Search Results

Search found 18897 results on 756 pages for 'network connectivity'.

Page 77/756 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Vista to Vista network visability issue

  - by Sk93

  Hi All, I've got a Vista Business PC and a Vista Business Laptop connected via a virgin media router (Netgear CG2100D) and I cannot get the two machines to see each other correctly over the network. The laptop is connected via wireless, whilst the pc is wired. Both are set to recieve their network settings automatically (DHCP) and both have the windows firewall (the only firewall on either) turned off completely. I can ping each machine fine from one another using the ip addresses, and I can also connect via \. However, connections via \ fail, and I cannot see the machines in the network map. I have tried turning netBIOS to be "always on" on both adapters, but this makes no difference. I've been messing around pretty much for 6 hours now and am getting quite fustrated by this! (my original aim was to get media sharing working, but I've pretty much abandoned that for now). Any ideas?

  Read the article

• Can I create a virtual network interface to connect to a real network device?

  - by michelemarcon

  I have a networked windows pc with 2 network interfaces. The first connects to a lan with ip address 10.1.. The second connects to another lan with ip address 10.2.. Maybe it's a dumb question, however is it possible to virtualize the second network interface, so that the pc can connect to the 2 lans? If necessary, I may switch to linux or paravirtualization. CLARIFICATION: I want to send DHCP broadcast packets on the second lan, but not on the first lan. I want to do it with one single physical network interface. At the moment, I'm not using any virtualization software.

  Read the article

• Setting up Mac VPN on simple network with separate IPs

  - by Dave

  Hi there, We have a pretty simple network configuration. A typical ASDL line with two extra IP addresses. We have a basic home network router Dlink DIR-655. We have two Mac OS X Snow Leopard Servers that we want to setup VPN on. The problem is that we can't change the ports which VPN works under ie. we can only setup port forwarding for UDP 500,1701,4500 to a single server. I'm wondering how we can cost effectively re-work our network so that we can take advantage of the separate IP addresses and have both VPNs working with the same router. Is that possible with our current hardware setup or do we need something more powerful? We're also toying with Mobile Access and wondering if that might be easier to setup. Expert help is greatly appreciated.

  Read the article

• Several border firewalls in the same network

  - by nimai

  I'm currently analyzing the consequences of multipath connections for the firewalls. In that context, I'm wondering if it's really uncommon to have several firewalls at the borders of a network to protect it. The typical case I'd imagine would be a multihomed network, for which the administrator would have different policies for links from different (or not) ISPs. Or maybe even in an ISP's network. What would be the practical (dis)advantages of such a configuration? Could you provide an example of an existing topology using several border firewalls?

  Read the article

• refresh windows network performance counters in command line

  - by michalv82

  I am testing a USB device connected to a windows PC. When the device is connected then windows has another network interface going through the device. I need to get the bytes transffered for that specific interface, basically I need the data shown in the networking tab in the task manager for my interface adapter. I found this question which helped to get this info: ms windows network activity bytes send and receive in command line However I have a problem when I run multiple tests - each time I disconnect and connect the device there's another line for the interface, like below. In the task manager networking tab I only see one record for my interface but I don't know how I can know from command line which is the lastest and current instance (it's not like the first line or last line is always the current interface, I noticed it's not consistent): wmic path Win32_PerfRawData_Tcpip_NetworkInterface Get Name,PacketsReceivedPerSec,PacketsSentPerSec,BytesReceivedPersec,BytesSentPersec BytesReceivedPersec BytesSentPersec Name PacketsReceivedPersec PacketsSentPersec 422666370 6317989292 Intel[R] 82579LM Gigabit Network Connection 2715169 8109643 49150 375973 My USB Device 432 568 0 0 My USB Device _2 0 0 0 0 My USB Device _3 0 0 0 0 My USB Device _6 0 0 0 0 Local Area Connection* 9 0 0

  Read the article

• Network router and switch configuration

  - by gilly3

  Can I put a switch before my router in my home network? Here is a diagram of how I want to set up my network: ________________________________ ________________________________________ | | | | | Cable Access Panel | | Home Office | | _____________ ________ | | _____________ | | | | | | | | | | _________ | | | Cable Modem |--->| Switch |-------------->| Router |____| | | | |_____________| |________| | | |_____________| | Printer | | |______________________/____\____| | / | \ |_________| | ___/_ _\___ | _____/ ____|____ \_____ | | | | | | | | | | | | | | PC1 | | PC2 | | | PC3 | | Ext. HD | | PC4 | | |_____| |_____| | |_____| |_________| |_____| | |________________________________________| The reason I want to do this is because my router is also my wireless access point. My cable modem is located in the far corner of my home where my phone/tv/network access panel is. I'd rather keep the wireless access point in a more central location, but I'm not sure if DHCP will continue to work properly with that configuration. Edit: I'd like to continue to be able to share files and access my networked drive and printer from each computer in the house.

  Read the article

• Establish direct cable connection between Windows 8 PCs in home network

  - by Marie. P.

  I'm running two PCs, a desktop and a laptop with Windows 8 Release Preview ("Build 8400"). They are connected to the same router in infrastructure mode, thereby having wireless internet. Due to often file synchronization between the machines I want to establish a cable connection that allows direct file transfer, without needing to use the wireless. When I plug in the cable (normal, not cross-over), I see in "Control Panel\Network and Internet\Network Connections": "Ethernet - unidentified Network" on both PCs. Transferring a file between both still only uses the WiFi via the Router. I noticed that when turning off the wifi on one PC, I can set up a shared internet connection that will work via Ethernet-cable, but since sometimes only one PC runs, sometimes the other one, I do not want to have the internet of one machine to be dependent on the other one being switched on. I do not have a crossover-cable, but since I did connect the PCs already successfully (just without both being on the internet), I'm sure that this should also work with a normal ethernet cable.

  Read the article

• Wireshark Not Displaying Packets From Other Network Devices, Even in Promisc Mode

  - by eb80

  System Setup: 1. MacBook running Mountain Lion. 2. Wireshark installed and capturing packets (I have "capture all in promiscuous mode" checked) 3. I filter out all packets with my source and destination IP using the following filter ("ip.dst != 192.168.1.104 && ip.src != 192.168.1.104") 4. On the same network as the MacBook, I use an Android device (connecting via WiFi) to make HTTP requests. Expected Results: 1. Wireshark running on the MacBook sees the HTTP request from the Android device. Actual Results: 1. I only see SSDP broadcasts from 192.168.1.1 Question: What do I need to do so that Wireshark, like Firesheep, can see and use the packets (particularly HTTP) from other network devices on the same network?

  Read the article

• Tunneling over IPv4 network

  - by JoesyXHN

  Hi, Most of the articles I have read about Tunneling. It describes that the tunneling supports for communication between 2 IPv6 networks over (crossing) an Ipv4 network. For example: TUNNEL A (IPv6) ==> INTERNET NETWORK (IPv4) => TUNNEL B (IPv6) Would it be doable for: TUNNEL A (IPv4) ==> INTERNET NETWORK (IPv6) => TUNNEL B (IPv4) Please give me an answer with elaborate explanation. Thanks in advance.

  Read the article

• Accessing VMware Player across the network

  - by Tiffany Walker

  My network: 192.168.2.2 (computer) 255.255.255.0 (mask) 192.168.2.254 (gateway) The VMplayer is: 192.168.233.129 (ip) 255.255.255.0 (mask) 192.168.233.255(bcast) It's obvious the player can't be access from other systems because of the wrong network settings. However, I am not sure as to how to change that. Obviously I have to edit the ifcg-eth0 but I know I also need to edit it on the host system to make it accessably. Is this done from inside VMware Player? Or do I need to edit the network devices? The host box is Windows. Inside VMware is Linux.

  Read the article

• VM's, virtual networks and my home network.

  - by Jason Taylor

  I want to create a small lab of VM's to test out networking with. I have two PC's running VMWare and I need the VM's on these two PC's to be connected to their own LAN. I am planning on bridging the VM's into my home network. My home network and PC's are in the 192.168.0.0 range, but I want my VM's to be in 10.1.0.0. If I do it this way (Bridging the VM's on both hosts into the network) will the VM's be able to communicate? Will my home router freak out seeing two different subnets? Is there another, easier way to connect the virtual lan's on two vmware workstations together?

  Read the article

• Oracle 11g network configuration

  - by Kylo

  Hi, I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

  Read the article

• Block complete network access for one local user

  - by tumchaaditya

  Well, this is quite trivial question but I could not find a satisfactory answer even after trying many search queries both here and on Google. I want to share my PC with my room-mate. And I don't want him to access ANY network(LAN included). So, I can create an account for him and block network access for the same. I would prefer avoiding any third-party tools as far as possible. It's a simple home PC hooked up to a router for internet. No domain and other stuff. (Technically, guest account can achieve this. But somehow, the guest account on my PC has network access!)

  Read the article

• Network Share unavailable after DNS Change

  - by Justin Largey

  Hi, I have a server, called Server1 with various network shares on it. Our users map to this share using \\Server1\FileShareName1. During a DR Test, we rerouted all network traffic from Server1 to Server21. All folder shares are set up on Server21. We were hoping the the network shares would still be accessible using \\Server1\FileNameShare1, unfortunately, they are not. Does anyone know why this is happening? This is a Win2003 Environment, and DNS was flushed. I confirmed that IP addresses are matching between the two servers. Any help or insight is much appreciated.

  Read the article

• I can't use a custom theme on a network account

  - by Rev

  I'm an administrator for the computer I use, but I'm using a network account. I can set custom themes (non-Microsoft, I mean) on my local account but not on the network account. It's the same machine, just different accounts/domains. I tried to repatch the files from the network account, but it says they're already patched. Any ideas why this won't work? The themes don't show up in the Personalize menu, and I can't just double click the .theme file from the Themes folder in Windows 7 Pro. This is the theme I'm trying to use, by the way: http://fediafedia.deviantart.com/art/Windows-8-VS-for-Win7-258514188?q=boost%3Apopular%20windows%208%20theme&qo=0 Tried repatching the files, still nothing.

  Read the article

• Automate Win8 network and sharing settings

  - by RafaelBarriola

  I am trying to create a unattended DVD installation of Windows 8, but I can't seem to find a solution do this. What I'm looking for are to have the same settings on the Network and Sharing Center, to have the Turn on network discovery "on" for both the private and guest/public within the Control Panel. For private and guest/public, I need to: Turn on network discovery Turn on printer and file sharing Turn off public folder sharing Turn on password protected sharing Use user accounts and passwords to connect to other computers I've been searching for days and have not found a solution yet.

  Read the article

• Connect to server in VMWare player while host is not connected to a network

  - by blockcipher

  Hello, I have a linux server VM on my host machine using VMWare player and if I'm on a network, I can connect to the web server on the VM via a web browser. However, I tried to do the same while I was disconnected from a network and I couldn't. The networking is set to Host-only and I did use dhclient/ifconfig to make sure that yes, I did have an IP address assigned to the VM. While I can work around this, the purpose of the VM is to allow us to demo our app from any machine and that machine may not be connected to a network. Thanks.

  Read the article

• Connecting via url to a server that is on the same network as me

  - by Axehead

  Good day, I'm having problems with the ftp server I've just set up. I've already managed to configure my modem and wireless router to open up port 21 and setup ftp in my server. But It seems that when I try to connect to it when I'm in the same network as the server via URL, (ftp://mydomain.com) it redirects me to the modem's web interface. But then when I try to connect to it outside the network using a different internet connection. It succeeds. It also succeeds when I'm in the same network and I go to ftp://192.168.., the server's local IP. Am I supposed to adjust something in the modem or router? Or is this a different problem altogether? BTW I'm using Windows Server 2008 r2 as my server's OS and using IIS for ftp.

  Read the article

• WIndows Hosted Network

  - by Nandakumar V

  I have created a hosted network in my windows7 system. The netsh wlan show hostednetwork command gives the output Hosted network settings ----------------------- Mode : Allowed SSID name : "rambo" Max number of clients : 100 Authentication : WPA2-Personal Cipher : CCMP Hosted network status --------------------- Status : Started BSSID : xx:xx:xx:xx:xx:xx Radio type : 802.11n Channel : 11 Number of clients : 1 xx:xx:xx:xx:xx:xx Authenticated But I have forgot the password for this connection and after some googling I found the command netsh wlan refresh hostednetwork YourNewNetworkPassword. But on executing this command it get the error C:\Users\user>netsh wlan refresh hostednetwork rambo123 Invalid value "rambo123" for command option "data". Usage: refresh hostednetwork [data=]key I have no idea what is wrong with this command.

  Read the article

• Correct usage of Windows Server on network?

  - by Hobart Bosworth

  I have two routers, one with dhcp turned on and the other with it off. this is a functioning home network. Now, I am trying to integrate into it a windows server. Should the windows server be doing the dhcp and dns work? And if so, what will this mean for the existing network? Will I need to reconfigure this? I am currently installing server 2003 onto my server machine. It is connected up to the network on the main router with dhcp. Any words of advice?

  Read the article

• Network Service Account not Inherited in ACL

  - by 5lovak

  I have a problem with files that are being moved into a folder that is set to replace permissions on child objects for the Network Service account. The process is that a media file is uploaded to a website, and is encoded by a piece of software. This moves the file to a folder but for some reason the files that get moved there don't inherit the Network Service account in security permissions. If I manually move a file into the folder the permission is inherited. I have used the effective permissions tool to check the Network Service account security permissions on the parent folder but this shows that there is nothing overriding it - the account has full permissions. Can try and supply more info if required, but any answers grealty appreciated!

  Read the article

• Is this one network or two networks?

  - by colemik

  I have this simple question and really don't know the answer. Does the drawing below show one network or two networks? This is a question about the definition of a network from the OSI / TCP/IP model point of view: From one point of view, those are two L2 networks connected with a bridge. From another point of view, this is one L3 network, that can have a common L3 address space (like 10.1.1.0). PS If this question is too dumb, please move it to Superuser.

  Read the article

• Vista Home Premium won't connect to network.

  - by Ice

  I deinstalled some software (e.g. some Toolbars for IE and Norton security suite, because the free trial period of 60 days is run out and so i want to switch to microsofts free security essentials). But now i cannot connect to the network again: Neither over LAN nor over WiFi. Neither with standard DHCP ON (sets a 169.254.x.y address) nor with fixed IP-Address. No error during changing the settings. Ping to the Gateway e.g. doesn't work and gives "generall failure". The DHCP-Client sets no IP-Address. There is allways only 'local access' on every network-connection. i ran out of ideas, please help. UPDATE per 2011-03-11: I followed each and every hint but nothing changed. I did a research on microsofts homepage through all the sites belonging to network but nothing helped. What can i do next?

  Read the article

• Connect a linux server to network and access it from another computer browser

  - by user1732451

  I had a server in a hosting company and I took it home. I need to connect him to a local network (not wifi) and access to the server from another computer in the network via browser, like I did it when it was in the hosting company. I don't have any knowledge in linux, I just know how to type in the command line :) I thinks all the IP configuration of the server is one big mess, because it passed from more then one hosting company to another... I tried a lot of tutorials that I found in the web, but nothing works - mainly because I don't know how to check if I did something wrong. I just need to know how to connect to local network ( D-Link router) and then access the server from another computer browser. thanks update: the server os is: CentOS release 4.8 (Final)

  Read the article

• Trouble Extending Network with Apple Airport Extreme (PC won't connect with Ethernet)

  - by 0x783czar

  So I have an Apple Airport Extreme base station that I use to create a wifi network at my house. But on a separate story from this station i have a PC (running Windows 7) that does not have a wireless card. Luckily, I have another Airport Extreme Base Station, so I figured I'd have my second station "extend" the existing network. I asked Apple if this was possible, which it was, and walked through the setup wizard to extend the network. Then I ran an ethernet cable from the Station to my PC. However the PC refuses to connect to the Internet. It says it can access the network, "Unidentified Network (Limited Connectivity)", but that's it. It tells me that my computer does not have an IP address. I tried running the cable to another computer (my Apple MacBook Pro) and got a similar error. Any thoughts?

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >