Search Results

Search found 28223 results on 1129 pages for 'view controller'.

Page 780/1129 | < Previous Page | 776 777 778 779 780 781 782 783 784 785 786 787  | Next Page >

  • VS 11 Beta merge tool is awesome, except for resovling conflicts

    - by deadlydog
    If you've downloaded the new VS 11 Beta and done any merging, then you've probably seen the new diff and merge tools built into VS 11.  They are awesome, and by far a vast improvement over the ones included in VS 2010.  There is one problem with the merge tool though, and in my opinion it is huge.Basically the problem with the new VS 11 Beta merge tool is that when you are resolving conflicts after performing a merge, you cannot tell what changes were made in each file where the code is conflicting.  Was the conflicting code added, deleted, or modified in the source and target branches?  I don't know (without explicitly opening up the history of both the source and target files), and the merge tool doesn't tell me.  In my opinion this is a huge fail on the part of the designers/developers of the merge tool, as it actually forces me to either spend an extra minute for every conflict to view the source and target file history, or to go back to use the merge tool in VS 2010 to properly assess which changes I should take.I submitted this as a bug to Microsoft, but they say that this is intentional by design. WHAT?! So they purposely crippled their tool in order to make it pretty and keep the look consistent with the new diff tool?  That's like purposely putting a little hole in the bottom of your cup for design reasons to make it look cool.  Sure, the cup looks cool, but I'm not going to use it if it leaks all over the place and doesn't do the job that it is intended for. Bah! but I digress.Because this bug is apparently a feature, they asked me to open up a "feature request" to have the problem fixed. Please go vote up both my bug submission and the feature request so that this tool will actually be useful by the time the final VS 11 product is released.

    Read the article

  • How to determine where on a path my object will be at a given point in time?

    - by Dave
    I have map and an obj that is meant to move from start to end in X amount of time. The movements are all straight lines, as curves are beyond my ability at the moment. So I am trying to get the object to move from these points, but along the way there are way points which keep it on a given path. The speed of the object is determined by how long it will take to get from start to end (based on X). This is what i have so far: //get_now() returns seconds since epoch var timepassed = get_now() - myObj[id].start; //seconds since epoch for departure var timeleft = myObj[id].end - get_now(); //seconds since epoch for arrival var journey_time = 60; //this means 60 minutes total journey time var array = [[650,250]]; //way points along the straight paths if(step == 0 || step =< array.length){ var destinationx = array[step][0]; var destinationy = array[step][1]; }else if( step == array.length){ var destinationx = 250; var destinationy = 100; } else { var destinationx = myObj[id].startx; var destinationy = myObj[id].starty; } step++; When the user logs in at any given time, the object needs to be drawn in the correct place of the path, almost as if its been travelling along the path whilst the user has not been at the PC with the available information i have above. How do I do this? Note: The camera angle in the game is a birds eye view so its a straight forward X:Y rather than isometric angles.

    Read the article

  • Effective versus efficient code

    - by Todd Williamson
    TL;DR: Quick and dirty code, or "correct" (insert your definition of this term) code? There is often a tension between "efficient" and "effective" in software development. "Efficient" often means code that is "correct" from the point of view of adhering to standards, using widely-accepted patterns/approaches for structures, regardless of project size, budget, etc. "Effective" is not about being "right", but about getting things done. This often results in code that falls outside the bounds of commonly accepted "correct" standards, usage, etc. Usually the people paying for the development effort have dictated ahead of time what it is that they value more. An organization that lives in a technical space will tend towards the efficient end, others will tend towards the effective. Developers often refuse to compromise their favored approach for the other. In my own experience I have found that people with formal education in software development tend towards the Efficient camp. Those that picked up software development more or less as a tool to get things done tend towards the Effective camp. These camps don't get along very well. When managing a team of developers who are not all in one camp it is challenging. In your own experience, which camp do you land in, and do you find yourself having to justify your approach to others? To management? To other developers?

    Read the article

  • connect two computers together via a rs232 serial port

    - by Richard
    Wondering if anyone knows of a solution to connect with telnet/ssh through a rs232 serial port Edit: I am looking for a way to connect to computers together via a serial port. I want to be able to view the file system of a computer through a serial port.. Is this possible? Edit: So I have successfully connected two computers together using r232 serial ports with a null modem. The instructions I have used are located here Now how do I get to the file system of the host computer?? Any ideas?

    Read the article

  • How can I convince my boss to invest into the developer environment?

    - by user95291
    Our boss said that developers should have fewer mistakes so the company would have money for displays, servers etc. An always mentioned example is a late firing of an underperforming colleague whose salary would have covered some of these expenses. On the other hand it happened a few times that it took a few days to free up some disk space on our servers since we can't get any more disk. The cost of mandays was definitely higher than the cost of a new HDD. Another example is that we use 14-15" notebooks for development and most of the developers get external displays after they spent one year at the company. The price of a 22-24" display is just a small fraction of a developers annual salary. Devs say that they like the company because of other reasons (high quality code, interesting projects etc.) but this kind of issues not just simply time-consuming but also demotivate them. In the point of view of the developers it seems that the boss always can find an issue in the past which they could have been done better so it's pointless to work better to get for a second display/HDD/whatever. How can I convince my boss to invest more into development environment? Is it possible to break this endless loop?

    Read the article

  • CodePlex Daily Summary for Friday, June 06, 2014

    CodePlex Daily Summary for Friday, June 06, 2014Popular ReleasesVirto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.Load Runner - HTTP Pressure Test Tool: Load Runner 1.3: 1. gracefully stop distributed engine 2. added error handling for distributed load tasks if fail to send the tasks. 3. added easter egg ;-) NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...HigLabo: HigLabo_20140605: Modify AsciiCharOnly method implementation. Code clean up of RssItem.Description.51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...Kartris E-commerce: Kartris v2.6003: Bug fixes: Fixed issue where category could not be saved if parent categories not altered Updated split string function to 500 chars otherwise problems with attribute filtering in PowerPack Improvements: If a user has group pricing below that available through qty discounts, that will show in place of the qty discountClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.SEToolbox: SEToolbox 01.032.018 Release 1: Added ability to merge/join two ships, regardless of origin. Added Language selection menu to set display text language (for SE resources only), and fixed inherent issues. Added full support for Dedicated Servers, allowing use on PC without Steam present, and only the Dedicated Server install. Added Browse button for used specified save game selection in Load dialog. Installation of this version will replace older version.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedTEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....Z SqlBulkCopy Extensions: SqlBulkCopy Extensions 1.0.0: SqlBulkCopy Extensions provide MUST-HAVE methods with outstanding performance missing from the SqlBulkCopy class like Delete, Update, Merge, Upsert. Compatible with .NET 2.0, SQL Server 2000, SQL Azure and more! Bulk MethodsBulkDelete BulkInsert BulkMerge BulkUpdate BulkUpsert Utility MethodsGetSqlConnection GetSqlTransaction You like this library? Find out how and why you should support Z Project Become a Memberhttp://zzzproject.com/resources/images/all/become-a-member.png|ht...Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Image View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;Credit Component: Credit Component: This is a sample release of Credit Component that has been made by Microsoft Visual Studio 2010. To try and use it, you need .NET framework 4.0 and Microsoft Visual Studio 2010 or newer as a minimum requirement in this download you will get media player as a sample application that use this component credit component as a main component media player source code as source code and sample usage of credit component credit component source code as source code of credit component important...New ProjectsBack Up Your SharePoint: SPSBackUp is a PowerShell script tool to Backup your SharePoint environment. It's compatible with SharePoint 2010 & 2013.ChoMy: mrkidconsoledemo: a basic app about the knowledge in c# domainDecision Architect Server Client in C#: This project is a client for Decision Architect Server API.InnVIDEO365 Agile SharePoint-Kaltura App: InnVIDEO365 Agile SharePoint - Kaltura App for SharePoint Online is a complete video content solution for Microsoft SharePoint Online.JacOS: JacOS is an open-source operating system created with COSMOSKISS Workflow Foundation: This project was born from the idea that everyone should be able to use Workflow Foundation in best conditions. It contain sample to take WF jump start!Media Player (Technology Area): A now simple, yet somehow complex music, photo viewer I have some plans for the best tools for the player in the futureMetalurgicaInstitucional: MetalurgicaInstitucionalmoodlin8: Moodlin8 try to exploit significant parts of Moodle, the popular LMS, in a mobile or fixed environment based on the Modern Interface of Windows 8.1.NewsletterSystem: This is a test projectpesho2: Ala bala portokalaProyecto web Lab4 Gioia lucas: proyecto para lab4 utn pachecoRallyRacer: TSD Rally Compute helperVideo-JS Webpart for Sharepoint: Video-JS Webpart for SharepointYanZhiwei_CSharp_UtilHelp: ??C#???????????API: ????? Web API

    Read the article

  • Bug fix for Eclipse runtime plugin

    - by Peter Benedikovic
    This blog is intended to inform about bug fix that solves this issue. Before continuing further, one important note – the linux and mac users do not need to read further because this bug appears only on Windows.  The problem was that the runtime plugin registered new runtime and server each time the Eclipse started. Users ended up with server view looking like this: I have created new runtime plugin which is now available at the update site http://download.java.net/glassfish/eclipse/indigo (or the same ending with juno for Juno users). You will still need to unistall the buggy plugin and (optionally but recommended) to remove runtimes created by this plugin. Here is the guide how to install bugfix: Uninstall buggy runtime plugin via menu Help->About Eclipse->Installation details. Remove runtimes created by old plugin – via Window->Preferences->Server->Runtime Environment. After pressing remove button you may be asked if you want to remove also the servers based on runtime being removed. Recommended is to do so. Now you can install new runtime plugin. Go to Help->Install New Software. You may ask why I haven‘t provided the update for buggy runtime which could be installed via Check for updates feature of Eclipse. It has two main reasons: The bug fix is needed only for Windows users so I didn't want to bother other users by updating working plugin. The runtime plugin has had structure that was not quite suitable for Eclipse update. This structure is now changed so future bugs (I am sure that there will be no such ;)) can be fixed by standard update. Have a good one!

    Read the article

  • What is Cloud Computing?

    - by joelvarty
    This is a question that we discuss quite often at Edentity.  It’s one of those things, kind of like “web services” where the terminology has been thrown around by a ton of people and means a lot of different things. Here’s my favorite diagram so far, which is a visual breakdown of the material presented here by NIST, visualized by the folks at Cloud Security Alliance.     What I like about this diagram is that is shows several different ways that we can differentiate our definitions of cloud computing, from the essential characteristics, or which “Broad Network Access" and “On-Demand Self-Service” (which often are used on their own to define cloud computing) are but a couple of things that help make something “cloud”. The most important section from my point of view is the middle one – the Service Models.  This represents the different ways that cloud computing can be exposed from the ground up.  It can be an Infrastructure, a Platform or a piece of Software that an end user interacts with. This is the future, folks. more late - joel

    Read the article

  • Wordnik Accelerator

    - by prabhpreet
    Wow, creating IE Accelerators is superbly easy. If you want to learn how to create one, go here (some MSDN blog) and the MSDN documentation (clearly written). I was fed up of dictionary.com bringing all those popups and the stupid definitions of Google's dictionary. So I decided to scratch my own itch. I randomly stumbled on the site called Wordnik and it provides with all examples plus definitions plus lots more for words and its popup-free (as far as I know). So I decided to write and accelerator. Here is the source code (Yes, this is it): <?xml version="1.0" encoding="utf-8"?> <os:openServiceDescription xmlns:os="http://www.microsoft.com/schemas/openservicedescription/1.0"> <os:homepageUrl>http://www.wordnik.com</os:homepageUrl> <os:display> <os:name>View on Wordnik</os:name> <os:description>Looking up words on an awesome word site called Wordnik </os:description> <os:icon>http://www.wordnik.com/favicon.ico</os:icon> </os:display> <os:activity category="Define"> <os:activityAction context="selection"> <os:execute method="get" action="http://www.wordnik.com/words/{selection}" ></os:execute> </os:activityAction> </os:activity> </os:openServiceDescription> That’s it. To get it, go here. Enjoy!

    Read the article

  • What I saw at TechEd North America 2014

    - by Brian Schroer
    Originally posted on: http://geekswithblogs.net/brians/archive/2014/05/19/teched-north-america-2014.aspxI was thrilled to be able to attend TechEd North America 2014 in Houston last week. I got to go to Orlando in 2008, and since then I’ve had to settle for watching the sessions online (which ain’t bad – They’re all available on Channel 9 for streaming or downloading. Here are links to the Developer Track sessions and to the sessions from all tracks.) The sessions I attended (with my favorites bolded) were: Shiny new stuff The Microsoft Application Platform for Developers: Create Applications That Span Devices and Services INTRODUCING: The Future of .NET on the Server DEEP DIVE: The Future of .NET on the Server ASP.NET: Building Web Application Using ASP.NET and Visual Studio The Next Generation of .NET for Building Applications The Future of Visual Basic and C# Stuff you can use now Building Rich Apps with AngularJS on ASP.NET Get the Most Out of Your Code Maps SignalR: Building Real-Time Applications with ASP.NET SignalR Performance Optimize Your ASP.NET Web App Modern Web and Visual Studio Visual Studio Power User: Tips and Tricks Debugging Tips and Tricks in Visual Studio 2013 In a world where the whole company uses TFS… Using Functional, Exploratory and Acceptance Testing to Release with Confidence A Practical View of Release Management for Visual Studio 2013 From Vanity to Value, Metrics That Matter: Improving Lean and Agile, Kanban, and Scrum Ain’t Nobody Got Time for That As usual, there were some time slots with nothing of interest and others with 5 things I wanted to see at the same time. Here are the sessions I’m still planning to watch… Getting Started with TypeScript Building a Large Scale JavaScript Application in TypeScript Modern Application Lifecycle Management Why a Hacker Can Own Your Web Servers in a Day! Async Best Practices for C# and Visual Basic Building Multi-Device Apps with the New Visual Studio Tooling for Apache Cordova Applying S.O.L.I.D. Principles in .NET/C# Native Mobile Application Development for iOS, Android, and Windows in C# and Visual Studio Using Xamarin Latest Innovations in Developing ASP.NET MVC Web Applications Zero to Hero: Untested to Tested with Microsoft Fakes Using Visual Studio Cool and Elegant ASP.NET Web Forms with HTML 5 for the Modern Web The Present and Future of .NET in a World of Devices and Services

    Read the article

  • Accessing the JSESSIONID from JSF

    - by Frank Nimphius
    The following code attempts to access and print the user session ID from ADF Faces, using the session cookie that is automatically set by the server and the Http Session object itself. FacesContext fctx = FacesContext.getCurrentInstance(); ExternalContext ectx = fctx.getExternalContext(); HttpSession session = (HttpSession) ectx.getSession(false); String sessionId = session.getId(); System.out.println("Session Id = "+ sessionId); Cookie[] cookies = ((HttpServletRequest)ectx.getRequest()).getCookies(); //reset session string sessionId = null; if (cookies != null) { for (Cookie brezel : cookies) {     if (brezel.getName().equalsIgnoreCase("JSESSIONID")) {        sessionId = brezel.getValue();        break;      }   } } System.out.println("JSESSIONID cookie = "+sessionId); Though apparently both approaches to the same thing, they are different in the value they return and the condition under which they work. The getId method, for example returns a session value as shown below grLFTNzJhhnQTqVwxHMGl0WDZPGhZFl2m0JS5SyYVmZqvrfghFxy!-1834097692!1322120041091 Reading the cookie, returns a value like this grLFTNzJhhnQTqVwxHMGl0WDZPGhZFl2m0JS5SyYVmZqvrfghFxy!-1834097692 Though both seem to be identical, the difference is within "!1322120041091" added to the id when reading it directly from the Http Session object. Dependent on the use case the session Id is looked up for, the difference may not be important. Another difference however, is of importance. The cookie reading only works if the session Id is added as a cookie to the request, which is configurable for applications in the weblogic-application.xml file. If cookies are disabled, then the server adds the session ID to the request URL (actually it appends it to the end of the URI, so right after the view Id reference). In this case however no cookie is set so that the lookup returns empty. In both cases however, the getId variant works.

    Read the article

  • No GUI boot; startx error, I suspect no filesystem corruption.

    - by Dharmaj Soni
    Till yesterday, my Ubuntu 9.10 was working fine. I had watched a movie using vlc. I had also charged my ipod using the laptop. Today, when I started it, I automatically booted into command line. There seems to be no filesystem corruption etc as I can view/open (text) files. Before the CLI appeared, the screen blinked with a cursor, then the white Ubuntu logo flashed, and then I got the CLI login prompt. After logging in, if I try startx, to start gnome, I get the following error after a few seconds: giving up xinit: No such file or directory (errno 2): unable to connect to X server xinit: No such process (errno 3): Server error* The same error comes up, even if I use sudo, or if I change my directory to '/' before using startx, and also when, from the grub, using the recovery mode option to load into CLI, and then trying startx. On trying command 'xinit', I get "Server error" Also, on trying GDM, I get 2 errors. I cannot connect to the internet in this state. Thanks for any help. I am using Dell Inspiron 1440, no special graphics card.

    Read the article

  • Wrapping text in an opened file in vim

    - by TK
    I want to soft wrap text in Vim to 90 columns per line. I want soft wrap so that it doesn't affect actual text by adding line break characters. Here's is what I tried: // Opened a file with lots of text and ran the following: set wrap set tw=90 set linebreak Running the commands doesn't change anything about the view at all. It soft wraps at the end of the window. I have used "Soft Wrap" in TextMate by Command-Option-W to get the same effect, and want to know how to get it work on Vim.

    Read the article

  • Speed up loading of test results from builds in Visual Studio

    - by Jakob Ehn
    I still see people complaining about the long time it takes to load test results from a TFS build in Visual Studio. And they make a valid point, it does take a very long time to load the test results, even for a small number of tests. The reason for this is that the test results is not just the result of the test run but also all the binaries that were part of the test run. This often also means that the debug symbols (*.pdb) will be downloaded to your local machine. This reason for this behaviour is that it letsyou re-run the tests locally. However, most of the times this is not what the developer will do, they just want to know which tests failed and why. They can then fix the tests and rerun them locally. It turns out there is a way to load only the test results, which is much faster. The only tricky bit is to find the location of the .trx file that is generated during the build. Particularly in TFS 2010 where you often have multiple build agents, which of corse results in different paths to the trx file. Note: To use this you must have read permission to the build folder on the build agent where the build was executed. Open the build result for the build Click View Log Locate the part where MSTest is invoked. When using test containers, it looks like this:   Note: You can actually search in the log window, press Ctrl+F and you will get a little search box at the bottom. Nice! On the MSTest command line call, locate the /resultsfileroot parameter, which points to the folder where the test results are stored Note that this path is local for the build server, so you need to replace the drive letter with the server name: D:\Builds\Project\TestResults to \Project\TestResults">\\<BuildServer>\Project\TestResults Double-click on the .trx file and you will notice that it loads much faster compared to opening it from the build log window

    Read the article

  • 2D/Isometric map algorithm

    - by Icarus Cocksson
    First of all, I don't have much experience on game development but I do have experience on development. I do know how to make a map, but I don't know if my solution is a normal or a hacky solution. I don't want to waste my time coding things, and realise they're utterly crap and lose my motivation. Let's imagine the following map. (2D - top view - A square) X: 0 to 500 Y: 0 to 500 My character currently stands at X:250,Y:400, somewhere near center of 100px above bottom and I can control him with my keyboard buttons. LEFT button does X--, UP button does Y-- etc. This one is kid's play. I'm asking this because I know there are some engines that automate this task. For example, games like Diablo 3 uses an engine. You can pretty much drag drop a rock to map, and it is automatically being placed here - making player unable to pass through/detect the collision. But what the engine exactly does in the background? Generates a map like mine, places a rock at the center, and checks it like: unmovableObjects = array('50,50'); //we placed a rock at 50,50 location if(Map.hasUnmovableObject(CurrentPlayerX, CurrentPlayerY)) { //unable to move } else { //able to move } My question is: Is this how 2D/Isometric maps are being generated or there is a different and more complex logic behind them?

    Read the article

  • How do you customize Excel 2010 keyboard shortcuts?

    - by Sam
    How do you customize Excel 2010 keyboard shortcuts? This article from microsoft.com provides instructions for "Microsoft Office 2010" but seems only apply to Word, not Excel. http://www.microsoft.com/athome/organization/compshortcuts.aspx In Microsoft Office 2010: Click the File tab to open Backstage view, and then click Options. Click Customize Ribbon and then, next to the Keyboard Shortcuts heading, click Customize. You can enter the new key combination here. Here's the dialog it points to shown in Word: But here's the same dialog shown in Excel: Notice it looks almost exactly the same but no "Keyboard Shortcuts: Customize.." button. So how do you customize the keyboard shortcuts in Excel?

    Read the article

  • Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

    - by gil b.
    Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

    Read the article

  • What are these errors when I try to "make" the driver of my wireless adapter?

    - by Tom Brito
    I got got a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme says to use the make command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g

    Read the article

  • Transfer page from internal to external

    - by Theo Gulland
    Afternoon all! Currently I have a website with a list of audio products (essentially a search engine for audio deals). http://www.soundplaza.co.uk Once you go to the details page, you can then press the 'view deal' button to go to providers site e.g. = http://www.soundplaza.co.uk/all-deals/113/bookshelf-speakers/acoustic-energy-1 This jump between two sites is a bit harsh and I would like to show a transition page, to simply ease them into another site and not scare them off. Within this tradition page I will have a simple loading gif and some graphics showing that your transferring. QUESTION: What is the best way to send the details (link, product name etc) to this transfer page, to then wait 5 seconds, to then move on to the desired link... this can in NO WAY damage my SEO, if anything rel="nofollow" would be great if possible. Currently I have seen that you can submit form to the transition page, then you can use php sleep and then php header to transfer... however I am not sure if php header will transfer SEO value tot he provider? Any opinions would be great! Thanks

    Read the article

  • Virtual Lab part 2&ndash;Templates, Patterns, Baselines

    - by Geoff N. Hiten
    Once you have a good virtualization platform chosen, whether it is a desktop, server or laptop environment, the temptation is to build “X”.  “X” may be a SharePoint lab, a Virtual Cluster, an AD test environment or some other cool project that you really need RIGHT NOW.  That would be doing it wrong. My grandfather taught woodworking and cabinetmaking for twenty-seven years at a trade school in Alabama.  He was the first instructor hired at that school and the only teacher for the first two years.  His students built tables, chairs, and workbenches so the school could start its HVAC courses.   Visiting as a child, I also noticed many extra “helper” stands, benches, holders, and gadgets all built from wood.  What does that have to do with a virtual lab, you ask?  Well, that is the same approach you should take.  Build stuff that you will use.  Not for solving a particular problem, but to let the Virtual Lab be part of your normal troubleshooting toolkit. Start with basic copies of various Operating Systems.  Load and patch server and desktop OS environments.  This also helps build your collection of ISO files, another essential element of a virtual Lab.  Once you have these “baseline” images, you can use your Virtualization software’s snapshot capability to freeze the image.  Clone the snapshot and you have a brand new fully patched machine in mere moments.  You may have to sysprep some of the Microsoft OS environments if you are going to create a domain environment or experiment with clustering.  That is still much faster than loading and patching from scratch. So once you have a stock of raw materials (baseline images in this case) where should you start.  Again, my grandfather’s workshop gives us the answer.  In the shop it was workbenches and tables to hold large workpieces that made the equipment more useful.  In a Windows environment the same role falls to the fundamental network services:  DHCP, DNS, Active Directory, Routing, File Services, and Storage services.  Plan your internal network setup.  Build out an AD controller with all the features listed.  Make the actual domain an isolated domain so it will not care about where you take it.  Add the Microsoft iSCSI target.  Once you have this single system, you can leverage it for almost any network environment beyond a simple stand-alone system. Having these templates and fundamental infrastructure elements ready to run means I can build a quick lab in minutes instead of hours.  My solutions are well-tested, my processes fully documented with screenshots, and my plans validated well before I have to make any changes to client systems.  the work I put in is easily returned in increased value and client satisfaction.

    Read the article

  • Splitting big request in multiple small ajax requests

    - by Ionut
    I am unsure regarding the scalability of the following model. I have no experience at all with large systems, big number of requests and so on but I'm trying to build some features considering scalability first. In my scenario there is a user page which contains data for: User's details (name, location, workplace ...) User's activity (blog posts, comments...) User statistics (rating, number of friends...) In order to show all this on the same page, for a request there will be at least 3 different database queries on the back-end. In some cases, I imagine that those queries will be running quite a wile, therefore the user experience may suffer while waiting between requests. This is why I decided to run only step 1 (User's details) as a normal request. After the response is received, two ajax requests are sent for steps 2 and 3. When those responses are received, I only place the data in the destined wrappers. For me at least this makes more sense. However there are 3 requests instead of one for every user page view. Will this affect the system on the long term? I'm assuming that this kind of approach requires more resources but is this trade of UX for resources a good dial or should I stick to one plain big request?

    Read the article

  • App Pool doesn't respect memory limits

    - by lucuma
    I am dealing with a legacy .NET app that has a memory leak. In order to try and mitigate a run away memory situation, I've set the app pool memory limits from anywhere between 500KB to 500000KB (500MB) however the app pool doesn't seem to respect the settings as I can login and view the physical memory for it (5GB and above no matter what values). This app is killing the server and I can't seem to determine how to adjust the app pool. What settings do you recommend in order to ensure this app pool doesn't exceed around 500mb of memory. Here is an example, the app pool is using 3.5GB of

    Read the article

  • Skanska Builds Global Workforce Insight with Cloud-Based HCM System

    - by HCM-Oracle
    By David Baum - Originally posted on Profit Peter Bjork grew up building things. He started his work life learning all sorts of trades at his father’s construction company in the northern part of Sweden. So in college, it was natural for him to pursue a bachelor’s degree in construction engineering—but he broke new ground when he added a master’s degree in finance to his curriculum vitae. Written on a traditional résumé, Bjork’s current title (vice president of information systems strategies) doesn’t reveal the diversity of his experience—that he’s adept with hammer and nails as well as rows and columns. But a big part of his current job is to work with his counterparts in human resources (HR) designing, building, and deploying the systems needed to get a complete view of the skills and potential of Skanska’s 22,000-strong white-collar workforce. And Bjork believes that complete view is essential to Skanska’s success. “Our business is really all about people,” says Bjork, who has worked with Skanska for 16 years. “You can have equipment and financial resources, but to truly succeed in a business like ours you need to have the right people in the right places. That’s what this system is helping us accomplish.” In a global HR environment that suffers from a paradox of high unemployment and a scarcity of skilled labor, managers need to have a complete understanding of workforce capabilities to develop management skills, recruit for open positions, ensure that staff is getting the training they need, and reduce attrition. Skanska’s human capital management (HCM) systems, based on Oracle Talent Management Cloud, play a critical role delivering that understanding. “Skanska’s philosophy of having great people, encouraging their development, and giving them the chance to move across business units has nurtured a culture of collaboration, but managing a diverse workforce spread across the globe is a monumental challenge,” says Annika Lindholm, global human resources system owner in the HR department at Skanska’s headquarters just outside of Stockholm, Sweden. “We depend heavily on Oracle’s cloud technology to support our HCM function.” Construction, Workers For Skanska’s more than 60,000 employees and contractors, managing huge construction projects is an everyday job. Beyond erecting signature buildings, management’s goal is to build a corporate culture where valuable talent can be sought out and developed, bringing in the right mix of people to support and grow the business. “Of all the companies in our space, Skanska is probably one of the strongest ones, with a laser focus on people and people development,” notes Tom Crane, chief HR and communications officer for Skanska in the United States. “Our business looks like equipment and material, but all we really have at the end of the day are people and their intellectual capital. Without them, second only to clients, of course, you really can’t achieve great things in the high-profile environment in which we work.” During the 1990s, Skanska entered an expansive growth phase. A string of successful acquisitions paved the way for the company’s transformation into a global enterprise. “Today the company’s focus is on profitable growth,” continues Crane. “But you can’t really achieve growth unless you are doing a very good job of developing your people and having the right people in the right places and driving a culture of growth.” In the United States alone, Skanska has more than 8,000 employees in four distinct business units: Skanska USA Building, also known as the Construction Manager, builds everything at ground level and above—hospitals, educational facilities, stadiums, airport terminals, and other massive projects. Skanska USA Civil does everything at ground level and below, such as light rail, water treatment facilities, power plants or power industry facilities, highways, and bridges. Skanska Infrastructure Development develops public-private partnerships—projects in which Skanska adds equity and also arranges for outside financing. Skanska Commercial Development acts like a commercial real estate developer, acquiring land and building offices on spec or build-to-suit for its clients. Skanska's international portfolio includes construction of the new Meadowlands Stadium. Getting the various units to operate collaboratatively helps Skanska deliver high value to clients and shareholders. “When we have this collaboration among units, it allows us to enrich each of the business units and, at the same time, develop our future leaders to be more facile in operating across business units—more accepting of a ‘one Skanska’ approach,” explains Crane. Workforce Worldwide But HR needs processes and tools to support managers who face such business dynamics. Oracle Talent Management Cloud is helping Skanska implement world-class recruiting strategies and generate the insights needed to drive quality hiring practices, internal mobility, and a proactive approach to building talent pipelines. With their new cloud system in place, Skanska HR leaders can manage everything from recruiting, compensation, and goal and performance management to employee learning and talent review—all as part of a single, cohesive software-as-a-service (SaaS) environment. Skanska has successfully implemented two modules from Oracle Talent Management Cloud—the recruiting and performance management modules—and is in the process of implementing the learn module. Internally, they call the systems Skanska Recruit, Skanska Talent, and Skanska Learn. The timing is apropos. With high rates of unemployment in recent years, there have been many job candidates on the market. However, talent scarcity continues to frustrate recruiters. Oracle Taleo Recruiting Cloud Service, one of the applications in the Oracle Talent Management cloud portfolio, enables Skanska managers to create more-intelligent recruiting strategies, pulling high-performer profile statistics to create new candidate profiles and using multitiered screening and assessments to ensure that only the best-suited candidate applications make it to the recruiter’s desk. Tools such as applicant tracking, interview management, and requisition management help recruiters and hiring managers streamline the hiring process. Oracle’s cloud-based software system automates and streamlines many other HR processes for Skanska’s multinational organization and delivers insight into the success of recruiting and talent-management efforts. “The Oracle system is definitely helping us to construct global HR processes,” adds Bjork. “It is really important that we have a business model that is decentralized, so we can effectively serve our local markets, and interact with our global ERP [enterprise resource planning] systems as well. We would not be able to do this without a really good, well-integrated HCM system that could support these efforts.” A key piece of this effort is something Skanska has developed internally called the Skanska Leadership Profile. Core competencies, on which all employees are measured, are used in performance reviews to determine weak areas but also to discover talent, such as those who will be promoted or need succession plans. This global profiling system brings consistency to the way HR professionals evaluate and review talent across the company, with a consistent set of ratings and a consistent definition of competencies. All salaried employees in Skanska are tied to a talent management process that gives opportunity for midyear and year-end reviews. Using the performance management module, managers can align individual goals with corporate goals; provide clear visibility into how each employee contributes to the success of the organization; and drive a strategic, end-to-end talent management strategy with a single, integrated system for all talent-related activities. This is critical to a company that is highly focused on ensuring that every employee has a development plan linked to his or her succession potential. “Our approach all along has been to deploy software applications that are seamless to end users,” says Crane. “The beauty of a cloud-based system is that much of the functionality takes place behind the scenes so we can focus on making sure users can access the data when they need it. This model greatly improves their efficiency.” The employee profile not only sets a competency baseline for new employees but is also integrated with Skanska’s other back-office Oracle systems to ensure consistency in the way information is used to support other business functions. “Since we have about a dozen different HR systems that are providing us with information, we built a master database that collects all the information,” explains Lindholm. “That data is sent not only to Oracle Talent Management Cloud, but also to other systems that are dependent on this information.” Collaboration to Scale Skanska is poised to launch a new Oracle module to link employee learning plans to the review process and recruitment assessments. According to Crane, connecting these processes allows Skanska managers to see employees’ progress and produce an updated learning program. For example, as employees take classes, supervisors can consult the Oracle Talent Management Cloud portal to monitor progress and align it to each individual’s training and development plan. “That’s a pretty compelling solution for an organization that wants to manage its talent on a real-time basis and see how the training is working,” Crane says. Rolling out Oracle Talent Management Cloud was a joint effort among HR, IT, and a global group that oversaw the worldwide implementation. Skanska deployed the solution quickly across all markets at once. In the United States, for example, more than 35 offices quickly got up to speed on the new system via webinars for employees and face-to-face training for the HR group. “With any migration, there are moments when you hold your breath, but in this case, we had very few problems getting the system up and running,” says Crane. Lindholm adds, “There has been very little resistance to the system as users recognize its potential. Customizations are easy, and a lasting partnership has developed between Skanska and Oracle when help is needed. They listen to us.” Bjork elaborates on the implementation process from an IT perspective. “Deploying a SaaS system removes a lot of the complexity,” he says. “You can downsize the IT part and focus on the business part, which increases the probability of a successful implementation. If you want to scale the system, you make a quick phone call. That’s all it took recently when we added 4,000 users. We didn’t have to think about resizing the servers or hiring more IT people. Oracle does that for us, and they have provided very good support.” As a result, Skanska has been able to implement a single, cost-effective talent management solution across the organization to support its strategy to recruit and develop a world-class staff. Stakeholders are confident that they are providing the most efficient recruitment system possible for competent personnel at all levels within the company—from skilled workers at construction sites to top management at headquarters. And Skanska can retain skilled employees and ensure that they receive the development opportunities they need to grow and advance.

    Read the article

  • Network printer - Print direct or via shared printer on Server?

    - by NickC
    It has occurred to me that a workstation can connect to a printer in two ways: 1). Printing directly to the IP of the printer with the print driver installed locally. 2). Printing to a \Server\Printer1 share with the print queue residing on the server. Question is which way is preferred? I would assume that printing directly to a network printer rather than going through the server would be the most efficient from the point of view of network traffic. On the other hand I guess a server printer share would be easier to manage with the correct driver automatically being downloaded to the workstations. Also what about using GPP (Server2012) to install this printer on the workstations, does that require any specific way?

    Read the article

  • Is there a process-oriented IDE ?

    - by Raveline
    My problem is simple : when I'm programming in an OO paradigm, I'm often having part of a main business process divided in many classes. Which means, if I want to examine the whole functional chain that leads to the output, for debugging or for optimization research, it can be a bit painful. So I was wondering : is there an IDE that let you put a "process tag" on functions coming from different objects, and give you a view of all those functions having the same tag ? edit : To give an example (that I'm making up completely, sorry if it doesn't sound very realistic). Let's say we have the following business process for a HR application : receive a holiday-request by an employee, check the validity of the request, then give an alert to his boss ("one of those lazy programmer wants another day off"); at the same time, let's say the boss will want to have a table of all employee's timetable during the time the employee wants his vacations; then handle the answer of the boss, send a nice little mail to the employee ("No way, lazy bones"). Even if we get rid of everything not purely business-related (mail sending process, db handling to get the useful info, GUI functionalities, and so on), we still have something that doesn't really fit in "one class". I'd like to have an IDE that would give me the opportunity to embrace quickly, at the very least : The function handling the validation of the request by the employee; The function preparing the "timetable" for the boss; The function handling the validation of the request by the boss; I wouldn't put all those functions in the same class (but perhaps that's my mistake ?). This is where my dreamed IDE could be helpful.

    Read the article

< Previous Page | 776 777 778 779 780 781 782 783 784 785 786 787  | Next Page >