Search Results

Search found 2347 results on 94 pages for 'slightly frustrated'.

Page 78/94 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• BIOS upgrade lowers CPU temperature

  - by N.N.

  Setup I've got a system with an Asus P8Z68-V PRO motherboard and an Intel Core i7-2600K CPU running at stock speed (no overlocking) which I cool with a Noctua NH-U12P. On the heatsink I've got the two included fans connected via the included Low-Noise Adapters (L.N.A.) 1100 RPM, 16.9 dB(A). In the BIOS settings I've set the CPU and chassis fan profile to silent. Issue Yesterday I upgraded from BIOS version 0501 to 0606. After the upgrade I checked the temperatures in the BIOS monitor and was surprised to see that the CPU temperature was slightly ~30°C. Before the upgrade the CPU temperature was ~50°C with the same BIOS settings (see the following heading for details on temperatures). How can this be? It seems a bit odd that a BIOS upgrade can lower the CPU temperature by 20°C and it also seems odd that the CPU temperature is lower than the chassis temperature. Temperatures When I've checked temperatures the room temperature has been ~23°C. I haven't changed the placement of the computer nor the hardware or cooling setup between BIOS versions. BIOS version 0501 BIOS monitor: CPU: ~50°C Chassis: ~33°C I haven't got any temperature measures from lm-sensors or the like for version 0501 because I only discovered the issue after upgrading to version 0606 and the BIOS updater utility won't let me downgrade to version 0501 (it says "outdated image" when I try to load version 0501). BIOS version 0606 BIOS monitor: CPU: ~30°C Chassis: ~33°C lm-sensors in Ubuntu 11.04 Desktop 64-bit (sudo sensors after an uptime of 4 h 52 min and a load average of 0.22, 0.18, 0.15): coretemp-isa-0000 Adapter: ISA adapter Core 0: +32.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +35.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +29.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +36.0°C (high = +80.0°C, crit = +98.0°C) The BIOS monitor temperatures was checked directly after the lm-sensors temperatures was checked. BIOS version 0706, 0801, 1101 and 3203 I get the same kind of temperatures both in the BIOS monitor and with lm-sensors in BIOS version 0706, 0801, 1101 and 3203 as in 0606. Information from Asus The 0606 changelog mentions nothing explicitly about CPU temperature (but item 3., as indicated by sidran32, might affect temperatures): P8Z68-V PRO 0606 BIOS with IRST 10.6.0.1002 Enable the support of Intel Rapid Storage Technology version 10.6.0.1002 Release Improve DRAM compatibility Improve System stability Improve compatibility with some Raid card model Increase IGD share memory size to 512MB However the following FAQ might give a hint: FAQs I find that the CPU temperature reading in BIOS is about 10~20 degrees centigrade hotter than the reading in OS. Is it normal? Page Tools Solution That is normal as BIOS does not send idle command to the CPU, making most of the power saving features useless. You should be getting similar reading if you disable EIST/C1E/CPU C3 Report/CPU C6 Report in BIOS.

  Read the article

• Will this RAID5 setup work (3TB Seagate Barracudas + Adaptec RAID 6405)?

  - by Slayer537

  As the title states, will this RAID combo work, and if not what needs to be changed? Overall opinions would be most helpful. I currently run a small file server of about 5TB or so. I keep outgrowing my needs and need to build a RAID setup that will allow me to expand as needed. I am new to RAID setups, especially one of the scale I have currently planned out, but I have being doing some research for the past couple of weeks and have come up with a build. Ideally, I'd have the setup completely built, but I'd like to keep the total cost around $1k and can't afford to go above $1.5k, so unfortunately that's not an option. 2 of my current drives are WD Caviar Blacks 2TB; however, I have recently learned that due to the lack of TLER those drives are awful for any RAID setup other than 0 or 1. That being said, my third drive is a Seagate Barracuda 3TB (ST300DM001) and I have found a RAID controller that states it supports it, so I'd like to use this same type of drive, if possible. Have any of you had any experience using this drive or a similar one in a RAID5 configuration? The manufacturer states that it supports it, but knowing that it is not an enterprise drive, I am slightly concerned that it could drop out of the array. I would just go with enterprise drives, but those are about double in cost... Parts list: Storage rack: http://www.ebay.com/itm/SGI-3U-Media-Storage-Server-16-Hard-Drive-Bay-SATA-SAS-Expander-Omnistor-SE3016-/140735776937?pt=LH_DefaultDomain_0&hash=item20c48188a9 3 more HDs (for now..): http://www.amazon.com/Seagate-Barracuda-3-5-Inch-Internal-ST3000DM001/dp/B005T3GRLY/ref=dp_return_2?ie=UTF8&n=172282&s=electronics Adaptec RAID 6405: http://www.newegg.com/Product/Product.aspx?Item=N82E16816103224 here's a link to the compatibility sheet if that helps: http://download.adaptec.com/pdfs/compatibility_report/arc-sas_cr_03-27-12_series6.pdf SAS expander cable: http://www.pc-pitstop.com/sas_cables_adapters/8887-2M.asp My plan is to install the RAID card in my computer and then route the SAS cable to the rack. Setup a RAID5 on 3 drives, transfer my data over from my other drive, and then add that drive to the array. Eventually, I'd like to get a 2U unit and run the file server on that and move the RAID card over to there, but that will have to happen later on. Side note: The computer the card would be going into will be running Windows 7 Pro with 24GB of DDR3-1600 and an i7-930.

  Read the article

• Real server, Multiple IP Addresses, HyperV Virtual Server, How to partition IPs across real and Virtual NICs

  - by Steven_W

  This is a slightly difficult problem to explain without same basic background information - I'll try and refine the question later as necessary Originally, I have a single hosted server (Win 2008R2) with the following range of 8 IP addresses. - Single NIC - IP: x.x.128.72 -> x.x.128.79 - Subnet: x.x.255.192 - GW: x.x.128.65 After installing Hyper-V and setting up a single virtual server on the same box, I then wanted to assign one of the IP addresses to the virtual server, leaving everything else running normally. -- Firstly, I tried using the "External" network, but (even after setting IPs on the "Virtual Adapter" similar to Here but struggled to get networking running at all. I needed to keep the server running (otherwise I would have spent more time pursuing this approach) Q1 ... Was this a sensible thing to do ? Should I have carried on down this route ? -- I then decided to try different approach - Set the HyperV network to "Internal" (visible to Management OS) - Physical NIC - IP: x.x.128.72 -> x.x.128.75 - Subnet: x.x.255.192 - GW: x.x.128.65 - Virtual NIC - IP: x.x.128.78 - Subnet: x.x.255.252 - GW: x.x.128.72 ... { The same as the IP of the physical NIC ) - Virtual OS-NIC - IP: x.x.128.77 - Subnet: x.x.255.252 - GW: x.x.128.78 ... { The same as the IP of the host virtual-NIC ) -- Surprisingly enough, this approach actually worked, and I was able to connect from all the following: - Internet to/from physical NIC (x.x.128.72) - physical NIC (x.x.128.72) to virtual-OS-NIC (x.x.128.77) e.g. testing via ping + FTP - Internet to/from virtual-OS-NIC (x.x.128.72) -- The problem I have is that this approach seems to only last for a short while (a few hours). After this time, it seems that I lose the ability to connect from Virtual-OS-NIC to/from the internet (but I can still connect from the host-OS to the virtual-OS and from the host-OS to the internet) I have re-tested this a couple of times with the same results ... I leave the server on for a few hours (e.g. overnight), and when I come back in the morning, the Virtual-OS loses the ability to route to the internet -- I'm not quite sure what to look at next (or whether I'm going about this completely the wrong way ) One "possible relevant item" is that the host-OS is also running RRAS (Routing and Remote Access), but this is only to run a simple VPN -- Q2 - Wheat should I be looking at next ? (Any good references / recommendations of what to try) Would appreciate any thoughts or comments (even if you tell me I'm going about this the wrong way)

  Read the article

• How can you know what is w3wp.exe doing? (or how to diagnose a performance problem)

  - by Daniel Magliola

  I'm having a performance problem in a site we've made, and I'm not exactly sure how to start diagnosing it. The short description is: We have a very small site (http://hearablog.com) with very little traffic, in a crappy dedicated server, CPU is always very high, sometimes it stays at 100% for minutes, and w3wp.exe is taking most of it. A typical scenario is w3wp.exe takes 60%, and SQL Server takes about 30%. Our DB is pretty small too. Long description and more details: The site is hosted in a very crappy server by Cari.Net. From the beginning we had the feeling that the server didn't quite behave correctly, like some things would take just too long, so this could be a configuration problem from the get go. It may also be that we are getting a virtual server while we're supposed to have a dedicated one, although we have no evidence that'd indicate this, except for the fact that the server tends to be quite slow. The server is Windows 2008 Standard 64-bit, with SQL 2008 Express Hardware is a Celeron 2.80 GHz, 1Gb RAM The website is developed in ASP.Net MVC, using Entity Framework for data access. Now, this is pretty crappy hardware, but i've had other servers with these guys, with equivalent (or worse) HW, and performance is much better than this one. That said, the other servers have W2003 and SQL2005, and I'm using ASP.Net "WebForms" 2.0, no MVC, no LINQ, no EF; so I'm not sure whether going to 2008 / the other stuff means a big performance penalty is expected. I'm serving MP3 files (5-20 Mb) regularly, which is a slightly unusual load, maybe that is causing some kind of problems? Would that cause w3wp to use a lot of CPU? Disk usage seems very low. Memory is usually around 90%, but disk usage seems to indicate it's not paging much. I get tons of e-mails every day about SQL timeouts, for queries taking over 30 seconds, although all our queries are pretty straightforward (or should be, but EF may be screwing it up). This is what resource monitor looks like in one of these "sprints" of 100% CPU, in case there's anything useful there. And a snapshot of some performance counters: Now, what confuses me very much is that CPU usage of w3wp is just so high. It shouldn't be doing much really... So my questions are... Is there any way of finding out "what" it is doing? Maybe even profile it? Any performance counters I should be looking at? Is this to be expected given this hardware/software configuration? Is this could be cause by some kind of configuration failure, where would you start looking? Thank you VERY much. Daniel Magliola

  Read the article

• How to improve this bash shell script for turning hardlinks into symlinks?

  - by MountainX

  This shell script is mostly the work of other people. It has gone through several iterations, and I have tweaked it slightly while also trying to fully understand how it works. I think I understand it now, but I don't have confidence to significantly alter it on my own and risk losing data when I run the altered version. So I would appreciate some expert guidance on how to improve this script. The changes I am seeking are: make it even more robust to any strange file names, if possible. It currently handles spaces in file names, but not newlines. I can live with that (because I try to find any file names with newlines and get rid of them). make it more intelligent about which file gets retained as the actual inode content and which file(s) become sym links. I would like to be able to choose to retain the file that is either a) the shortest path, b) the longest path or c) has the filename with the most alpha characters (which will probably be the most descriptive name). allow it to read the directories to process either from parameters passed in or from a file. optionally, write a long of all changes and/or all files not processed. Of all of these, #2 is the most important for me right now. I need to process some files with it and I need to improve the way it chooses which files to turn into symlinks. (I tried using things like the find option -depth without success.) Here's the current script: #!/bin/bash # clean up known problematic files first. ## find /home -type f -wholename '*Icon* ## *' -exec rm '{}' \; # Configure script environment # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ set -o nounset dir='/SOME/PATH/HERE/' # For each path which has multiple links # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # (except ones containing newline) last_inode= while IFS= read -r path_info do #echo "DEBUG: path_info: '$path_info'" inode=${path_info%%:*} path=${path_info#*:} if [[ $last_inode != $inode ]]; then last_inode=$inode path_to_keep=$path else printf "ln -s\t'$path_to_keep'\t'$path'\n" rm "$path" ln -s "$path_to_keep" "$path" fi done < <( find "$dir" -type f -links +1 ! -wholename '* *' -printf '%i:%p\n' | sort --field-separator=: ) # Warn about any excluded files # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ buf=$( find "$dir" -type f -links +1 -path '* *' ) if [[ $buf != '' ]]; then echo 'Some files not processed because their paths contained newline(s):'$'\n'"$buf" fi exit 0

  Read the article

• Why is vCenter 5.1u1 exiting hosts from maintenance mode?

  - by Shane Madden

  This vCenter server was just upgraded to 5.1 update 1. I'm going through hosts and bringing firmware up to date, then upgrading them from various versions of 5.0 to 5.1u1. vCenter 5.1u1 seems to have an interesting new behavior: it's removing hosts from maintenance mode when they reconnect after being disconnected -- but very inconsistently, I've seen it maybe 4 or 5 times on ~25-30 host reboots. I've only seen it happen on 5.0 hosts that have not yet been upgraded to 5.1. In the image, I placed the host in maint mode and rebooted it into the HP SPP DVD's automatic update mode. After its usual ~40 minute update process, the host came back online.. and 7 seconds before even logging that the host had reconnected, vCenter had sent the host a task to exit maintenance mode. In my understanding, the only time vCenter should drop a host out of maintenance mode is when vCenter put it into maintenance mode itself (such as a VUM upgrade task). Why would this vCenter be unilaterally exiting a host from user-initiated maintenance mode? Edit, additional info: I ran the firmware upgrades on 5 more hosts, all at the same time. Two of them exited maint mode after reconnecting, three did not. The common factor of those exiting maint mode seems to be how long they were offline; the two that took a few tries to boot to the virtual media are the two that got knocked out of maint mode. esx31 (image above): 45 minutes unresponsive esx19 (exited maint): 87 minutes unresponsive esx24 (stayed in maint): 32 minutes unresponsive esx29 (stayed in maint): 39 minutes unresponsive esx32 (stayed in maint): 30 minutes unresponsive esx34 (exited maint): 70 minutes unresponsive Edit: The disconnect time idea seems to have been a red herring, as it's not happening consistently. Additionally, in the vpxd.log the exit maint mode task initiation seems to always immediately follow this vim.EnvironmentBrowser.queryProvisioningPolicy SOAP call. Here's the lines, slightly trimmed for clarity: 15:27:49.535 [info 'vpxdvpxdVmomi'] [ClientAdapterBase::InvokeOnSoap] Invoke done (esx31, vim.EnvironmentBrowser.queryProvisioningPolicy) 15:27:49.560 [info 'commonvpxLro'] [VpxLRO] -- BEGIN task -- esx31 -- HostSystem.exitMaintenanceMode -- Note that on the nodes that don't get the exit task, the vim.EnvironmentBrowser.queryProvisioningPolicy event still occurs. I'm not seeing any other differences in events before or after this in the reconnect process, aside from the extra events caused by exiting maintenance mode. Given the log's mention of provisioning policies, looking for autodeploy-related maintenance mode issues turns up complaints about similar behavior (though I'm not using autodeploy at all).

  Read the article

• XP OEM licensing when reinstalling Windows XP

  - by mindas

  My wife has managed to buy a Dell laptop she was using at her ex-employer that just went bust. The problem with it is the OS (Windows XP) which takes ages to boot and is generally disproportionally slow to the hardware of the machine. So my aim is to sacrifice a day and reinstall it. The problem I am slightly worried about is the licensing/registration/activation hell. Apart from the sticker (with WinXP license key), the laptop has no other paperwork proving this license is legitimate. I believe this was originally an OEM license. Unfortunately, I don't have the the installation CD. This computer also has MS Office installed (which I would like to retain) but it none of MS Office apps would launch due to some obscure error complaining about lack of free disk space (which computer has plenty of). I have absolutely no clue what kind of license this MS Office was. And because the company has gone into the administration, there is no way of getting this information nor installable media. I believe that by buying the hardware I have also acquired the software which I can use as I see fit. Correct me if I'm wrong. Above said, my question would be: What is the easiest way of reinstalling the XP? By easiest I mean avoiding spending my time to prove Microsoft support I've got the right to use the software (insert your computer says noooo joke here) but still being able to get to fresh virgin activated legal state of the XP. I used to work as a sysadmin many years ago so I am not afraid of any technical difficulties. The same question applies to MS Office. I imagine the process would consist of backing up all the data, pulling some bits from the registry and using that on the fresh install. As for reinstall I'd expect to use some sort of OEM Windows repair CD from Dell, right? Are those freely available? My other box (HP) has such a thing and it can't be used on any other brand. I'm sure somebody had to go through this licensing hell and could share his/her tips. Thanks in advance.

  Read the article

• XP OEM licensing when reinstalling Windows XP

  - by mindas

  My wife has managed to buy a Dell laptop she was using at her ex-employer that just went bust. The problem with it is the OS (Windows XP) which takes ages to boot and is generally disproportionally slow to the hardware of the machine. So my aim is to sacrifice a day and reinstall it. The problem I am slightly worried about is the licensing/registration/activation hell. Apart from the sticker (with WinXP license key), the laptop has no other paperwork proving this license is legitimate. I believe this was originally an OEM license. Unfortunately, I don't have the the installation CD. This computer also has MS Office installed (which I would like to retain) but it none of MS Office apps would launch due to some obscure error complaining about lack of free disk space (which computer has plenty of). I have absolutely no clue what kind of license this MS Office was. And because the company has gone into the administration, there is no way of getting this information nor installable media. I believe that by buying the hardware I have also acquired the software which I can use as I see fit. Correct me if I'm wrong. Above said, my question would be: What is the easiest way of reinstalling the XP? By easiest I mean avoiding spending my time to prove Microsoft support I've got the right to use the software (insert your computer says noooo joke here) but still being able to get to fresh virgin activated legal state of the XP. I used to work as a sysadmin many years ago so I am not afraid of any technical difficulties. The same question applies to MS Office. I imagine the process would consist of backing up all the data, pulling some bits from the registry and using that on the fresh install. As for reinstall I'd expect to use some sort of OEM Windows repair CD from Dell, right? Are those freely available? My other box (HP) has such a thing and it can't be used on any other brand. I'm sure somebody had to go through this licensing hell and could share his/her tips. Thanks in advance.

  Read the article

• Hyper-V Machine drifts time all over, even with NTP

  - by MichaelGG

  Resolved The problem was Hyper-V on that machine. I removed Hyper-V, installed VMware Server, ran the same VM. Time sync issues went away (< 100ms difference after a day). My setup is like this: HYV1 - HyperV machine (non domain) - sync irrelevant AD1 - VM AD server on HYV1, sync'd to time.nist.gov. HyperV time sync off. S1 - Physical machine, sync'd to domain. S2 - Physical machine running HyperV, sync'd to domain. V1 - Linux VM machine on S2, sync'd to AD1. No HyperV integration. AD1 and S1 have fine sync -- stripchart shows less than 100ms difference. S2 drifts like crazy. Here's a bit of the stripchart against AD1: 18:33:22 d:+00.0010138s o:+05.4101899s 18:33:24 d:+00.0010138s o:+05.4319765s 18:33:26 d:+00.0000000s o:+05.4788429s 18:33:28 d:+00.0000000s o:+05.6089942s 18:33:30 d:+00.0010138s o:+05.7240269s 18:33:32 d:+00.0000000s o:+06.0421911s 18:33:34 d:+00.0081104s o:+06.5613708s 18:33:37 d:+00.0000000s o:+06.9096594s 18:33:39 d:+00.0000000s o:+06.8867838s 18:33:41 d:+00.0010127s o:+06.8936401s In 20 seconds, it drifted over a second. If I manually reset it to within 1s, within a few minutes it'll be back drifting about 2 seconds. Overnight it went from ~2s to ~5s. The Linux VM inside S2 has perfect sync with AD1. Here's the config: C:\Users\mgg>w32tm /dumpreg /subkey:Parameters Value Name Value Type Value Data ------------------------------------------------------------ ServiceDll REG_EXPAND_SZ %systemroot%\system32\w32time.dll ServiceMain REG_SZ SvchostEntry_W32Time ServiceDllUnloadOnStop REG_DWORD 1 Type REG_SZ NT5DS NtpServer REG_SZ ad01.mydomain ad02.mydomain C:\Users\mgg>w32tm /dumpreg /subkey:Config Value Name Value Type Value Data ----------------------------------------------------------- FrequencyCorrectRate REG_DWORD 4 PollAdjustFactor REG_DWORD 5 LargePhaseOffset REG_DWORD 50000000 SpikeWatchPeriod REG_DWORD 900 LocalClockDispersion REG_DWORD 9 HoldPeriod REG_DWORD 5 PhaseCorrectRate REG_DWORD 1 UpdateInterval REG_DWORD 30000 EventLogFlags REG_DWORD 2 AnnounceFlags REG_DWORD 5 TimeJumpAuditOffset REG_DWORD 28800 MinPollInterval REG_DWORD 2 MaxPollInterval REG_DWORD 8 MaxNegPhaseCorrection REG_DWORD -1 MaxPosPhaseCorrection REG_DWORD -1 MaxAllowedPhaseOffset REG_DWORD 300 I looked at the event log, and apart from warnings about sync (after it gets way out of sync), there's no other warnings. How can I go about troubleshooting this? It's the only machine that is having this problem. All the other machines (physical and virtual) are doing fine. Edit: To clarify: The VM (AD1) has integration turned off and syncs to time.nist.gov. AD1 is fine. It's the physical machine S1 that can't sync to AD1 and drifts all over. All the other physical servers are able to sync to AD1 just fine. Update So, it appears to be an issue of running the VM. The clock slips slowly with the VM off. Turned on, it immediately starts losing seconds. I swt the VM to only use half the resources, and that seems to have slightly mitigated it, for now. Thanks!

  Read the article

• Cannot exit X server, restart, shutdown or drop to tty when VGA monitor active

  - by terdon

  I have a strange problem. If I connect an external VGA monitor to my laptop, exiting the X environment in any way crashes the computer. For example, say I am working with my two monitors (the laptop's and one connected to my VGA port) active. Hitting Ctrl+Alt+F Key should take me down to a tty. What actually happens is that the VGA screen goes blank, as you would expect, but the laptop screen, although still on, shows nothing. I know the screen is on because it is slightly more illuminated than when it is off. When in this state, I can do nothing to regain access to the machine. I have tried: Ctrl+F Key (and even Ctrl+Alt+F Key, just in case) combinations and none seem to have any effect. Ctrl+Alt+Del : Nothing Magic SysRq key: Nothing Blindly typing my username and password and trying to reboot/shutdown or restart GDM or MDM: Nothing The only thing that works is a hard reset. The exact same behavior occurs when kiling the X server through Ctrl+Alt+Backspace, rebooting or shutdown. There is no difference if I reboot/shutdown/log out using the WM's graphical menu or if I use the shutdown or rebootcommands. It is also not WM-dependent. I have the same problem using Cinnamon, Gnome 3, MATE and xfce4. It is, however, VGA dependent. I have tried connecting another VGA monitor and have the same problem. I do not, however, have this problem if a screen is connected to the DisplayPort. It is, therefore, a VGA specific issue. To make things even stranger, this only occurs when both screens are active. If either the laptop screen or the VGA monitor is inactive the problem goes away. Finally, this problem arose when I installed the latest Linux Mint Debian (LMDE). It did not occur with the previous release of LMDE. I am not sure what has changed since I used the same kernel version in both releases (I had upgraded the kernel while on the previous release) and, I think, the same nvidia drivers. Oh, and yes, I have updated the nvidia driver. Hardware: Dell M4500 laptop CPU: Intel Core i7 RAM: 8GB Graphics: nVidia GT216 [Quadro FX 880M] Software: LMDE, kernel 3.2.0-2-amd64 Xorg: 1.11.4 nVidia kernel: 295.20-1+3.2.9-1 Possibly relevant files: /var/log/Xorg.0.log ~/.xsession-errors Does anyone have any ideas how to fix this? Thanks in advance for any help.

  Read the article

• Trouble setting up PATH for Java on Debian

  - by milkmansrevenge

  I am trying to get Oracle Java 7 update 3 working correctly on Debian 6. I have downloaded and set up the files in /usr/java/jre1.7.0_03. I have also set the following two lines at the end of /etc/bash.bashrc: export JAVA_HOME=/usr/java/jre1.7.0_03 export PATH=$PATH:$JAVA_HOME/bin Logging in as other users and root is fine, Java can be found: chris@mc:~$ java -version java version "1.7.0_03" Java(TM) SE Runtime Environment (build 1.7.0_03-b04) Java HotSpot(TM) 64-Bit Server VM (build 22.1-b02, mixed mode) However there are two cases where Java cannot be found as detailed below. Note that both of these worked fine when I have previously installed OpenJDK Java 6 via aptitude, but I need Oracle Java 7 for various reasons. Most importantly, I cannot run commands as another user via su, despite the PATH showing that Java should be present. The user was created with adduser chris root@mc:~# su chris -c "echo $PATH" /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/java/jre1.7.0_03/bin:/bin root@mc:~# su chris -c "java -version" bash: java: command not found root@mc:~# su chris -c "/usr/java/jre1.7.0_03/bin/java -version" java version "1.7.0_03" ... How can it be in the PATH but not be found? Update 05/04/2012: explained by Daniel, to do with it being a non-interactive shell so files such as /etc/profile and /etc/bash.bashrc are not executed. Doing a full swap to that user and running Java works: root@mc:~# su chris chris@mc:/root$ java -version java version "1.7.0_03" ... I run a script on start up which exhibits similar but slightly different problems. The script is located in /etc/init.d/start-mystuff.sh and calls a jar: #!/bin/bash # /etc/init.d/start-mystuff.sh java -jar /opt/Mars.jar I can confirm that the script runs on start up and the exit code is 127, which indicates command not found. Inserting a line to print/save the PATH shows that it is: /sbin:/usr/sbin:/bin:/usr/bin This second problem isn't as important because I can just point directly to the Java executable in the script, but I am still curious! I have tried setting the full PATH and JAVA_HOME explicitly in /etc/environment which didn't help. I have also tried setting them in /etc/profile which doesn't seem to help either. I have tried logging in and out again after setting PATH in the various locations (duh!). Anyway, long post for what will probably have a simple one line solution :( Any help with this would be greatly appreciated, I have spent far too long trying to fix it by myself. Motivation The first problem may seem obscure but in my system I have users that are not allowed SSH access yet I still want to run processes as them. I have a ton of scripts operating in this way and don't want to have to change them all.

  Read the article

• Filtering Security Logs by User and Logon Type

  - by Trido

  I have been asked to find out when a user has logged on to the system in the last week. Now the audit logs in Windows should contain all the info I need. I think if I search for Event ID 4624 (Logon Success) with a specific AD user and Logon Type 2 (Interactive Logon) that it should give me the information I need, but for the life of my I cannot figure out how to actually filter the Event Log to get this information. Is it possible inside of the Event Viewer or do you need to use an external tool to parse it to this level? I found http://nerdsknowbest.blogspot.com.au/2013/03/filter-security-event-logs-by-user-in.html which seemed to be part of what I needed. I modified it slightly to only give me the last 7 days worth. Below is the XML I tried. <QueryList> <Query Id="0" Path="Security"> <Select Path="Security">*[System[(EventID=4624) and TimeCreated[timediff(@SystemTime) &lt;= 604800000]]]</Select> <Select Path="Security">*[EventData[Data[@Name='Logon Type']='2']]</Select> <Select Path="Security">*[EventData[Data[@Name='subjectUsername']='Domain\Username']]</Select> </Query> </QueryList> It only gave me the last 7 days, but the rest of it did not work. Can anyone assist me with this? EDIT Thanks to the suggestions of Lucky Luke I have been making progress. The below is my current query, although as I will explain it isn't returning any results. <QueryList> <Query Id="0" Path="Security"> <Select Path="Security"> *[System[(EventID='4624')] and System[TimeCreated[timediff(@SystemTime) &lt;= 604800000]] and EventData[Data[@Name='TargetUserName']='john.doe'] and EventData[Data[@Name='LogonType']='2'] ] </Select> </Query> </QueryList> As I mentioned, it wasn't returning any results so I have been messing with it a bit. I can get it to produce the results correctly until I add in the LogonType line. After that, it returns no results. Any idea why this might be? EDIT 2 I updated the LogonType line to the following: EventData[Data[@Name='LogonType'] and (Data='2' or Data='7')] This should capture Workstation Logons as well as Workstation Unlocks, but I still get nothing. I then modify it to search for other Logon Types like 3, or 8 which it finds plenty of. This leads me to believe that the query works correctly, but for some reason there are no entries in the Event Logs with Logon Type equalling 2 and this makes no sense to me. Is it possible to turn this off?

  Read the article

• Apache2 graceful restart stops proxying requests to passenger

  - by Rob

  Issue with apache mod proxy, it stops proxying requests after a graceful restart but not all the time. It seems to happen only on a Sunday when a graceful restart is triggered by logrotate. [Sun Sep 9 05:25:06 2012] [notice] SIGUSR1 received. Doing graceful restart [Sun Sep 9 05:25:06 2012] [notice] Apache/2.2.22 (Ubuntu) Phusion_Passenger/3.0.11 configured -- resuming normal operations [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(492) failed in child 26153 for worker proxy:reverse [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(486) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(487) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(489) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(490) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(491) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(480) failed in child 26153 for worker http://api.myservice.org/api [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(481) failed in child 26153 for worker http://api.myservice.org/editor/$1 [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(483) failed in child 26153 for worker http://api.myservice.org/build [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(484) failed in child 26153 for worker http://api.myservice.org/help [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(485) failed in child 26153 for worker http://api.myservice.org/motd.html [Sun Sep 9 05:25:06 2012] [error] proxy: ap_get_scoreboard_lb(479) failed in child 26153 for worker http://api.myservice.org/motd.html After these lines, the logs are flooded with 404's because the requests are not being proxied. It's worth noting that the destination is just another vhost on the same apache instance, but the vhost (http://api.myservice.org) is serving passenger (mod_rails) I was thinking that maybe there's some startup issues with the passenger workers not being ready during a graceful restart? After a full restart resolves it and everything returns to normal. //Edit Here's the vhost config, thanks :) <VirtualHost *:80> UseCanonicalName Off LogFormat "%V %h %l %u %t \"%r\" %s %b" vcommon <Directory /var/www/vhosts> RewriteEngine on AllowOverride All </Directory> RewriteEngine on RewriteCond /var/www/vhosts/%{SERVER_NAME} !-d RewriteCond /var/www/vhosts/%{SERVER_NAME} !-l RewriteRule ^ http://sitenotfound.myservice.org/ [R=302,L] VirtualDocumentRoot /var/www/vhosts/%0/current # Rewrite requests to /assets to map to the /var/file-store/<SERVER_NAME>/ RewriteMap lowercase int:tolower RewriteCond %{REQUEST_URI} ^/assets/ RewriteRule ^/assets/(.*)$ /var/file-store/${lowercase:%{SERVER_NAME}}/$1 # Map /login to /editor.html as it's far friendlier. RewriteCond %{REQUEST_URI} ^/login RewriteRule .* /editor.html [PT] # Forward some requests to the API ProxyPass /api http://api.myservice.org/api ProxyPass /site.json http://api.myservice.org/api/editor/site ProxyPassMatch ^/editor/(.*)$ http://api.myservice.org/editor/$1 ProxyPassMatch ^/api/(.*) http://api.myservice.org/api/$1 ProxyPass /build http://api.myservice.org/build ProxyPass /help http://api.myservice.org/help ProxyPass /motd.html http://api.myservice.org/motd.html <Proxy *> Order allow,deny Allow from all </Proxy> # TODO generate slightly more specific Error Documents for 401/403/500's, # but for now the 404 page is good enough ErrorDocument 401 /404.html ErrorDocument 403 /404.html ErrorDocument 404 /404.html ErrorDocument 500 /404.html </VirtualHost>

  Read the article

• mobile broadband recommendations for Lenovo T500

  - by Justin Grant

  I use a Lenovo T500 primarily in and around San Francisco, although I do some travel in the US on business and occasionally to Europe/Asia. I'm looking for a good mobile broadband option for my T500. I am admittedly baffled by the various mobile-broadband choices (3G vs. 4G, WiMax vs. LTE vs. MIMO vs. ..., etc.). My priorities are (in this order): Compatible with Lenovo T500 and Windows 7. I realize only the AT&T accessory card is listed on Lenovo's site, but I've also heard that other cards will work in my T500 too, like the WiMax/Wifi combo card-- so I'm interested in what actually works, not necessarily only what Lenovo is promoting. Reliable coverage in US large cities, especially the SF Bay Area. my IPhone has lousy coverage in many spots, so I'd be nervous about an AT&T 3G option unless the problem is with the IPhone and not AT&T's network. I'm OK with non-great coverage outside major US cities, since I don't do much travel in those areas. Speed. faster is better. Internal card. I'd slightly prefer something I could install inside my T500 instead of a dongle on the side that might break off, although this is my lowest priority so it's not a big deal. Price. I don't want to pay over $100/month. I've tried lots of Googling and haven't come up with clear answers. I've seen lots of general overviews without recommendations, and lots of passionate opinions which don't feel objective (and don't help me understand compatibility with my hardware & geography). Can you recommend a good, objective guide online, ideally for Lenovo although general guide is OK too, which can help me figure out which option is the best one for me? I'd also be interested in your own personal experiences of using mobile broadband using a Lenovo T500. I'll accept the answer which gets me closest to making a decision.

  Read the article

• Vagrant - Failed login, ssh not set up

  - by motleydev

  This question is two fold because somewhere in my attempts to solve the problem, I created a new one. First: I was trying to vagrant up using a Vagranfile based on the standard hashicorp/precise32 box. Everything worked up until default: SSH auth method: private key where it would eventually time out. Enabling gui in the Vagrantfile showed that the machine never actually logs in. I can use the standard user/pass and log in from that point but the vagrant up process still remains at that prior status. Here's where my understanding might be a little dim. I've tried setting auth method from the insecure_pass_key to my root ~/.ssh/id_rsa or whichever one I wanted to use. I'm not entirely sure where to put a copy of the public key or my authorized keys file. I've got a .vagrant.d folder in my user dir (I'm on OSX) which seems to contain the box images. I've got a .vagrant folder in my directory with the Vagrantfile which seems to contain the specific machine I am building off of. I've tried pouring over the docs and forums but I seem to be missing a key concept here. And Now: After a host of tips/tricks such as rolling back by VirtualBox install, uninstalling/reinstalling Vagrant and VritualBox several times, when I try to run vagrant ssh-config with a Vagrantfile based on the same hashicorp/precise32 it says that the box is not enabled for SSH. Specifically, this error: The provider for this Vagrant-managed machine is reporting that it is not yet ready for SSH. Depending on your provider this can carry different meanings. Make sure your machine is created and running and try again. Additionally, check the output of `vagrant status` to verify that the machine is in the state that you expect. If you continue to get this error message, please view the documentation for the provider you're using. So now I am slightly up a creek. Any help would be appreciated if not just clarifying a concept. Some pertinent info: I'm on OSX Maverics Due to the fact I'm running a dual HD system with system files on one HD and user files on another, my permissions are a little wonky and VBoxManage will only let me run commands via Sudo - not sure if it's pertinent - but maybe. I have no idea what I'm doing. That part is perhaps more important.

  Read the article

• Is it possible to change an "Unidentified Network" into a "Home" or "Work" network on Windows 7

  - by Rhys

  I have a problem with Windows 7 RC (7100). I frequently use a crossover network cable on WinXP with static IP addresses to connect to various industrial devices (e.g. robots, pumps, valves or even other Windows PCs) that have Ethernet network ports. When I do this on Windows 7, the network connection is classed as an "Unidentified Network" in Networks and Sharing Center and the public firewall profile is enforced by Windows. I do not want to change the public profile and would prefer to use the Home or Work profile instead. For other networks like Home and Work I'm able to click on them and change the classification. This is not available for unidentified networks. My questions are these:- Is there a way to manual override the "Unidentified Network" classification? What tests are performed on the network that fail, therefore classifying it as an "Unidentified Network" By googling (hitting mainly vista issues) it seems that you need to ensure that the default gateway is not 0.0.0.0. I've done this. I've also tried to remove IPv6 but this does not seem possible on Windows 7. UPDATE For those still having problems here is the answer to my issue and the possible reasons why:- Win7 keeps a list of the networks you visit by (I am assuming, but don’t know for sure) the MACID of the device pointed to by the Default Gateway. The default gateway is usually the constant device in a network (i.e. the NAT or router) so can be used to uniquely identify one network from another. The default gateway in the IPv4 properties panel must therefore point to an actual endpoint so windows can then keep track of it. If there is a device at the end of the Default Gateway windows will identify it and track it remembering its settings. The ways you can therefore fool Win7 is to either point the default gateway to your own IP address, or the IP address of the target device you’re communicating with. This will have the side effect of expecting that target device to start routing packets for IP destinations that are outside your subnet. So some applications on Win7 will try to communicate with the internet, these will be passed on to the default gateway (either back you the same IP address or a target device that is not a router) and thus will eventually timeout because neither can route packets. Which you can usually live with. This gets slightly complicated when you mix a this type of connection with a real connection to the internet via WIFI. The wired network card usually has priority when routing because of the “interface metric” so some applications might not connect correctly.

  Read the article

• mac + parallels and https site test = router restarts

  - by Erik

  Ok I have an interesting & very frustrating problem happening. I'm going to explain it the best I can. I work as a graphic designer & web designer on a mac and have a Comcast internet connection that comes through a Comcast branded router (SMC8014) which then ties into an Airport Extreme Base Station which runs my office network. I run OS 10.5.7 and also run Parallels 4.0.3 (running Windows XP) for testing websites in Internet Explorer and so on. Ok, so that the basic background. Here's my issue. I've been collaborating an ecommerce website with another designer/developer and when testing the site on the PC side we have started to run into some sort of network problem. The site is https if that matters at all I suspect it may. Basically when I run parallels for testing I am constantly having to restart the router in order to connect to the test site (it's hosted). Funny thing is I can access the rest of the internet fine, just not this site I'm working on until I restart the router (It's sorta like the site is timing out). This never happens when just running the Mac side of things. It only becomes an issue when Parallels is open and I am doing page refreshes while making css or HTML edits via something like Coda or CSS edit (connected to the hosting server via ftp). The real problem is that once the problem starts I only get about 2 or 3 page loads before I have to restart the router again. It's absolutely crippling. I cannot get any work done when I have to restart the router every couple of minutes. So, if you think this problem is isolated to me, the answer is no. The designer/developer I'm collaborating with has an office a couple miles away and experiences very similar problems under slightly different setup. He also has Comcast as his internet provider and connects his router to an Airport and primarily works on a mac. The main difference is that rather than using a visualizer like parallels to test the website on the PC he uses a real live PC that is on his network. Once he fire up the PC to do testing he runs into the same issue described above. After a couple of page refreshes in Internet Explorer or other browser on the PC the site becomes unresponsive and the router has to get restarted. Any thoughts on what is going on here would be greatly appreciated. Thanks in advance.

  Read the article

• How to Configure Source NAT (Private IP => Public IP Outbound)

  - by DavidScherer

  I'm running VMWare ESXi Free and have Zentyal SBS 3.2 running as a Gateway. I have 5 Public IPS (CIDR/29, let's call them 69.1.1.1 - 69.1.1.5) and currently Zentyal is bound to 69.1.1.1 as the Gateway, with the other 4 Public IPs set as Virtual Interfaces in Zentyal (wan2-wan5) I have machines sitting on the Private Network (10.34.251.x) that, when going Outbound (to Google for instance) should be seen by the Internet as an IP other than the Gateway (69.1.1.1), this is because our machines need to be able to communicate with 3rd party APIs that expect these requests to come from a specific IP. From what I could find, SNAT (Source NAT) in Zentyal is used to achieve this, but I'm not sure how to configure it and cannot find a specific piece of Documentation for it at Zentyal. I've tried setting this up a couple different ways, with no results and at this point I have no idea if I'm going about this completely wrong, or my lack of experience with networking and the associated terminology is preventing me from placing the correct values in the correct fields. I get the following form to set up "SNAT" rules in Zentyal: Perhaps someone can offer some guidance and definitions for the fields above? SNAT Address Is this the Public IP I want to masquerade? Outgoing Interface Should this by my External NIC (one connected to Public 'Net), or is it the "Private" interface? It sounds as though this should be the External interface as I want the traffic from the internal network sent Out over this Interface (using a different IP than normal, anyway) Source Is the the Source on the internal network (one of the private IPs?), a public IP I want to masquerade as, or something else entirely? Destination Is this a place on the Internet (eg, "Only do this for the Site Google.com"/IP) or am I allowing myself to become confused again? Service I'm assuming this allows me to restrict which services this rule will apply to, but is it for a service on the internal network or a service being accessed on the external network? If I can offer any further details or information to make what I'm trying to do more clear, I will happily do so. Honestly any kind of help here would be very appreciated. I'm not a NetOps or anything even close, I spend most of my day writing code and my entire "team" at this company consists of "me, myself, and I" so while I try to broaden my KB at every possible opportunity, I can only learn so much, so fast and I feel like with networking especially there's just so much, coupled with a learning curve for each solution that likes to (from my limited perspective) use slightly different terminology that what I'm used to (and I don't exactly have the necessary experience to cross reference this stuff with the stuff I already know in context).

  Read the article

• Lighttpd with FastCGI configuration running ViewVC - rewrite problems

  - by 0xC0000022L

  At the moment I am struggling with the configuration of lighttpd together with ViewVC. The configuration was ported from Apache 2.2.x, which is still running on the machine, serving the WebDAV/SVN stuff, being proxied through. Now, the problem I am having appears to be with the rewrite rules and I'm not really sure what I am missing here. Here's my configuration (slightly condensed to keep it concise): var.hgwebfcgi = "/var/www/vcs/bin/hgweb.fcgi" var.viewvcfcgi = "/var/www/vcs/bin/wsgi/viewvc.fcgi" var.viewvcstatic = "/var/www/vcs/templates/docroot" var.vcs_errorlog = "/var/log/lighttpd/error.log" var.vcs_accesslog = "/var/log/lighttpd/access.log" $HTTP["host"] =~ "domain.tld" { $SERVER["socket"] == ":443" { protocol = "https://" ssl.engine = "enable" ssl.pemfile = "/etc/lighttpd/ssl/..." ssl.ca-file = "/etc/lighttpd/ssl/..." ssl.use-sslv2 = "disable" setenv.add-environment = ( "HTTPS" => "on" ) url.rewrite-once += ("^/mercurial$" => "/mercurial/" ) url.rewrite-once += ("^/$" => "/viewvc.fcgi" ) alias.url += ( "/viewvc-static" => var.viewvcstatic ) alias.url += ( "/robots.txt" => var.robots ) alias.url += ( "/favicon.ico" => var.favicon ) alias.url += ( "/mercurial" => var.hgwebfcgi ) alias.url += ( "/viewvc.fcgi" => var.viewvcfcgi ) $HTTP["url"] =~ "^/mercurial" { fastcgi.server += ( ".fcgi" => ( ( "bin-path" => var.hgwebfcgi, "socket" => "/tmp/hgwebdir.sock", "min-procs" => 1, "max-procs" => 5 ) ) ) } else $HTTP["url"] =~ "^/viewvc\.fcgi" { fastcgi.server += ( ".fcgi" => ( ( "bin-path" => var.viewvcfcgi, "socket" => "/tmp/viewvc.sock", "min-procs" => 1, "max-procs" => 5 ) ) ) } expire.url = ( "/viewvc-static" => "access plus 60 days" ) server.errorlog = var.vcs_errorlog accesslog.filename = var.vcs_accesslog } } Now, when I access the domain.tld, I correctly see the index of the repositories. However, when I look at the links for each respective repository (or click them, for that matter), it's of the form https://domain.tld/viewvc.fcgi/reponame instead of the intended https://domain.tld/reponame. What do I have to change/add to achieve this? Do I have to "abuse" the index file mechanism somehow? Goal is to keep the /mercurial alias functional. So far I've tried sifting through the lighttpd book from Packt again, also through the lighttpd documentation, but found nothing that seemed to match the problem.

  Read the article

• Sycronizing/deploying scripts across several systems

  - by otto

  I have a few time consuming tasks that I like to spread across several computers. These tasks require running an identical ruby or python script (or series of scripts that call each other) on each machine. The machines will a separate config file telling the script what portion of the task to complete. I want to figure out the best way to syncronize the scripts on these machines prior to running them. Up until now, I have been making changes to a copy of the script on a network share and then copying a fresh copy to each machine when I want to run it. But this is cumbersome and leaves a chance for error ( e.g missing a file on the copy or not clicking "copy and replace"). Lets assume the systems are standard windows machines that are not dedicated to this task and I don't need to run these scripts all the time (so I don't want a solution that runs 24/7 and always keeps them up to date, I'd prefer something that pushes/pulls on command). My thoughts on various options: Simple adaptation of my current workflow: Keep the originals on the network drive, but write a batch file that copies over the latest version of the scripts so everything is a one-click operation. Requires action on each system, but that's not the end of the world (since each one usually needs their configuration file changed slightly too). Put everything in a Mercurial/Git reposotory and pull a fresh copy onto each node. Going straight to the repo from each machine would guarantee a current version (and would have the fringe benefit of allowing edits to the script to be made from any machine). Cons would be that it requires VCS to be installed on each machine and there might be some pains dealing with authentication since I wouldn't use a public repo. Open up write access on a shared folder and write a script to use rsync (or similar) to push the changes out to all of the machines at once. This gets a current version on every machine (though you would have to change the script if you want to omit a machine or add a new one). Possible issue would be that each computer has to allow write access. Dropbox is a reasonable suggestion (and could work well) but I dont want to use an external service and I'd prefer not to have to have dropbox running 24/7 on systems that would normally not need it. Is there something simple that I am missing? Some tool designed expressly for doing this kind of thing? Otherwise I am leaning toward just tying all of the systems into Mercurial since, while it requires extra software, it is a little more robust than writing a batch file (e.g. if I split part of a script into a separate module, Mercurial will know what to do whereas I would have to add a line to the batch file).

  Read the article

• VirtualBox Port Forward not working when Guest IP *IS* specified (while doc says opposite)

  - by Patrick

  Trying to port forward from host (Mac OS X) 127.0.0.1:8282 - guest (CentOS)'s 10.10.10.10:8080. Existing port forwards include 127.0.0.1:8181 and 9191 to guest without any IP specified (so whatever it gets through DHCP, as explained in the documentation). Here is how the non-working binding was added: VBoxManage modifyvm "VM name" --natpf1 "rule3,tcp,127.0.0.1,8282,10.10.10.10,8080" Here is how the working ones were added: VBoxManage modifyvm "VM name" --natpf1 "rule1,tcp,127.0.0.1,8181,,80" VBoxManage modifyvm "VM name" --natpf1 "rule2,tcp,127.0.0.1,9191,,9090" And by "non-working", I of course mean not listening (as a prerequisite to forwarding): $ lsof -Pi -n|grep Virtual|grep LISTEN VirtualBo 27050 user 21u IPv4 0x2bbdc68fd363175d 0t0 TCP 127.0.0.1:9191 (LISTEN) VirtualBo 27050 user 22u IPv4 0x2bbdc68fd0e0af75 0t0 TCP 127.0.0.1:8181 (LISTEN) There should be a similar line above but with 127.0.0.1:8282. Just to be clear, this port is listening perfectly fine on the guest itself. And when I remove the guest IP (i.e., clear the 10.10.10.10) the forward works fine, albeit to eth0 (not eth1 where I need it). I can tcpdump and watch the traffic flow back and forth. And yes, I've disabled iptables entirely while testing -- it's not getting blocked anywhere on the guest. As VirtualBox writes in their documentation, you are required to specify the guest IP if it's static (makes sense, no DHCP record it keeps): "If for some reason the guest uses a static assigned IP address not leased from the built-in DHCP server, it is required to specify the guest IP when registering the forwarding rule:". However, doing so (as I need to), seems to break the port forward with nary a report in any log file I can find. (I've reviewed everything in ~/Library/VirtualBox/). Other notes: While I used the above command to add the third rule, I've also verified it showed up correctly in GUI and then removed/re-added from there just to make sure). This forum link -- while very dated -- looks somewhat related in that a port forward to a static IP was not appearing (perhaps they think due to lack of gratuitous arp being sent for host to know IP is there/avail?). Anyway, what gives? Is this still buggy? Any suggestions? If not, easy enough workarounds? What's interesting is that this works perfectly fine on another user's Mac, however he's running a slightly older version (4.3.6 v. 4.3.12).

  Read the article

• Apache's htcacheclean doesn't scale: How to tame a huge Apache disk_cache?

  - by flight

  We have an Apache setup with a huge disk_cache (500.000 entries, 50 GB disk space used). The cache grows by 16 GB every day. My problem is that the cache seems to be growing nearly as fast as it's possible to remove files and directories from the cache filesystem! The cache partition is an ext3 filesystem (100GB, "-t news") on an iSCSI storage. The Apache server (which acts as a caching proxy) is a VM. The disk_cache is configured with CacheDirLevels=2 and CacheDirLength=1, and includes variants. A typical file path is "/htcache/B/x/i_iGfmmHhxJRheg8NHcQ.header.vary/A/W/oGX3MAV3q0bWl30YmA_A.header". When I try to call htcacheclean to tame the cache (non-daemon mode, "htcacheclean-t -p/htcache -l15G"), IOwait is going through the roof for several hours. Without any visible action. Only after hours, htcacheclean starts to delete files from the cache partition, which takes a couple more hours. (A similar problem was brought up in the Apache mailing list in 2009, without a solution: http://www.mail-archive.com/[email protected]/msg42683.html) The high IOwait leads to problems with the stability of the web server (the bridge to the Tomcat backend server sometimes stalls). I came up with my own prune script, which removes files and directories from random subdirectories of the cache. Only to find that the deletion rate of the script is just slightly higher than the cache growth rate. The script takes ~10 seconds to read the a subdirectory (e.g. /htcache/B/x) and frees some 5 MB of disk space. In this 10 seconds, the cache has grown by another 2 MB. As with htcacheclean, IOwait goes up to 25% when running the prune script continuously. Any idea? Is this a problem specific to the (rather slow) iSCSI storage? Should I choose a different file system for a huge disk_cache? ext2? ext4? Are there any kernel parameter optimizations for this kind of scenario? (I already tried the deadline scheduler and a smaller read_ahead_kb, without effect).

  Read the article

• Where is my app.config for SSIS?

  Sometimes when working with SSIS you need to add or change settings in the .NET application configuration file, which can be a bit confusing when you are building a SSIS package not an application. First of all lets review a couple of examples where you may need to do this. You are using referencing an assembly in a Script Task that uses Enterprise Library (aka EntLib), so you need to add the relevant configuration sections and settings, perhaps for the logging application block. You are using using Enterprise Library in a custom task or component, and again you need to add the relevant configuration sections and settings. You are using a web service with Microsoft Web Services Enhancements (WSE) 3.0 and hosting the proxy in SSIS, in an assembly used by your package, and need to add the configuration sections and settings. You need to change behaviours of the .NET framework which can be influenced by a configuration file, such as the System.Net.Mail default SMTP settings. Perhaps you wish to configure System.Net and the httpWebRequest header for parsing unsafe header (useUnsafeHeaderParsing), which will change the way the HTTP Connection manager behaves. You are consuming a WCF service and wish to specify the endpoint in configuration. There are no doubt plenty more examples but each of these requires us to identify the correct configuration file and and make the relevant changes. There are actually several configuration files, each used by a different execution host depending on how you are working with the SSIS package. The folders we need to look in will actually vary depending on the version of SQL Server as well as the processor architecture, but most are all what we can call the Binn folder. The SQL Server 2005 Binn folder is at C:\Program Files\Microsoft SQL Server\90\DTS\Binn\, compared to C:\Program Files\Microsoft SQL Server\100\DTS\Binn\ for SQL Server 2008. If you are on a 64-bit machine then you will see C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\ for the 32-bit executables and C:\Program Files\Microsoft SQL Server\90\DTS\Binn\ for 64-bit, so be sure to check all relevant locations. Of course SQL Server 2008 may have a C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\ on a 64-bit machine too. To recap, the version of SQL Server determines if you look in the 90 or 100 sub-folder under SQL Server in Program Files (C:\Program Files\Microsoft SQL Server\nn\) . If you are running a 64-bit operating system then you will have two instances program files, C:\Program Files (x86)\ for 32-bit and  C:\Program Files\ for 64-bit. You may wish to check both depending on what you are doing, but this is covered more under each section below. There are a total of five specific configuration files that you may need to change, each one is detailed below: DTExec.exe.config DTExec.exe is the standalone command line tool used for executing SSIS packages, and therefore it is an execution host with an app.config file. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DTExec.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. DtsDebugHost.exe.config DtsDebugHost.exe is the execution host used by Business Intelligence Development Studio (BIDS) / Visual Studio when executing a package from the designer in debug mode, which is the default behaviour. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DtsDebugHost.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. This may surprise some people as Visual Studio is only 32-bit, but thankfully the debugger supports both. This can be set in the project properties, see the Run64BitRuntime property (true or false) in the Debugging pane of the Project Properties. dtshost.exe.config dtshost.exe is the execution host used by what I think of as the built-in features of SQL Server such as SQL Server Agent e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\dtshost.exe.config This file can be found in both the 32-bit and 64-bit Binn folders devenv.exe.config Something slightly different is devenv.exe which is Visual Studio. This configuration file may also need changing if you need a feature at design-time such as in a Task Editor or Connection Manager editor. Visual Studio 2005 for SQL Server 2005  - C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\devenv.exe.config Visual Studio 2008 for SQL Server 2008  - C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe.config Visual Studio is only available for 32-bit so on a 64-bit machine you will have to look in C:\Program Files (x86)\ only. DTExecUI.exe.config The DTExec UI tool can also have a configuration file and these cab be found under the Tools folders for SQL Sever as shown below. C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe A configuration file may not exist, but if you can find the matching executable you know you are in the right place so can go ahead and add a new file yourself. In summary we have covered the assembly configuration files for all of the standard methods of building and running a SSIS package, but obviously if you are working programmatically you will need to make the relevant modifications to your program’s app.config as well.

  Read the article

• Add Your Own Domain to Your WordPress.com Blog

  - by Matthew Guay

  Now that you’ve got a nice blog on WordPress.com, why not get your own domain to brand your site?  Here’s how you can easily register a new domain or move your existing domain to your WordPress site. By default, your free WordPress address is yourblog’sname.wordpress.com.  But whether this is a personal or a company blog, it can be nice to have your own domain to really brand your site and make it your own.  Or, if you already have another website and want to use WordPress as a blog for it, you could even add blog.yoursite.com or any other subdomain. Adding a domain to your WordPress.com is a paid upgrade; registering and mapping a new domain to your account costs $14.97 a year, while mapping a domain you already own to your WordPress blog costs $9.97 a year. Getting Started Login to your blog’s dashboard, click the arrow beside Upgrades in the sidebar, and select Domains. Enter the domain or subdomain you want to add to your site in the text box, and click Add domain to blog.   If you entered a new domain you want to register, WordPress will make sure the domain is available and then present you a registration form to register the domain.  Enter your information, and then click Register Domain.   Or, if you enter a domain that’s already registered, you will see the following prompt. If this domain is a domain you own, you can map it to WordPress.com.  Login to your domain registrar account and switch your nameserver to: NS1.WORDPRESS.COM NS2.WORDPRESS.COM NS3.WORDPRESS.COM Your DNS settings page for your domain may be different, depending on your registrar.  Here’s how our domain settings looked. Alternately, if you’re wanting to map a subdomain, such as blog.yoursite.com to your WordPress blog, create the following CNAME record on your domain register.  You may have to contact your domain registrar’s support to do this.  Substitute your subdomain, domain, and blog name when creating the record. subdomain.yourdomain.com. IN CNAME yourblog.wordpress.com. Once your settings are correct, click Try Again in your WordPress dashboard.  The DNS settings may take a while to update, but once WordPress can tell your DNS settings point to it, you will see the following confirmation screen.  Click Map Domain to add this domain to your WordPress blog. Now you’re ready to pay for your domain mapping or registration.  Depending on your purchase, the information and price shown may be different.  Here we’re mapping a domain we already have registered, so it costs $9.97.  Select your method of payment, enter your payment information or signin with your Paypal account, and continue as usual. Once your purchase is finished, you’ll be returned to the Domains page on WordPress.  Try going to your new domain, and make sure it opens your blog.  If it works, then click the bullet beside the new domain, and click Update Primary Domain.  Now, when people visit your WordPress site, they’ll see your new domain in the address bar.  You can still access your blog from your old yourname.wordpress.com address, but it will redirect to you new domain. Conclusion Having a personalized domain is a great way to make your blog more professional, while still taking advantage of the ease of use that WordPress.com offers.  And, if you have your own domain, you can easily move to your site traffic to a different hosting provider in the future if you need to.  The process is slightly complicated, but for $15/year we found this one of the best upgrades you could do to your WordPress.com blog. If you want to see an example of a site created with Wordpress, check out Matthew’s tech site techinch.com. And, if you’re just getting started with WordPress, check out our series on how to Start your WordPress.com blog, Personalize it, and Easily Post Content to it from anywhere. Similar Articles Productive Geek Tips Add Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek SoftwareHow To Start Your Own Professional Blog with WordPressDisable Logon to Windows Computers When Not Connected to a DomainMake a Backup Copy of your Production Wordpress Blog on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule

  Read the article

• Our Look at the Internet Explorer 9 Platform Preview

  - by Asian Angel

  Have you been hearing all about Microsoft’s work on Internet Explorer 9 and are curious about it? If you are wanting a taste of the upcoming release then join us as we take a look at the Internet Explorer 9 Platform Preview. Note: Windows Vista and Server 2008 users may need to install a Platform Update (see link at bottom for more information). Getting Started If you are curious about the systems that the platform preview will operate on here is an excerpt from the FAQ page (link provided below). There are two important points of interest here: The platform preview does not replace your regular Internet Explorer installation The platform preview (and the final version of Internet Explorer 9) will not work on Windows XP There really is not a lot to the install process…basically all that you will have to deal with is the “EULA Window” and the “Install Finished Window”. Note: The platform preview will install to a “Program Files Folder” named “Internet Explorer Platform Preview”. Internet Explorer 9 Platform Preview in Action When you start the platform preview up for the first time you will be presented with the Internet Explorer 9 Test Drive homepage. Do not be surprised that there is not a lot to the UI at this time…but you can get a good idea of how Internet Explorer will act. Note: You will not be able to alter the “Homepage” for the platform preview. Of the four menus available there are two that will be of interest to most people…the “Page & Debug Menus”. If you go to navigate to a new webpage you will need to go through the “Page Menu” unless you have installed the Address Bar Mini-Tool (shown below). Want to see what a webpage will look like in an older version of Internet Explorer? Then choose your version in the “Debug Menu”. We did find it humorous that IE6 was excluded from the choices offered. Here is what the URL entry window looks like if you are using the “Page Menu” to navigate between websites. Here is the main page of the site here displayed in “IE9 Mode”…looking good. Here is the main page viewed in “Forced IE5 Document Mode”. There were some minor differences (colors, sidebar, etc.) in how the main page displayed in comparison to “IE9 Mode”. Being able to switch between modes makes for an interesting experience… As you can see there is not much to the “Context Menu” at the moment. Notice the slightly altered icon for the platform preview… “Add” an Address Bar of Sorts If you would like to use a “make-shift” Address Bar with the platform preview you can set up the portable file (IE9browser.exe) for the Internet Explorer 9 Test Platform Addressbar Mini-Tool. Just place it in an appropriate folder, create a shortcut for it, and it will be ready to go. Here is a close look at the left side of the Address Bar Mini-Tool. You can try to access “IE Favorites” but may have sporadic results like those we experienced during our tests. Note: The Address Bar Mini-Tool will not line up perfectly with the platform preview but still makes a nice addition. And a close look at the right side of the Address Bar Mini-Tool. In order to completely shut down the Address Bar Mini-Tool you will need to click on “Close”. Each time that you enter an address into the Address Bar Mini-Tool it will open a new window/instance of the platform preview. Note: During our tests we noticed that clicking on “Home” in the “Page Menu” opened the previously viewed website but once we closed and restarted the platform preview the test drive website was the starting/home page again. Even if the platform preview is not running the Address Bar Mini-Tool can still run as shown here. Note: You will not be able to move the Address Bar Mini-Tool from its’ locked-in position at the top of the screen. Now for some fun. With just the Address Bar Mini-Tool open you can enter an address and cause the platform preview to open. Here is our example from above now open in the platform preview…good to go. Conclusion During our tests we did experience the occasional crash but overall we were pleased with the platform preview’s performance. The platform preview handled rather well and definitely seemed much quicker than Internet Explorer 8 on our test system (a definite bonus!). If you are an early adopter then this could certainly get you in the mood for the upcoming beta releases! Links Download the Internet Explorer 9 Preview Platform Download the Internet Explorer 9 Test Platform Addressbar Mini-Tool Information about Platform Update for Windows Vista & Server 2008 View the Internet Explorer 9 Platform Preview FAQ Similar Articles Productive Geek Tips Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPMake Ctrl+Tab in Internet Explorer 7 Use Most Recent OrderRemove ISP Text or Corporate Branding from Internet Explorer Title BarWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer?Prevent Firefox or Internet Explorer from Printing the URL on Every Page TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses

  Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >