Search Results

Search found 12079 results on 484 pages for 'secondary ip'.

Page 78/484 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

  • Can't get IPv6 address using radvd on wireless interface on windows, wired works fine.

    - by AndrejaKo
    I set up my router to use OpenWRT and set it up to use IPv6 using a tunnel form SixXs. I'm having problems with stateless autoconfiguration using radvd. On my computer, wired connection can get its IPv6 address fine, but wireless can't. After spending some time on OpenWRT forums, I'm pretty much sure now that router is set up fine and that the problem is with my windows settings. Also, I do not have any problems getting IPv6 address on openSUSE 11.3. So what should I do to solve this and what information should I post? Here's radvdump output for wired interface: interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition Here's radvdump output for wireless interface: # # radvd configuration generated by radvdump 1.6 # based on Router Advertisement from fe80::a0b7:deff:fef0:5b34 # received by interface br-lan # interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition # # radvd configuration generated by radvdump 1.6 # based on Router Advertisement from fe80::a0b7:deff:fef0:5b34 # received by interface br-lan # interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition

    Read the article

  • switch duplicates packets and forward in two route

    - by sami
    there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

    Read the article

  • F5 BIG_IP persistence iRules applied but not affecting selected member

    - by zoli
    I have a virtual server. I have 2 iRules (see below) assigned to it as resources. From the server log it looks like that the rules are running and they select the correct member from the pool after persisting the session (as far as I can tell based on my log messages), but the requests are ultimately directed to somewhere else. Here's how both rules look like: when HTTP_RESPONSE { set sessionId [HTTP::header X-SessionId] if {$sessionId ne ""} { persist add uie $sessionId 3600 log local0.debug "Session persisted: <$sessionId> to <[persist lookup uie $sessionId]>" } } when HTTP_REQUEST { set sessionId [findstr [HTTP::path] "/session/" 9 /] if {$sessionId ne ""} { persist uie $sessionId set persistValue [persist lookup uie $sessionId] log local0.debug "Found persistence key <$sessionId> : <$persistValue>" } } According to the log messages from the rules, the proper balancer members are selected. Note: the two rules can not conflict, they are looking for different things in the path. Those two things never appear in the same path. Notes about the server: * The default load balancing method is RR. * There is no persistence profile assigned to the virtual server. I'm wondering if this should be adequate to enable the persistence, or alternatively, do I have to combine the 2 rules and create a persistence profile with them for the virtual server? Or is there something else that I have missed?

    Read the article

  • How to Access an AWS Instance with RDC when behind a Private Subnet of a VPC

    - by dalej
    We are implementing a typical Amazon VPC with Public and Private Address - with all servers running the Windows platform. The MS SQL instances will be on the private subnet with all IIS/web servers on the public subnet. We have followed the detailed instructions at Scenario 2: VPC with Public and Private Subnets and everything works properly - until the point where you want to set up a Remote Desktop Connection into the SQL server(s) on the private subnet. At this point, the instructions assume you are accessing a server on the public subnet and it is not clear what is required to RDC to a server on a private subnet. It would make sense that some sort of port redirection is necessary - perhaps accessing the EIP of the Nat instance to hit a particular SQL server? Or perhaps use an Elastic Load Balancer (even though this is really for http protocols)? But it is not obvious what additional setup is required for such a Remote Desktop Connection?

    Read the article

  • Host forwarding fails, server is up, domain name tests ambiguous

    - by jayunit100
    I have a domain name registered with http://www.registryrocket.com/ The "main" site, which is called rudolfcode.net, is registered under godaddy, and forwards to a heroku site (rudolfcode.herokuapp.com). I have found that the main site, rudolfcode.net works, but the hostgator forwarding has stopped working (firefox simply fails when you point to http://www.rudolflabs.com, which is the domain name registered by hostgator). How can I debug this issue ? Finally, I have tried to run some DNS tests, and here are the results : Im not sure what the failures mean .... But Im pretty sure that "Conecting to WWW Home Page" failed is a pretty bad sign ! Thanks.

    Read the article

  • What happens when ARP Request comes from a different subnet?

    - by gsinha
    What will happen when an ARP Request packet is sent from router1 to router2 in the following two cases? Will an ARP Reply be generated or the ARP Request packet be dropped? [router1]Intf1(20.0.0.1/24) ======== (40.0.0.1/24)Intf2[router2] [router1]Intf1(20.0.0.1/24) ======== (20.0.0.2/8) Intf2[router2] The topology above have a port "Intf1" on router "router1" connected a port "Intf2" on another router "router2" via a direct link(eg, a 1 Gbps cable).

    Read the article

  • PCs with Wired Connection Keep Losing Internet Connectivity

    - by user717452
    I have a U-verse ATT DSL Internet at our church building. Recently, any computer that is plugged into the network via Ethernet keeps losing its internet connectivity. The setup is from the Modem to a Netgear Wireless Router, and from the router to 3 different computers. None of the laptops that use Wifi ever lose internet, just the wired ones, and I end up having to do ipconfig /release and /renew every day to get it back. One computer has Windows 7 and one has Windows XP. Any ideas as to what is going on with our network?

    Read the article

  • pfSense routing between two routers with shared network

    - by JohnCC
    I have a network set-up using two pfSense routers arranged like this:- DMZ1 WAN1 WAN2 DMZ2 | | | | | | | | \___ PF1 PF2___/ | | | | \___TRUSTED___/ Each pfSense router has its own separate WAN connection, and a separate DMZ network attached to it. They share a common TRUSTED LAN between them. The machines on the trusted network have PF1 as their default gateway. PF1 has a static route defined to DMZ2 via PF2, and PF2 has a static route to DMZ1 via PF1. There is NAT to the WAN but internal networks (DMZ1/2 and TRUSTED) use different RFC1918 subnets. I inherited this arrangement, and all used to work fine. I made a config change to PF1 (relating to multicast), and machines on DMZ2 suddenly could not talk to TRUSTED. I rolled the change back, but the problem persisted. What I guess you'd hope would happen is that TCP packets would go DMZ2 - PF2 - TRUSTED and on return TRUSTED - PF1 - PF2 - DMZ2. That's the only way I can see it would have worked. However, PF1 drops the returning packets. I've verified this using tcpdump. I've worked around this by adding static routes to DMZ2 via PF2 to the servers on TRUSTED, but some devices on there do not support static routes so this is not ideal. Is there way to make this arrangement work decently, or is the design inherently flawed? Thanks!

    Read the article

  • Switches with large MAC address table?

    - by user1290200
    Does anyone know which switches have a large MAC address table ? I see most switches having only 8K, but we need to store way, way more than that (hundreds of K). I know this may seem odd, but trust me, there's no other way we can make our setup work. The only thing we seem to be able to do is install Juniper routers that store up to 1M addresses, but that will get quite costly and we'd rather avoid doing that.

    Read the article

  • Why would you use IPv6 internally?

    - by KCotreau
    Of course, I realize the need to go to IPv6 out on the open Internet since we are running out of addresses, but I really don't understand why there is any need to use it on an internal network. I have done zero with IPv6, so I also wonder: Won't modern firewalls do NAT between internal IPv4 addresses, and external IPv6 addresses? I was just wondering since I have seen so many people struggling with IPv6 questions here, and wonder why bother?

    Read the article

  • Possible to redirect from HTTPS to HTTP behind load-balancer?

    - by Derek Hunziker
    I have a basic ASP.NET application that sits behind an F5 load-balancer. Incoming SSL requests (over HTTPS) terminate at the load-balancer and all internal communication between the load-balancer and my application servers is unsecure (over HTTP). When a unsecure request comes in, my app is able to use Response.Redirect("https://...") to redirect a secure URL with no problems. However, the other direction appears to be impossible - I cannot redirect from HTTPS to HTTP using Response.Redirect() from my application. The URL remains HTTPS for the client and does not change. Could the F5 be preventing the redirect for ever reaching the client? Is there any special configuration necessary to let this happen?

    Read the article

  • How does Heartbeat determine when to switch to the secondary? Can you force it to switch?

    - by John
    I've been trying to understand exactly how Heartbeat works - I understand how when one server dies, it switches to the backup. But, for me, it also switches when the primary has a large increase in workload. But, it doesn't always switch at the same value. There doesn't seem to much information on the web about how it works. The best I've found is this article. How does Heartbeat determine when to switch to the secondary, and how does it determine when it switch back to the primary? Is this an editable setting, and can I force it to switch between one and the other? Sometimes when Heartbeat will switch to the secondary, it takes a few days or I've even seen two weeks before it switches back to the primary. This is well after the primary traffic has gone down. I'm currently using BlueOnyx, and my Heartbeat settings are: Auto Failback: on Keepalive: 1 seconds Warntime: 10 seconds Deadtime: 20 seconds Initdead: 30 seconds

    Read the article

  • forward same port but for two different IPs (cisco)

    - by Colin
    Hi! I have a cisco running IOS 12.0(25) responding to two different IPs addresses: IP_A and IP_B. Behind this router I also have two different servers: server_A and server_B. What I want is to forward port 22 to both servers, so: IP_A, port22 -> server_A, port22 IP_B, port22 -> server_B, port22 ATM this only works for one of them (server_A), this is my config: interface Ethernet0/0 description Internet ip address IP_A 255.255.255.0 ip address IP_B 255.255.255.0 secondary no ip directed-broadcast ip nat outside no ip mroute-cache no cdp enable ip nat pool pool_A IP_A IP_A netmask 255.255.255.0 ip nat pool pool_B IP_B IP_B netmask 255.255.255.0 ip nat inside source list A pool pool_A overload ip nat inside source list B pool pool_B overload ip nat inside source static tcp server_B 22 IP_B 22 extendable ip nat inside source static tcp server_A 22 IP_A 22 extendable access-list A permit server_A access-list B permit server_B

    Read the article

  • 2 Nics - Same Subnet..Route backup traffic through one of them

    - by Matthewhall58
    I have a windows server and a centos linux server. I want the nightly backup file (targz) that copies to the windows machine to use a different nic so that the main nic is not burdenend with moving the large file. Each server has 2 Nics in it. the network is 10.173.10.0 mask 255.255.255.192 Centos Linux Box: Eth0 is configured with 10.173.10.80 mask 255.255.255.192 gw 10.173.10.65 Eth 1 is configured with 10.173.10.71 mask 255.255.255.192 gw 10.173.10.65 Windows Box Eth 0 is 10.173.10.72 mask 255.255.255.192 gw 10.173.10.65 Eth 1 is 10.173.10.70 mask 255.255.255.192 gw 10.173.10.65 I can ping each machine from each machine. On the linux machine I use the command route add -host 10.173.10.70 dev eth1 but then when i ping 10.173.10.70 it is unreachable..... WHY?

    Read the article

  • How can I do a "Coming Soon" redirect on IIS6 for everyone except a couple specific IPs?

    - by colinodell
    We're about to do some major maintanence on an IIS 6 / ASP (Classic) website. We want all visitors to be redirected to a "Coming Soon" page (or something similar). This should NOT apply to our dev team (operating remotely), so we'd want to specify certain IPs that should have access to the under-construction site. How can this be accomplished in IIS 6? (Using classic ASP if needed)

    Read the article

  • how to fight back attacks on my web service

    - by user12145
    My apache webservice is getting a large quantity of requests over the days, each one with somewhat random login to gain access. I identified about 60 such ips(a few sample below), all belong to google. is there a way to find more information about the origin of the attacker? or should I just block these ips. secondly, should I attempt to block the identified ips subnets(74.125.46.*) as a preventive measure? 72.14.194.65 64.233.172.20 74.125.75.19 72.14.194.33 74.125.46.87 74.125.44.91 74.125.46.91

    Read the article

  • Why would one server be sending DUP ACK packets to one PC, which is responding with HTTP RST packets?

    - by IronicMuffin
    I'm not a network profressional, so please excuse any wrong language. I was debugging why my DNS traffic was a constant 160Kbps on our corporate network. I opened up a wireshark trace, and I see one PC of a coworker broadcasting HTTP [RST] packets to one of our DMZ servers at the rate of 1000 a second. He restarted his machine, and as soon as it went offline, the server started broadcasting [DUP] [ACK] packets, until he came back online. It then resumed the HTTP [RST] packets. Apparently this server has been doing this kind of behavior since it went live. I believe it did this with a printer and an access point as well. Can anyone explain why this behavior is occurring? Any solutions? The initial research was done because there have been "bandwidth issues" and I wonder if this is contributing.

    Read the article

  • How to route traffic via another machine before the default gateway

    - by Rich
    At the moment I have a router on 192.168.0.1, a Linux box on 192.168.0.2 and desktop clients from 192.168.0.3. Everything works with 192.168.0.1 as the default gateway. I'd like to send the traffic from the desktop clients via the Linux box before it goes out through the router so I can sniff the traffic (some of these are wireless connections). Can I set the default gateway to 192.168.0.2 on the desktop clients and then perhaps add some iptables rules to forward this traffic through 192.168.0.1? Quite happy to change the client desktops to another subnet if that makes it easier. Thanks in advance.

    Read the article

  • 1 Computer Pulls Wrong DNS Every Morning

    - by bradenkeith
    One of my users takes his laptop home, connects to his internal network fine. He brings it in every morning and since Monday - every morning it pulls the wrong DNS every time. It pulls 1 DNS: 192.168.1.1 which is the router. The DNS are external IPs. I have several users that take their laptops home and connect to other networks - what could cause this anomaly? He's booting up when he comes in the office and a simple ipconfig /release /renew fixes the issue.

    Read the article

  • Recommend a desktop app to monitor port 80 on servers

    - by busyone
    Hello, I did some googling but was unsuccessful, so I am posting here. I am looking to get an app (preferably free/open source) to monitor my servers on port 80 that would send me an email/text when some predefined timeout triggers. I could probably write something in VB to do this but i am burried with projects, why reinvent the wheel. I know there are services out there that want you to pay $5/month to do so, I was thinking about a Windows app that would sit on my computer and simply monitor predefined list of IPs on port 80. Thanks!

    Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >