=""></textarea></p> </fieldset> <p id="form_submit" class="submit"><button class="send">Invia</button> *Campi obbligatori</p> <p id="form_send" class="send hide">Invio in corso…</p> <p id="form_error" class="submit error hide"><button class="send">Invia</button> Si prega di correggere l'errore e re-inviarlo.</p> </form> This is the contact.php where it receives the data and sends 2 emails (one for me with the data and a thank you to those who contacted me) contact.php: <?php //include variables $my_email = "[email protected]"; $my_site = "adrianogenovese.com"; session_start(); $name = $_POST['name']; $email = $_POST['email']; $website = $_POST['website']; $message = $_POST['message']; $ip = $_SERVER['REMOTE_ADDR']; //beginning to email me $to = $my_email; $sbj = "Richiesta Informazioni - $my_site"; $msg = " <html> ... //the body of the email to me ... </html> "; $from = $email; $headers = 'MIME-Version: 1.0' . "\n"; $headers .= 'Content-type: text/html; charset=iso-8859-1' . "\n"; $headers .= "From: $from"; mail($to,$sbj,$msg,$headers); //email sent to me //beginning of the email recipient $toClient = $email; $msgClient = " <html> ... //the body of the email recipient ... </html> "; $fromClient = $my_email; $sbjClient = "Grazie $name per aver contattato $my_site "; $headersClient = 'MIME-Version: 1.0' . "\r\n"; $headersClient .= 'Content-type: text/html; charset=iso-8859-1' . "\r\n"; $headersClient .= "From: $fromClient"; mail($toClient,$sbjClient,$msgClient,$headersClient); //mail inviata al cliente //order confirmation email //Reset error session_destroy(); exit; ?> this is the contact form jscript contactform.js: $(document).ready(function() { $(".send").click(function(){ $("#form_send").removeClass('hide'); $("#form_submit").addClass('hide'); $("#form_error").addClass('hide'); var name = $("#name").val(); var email = $("#email").val(); var website = $("#website").val(); var message = $("#message").val(); if (name == "" || email == "" ) { $("#form_send").addClass('hide'); $("#form_error").removeClass('hide'); } else { $.ajax({ type: "POST", url: "contatti/contact.php", data: "name=" + name + "&email=" + email + "&message=" + message + "&website=" + website, dataType: "html", success: function(msg) { $("#form_send").addClass('hide').delay(3000).fadeOut(3000); $("#form_success").removeClass('hide'); $("#form_box").addClass('hide').slideUp(2000).fadeOut(); }, error: function() { alert("An unexpected error occurred..."); } }); } }); //end form });//end Dom The jQuery seem to work very well, I wanted to make sure that the page is not of the form updated or go to another page (the only thing that works for now) compensation reflected in the following problems: I always leave the alert of contactform.js Does not send any mail, it to me to recipient I can not do the work properly. delay () .fadeOut / fadeIn and. SlideUp (). FadeOut () so that the sending of this email appears for 3 seconds "$ (" # form_send "). addClass ('hide')" before you do anything else then the form disappears up using some second type slideUp "$ (" # form_box "). addClass ('hide')" by displaying just the "$ (" # form_success "). removeClass ('hide')" in the address bar also appears the form data (e.g. ../index.php?name=test&email=example%40mail.com&website=&message=helloworld)

Read the article

urgent help needed to convert arabic html to pdf

- by Mariam

<div> <table border="1" width="500px"> <tr> <td colspan="2"> aspdotnetcodebook ????? ???????</td> </tr> <tr> <td> cell1 </td> <td> cell2 </td> </tr> <tr> <td colspan="2"> <asp:Label ID="lblLabel" runat="server" Text=""></asp:Label> <img alt="" src="logo.gif" style="width: 174px; height: 40px" /></td> </tr> <tr> <td colspan="2" dir="rtl"> <h1> <img alt="" height="168" src="http://a.cksource.com/c/1/inc/img/demo-little-red.jpg" style="margin-left: 10px; margin-right: 10px; float: left;" width="120" />????? ????? ??? ??? ?? ?? ??</h1> <p> "<b>Little Red Riding Hood</b>" is a famous <a href="http://en.wikipedia.org/wiki/Fairy_tale" title="Fairy tale">fairy tale</a> about a young girl's encounter with a wolf. The story has been changed considerably in its history and subject to numerous modern adaptations and readings.</p> <table align="right" border="1" cellpadding="1" cellspacing="1" style="width: 200px;"> <caption> <strong>International Names</strong></caption> <tr> <td> ????? ???????</td> <td>  </td> </tr> <tr> <td> Italian</td> <td> <i>Cappuccetto Rosso</i></td> </tr> <tr> <td> Spanish</td> <td> <i>Caperucita Roja</i></td> </tr> </table> <p> The version most widely known today is based on the <a href="http://en.wikipedia.org/wiki/Brothers_Grimm" title="Brothers Grimm"> Brothers Grimm</a> variant. It is about a girl called Little Red Riding Hood, after the red <a href="http://en.wikipedia.org/wiki/Hood_(headgear%2529" title="Hood (headgear)">hooded</a> <a href="http://en.wikipedia.org/wiki/Cape" title="Cape">cape</a> or <a href="http://en.wikipedia.org/wiki/Cloak" title="Cloak">cloak</a> she wears. The girl walks through the woods to deliver food to her sick grandmother.</p> <p> A wolf wants to eat the girl but is afraid to do so in public. He approaches the girl, and she naïvely tells him where she is going. He suggests the girl pick some flowers, which she does. In the meantime, he goes to the grandmother's house and gains entry by pretending to be the girl. He swallows the grandmother whole, and waits for the girl, disguised as the grandmother.</p> <p> When the girl arrives, she notices he looks very strange to be her grandma. In most retellings, this eventually culminates with Little Red Riding Hood saying, "My, what big teeth you have!"<br /> To which the wolf replies, "The better to eat you with," and swallows her whole, too.</p> <p> A <a href="http://en.wikipedia.org/wiki/Hunter" title="Hunter">hunter</a>, however, comes to the rescue and cuts the wolf open. Little Red Riding Hood and her grandmother emerge unharmed. They fill the wolf's body with heavy stones, which drown him when he falls into a well. Other versions of the story have had the grandmother shut in the closet instead of eaten, and some have Little Red Riding Hood saved by the hunter as the wolf advances on her rather than after she is eaten.</p> <p> The tale makes the clearest contrast between the safe world of the village and the dangers of the <a href="http://en.wikipedia.org/wiki/Enchanted_forest" title="Enchanted forest">forest</a>, conventional antitheses that are essentially medieval, though no written versions are as old as that.</p> </td> </tr> </table> </div> i use itextsharp to convert this content which is stored in DB to pdf file to be downloaded to the user i cant achieve this

Read the article

Why am I getting null object reference error when saving (OnItemUpdating event) the first edit item

- by craigmoliver

I'm getting the error "Object reference not set to an instance of an object." when trying to reference a HiddenField (lvEditProjectSteps_hdnStepStatusId for future reference) from the EditItem during the OnItemUpdating event after the Update event fires in a ListView. This only occurs on the FIRST item in the ListView. I checked the source and the HTML is being rendered properly. ANY insight is appreciated! Thanks in advance... Source error: var lvEditProjectSteps_hdnStepStatusId = (HiddenField) lvEditProjectSteps.EditItem.FindControl("lvEditProjectSteps_hdnStepStatusId"); Here's the aspx side of the ListView: <asp:ListView ID="lvEditProjectSteps" runat="server" OnItemDataBound="lvEditProjectSteps_OnItemDataBound" OnItemUpdating="lvEditProjectSteps_OnItemUpdating" DataSourceID="odsEditProjectStep" DataKeyNames="Id"> <LayoutTemplate> <table class="standard-box-style" style="width:800px"> <thead> <tr> <th> </th> <th> </th> <th>Created</th> <th>Updated</th> </tr> </thead> <tbody> <asp:PlaceHolder ID="itemPlaceHolder" runat="server" /> </tbody> </table> </LayoutTemplate> <ItemTemplate> <tr> <td style="width:50px"<%# (Container.DisplayIndex % 2 == 0)?"":" class=\"row-alternating\"" %>> <asp:ImageButton ID="lvEditProjectSteps_btnEdit" runat="server" ImageUrl="~/admin/images/icons/edit.gif" AlternateText="Edit" SkinID="interfaceButton" CommandName="Edit" /> <asp:HiddenField ID="lvEditProjectSteps_hdnId" runat="server" Value='<%# Bind("Id")%>' /> <asp:HiddenField ID="lvEditProjectSteps_hdnStepStatusId" runat="server" Value='<%# Bind("StepStatusId")%>' /> <asp:HiddenField ID="lvEditProjectSteps_hdnStepStatusStepId" runat="server" Value='<%# Bind("StepStatus_StepId")%>' /> </td> <td style="width:30px"<%# (Container.DisplayIndex % 2 == 0)?"":" class=\"row-alternating\"" %>><asp:Image ID="imgStatus" runat="server" /></td> <td style="width:75px"<%# (Container.DisplayIndex % 2 == 0)?"":" class=\"row-alternating\"" %>><asp:Literal ID="litTsCreated" runat="server" /></td> <td style="width:75px"<%# (Container.DisplayIndex % 2 == 0)?"":" class=\"row-alternating\"" %>><asp:Literal ID="litTsUpdated" runat="server" /></td> </tr> </ItemTemplate> <EditItemTemplate> <tr> <td style="width:50px"<%# (Container.DisplayIndex % 2 == 0)?"":" class=\"row-alternating\"" %>> <asp:ImageButton ID="lvEditProjectSteps_btnUpdate" runat="server" ImageUrl="~/admin/images/icons/save.png" AlternateText="Save" SkinID="interfaceButton" CommandName="Update" ValidationGroup="EditProjectStepsSave" /> <asp:ImageButton ID="lvEditProjectSteps_btnCancel" runat="server" ImageUrl="~/admin/images/icons/cancel.png" AlternateText="Cancel" SkinID="interfaceButton" CommandName="Cancel" /> <asp:HiddenField ID="lvEditProjectSteps_hdnId" runat="server" Value='<%# Bind("Id")%>' /> <asp:HiddenField ID="lvEditProjectSteps_hdnStepStatusId" runat="server" Value='<%# Bind("StepStatusId")%>' /> <asp:HiddenField ID="lvEditProjectSteps_hdnStepStatusStepId" runat="server" Value='<%# Bind("StepStatus_StepId")%>' /> </td> <td style="width:180px" colspan="3"<%# (Container.DisplayIndex % 2 == 0)?"":" class=\"row-alternating\"" %>> <div><strong>Status</strong></div> <div class="radiobuttonlist-status"> <asp:RadioButtonList ID="lvEditProjectSteps_rblStatus" runat="server" RepeatDirection="Horizontal" AutoPostBack="true" OnSelectedIndexChanged="lvEditProjectSteps_rblStatus_OnSelectedIndexChanged"> <asp:ListItem Value="1"><img src="/images/icon/project-status/1.png" alt="Error" /></asp:ListItem> <asp:ListItem Value="2"><img src="/images/icon/project-status/2.png" alt="In Progress" /></asp:ListItem> <asp:ListItem Value="3"><img src="/images/icon/project-status/3.png" alt="Complete" /></asp:ListItem> </asp:RadioButtonList> <asp:RequiredFieldValidator ID="valRequired_lvEditProjectSteps_rblStatus" runat="server" ControlToValidate="lvEditProjectSteps_rblStatus" SetFocusOnError="true" Display="Dynamic" ErrorMessage="<br />^ required ^" ValidationGroup="EditProjectStepsSave" /> </div> </td> </tr> </EditItemTemplate> </asp:ListView> And the code-behind: protected void lvEditProjectSteps_OnItemDataBound(object sender, ListViewItemEventArgs e) { if (e.Item.ItemType == ListViewItemType.DataItem) { var info = (ProjectStepInfo)DataBinder.GetDataItem(e.Item); // View Item var litTsCreated = (Literal)e.Item.FindControl("litTsCreated"); var litTsUpdated = (Literal)e.Item.FindControl("litTsUpdated"); var imgStatus = (Image) e.Item.FindControl("imgStatus"); if (litTsCreated != null) litTsCreated.Text = String.Format("{0:d}", info.TsCreated); if (litTsUpdated != null) litTsUpdated.Text = String.Format("{0:d}", info.TsCreated); if (imgStatus != null) imgStatus.ImageUrl = String.Format("/images/icon/project-status/{0}.png", info.StepStatus_StatusId); // Edit Item var lvEditProjectSteps_rblStatus = (RadioButtonList) e.Item.FindControl("lvEditProjectSteps_rblStatus"); if (lvEditProjectSteps_rblStatus != null) lvEditProjectSteps_rblStatus.SelectedValue = info.StepStatus_StatusId.ToString(); } } protected void lvEditProjectSteps_OnItemUpdating(object sender, ListViewUpdateEventArgs e) { if (IsValid) { var oController = new Controller(); var lvEditProjectSteps_hdnStepStatusId = (HiddenField) lvEditProjectSteps.EditItem.FindControl("lvEditProjectSteps_hdnStepStatusId"); var lvEditProjectSteps_hdnStepStatusStepId = (HiddenField) lvEditProjectSteps.EditItem.FindControl("lvEditProjectSteps_hdnStepStatusStepId"); var lvEditProjectSteps_rblStatus = (RadioButtonList) lvEditProjectSteps.EditItem.FindControl("lvEditProjectSteps_rblStatus"); var infoStepStatus = oController.StepStatus_SelectOne_StepId_StatusId(Convert.ToInt32(lvEditProjectSteps_hdnStepStatusStepId.Value), Convert.ToInt32(lvEditProjectSteps_rblStatus.SelectedValue)); if (lvEditProjectSteps_hdnStepStatusId != null) { e.NewValues["ProjectId"] = Convert.ToInt32(lvEditProjectSteps_hdnProjectId.Value); e.NewValues["StepStatusId"] = infoStepStatus.Id; } else { Response.Write("cancel"); e.Cancel = true; } } else { Response.Write("cancel, not valid"); e.Cancel = true; } } protected void lvEditProjectSteps_rblStatus_OnSelectedIndexChanged(object sender, EventArgs e) { var oController = new Controller(); var rbl = (RadioButtonList)sender; var lvEditProjectSteps_txtText = (TextBox) rbl.NamingContainer.FindControl("lvEditProjectSteps_txtText"); var lvEditProjectSteps_txtComment = (TextBox)rbl.NamingContainer.FindControl("lvEditProjectSteps_txtComment"); var lvEditProjectSteps_hdnStepStatusStepId = (HiddenField) rbl.NamingContainer.FindControl("lvEditProjectSteps_hdnStepStatusStepId"); if (!String.IsNullOrEmpty(lvEditProjectSteps_hdnStepStatusStepId.Value) && lvEditProjectSteps_txtText != null && lvEditProjectSteps_txtComment != null) { var infoStep = oController.Step_SelectOne(Convert.ToInt32(lvEditProjectSteps_hdnStepStatusStepId.Value)); var infoStepStatus = oController.StepStatus_SelectOne_StepId_StatusId(Convert.ToInt32(lvEditProjectSteps_hdnStepStatusStepId.Value), Convert.ToInt32(rbl.SelectedValue)); lvEditProjectSteps_txtText.Text = infoStep.Name; lvEditProjectSteps_txtComment.Text = infoStepStatus.Text; } }

Read the article

Choose variable based on users choice from picklist.

- by Kelbizzle

I have this form. Basically what I want is to send a auto-response with a different URL based on what the user picks in the "attn" picklist. I've been thinking I could have a different variable for each drop down value. It will then pass this variable on to the mail script that will choose which URL to insert inside the auto response that is sent. It gives me a headache thinking about it sometimes. What's the easiest way to accomplish this? Am I making more work for myself? I really don't know because I'm no programmer. Thanks in advance! Here is the form: <form name="contact_form" method="post" action="sendemail_reports.php" onsubmit="return validate_form ( );"> <div id='zohoWebToLead' align=center> <table width="100%" border="0" align="center" cellpadding="0" cellspacing="0" class="txt_body"> <table border=0 cellspacing=0 cellpadding=5 width=480 style='border-bottom-color: #999999; border-top-color: #999999; border-bottom-style: none; border-top-style: none; border-bottom-width: 1px; border-top-width: 2px; background-color:transparent;'> <tr> <td width='75%'><table width=480 border=0 cellpadding=5 cellspacing=0 style='border-bottom-color: #999999; border-top-color: #999999; border-bottom-style: none; border-top-style: none; border-bottom-width: 1px; border-top-width: 2px; background-color:transparent;'> <input type="hidden" name="ip" value="'.$ipi.'" /> <input type="hidden" name="httpref" value="'.$httprefi.'" /> <input type="hidden" name="httpagent" value="'.$httpagenti.'" /> <tr></tr> <tr> <td colspan='2' align='left' style='border-bottom-color: #dadada; border-bottom-style: none; border-bottom-width: 2px; color:#000000; font-family:sans-serif; font-size:14px;'><strong>Send us an Email</strong></td> </tr> <tr> <td nowrap style='font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'> First Name : </td> <td width='75%'><input name='visitorf' type='text' size="48" maxlength='40' /></td> </tr> <tr> <td nowrap style='font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'>Last Name :</td> <td width='75%'><input name='visitorfl' type='text' size="48" maxlength='80' /></td> </tr> <tr> <td nowrap style= 'font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'> Email Adress : </td> <td width='75%'><input name='visitormail' type='text' size="48" maxlength='100' /></td> </tr> <tr> <td nowrap style='font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'> Phone : </td> <td width='75%'><input name='visitorphone' type='text' size="48" maxlength='30' /></td> </tr> <td nowrap style='font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'> Subject : </td> <td width='75%'><select name="attn" size="1"> <option value=" Investment Opportunities ">Investment Opportunities </option> <option value=" Vacation Rentals ">Vacation Rentals </option> <option value=" Real Estate Offerings ">Real Estate Offerings </option> <option value=" Gatherings ">Gatherings </option> <option value=" General ">General </option> </select></td> <tr> <td nowrap style= 'font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'> Message :<br /> <em>(max 5000 char)</em></td> <td width='75%'><textarea name='notes' maxlength='5000' cols="48" rows="3"></textarea></td> </tr> <tr> <td colspan=2 align=center style=''><input name='save' type='submit' class="boton" value=Send mail />     <input type='reset' name='reset' value=Reset class="boton" /></td> </tr> </table></td> </tr> </table> </div> </form> Here is the mail script: <?php //the 3 variables below were changed to use the SERVER variable $ip = $_SERVER['REMOTE_ADDR']; $httpref = $_SERVER['HTTP_REFERER']; $httpagent = $_SERVER['HTTP_USER_AGENT']; $visitorf = $_POST['visitorf']; $visitorl = $_POST['visitorl']; $visitormail = $_POST['visitormail']; $visitorphone = $_POST['visitorphone']; $notes = $_POST['notes']; $attn = $_POST['attn']; //additional headers $headers = 'From: Me <[email protected]>' . "\n" ; $headers = 'Bcc: [email protected]' . "\n"; if (eregi('http:', $notes)) { die ("Do NOT try that! ! "); } if(!$visitormail == "" && (!strstr($visitormail,"@") || !strstr($visitormail,"."))) { echo "<h2>Use Back - Enter valid e-mail</h2>\n"; $badinput = "<h2>Feedback was NOT submitted</h2>\n"; echo $badinput; die ("Go back! ! "); } if(empty($visitorf) || empty($visitormail) || empty($notes )) { echo "<h2>Use Back - fill in all fields</h2>\n"; die ("Use back! ! "); } $todayis = date("l, F j, Y, g:i a") ; $subject = "I want to download the report about $attn"; $notes = stripcslashes($notes); $message = "$todayis [EST] \nAttention: $attn \nMessage: $notes \nFrom: $visitorf $visitorl ($visitormail) \nTelephone Number: $visitorphone \nAdditional Info : IP = $ip \nBrowser Info: $httpagent \nReferral : $httpref\n"; //check if the function even exists if(function_exists("mail")) { //send the email mail($_SESSION['email'], $subject, $message, $headers) or die("could not send email"); } else { die("mail function not enabled"); } header( "Location: http://www.domain.com/thanks.php" ); ?>

Read the article

posting multiple radio button values to mysql using "foreach"

- by jeansymolanza

i have adjusted my code slightly but i am still having difficulty posting it to the table. could someone please provide me with an example of the foreach array? form page <div style="padding: 15px;"> <span class="loginfail" style="font-size:24px; font-weight: bold">Notifications</span><p> <?php include("progress_insertcomment.php"); ?> <?php // Make a MySQL Connection mysql_select_db("speedycm_data") or die(mysql_error()); $query_comment = "select * from tbl_alert order by id desc limit 1"; $comment = mysql_query($query_comment, $speedycms) or die(mysql_error()); $row_comment = mysql_fetch_assoc($comment); $totalRows_comment = mysql_num_rows($comment); ?>  <form method="post" action="<?php echo $_SERVER['PHP_SELF']; ?>"> <span id="sprytextarea1"> <textarea id='comment' name="comment" style="height: 75px; width:330px;"><?php echo $row_comment['comment']; ?></textarea> </span> <p> <button type="submit">Add</button> <input type="hidden" name="notc" value="1"/> </form>  <form method="post" action="<?php echo $_SERVER['PHP_SELF']; ?>"> <table border="0" cellspacing="2" cellpadding="2"> <?php if ( $row_comment == 0 ) { echo "<span style='font-size: 11px;'>No current alerts.</span>"; } else { // Get all the data from the "example" table $result = mysql_query("SELECT * FROM tbl_alert ORDER BY id DESC") or die(mysql_error()); while($rows=mysql_fetch_array($result)){ ?> <tr> <td> <?php echo "<div class='bubble'><div class='pimped'> <blockquote>" . $rows['comment'] . " </blockquote></div> <cite><strong>" . $rows['user'] . "</strong> @ " . $rows['date'] . "</cite> <span style='font-size: 10px;'> <p> <a href='editalert.php?id=". $rows['id'] ."' class='form' >Edit</a> • <a href='deletealert.php?id=". $rows['id'] ."' class='form'>Delete</a> </span> </div> "; ?> </td> <td valign="top" align="center"><div style="padding-left: 30px;"><span style="font-size: 10px;">Completed?</span> <p class="field switch">  <?php $status = $rows['status']; ?> <input type="radio" name="selstatus" value="no" <?php if($status == 'yes') {echo 'checked';} else {echo '';} ?>/> <input type="radio" name="selstatus" value="yes" <?php if($status == 'yes') {echo 'checked';} else {echo '';} ?>/> <input type="hidden" name="statusid" value="<?php echo $rows['id']; ?>"/> <label for="radio1" class="cb-enable <?php if($status == 'yes') {echo 'selected';} else {echo '';} ?>"><span>Yes</span></label> <label for="radio2" class="cb-disable <?php if($status == 'no') {echo 'selected';} else {echo '';} ?>"><span>No</span></label> </p> </div></td> </tr> <tr> <td></td> <?php } } ?> <td align="center"><div style="padding-left: 30px;"> <button type="submit">Update</button> <input type="hidden" name="notc2" value="1"/> </div></td> </tr> </table> </form> </div> </body> processing <?php // 6) update notifications if (array_key_exists('notc2',$_POST)) { echo "<p style='font-size: 12px;'>Thank you. The notifications have been updated successfully.<p>"; echo "<p><span style='font-size: 12px;'> <a onClick=\"history.go(-1)\" class='form'>Return</a></p> <p></span> "; exit; }; ?> after doing some research i learnt that the only way to insert multiple radio values into the MYSQL table is to use arrays. there was a similar question raised somewhere on this site: http://stackoverflow.com/questions/1656260/php-multiple-radio-buttons that recommended using a foreach loop. use a foreach loop <?php foreach ( $_POST as $key => $val ) echo "$key -> $val\n"; ?> $key will be the name of the selected option and $val, well, the value. how would this apply to my situation as i am struggling to find any help on the internet. i understand that i would use this on the processing page to pull out any radio values from the previous page and then loop the INSERT MYSQL code within the process until it was all done. any advice would be appreciated! GOD BLESS.

Read the article

Hide/Show some HTML table cells individually and align the remaining cells as they belong to the same row [closed]

- by Brian

[Edited at the resquest of admins] The best way I can explain my problem is showning an example. I have the table that you can see on the link below (since I can't post images...), that ha a table head (blue) and four rows, whose cells are green and white in color. I just want the white cells to hide/show alternately by clicking on green cells, which would remain always visible as parent cells. After hiding white cells, the green ones should be aligned into the same row, as they would fit like tetris bricks. That's all, I think more clear is impossible. http://i.stack.imgur.com/3n3In.jpg (follow the link to see the image explanation) The table code: <table class="columns" cellspacing="0" border="0"> <tr> <td class="left" rowspan="2"> <div style="text-align:center;"></div> </td> </tr><tr><td class="middle"> <div id="detail_table_source" style="display:none"></div> <br> <table id="detail_table" class="detail"> <colgroup> <col style="width:20px;"> <col style="width:40px;"> <col style="width:70px;"> <col style="width:20px;"> </colgroup> <thead> <tr> <th width="88">Blahhh</th> <th width="211">BLAHH</th> <th width="229">BLAHH</th> </tr> </thead> <tbody> <tr class="parent" id="row123" style="cursor: pointer; " title="Click to expand/collapse"> <td bgcolor="#A6A4CC">Blahhh</td> <td bgcolor="#A6A4CC">blah blah </td> <td bgcolor="#A6A4CC">Blahh</td> </tr> <tr class="child-row123" style="display: none; "> <td rowspan="3" bgcolor="#5B5B5B"> </td> <td>blah blah </td> <td>blah blah</td> </tr> <tr class="child-row123" style="display: none; "> <td>blah blah</td> <td>blah blah</td> </tr> <tr class="child-row123" style="display: none; "> <td>blah blah</td> <td>blah blah</td> </tr> <tr> <td bgcolor="#6B7A94" class="parent" id="row456" style="cursor: pointer; " title="Click to expand/collapse"><strong>Blahh</strong></td> <td bgcolor="#FFFFFF" class="child-cell456" style="display: none; ">blah blah</td> <td bgcolor="#FFFFFF" class="child-cell456" style="display: none; ">blah blah</td> </tr> <tr> <td rowspan="4" valign="top" bgcolor="#5B5B5B" class="child-row456" style="display: none; "> </td> <td bgcolor="#6B7A94" class="parent" id="cell456" style="cursor: pointer; " title="Click to expand/collapse">blah blah</td> <td bgcolor="#6B7A94" class="parent" id="cell456" style="cursor: pointer; " title="Click to expand/collapse">blah blah</td> </tr> <tr> <td class="child-cell456" style="display: none; ">blah blah</td> <td class="child-cell456" style="display: none; ">blah blah</td> </tr> <tr> <td class="child-cell456" style="display: none; ">blah blah</td> <td class="child-cell456" style="display: none; ">blah blah</td> </tr> </tbody> </table> The script to hide/show whole rows (this works because it is copied from another example): <script language="javascript"> $(function() { $('tr.parent') .css("cursor","pointer") .attr("title","Click to expand/collapse") .click(function(){ $(this).siblings('.child-'+this.id).toggle(); }); $('tr[@class^=child-]').hide().children('td'); }); </script> And the failed attempt at expanding/hiding individual cells: <script language="javascript"> $(function() { $('td.parent') .css("cursor","pointer") .attr("title","Click to expand/collapse") .click(function(){ $(this).siblings('.child-'+this.id).toggle(); }); $('td[@class^=child-]').hide().children('td'); }); </script>

Read the article

AngularJS on top of ASP.NET: Moving the MVC framework out to the browser

- by Varun Chatterji

Heavily drawing inspiration from Ruby on Rails, MVC4’s convention over configuration model of development soon became the Holy Grail of .NET web development. The MVC model brought with it the goodness of proper separation of concerns between business logic, data, and the presentation logic. However, the MVC paradigm, was still one in which server side .NET code could be mixed with presentation code. The Razor templating engine, though cleaner than its predecessors, still encouraged and allowed you to mix .NET server side code with presentation logic. Thus, for example, if the developer required a certain <div> tag to be shown if a particular variable ShowDiv was true in the View’s model, the code could look like the following: Fig 1: To show a div or not. Server side .NET code is used in the View Mixing .NET code with HTML in views can soon get very messy. Wouldn’t it be nice if the presentation layer (HTML) could be pure HTML? Also, in the ASP.NET MVC model, some of the business logic invariably resides in the controller. It is tempting to use an antipattern like the one shown above to control whether a div should be shown or not. However, best practice would indicate that the Controller should not be aware of the div. The ShowDiv variable in the model should not exist. A controller should ideally, only be used to do the plumbing of getting the data populated in the model and nothing else. The view (ideally pure HTML) should render the presentation layer based on the model. In this article we will see how Angular JS, a new JavaScript framework by Google can be used effectively to build web applications where: 1. Views are pure HTML 2. Controllers (in the server sense) are pure REST based API calls 3. The presentation layer is loaded as needed from partial HTML only files. What is MVVM? MVVM short for Model View View Model is a new paradigm in web development. In this paradigm, the Model and View stuff exists on the client side through javascript instead of being processed on the server through postbacks. These frameworks are JavaScript frameworks that facilitate the clear separation of the “frontend” or the data rendering logic from the “backend” which is typically just a REST based API that loads and processes data through a resource model. The frameworks are called MVVM as a change to the Model (through javascript) gets reflected in the view immediately i.e. Model > View. Also, a change on the view (through manual input) gets reflected in the model immediately i.e. View > Model. The following figure shows this conceptually (comments are shown in red): Fig 2: Demonstration of MVVM in action In Fig 2, two text boxes are bound to the same variable model.myInt. Thus, changing the view manually (changing one text box through keyboard input) also changes the other textbox in real time demonstrating V > M property of a MVVM framework. Furthermore, clicking the button adds 1 to the value of model.myInt thus changing the model through JavaScript. This immediately updates the view (the value in the two textboxes) thus demonstrating the M > V property of a MVVM framework. Thus we see that the model in a MVVM JavaScript framework can be regarded as “the single source of truth“. This is an important concept. Angular is one such MVVM framework. We shall use it to build a simple app that sends SMS messages to a particular number. Application, Routes, Views, Controllers, Scope and Models Angular can be used in many ways to construct web applications. For this article, we shall only focus on building Single Page Applications (SPAs). Many of the approaches we will follow in this article have alternatives. It is beyond the scope of this article to explain every nuance in detail but we shall try to touch upon the basic concepts and end up with a working application that can be used to send SMS messages using Sent.ly Plus (a service that is itself built using Angular). Before you read on, we would like to urge you to forget what you know about Models, Views, Controllers and Routes in the ASP.NET MVC4 framework. All these words have different meanings in the Angular world. Whenever these words are used in this article, they will refer to Angular concepts and not ASP.NET MVC4 concepts. The following figure shows the skeleton of the root page of an SPA: Fig 3: The skeleton of a SPA The skeleton of the application is based on the Bootstrap starter template which can be found at: http://getbootstrap.com/examples/startertemplate/ Apart from loading the Angular, jQuery and Bootstrap JavaScript libraries, it also loads our custom scripts /app/js/controllers.js /app/js/app.js These scripts define the routes, views and controllers which we shall come to in a moment. Application Notice that the body tag (Fig. 3) has an extra attribute: ngapp=”smsApp” Providing this tag “bootstraps” our single page application. It tells Angular to load a “module” called smsApp. This “module” is defined /app/js/app.js angular.module('smsApp', ['smsApp.controllers', function () {}]) Fig 4: The definition of our application module The line shows above, declares a module called smsApp. It also declares that this module “depends” on another module called “smsApp.controllers”. The smsApp.controllers module will contain all the controllers for our SPA. Routing and Views Notice that in the Navbar (in Fig 3) we have included two hyperlinks to: “#/app” “#/help” This is how Angular handles routing. Since the URLs start with “#”, they are actually just bookmarks (and not server side resources). However, our route definition (in /app/js/app.js) gives these URLs a special meaning within the Angular framework. angular.module('smsApp', ['smsApp.controllers', function () { }]) //Configure the routes .config(['$routeProvider', function ($routeProvider) { $routeProvider.when('/binding', { templateUrl: '/app/partials/bindingexample.html', controller: 'BindingController' }); }]); Fig 5: The definition of a route with an associated partial view and controller As we can see from the previous code sample, we are using the $routeProvider object in the configuration of our smsApp module. Notice how the code “asks for” the $routeProvider object by specifying it as a dependency in the [] braces and then defining a function that accepts it as a parameter. This is known as dependency injection. Please refer to the following link if you want to delve into this topic: http://docs.angularjs.org/guide/di What the above code snippet is doing is that it is telling Angular that when the URL is “#/binding”, then it should load the HTML snippet (“partial view”) found at /app/partials/bindingexample.html. Also, for this URL, Angular should load the controller called “BindingController”. We have also marked the div with the class “container” (in Fig 3) with the ngview attribute. This attribute tells Angular that views (partial HTML pages) defined in the routes will be loaded within this div. You can see that the Angular JavaScript framework, unlike many other frameworks, works purely by extending HTML tags and attributes. It also allows you to extend HTML with your own tags and attributes (through directives) if you so desire, you can find out more about directives at the following URL: http://www.codeproject.com/Articles/607873/ExtendingHTMLwithAngularJSDirectives Controllers and Models We have seen how we define what views and controllers should be loaded for a particular route. Let us now consider how controllers are defined. Our controllers are defined in the file /app/js/controllers.js. The following snippet shows the definition of the “BindingController” which is loaded when we hit the URL http://localhost:port/index.html#/binding (as we have defined in the route earlier as shown in Fig 5). Remember that we had defined that our application module “smsApp” depends on the “smsApp.controllers” module (see Fig 4). The code snippet below shows how the “BindingController” defined in the route shown in Fig 5 is defined in the module smsApp.controllers: angular.module('smsApp.controllers', [function () { }]) .controller('BindingController', ['$scope', function ($scope) { $scope.model = {}; $scope.model.myInt = 6; $scope.addOne = function () { $scope.model.myInt++; } }]); Fig 6: The definition of a controller in the “smsApp.controllers” module. The pieces are falling in place! Remember Fig.2? That was the code of a partial view that was loaded within the container div of the skeleton SPA shown in Fig 3. The route definition shown in Fig 5 also defined that the controller called “BindingController” (shown in Fig 6.) was loaded when we loaded the URL: http://localhost:22544/index.html#/binding The button in Fig 2 was marked with the attribute ngclick=”addOne()” which added 1 to the value of model.myInt. In Fig 6, we can see that this function is actually defined in the “BindingController”. Scope We can see from Fig 6, that in the definition of “BindingController”, we defined a dependency on $scope and then, as usual, defined a function which “asks for” $scope as per the dependency injection pattern. So what is $scope? Any guesses? As you might have guessed a scope is a particular “address space” where variables and functions may be defined. This has a similar meaning to scope in a programming language like C#. Model: The Scope is not the Model It is tempting to assign variables in the scope directly. For example, we could have defined myInt as $scope.myInt = 6 in Fig 6 instead of $scope.model.myInt = 6. The reason why this is a bad idea is that scope in hierarchical in Angular. Thus if we were to define a controller which was defined within the another controller (nested controllers), then the inner controller would inherit the scope of the parent controller. This inheritance would follow JavaScript prototypal inheritance. Let’s say the parent controller defined a variable through $scope.myInt = 6. The child controller would inherit the scope through java prototypical inheritance. This basically means that the child scope has a variable myInt that points to the parent scopes myInt variable. Now if we assigned the value of myInt in the parent, the child scope would be updated with the same value as the child scope’s myInt variable points to the parent scope’s myInt variable. However, if we were to assign the value of the myInt variable in the child scope, then the link of that variable to the parent scope would be broken as the variable myInt in the child scope now points to the value 6 and not to the parent scope’s myInt variable. But, if we defined a variable model in the parent scope, then the child scope will also have a variable model that points to the model variable in the parent scope. Updating the value of $scope.model.myInt in the parent scope would change the model variable in the child scope too as the variable is pointed to the model variable in the parent scope. Now changing the value of $scope.model.myInt in the child scope would ALSO change the value in the parent scope. This is because the model reference in the child scope is pointed to the scope variable in the parent. We did no new assignment to the model variable in the child scope. We only changed an attribute of the model variable. Since the model variable (in the child scope) points to the model variable in the parent scope, we have successfully changed the value of myInt in the parent scope. Thus the value of $scope.model.myInt in the parent scope becomes the “single source of truth“. This is a tricky concept, thus it is considered good practice to NOT use scope inheritance. More info on prototypal inheritance in Angular can be found in the “JavaScript Prototypal Inheritance” section at the following URL: https://github.com/angular/angular.js/wiki/UnderstandingScopes. Building It: An Angular JS application using a .NET Web API Backend Now that we have a perspective on the basic components of an MVVM application built using Angular, let’s build something useful. We will build an application that can be used to send out SMS messages to a given phone number. The following diagram describes the architecture of the application we are going to build: Fig 7: Broad application architecture We are going to add an HTML Partial to our project. This partial will contain the form fields that will accept the phone number and message that needs to be sent as an SMS. It will also display all the messages that have previously been sent. All the executable code that is run on the occurrence of events (button clicks etc.) in the view resides in the controller. The controller interacts with the ASP.NET WebAPI to get a history of SMS messages, add a message etc. through a REST based API. For the purposes of simplicity, we will use an in memory data structure for the purposes of creating this application. Thus, the tasks ahead of us are: Creating the REST WebApi with GET, PUT, POST, DELETE methods. Creating the SmsView.html partial Creating the SmsController controller with methods that are called from the SmsView.html partial Add a new route that loads the controller and the partial. 1. Creating the REST WebAPI This is a simple task that should be quite straightforward to any .NET developer. The following listing shows our ApiController: public class SmsMessage { public string to { get; set; } public string message { get; set; } } public class SmsResource : SmsMessage { public int smsId { get; set; } } public class SmsResourceController : ApiController { public static Dictionary<int, SmsResource> messages = new Dictionary<int, SmsResource>(); public static int currentId = 0; // GET api/<controller> public List<SmsResource> Get() { List<SmsResource> result = new List<SmsResource>(); foreach (int key in messages.Keys) { result.Add(messages[key]); } return result; } // GET api/<controller>/5 public SmsResource Get(int id) { if (messages.ContainsKey(id)) return messages[id]; return null; } // POST api/<controller> public List<SmsResource> Post([FromBody] SmsMessage value) { //Synchronize on messages so we don't have id collisions lock (messages) { SmsResource res = (SmsResource) value; res.smsId = currentId++; messages.Add(res.smsId, res); //SentlyPlusSmsSender.SendMessage(value.to, value.message); return Get(); } } // PUT api/<controller>/5 public List<SmsResource> Put(int id, [FromBody] SmsMessage value) { //Synchronize on messages so we don't have id collisions lock (messages) { if (messages.ContainsKey(id)) { //Update the message messages[id].message = value.message; messages[id].to = value.message; } return Get(); } } // DELETE api/<controller>/5 public List<SmsResource> Delete(int id) { if (messages.ContainsKey(id)) { messages.Remove(id); } return Get(); } } Once this class is defined, we should be able to access the WebAPI by a simple GET request using the browser: http://localhost:port/api/SmsResource Notice the commented line: //SentlyPlusSmsSender.SendMessage The SentlyPlusSmsSender class is defined in the attached solution. We have shown this line as commented as we want to explain the core Angular concepts. If you load the attached solution, this line is uncommented in the source and an actual SMS will be sent! By default, the API returns XML. For consumption of the API in Angular, we would like it to return JSON. To change the default to JSON, we make the following change to WebApiConfig.cs file located in the App_Start folder. public static class WebApiConfig { public static void Register(HttpConfiguration config) { config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); var appXmlType = config.Formatters.XmlFormatter. SupportedMediaTypes. FirstOrDefault( t => t.MediaType == "application/xml"); config.Formatters.XmlFormatter.SupportedMediaTypes.Remove(appXmlType); } } We now have our backend REST Api which we can consume from Angular! 2. Creating the SmsView.html partial This simple partial will define two fields: the destination phone number (international format starting with a +) and the message. These fields will be bound to model.phoneNumber and model.message. We will also add a button that we shall hook up to sendMessage() in the controller. A list of all previously sent messages (bound to model.allMessages) will also be displayed below the form input. The following code shows the code for the partial:  <div class="well" style="margin-top: 30px;"> <table style="width: 100%;"> <tr> <td style="width: 45%; text-align: center;"> <input type="text" placeholder="Phone number (eg; +44 7778 609466)" ng-model="model.phoneNumber" class="form-control" style="width: 90%" onkeypress="return checkPhoneInput();" /> </td> <td style="width: 45%; text-align: center;"> <input type="text" placeholder="Message" ng-model="model.message" class="form-control" style="width: 90%" /> </td> <td style="text-align: center;"> <button class="btn btn-danger" ng-click="sendMessage();" ng-disabled="model.isAjaxInProgress" style="marginright: 5px;">Send</button> <img src="/Content/ajax-loader.gif" ng-show="model.isAjaxInProgress" /> </td> </tr> </table> </div>  <div style="margin-top: 30px;">  <div ng-show="model.allMessages.length == 0"> No messages have been sent yet! </div>  <div ng-show="model.allMessages.length == 0"> <table style="width: 100%;" class="table table-striped"> <tr> <td>Phone Number</td> <td>Message</td> <td></td> </tr>  <tr ng-repeat="message in model.allMessages"> <td>{{ message.to }}</td> <td>{{ message.message }}</td> <td> <button class="btn btn-danger" ng-click="delete(message.smsId);" ng-disabled="model.isAjaxInProgress">Delete</button> </td> </tr> </table> </div> </div> The above code is commented and should be self explanatory. Conditional rendering is achieved through using the ng-show=”condition” attribute on various div tags. Input fields are bound to the model and the send button is bound to the sendMessage() function in the controller as through the ngclick=”sendMessage()” attribute defined on the button tag. While AJAX calls are taking place, the controller sets model.isAjaxInProgress to true. Based on this variable, buttons are disabled through the ng-disabled directive which is added as an attribute to the buttons. The ng-repeat directive added as an attribute to the tr tag causes the table row to be rendered multiple times much like an ASP.NET repeater. 3. Creating the SmsController controller The penultimate piece of our application is the controller which responds to events from our view and interacts with our MVC4 REST WebAPI. The following listing shows the code we need to add to /app/js/controllers.js. Note that controller definitions can be chained. Also note that this controller “asks for” the $http service. The $http service is a simple way in Angular to do AJAX. So far we have only encountered modules, controllers, views and directives in Angular. The $http is new entity in Angular called a service. More information on Angular services can be found at the following URL: http://docs.angularjs.org/guide/dev_guide.services.understanding_services. .controller('SmsController', ['$scope', '$http', function ($scope, $http) { //We define the model $scope.model = {}; //We define the allMessages array in the model //that will contain all the messages sent so far $scope.model.allMessages = []; //The error if any $scope.model.errorMessage = undefined; //We initially load data so set the isAjaxInProgress = true; $scope.model.isAjaxInProgress = true; //Load all the messages $http({ url: '/api/smsresource', method: "GET" }). success(function (data, status, headers, config) { this callback will be called asynchronously //when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }). error(function (data, status, headers, config) { //called asynchronously if an error occurs //or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); $scope.delete = function (id) { //We are making an ajax call so we set this to true $scope.model.isAjaxInProgress = true; $http({ url: '/api/smsresource/' + id, method: "DELETE" }). success(function (data, status, headers, config) { // this callback will be called asynchronously // when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); error(function (data, status, headers, config) { // called asynchronously if an error occurs // or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); } $scope.sendMessage = function () { $scope.model.errorMessage = undefined; var message = ''; if($scope.model.message != undefined) message = $scope.model.message.trim(); if ($scope.model.phoneNumber == undefined || $scope.model.phoneNumber == '' || $scope.model.phoneNumber.length < 10 || $scope.model.phoneNumber[0] != '+') { $scope.model.errorMessage = "You must enter a valid phone number in international format. Eg: +44 7778 609466"; return; } if (message.length == 0) { $scope.model.errorMessage = "You must specify a message!"; return; } //We are making an ajax call so we set this to true $scope.model.isAjaxInProgress = true; $http({ url: '/api/smsresource', method: "POST", data: { to: $scope.model.phoneNumber, message: $scope.model.message } }). success(function (data, status, headers, config) { // this callback will be called asynchronously // when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }). error(function (data, status, headers, config) { // called asynchronously if an error occurs // or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status // We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); } }]); We can see from the previous listing how the functions that are called from the view are defined in the controller. It should also be evident how easy it is to make AJAX calls to consume our MVC4 REST WebAPI. Now we are left with the final piece. We need to define a route that associates a particular path with the view we have defined and the controller we have defined. 4. Add a new route that loads the controller and the partial This is the easiest part of the puzzle. We simply define another route in the /app/js/app.js file: $routeProvider.when('/sms', { templateUrl: '/app/partials/smsview.html', controller: 'SmsController' }); Conclusion In this article we have seen how much of the server side functionality in the MVC4 framework can be moved to the browser thus delivering a snappy and fast user interface. We have seen how we can build client side HTML only views that avoid the messy syntax offered by server side Razor views. We have built a functioning app from the ground up. The significant advantage of this approach to building web apps is that the front end can be completely platform independent. Even though we used ASP.NET to create our REST API, we could just easily have used any other language such as Node.js, Ruby etc without changing a single line of our front end code. Angular is a rich framework and we have only touched on basic functionality required to create a SPA. For readers who wish to delve further into the Angular framework, we would recommend the following URL as a starting point: http://docs.angularjs.org/misc/started. To get started with the code for this project: Sign up for an account at http://plus.sent.ly (free) Add your phone number Go to the “My Identies Page” Note Down your Sender ID, Consumer Key and Consumer Secret Download the code for this article at: https://docs.google.com/file/d/0BzjEWqSE31yoZjZlV0d0R2Y3eW8/edit?usp=sharing Change the values of Sender Id, Consumer Key and Consumer Secret in the web.config file Run the project through Visual Studio!

Read the article

Perl, LibXML and Schemas

- by Xetius

I have an example Perl script which I am trying to load and validate a file against a schema, them interrogate various nodes. #!/usr/bin/env perl use strict; use warnings; use XML::LibXML; my $filename = 'source.xml'; my $xml_schema = XML::LibXML::Schema->new(location=>'library.xsd'); my $parser = XML::LibXML->new (); my $doc = $parser->parse_file ($filename); eval { $xml_schema->validate ($doc); }; if ($@) { print "File failed validation: $@" if $@; } eval { print "Here\n"; foreach my $book ($doc->findnodes('/library/book')) { my $title = $book->findnodes('./title'); print $title->to_literal(), "\n"; } }; if ($@) { print "Problem parsing data : $@\n"; } Unfortunately, although it is validating the XML file fine, it is not finding any $book items and therefore not printing out anything. If I remove the schema from the XML file and the validation from the PL file then it works fine. I am using the default namespace. If I change it to not use the default namespace (xmlns:lib="http://libs.domain.com" and prefix all items in the XML file with lib and change the XPath expressions to include the namespace prefix (/lib:library/lib:book) then it again works file. Why? and what am I missing? XML: <?xml version="1.0" encoding="utf-8"?> <library xmlns="http://lib.domain.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://lib.domain.com .\library.xsd"> <book> <title>Perl Best Practices</title> <author>Damian Conway</author> <isbn>0596001738</isbn> <pages>542</pages> <image src="http://www.oreilly.com/catalog/covers/perlbp.s.gif" width="145" height="190"/> </book> <book> <title>Perl Cookbook, Second Edition</title> <author>Tom Christiansen</author> <author>Nathan Torkington</author> <isbn>0596003137</isbn> <pages>964</pages> <image src="http://www.oreilly.com/catalog/covers/perlckbk2.s.gif" width="145" height="190"/> </book> <book> <title>Guitar for Dummies</title> <author>Mark Phillips</author> <author>John Chappell</author> <isbn>076455106X</isbn> <pages>392</pages> <image src="http://media.wiley.com/product_data/coverImage/6X/07645510/076455106X.jpg" width="100" height="125"/> </book> </library> XSD: <?xml version="1.0" encoding="utf-8"?> <xs:schema xmlns="http://lib.domain.com" xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" targetNamespace="http://lib.domain.com"> <xs:attributeGroup name="imagegroup"> <xs:attribute name="src" type="xs:string"/> <xs:attribute name="width" type="xs:integer"/> <xs:attribute name="height" type="xs:integer"/> </xs:attributeGroup> <xs:element name="library"> <xs:complexType> <xs:sequence> <xs:element maxOccurs="unbounded" name="book"> <xs:complexType> <xs:sequence> <xs:element name="title" type="xs:string"/> <xs:element maxOccurs="unbounded" name="author" type="xs:string"/> <xs:element name="isbn" type="xs:string"/> <xs:element name="pages" type="xs:integer"/> <xs:element name="image"> <xs:complexType> <xs:attributeGroup ref="imagegroup"/> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:schema>

Read the article

DESIGNING FOR WIN PHONE 7

Designing applications for the Win Phone 7 is very similar to designing for print. In my opinion, it feels like a cross between a tri-fold brochure and a poster. I based my prototype designs on Microsofts Metro style guide, with typography as the main focus and stunning imagery for support. Its nice to have fixed factors regulating the design, making it a fun and fresh design experience. Microsoft provides a UI Design Guidelines document that outlines layout sizes, background image size, recommended typefaces and spacing. You know what you are designing for and you know how it will look and act on the win phone 7 platform. Although applications are not required to strictly adhere to the Metro style guide I feel it makes the best use of the panorama view and navigation. With strong examples of this UI concept in place like their Zune-like music + videos hub, I found it fairly easy to put together a few quick app mockups (see below). In addition to design guidelines, using a ready built design templates, or a win phone 7 specific panorama control like the one by Clarity Consulting will make the process of bringing your designs to life much more efficient. Likes, Dislikes, and Challenges I think the idea of the hub is completely intuitive. This concept clearly breaks down info into more manageable pieces, and greatly helps with organization when designing for the phone. I like the chromeless appearance, allowing the core functionality of the application to take precedence over gradients, textures, bevels, drop shadows, and the complicated animations you see on the web. Although I understand the Win Phone 7 guidelines are a work in progress, I found a few contradictions. I also noticed that certain design specifications did not translate well to the phone emulator . If you use their guidelines as suggested best practices and not as fixed definitions you will have more success. Multi-directional vs Linear The main challenge I had was stepping away from familiar navigational examples seen in other mobile phones. I had to keep reminding myself that the content to the right and to the left of what I was working on didnt necessarily have to have a direct link to one another. I started thinking multi-directional as opposed to linear. Win phone 7 vs IPhone The Metro styling of the Win Phone 7 is similar to the Zune HD and the Windows Media Center UI and offers a different interface paradigm than the IPhone. When navigating an application it feels like you are panning a long seamless page of information in contrast to the multiple panels of an IPhone. I think there is less of an opportunity to overdesign your application, which happens often with IPhone applications. While both interfaces are simple and sleek, win phone 7 really gets down to the basics. IPhone sets a high standard for designing for touch, designing for win phone 7 could improve on that user experience with a consistent and strategic use of white space and staying away from a menu and icon heavy UI. Design Examples for Win Phone 7 Applications Here are some concepts for both generic and brand specific applications for Win Phone 7: View Full Album Resources to get you going with your own Win Phone 7 design: Helpful design templates for Win Phone 7 http://www.shazaml.com/archives/windows-phone-7-ui-templates Here is the interaction design guide for Win Phone 7 http://go.microsoft.com/?linkid=9713252 Windows has a project template for Blend 4 and Visual Studio 2010 RC1 http://developer.windowsphone.com/ Clarity Consulting developed a panorama control for Win Phone 7 http://blogs.claritycon.com/blogs/design/archive/2010/03/30/building-the-elusive-windows-phone-panorama-control.aspxDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

DESIGNING FOR WIN PHONE 7

Designing applications for the Win Phone 7 is very similar to designing for print. In my opinion, it feels like a cross between a tri-fold brochure and a poster. I based my prototype designs on Microsofts Metro style guide, with typography as the main focus and stunning imagery for support. Its nice to have fixed factors regulating the design, making it a fun and fresh design experience. Microsoft provides a UI Design Guidelines document that outlines layout sizes, background image size, recommended typefaces and spacing. You know what you are designing for and you know how it will look and act on the win phone 7 platform. Although applications are not required to strictly adhere to the Metro style guide I feel it makes the best use of the panorama view and navigation. With strong examples of this UI concept in place like their Zune-like music + videos hub, I found it fairly easy to put together a few quick app mockups (see below). In addition to design guidelines, using a ready built design templates, or a win phone 7 specific panorama control like the one by Clarity Consulting will make the process of bringing your designs to life much more efficient. Likes, Dislikes, and Challenges I think the idea of the hub is completely intuitive. This concept clearly breaks down info into more manageable pieces, and greatly helps with organization when designing for the phone. I like the chromeless appearance, allowing the core functionality of the application to take precedence over gradients, textures, bevels, drop shadows, and the complicated animations you see on the web. Although I understand the Win Phone 7 guidelines are a work in progress, I found a few contradictions. I also noticed that certain design specifications did not translate well to the phone emulator . If you use their guidelines as suggested best practices and not as fixed definitions you will have more success. Multi-directional vs Linear The main challenge I had was stepping away from familiar navigational examples seen in other mobile phones. I had to keep reminding myself that the content to the right and to the left of what I was working on didnt necessarily have to have a direct link to one another. I started thinking multi-directional as opposed to linear. Win phone 7 vs IPhone The Metro styling of the Win Phone 7 is similar to the Zune HD and the Windows Media Center UI and offers a different interface paradigm than the IPhone. When navigating an application it feels like you are panning a long seamless page of information in contrast to the multiple panels of an IPhone. I think there is less of an opportunity to overdesign your application, which happens often with IPhone applications. While both interfaces are simple and sleek, win phone 7 really gets down to the basics. IPhone sets a high standard for designing for touch, designing for win phone 7 could improve on that user experience with a consistent and strategic use of white space and staying away from a menu and icon heavy UI. Design Examples for Win Phone 7 Applications Here are some concepts for both generic and brand specific applications for Win Phone 7: View Full Album Resources to get you going with your own Win Phone 7 design: Helpful design templates for Win Phone 7 http://www.shazaml.com/archives/windows-phone-7-ui-templates Here is the interaction design guide for Win Phone 7 http://go.microsoft.com/?linkid=9713252 Windows has a project template for Blend 4 and Visual Studio 2010 RC1 http://developer.windowsphone.com/ Clarity Consulting developed a panorama control for Win Phone 7 http://blogs.claritycon.com/blogs/design/archive/2010/03/30/building-the-elusive-windows-phone-panorama-control.aspxDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Required Skill Sets Of A Software Architect

The question has been asked as to what is the required skill sets of a software architect. The answer to this is that it truly depends. When I state that it depend, it depends on the organization, industry, and skill sets available on the open market and internally within a company. With open ended skill sets even Napoleon Dynamite could be an architect. Napoleon Dynamite’s Skills Pedro: Have you asked anybody yet? Napoleon Dynamite: No, but who would? I don't even have any good skills. Pedro: What do you mean? Napoleon Dynamite: You know, like nunchuck skills, bow hunting skills, computer hacking skills... Girls only want boyfriends who have great skills. Pedro: Aren't you pretty good at drawing, like animals and warriors and stuff? This example might be a little off base but it does illustrate a point. What are the real required skills of a software architect? In my opinion, an architect needs to demonstrate the knowledge of the following three main skill set categories so that they are successful. General Skill Sets of an Architect Basic Engineering Skills Organizational Skills Interpersonal Skills Basic Engineering Skills are a very large part of what a software architect deal with on a daily bases when designing or updating systems. Think about it, how good would a lead mechanic be if they did not know how to fix or repair cars? They would not be, and that is my point that architects need to have at least some basic skills regarding engineering. The skills listed below are generic in nature because they change from job to job, so in this discussion I am trying to focus more on generalities so that anyone can apply this information to their individual situation. Common Basic Engineering Skills Data Modeling Code Creation Configuration Testing Deployment/Publishing System and Environment Knowledge Organizational Skills If an Architect works for or with an origination then they will need strong organization skills to survive. An architect is no use to a project if the project is missed managed. Additionally, budgets and timelines can really affect a company and their products when established deadlines are repeated not meet. By not meeting these timelines a company is forced to cancel the project and waste all the money and time spent or spend more money until it is completed, if it is ever completed. Common Organizational Skills Project Management Estimation (Cost and Time) Creation and Maintenance of Accepted Standards Interpersonal Skills For me personally Interpersonal skill ranks above the other types of skill sets because an architect can quickly pick up the other two skill sets by communicating with other team/project members so that they are quickly up to speed on a project. Additionally, in order for an architect to manage a project or even derive rough estimates they will more than likely have to consult with others actually working on the code (Programmers/Software Engineers) to get there estimates since they will be the ones actually working on the changes to be implemented. Common Interpersonal Skills Good Communicator Focus on projects success over personal Honors roles within a team Reference: Taylor, R. N., Medvidovic, N., & Dashofy, E. M. (2009). Software architecture: Foundations, theory, and practice Hoboken, NJ: John Wiley & Sons

Read the article

Travelling MVP #1: Visit to SharePoint User Group Finland

- by DigiMortal

My first self organized trip this autumn was visit to SharePoint User Group Finland community evening. As active community leaders who make things like these possible they are worth mentioning and on spug.fi side there was Jussi Roine the one who invited me. Here is my short review about my trip to Helsinki. User group meeting As Helsinki is near Tallinn I went there using ship. It was easy to get from sea port to venue and I had also some minutes of time to visit academic book store. Community evening was held on the ground floor of one city center hotel and room was conveniently located near hotel bar and restaurant. Here is the meeting schedule: Welcome (Jussi Roine) OpenText application archiving and governance for SharePoint (Bernd Hennicke, OpenText) Using advanced C# features in SharePoint development (Alexey Sadomov, NED Consulting) Optimizing public-facing internet sites for SharePoint (Gunnar Peipman) After meeting, of course, local dudes doesn’t walk away but continue with some beers and discussion. Sessions After welcome words by Jussi there was session by Bernd Hennicke who spoke about OpenText. His session covered OpenText history and current moment. After this introduction he spoke about OpenText products for SharePoint and gave the audience good overview about where their SharePoint extensions fit in big picture. I usually don’t like those vendors sessions but this one was good. I mean vendor dudes were not aggressively selling something. They were way different – kind people who introduced their stuff and later answered questions. They acted like good guests. Second speaker was Alexey Sadomov who is working on SharePoint development projects. He introduced some ways how to get over some limitations of SharePoint. I don’t go here deeply with his session but it’s worth to mention that this session was strong one. It is not rear case when developers have to make nasty hacks to SharePoint. I mean really nasty hacks. Often these hacks are long blocks of code that uses terrible techniques to achieve the result. Alexey introduced some very much civilized ways about how to apply hacks. Alex Sadomov, SharePoint MVP, speaking about SharePoint coding tips and tricks on C# I spoke about how I optimized caching of Estonian Microsoft community portal that runs on SharePoint Server and that uses publishing infrastructure. I made no actual demos on SharePoint because I wanted to focus on optimizing process and share some experiences about how to get caches optimized and how to measure caches. Networking After official part there was time to talk and discuss with people. Finns are cool – they have beers and they are glad. It was not big community event but people were like one good family. Developers there work often for big companies and it was very interesting to me to hear about their experiences with SharePoint. One thing was a little bit surprising for me – SharePoint guys in Finland are talking actively also about Office 365 and online SharePoint. It doesn’t happen often here in Estonia. I had to leave a little bit 21:00 to get to my ship back to Tallinn. I am sure spug.fi dudes continued nice evening and they had at least same good time as I did. Do I want to go back to Finland and meet these guys again? Yes, sure, let’s do it again! :)

Read the article

Windows Azure: General Availability of Web Sites + Mobile Services, New AutoScale + Alerts Support, No Credit Card Needed for MSDN

- by ScottGu

This morning we released a major set of updates to Windows Azure. These updates included: Web Sites: General Availability Release of Windows Azure Web Sites with SLA Mobile Services: General Availability Release of Windows Azure Mobile Services with SLA Auto-Scale: New automatic scaling support for Web Sites, Cloud Services and Virtual Machines Alerts/Notifications: New email alerting support for all Compute Services (Web Sites, Mobile Services, Cloud Services, and Virtual Machines) MSDN: No more credit card requirement for sign-up All of these improvements are now available to use immediately (note: some are still in preview). Below are more details about them. Web Sites: General Availability Release of Windows Azure Web Sites I’m incredibly excited to announce the General Availability release of Windows Azure Web Sites. The Windows Azure Web Sites service is perfect for hosting a web presence, building customer engagement solutions, and delivering business web apps. Today’s General Availability release means we are taking off the “preview” tag from the Free and Standard (formerly called reserved) tiers of Windows Azure Web Sites. This means we are providing: A 99.9% monthly SLA (Service Level Agreement) for the Standard tier Microsoft Support available on a 24x7 basis (with plans that range from developer plans to enterprise Premier support) The Free tier runs in a shared compute environment and supports up to 10 web sites. While the Free tier does not come with an SLA, it works great for rapid development and testing and enables you to quickly spike out ideas at no cost. The Standard tier, which was called “Reserved” during the preview, runs using dedicated per-customer VM instances for great performance, isolation and scalability, and enables you to host up to 500 different Web sites within them. You can easily scale your Standard instances on-demand using the Windows Azure Management Portal. You can adjust VM instance sizes from a Small instance size (1 core, 1.75GB of RAM), up to a Medium instance size (2 core, 3.5GB of RAM), or Large instance (4 cores and 7 GB RAM). You can choose to run between 1 and 10 Standard instances, enabling you to easily scale up your web backend to 40 cores of CPU and 70GB of RAM: Today’s release also includes general availability support for custom domain SSL certificate bindings for web sites running using the Standard tier. Customers will be able to utilize certificates they purchase for their custom domains and use either SNI or IP based SSL encryption. SNI encryption is available for all modern browsers and does not require an IP address. SSL certificates can be used for individual sites or wild-card mapped across multiple sites (we charge extra for the use of a SSL cert – but the fee is per-cert and not per site which means you pay once for it regardless of how many sites you use it with). Today’s release also includes the following new features: Auto-Scale support Today’s Windows Azure release adds preview support for Auto-Scaling web sites. This enables you to setup automatic scale rules based on the activity of your instances – allowing you to automatically scale down (and save money) when they are below a CPU threshold you define, and automatically scale up quickly when traffic increases. See below for more details. 64-bit and 32-bit mode support You can now choose to run your standard tier instances in either 32-bit or 64-bit mode (previously they only ran in 32-bit mode). This enables you to address even more memory within individual web applications. Memory dumps Memory dumps can be very useful for diagnosing issues and debugging apps. Using a REST API, you can now get a memory dump of your sites, which you can then use for investigating issues in Visual Studio Debugger, WinDbg, and other tools. Scaling Sites Independently Prior to today’s release, all sites scaled up/down together whenever you scaled any site in a sub-region. So you may have had to keep your proof-of-concept or testing sites in a separate sub-region if you wanted to keep them in the Free tier. This will no longer be necessary. Windows Azure Web Sites can now mix different tier levels in the same geographic sub-region. This allows you, for example, to selectively move some of your sites in the West US sub-region up to Standard tier when they require the features, scalability, and SLA of the Standard tier. Full pricing details on Windows Azure Web Sites can be found here. Note that the “Shared Tier” of Windows Azure Web Sites remains in preview mode (and continues to have discounted preview pricing). Mobile Services: General Availability Release of Windows Azure Mobile Services I’m incredibly excited to announce the General Availability release of Windows Azure Mobile Services. Mobile Services is perfect for building scalable cloud back-ends for Windows 8.x, Windows Phone, Apple iOS, Android, and HTML/JavaScript applications. Customers We’ve seen tremendous adoption of Windows Azure Mobile Services since we first previewed it last September, and more than 20,000 customers are now running mobile back-ends in production using it. These customers range from startups like Yatterbox, to university students using Mobile Services to complete apps like Sly Fox in their spare time, to media giants like Verdens Gang finding new ways to deliver content, and telcos like TalkTalk Business delivering the up-to-the-minute information their customers require. In today’s Build keynote, we demonstrated how TalkTalk Business is using Windows Azure Mobile Services to deliver service, outage and billing information to its customers, wherever they might be. Partners When we unveiled the source control and Custom API features I blogged about two weeks ago, we enabled a range of new scenarios, one of which is a more flexible way to work with third party services. The following blogs, samples and tutorials from our partners cover great ways you can extend Mobile Services to help you build rich modern apps: New Relic allows developers to monitor and manage the end-to-end performance of iOS and Android applications connected to Mobile Services. SendGrid eliminates the complexity of sending email from Mobile Services, saving time and money, while providing reliable delivery to the inbox. Twilio provides a telephony infrastructure web service in the cloud that you can use with Mobile Services to integrate phone calls, text messages and IP voice communications into your mobile apps. Xamarin provides a Mobile Services add on to make it easy building cross-platform connected mobile aps. Pusher allows quickly and securely add scalable real-time messaging functionality to Mobile Services-based web and mobile apps. Visual Studio 2013 and Windows 8.1 This week during //build/ keynote, we demonstrated how Visual Studio 2013, Mobile Services and Windows 8.1 make building connected apps easier than ever. Developers building Windows 8 applications in Visual Studio can now connect them to Windows Azure Mobile Services by simply right clicking then choosing Add Connected Service. You can either create a new Mobile Service or choose existing Mobile Service in the Add Connected Service dialog. Once completed, Visual Studio adds a reference to Mobile Services SDK to your project and generates a Mobile Services client initialization snippet automatically. Add Push Notifications Push Notifications and Live Tiles are a key to building engaging experiences. Visual Studio 2013 and Mobile Services make it super easy to add push notifications to your Windows 8.1 app, by clicking Add a Push Notification item: The Add Push Notification wizard will then guide you through the registration with the Windows Store as well as connecting your app to a new or existing mobile service. Upon completion of the wizard, Visual Studio will configure your mobile service with the WNS credentials, as well as add sample logic to your client project and your mobile service that demonstrates how to send push notifications to your app. Server Explorer Integration In Visual Studio 2013 you can also now view your Mobile Services in the the Server Explorer. You can add tables, edit, and save server side scripts without ever leaving Visual Studio, as shown on the image below: Pricing With today’s general availability release we are announcing that we will be offering Mobile Services in three tiers – Free, Standard, and Premium. Each tier is metered using a simple pricing model based on the # of API calls (bandwidth is included at no extra charge), and the Standard and Premium tiers are backed by 99.9% monthly SLAs. You can elastically scale up or down the number of instances you have of each tier to increase the # of API requests your service can support – allowing you to efficiently scale as your business grows. The following table summarizes the new pricing model (full pricing details here): You can find the full details of the new pricing model here. Build Conference Talks The //BUILD/ conference will be packed with sessions covering every aspect of developing connected applications with Mobile Services. The best part is that, even if you can’t be with us in San Francisco, every session is being streamed live. Be sure not to miss these talks: Mobile Services – Soup to Nuts — Josh Twist Building Cross-Platform Apps with Windows Azure Mobile Services — Chris Risner Connected Windows Phone Apps made Easy with Mobile Services — Yavor Georgiev Build Connected Windows 8.1 Apps with Mobile Services — Nick Harris Who’s that user? Identity in Mobile Apps — Dinesh Kulkarni Building REST Services with JavaScript — Nathan Totten Going Live and Beyond with Windows Azure Mobile Services — Kirill Gavrylyuk , Paul Batum Protips for Windows Azure Mobile Services — Chris Risner AutoScale: Dynamically scale up/down your app based on real-world usage One of the key benefits of Windows Azure is that you can dynamically scale your application in response to changing demand. In the past, though, you have had to either manually change the scale of your application, or use additional tooling (such as WASABi or MetricsHub) to automatically scale your application. Today, we’re announcing that AutoScale will be built-into Windows Azure directly. With today’s release it is now enabled for Cloud Services, Virtual Machines and Web Sites (Mobile Services support will come soon). Auto-scale enables you to configure Windows Azure to automatically scale your application dynamically on your behalf (without any manual intervention) so you can achieve the ideal performance and cost balance. Once configured it will regularly adjust the number of instances running in response to the load in your application. Currently, we support two different load metrics: CPU percentage Storage queue depth (Cloud Services and Virtual Machines only) We’ll enable automatic scaling on even more scale metrics in future updates. When to use Auto-Scale The following are good criteria for services/apps that will benefit from the use of auto-scale: The service/app can scale horizontally (e.g. it can be duplicated to multiple instances) The service/app load changes over time If your app meets these criteria, then you should look to leverage auto-scale. How to Enable Auto-Scale To enable auto-scale, simply navigate to the Scale tab in the Windows Azure Management Portal for the app/service you wish to enable. Within the scale tab turn the Auto-Scale setting on to either CPU or Queue (for Cloud Services and VMs) to enable Auto-Scale. Then change the instance count and target CPU settings to configure the Auto-Scale ranges you want to maintain. The image below demonstrates how to enable Auto-Scale on a Windows Azure Web-Site. I’ve configured the web-site so that it will run using between 1 and 5 VM instances. The exact # used will depend on the aggregate CPU of the VMs using the 40-70% range I’ve configured below. If the aggregate CPU goes above 70%, then Windows Azure will automatically add new VMs to the pool (up to the maximum of 5 instances I’ve configured it to use). If the aggregate CPU drops below 40% then Windows Azure will automatically start shutting down VMs to save me money: Once you’ve turned auto-scale on, you can return to the Scale tab at any point and select Off to manually set the number of instances. Using the Auto-Scale Preview With today’s update you can now, in just a few minutes, have Windows Azure automatically adjust the number of instances you have running in your apps to keep your service performant at an even better cost. Auto-scale is being released today as a preview feature, and will be free until General Availability. During preview, each subscription is limited to 10 separate auto-scale rules across all of the resources they have (Web sites, Cloud services or Virtual Machines). If you hit the 10 limit, you can disable auto-scale for any resource to enable it for another. Alerts and Notifications Starting today we are now providing the ability to configure threshold based alerts on monitoring metrics. This feature is available for compute services (cloud services, VM, websites and mobiles services). Alerts provide you the ability to get proactively notified of active or impending issues within your application. You can define alert rules for: Virtual machine monitoring metrics that are collected from the host operating system (CPU percentage, network in/out, disk read bytes/sec and disk write bytes/sec) and on monitoring metrics from monitoring web endpoint urls (response time and uptime) that you have configured. Cloud service monitoring metrics that are collected from the host operating system (same as VM), monitoring metrics from the guest VM (from performance counters within the VM) and on monitoring metrics from monitoring web endpoint urls (response time and uptime) that you have configured. For Web Sites and Mobile Services, alerting rules can be configured on monitoring metrics from monitoring endpoint urls (response time and uptime) that you have configured. Creating Alert Rules You can add an alert rule for a monitoring metric by navigating to the Setting -> Alerts tab in the Windows Azure Management Portal. Click on the Add Rule button to create an alert rule. Give the alert rule a name and optionally add a description. Then pick the service which you want to define the alert rule on: The next step in the alert creation wizard will then filter the monitoring metrics based on the service you selected: Once created the rule will show up in your alerts list within the settings tab: The rule above is defined as “not activated” since it hasn’t tripped over the CPU threshold we set. If the CPU on the above machine goes over the limit, though, I’ll get an email notifying me from an Windows Azure Alerts email address ([email protected]). And when I log into the portal and revisit the alerts tab I’ll see it highlighted in red. Clicking it will then enable me to see what is causing it to fail, as well as view the history of when it has happened in the past. Alert Notifications With today’s initial preview you can now easily create alerting rules based on monitoring metrics and get notified on active or impending issues within your application that require attention. During preview, each subscription is limited to 10 alert rules across all of the services that support alert rules. No More Credit Card Requirement for MSDN Subscribers Earlier this month (during TechEd 2013), Windows Azure announced that MSDN users will get Windows Azure Credits every month that they can use for any Windows Azure services they want. You can read details about this in my previous Dev/Test blog post. Today we are making further updates to enable an easier Windows Azure signup for MSDN users. MSDN users will now not be required to provide payment information (e.g. no credit card) during sign-up, so long as they use the service within the included monetary credit for the billing period. For usage beyond the monetary credit, they can enable overages by providing the payment information and remove the spending limit. This enables a super easy, one page sign-up experience for MSDN users. Simply sign-up for your Windows Azure trial using the same Microsoft ID that you use to manage your MSDN account, then complete the one page sign-up form below and you will be able to spend your free monthly MSDN credits (up to $150 each month) on any Windows Azure resource for dev/test: This makes it trivially easy for every MDSN customer to start using Windows Azure today. If you haven’t signed up yet, I definitely recommend checking it out. Summary Today’s release includes a ton of great features that enable you to build even better cloud solutions. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today. Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

SQL SERVER – What is a Technology Evangelist?

- by pinaldave

When you hear that someone is an “evangelist” the first thing that might pop into your mind is the Christian church. In fact, the term did come from Christianity, and basically means someone who spreads the news about their faith. In the technology world, the same definition is true. Technology evangelists are individuals who, professionally or in their spare time, spread the news about the latest new products. Sounds like a salesperson, right? No they are absolutely different. Salespeople also keep up to date with a large number of people, and like to convince others to buy their product – and some will go to any lengths to sell! An evangelist, on the other hand, is brutally honest about the product, even if sometimes it means not making a sale. An evangelist is out there to tell the TRUTH. A salesperson needs to make sales. An Evangelist offers a Solution independent of Technology used – a Salesperson offers Particular Technology. With this definition in mind, you can probably think of a few technology evangelists you already know. Maybe it’s a relative or a neighbor, someone who loves keeping up with the latest trends and is always willing to tell you about them if you ask even the simplest question. And, in fact, they probably are evangelists and don’t even know it. For a long time, the work of technology evangelism was in the hands of community and community technology leaders. Luckily now various organizations have understood the importance of the community and helping community to reach their goals. This has lead them to create role of “Technology Evangelists”. Let me talk about one of the most famous Evangelist of the SQL Server technology. Technology Evangelist only belongs to technology and above any country, race, location or any other thing. They are dedicated to the technology. Vinod Kumar is such a man, who have given a lot to community. For years he was a Technology Evangelist for Microsoft, and maintained a blog that was dedicated to spreading his enthusiasm for his favorite products. He is one of the most respected Evangelists in the field, and has done a lot of work to define the job for other professionals. Vinod’s career has since progressed to the Microsoft Technology Center (read his post), but he is continuing to be a strong presence in the evangelism community. I have a lot of respect for Vinod. He has done a lot for the community and technology evangelism. Everybody has dream to serve community the way he does, and he is a great role model for evangelists everywhere. On his blog, Vinod created one of the best descriptions of a Technology Evangelist. It defined the position and also made the distinction between evangelist and salesperson extremely clear. I will include the highlights of that list here, because no one can say it better than Vinod: Bundle of energy – Passion is their middle name Wonderful Story tellers Empathy, Trust, Loyalty, Openness, Accessibility and Warmth Technology Enthusiast – Doers Love people, people and more people – Community oriented Unique Style and Leadership qualities !!! Self-Confident, Self-Motivated but a student (To read the full list, see: Evangelism Beyond Borders with Evangelists) His blog is a must-read for anyone interested in technology evangelism as a career or simply a hobby. His advice about how to gain an audience and become a trusted advisor is the best in the business. I think there is an evangelist in everyone. I, too, consider myself a technology evangelist. Regular readers of this blog will recognize that I am dedicated to bringing information to the masses, and that I pride myself on being both brutally and honest and giving every product fair consideration. I think there is no better way of saying following subject. “Once an Evangelist – Always an Evangelist!” Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Database, MVP, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Evangelist

Read the article

Software development stack 2012

A couple of months ago, I posted on Google+ about my evaluation period for a new software development stack in general. "Analysing existing 'jungle' of multiple applications and tools in various languages for clarification and future design decisions. Great fun and lots of headaches... #DevelopersLife" Surprisingly, there was response... ;-) - And this series of articles is initiated by this post. Thanks Olaf. The past few years... Well, after all my first choice of software development in the past was Microsoft Visual FoxPro 6.0 - 9.0 in combination with Microsoft SQL Server 2000 - 2008 and Crystal Reports 9.x - XI. Honestly, it is my main working environment due to exisiting maintenance and support plans with my customers, but also for new project requests. And... hands on, it is still my first choice for data manipulation and migration options. But the earth is spinning, and as a software craftsman one has to be flexible with the choice of tools. In parallel to my knowledge and expertise in the above mentioned tools, I already started very early to get my hands dirty with the Microsoft .NET Framework. If I remember correctly, I started back in 2002/2003 with the first version ever. But this was more out of curiousity. During the years this kind of development got more serious and demanding, and I focused myself on interop and integrational libraries and applications. Mainly, to expose exisitng features of the .NET Framework to Visual FoxPro - I even had a session about that at the German Developer's Conference in Frankfurt. Observation of recent developments With the recent hype on Javascript and HTML5, especially for Windows 8 and Windows Phone 8 development, I had several 'Deja vu' events... Back in early 2006 (roughly) I had a conversation on the future of Web and Desktop development with my former colleagues Golo Roden and Thomas Wilting about the underestimation of Javascript and its root as a prototype-based, dynamic, full-featured programming language. During this talk with them I took the Mozilla applications, namely Firefox and Thunderbird, as a reference which are mainly based on XML, CSS, Javascript and images - besides the core rendering engine. And that it is very simple to write your own extensions for the Gecko rendering engine. Looking at the Windows Vista Sidebar widgets, just underlines this kind of usage. So, yes the 'Modern UI' of Windows 8 based on HTML5, CSS3 and Javascript didn't come as any surprise to me. Just allow me to ask why did it take so long for Microsoft to come up with this step? A new set of tools Ok, coming from web development in HTML 4, CSS and Javascript prior to Visual FoxPro, I am partly going back to that combination of technologies. What is the other part of the software development stack here at IOS Indian Ocean Software Ltd? Frankly, it is easy and straight forward to describe: Microsoft Visual FoxPro 9.0 SP 2 - still going strong! Visual Studio 2012 (C# on latest .NET Framework) MonoDevelop Telerik DevCraft Suite WPF ASP.NET MVC Windows 8 Kendo UI OpenAccess ORM Reporting JustCode CODE Framework by EPS Software MonoTouch and Mono for Android Subversion and additional tools for the daily routine: Notepad++, JustCode, SQL Compare, DiffMerge, VMware, etc. Following the principles of Clean Code Developer and the Agile Manifesto Actually, nothing special about this combination but rather a solid fundament to work with and create line of business applications for customers.Honestly, I am really interested in your choice of 'weapons' for software development, and hopefully there might be some nice conversations in the comment section. Over the next coming days/weeks I'm going to describe a little bit more in detail about the reasons for my decision. Articles will be added bit by bit here as reference, too. Please bear with me... Regards, JoKi

Read the article

Java Script – Content delivery networks (CDN) can bit you in the butt.

- by Ryan Ternier

As much as I love the new CDN’s that Google, Microsoft and a few others have publically released, there are some strong gotchas that could come up and bite you in the ass if you’re not careful. But before we jump into that, for those that are not 100% sure what a CDN is (besides Canadian). Content Delivery Network. A way of distributing your static content across various servers in different physical locations. Because this static content is stored on many servers around the world, whenever a user needs to access this content, they are given the closest server to their location for this data. Already you can probably see the immediate bonuses to a system like this: Lower bandwidth Even small script files downloaded thousands of times will start to take a noticeable hit on your bandwidth meter. Less connections/hits to your web server which gives better latency If you manage many servers, you don’t need to manually update each server with scripts. A user will download a script for each website they visit. If a user is redirected to many domains/sub-domains within your web site, they might download many copies of the same file. When a system sees multiple requests from the same domain, they will ignore the download Those are just a handful of the many bonuses a CDN will give you. And for the average website, a CDN is great choice. Check out the following CDN links for their solutions: Google AJAX Library: http://code.google.com/apis/ajaxlibs/ Microsoft Ajax library: http://www.asp.net/ajaxlibrary/cdn.ashx The Gotcha There is always a catch. Here are some issues I found with using CDN’s that hopefully can help you make your decision. HTTP / HTTPS If you are running a website behind SSL, make sure that when you reference your CDN data that you use https:// vs. http://. If you forget this users will get a very nice message telling them that their secure connection is trying to access unsecure data. For a developer this is fairly simple, but general users will get a bit anxious when seeing this. Trusted Sites Internet Explorer has this really nifty feature that allows users to specify what sites they trust, and by some defaults IE7 only allows trusted sites to be viewed. No problem, they set your website as trusted. But what about your CDN? If a user sets your websites to trusted, but not the CDN, they will not download those static files. This has the potential to totally break your web site. Pedantic Network Admins This alone is sometimes the killer of projects. However, always be careful when you are going to use a CDN for a professional project. If a network / security admin sees that you’re referencing an outside source, or that a call from a website might hit an outside domain.. panties will be bunched, emails will be spewed out and well, no one wants that.

Read the article

Major Analyst Report Chooses Oracle As An ECM Leader

- by brian.dirking(at)oracle.com

Oracle announced that Gartner, Inc. has named Oracle as a Leader in its latest "Magic Quadrant for Enterprise Content Management" in a press release issued this morning. Gartner's Magic Quadrant reports position vendors within a particular quadrant based on their completeness of vision and ability to execute. According to Gartner, "Leaders have the highest combined scores for Ability to Execute and Completeness of Vision. They are doing well and are prepared for the future with a clearly articulated vision. In the context of ECM, they have strong channel partners, presence in multiple regions, consistent financial performance, broad platform support and good customer support. In addition, they dominate in one or more technology or vertical market. Leaders deliver a suite that addresses market demand for direct delivery of the majority of core components, though these are not necessarily owned by them, tightly integrated, unique or best-of-breed in each area. We place more emphasis this year on demonstrated enterprise deployments; integration with other business applications and content repositories; incorporation of Web 2.0 and XML capabilities; and vertical-process and horizontal-solution focus. Leaders should drive market transformation." "To extend content governance and best practices across the enterprise, organizations need an enterprise content management solution that delivers a broad set of functionality and is tightly integrated with business processes," said Andy MacMillan, vice president, Product Management, Oracle. "We believe that Oracle's position as a Leader in this report is recognition of the industry-leading performance, integration and scalability delivered in Oracle Enterprise Content Management Suite 11g." With Oracle Enterprise Content Management Suite 11g, Oracle offers a comprehensive, integrated and high-performance content management solution that helps organizations increase efficiency, reduce costs and improve content security. In the report, Oracle is grouped among the top three vendors for execution, and is the furthest to the right, placing Oracle as the most visionary vendor. This vision stems from Oracle's integration of content management right into key business processes, delivering content in context as people need it. Using a PeopleSoft Accounts Payable user as an example, as an employee processes an invoice, Oracle ECM Suite brings that invoice up on the screen so the processor can verify the content right in the process, improving speed and accuracy. Oracle integrates content into business processes such as Human Resources, Travel and Expense, and others, in the major enterprise applications such as PeopleSoft, JD Edwards, Siebel, and E-Business Suite. As part of Oracle's Enterprise Application Documents strategy, you can see an example of these integrations in this webinar: Managing Customer Documents and Marketing Assets in Siebel. You can also get a white paper of the ROI Embry Riddle achieved using Oracle Content Management integrated with enterprise applications. Embry Riddle moved from a point solution for content management on accounts payable to an infrastructure investment - they are now using Oracle Content Management for accounts payable with Oracle E-Business Suite, and for student on-boarding with PeopleSoft e-Campus. They continue to expand their use of Oracle Content Management to address further use cases from a core infrastructure. Oracle also shows its vision in the ability to deliver content optimized for online channels. Marketers can use Oracle ECM Suite to deliver digital assets and offers as part of an integrated campaign that understands website visitors and ensures that they are given the most pertinent information and offers. Oracle also provides full lifecycle management through its built-in records management. Companies are able to manage the lifecycle of content (both records and non-records) through built-in retention management. And with the integration of Oracle ECM Suite and Sun Storage Archive Manager, content can be routed to the appropriate storage media based upon content type, usage data or other business rules. This ensures that the most accessed content is instantly available, and archived content is stored on a more appropriate medium like tape. You can learn more in this webinar - Oracle Content Management and Sun Tiered Storage. If you are interested in reading more about why Oracle was chosen as a Leader, view the Gartner Magic Quadrant for Enterprise Content Management.

Search Results

Search found 2395 results on 96 pages for 'nathan strong'.

Page 77/96 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84 | Next Page >

- by David

- by Tor Thommesen

- by Alan Cordner

- by nilsi

- by fmz

- by kwek-kwek

- by Lauren

- by BigMad

- by Mariam

- by craigmoliver

- by Kelbizzle

- by jeansymolanza

- by jeansymolanza

- by Brian

- by Varun Chatterji

- by Xetius

- by DigiMortal

- by ScottGu

- by pinaldave

- by Ryan Ternier

- by brian.dirking(at)oracle.com

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84 | Next Page >