Search Results

Search found 2785 results on 112 pages for 'otn dd'.

Page 78/112 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• How do I execute a command before kickstart parses ks.cfg?

  - by Crazy Chenz

  How do I execute a command before kickstart parses ks.cfg? My specific problem is that I want to install redhat into a tmpfs by telling kickstart: part / --fstype ext3 --size 1000 --maxsize 4000 --ondisk loop1 I've tried doing: %pre #!/bin/sh mkdir /tmp-root mount -t tmpfs tmpfs /tmp-root dd if=/dev/zero of=/tmp-root/tmp-root.img bs=4096 count=1000000 losetup /dev/loop1 /tmp-root/tmp-root.img but that is not done early enough. Ugh! Update: I'm beginning to think it has nothing to do with being done early enough. I believe it has to do with anaconda and kudzu not thinking that a loopback device is a valid device. I'm not a python guy, so the idea of hacking up the kickstart code sucks! -Vinnie

  Read the article

• How rotate TomCat 6 logs on Windows every night

  - by Danilo Brambilla

  Hi all, our TomCat 6 is running on a Windows Server 2003 server producing some logs on Program Files\Apache Software Foundation\Tomcat 6.0\logs folder. Only catalina.YYYY-MM-DD.log rotates every night. Admin. Host-Manager. Jakarta. LocalHost. Manager. stderr. stdout does not roate and are dated at the last server restart date. These files are most empty and always locked. How can I set TomCat to rotate all these logs every night (if possible without server/service restart)? Thank you in advance for help.

  Read the article

• Cannot format SD memory card

  - by cool

  Hello everyone I have a SD memory card which is of local manufacturer it allows to read & copy from it but not write as it is now write-protected so i want to format that card but could not. To format this card I have tried 1) DD command 2) mkfs -f vfat command 3) creating registry entry under storage device policy in window with write value 0 4) disk part command in window to clear attributes in which it show all attributes are clear ie no write protection 5) I format card in windows through control panel - administrative tools- computer management - disk management, then it show as formatted but when I tried to create new partition it give CYCLIC REDUNDANCY CHECK error 6) I downloaded a format utility from transcend site and formatted first it shows write protected again doing format it formats and tells to remove and reinsert after reinsertion it shows the previous data as it is

  Read the article

• zram trimming by writing zero pages

  - by qdot

  I'm using ZRAM as a backing block device for /tmp filesystem in the following manner: echo 8000000000 > /sys/block/zram0/disksize mkfs.ext4 -O dir_nlink,extent,extra_isize,flex_bg,^has_journal,uninit_bg -m0 \ -b 4096 -L "zram0" /dev/zram0 mount -o barrier=0,commit=240,noatime,nodev,nosuid /dev/zram0 /tmp chmod aogu+rwx /tmp It works out reasonably well for me - however, there is an issue here - when files are removed, they are not zero'ed, so the ZRAM does not remote the compressed pages. Obviously running dd if=/dev/zero of=/tmp/ZERO bs=1M count={free-space-some-rest}; rm /tmp/ZERO clears it up in the ZRAM - it gets notified of zero-pages and shrinks the store. How can I get ext4 to zero used pages on delete? Also, any other suggestions on how to optimize it?

  Read the article

• Should I install Windows 7 on a 3 years old PC?

  - by Jitendra vyas

  This is my PC configuration, Should I upgrade my Windows XP to Windows 7. Currently I'm using Windows XP SP3 32 bit. Now will I get same performance or better performance or bad performance if I install Windows 7 on this system? Or would sticking with XP be better? Memory (RAM): 1472 MB DDR RAM (not DDR 2) CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1398.7 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Network Adapters: Bluetooth Device (Personal Area Network) | WAN (PPP/SLIP) Interface Hard Disks: 300 GB SATA HDD Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA :

  Read the article

• Set up router to vpn into proxy server

  - by NKimber

  I have a small network with a single LinkSys router connected to broadband in US via Comcast. I have a VPN proxy server account that I can use with a standard Windows connection, allowing me to have a geographic IP fingerprint in Europe, this is useful for a number of purposes. I want to setup a 2nd router that automatically connects via VPN to this proxy service, so any hardware that is connected to router 2 looks as though it is originating network requests in Europe, and any hardware connected to my main router has normal Comcast traffic (all requests are originating from USA). My 2nd router is a LinkSys WRT54G2, I'm having trouble getting this configured. Question, is what I'm trying to do even feasible? Should the WRT54G2 be able to do this with native functionality? Would flashing it with DD-WRT allow me to achieve my objectives? Any help/suggestions much appreciated. Neil

  Read the article

• How could I easily pack a directory to an ext4 loop partition image?

  - by Alvin Wong

  I would like to pack the content of a directory into an ext4 partition image easily, without mounting a loop device. Background: I am building a version of Android which will mount system partitions as a loop device for ARM. Though I can create those partition images by hand using loop devices, it is very troublesome. I want to use an sh script to automatically do the work, and without needing to loop mount the dd-created image and use cp -rp. The best is to directly pack the files into an image file. Question: Is there any simple command-line tools without needing loop mount and root permission that can pack files into an ext4 partition image?

  Read the article

• selective backup script in bash

  - by Sake

  Hi, I've been using this simple command (that's all I can do :) to backup the whole tree from my user data in NAS server for a year. cp -r /STORAGE /BACKUP-STORAGE/YYYY-MM-DD Unfortunately, after a year of service. My user start filling the spaces with lot of photo and cliparts (jpg, gif, bmp) And that start to make my backup process get much slower. The space is also a big issue. Now I no longer have enough space for a week-long daily backup set. I think I want to change from backup everything to backup only non-image data. How can I exclude jpg, gif, and bmp from the backup ? It's quite easy with DOS XCOPY command, but I really have no idea how to do that in bash. Thanks

  Read the article

• How is my ISP DNS hijacking AFTER all these precautions?

  - by user973917

  In IE9 when I search for anything my ISP hijacks google search and I get this result. To add complication to this I've already changed the default DNS servers (OpenDNS) months ago. This only happens in IE9; even after machine reboots and cache flushing. I even have my router (dd-wrt) intercepting all requests for DNS and I am still getting this result. I have all extensions disabled and there are no toolbars. This is IE9 from M$. This is not malware; it happens all machines with IE installed (even IE7/8).

  Read the article

• How do you change your Airport or Ethernet MAC address in Mac OS X 10.6?

  - by Dave Gallagher

  I have a MacBook Pro and would like to set a custom MAC address for either my Airport WiFi card, or Ethernet port. In older versions of Mac OS X, you could do it like this: $ sudo ifconfig en0 ether 00:11:22:33:44:55 // Ethernet $ sudo ifconfig en1 lladdr AA:BB:CC:DD:EE:FF // Airport For it to work on Airport, you'd have to power it on (e.g. $ sudo ifconfig en1 up), ensure it's not connected to any wireless network, and execute the command. I'm aware such a change won't propagate across reboots. Unfortunately, this doesn't work on Mac OS X 10.6.6 anymore. Apple appears to have removed the functionality (the command fails silently). Does anyone have any idea how to do it? Thanks for any help you can offer! :)

  Read the article

• Find DNS server automatically

  - by jdickson

  I've got a Windows 2012 server set up as a domain controller and DNS server in my basement. On my laptop, if I set it to use the IP address of my server as the DNS server, then it works as expected. The problem with that is that I use my laptop outside my home network and I need to switch it back to automatic. Setup is like this: ISP Router running DD-WRT Win 2012 DC/DNS and other network computers How can I have my laptop find the DNS server automatically instead of using my ISP's DNS servers?

  Read the article

• How can I selectively increase latency? E.g. throttle games

  - by Arcymag

  Basically, I want networked games to run poorly on a network, but I want everything else to run smoothly. I would also appreciate advice on blocking games in general. As far as I can tell, there's a few ways to completely prevent an internet game from running: Blocking entirely via DNS configuration (e.g. hosts file), or router DNS configuration Blocking entirely via a separate DNS server Blocking the application, by uninstalling or some kind of access control Blocking the application by automatically killing the process every once in a while Blocking the application by corrupting files periodically However, I would like a more subtle way to block a program. Something that either: Increases latency (would this be doable through some kind of QoS like what DD-WRT offers?) Increases latency by using a special routing configuration for specific target IPs Throttle other systems resources, such as memory, IO, or CPU Screw around with keyboard configurations when a game is launched I would like this to work on MacOSX and Windows, but Linux would be great too. FYI I don't have a kid, but I was brainstorming with some friends and parents.

  Read the article

• Help make sense of a KillDisk error/log

  - by user284194

  I have a hard drive that I've been trying to reformat. I tried reformatting it in the windows XP and 7 installers, and in an Ubuntu live cd with gparted. I tried using dd to 'zero' the drive as well with no success. Finally I ran across KillDisk after a search. I tried to zero the disk again with KillDisk and after 8 hours of zeroing I get the following errors in the log: ----------------------------------------Erase Session Begin--------------------------------------- 2010-03-23 19:35:54 Active@ KILLDISK for Windows Build 5.1.39 started Target: WDC WD2500KS-00MJB0 232.9 GB Located on: WDC WD2500KS-00MJB0 (Serial number: WD-WCANK9604799) Erase method: One Pass Zeros (1 pass) Passes: 1 Bad (unwritable) sectors detected from 1701 to 488397167 on Hard Disk 1. Error (the handle is invalid) refreshing device Hard Disk 1. Error (the handle is invalid) reading sector 0 on 81h. 2010-03-24 02:28:25 Total number of erased device(s): 0, partition(s): 0 -----------------------------------------Erase Session End---------------------------------------- Is the drive dead?

  Read the article

• Ubuntu issues when moving hard disk to new system

  - by Tim

  I'm working on a legacy project with a small single board computer running Ubuntu 10.04 on a compact flash card. I need to be able to save away a working image (via dd) and copy said image to other compact flash cards for use in other single board computers (with identical hardware) I'm able to copy the image to other flash cards and bootup on other systems no problem. But I'm seeing strange behavior. For instance, I can't use sudo on the new system (“sudo: must be setuid root”). I've gone down the path of trying to fix this, but have run into a slew of other issues. General question is: what do I need to be aware of when moving a hard disk containing Ubuntu (in my case a compact flash card) to another computer? I was hoping it would be seamless to Ubuntu since it's moving to a system with identical hardware. Is there something that needs to be done to make it "portable"?

  Read the article

• Broadcast UDP over VPN

  - by ibmz

  I have OpenVPN configured and have 5 dd-wrt router clients. I would like the machines on those routers to be-able to UDP Broadcast across all 5 networks. I cannot bridge the interfaces(to my knowledge) because each router needs to be able to operate on its own should the VPN connection die (dhcp needs to work). currently each router has its own /24 (eg 192.168.1.x) network. Is there a way to use IPTables to mangle the udp and forward them to all VPN Clients? To summarize i need 1)to UDP broadcast to all routers and their clients 2)for all routers to be able to operate independently should the VPN go down

  Read the article

• My IIS server won't serve SSL sites to some browsers

  - by sbleon

  (Update: This is now cross-posted at http://stackoverflow.com/questions/3355000. This is the more appropriate forum, but StackOverflow gets a lot more traffic.) I've got an IIS 6.0 server that won't serve pages over SSL to some browsers. In Webkit-based browsers on OS X 10.6, I can't load pages at all. In MSIE 8 on Windows XP SP3, I can load pages, but it will sometimes hang downloading images or sending POSTs. Working: Firefox 3.6 (OS X + Windows) Chrome (Windows) Partially Working: MSIE 8 (works sometimes, but hangs up, especially on POSTs) Not Working: Chrome 5 (OS X) Safari 5 (OS X) Mobile Safari (iOS 4) On OS X (the easiest platform for me to test on), Chrome and Firefox both negotiate the same TLS Cipher, but Chrome hangs on or after the post-negotiation handshake. Chrome packet capture (via ssldump): 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 cipher suites Unknown value 0xc00a Unknown value 0xc009 Unknown value 0xc007 Unknown value 0xc008 Unknown value 0xc013 Unknown value 0xc014 Unknown value 0xc011 Unknown value 0xc012 Unknown value 0xc004 Unknown value 0xc005 Unknown value 0xc002 Unknown value 0xc003 Unknown value 0xc00e Unknown value 0xc00f Unknown value 0xc00c Unknown value 0xc00d Unknown value 0x2f TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 Unknown value 0x35 TLS_RSA_WITH_3DES_EDE_CBC_SHA Unknown value 0x32 Unknown value 0x33 Unknown value 0x38 Unknown value 0x39 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.3106 (0.2620) S>C Handshake ServerHello Version 3.1 session_id[32]= bb 0e 00 00 7a 7e 07 50 5e 78 48 cf 43 5a f7 4d d2 ed 72 8f ff 1d 9e 74 66 74 03 b3 bb 92 8d eb cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL Certificate ServerHelloDone 1 3 0.3196 (0.0090) C>S Handshake ClientKeyExchange 1 4 0.3197 (0.0000) C>S ChangeCipherSpec 1 5 0.3197 (0.0000) C>S Handshake [hang, no more data transmitted] Firefox packet capture: 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 resume [32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipher suites Unknown value 0xff Unknown value 0xc00a Unknown value 0xc014 Unknown value 0x88 Unknown value 0x87 Unknown value 0x39 Unknown value 0x38 Unknown value 0xc00f Unknown value 0xc005 Unknown value 0x84 Unknown value 0x35 Unknown value 0xc007 Unknown value 0xc009 Unknown value 0xc011 Unknown value 0xc013 Unknown value 0x45 Unknown value 0x44 Unknown value 0x33 Unknown value 0x32 Unknown value 0xc00c Unknown value 0xc00e Unknown value 0xc002 Unknown value 0xc004 Unknown value 0x96 Unknown value 0x41 TLS_RSA_WITH_RC4_128_MD5 TLS_RSA_WITH_RC4_128_SHA Unknown value 0x2f Unknown value 0xc008 Unknown value 0xc012 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA Unknown value 0xc00d Unknown value 0xc003 Unknown value 0xfeff TLS_RSA_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.0983 (0.0497) S>C Handshake ServerHello Version 3.1 session_id[32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL 1 3 0.0983 (0.0000) S>C ChangeCipherSpec 1 4 0.0983 (0.0000) S>C Handshake 1 5 0.1019 (0.0035) C>S ChangeCipherSpec 1 6 0.1019 (0.0000) C>S Handshake 1 7 0.1019 (0.0000) C>S application_data 1 8 0.2460 (0.1440) S>C application_data 1 9 0.3108 (0.0648) S>C application_data 1 10 0.3650 (0.0542) S>C application_data 1 11 0.4188 (0.0537) S>C application_data 1 12 0.4580 (0.0392) S>C application_data 1 13 0.4831 (0.0251) S>C application_data [etc] Update: Here's a Wireshark capture from the server end. What's going on with those two much-delayed RST packets? Is that just IIS terminating what it perceives as a non-responsive connection? 19 10.129450 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=3 TSV=699250189 TSER=0 20 10.129517 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [SYN, ACK] Seq=0 Ack=1 Win=16384 Len=0 MSS=1460 WS=0 TSV=0 TSER=0 21 10.168596 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSV=699250189 TSER=0 22 10.172950 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Hello 23 10.173267 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 24 10.173297 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 25 10.385180 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=2897 Win=524280 Len=0 TSV=699250191 TSER=163006 26 10.385235 10.100.xxx.xx 67.249.xxx.xxx TLSv1 Server Hello, Certificate, Server Hello Done 27 10.424682 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=4215 Win=524280 Len=0 TSV=699250192 TSER=163008 28 10.435245 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Key Exchange 29 10.438522 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Change Cipher Spec 30 10.438553 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=421 Win=65115 Len=0 TSV=163008 TSER=699250192 31 10.449036 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Encrypted Handshake Message 32 10.580652 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=458 Win=65078 Len=0 TSV=163010 TSER=699250192 7312 57.315338 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50644 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0 19531 142.316425 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [RST, ACK] Seq=4215 Ack=458 Win=0 Len=0

  Read the article

• Dumping a Linux console scrollback buffer?

  - by Gerald Combs

  We would like to save the output of a program run on a Linux console which spans many lines. Unfortunately it wasn't logged or run under screen, or any other way that lets us easily capture the output. The best method we've been able to come up with so far is: Log into the machine via a separate SSH session In the console session, page to the top of the buffer Repeat: In the SSH session, run "cat /dev/vcs >> screendump.txt" In the console session, page down one screen Dump the final screen in the SSH session Is there a better way? It seems like if the VC memory were contiguous and you knew where it was you could use dd to pull the console text directly out of kernel memory and into a file.

  Read the article

• How to extend Wi-Fi signal across rooms?

  - by Sriram Krishnan

  I moved into a new place and my old Wi-Fi router just doesn't have the range to get into all the rooms. I've been investigating a lot of options and I'm wondering what other folks have done here. Moving the current location of my primary Wi-Fi router is not an option thanks to our cable provider and our landlord. Buy a bigger, beefier router (seems expensive). If so, should I go for one of those draft 802.11n ones to avoid microwave/other Wi-Fi router interference? Set up a router with DD-WRT as a repeater Leech the neighbors' open Wi-Fi access point. Alright, I was kidding about the last one but I'm genuinely curious as to what my best option is.

  Read the article

• serving static assets via http is really slow compared to sshfs (apache2/nginx)

  - by s1lv3r

  After migrating to a new VPS I had some users complaining about slow loading images on their sites. After creating some test files with dd I realized that I can download all files via sshfs with full speed while downloads via web are painfully slow. The larger the file is and the longer the transfer takes, the slower the transfer speed gets. I thought I had some problems with Apache and just spend the whole evening with replacing Apache2 against nginx for static file serving - with no effect at all. No I/O wait states in top. Tons of RAM free, no high CPU utilization and hdparm shows a decent I/O performance at all times. I just have no idea anymore, what's happening on this server. This is a link to a demo file: http://master.dealux.de/file.tgz Anybody an idea what I can check out?

  Read the article

• NTFS write speed really slow (<15MB/s) on Ubuntu

  - by Zulakis

  When copying large files or testing writespeed with dd, the max writespeed I can get is about 12-15MB/s on drives using the NTFS filesystem. I tested multiple drives (all connected using SATA) which all got writespeeds of 100MB/s+ on Windows or when formatted with ext4, so it's not an alignment or drive issue. top shows high cpu usage for the mount.ntfs process. AMD dual core processor (2.2 GHz) Kernel version: 3.5.0-23-generic Ubuntu 12.04 ntfs-3g version: both 2012.1.15AR.1 (Ubuntu default version) and 2013.1.13AR.2 How can I fix the writespeed?

  Read the article

• Recover data from an ''unpartitioned'' hard drive

  - by Rafael S. Calsaverini

  I'm trying to recover data from a hdd for a friend from work. He was using it on an old win98 PC (so I guess it was a FAT 16 filesystem). When he installed the drive on a new PC his Windows XP can't recognize the filesystem and give an error message saying that the drive is unformatted. I tried to mount the hdd under linux but no partitions appear to be associated with the drive (I have only /dev/sdb associated with that drive and no /dev/sdb1 or sdb2 etc). I've found many articles on the web on how to recover partitions (with scripts like dd and ddrescue) but how do I make it when I have no partitions and the system say my drive is unpartioned? Is it possible to create a new partition without loosing the data?

  Read the article

• Need to get a file written to a floppy.

  - by dboarman-FissureStudios

  I asked this question over on SO. I have tried dd if=kernel.sys of=/dev/fd0 bs=512 seek=1 to get this file to write to the floppy. It is a kernel shell that must be written to the sector immediately following the bootsector of a disk to boot the PC. No matter what I've tried, for some reason, kernel.sys is not writing to the floppy. I know the bootstrap loader is being written and executed. However, it cannot find the kernel to load the shell. Any ideas on what I am doing wrong? I mean, really, how is it so difficult to get this file written to a floppy? OpenSUSE 11.2

  Read the article

• Refresh devices - reconnect CF card drive by script (unplug-plug equivalent)

  - by Chris

  Hello I plug a completely clean CF-card into my USB card-writer. Then I dd a mbr block of 512 bytes size to the device, which contains the partition table and the definition of one partition. Problem: While "fdisk -l /dev/sdx" correctly displays the partition, it happens that there is no device like "/dev/sdx1" after these operations (as it was not present before). Unplugging and plugging the card-writer solves the problem and makes the device(s) appear. Since I use this procedure in a script, manually unplugging and re-plugging is no option whatsoever. Is there a way to "refresh" the devices or to "unplug and re-plug" the drive by script such that /dev/sdx1 appears? Thanks for any help, Chris

  Read the article

• How to mirror filesystems with millions of hardlinks?

  - by Thomas Berger

  We have one big problem at the moment: We need to mirror a filesystem for one of our customers. Thats usual not really a problem, but here it is: On this filesystem there is one folder with millions of hardlinks (yes! MILLIONS!). rsync requires more then 4 days to just build the filelist. We use the following rsync options: rsync -Havz --progress serverA:/data/cms /data/ Has anyone a idea how to speed up this rsync, or use alternatives? We could not use dd as the target disk is smaller then the source.

  Read the article

• Separating two networks

  - by Farhan Ali

  I have two routers, R1 and R2. R1 (a stock linksys router running dd-wrt) is connected to internet and is serving internet to a network of 5 devices/PCs running a DHCP server, with a network of 192.168.1.0/24. R1 also serves internet services to R2. R2 (a ubuntu server 12.04) gets internet from R1. R2 has 3 PCs attached to it, runs a DHCP server with a network of 172.22.22.0/24. My requirement is that the clients on both sides should not talk to each other at all – with the exception that R1 clients may access the R2 router through its IP of 192.168.1.x. At the moment, R2 clients are able to ping R1 clients, which is unacceptable, whereas R1 clients cannot ping R2 clients, which is OK. I believe iptables could be set up but I don't know how.

  Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >