Search Results

Search found 20869 results on 835 pages for 'things i hate'.

Page 77/835 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Low FPS in some games, but hardware not fully used

  - by Mario De Schaepmeester

  I just did a little funny experiment in the game/sim "Train Simulator 2013". I normally have good FPS in it (around 30) at full settings. What I did was make a really, really long train so that the calculations the sim needed to make were enormous (the sim is quite realistic, it takes all things into account like speed/acceleration, G-forces, comfort levels, possible wheel slip and many more, and most of those things on each carriage seperately). This resulted in only 14FPS as reported by the game, but it felt more like 8FPS or so. I have a Logitech G15 keyboard which has an LCD, and it allows me to monitor CPU/RAM and video card load on it. The strange thing is, all CPU cores were busy, but the total load was only about 60% maximum at all times. The video card was only on 30% load (possibly an important note, the memory was full, which is however not unusual for the game in question). The RAM had plenty of room and there weren't many operations as it didn't grow or shrink much. I just have the feeling that the game would run smoother if it used more of my hardware power. Why is it not doing so? I had the same in another game, The Elder Scrolls: Morrowind when using more than 100 mods (that all use scripting) and a few high res texture mods, + a full-on graphics improvement program. The engine is very old (2003), and so I thought this might be the cause (not being optimised for multithreading). I had thought of possible causes, like: The operating system doesn't let the games use all the resources. It doesn't make use of multi-threading appropriately. To eliminate the former, I tried a CPU stress tool and that got 100% CPU juice as I let it run, so the OS is not the problem. I gave its thread the "higher" priority though. My actual question In both games, I did things the engine was not really built to do or support. Can those games' framerate be limited cause of their own engine not being able to cope? What is the real reason and more importantly, can I help it? And in any case, could something actually be wrong with my hardware? It's all reasonably new, a couple of months, and I (almost) never experience any other trouble. Modern and much more demanding games work absolutely fine. Specs CPU: AMD Phenom II 965 X4 @ 3.4gHz RAM: 8GB of DDR3 RAM Video: MSI GTX560 (nVidia chip) with 1GB of GDDR5 memory OS: Windows 7 Ultimate 64 bit Nothing overclocked.

  Read the article

• What are those CPU control panel softwares called?

  - by Tim

  My computer is running an AMD Phenom II quad core CPU but it didn't come with the piece of software that I see people have in a lot of youtube videos. The software is kind of like the ATI catalyst control center but for the AMD processor instead. It shows things like current core temperature, clock speed, etc and I am not sure but maybe it also allows the user to make changes to those things from the control center as well. I am having a hard time finding the download for this online, especially since I don't even have the name for it.

  Read the article

• Transformation?

  - by Joe G

  I started working at Oracle in 1997.  Since then, we (and most everyone) have been talking about transforming finance operations....but what does that mean exactly?  From my perspective, I thought it meant eliminate waste and menial tasks and giving your finance team more time to work on more strategic things.  That seems logical and simplistic, but how much progress have finance teams (and their IT departments) really made over the past fifteen years? I have yet to talk to a customer that doesn't have one amusing task that makes me chuckle.  Sometimes they still print hard copies of transactions to "file," or sometimes they print 700 pages of data to "analyze," or sometimes they cut and paste from one or more reports into a spreadsheet.  Upon hearing these things, my first question is always, "Why do you do that?" to which their response is rarely the same.    Sometimes it's related to trust (both the employee and the system).  Sometimes, it's habit-based.  And sometimes it is just impossible to accomplish the end result without some manual effort. I will say that I used to print nearly everything that I needed to review.  Partly, because I liked having the ability to scribble notes on the paper, and partly, because it was uncomfortable to read online.  However, I have changed. Rarely do I print anything anymore.  It's easier for me to read and notate online, and well, I guess I've just changed my habits. So where do you think our resistance to change comes from?  Is it truly deficits in our systems, or is it our own personal resistance to change?  What's your most annoying & untransformed task?

  Read the article

• What is the canonical name for domain names with extra parts?

  - by ConfusedFromIreland

  I am confused about domain names (I think) I call these things, i.e. names you can buy, 'domain names' bbc.co.uk google.com I call these things, i.e. extensions of names 'host names' www.bbc.co.uk mail.yahoo.com arts.mit.edu hello.there.example.com Is this naming scheme correct? Are there official definitions of these? In particular, what are each of the texts between the dots called (i.e. the name for "www", "bbc", "edu", "example")?

  Read the article

• When creating a GUI wizard, should all pages/tabs be of the same size? [closed]

  - by Job

  I understand that some libraries would force me to, but my question is general. If I have a set of buttons at the bottom: Back, Next, Cancel?, (other?), then should their location ever change? If the answer is no, then what do I do about pages with little content? Do I stretch things? Place them in the lone upper left corner? According to Steve Krug, it does not make sense to add anything to GUI that does not need to be there. I understand that there are different approaches to wizards - some have tabs, others do not. Some tabs are lined horizontally at the top; others - vertically on the left. Some do not show pages/tabs, and are simply sequences of dialogs. This is probably a must when the wizard is "non-linear", e.g. some earlier choices can result in branching. Either way the problem is the same - sacrifice on the consistency of the "big picture" (outline of the page/tab + location of buttons), or the consistency of details (some tabs might be somewhat packed; others having very little content). A third choice, I suppose is putting extra effort in the content in order to make sure that organizing the content such that it is more or less evenly distributed from page to page. However, this can be difficult to do (say, when the very first tab contains only a choice of three things, and then branches off from there; there are probably other examples), and hard to maintain this balance if any of the content changes later. Can you recommend a good approach? A link to a relevant good blog post or a chapter of a book is also welcome. Let me know if you have questions.

  Read the article

• formatting a column based on another columns cell TEXT not value in excel

  - by lisa

  I have dates that are running off a formula in that column based on information it is collecting from other worksheets. I have another column that lists text answers based on a different formula that that column is running. It is a customer list that runs with names going down page and multiple columns of information for each client running across page What i want to do is: If column j says "paid" then turn column m - same row - a color or border or something I will repeat this formula for the various things that j can say, just cant figure out how to make conditional formatting read j to change m. To complicate things, in addition to the formula running to collect the date in m, there is also a conditional format set up for m that changes the color of the cells after a certain date. I want to be able to keep that formula, in addition to the one that you are assisting with...i will use highlighting, or something different to avoid any conflicts.

  Read the article

• How do you plan your asynchronous code?

  - by NullOrEmpty

  I created a library that is a invoker for a web service somewhere else. The library exposes asynchronous methods, since web service calls are a good candidate for that matter. At the beginning everything was just fine, I had methods with easy to understand operations in a CRUD fashion, since the library is a kind of repository. But then business logic started to become complex, and some of the procedures involves the chaining of many of these asynchronous operations, sometimes with different paths depending on the result value, etc.. etc.. Suddenly, everything is very messy, to stop the execution in a break point it is not very helpful, to find out what is going on or where in the process timeline have you stopped become a pain... Development becomes less quick, less agile, and to catch those bugs that happens once in a 1000 times becomes a hell. From the technical point, a repository that exposes asynchronous methods looked like a good idea, because some persistence layers could have delays, and you can use the async approach to do the most of your hardware. But from the functional point of view, things became very complex, and considering those procedures where a dozen of different calls were needed... I don't know the real value of the improvement. After read about TPL for a while, it looked like a good idea for managing tasks, but in the moment you have to combine them and start to reuse existing functionality, things become very messy. I have had a good experience using it for very concrete scenarios, but bad experience using them broadly. How do you work asynchronously? Do you use it always? Or just for long running processes? Thanks.

  Read the article

• Possible causes for Domain server being unavailable?

  - by serversurfer

  One of our servers was compromised after a user with administrative privileges accidentally loaded a virus from a USB drive on a desktop connected to the domain. The two most obvious symptoms of this were: The server is no longer responding to login attempts The root directory of the drive containing user data has been filled with randomly named empty folders. (Initially it was around a million folders, I've been slowly deleting them.) I've run several virus scans from different vendors and am fairly confident the virus has been removed but the damage is done. I'm hoping the two symptoms are related and that once the directories are gone the server will start responding again. The drive is very slow to respond. I'm deleting about 20k folders at a time. Anymore than that and windows explorer becomes unresponsive. In the event that I finish cleaning up the HD and things don't return to normal what other things can I check?

  Read the article

• How do I implement deceleration for the player character?

  - by tesselode

  Using delta time with addition and subtraction is easy. player.speed += 100 * dt However, multiplication and division complicate things a bit. For example, let's say I want the player to double his speed every second. player.speed = player.speed * 2 * dt I can't do this because it'll slow down the player (unless delta time is really high). Division is the same way, except it'll speed things way up. How can I handle multiplication and division with delta time? Edit: it looks like my question has confused everyone. I really just wanted to be able to implement deceleration without this horrible mass of code: else if speed > 0 then speed = speed - 20 * dt if speed < 0 then speed = 0 end end if speed < 0 then speed = speed + 20 * dt if speed > 0 then speed = 0 end end end Because that's way bigger than it needs to be. So far a better solution seems to be: speed = speed - speed * whatever_number * dt

  Read the article

• Migrating Magento Concern

  - by Pankaj Upadhyay

  We have a Magento 1.5.0.1 store running at a hosting provider. Now, we need to migrate the same from that server to a new hosting provider. I had talk with a technical guy from the new hosting provider who told me to do following things. Go into the cPanel Backup Wizard . Make a FULL BACKUP and download the zip file Then upload that zip file on their server in my root folder. Then tell them and they will do the restore. My Concern :- Will everything work as expected. What about the connectionstrings and database and all. Will database be automatically created and work the same. Also, somewhere I read that ver 1.5.0.1 used older type of database which might not work on new MySQLs. Can this too have any impact. Should i proceed in the same manner or I need to take care of some additional things to ensure smooth running.

  Read the article

• How do I find the correct Modeline to connect my computer to my Televsion

  - by Mikelane

  I've been trying to hook up a Ubuntu computer with my Panasonic TH-42PA60A Plasma television for weeks now. My original question was asked here, which includes all the specifications about the Television in detail and how I've connected the computer to the televsion. So far, I've tried hooking up three other computers; 2 Ubuntu computers with fairly new graphic cards, and a Windows XP computer. None of them have been able to display an image on the television. The closest I've come to getting a picture up is with my small laptop running Ubuntu, however the image came out all purple and distorted. I had gotten the image by adding extra modes via the xrandr command, using a process similar to described here. I realize it might be possible to get this working if I had the correct modeline. I've checked the Modeline database, but the Panasonic TH-42PA60A is not listed. How can I find the correct modeline for my television. What commands can I use? I've read that there may be a danger of damaging my TV when doing things like this. What things should I avoid to prevent damaging my television?

  Read the article

• REST API wrapper - class design for 'lite' object responses

  - by sasfrog

  I am writing a class library to serve as a managed .NET wrapper over a REST API. I'm very new to OOP, and this task is an ideal opportunity for me to learn some OOP concepts in a real-life situation that makes sense to me. Some of the key resources/objects that the API returns are returned with different levels of detail depending on whether the request is for a single instance, a list, or part of a "search all resources" response. This is obviously a good design for the REST API itself, so that full objects aren't returned (thus increasing the size of the response and therefore the time taken to respond) unless they're needed. So, to be clear: .../car/1234.json returns the full Car object for 1234, all its properties like colour, make, model, year, engine_size, etc. Let's call this full. .../cars.json returns a list of Car objects, but only with a subset of the properties returned by .../car/1234.json. Let's call this lite. ...search.json returns, among other things, a list of car objects, but with minimal properties (only ID, make and model). Let's call this lite-lite. I want to know what the pros and cons of each of the following possible designs are, and whether there is a better design that I haven't covered: Create a Car class that models the lite-lite properties, and then have each of the more detailed responses inherit and extend this class. Create separate CarFull, CarLite and CarLiteLite classes corresponding to each of the responses. Create a single Car class that contains (nullable?) properties for the full response, and create constructors for each of the responses which populate it to the extent possible (and maybe include a property that returns the response type from which the instance was created). I expect among other things there will be use cases for consumers of the wrapper where they will want to iterate through lists of Cars, regardless of which response type they were created from, such that the three response types can contribute to the same list. Happy to be pointed to good resources on this sort of thing, and/or even told the name of the concept I'm describing so I can better target my research.

  Read the article

• Additional Hard Drives for Servers

  - by Abs

  Hello all, I am developing a web app where I will have to save lots of files and I am just trying to work out the directory structure and where things should be saved to. I have had a look at the dedicated server I want to buy and for storage it shows this: 2x 1TB SATA in RAID1 The space is enough but I am guessing this will not be on one hard drive? I will have to save files on one hard drive and when that fills up, I have to use the other? For the Fedora distro - what is the path for the second drive? Is there a primary drive where I will be able to setup my webroot? I am sorry, this is all new to me. It would be great to links and advice on how things actually work when it comes to additional hard drives etc. Thanks all

  Read the article

• Draw "vision cone" / targetting element onto game world

  - by gkimsey

  I'm wanting to indicate various things using a "pie slice" sort of shape as below. Similar to vision cones in stealth game minimaps, or targetting indicators in RTS type games for frontal area attacks. Something generic enough to be used for both would be ideal. I need to be able to procedurally (and efficiently) change things like the slice width and length, color, transparency, position in the world, etc. For my particular situation, there's no concern with elevation, funky terrain, or really any third axis at all as far as this element is concerned. I have two first inclinations on how to accomplish this: 1) Manually generate the vertices for a main triangle, (possibly two, superimposed to get the border effect), a handful more to approximate the arc at the end, and roll it into a mesh. 2) Use some sort of 2D drawing library to create a circle and mask it off at the right angles, render to texture, and use that. For reference, I have some experience with Ogre3D, but I'm not attached to it as this is a mostly academic pursuit at the moment. Other technologies that might be better at accomplishing this are more than welcome. Finally, I'm kind of curious about how to do a "flashlight" or similar 3D effect that could produce the same result, but on all surfaces in the lit area.

  Read the article

• Raid 5 scsi fault

  - by HaLaBi

  I have no much knowledge about servers and I was looking all day around the internet about finding a solution to my raid 5 problem. All of a sudden two disks failed. The server won't boot (HP Proliant, windows 2003 R2, very old maybe 10 years old). I know that if one disk is faulty then I can add a new disk and rebuild it and things will be fine, the problem is two went faulty :( is this normal? two at the same time? is there any other thing I can do and I am not aware of? other than taking them out and reinserting them back? Windows won't boot. The Array menu shows that disks 0 and 4 are "Missing". Any other tricks or things to do? It is important because for some unknown reason the back up job did not work for a month and I just found out, so I need to make these raid 5 back online again.

  Read the article

• What is the easiest way to apply database functionality into my daily life?

  - by Daddy Warbox

  let me try to explain it by listing some of the things I want to do: Submit random thoughts, notes, facts, and to-do tasks of any sort and at any time. Tag each of these submissions freely. Manage these tags centrally. Associate meta-data with submissions and tags. Search, filter, and sort submissions. I want lots of power here. Display views of submissions (including within searches) in a hierarchy. Create said hierarchies easily out by ordering relevant tags. I'm thinking towards some kind of desktop program that allows me to quickly do all of these things. A web service could also work, too, but it will need offline capabilities. I don't want to have to pay for this, if that's possible. Also, as I know regex and SQL, I wouldn't mind solutions involving the use of either.

  Read the article

• Question about modeling with MVC (the pattern, not the MS stuff / non web)

  - by paul

  I'm working on an application in which I'm looking to employ the MVC pattern, but I've come up against a design decision point I could use some help with. My application is going to deal with the design of state-machines. Currently the MVC model holds information about the machine's states, inputs, outputs, etc. The view is going to show a diagram for the machine, graphically allowing the user to add new states, establish transitions, and put the states in a pleasing arrangement, among other things. I would like to store part of the diagram's state (e.g. the x and y state positions) when the machine information is stored for later retrieval, and am wondering how best to go about structuring the model(s?) for this. It seems like this UI information is more closely related to the view than to the state-machine model, so I was thinking that a secondary model might be in order, but I am reluctant to pursue this route because of the added complexity. Adding this information to the current model doesn't seem the right way to go about it either. This is the my first time using the MVC pattern so I'm still figuring things out. Any input would be appreciated.

  Read the article

• Book / software to learn ERP?

  - by user22311

  For a while I've been wanting to learn ERP. What I would like to do is set up a system, and then practice running a business doing things like generating invoices, raising purchase orders, producing monthly accounts, keeping track of fixed assets etc. Then look at enhancing the system further by adding custom code. I know there are a variety of open source ERP systems around, but really I would prefer a widely used commercial system as having familiarity with such a system would be more marketable. So are there any such systems that have a free developer version available? I've looked around, but I've had trouble finding such a system. Also I would like to find a good book or more likely books to read on ERP. Ideally I would be able to get an indepth explanation ERP from a business perspective, ie the accounting operations it supports, how to do all the regular accounting tasks, configuration, business operations best practices, accounting controls and so on. In addition I would like an IT perspective, ie setting up the system, developing forms and reports. Unfortunately the few books I've looked at have been really superficial and totally inadequate. They either fall into the beginning programmer camp, where they use the programming tools but concentrate on programming 101 topics like loops, flow control etc. Or they cover setting up the system with lots of screen shots, but little substance as to why things should be done a certain way. I have a programming background but no real experience in implementing ERP systems. Also I have a reasonable accounting knowledge, and have used ERP systems in various jobs, but only to a very limited degree. So are there any ERP experts who can point me in the right direction? Thanks.

  Read the article

• how to properly edit hosts, hostname and resolf.conf? [migrated]

  - by Firewall

  i,v been searching the internet for a real noop tutorial on the subject but could not found any direct info. on how to edit these files the proper way. i,v got a debian internet server that i use to host some personal domains and runs squid and rTorrent. the server is up and running with no problems but i am confused about a few things. lets say that i named my server (foo), my domain is (example.com) and my public IP is 95.211.133.200 now: should /etc/hostname contains: tango.example.com or tango <----- just the server name should /etc/hosts contains: 127.0.0.1 localhost.localdomain localhost 95.211.133.200 foo.example.com foo should /etc/resolf.conf contains (along with the nameservers) both: domain example.com search example.com or just the first one. are there any other files that i should edit in order to make things right? last thing, the command: domainname returns: (none) i believe it should return (example.com). what should i do to correct that?

  Read the article

• Solutions for "Maintenance Mode"

  - by Ka Lyse

  Given a web application running across 10+ servers, what techniques have you put in place for doing things like altering the state of your website so that you can implement certain features. For instance, you might want to: Restrict Logins/Disable Certain Features Turn Site to "Read Only" Turn Site to Single "Maintenance Mode" page. Doing any of the above is pretty trivial. You can throw a particular "flag" in an .ini file, or add a row/value to a site_options table in your database and just read that value and do the appropriate thing. But these solutions have their problems. Disadvantages/Problems For instance, if you use a file for your application, and you want to switch off a certain feature temporarily, then you need to update this file on all servers. So then you might want to look at running something like ZooKeeper, but you are probably overcomplicating things. So then, you might decide that you want to store these "feature" flags in a database. But then you are obviously adding unncessary queries to each page request. So you think to yourself, that you will throw memcached in to the mix and just cache the query. Then you just retrieve all of your "Features" from memcached and add a 2ms~ latency to your application on every page. So to get around this, you decide to use a two tier-cache system, whereby you use an inmemory cache on each machine, (like Apc/Redis etc). This would work, but then it gets complicated, because you would have to set the key/hash life to perhaps 60 seconds, so that when you purge/invalidate the memcached object storing your "Features" result, your on machine cache is prompt enough to get the the new states. What suggestions might you have? Keeping in mind that optimization/efficiency is the priority here.

  Read the article

• What helped YOU learn C++? [on hold]

  - by Tips48

  So here's my attempt to not get this question closed for too subjective :P I'm a young programmer, specifically interested in Game Development. I've written my first couple games in Java, which I would consider my self intermediate-Advanced in. As I start to prepare myself for college and (hopefully) internships, I've noticed that learning C/C++ is essential to the industry. I've decided to start with C++, and so I read a couple of books that I saw were suggested. Anyway, now I have a decent understanding of the basics, but I really want to enhance my language knowledge. Instead of just asking for things to do, I was wondering what were some exercises that you did that really helped you understand the language? Preferably they would be near the beginner level. I understand that they obviously won't be directly related to Game Development, but it be nice if there were some things that I could transfer over eventually. (Specifically, I struggle with memory (pointers, etc) since there is no such concept in Java) Thanks! - Tips P.S.: Here's to hoping this isn't to subjective :P

  Read the article

• Features and components used in Google Chrome taken from Firefox

  - by tobylane

  20 Things I Learned About Browsers and the Web says, in the following passage, that Chrome has taken things from Firefox: Open-source software plays a big role in many parts of the web, including today’s web browsers. The release of the open-source browser Mozilla Firefox paved the way for many exciting new browser innovations. Google Chrome was built with some components from Mozilla Firefox and with the open-source rendering engine WebKit, among others. In the same spirit, the code for Chrome was made open source so that the global web community could use Chrome’s innovations in their own products, or even improve on the original Chrome source code. Does anyone know what those components are?

  Read the article

• how to properly edit hosts, hostname and resolf.conf?

  - by Firewall

  i,v been searching the internet for a real noop tutorial on the subject but could not found any direct info. on how to edit these files the proper way. i,v got a debian internet server that i use to host some personal domains and runs squid and rTorrent. the server is up and running with no problems but i am confused about a few things. lets say that i named my server (foo), my domain is (example.com) and my public IP is 95.211.133.200 now: should /etc/hostname contains: tango.example.com or tango <----- just the server name should /etc/hosts contains: 127.0.0.1 localhost.localdomain localhost 95.211.133.200 foo.example.com foo should /etc/resolf.conf contains (along with the nameservers) both: domain example.com search example.com or just the first one. are there any other files that i should edit in order to make things right? last thing, the command: domainname returns: (none) i believe it should return (example.com). what should i do to correct that?

  Read the article

• Drive reporting incorrect free space

  - by Oli

  So I swapped my shiny SATA SSD for an even shinier PCI-E SSD. I run my core OS on the SSD because it's silly-fast. I did this on my old SSD so I created a new EXT4 partition and then just dded the data across (sorry I don't know the exact command I ran anymore) and after reinstalling grub, I booted onto the PCI-E SSD. At first glance everything had worked perfectly and things were running faster than ever. But then I noticed the free disk space on the new, larger drive: it was almost exactly the same as it was on the other disk... A disk that was half its size. So it looks as if I've copied the files across incorrectly and it's copied some of the filesystem metadata along with it. Tools like du and Disk Usage Analyzer come back with the correct figures. Things that look at the partition (and not the files) seem to think the drive is 120GB I've been using this drive for a week now so it's way out of sync with the old SSD so dumping the data and starting again isn't a job that fills me with joy but two questions: Is there a way to fix my filesystem so it knows what it's really on about? fsck e2fsck and badblocks all seem to be able to scan it without finding a problem with it. If I do plug my old SSD back in, copy the data off my PCI-E on to it and then copy it back onto a fresh filesystem (eg juggle the data around), what's the best way of doing that? I obviously want to keep all the permissions and softlinks where they are.

  Read the article

• A Service specific error occured:1 on trying to start apache 2.0 server.(Windows 7)

  - by user2297366

  I installed apache on my computer(localhost) and it worked fine. Then I went to download some other stuff and later noticed that the apache server stopped. So I went to command prompt(as administrator) and typed net start apache2. It says The Apache2 Service is starting. But before it finishes, I get the error A Service Specific Error Occurred: 1. It says that you can type in something for more info, but that doesn't help at all. Things I have tried: 1: Quit Google Drive Sync 2: Quit any and all programs using port 80(port my server is on) 3. I even tried changing the port of the server and got same error message, so I don't think it has anything to do with something else being in the port. None of those things have worked. I am confused at why it worked earlier, but now it won't work. Any help is greatly appreciated.

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >