Search Results

Search found 17187 results on 688 pages for 'vpn connection'.

Page 78/688 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• VPN access configuration with ForeFront TMG

  - by Yang

  I am trying to configure VPN Client access with ForeFront TMG. When I try to add domain groups to allow access to them, under Group column I can only see the SID of the domain group. And the Domain column ends up empty. ForeFront TMG is joined to the domain. Can you think of a reason?

  Read the article

• Do I need a wifi card to have internet access?

  - by Sarah

  I am attempting to set up a wireless network on 11.04, freshly download today. The router is on and working. However, I do not have a wifi "card" (which I am assuming is a little USB-type thing that allows internet access, but correct me if I am wrong) and every time I try to type in the MAC address and everything, nothing works. I also get the "firmware missing" error when I scroll over the signal strength, which I have tried looking up but have been unsuccessful with completely understanding it. I guess my main question is do I need another little device to be able to use wifi on my ubuntu? I do have an ethernet cable but another person is using it and I do not want to be tied down to that cable. the problem is that none of the wireless networks show up, however they show up when I go into Windows mode on my laptop. I get an error message at the top saying "firmware missing" which I have tried looking up but still have no straight answer for.

  Read the article

• Net send question

  - by somacore

  I'm on a work laptop. If I do a 'net send' to all computers on the domain while not VPN'd into the network, and it says it's successful, one of the following is true: It failed, but thinks it's successful, and it won't send anything. It failed, but it will send next time it's on the work domain. I know I was off the domain when I sent it (I made sure of that first). What will happen?

  Read the article

• Wireless speed drops over time and doesn't get up if not reconnected

  - by Vili Lehto

  I am using Ubuntu 12.10 64bit and I have a Asus PCE-N15 wireless card(in PCI-E slot). The problem is that first when I connect to my WiFi network the speed is just fine, and actually my link speed never drops, it shows a solid 150mb/s+ link speed and good signal. But the download and upload speeds drop dramatically after couple minutes of use and I have to reconnect to fix this. Network is type IEEE 802.11bgn and uses WPA2/AES encryption. I don't have similar problems on the windows side, and the network is working fine on every other device. iwconfig shows this: wlan0 IEEE 802.11bgn ESSID:"WLAN-AP" Mode:Managed Frequency:2.412 GHz Access Point: 00:1E:AB:05:EF:31 Bit Rate=300 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr=2347 B Fragment thr:off Encryption key:off Power Management:off Link Quality=61/70 Signal level=-49 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:2 Missed beacon:0 So the question is: Is there a way to fix this? Thanks in advance.

  Read the article

• How can I prioritize wireless networks with network-manager

  - by kynan

  Mostly I use my laptop in an environment where different wireless networks are available and I would like to preferably connect to one of those and only fall back to the other one if that one is not available. Is there any way of prioritizing which wireless networks network-manager preferably connects to? The only workaround I found so far was unchecking Connect Automatically in the options and re-enabling it when my preferred network is not available.

  Read the article

• Internet stopped working after aircrack install (can still connect to my router). Suggestions?

  - by Dan

  I'm sure I did something dumb during the install for aircrack, but I have no clue what. Like I said, I can connect to my router (not trying to crack, simply logging into it), I just can't get internet access. To make this more interesting, the machine is dual booted and when I log into Windows I have zero issues. I feel like some driver may have been messed up in the process, but I'm not sure if that's a reasonable assumption or how exactly to check that. Also, can't revert to backup as there are none. Suggestions on how to trouble-shoot would be appreciated. EDIT: Hard-wiring to the wall I can get internet access on the Ubuntu side... PS- I know this is a stretch as far as fitting the Ubuntu section, but no other stackoverflow sites seemed to fit better.

  Read the article

• Ubuntu connects to wireless but doesn't work!

  - by UbuntuUser990

  I just installed Ubuntu 14.04 LTS on my laptop, it connects to my wireless network and shows that it is connected, but when I try to load a webpage or do anything like download Steam for Dota 2, it doesn't work. When I try to connect my Facebook account to Ubuntu, it doesn't work. I want to be able to use Ubuntu with working internet access. What do I do?. ifconfig this shows up eth0 Link encap:Ethernet HWaddr 88:ae:1d:60:56:eb inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) When I type ping askubuntu.com this shows up ping: unknown host askubuntu.com

  Read the article

• Sharing folder in a Virtual Private Windows Server 2008 R2 ?

  - by Triztian

  See Edit 2: Hello all, seems my involvement with computers has grown and I've found my self in the need to access a shared folder on a server. I've read some documentation and managed to set up the folder as a share, for this I created a local group and for now just one local user that has access to the share, the folder is in the public user folder and it's permissions should be (and I believe they are) read/write. The problem is that I can't connect from a remote machine I mean I don't know how the way it should be accessed, the server has a public IP and we use it also as a host to our website I don't know if that affects it though, the folder will be used as the "keeper" for the QuickBooks company files and has the database server manager installed. I've tried setting up a VPN Connection to the but no success. The server has a domain name a "http://www.example.com" that redirects to our website, I am unsure if it could be accessed that way, also the share has a location displayed when I right-click properties Heres what I've tried Setting up a VPN Connection (Windows Vista and 7) Got to the point where I got asked for credential and entered the user I created (which is not an admin) but I got a "Connection fail error 800" I suppose this is because in the domain field I entered the servers workgroup. right-click add network connection (Windows 7) Went through the wizard until I reached the point of entering the location, tried many things, the name in the share's properties(\\SOMETHING\Share), the http://www.example.com , the IP address I'm quite unfamiliar with this, so I have my guesses: Since the group and user are local they do not have access to the folder. The firewall in the server is blocking my connection. Anyways, any help and guidence is truly appreciated. EDIT 1: As @tony roth pointed out it may be a security fail, an I commented it out to management and said that that is not an issue, so please bare with me. EDIT 2: I've found out that the real question could be streamlined to "Sharing folder in a Virtual Private Server?", as thats what we have, a virtual private windows server 2008 R2, and I would like to know how to make it show like a normal folder in the client computer. Thanks again for all of your support.

  Read the article

• Peer to Peer solution for LAN over Internet

  - by Coyote

  I need to emulate a LAN between some machines over the internet to play some LAN only games. I remember that there was software that could do this, but don't remember what it was called. Anyone heard of this, or know of similar solutions that won't require a lot of work? The game is fun, but not fun enough to bother with setting up a VPN server. ;-)

  Read the article

• Cisco ASA 5520 - differential routing policies based on userid

  - by devviedev

  Hi, excuse me if my terminology is not correct. We are using WebVPN to VPN into an Cisco ASA 5520. We want to have different rules that allow the user that VPNs into the network to access certain things based on their RSA SecurID authentication userid. Is this possible? If so, are there some good examples of how to achieve this?

  Read the article

• What ports should I open for listen and/or transmit in my firewall to keep internet ok?

  - by H_7

  What are the minimum ports and services that should I allow/open for listen and/or transmit in my firewall (I am using Firestarter) to keep my internet running ok? Some talk about what services, which port uses, and why it matters should be nice too. Thanks for any advice. I have some bet to the answer 80 http 443 https 53 dns EDIT: I will just browse some sites. I have a windows virtual machine, so I ll use it too, bu t just normal navigation too. No torrents, IRC's, FLASH, etc.. Thanks for attention. hmmm... lost! Linux Mint 9 here.

  Read the article

• Issue with setting up multiple IP addresses on ubuntu server installation

  - by varunyellina

  I want to setup two ip addresses on my system for access through lan. This is my config on my other system. Desktop Installation My desktop installation runs with multiple IP's added through networkmanager both through lan and wifi. Server Installation On my server install I've edited /etc/network/interfaces to the following. auto eth0 auto eth0:1 # IP-1 iface eth0 inet static address 172.16.35.35 network 172.16.34.1 netmask 255.255.254.0 broadcast 172.166.35.255 dns-nameservers 172.16.100.221 8.8.8.8 # IP-2 iface eth0:1 inet static address 172.16.34.34 network 172.16.34.1 netmask 255.255.254.0 gateway 172.16.34.1 broadcast 172.16.35.255 After restarting through "/etc/init.d/networking restart" I recieve "Failed to bring up eth0:1" What am I doing wrong? Thankyou.

  Read the article

• "The system is running in low graphics mode", unable to connect to the Internet

  - by Blah

  When I try to log onto Ubuntu, I get a notice that reads: The system is running in low graphics mode. I searched for a solution and there are a slew of answers. However, many of them seem to suggest reinstalling different things. After pressing Ctrl+Alt+F1 and getting to a terminal, I attempt commands like sudo apt-get install example. Upon doing so I get notices that say things such as could not resolve host which I am assuming means I'm not connected to the Internet. Since I can not connect to the Internet, none of these responses are helpful to me. What can I do?

  Read the article

• ubuntu 12.04 internet stopped working

  - by Daniel

  My laptop was running smoothly until yesterday. Today, I can't connect to the internet at home anymore. I am only able to access the router, but no internet access. A have a Dell Latitude E6320 with ubuntu 12.04. At my job, I don't have any problems connecting this laptop both via wireless and ethernet. At home, if I try connecting it through Windows it does work fine. I even checked the MAC addess and it's OK. My other laptop, which also runs ubuntu, is not facing this problem. I have already tried to restart and downgrade network-manager package and its dependecies. Anyone can help me please??? I am affraid I will have to reinstall everything...

  Read the article

• Internet stopped working suddenly on 12.04

  - by Daniel

  My laptop was running smoothly until yesterday. Today, I can't connect to the Internet at home anymore. I am only able to access the router, but no Internet access. A have a Dell Latitude E6320 with Ubuntu 12.04. At my job, I don't have any problems connecting this laptop both via Wireless and Ethernet. At home, if I try connecting it through Windows, it does work fine. I even checked the MAC address and it's OK. My other laptop, which also runs Ubuntu, is not facing this problem. I have already tried to restart and downgrade network-manager package and its dependencies. Can anyone help me please? I am afraid, I will have to reinstall everything.

  Read the article

• 12.04 - why does the network icon dissapear every time my machine is turned off

  - by Howard Walker

  After spending an hour or two working out how to find the network Icon, I find that when I reboot the machine, I have to go through the whole procedure again. 1. The network menu is not there - so first I have to find the terminal. This has no particular location that I can find but usually I have to type terminal in the dash. 2. Then I have to type nm-applet in terminal 3. The network manager icon then appears, but only works if the terminal window remains open. Shut down the terminal window and the network disappears. This is a pain - plus I have to type my password in every time, which is another waste of time, thought this has always been a problem. So can anyone tell me how to make the web automatically connect at startup without any intervention from me.

  Read the article

• HP 530 Wireless problem. Bad communication with access point

  - by foxy

  I installed Ubuntu 11.10 on HP 530 and to make Wireless work installed STA driver from jockey (obviously proprietary) and, since it didn't work also installed their driver from HP website via ndiswrapper. After this (and a reboot) I see the WiFi indicator glowing, like it should be, and I am able to find local access points. But when I try to connect to mine personal one with WPA 2 security (with password) it hangs at authentification (I'm using wicd to manage wifi), and after a minute or so (I guess timeout of request happens) it says I have a wrong password (it is 100% correct). What might be the problem here? Yesterday I was able to connect to access point by changing type of encryption from passphrase to preshared key but didn't have internet access. Now, after reboot, I can't connect there again.

  Read the article

• OpenVPN useradd error

  - by zfz

  I tried to install an OpenVPN access server in Centos 6 on a linode VPS. The installation error occours when adding the user "openvpn". However, the installation is okay for my ubuntu 11.10 distro in another VPS. The error message is "useradd: canot open /etc/passwd" The detail of My "/etc/passwd" file: "-rw-r--r-- 1 root root 1194 Oct 9 00:33 /etc/passwd" So how can I add the user "openvpn" to setup the VPN service? Thanks.

  Read the article

• How do I unblock VPM that is blocked by the ISP?

  - by Mohammad

  My ISP has blocked VPN access to the Internet that is a mere cruelty and disjustice. How do I get rid of this VPM block in Windows XP and Internet?

  Read the article

• How do I get an Xstream mobile phone working as a modem?

  - by callmegus

  I bought a CDMA mobile phone that can use as modem, this http://smartfren.com/xstream/ and i wanna try it on my ubuntu plug usb , and run "lsusb" callmegus@Presario-CQ43-304AU:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 058f:a001 Alcor Micro Corp. Bus 003 Device 002: ID 1bbb:0106 T & A Mobile Phones Bus 003 Device 003: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 004 Device 002: ID 0a5c:21e3 Broadcom Corp. I successfully "modprobe" this device, and connect to internet, but it's disconnected somehow .. and i can recconect it. I try "lsusb" again .. and something went wrong, here Bus 003 Device 002: ID 1bbb:1000 T & A Mobile Phones I do "modprobe" again and again , but it still won't connect Please guide me

  Read the article

• Cannot connect to Internet on 11.04 using BSNL EVDO Prithvi Card

  - by Joy

  I cannot connect to Internet using BSNL EVDO Prithvi data card. Went through some websites that offered help, installed wvdial package and tried again, but was unsuccessful. I have Read that, Ubuntu 11.04 automatically detects Data Card, You only need to configure "Network Manager" and it will work, I did exactly that, but the result is same. The OS detects the data card, and the presence of network , but it cannot login. I have read in some forums that Ubuntu 11.04 does not have support for BSNL EVDO Prithvi, is it true? I re-checked the "User ID" and "Password". Its working on Windows. Please help me fix this.

  Read the article

• Does the Ubuntu One sync work?

  - by bisi

  I have been on this for several hours now, trying to get a simple second folder to sync with my (paid) account. I cannot tell you how many times I removed all devices, removed stored passwords, killed all processes of u1, logged out and back in online...and still, the tick in the file browser (Synchronize this folder) is loading and loading and loading. Also, I have logged out, rebooted countless times. And this is after me somehow managing to get the u1 preferences to finally "connect" again. I have also checked the status of your services, and none are close to what I am experiencing. And I have checked the suggested related questions above! So please, just confirm whether it is a problem on my side, or a problem on your side. EDIT: In the mean time, here is what has changed, on top of what is mentioned just above. • My files went from 0MB to 71.9MB, and is still rising. • My first folder of 400.2MB is being filled with the data as I write this. The second folder has the folder sub-structure in place. • Both folders now show in the File Browser that it will be synchronized. I believe that right now, it is all back to normal and working fine, and I guess that's what a good night's sleep can do ;). And we're now only back to the point where synchronizing is slow, but will pick up with the release of Natty (https://wiki.ubuntu.com/UbuntuOne/FAQ/WhyIsItTakingSoLongForMyFilesToSync). But to get to the questions: My about says I use 11.04, Natty Narwhal, but I am quite sure the last distribution I installed was 10.10. Folder A is 400.2MB, and Folder B is 29.5MB I am on a DSL line, behind a regular fritz.box setting. No proxy servers in use, and I did not install any particular firewall features. No physical firewall, just the router (on which I have a TV signal as well), and 2 switches to get to this floor. Status: inactive The ubuntuone-indicator runs the same window as when I click on my name on the top-right corner and select Ubuntu one, or in the Control Center choose Ubuntu one. It wasn't supposed to go further than this was it?

  Read the article

• Does a machine have to be domain joined in order to use Direct Access

  - by Philipp Schmid

  Does a machine (e.g., mobile laptop) have to be domain joined in order to use Direct Access (DA)? Or does DA allow the user to provide credentials just like VPN does when setting up DA?

  Read the article

• Unable to connect to internet

  - by Peter Schriver

  I just upgraded to 12.10. Everything appears to go well but I am unable to connect to the Internet. The LAN is fine and I can view my shared files but no e-mail or access to web pages. My other computer which is running 12.04 or older seems to connect fine. I only upgraded one to make sure things would be ok. I am currently connecting fine with a wireless Windows laptop. Output from cat /etc/resolv.conf # Generated by NetworkManager nameserver 127.0.0.1

  Read the article

• Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

  - by user42424

  So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

  Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >