Search Results

Search found 2798 results on 112 pages for 'ftp'.

Page 78/112 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• Exposing the AnyConnect HTTPS service to outside network

  - by Maciej Swic

  We have a Cisco ASA 5505 with firmware ASA9.0(1) and ASDM 7.0(2). It is configured with a public ip address, and when trying to reach it from the outside by HTTPS for AnyConnect VPN, we get the following log output: 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Built inbound TCP connection 2889 for outside:<client-ip>/51000 (<client-ip>/51000) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Built inbound TCP connection 2890 for outside:<client-ip>/50999 (<client-ip>/50999) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Teardown TCP connection 2889 for outside:<client-ip>/51000 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Teardown TCP connection 2890 for outside:<client-ip>/50999 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency We finished the startup wizard and the anyconnect vpn wizard and here is the resulting configuration: Cryptochecksum: 12262d68 23b0d136 bb55644a 9c08f86b : Saved : Written by enable_15 at 07:08:30.519 UTC Mon Nov 12 2012 ! ASA Version 9.0(1) ! hostname vpn domain-name office.<redacted>.com enable password <redacted> encrypted passwd <redacted> encrypted names ip local pool vpn-pool 192.168.67.2-192.168.67.253 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.68.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address <redacted> 255.255.255.248 ! ftp mode passive dns server-group DefaultDNS domain-name office.<redacted>.com object network obj_any subnet 0.0.0.0 0.0.0.0 pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu inside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected ! object network obj_any nat (inside,outside) dynamic interface timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL http server enable http 192.168.68.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto ca trustpoint _SmartCallHome_ServerCA crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=vpn proxy-ldc-issuer crl configure crypto ca trustpool policy crypto ca certificate chain _SmartCallHome_ServerCA certificate ca 6ecc7aa5a7032009b8cebcf4e952d491 <redacted> quit crypto ca certificate chain ASDM_TrustPoint0 certificate f678a050 <redacted> quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.68.0 255.255.255.0 inside ssh timeout 5 console timeout 0 vpn-addr-assign local reuse-delay 60 dhcpd auto_config outside ! dhcpd address 192.168.68.254-192.168.68.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ssl trust-point ASDM_TrustPoint0 inside ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside enable inside anyconnect image disk0:/anyconnect-win-3.1.01065-k9.pkg 1 anyconnect image disk0:/anyconnect-linux-3.1.01065-k9.pkg 2 anyconnect image disk0:/anyconnect-macosx-i386-3.1.01065-k9.pkg 3 anyconnect profiles GM-AnyConnect_client_profile disk0:/GM-AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_GM-AnyConnect internal group-policy GroupPolicy_GM-AnyConnect attributes wins-server none dns-server value 192.168.68.254 vpn-tunnel-protocol ikev2 ssl-client default-domain value office.<redacted>.com webvpn anyconnect profiles value GM-AnyConnect_client_profile type user username <redacted> password <redacted> encrypted tunnel-group GM-AnyConnect type remote-access tunnel-group GM-AnyConnect general-attributes address-pool vpn-pool default-group-policy GroupPolicy_GM-AnyConnect tunnel-group GM-AnyConnect webvpn-attributes group-alias GM-AnyConnect enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context call-home reporting anonymous Cryptochecksum:12262d6823b0d136bb55644a9c08f86b : end Clearly we are missing something, but the question is, what?

  Read the article

• difference between compiled and installed via rpm (zypper)

  - by cherouvim

  In an openSUSE 11.1 I download, compile and install ImageMagick via: wget ftp://.../pub/graphics/ImageMagick/ImageMagick-6.7.7-0.zip unzip ImageMagick-6.7.7-0.zip cd ImageMagick-6.7.7-0 ./configure --prefix=/usr/local/ImageMagick make make install Everything works nicelly until I discover that JPG is not supported: identify -list format | grep -i jpg [nothing related to JPG returned] So I reconfigure and recompile using: ./configure --prefix=/usr/local/ImageMagick --with-jpeg=yes --with-jp2=yes make make install But that changes nothing. I end up uninstalling: make uninstall and installing via zypper: zypper install ImageMagick This installed version 6.4.3 and now it does support JPG: identify -list format | grep -i jpg JPG* JPEG rw- Joint Photographic Experts Group JFIF format Any idea on what is going on here? What is a possible reason that this capability of ImageMagick was not there when compiled from source but was there when installed from rpm? Note that I don't necessarily care a lot about ImageMagick (since it now works), but generally about his kind of behaviour, becase in one way or another I've seen this happen in other ocasions as well.

  Read the article

• How to setup and manage a shared hosting server on Windows Server 2008 R2 Web Edition?

  - by Motivated Student

  Background I am a newbie in using Windows Server 2008 R2 Web Edition (and other editions as well). I have a static IP, a very fast internet connection, a server (PRIMERGY TX100 S1 Server) and Windows Server 2008 R2 Web Edition (trial version). The objective is to setup the server to be a shared hosting server such that each of my friends has a private account to manage his/her domain. to upload his/her web content to the server using the encrypted ftp. to manage database administration. to manage Certificate. etc Questions Is there a good reference to learn "how to setup and manage a shared hosting server on Windows Server 2008 R2" ? What are the rough steps I have to do to accomplish my objective?

  Read the article

• Ideas for SVN/SQL/PHP/Linux Dev Enviroment Supporting Multiple Isolated Environments?

  - by jpganz18

  I am trying to create a "dev" for my users. In that environment they would access to their own account of PHPMyAdmin, SQL, Subversion and FTP which is not a big problem, but I would like to emulate like if each one would be in their own server. I mean so that they could change the PHP configuration (for example) and would be done only in its own environment. Any idea how to do this? Do I have to make something "special" at the installations of my server or something like that?

  Read the article

• Why won't vsftpd let me log in with a virtual user account?

  - by Ramon

  I would like to use vsftpd with virtual users and pam_pwdfile.so. I installed vsftpd and added two users (ramon and dragon) via htpasswd to my file /etc/vsftpd.passwd. The /etc/pam.d/vsftpd is configured to use this file. auth required pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed auth required pam_pwdfile.so pwdfile /etc/vsftpd.passwd account required pam_permit.so @include common-account @include common-session The user "ramon" is also available in /etc/passwd. A login to the ftp with the user "ramon" works as expected. But a login using "dragon" does not :/ The result is always Login failed: 530 Login incorrect. Since it's possible that I made a mistake I tried the exact way documented in /usr/share/doc/vsftpd/examples/VIRTUAL_USERS/README. Still no luck. I can login with the user "ramon", but not with the user "dragon". Any ideas?

  Read the article

• Plesk file permissions - Apache/PHP conflicting with user accounts.

  - by hfidgen

  Hiya, I'm building a Drupal site which performs various automatic disk operations using the apache user (id=40). The problem is that the site was set up on a subdomain belonging to user ID 10001 (ie my main FTP account) so the filesystem belongs to that user ID. So I keep getting errors like this: warning: move_uploaded_file() [function.move-uploaded-file]: SAFE MODE Restriction in effect. The script whose uid is 10001 is not allowed to access /var/www/vhosts/domain.com/httpdocs/sites/default/files/images/user owned by uid 48 in /var/www/vhosts/domain.com/httpdocs/includes/file.inc on line 579. I've tried changing the apache group in httpd.conf to apache:psacln, psacln being the default group for all web users but that's not helped. The situation now is: ..../files/images/ = 777 and chown = ftplogin:psacln ..../files/images/user = 775 and chown = apache:psacln ..../files/tmp = 777 and chown = ftplogin:psacln So apparently uid 40 and 10001 both have permissions to write to any of the 3 directories involved, but still can't. Am i missing something here? Can anyone help? Thanks!

  Read the article

• Windows SBS 2011 DNS Role (service) failing & needing restarting

  - by HaydnWVN

  Have a Windows SBS 2011 with Exchange that is handling all DNS for the network. Since getting a 3rd party (Hardware & Support) to setup a recieving FTP service and restricting Exchanges memory useage for another 3rd party product (Stock software) the local network seems to periodically 'lose the internet connection'. Delving deeper I found that the DNS service is somehow failing/stopping without the actual service on the server reporting such (nothing in event logs). A simple restart of the 'DNS Role' on the server solves the problem. The manager onsite reports that he has to do this most days in the afternoon - yet not at the same time and other days it works fine without a restart being required. I'm unable (lacking sufficient SBS2011 knowledge) to diagnose this further, ideally I would like the DNS Role to report (and log) the failure, then automatically restart itself.

  Read the article

• Cisco ASA - Enable communication between same security level

  - by Conor

  I have recently inherited a network with a Cisco ASA (running version 8.2). I am trying to configure it to allow communication between two interfaces configured with the same security level (DMZ-DMZ) "same-security-traffic permit inter-interface" has been set, but hosts are unable to communicate between the interfaces. I am assuming that some NAT settings are causing my issue. Below is my running config: ASA Version 8.2(3) ! hostname asa enable password XXXXXXXX encrypted passwd XXXXXXXX encrypted names ! interface Ethernet0/0 switchport access vlan 400 ! interface Ethernet0/1 switchport access vlan 400 ! interface Ethernet0/2 switchport access vlan 420 ! interface Ethernet0/3 switchport access vlan 420 ! interface Ethernet0/4 switchport access vlan 450 ! interface Ethernet0/5 switchport access vlan 450 ! interface Ethernet0/6 switchport access vlan 500 ! interface Ethernet0/7 switchport access vlan 500 ! interface Vlan400 nameif outside security-level 0 ip address XX.XX.XX.10 255.255.255.248 ! interface Vlan420 nameif public security-level 20 ip address 192.168.20.1 255.255.255.0 ! interface Vlan450 nameif dmz security-level 50 ip address 192.168.10.1 255.255.255.0 ! interface Vlan500 nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0 ! ftp mode passive clock timezone JST 9 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network DM_INLINE_NETWORK_1 network-object host XX.XX.XX.11 network-object host XX.XX.XX.13 object-group service ssh_2220 tcp port-object eq 2220 object-group service ssh_2251 tcp port-object eq 2251 object-group service ssh_2229 tcp port-object eq 2229 object-group service ssh_2210 tcp port-object eq 2210 object-group service DM_INLINE_TCP_1 tcp group-object ssh_2210 group-object ssh_2220 object-group service zabbix tcp port-object range 10050 10051 object-group service DM_INLINE_TCP_2 tcp port-object eq www group-object zabbix object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service http_8029 tcp port-object eq 8029 object-group network DM_INLINE_NETWORK_2 network-object host 192.168.20.10 network-object host 192.168.20.30 network-object host 192.168.20.60 object-group service imaps_993 tcp description Secure IMAP port-object eq 993 object-group service public_wifi_group description Service allowed on the Public Wifi Group. Allows Web and Email. service-object tcp-udp eq domain service-object tcp-udp eq www service-object tcp eq https service-object tcp-udp eq 993 service-object tcp eq imap4 service-object tcp eq 587 service-object tcp eq pop3 service-object tcp eq smtp access-list outside_access_in remark http traffic from outside access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq www access-list outside_access_in remark ssh from outside to web1 access-list outside_access_in extended permit tcp any host XX.XX.XX.11 object-group ssh_2251 access-list outside_access_in remark ssh from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group ssh_2229 access-list outside_access_in remark http from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group http_8029 access-list outside_access_in remark ssh from outside to internal hosts access-list outside_access_in extended permit tcp any host XX.XX.XX.13 object-group DM_INLINE_TCP_1 access-list outside_access_in remark dns service to internal host access-list outside_access_in extended permit object-group TCPUDP any host XX.XX.XX.13 eq domain access-list dmz_access_in extended permit ip 192.168.10.0 255.255.255.0 any access-list dmz_access_in extended permit tcp any host 192.168.10.29 object-group DM_INLINE_TCP_2 access-list public_access_in remark Web access to DMZ websites access-list public_access_in extended permit object-group TCPUDP any object-group DM_INLINE_NETWORK_2 eq www access-list public_access_in remark General web access. (HTTP, DNS & ICMP and Email) access-list public_access_in extended permit object-group public_wifi_group any any pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu public 1500 mtu dmz 1500 mtu inside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 60 global (outside) 1 interface global (dmz) 2 interface nat (public) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 2229 192.168.0.29 2229 netmask 255.255.255.255 static (inside,outside) tcp interface 8029 192.168.0.29 www netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.13 192.168.10.10 netmask 255.255.255.255 dns static (dmz,outside) XX.XX.XX.11 192.168.10.30 netmask 255.255.255.255 dns static (dmz,inside) 192.168.0.29 192.168.10.29 netmask 255.255.255.255 static (dmz,public) 192.168.20.30 192.168.10.30 netmask 255.255.255.255 dns static (dmz,public) 192.168.20.10 192.168.10.10 netmask 255.255.255.255 dns static (inside,dmz) 192.168.10.0 192.168.0.0 netmask 255.255.255.0 dns access-group outside_access_in in interface outside access-group public_access_in in interface public access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.9 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 20 console timeout 0 dhcpd dns 61.122.112.97 61.122.112.1 dhcpd auto_config outside ! dhcpd address 192.168.20.200-192.168.20.254 public dhcpd enable public ! dhcpd address 192.168.0.200-192.168.0.254 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 130.54.208.201 source public webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp !

  Read the article

• Reputable web based ssh client? [closed]

  - by Doug T.

  I'm connected to a coffee shop's wireless network right now, and I suspected I'd be able to use my laptop and ssh somewhere. Unlucky me they seem to be blocking everything but web traffic (my testing seems to show everything but port 80 is working, can't ping, ftp, etc). I googled "web based ssh clients" however I have reservations about entering my login credentials on any Joe Schmoe's web app. I was wondering if anyone has had any experience with any reputable web based ssh clients? If so could you please point me at one that I could trust?

  Read the article

• CentOS and Snapshots

  - by Jonathan Sampson

  I'm planning on purchasing a virtual-dedicated server today and would like to pass a quick question by the community here before I do. I'm likely going to be getting CentOS, as that seems to be a pretty stable, and popular distro from what I can tell. One of the companies I contacted (MediaTemple) mentioned they provide snapshots just incase I start doing something that could potentially cripple my server - I could always restore the last snapshot. Another company (GoDaddy) said they would provide routine snapshots once a day, week, or month and back it up to a remote FTP for me to download. My question is this, is the "snapshot" capability provided in the OS itself? I'm not super-confident in my abilities yet to manage a server, so this functionality would be very attractive. Or, do I need to pick a host that provides this as an extra addon to the already rendered services?

  Read the article

• DNS PTR record when domain on shared IP address

  - by Marco Demaio

  Hello, I own a typical shared IP hosting plan and domain. I can modify the DNS of the domain from the control panel. The mailserver shares the same IP address, so my typical DNS config is: www.mydomain.com A -> IP mydomain.com A -> IP ftp.mydomain.com A -> IP mail.mydomain.com A -> IP mydomain.com MX(10) -> IP I read some Q&A on this site where they suggest to add PTR record mainly for mailserver. I would like to add PTR record to my domain, I have got two questions: 1) can PTR record be added even if the hosting/mailserver are on a shared IP address? Or do I need a dedicated IP. 2) How do I setup PTR record, I mean does it look like A record: mydomain.com (PTR) -> myip

  Read the article

• Calculate data transferred in a local LAN

  - by ramdaz

  How do you calculate the data flown between a computer and the gateway computer. I have a Linux router/gateway running IP Tables which routes internet traffic in a LAN. I have individual users with IP/MAC Address mapped who access Interet through the gateway computer. I would like to find out the traffic utilized by individual users. Is it possible for us to find out what kind of traffic was HTTP, SMTP, FTP etc. Is it also possible to pool the information on hourly basis, and get specific info so that I can store information in a database? I have heard of IP Accounting? Is that the right way

  Read the article

• How do I run AWS code on an EC2 instance?

  - by Marianna

  I just started with Amazon web services, and I have an EC2 instance. I downloaded the JAVA SDK and the Eclipse toolbox. I am able to run a sample program locally on my PC and connect to the Amazon databases, etc. My question is, what do I need to do to get this working on my EC2 instance? This may not even be specific to AWS. On Eclipse, I can just "Run as Application" and run any code. On the server side, what do I need to do? Should I ftp over my .java files? Should I export it to a jar and upload that? Do I need to install anything special to actually run it?

  Read the article

• Can't find newer DLINK Router DIR-400 firmware

  - by Junior Mayhé

  If you're here, it means you also have a Dlink 400 router. I asked DLINK but they didn't answer my question. I asked DLINK support again, but this time no answer (2 weeks later). In DLINK FTP site there is no firmware for DIR-400. Past year, Googling around Russia, I found a FIRMWARE_DIR400_v1.02B03.bin. But I am trying to figure out if is there any update, a 1.03 version or superior. Can anyone tell me why DLINK doesn't show this firmware update on their site, and if this DIR-450 is compatible with mine?

  Read the article

• How to find the static ip address of my router? [migrated]

  - by Wintermute

  I bricked my Linksys WRT54GS router when trying to change the firmware on it from dd-wrt to open-wrt. In order to unbrick it, I need to be able to do an ftp transfer to it. The problem is that it isn't using DHCP addressing and I can't just use the default ip address of 192.168.1.1. I have to use the ip address it was set at before it got bricked. The problem is I forgot what that number was. Is there some program or script that can find it out?

  Read the article

• pam_ecryptfs: Error getting passwd (ProFTPD)

  - by Olirav

  proftpd: pam_ecryptfs: Error getting passwd info for user [USERNAME] I am getting this error in the syslog nearly every time any user connects via FTP, the user is able to connect and the session seems to continue without a hitch. ProFTPD.log shows no error, this warning only show in the syslog. My VPS is running Ubuntu 11.10 and Proftpd 1.3.4rc2 from the Ubuntu Repo, I have made only a few changes to the config (no weird auth methods). This has been going on for quite a while but I can't quite find the cause. Anyone got any ideas? EDIT: been looking around but all I can find with this error is the source code for the program itself; it appears to be and error in ecryptfs-utils that only proftpd is triggering.

  Read the article

• General Website Security

  - by Tom

  I pay monthly for a website hosting service that provides me with PHP and FTP support. I can upload my files and create directories and such. Now, I am wondering... If I upload a folder full of images.. or music.. basically personal stuff to my website and name it 'junk1234' can other people find it? Or even search engines? If so, How would I restrict any but those who know the folder name from seeing files in it? Possibly httaccess files? I also have cpanel installed.

  Read the article

• How Can I Restrict VSFTPD to a Particular Local Group?

  - by Aaron Copley

  I'd like to control VSFTPD access by adding users to a group such that only members of the defined group can access the FTP services. I am thinking I can do this by modifying /etc/pam.d/vsftpd, but am not sure how to get started. Or is this only for virtual users in VSFTPD? I am aware of user_list and this does not seem to support groups. This doesn't provide the function I am looking for which is described above. If I am mistaken though this would be great. Thanks, Aaron

  Read the article

• How low-power can a home server get?

  - by Halik

  I've got quite simple question actually. How green, low-power and efficient x86 home server can I build using consumer parts with rather constrained budget. After looking through some Google hits I've found out that system based on dual-core atom, some modest mITX board (gigabit lan, integrated audio and gfx etc), one RAM module and one 'green' WD HDD, powered by picoITX PSU uses about 30W at idle up to 40 at load. Can you get lower (or how much lower) then that? Maybe some VIA nano chips, or single core atom? My home server would take care of some back-upping mixed with little ftp/http traffic.

  Read the article

• setup the git server in centos6.4 [on hold]

  - by hguser

  We have a server which using centos6.4. Now we want to make this server as the backup and the cvs server. We have ten user in our team. So I created ten accounts accordingly, then they can backup files to their own home directory using ftp. However I do not know how to setup the cvs, we preferred to use git. We want to implement this: Everyone can create git repositories in his home directory with read/write access using his account. Is this possible?

  Read the article

• internet connection drops randomly

  - by Remus Rigo

  hi all I have 3 PC's at home (with Win XP, Win 7 & Win 7) and a router. I am always connected to the internet through the router (PPoE connection). My problem is that sometimes when I want to search or open a page, my browser tells me that the server cannot be reached, as if I don't have a connection to the internet. Other times it logs me out from messenger, but browsing still works. FTP download/upload also works. If i disable and enable the LAN then all works fine. The connection doesn't always drop on all three PC's at the same time. Anyone got any idea besides re-installing OS? thanks

  Read the article

• Linux FHS: /srv vs /var ... where do I put stuff?

  - by wag2639

  My web development experience has started with Fedora and RHEL but I'm transitioning to Ubuntu. In Fedora/RHEL, the default seems to be using the /var folder while Ubuntu uses /srv. Is there any reason to use one over the other and where does the line split? (It confused me so much that until very recently, I thought /srv was /svr for server/service) My main concern deals with two types of folders default www and ftp directories specific application folders like: samba shares (possibly grouped under a smb folder) web applications (should these go in www folder, or do can I do a symlink to its own directory like "_/www/wordpress" - "/srv/wordpress") I'm looking for best practice, industry standards, and qualitative reasons for which approach is best (or at least why its favored).

  Read the article

• MySQLi Extension with phpMyAdmin

  - by user1062058

  I just unpacked the latest phpMyAdmin into /var/www/html/phpMyAdmin and it is giving me "The mysqli extension is missing." - how do I install this? I'm on Centos. I checked php.ini and it seems to be "unlocked". when I type in php -i |grep -i mysqli ... it looks to be enabled. Also this is PHP Version 5.3.8 php -m apc ctype curl date dom filter ftp gd hash iconv json libxml mcrypt memcache mysql mysqli openssl pcre PDO pdo_sqlite posix REflection session SimpleXML soap SPL SQLite standard tokenizer xml xmlreader xmlwriter zlib Thanks.

  Read the article

• Getting VSFTP running on Fedora 14

  - by Louis W

  Having troubles getting VSFTPD running on Fedora 14. Here is what I have done so far, please let me know if I am missing something. When I try to connect through FTP it says connection time out. Installed VSFTP with yum yum install vsftpd Edited config file vi /etc/vsftpd/vsftpd.conf Started service and made sure it would always start up service vsftpd start chkconfig vsftpd on Added and configured a new user /usr/sbin/useradd upload /usr/bin/passwd upload usermod -c "This user cannot login to a shell" -s /sbin/nologin upload Added firewall rules iptables -A INPUT -p tcp --dport 21 -j ACCEPT iptables -A OUTPUT -p tcp --sport 20 -j ACCEPT service iptables save service iptables restart Checked netstat (In reply to comment below) tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 23752/vsftpd

  Read the article

• How to drop all subnets outside of the US using iptables

  - by Jim

  I want to block all subnets outside the US. I've made a script that has all of the US subnets in it. I want to disallow or DROP all but my list. Can someone give me an example of how I can start by denying everything? This is the output from -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:ftp state NEW DROP icmp -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination And these are the rules iptables --F iptables --policy INPUT DROP iptables --policy FORWARD DROP iptables --policy OUTPUT ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp -i eth0 --dport 21 -m state --state NEW -j ACCEPT iptables -A INPUT -p icmp -j DROP Just for clarity, with these rules, I can still connect to port 21 without my subnet list. I want to block ALL subnets and just open those inside the US.

  Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >