Search Results

Search found 5157 results on 207 pages for 'checking'.

Page 78/207 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• Duplicate IP address detection with multiple NICs

  - by sfink

  I am using arping -D to detect duplicate IP addresses within a network when setting up servers. (The network is controlled by someone else, and we have had many issues with IP allocation in the past.) It works fine as long as my host has a single NIC on a given VLAN, but when my host has more than one (I have one with 9 NICs on one VLAN and 1 on the other), arping -D always returns false collisions. The problem is that all 9 of my NICs respond to an ARP request for any of the IPs on those NICs. (These are real physical NICs, not aliases or anything.) I send out one ARP request packet, and get 9 ARP is-at ARP replies, one for each MAC address. I could implement my own solution by sniffing packets and checking for any replies with a MAC address other than the local NICs', but it seems like there ought to be an easier way.

  Read the article

• Flash Media Server 3.5 Installation Problem.

  - by prateeksaluja20

  Hello Experts, I installed Flash media server 3.5 in windows 7 home basic.it installed properly. When i try to open the media server,and not showing in its FMS ADMIN CONSOLE there. I have beeen checking the windows services, it shows flash media server is running.i have installed FMS in Default port (1935,1111).i have MCAFEE Antivirus.1st time it blocks the My FMs then i Allowed it & after that there is no issue.i am not getting what is the problem,is anything blocking the FMS.Even I am not able to start/see the control panel of FMS (Flash media server). I am guessing it is a port problem,Is it or any firewall issue?Please Suggest.

  Read the article

• Windows Update can't install Windows Vista SP1

  - by Harry Johnston

  If you install Windows Vista RTM and run Windows Update, many updates are offered and will successfully install. Once all other updates are installed, Windows Vista service pack 1 is offered. When you attempt to install Windows Vista service pack 1, the service pack installation wizard appears, presenting the license agreement and so on. However, shortly after the installation starts the wizard disappears. Windows Update says that the update was installed successfully. However, service pack 1 is not in fact installed, and will be detected as needed again on the next update check. Repeat ad nauseum. On checking the Windows Update log, error 0x80190194 appears near the beginning of an update check, associated with the URL http://update.microsoft.com/vista/windowsupdate/redir/vistawuredir.cab. Why won't service pack 1 install properly and how do I fix it?

  Read the article

• Configure PERL DBI and DBD in Linux

  - by Balualways

  I am new to Perl and I work in a Linux OEL 5x server. I am trying to configure the Perl DB modules for Oracle connectivity (DBD and DBI modules). Can anyone help me out in the installation procedure? I had tried CPAN didn't really worked out. Any help would be appreciated. I am not quite sure I need to initialize any variables other than $LD_LIBRARY_PATH and $ORACLE_HOME These are my observations: ISSUE:: I am getting the following issue while using the DBI module to connect to Oracle: install_driver(Oracle) failed: Can't locate loadable object for module DBD::Oracle in @INC (@INC contains: /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/5.8.8 .) at (eval 3) line 3 Compilation failed in require at (eval 3) line 3. Perhaps a module that DBD::Oracle requires hasn't been fully installed at connectdb.pl line 57 I had installed the DBD for oracle from /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/DBD/DBD-Oracle-1.50 Could you please take a look into the steps and correct me if I am wrong: Observations: $ echo $LD_LIBRARY_PATH /opt/CA/UnicenterAutoSysJM/autosys/lib:/opt/CA/SharedComponents/Csam/SockAdapter/lib:/opt/CA/SharedComponents/ETPKI/lib:/opt/CA/CAlib $ echo $ORACLE_HOME /usr/local/oracle/ORA This is how I tried to install the DBD module: Download the file DBD 1.50 for Oracle Copy to /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/DBD Untar and Makefile.PL . Message: Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/ Configuring DBD::Oracle for perl 5.008008 on linux (x86_64-linux-thread-multi) Remember to actually *READ* the README file! Especially if you have any problems. Installing on a linux, Ver#2.6 Using Oracle in /opt/oracle/product/10.2 DEFINE _SQLPLUS_RELEASE = "1002000400" (CHAR) Oracle version 10.2.0.4 (10.2) Found /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Found /opt/oracle/product/10.2/rdbms/demo/demo_rdbms64.mk Found /opt/oracle/product/10.2/rdbms/lib/ins_rdbms.mk Using /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Your LD_LIBRARY_PATH env var is set to '/usr/local/oracle/ORA/lib:/usr/dt/lib:/usr/openwin/lib:/usr/local/oracle/ORA/ows/cartx/wodbc/1.0/util/lib:/usr/local/oracle/ORA/lib:/usr/local/sybase/OCS-12_0/lib:/usr/local/sybase/lib:/home/oracle/jdbc/jdbcoci73/lib:./' WARNING: Your LD_LIBRARY_PATH env var doesn't include '/opt/oracle/product/10.2/lib' but probably needs to. Reading /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Reading /usr/local/oracle/ORA/rdbms/lib/env_rdbms.mk Attempting to discover Oracle OCI build rules sh: make: command not found by executing: [make -f /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk build ECHODO=echo ECHO=echo GENCLNTSH='echo genclntsh' CC=true OPTIMIZE= CCFLAGS= EXE=DBD_ORA_EXE OBJS=DBD_ORA_OBJ.o] WARNING: Oracle build rule discovery failed (32512) Add path to make command into your PATH environment variable. Oracle oci build prolog: [sh: make: command not found] Oracle oci build command: [] WARNING: Unable to interpret Oracle build commands from /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk. (Will continue by using fallback approach.) Please report this to [email protected]. See README for what to include. Found header files in /opt/oracle/product/10.2/rdbms/public. client_version=10.2 DEFINE= -Wall -Wno-comment -DUTF8_SUPPORT -DORA_OCI_VERSION=\"10.2.0.4\" -DORA_OCI_102 Checking for functioning wait.ph System: perl5.008008 linux ca-build9.us.oracle.com 2.6.20-1.3002.fc6xen #1 smp thu apr 30 18:08:39 pdt 2009 x86_64 x86_64 x86_64 gnulinux Compiler: gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm Linker: not found Sysliblist: -ldl -lm -lpthread -lnsl -lirc Oracle makefiles would have used these definitions but we override them: CC: cc CFLAGS: $(GFLAG) $(OPTIMIZE) $(CDEBUG) $(CCFLAGS) $(PFLAGS)\ $(SHARED_CFLAG) $(USRFLAGS) [$(GFLAG) -O3 $(CDEBUG) -m32 $(TRIGRAPHS_CCFLAGS) -fPIC -I/usr/local/oracle/ORA/rdbms/demo -I/usr/local/oracle/ORA/rdbms/public -I/usr/local/oracle/ORA/plsql/public -I/usr/local/oracle/ORA/network/public -DLINUX -D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_LARGEFILE_SOURCE=1 -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -fno-strict-aliasing $(LPFLAGS) $(USRFLAGS)] build: $(CC) $(ORALIBPATH) -o $(EXE) $(OBJS) $(OCISHAREDLIBS) [ cc -L$(LIBHOME) -L/usr/local/oracle/ORA/rdbms/lib/ -o $(EXE) $(OBJS) -lclntsh $(EXPDLIBS) $(EXOSLIBS) -ldl -lm -lpthread -lnsl -lirc -ldl -lm $(USRLIBS) -lpthread] LDFLAGS: $(LDFLAGS32) [-m32 -o $@ -L/usr/local/oracle/ORA/rdbms//lib32/ -L/usr/local/oracle/ORA/lib32/ -L/usr/local/oracle/ORA/lib32/stubs/] Linking with /usr/local/oracle/ORA/rdbms/lib/defopt.o -lclntsh -ldl -lm -lpthread -lnsl -lirc -ldl -lm -lpthread [from $(DEF_OPT) $(OCISHAREDLIBS)] Checking if your kit is complete... Looks good LD_RUN_PATH=/usr/local/oracle/ORA/lib Using DBD::Oracle 1.50. Using DBD::Oracle 1.50. Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/ Writing Makefile for DBD::Oracle Writing MYMETA.yml and MYMETA.json *** If you have problems... read all the log printed above, and the README and README.help.txt files. (Of course, you have read README by now anyway, haven't you?)

  Read the article

• Is this normal? Multiple httpd process

  - by ilcreatore

  I'm testing a new Server. This isnt really a peak time for my server (2pm), but still its running a bit slow, I was checking the ESTABLISHED connections using the following command: # netstat -ntu | grep :80 | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n http://i.stack.imgur.com/cZuvP.jpg My MaxClients are set to 50. So as you can see on the picture, only 10 people are eating most of my ram. I got a server with 4GB Ram (2.7GB free for apache) but each apache process is eating 53MB each, wich mean im only allowed to accept 50 process. The KeepAlive = Off, but I notice those connections arent closing fast enough, is that normal?

  Read the article

• no display on tv when connecting pc via hdmi in win7

  - by Kane

  The system of pc is win7 32bit, the video card is ATI 4670. The tv is philips 74xx series. And the monitor is Dell 19' that connect with pc via VGA. The tv can receive the singal and show the pictures when booting the pc(bios self checking, the logo of windows 7), however the tv says there is no signal after the win7 login window shows. I have installed the latest CCC and driver of ATI video card. Does anyone have idea for it?

  Read the article

• How to compile a gvim from source using the latest version

  - by Kit Ho

  I'm using Ubuntu. I performed the following commands in the vim source folder: sudo apt-get build-dep vim ./configure --with-features=huge --enable-gui=gtk2 --enable-rubyinterp=yes --enable-pythoninterp=yes make sudo make install I have found that related posts but fail in Ubuntu 13.04 Update: sorry for not providing enough error msg here is the error after do the .configure checking --enable-gui argument... no GUI support How can i let the system to find the GUI library? I have try to do apt-get build-dep vim the gui lib should be included, but no luck what else can i do? i have also tried --enable-gui=<auto, gtk, gtk2, gnome2> all of them show the same error no GUI support...

  Read the article

• Installing sublime text plugins all at once

  - by James

  Is there a way to install all the sublime text 2 plugins that you would like to install all at once. In Notepad++, there is a plugin manager which lets you install all the plugins you want to install by checking the box next to the plugin name & description. I was wandering if there is something like that for sublime text. For eg, I would like to install Zen Coding, JQuery Package for Sublime Text, Sublime Prefixr, JS Format, SublimeLinter and many other plugins all at once rather than typing each plugin in the Package Control and installing it one by one.

  Read the article

• Entourage Reminders for events not on calendar

  - by Jon Lasser

  After a series of nasty mishaps, I needed to create a new Entourage profile and re-populate my calendar by resynching it with my Exchange Server. Now I'm receiving multiple notifications for a single appointment -- two or even four at once. (Perhaps four is due to the intermediate 'reset' attempts I made before discarding and creating a new profile.) Reviewing my calendar I see only a single appointment, not multiple appointments. Checking my Outlook calendar confirms only a single appointment. My local calendar is completely empty. Is there a separate Entourage database for reminders that I can clear or resync? Is there somewhere else for calendar appointments to live where I'm not looking?

  Read the article

• No win 7 users available for login after dell datasafe factory reset

  - by user897052

  I created install discs using the Dell datasafe 2.0 backup utility in order to re-install windows on a friend's laptop (dell inspiron n5110). I ran the discs to do a factory reset. after the whole process, it booted, started loading windows 7, displayed the messages "setup is preparing your computer for first use" and "setup is checking video performance," and showed the login screen. However, there don't seem to be any active users on the machine - I opened a command prompt window to check the users on the machine. Using the command prompt (again, from the login window), i activated/enabled the administrator account, and even created another admin account, and upon logging in received several errors, couldn't load any mmc's, etc. any help would be appreciated.

  Read the article

• Aruba Wireless Controller 200 and AP70 manual

  - by techie

  I have an Aruba wireless system that is currently in use but there is no documentation from the previous person in charge. I have no manuals or login information for the wireless controllers and APs. I checked the Aruba website and you need to register to access the support information but registration isn't instant and takes several days. I've waited for quite a while now and have tried googling and checking the Aruba forums but have found no indication of a manual. What I really need is the ability to reset the controller and APs so I can access the device with the default username and password. There is no reset button on this device so I have no idea how you go about resetting the controller and APs. Hm it seems I can't create a new tag as a new user. If possible can someone add an "Aruba" tag?

  Read the article

• Windows 8 Media Center Pack Install Fails with DoTransmogrify failed due to error 0x80070011

  - by Conrad Frix

  When I attempt to use Add Features to install the Windows 8 Media Center pack I get the "Something Went Wrong" Message Checking %localappdata%\Microsoft\Windows\Windows Anytime Upgrade\Upgrade.log I can see the following error block 2012-10-27 18:43:13, Error WAU DoTransmogrify failed due to error 0x80070011. 2012-10-27 18:43:13, Error WAU UpgradeSKU failed. Exiting. 2012-10-27 18:43:13, Error WAU The worker process exited unexpectedly 2012-10-27 18:43:13, Error WAU Something went wrong 2012-10-27 18:43:13, Error WAU Close this wizard and try again. My understanding is that 0x80070011 means Error_Not_Same_Device. I think this may be related to the fact that C:\Users is a junction point to D:\Users Do I have to move my users directory back? Is there a workaround?

  Read the article

• Receiving "May not have permission to edit" warning, even though I have permissions

  - by Choy

  I'm using Panic Transmit as an FTP client connecting to an Ubuntu 12.x server. When I try to edit and upload a file using it, I receive the warning that tells me to check my permissions as I may not have permissions to edit a file. I'm not setting the permissions on upload and I do have permission to edit files. After clearing the warning and checking the file on the server, may changes go through. The files I'm trying to edit are set to 775 and are part of the www-data group which my user is part of as well. Any idea why I would be getting such a prompt? This only happens on some files, not all.

  Read the article

• Pysdm has disabled my ability to write to my storage partition

  - by Atlas

  I have a dual boot setup with Windows 7 and Mint 13 Cinnamon. As well as their respective partitions I also have a large one (NTFS) for storing all my music, videos, documents etc. I downloaded pysdm as I was told it would enable me to configure Linux to auto-mount my storage partition. It has indeed been helpful in auto-mounting my storage. However, since installing it I can no longer write to the partition which makes 500GB of my hard drive utterly useless! I've tried to unselect the "Mount file system in read only mode" option, but the program keeps re-checking it after I close that window (and even when I click apply). Why is it doing this and how can I get it to recognise that I need to read AND write on that partition?

  Read the article

• Hudson + Jboss AS 7.1 + Maven 3 Project Build Error

  - by Zehra Gül Çabuk

  I've wanted to prepare an environment that I'm able to build my project and run my tests on a integration server. So I've installed an Jboss application server 7.1 and deployed hudson.war to it. Then I've created a project to trigger "mvn clean install" and when I built it I've got following exception. [INFO] Using bundled Maven 3 installation [INFO] Checking Maven 3 installation environment [workspace] $ /disk7/hudson_home/maven/slavebundle/bundled-maven/bin/mvn --help [INFO] Checking Maven 3 installation version [INFO] Detected Maven 3 installation version: 3.0.3 [workspace] $ /disk7/hudson_home/maven/slavebundle/bundled-maven/bin/mvn clean install -V -B -Dmaven.ext.class.path=/disk7/hudson_home/maven/slavebundle/resources:/disk7/hudson_home/maven/slavebundle/lib/maven3-eventspy-3.0.jar:/disk7/jboss-as-7.1.0.Final/standalone/tmp/vfs/deploymentdf2a6dfa59ee3407/hudson-remoting-2.2.0.jar-407215e5de02980f/contents -Dhudson.eventspy.port=37183 -f pom.xml [DEBUG] Waiting for connection on port: 37183 Apache Maven 3.0.3 (r1075438; 2011-02-28 19:31:09+0200) Maven home: /disk7/hudson_home/maven/slavebundle/bundled-maven Java version: 1.7.0_04, vendor: Oracle Corporation Java home: /usr/lib/jvm/jdk1.7.0_04/jre Default locale: en_US, platform encoding: UTF-8 OS name: "linux", version: "3.2.0-24-generic", arch: "amd64", family: "unix" [ERROR] o.h.m.e.DelegatingEventSpy - Init failed java.lang.NoClassDefFoundError: hudson/remoting/Channel at org.hudsonci.maven.eventspy.common.RemotingClient.open(RemotingClient.java:103) ~[maven3-eventspy-runtime.jar:na] at org.hudsonci.maven.eventspy_30.RemotingEventSpy.openChannel(RemotingEventSpy.java:86) ~[maven3-eventspy-3.0.jar:na] at org.hudsonci.maven.eventspy_30.RemotingEventSpy.init(RemotingEventSpy.java:114) ~[maven3-eventspy-3.0.jar:na] at org.hudsonci.maven.eventspy_30.DelegatingEventSpy.init(DelegatingEventSpy.java:128) ~[maven3-eventspy-3.0.jar:na] at org.apache.maven.eventspy.internal.EventSpyDispatcher.init(EventSpyDispatcher.java:84) [maven-core-3.0.3.jar:3.0.3] at org.apache.maven.cli.MavenCli.container(MavenCli.java:403) [maven-embedder-3.0.3.jar:3.0.3] at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:191) [maven-embedder-3.0.3.jar:3.0.3] at org.apache.maven.cli.MavenCli.main(MavenCli.java:141) [maven-embedder-3.0.3.jar:3.0.3] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) ~[na:1.7.0_04] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) ~[na:1.7.0_04] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) ~[na:1.7.0_04] at java.lang.reflect.Method.invoke(Method.java:601) ~[na:1.7.0_04] at org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290) [plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230) [plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409) [plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352) [plexus-classworlds-2.4.jar:na] Caused by: java.lang.ClassNotFoundException: hudson.remoting.Channel at org.codehaus.plexus.classworlds.strategy.SelfFirstStrategy.loadClass(SelfFirstStrategy.java:50) ~[plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.realm.ClassRealm.loadClass(ClassRealm.java:244) ~[plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.realm.ClassRealm.loadClass(ClassRealm.java:230) ~[plexus-classworlds-2.4.jar:na] ... 16 common frames omitted [ERROR] ABORTED [ERROR] Failed to initialize [ERROR] Caused by: hudson/remoting/Channel [ERROR] Caused by: hudson.remoting.Channel [ERROR] Failure: java.net.SocketException: Connection reset FATAL: Connection reset java.net.SocketException: Connection reset at java.net.SocketInputStream.read(SocketInputStream.java:189) at java.net.SocketInputStream.read(SocketInputStream.java:121) at java.io.FilterInputStream.read(FilterInputStream.java:133) at java.io.BufferedInputStream.fill(BufferedInputStream.java:235) at java.io.BufferedInputStream.read(BufferedInputStream.java:254) at hudson.remoting.Channel.<init>(Channel.java:385) at hudson.remoting.Channel.<init>(Channel.java:347) at hudson.remoting.Channel.<init>(Channel.java:320) at hudson.remoting.Channel.<init>(Channel.java:315) at hudson.slaves.Channels$1.<init>(Channels.java:71) at hudson.slaves.Channels.forProcess(Channels.java:71) at org.hudsonci.maven.plugin.builder.internal.PerformBuild.doExecute(PerformBuild.java:174) at org.hudsonci.utils.tasks.PerformOperation.execute(PerformOperation.java:58) at org.hudsonci.maven.plugin.builder.MavenBuilder.perform(MavenBuilder.java:169) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:630) at hudson.model.Build$RunnerImpl.build(Build.java:175) at hudson.model.Build$RunnerImpl.doRun(Build.java:137) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:429) at hudson.model.Run.run(Run.java:1366) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:145) I want to point out the command which is tried to execute by hudson : /disk7/hudson_home/maven/slavebundle/bundled-maven/bin/mvn clean install -V -B -Dmaven.ext.class.path=/disk7/hudson_home/maven/slavebundle/resources:/disk7/hudson_home/maven/slavebundle/lib/maven3-eventspy-3.0.jar:/disk7/jboss-as-7.1.0.Final/standalone/tmp/vfs/deploymentdf2a6dfa59ee3407/hudson-remoting-2.2.0.jar-407215e5de02980f/contents -Dhudson.eventspy.port=37183 -f pom.xml It tries to find "hudson-remoting-2.2.0.jar" to put it to build path but it searches it at the wrong place because when I look where the hudson-remoting jar I found it at /disk7/jboss-as-7.1.0.Final/standalone/tmp/vfs/deploymentdf2a6dfa59ee3407/hudson-remoting-2.2.0.jar-407215e5de02980f/hudson-remoting-2.2.0.jar for this build(not in contents). So how can I configure the hudson to force it looking at the right place for jars? Is there anyone has an idea? Thanks in advance.

  Read the article

• Port forwarding no longer works

  - by Auryn

  Prior to testing an OpenVPN installation, I setup a basic VPN server using the software already built into Windows 7. Port forwarding on the Linksys router worked as normal and I was able to connect remotely. After doing an install of OpenVPN Access Server on a spare box running Ubuntu, and adding new ports to be forwarded I was unable to access the VPN from an external source as the required ports all indicated that they were closed. (During testing XRDP and VNCSERVER were also installed to facilitate access to the box) Checking back on the Windows 7 VPN resulted in no access to that vpn setup either. All ports are now reporting a being closed despite being previously open even ports that were being used for other services. Adding and removing port forwarding rules seem to have no effect. At this point, in order to troubleshoot, both the firewall and anti-virus software have been disabled on the Windows 7 machine. Could this be just a router issue? Is there any way out of this without having to reset and reconfigure the router?

  Read the article

• Lots of 408 Request Timed Out from same IPs

  - by GreatFire

  Web server: Nginx. Checking our log files, there are many log entries of connections that: take 59-61 seconds send an empty request (or at least none is logged) result in a 408 response (request timed out) do not contain any http_user_agent originate from a limited number of IPs We are monitoring average times to serve responses and this obviously inflates our statistics. Apart from that though, is this a problem? Any idea why it is occurring? Does it suggest that somebody is intentionally messing with us? What should we do?

  Read the article

• Ubuntu 10.04 server crash

  - by Jamie

  I'm running an Ubuntu 10.04 (x64) as a web/mysql server. The server became unresponsive to SSH, Ping, HTTP etc. and the technician with physical access to the machine sent me this screengrab here: http://img442.imageshack.us/img442/389/img00062201012211332.jpg from the connected monitor before he rebooted (and the situation is fixed). I'm not sure what log this information is kept in as I can't find the text after checking the logs after reboot. Can anyone help me to investigate what happened to try and ensure it doesn't happen again? Thanks

  Read the article

• www a-record vs cname-record

  - by Sorin Buturugeanu

  Hi! I have a website that I will be hosting DNS for (testing purposes at first and then it will have some limited traffic). I have set up DNS so that site.tld has an A record to the actual IP but I don't know what to do about www.site.tld. Both site.tld and www.site.tld will point to the same server / application so my logic tells me to add a cname record so that www.site.tld becomes an alias for site.tld, BUT, I've been checking my settings with intodns.com and if I only add a CNAME for the www.site.tld it gives me the following error: ERROR: I could not get any A records for www.cexa.ro! (the error clears once I do an A record for www.site.tld to point to the actual IP) I don't know if there is a "rule" that "www." should always be an A record even though it's actually pointing to the same IP / application. Thanks for helping me understand this!

  Read the article

• sshd warning, "POSSIBLE BREAK-IN ATTEMPT!" for failed reverse DNS

  - by rking

  Whenever I SSH somewhere I get something like this in the logs: sshd[16734]: reverse mapping checking getaddrinfo for 1.2.3.4.crummyisp.net [1.2.3.4] failed - POSSIBLE BREAK-IN ATTEMPT! And it is right: if I do host 1.2.3.4 it returns 1.2.3.4.crummyisp.net, but if I do host 1.2.3.4.crummyisp.net it is not found. I have two questions: What security threat is there? How could anyone fake a one-way DNS in some threatening way? Do I have any recourse for fixing this? I'll send my ISP a bug report, but who knows where that'll go.

  Read the article

• Bash Script Exits su or ssh Session Rather than Script

  - by Russ

  I am using CentOS 5.4. I created a bash script that does some checking before running any commands. If the check fails, it will simply exit 0. The problem I am having is that on our server, the script will exit the su or ssh session when the exit 0 is called. #!/bin/bash # check if directory has contents and exit if none if [ -z "`ls /ebs_raid/import/*.txt 2>/dev/null`" ]; then echo "ok" exit 0 fi here is the output: [root@ip-10-251-86-31 ebs_raid]# . test.sh ok [russ@ip-10-251-86-31 ebs_raid]$ as you can see, I was removed from my sudo session, if I wasn't in the sudo session, it would have logged me out of my ssh session. I am not sure what I am doing wrong here or where to start.

  Read the article

• Java version indicates SE 6, Java Control Panel SE 8

  - by Mariogs

  So I'm trying to get the Java 7 as the default version on my machine, running Mac OS X 10.9.3. When I run: java -version I get: java version "1.6.0_65" Java(TM) SE Runtime Environment (build 1.6.0_65-b14-462-11M4609) Java HotSpot(TM) 64-Bit Server VM (build 20.65-b04-462, mixed mode) When I run: javac -version I get: javac 1.6.0_65 When I go into System Preferences -- Java -- Update, I see: Your system has the recommended vesion of Java. Java 8 Update 05. I guess I have a few questions: 1) Why does my Java Control Panel claim I have Java 8, but my work in the terminal (when checking my Java version) says otherwise? 2) I just downloaded the .dmg file for Java SE 7 from Oracle's site and installed, though it's nowhere to be seen... Thanks for the help, Mariogs

  Read the article

• Running a scheduled task as SYSTEM with console window open

  - by raoulsson

  I am auto creating scheduled tasks with this line within a batch windows script: schtasks /Create /RU SYSTEM /RP SYSTEM /TN startup-task-%%i /TR %SPEEDWAY_DIR%\%TARGET_DIR%%%i\%STARTUPFILE% /SC HOURLY /MO 1 /ST 17:%%i1:00 I wanted to avoid using specific user credentials and thus decided to use SYSTEM. Now, when checking in the taskmanagers process list or, even better, directly with the C:\> schtasks command itself, all is working well, the tasks are running as intended. However in this particular case I would like to have an open console window where I can see the log flying by. I know I could use C:\> tail -f thelogfile.log if I installed e.g. cygwin (on all machines) or some proprietary tools like Baretail on Windows. But since I only switch to these machines in case of trouble, I would prefer to start the scheduled task in such a way that every user immediately sees the log. Any chance? Thanks!

  Read the article

• Windows Color Calibrator Does Not Retain Color Settings

  - by Zian Choy

  When I try to calibrate the monitor using Windows 7's color calibrator, the monitor rejects changes to the color settings. For example, one of my monitors has a blueish tinge. If I click my mouse to tone down the blue and then let go of my mouse the monitor will go back to being blueish. At the moment, I am getting around the problem by using the color controls in the monitor's on screen displays. How can I get the color calibrator to work? Update: I tried checking the color settings in the ATI Radeon Catalyst Control Center and noticed that I can't do anything. The "Reactivate ATI color controls" button keeps flashing and any changes I try to make are discarded instantly.

  Read the article

• Why won't the Office 2007 AutoCorrections feature install correctly?

  - by gilles27

  I've installed Office 2007 successfully but each time I use an application that requires spell checking (e.g. Word, Outlook) I begin typing and get the following message The list of common English (U.K.) AutoCorrections is not available. This feature is not currently installed. Would you like to install it now? If I click Yes, I get an error with the message The list of common English (U.K.) AutoCorrections is not available. Microsoft Office Outlook cannot install the necessary files due to Windows Installer error 1605. This action is only valid for products that are currently installed. Does anyone know what I can do to resolve this? A reinstall hasn't worked.

  Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >