Search Results

Search found 5214 results on 209 pages for 'j unit 122'.

Page 78/209 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• Asus EEE PC 1005HA (XP Home) refuses to connect to Virgin Mobile MiFi

  - by Dennis Wurster

  My client has an Asus EEE PC model 1005HA, and we're attempting to connect it to the WiFi network created by a VirginMobile MiFi unit. They also have a MacBook Pro with Snow Leopard that has absolutely no issue connecting to the MiFi. The specific symptom is that the netbook fails to lease an IP address from the MiFi unit. I supply the 12-digit numerical password (WPA) to the netbook, it throws a 'waiting for network' dialog with an indeterminate progress indicator, and then times out. Update: We've determined that this behavior has stopped when the EEE PC and the MiFi unit were taken out of the client's home, and to a different home that didn't have an existing wifi network. Similarly, when taken to a third location that didn't have wifi, the EEE PC and MiFi got along swimmingly. My current theory is that the existing wifi networks and the wifi leg of the MiFi unit are on the same channel and competing with one another. Perhaps the MacBook Pro has the capability to overcome this interference, while the EEE PC doesn't.

  Read the article

• How to globalize ASP.NET MVC views (decimal separators in particular)?

  - by Pawel Krakowiak

  I'm working with the NerdDinner sample application and arrived at the section which deals with the Virtual Earth map. The application stores some values for the longitude and latitude. Unfortunately on my system floating point numbers are stored with a comma as the decimal separator, not a dot like in the US. So if I have a latitude of 47.64 it's retrieved and displayed as 47,64. Because that value is passed in a function call to the Virtual Earth API it fails at that point (e.g. JavaScript API expects 47.64, -122.13, but gets 47,64, -122,13). I need to make sure that the application always uses dots. In a WebForms app I would have a common class which overrides the System.Web.UI.Page.InitializeCulture() method and I would be inheriting my pages from that class. I am not sure about how to do the same with MVC. Do I need a customized ViewPage or something? Is there an easy way to solve this? Examples?

  Read the article

• How deserealizing JSON with GSON

  - by loko

  I have one result of APPI http://developer.yahoo.com/geo/placefinder/guide/examples.html, I need to deserealizing the result JSON of example only with GSON http://where.yahooapis.com/geocode?location=San+Francisco,+CA&flags=J&appid=yourappid But i dont now have to do the class for deserealizing one JSON with array This is the reponse: {"ResultSet": {"version":"1.0", "Error":0, "ErrorMessage":"No error", "Locale":"en_US", "Quality":40, "Found":1, "Results":[ {"quality":40, "latitude":"37.779160", "longitude":"-122.420049", "offsetlat":"37.779160", "offsetlon":"-122.420049", "radius":5000, "name":"", "line1":"", "line2":"San Francisco, CA", "line3":"", "line4":"United States", "house":"", "street":"", "xstreet":"", "unittype":"", "unit":"", "postal":"", "neighborhood":"", "city":"San Francisco", "county":"San Francisco County", "state":"California", "country":"United States", "countrycode":"US", "statecode":"CA", "countycode":"", "uzip":"94102", "hash":"C1D313AD706E3B3C", "woeid":12587707, "woetype":9}] } } Im trying to deserealizing of this way but i couldn´t do that, please help me to do the correct class to get the JSON with GSON. public class LocationAddress { private ResultSet resultset; public static class ResultSet{ private String version; private String Error; private String ErrorMessage; private List<Results> results; } public static class Results{ private String quality; private String latitude; private String longitude; public String getQuality() { return quality; } public void setQuality(String quality) { this.quality = quality; } public String getLatitude() { return latitude; } public void setLatitude(String latitude) { this.latitude = latitude; } public String getLongitude() { return longitude; } public void setLongitude(String longitude) { this.longitude = longitude; } } }

  Read the article

• In SQL can I return a tables with a varying number of columns

  - by Matt

  I have a somewhat more complicated scenario, but I think it should be possible. I have a large SPROC whose result is a set of characteristics for a set of persons. So the Table would look something like this: Property | Client1 Client 2 Client3 ----------------------------------------------------------- Sex | M F M Age | 67 56 67 Income | Low Mid Low It's built using cursors, iterating over different datasets. The problem I am facing is that there is a varying number of Clients and Properties, so an equally valid result over different input sets might be: Property | Client1 Client 2 ------------------------------------------- Sex | M F Age | 67 56 Weight | 122 122 The different number of properties is easy, those are just extra rows. My problem is that I need to declare a temporary table with a varying number of columns. There could be 2 clients or 100. Every client in guaranteed to have every property ultimately listed. What SQL structure would statisfy this and how can I declare it and insert things into it? I can't just flip the columns and rows either because there is a variable number of each.

  Read the article

• one more time about loop that doesn't work

  - by unit

  I have asked a couple of questions about this for loop: String[] book = new String [ISBN_NUM]; bookNum.replaceAll("-",""); if (bookNum.length()!=ISBN_NUM) throw new ISBNException ("ISBN "+ bookNum + " must be 10 characters"); for (int i=0;i<bookNum.length();i++) { if (Character.isDigit(bookNum.charAt(i))) book[j]=bookNum.charAt(i); //this is the problem right here j++; if (book[9].isNotDigit()|| book[9]!="x" || book[9]!="X") throw new ISBNException ("ISBN " + bookNum + " must contain all digits" + "or 'X' in the last position"); } which will not compile. An answer I had from the other question I asked told me that the line where the error occurs is wrong in that bookNum.charAt(i) is an (immutable) string, and I can't get the values into a book array that way. What I need to do on my assignment is check an ISBN number (bookNum) to see that it is all numbers, except the last digit can be an 'x' (valid ISBN). Is this the best way to do it? If so, what the hell am I doing wrong? If not, what method would be a better one to use?

  Read the article

• UIScrollView -> UIView ->UIImageView

  - by RapidM

  Hi everyone, I am trying to create a horizontal UIScrollView with a few images in it. The user should be able to scroll horizontal between all the images. If he holds down the finger the scrolling should stop. I though about making a UIScrollView (320 x 122 px) UIView for the content + really big width UIImageView for the individual images Here is my code: headScrollView = [[UIScrollView alloc] initWithFrame:CGRectMake(0, 0, 320, 122)]; [self.view addSubview:headScrollView]; // Dafür einen contentView programmatisch festlegen headContentView = [[UIView alloc] initWithFrame:CGRectMake(0, 0, 500, headScrollView.frame.size.height)]; [headContentView setBackgroundColor:[UIColor lightGrayColor]]; [headScrollView addSubview:headContentView]; [headScrollView setContentSize:headContentView.frame.size]; headImageView = [[UIImageView alloc] init]; NSMutableArray *elements = [appDelegate getElements]; for (int i = 0; i < [elements count]; i++) { headImageView.image = [UIImage imageNamed:[[elements objectAtIndex:i] nameOfElement]]; [headContentView addSubview:headImageView]; } But it's not working. There is no image there :-( When I do a NSLOG i get 3 names of the images, so it should work... Any ideas? Thanks!

  Read the article

• Getting text boxes on a webpage

  - by C-UNIT

  So what I am trying to do is make an application (just for fun, not a lot of purpose), where when you launch it a interface comes up consisting of Username: textboxhere Password: textbox2here then a connect button, and when you fill out your information in the textboxs' then click Connect, it navigates to facebook.com and puts in your information that you defined in the textbox and logs you in. Any ideas guys?

  Read the article

• I asked a question about arrays before, but this one won't compile

  - by unit

  I asked about this array a little while ago, and I can't see what the problem is. Too tired. What have I done wrong? Basically, I am taking a string array and trying to check to see if it contains numbers or an x (ISBN number validation). I want to take the number from a given input (bookNum), check the input, and feed any valid input into a new array (book). At the line 'bookNum.charAt[j]==book[i]' I get the 'not a statement error'. What gives? String[] book = new String [ISBN_NUM]; bookNum.replaceAll("-",""); if (bookNum.length()!=ISBN_NUM) throw new ISBNException ("ISBN "+ bookNum + " must be 10 characters"); for (int i=0;i<bookNum.length();i++) { if (Character.isDigit(bookNum.charAt(i))) bookNum.CharAt[j]==book[i]; j++; if (book[9].isNotDigit()|| book[9]!="x" || book[9]!="X") throw new ISBNException ("ISBN " + bookNum + " must contain all digits" + "or 'X' in the last position");

  Read the article

• Beginner SQL question(s)

  - by unit

  I am two months in to an intro sql course, it's late at night, and I am drawing a blank. I have two tables, one customers, and one orders. I have to increase any customers credit limit by twenty five percent for all customers who have made two or more orders in which each order is more than the amount of 250.00. I get how to UPDATE CreditLimit * 1.25 and Cust with an order 250, but how the hell do I get it to check if they have made two orders over 250? Second question, we are just starting to take subqueries, and I am having a difficult time getting it into my skull. Another question posed by the prof of our class is to increase the credit limit of a customer who has an order that exceeds their credit limit. (Credit limit is on a customers table, order and amount are on an orders table). I then take that customer and UPDATE his CreditLimit +1000. Thanks for any help.

  Read the article

• '<=' operator is not working in sql server 2000

  - by Lalit

  Hello, Scenario is, database is in the maintenance phase. this database is not developed by ours developer. it is an existing database developed by the 'xyz' company in sql server 2000. This is real time database, where i am working now. I wanted to write the stored procedure which will retrieve me the records From date1 to date 2.so query is : Select * from MyTableName Where colDate>= '3-May-2010' and colDate<= '5-Oct-2010' and colName='xyzName' whereas my understanding I must get data including upper bound date as well as lower bound date. but somehow I am getting records from '3-May-2010' (which is fine but) to '10-Oct-2010' As i observe in table design , for ColDate, developer had used 'varchar' to store the date. i know this is wrong remedy by them. so in my stored procedure I have also used varchar parameters as @FromDate1 and @ToDate to get inputs for SP. this is giving me result which i have explained. i tried to take the parameter type as 'Datetime' but it is showing error while saving/altering the stored procedure that "@FromDate1 has invalid datatype", same for "@ToDate". situation is that, I can not change the table design at all. what i have to do here ? i know we can use user defined table in sql server 2008 , but there is version sql server 2000. which does not support the same. Please guide me for this scenario. **Edited** I am trying to write like this SP: CREATE PROCEDURE USP_Data (@Location varchar(100), @FromDate DATETIME, @ToDate DATETIME) AS SELECT * FROM dbo.TableName Where CAST(Dt AS DATETIME) >=@fromDate and CAST(Dt AS DATETIME)<=@ToDate and Location=@Location GO but getting Error: Arithmetic overflow error converting expression to data type datetime. in sql server 2000 What should be that ? is i am wrong some where ? also (202 row(s) affected) is changes every time in circular manner means first time sayin (122 row(s) affected) run again saying (80 row(s) affected) if again (202 row(s) affected) if again (122 row(s) affected) I can not understand what is going on ?

  Read the article

• Test Driven Development (TDD) in Visual Studio 2010- Microsoft Mondays

  - by Hosam Kamel

  November 14th , I will be presenting at Microsoft Mondays a session about Test Driven Development (TDD) in Visual Studio 2010 . Microsoft Mondays is program consisting of a series of Webcasts showcasing various Microsoft products and technologies. Each Monday we discuss a particular topic pertaining to development, infrastructure, Office tools, ERP, client/server operating systems etc. The webcast will be broadcast via Lync and can viewed from a web client. The idea behind the “Microsoft Mondays” program is to help you become more proficient in the products and technologies that you use and help you utilize their full potential.   Test Driven Development in Visual Studio 2010 Level – 300 (  Intermediate – Advanced ) Test Driven Development (TDD), also frequently referred to as Test Driven Design, is a development methodology where developers create software by first writing a unit test, then writing the actual system code to make the unit test pass.  The unit test can be viewed as a small specification around how the system should behave; writing it first helps the developer to focus on only writing enough code to make the test pass, thereby helping ensure a tight, lightweight system which is specifically focused meeting on the documented requirements. TDD follows a cadence of “Red, Green, Refactor.” Red refers to the visual display of a failing test – the test you write first will not pass because you have not yet written any code for it. Green refers to the step of writing just enough code in your system to make your unit test pass – your test runner’s UI will now show that test passing with a green icon. Refactor refers to the step of refactoring your code so it is tighter, cleaner, and more flexible. This cycle is repeated constantly throughout a TDD developer’s workday. Date:   November 14, 2011 Time:  10:00 a.m. – 11:00 a.m. (GMT+3)  http://www.eventbrite.com/event/2437620990/efbnen?ebtv=F   See you there! Hosam Kamel Originally posted at

  Read the article

• How to implement lockstep model for RTS game?

  - by user11177

  In my effort to learn programming I'm trying to make a small RTS style game. I've googled and read a lot of articles and gamedev q&a's on the topic of lockstep synchronization in multiplayer RTS games, but am still having trouble wrapping my head around how to implement it in my own game. I currently have a simple server/client system. For example if player1 selects a unit and gives the command to move it, the client sends the command [move, unit, coordinates] to the server, the server runs the pathfinding function and sends [move, unit, path] to all clients which then moves the unit and run animations. So far so good, but not synchronized for clients with latency or lower/higher FPS. How can I turn this into a true lockstep system? Is the right methodology supposed to be something like the following, using the example from above: Turn 1 start gather command inputs from player1 send to the server turn number and commands end turn, increment turn number The server receives the commands, runs pathfinding and sends the paths to all clients. Next turn receive paths from server, as well as confirmation that all clients completed previous turn, otherwise pause and wait for that confirmation move units gather new inputs end turn Is that the gist of it? Should perhaps pathfinding and other game logic be done client side instead of on the server, if so why? Is there anything else I'm missing? I hope someone can break down the concept, so I understand it better.

  Read the article

• techniques for an AI for a highly cramped turn-based tactics game

  - by Adam M.

  I'm trying to write an AI for a tactics game in the vein of Final Fantasy Tactics or Vandal Hearts. I can't change the game rules in any way, only upgrade the AI. I have experience programming AI for classic board games (basically minimax and its variants), but I think the branching factor is too great for the approach to be reasonable here. I'll describe the game and some current AI flaws that I'd like to fix. I'd like to hear ideas for applicable techniques. I'm a decent enough programmer, so I only need the ideas, not an implementation (though that's always appreciated). I'd rather not expend effort chasing (too many) dead ends, so although speculation and brainstorming are good and probably helpful, I'd prefer to hear from somebody with actual experience solving this kind of problem. For those who know it, the game is the land battle mini-game in Sid Meier's Pirates! (2004) and you can skim/skip the next two paragraphs. For those who don't, here's briefly how it works. The battle is turn-based and takes place on a 16x16 grid. There are three terrain types: clear (no hindrance), forest (hinders movement, ranged attacks, and sight), and rock (impassible, but does not hinder attacks or sight). The map is randomly generated with roughly equal amounts of each type of terrain. Because there are many rock and forest tiles, movement is typically very cramped. This is tactically important. The terrain is not flat; higher terrain gives minor bonuses. The terrain is known to both sides. The player is always the attacker and the AI is always the defender, so it's perfectly valid for the AI to set up a defensive position and just wait. The player wins by killing all defenders or by getting a unit to the city gates (a tile on the other side of the map). There are very few units on each side, usually 4-8. Because of this, it's crucial not to take damage without gaining some advantage from it. Units can take multiple actions per turn. All units on one side move before any units on the other side. Order of execution is important, and interleaving of actions between units is often useful. Units have melee and ranged attacks. Melee attacks vary widely in strength; ranged attacks have the same strength but vary in range. The main challenges I face are these: Lots of useful move combinations start with a "useless" move that gains no immediate advantage, or even loses advantage, in order to set up a powerful flank attack in the future. And, since the player units are stronger and have longer range, the AI pretty much always has to take some losses before they can start to gain kills. The AI must be able to look ahead to distinguish between sacrificial actions that provide a future benefit and those that don't. Because the terrain is so cramped, most of the tactics come down to achieving good positioning with multiple units that work together to defend an area. For instance, two defenders can often dominate a narrow pass by positioning themselves so an enemy unit attempting to pass must expose itself to a flank attack. But one defender in the same pass would be useless, and three units can defend a slightly larger pass. Etc. The AI should be able to figure out where the player must go to reach the city gates and how to best position its few units to cover the approaches, shifting, splitting, or combining them appropriately as the player moves. Because flank attacks are extremely deadly (and engineering flank attacks is key to the player strategy), the AI should be competent at moving its units so that they cover each other's flanks unless the sacrifice of a unit would give a substantial benefit. They should also be able to force flank attacks on players, for instance by threatening a unit from two different directions such that responding to one threat exposes the flank to the other. The AI should attack if possible, but sometimes there are no good ways to approach the player's position. In that case, the AI should be able to recognize this and set up a defensive position of its own. But the AI shouldn't be vulnerable to a trivial exploit where the player repeatedly opens and closes a hole in his defense and shoots at the AI as it approaches and retreats. That is, the AI should ideally be able to recognize that the player is capable of establishing a solid defense of an area, even if the defense is not currently in place. (I suppose if a good unit allocation algorithm existed, as needed for the second bullet point, the AI could run it on the player units to see where they could defend.) Because it's important to choose a good order of action and interleave actions between units, it's not as simple as just finding the best move for each unit in turn. All of these can be accomplished with a minimax search in theory, but the search space is too large, so specialized techniques are needed. I thought about techniques such as influence mapping, but I don't see how to use the technique to great effect. I thought about assigning goals to the units. This can help them work together in some limited way, and the problem of "how do I accomplish this goal?" is easier to solve than "how do I win this battle?", but assigning good goals is a hard problem in itself, because it requires knowing whether the goal is achievable and whether it's a good use of resources. So, does anyone have specific ideas for techniques that can help cleverize this AI? Update: I found a related question on Stackoverflow: http://stackoverflow.com/questions/3133273/ai-for-a-final-fantasy-tactics-like-game The selected answer gives a decent approach to choosing between alternative actions, but it doesn't seem to have much ability to look into the future and discern beneficial sacrifices from wasteful ones. It also focuses on a single unit at a time and it's not clear how it could be extended to support cooperation between units in defending or attacking.

  Read the article

• Trouble connecting a Ubuntu system to IPv6 tunnel over NAT

  - by John Millikin

  I'm trying to set up an IPv6 tunnel, via Hurricane Electric's tunnel-broker service. I've configured my system using their example commands: # $ipv4a = tunnel server's IPv4 IP # $ipv4b = user's IPv4 IP # $ipv6a = tunnel server's side of point-to-point /64 allocation # $ipv6b = user's side of point-to-point /64 allocation ip tunnel add he-ipv6 mode sit remote $ipv4a local $ipv4b ttl 255 ip link set he-ipv6 up ip addr add $ipv6b dev he-ipv6 ip route add ::/0 dev he-ipv6 And have configured my desktop to be in my NAT router's DMZ. The router is running Tomato firmware. But I can't ping any IPv6 services: $ ping6 -I he-ipv6 '2001:470:1f04:454::1' PING 2001:470:1f04:454::1(2001:470:1f04:454::1) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes From 2001:470:1f04:454::2 icmp_seq=1 Destination unreachable: Address unreachable From 2001:470:1f04:454::2 icmp_seq=2 Destination unreachable: Address unreachable I can ping my local address: $ ping6 -I he-ipv6 '2001:470:1f04:454::2' PING 2001:470:1f04:454::2(2001:470:1f04:454::2) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes 64 bytes from 2001:470:1f04:454::2: icmp_seq=1 ttl=64 time=0.037 ms 64 bytes from 2001:470:1f04:454::2: icmp_seq=2 ttl=64 time=0.039 ms I don't know much about routing, but results I found online suggested the output of ip -6 route and ip addr could be useful: $ ip -6 route 2001:470:1f04:454::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 fe80::/64 dev virbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 default dev he-ipv6 metric 1024 mtu 1480 advmss 1420 hoplimit 4294967295 $ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100 link/ether 00:1c:c0:a1:98:b2 brd ff:ff:ff:ff:ff:ff inet 192.168.1.10/24 brd 192.168.1.255 scope global eth1 inet6 fe80::21c:c0ff:fea1:98b2/64 scope link valid_lft forever preferred_lft forever 3: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 36:4c:33:ab:0d:c6 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 inet6 fe80::344c:33ff:feab:dc6/64 scope link valid_lft forever preferred_lft forever 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:76:62:6e:65:74 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 7e:29:5e:7c:ba:93 brd ff:ff:ff:ff:ff:ff 6: sit0: <NOARP> mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0 7: he-ipv6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN link/sit 24.130.225.239 peer 72.52.104.74 inet6 2001:470:1f04:454::2/64 scope global valid_lft forever preferred_lft forever inet6 fe80::1882:e1ef/128 scope link valid_lft forever preferred_lft forever

  Read the article

• How to stop a ICMP attack?

  - by cumhur onat

  We are under a heavy icmp flood attack. Tcpdump shows the result below. Altough we have blocked ICMP with iptables tcpdump still prints icmp packets. I've also attached iptables configuration and "top" result. Is there any thing I can do to completely stop icmp packets? [root@server downloads]# tcpdump icmp -v -n -nn tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 03:02:47.810957 IP (tos 0x0, ttl 49, id 16007, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 124, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811559 IP (tos 0x0, ttl 49, id 16010, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811922 IP (tos 0x0, ttl 49, id 16012, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812485 IP (tos 0x0, ttl 49, id 16015, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 126, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812613 IP (tos 0x0, ttl 49, id 16016, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812992 IP (tos 0x0, ttl 49, id 16018, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.813582 IP (tos 0x0, ttl 49, id 16020, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814092 IP (tos 0x0, ttl 49, id 16023, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814233 IP (tos 0x0, ttl 49, id 16024, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815579 IP (tos 0x0, ttl 49, id 16025, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815726 IP (tos 0x0, ttl 49, id 16026, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815890 IP (tos 0x0, ttl 49, id 16027, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 iptables configuration: [root@server etc]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ofis tcp -- anywhere anywhere tcp dpt:mysql ofis tcp -- anywhere anywhere tcp dpt:ftp DROP icmp -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination DROP icmp -- anywhere anywhere Chain ofis (2 references) target prot opt source destination ACCEPT all -- OUR_OFFICE_IP anywhere DROP all -- anywhere anywhere top: top - 03:12:19 up 400 days, 15:43, 3 users, load average: 1.49, 1.67, 2.61 Tasks: 751 total, 3 running, 748 sleeping, 0 stopped, 0 zombie Cpu(s): 8.2%us, 1.0%sy, 0.0%ni, 87.9%id, 2.1%wa, 0.1%hi, 0.7%si, 0.0%st Mem: 32949948k total, 26906844k used, 6043104k free, 4707676k buffers Swap: 10223608k total, 0k used, 10223608k free, 14255584k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 36 root 39 19 0 0 0 R 100.8 0.0 17:03.56 ksoftirqd/11 10552 root 15 0 11408 1460 676 R 5.7 0.0 0:00.04 top 7475 lighttpd 15 0 304m 22m 15m S 3.8 0.1 0:05.37 php-cgi 1294 root 10 -5 0 0 0 S 1.9 0.0 380:54.73 kjournald 3574 root 15 0 631m 11m 5464 S 1.9 0.0 0:00.65 node 7766 lighttpd 16 0 302m 19m 14m S 1.9 0.1 0:05.70 php-cgi 10237 postfix 15 0 52572 2216 1692 S 1.9 0.0 0:00.02 scache 1 root 15 0 10372 680 572 S 0.0 0.0 0:07.99 init 2 root RT -5 0 0 0 S 0.0 0.0 0:16.72 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.06 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 1:10.46 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:01.11 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 2:36.15 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.19 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 3:48.91 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.20 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 uname -a [root@server etc]# uname -a Linux thisis.oursite.com 2.6.18-238.19.1.el5 #1 SMP Fri Jul 15 07:31:24 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux arp -an [root@server downloads]# arp -an ? (77.92.136.194) at 00:25:90:04:F0:90 [ether] on eth0 ? (192.168.0.2) at 00:25:90:04:F0:91 [ether] on eth1 ? (77.92.136.193) at 00:23:9C:0B:CD:01 [ether] on eth0

  Read the article

• Network Bridging for WiFi-to-Ethernet in linux

  - by shakaran

  It is possible Network Bridging for WiFi-to-Ethernet in linux instead of Ethernet-to-Ethernet? I have a CentOS 6.3 machine. I am using KVM and I want perform a brigde for virtualize more machines. This machine is connected only via wireless connection and it doesn't have a ethernet connection. So, I did a bridge over the WiFi interface like: # cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE="br0" NM_CONTROLLED="yes" ONBOOT=yes TYPE=Bridge BOOTPROTO=none IPADDR=192.168.1.50 PREFIX=24 GATEWAY=192.168.1.1 DNS1=8.8.8.8 DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System br0" Then I edit my wireless conection like: # cat /etc/sysconfig/network-scripts/ifcfg-mywireless ESSID="mywireless" MODE=Managed KEY_MGMT=WPA-PSK WPA_ALLOW_WPA2=yes CIPHER_PAIRWISE=CCMP CIPHER_GROUP=CCMP TYPE=Wireless #BOOTPROTO=none #IPADDR=192.168.1.50 #PREFIX=24 #GATEWAY=192.168.1.1 #DNS1=8.8.8.8 #DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="Auto mywireless" UUID=874***** ONBOOT=yes LAST_CONNECT=1355923469 BRIDGE=br0 After, I restart the network: # /etc/init.d/network restart Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface Auto_mywireless: Error: Unknown connection: 874***** [FAILED] Bringing up interface br0: [ OK ] But as you can see, it show a error. My ifconfig output shows now: # ifconfig br0 Link encap:Ethernet HWaddr 6E:20:AD:CE:D8:AB inet addr:192.168.1.50 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6c20:adff:fece:d8ab/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:6393 (6.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:432 errors:0 dropped:0 overruns:0 frame:0 TX packets:432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:62433 (60.9 KiB) TX bytes:62433 (60.9 KiB) ra0 Link encap:Ethernet HWaddr 00:22:F7:2B:87:E5 inet addr:192.168.1.42 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::222:f7ff:fe2b:87e5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:46 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:487894880 (465.2 MiB) TX bytes:148136473 (141.2 MiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:5B:30:9A inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:70 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:5838 (5.7 KiB) But this doesn't give internet connection and I loss access to 192.168.1.50. So, it is possible setup this networking bridge WiFi-to-Ethernet?

  Read the article

• Configuring Windows 2003 As A Router

  - by Sean M

  I am trying to configure a Windows 2003 server to act as a router, so that the two subnetworks that I'm dealing with can communicate with one another without NAT. I am mostly sure that I have configured Windows 2003 incorrectly, and I'm finding it very difficult to drill down through Google results to something helpful. I have a 192.168.1.0/24 network that is my "production" network (in the sense that I'm in trouble if I screw it up) and a 10.0.0.0/8 network that is my test network. The 192.168.1.0 network is ruled by a gateway whose routing table looks like this (my address redacted): The Windows 2003 server, "prime," is multihomed. Its network adapters are at 192.168.1.122, (as seen above), 10.0.0.1, and 10.0.0.2. I added the Routing and Remote Access role to it, and enabled LAN routing. I do not have it using RIP or other routing protocols. Its current routing table is shown below. To me, it looks like all of the right routes are there for traffic to pass between the 192.168.1.0 network and the 10.0.0.0 network. However, traffic does not pass. The 10.0.0.11 and .12 clients cannot be contacted from the 192.168.1.0 network. When I use traceroute to try to get to them, the trace gets to the Windows 2003 server's 192.168.1.122 address, then produces nothing but "* * *" timeouts. When I try to traceroute to 192.168.1.1 from a 10.0.0.0-network client, I get "destination host unreachable." However, I know that the routing is working at least a little, because from the 192.168.1.0 network, I can connect to the Windows server just fine by referring to it as 10.0.0.1. What static routes would allow me to contact 10.0.0.11 and .12 from the 192.168.1.0 network? Is it possible to tell the Windows server "since you are a DHCP/DNS server, you already know routes to get to machines that are getting IP addresses from you, please add those to your routing table" ? Will using RIP or OSPF on the Windows server actually be helpful in this situation?

  Read the article

• Strange traceroute to msdn.microsoft.com

  - by Jasper

  The problem is I could not view any msdn.microsoft.com/* site and the main site itself on my Ubuntu box on Google Chrome browser. Error is: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. When I run traceout I get different result: Here is simple one: traceroute msdn.microsoft.com traceroute to msdn.microsoft.com (65.55.11.235), 30 hops max, 60 byte packets 1 10.0.0.138 (10.0.0.138) 0.121 ms 0.131 ms 0.128 ms 2 192.168.0.1 (192.168.0.1) 1.730 ms 1.724 ms 2.024 ms 3 bzq-179-37-1.static.bezeqint.net (212.179.37.1) 18.314 ms 19.277 ms 20.694 ms 4 bzq-218-227-250.red.bezeqint.net (81.218.227.250) 22.806 ms 23.651 ms 24.820 ms 5 bzq-179-75-198.static.bezeqint.net (212.179.75.198) 26.650 ms 27.533 ms 28.791 ms 6 * * * 7 bzq-179-124-122.static.bezeqint.net (212.179.124.122) 76.032 ms 72.968 ms 74.660 ms 8 igblmdistc7504.uk.msft.net (195.66.224.140) 75.708 ms 76.797 ms 78.257 ms 9 ge-5-1-0-0.lts-64cb-1a.ntwk.msn.net (207.46.42.227) 80.125 ms 81.336 ms 82.671 ms 10 ge-7-0-0-0.nyc-64cb-1a.ntwk.msn.net (207.46.47.20) 179.232 ms so-7-1-0-0.ash-64cb-1b.ntwk.msn.net (213.199.144.158) 162.508 ms 163.223 ms 11 xe-0-0-1-0.co1-96c-1b.ntwk.msn.net (207.46.45.29) 227.964 ms ge-7-0-0-0.co1-64c-1b.ntwk.msn.net (207.46.40.90) 228.226 ms xe-0-0-1-0.co1-96c-1b.ntwk.msn.net (207.46.45.29) 212.781 ms 12 10.22.8.54 (10.22.8.54) 215.046 ms xe-5-2-0-0.co1-96c-1a.ntwk.msn.net (207.46.40.167) 214.825 ms 10.22.8.58 (10.22.8.58) 213.251 ms 13 10.22.8.62 (10.22.8.62) 212.745 ms 213.827 ms 10.22.8.50 (10.22.8.50) 215.655 ms 14 10.22.8.62 (10.22.8.62) 211.665 ms !X 10.22.8.50 (10.22.8.50) 214.491 ms !X 10.22.8.54 (10.22.8.54) 218.471 ms !X Line 1,2 : It's me Line from 3-7: It's my Internet provider Line 8 and on: I think I hit MS servers WTF line 12-14 ????? 10.22.8.x ???? then I run this traceroute: sudo traceroute -T msdn.microsoft.com traceroute to msdn.microsoft.com (65.55.11.235), 30 hops max, 60 byte packets 1 10.0.0.138 (10.0.0.138) 0.109 ms 0.127 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 65.55.11.235 (65.55.11.235) 16.019 ms 17.364 ms So I hit MSDN web site already at 6 hop ! WTF ??? This is host -a msdn.microsoft.com from me: host -a msdn.microsoft.com Trying "msdn.microsoft.com" ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 19522 ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;msdn.microsoft.com. IN ANY ;; ANSWER SECTION: msdn.microsoft.com. 3274 IN CNAME msdn.microsoft.akadns.net. msdn.microsoft.akadns.net. 600 IN A 65.55.11.235 Received 91 bytes from 127.0.0.1#53 in 108 ms Could someone help me understand and fix it ??

  Read the article

• SBS_LOGIN_SCRIPT not updating the ESET NOD32 clients versions

  - by Orr Yoffe

  I used the following Login script (with version 4.2 of NOD32). After updating the ERA and the Server to version 5.0.122.0, I've updated my script to the following, resulting in alot of nothing. Any suggestions whats wrong here? rem \SBS\Clients\Setup\setup.exe /s SBS @echo off net time \s2008 /SET /Y net use P: \s2008\public /Y net use u: \s2008\users\%username% /Y net use L: \s2008\clientapps /Y call \s2008\eset\install_eav.bat call \s2008\eset\UpgVer-Eset5.0.bat exit

  Read the article

• How can I lower the volume of my USB headphones?

  - by Jay Bazuzi

  Yes, I really am asking how to turn down the volume. But first, some more detail: My headphones are http://www.edimensional.com/product_info.php?cPath=22&products_id=122 They are really loud. I usually have to keep them on the lowest setting. If the source material is louder than average, I have to lower the output volume in the player software. Is there a way to can adjust the Windows 7 volume settings so that my normal listening volume is around 50% instead?

  Read the article

• haproxy backend default location

  - by magd1

  If you go to www.company.com, I want it to redirect to /something/something on my server, but the URL still shows www.company.com Is this possible in haproxy? backend new_marketing_server *** set default URL to /something/something*** mode http balance roundrobin timeout server 10m option httpclose server server1 10.86.151.142:80 minconn 32000 maxconn 3200 check port 80 inter 2000 server server2 10.122.13.189:80 minconn 32000 maxconn 3200 check port 80 inter 2000

  Read the article

• rsync error on Downloading

  - by Chandan

  Sir I am trying to setup a Rsyncmirror on my mount drive /mnt/Mirror/ubuntu_mirror .so I am trying the command rsync -a --bwlimit=128 rsync://archive.ubuntu.com/ubuntu /mnt/Mirror/ubuntu_mirror but it shows error rsync: getaddrinfo: archive.ubuntu.com 873: Name or service not known rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9] can anyone help me.. Thanks.

  Read the article

• How TiVo is messing up customer support.

  - by James Fleming

  Ok,  So I've gotten a TiVo and overall, I'm happy, but there have been issues and I suspect I've a defective unit. - Now the nice folks after many service calls were happy to swap it out, and to ensure continuity of service, they sent me a new unit (after a $109 deposit).  That was yesterday. Today, when we go to watch a little TV, and wait for our replacement unit to arrive we find our TiVo service has been suspended. WTF? They have an exchange program, but your unit your waiting to exchange is as dead as a doornail until the replacement arrives. How hard is it to keep the old unit active for an extra week? Here is the exchange w/Tivo below... You are currently number 1 in the queue. We apologize for the delay. We will assign you to an agent as soon as one is available.The average amount of time a customer has to wait is 00:13.  Kaylene (Listening)  Kaylene: Thank you for contacting TiVo! My name is Kaylene. So that I may better assist you, are you an existing customer?  james Fleming: yes I am, but I'm now having second thoughts about being one    Kaylene: Thank you for verifying your information. How may I assist you today James?  james Fleming: I've been having issues w/a tivo box & I'm getting a replacement sent out to me (after paying an additional deposit) and now my current unit is no longer activated  Kaylene: I can help you today!  Kaylene: When we process an exchange we do transfer over the service to the replacement box so it is active and ready to go when you receive it.  james Fleming: which is to say you also make my current box worthless until such time I receive a new box?!?!?  Kaylene: I apologize that your original box was deactivated so we could activate your replacement box.  james Fleming: Why on Earth would I bother to pay in advance for a new box if you were going to kill my existing box.  Kaylene: What features are you needing to use on your current box?  james Fleming: I need to be able to access my netflix subscription (if I'm lucky enough to have it work without rebooting)  Kaylene: Can I have you verify the TiVo Service Number of your TiVo box please?  james Fleming: 7460011906979b4  Kaylene: We have your current box temporary service but not all features are available with temporary service as it is not paid for service.  Kaylene: If you like I can transfer your service back to your current box for now. Then once you receive the new box you will have to call in and have the service transferred back to the new box.  james Fleming: Not paid for? Let's see> one tivo box + 3 year service plan + monthly service + $109 deposit on a second box = what?  Kaylene: Would you like me to transfer your service back to your current box?  james Fleming: Yes - that would be helpful  Kaylene: All you will need to do is contact us again once you receive the new box so we can transfer it back.  Kaylene: I have put your service back on TiVo box 7460011906979b4.  james Fleming: What would also be helpful is your firm informing me to how you'd be cutting service in the interim.  james Fleming: Again - I opted to pay to have a second box delivered BEFORE returning the box I have - thus trying to have a continuity of service..  Kaylene: This is not something we normally do so it is important when you contact us to transfer the service back to the new box when you receive it that you reference this case number: 110622-006089.  Kaylene: I apologize about the inconvenience. You may need  force a few connections for the box to recognize the service again.  james Fleming: If it's not something you normally do than WHY would you have a $109 fee and a term for the service.  james Fleming: I am not mad at you, but your company is not impressing me and I'm blogging about this experience  Kaylene: Again I apologize about the inconvenience but you should be good to go now. Is there anything else I can help you with today?  james Fleming: so I need to go through the re-actviate process or is that somethign you do  Kaylene: When you receive the new TiVo box you need to contact us so we can transfer the service to the new box for you.  james Fleming: sure  Kaylene: Is there anything else I can help you with today James?  james Fleming: Nope - please email this transcript to me  Kaylene: I apologize but we do not have the ability to e-mail you a copy of this transcript. You can view it online at  http://www.tivo.com when you sign into your account or you can copy and paste it now to save it.  Kaylene: Thank you for contacting TiVo today. Your reference number for our conversation is 110622-006089. You can save this for your records, and if necessary, provide this to a later agent to pull up what we discussed. There will be a brief satisfaction survey emailed to you. We would appreciate any feedback on your TiVo Chat Support experience today.  Kaylene: Thank you for using TiVo Chat and have a great day James! Good-bye.  Kaylene has disconnected.

  Read the article

• TDD - A question about the approach

  - by k25

  I have a question about TDD. I have always seen the recommendation that we should first write unit tests and then start writing code. But I feel that going the other way is much more comfortable (for me) - write code and then the unit tests, because I feel we have much more clarity after we have written the actual code. If I write the code and then the tests, I may have to change my code a little bit to make it testable, even if I concentrate much on creating a testable design. On the other hand, if I write the tests and then the code, the tests will change pretty frequently as and when the code shapes up. My questions are: 1) As I see a lot of recommendations to start writing tests and then move on to coding, what are the disadvantages if I do it the other way - write code and then the unit tests? 2) Could you please point me to some links that discuss about this or recommend some books (TDD)?

  Read the article

• A Quantity class with units

  - by Ryan Ohs

  Goals Create a class that associates a numeric quantity with a unit of measurement. Provide support for simple arithmetic and comparison operations. Implementation An immutable class (Could have been struct but I may try inheritance later) Unit is stored in an enumeration Supported operations: Addition w/ like units Subtraction w/ like units Multiplication by scalar Division by scalar Modulus by scalar Equals() >, >=, <, <=, == IComparable ToString() Implicit cast to Decimal The Source The souce can be downloaded from Github. Notes This class does not support any arithmetic that would modify the unit. This class is not suitable for manipulating currencies. Future Ideas Have a CompositeQuantity class that would allow quantities with unlike units to be combined. Similar currency class with support for allocations/distributions. Provide conversion between units. (Actually I think this would be best placed in an external service. Many situations I deal with require some sort of dynamic conversion ratio.)

  Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >