Search Results

Search found 7601 results on 305 pages for 'auto ptr'.

Page 79/305 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Ubuntu Server and setting up two nic cards

  - by kmalik

  I have ubuntu server on a computer with a wireless and hardwired nic card. The wireless needs to get the internet and pass it to the ubuntu server as well as pass it along to the hardwired nic card to more computers. I am having issues getting the basic set up as I believe the route table is grabbing from the wrong nic card. The router is 192.168.1.0 and the server is set to 192.168.1.11 on the wireless card through DHCP ETH0 (wired nic card) is set up to be 10.10.10.0 and the server is 10.10.10.1) I am not a linux or networking guru but basically I am trying to have internet come from a guest network 192.168.1.0 i believe to give internet to the ubuntu server then the ubuntu server will also A) have the wired nic serve DHCP addresses to other computers via a switch or router (that acts as a switch) via 10.10.10.0 addresses. And I would love if it also passed along internet capabilities as well if possible. Bu really at this point my hope is to at least get the internet working on the server and the DHCP to pass correctly. At the moment the specific issue I am having is getting ubuntu server to connect to the internet and have both nic cards up and running correctly. Any help would be appreciated! The route table is as follows: Destination Gateway GM Flags Metric Iface 0.0.0.0 10.10.10.1 0.0.0.0 UG 100 eth0 10.10.10.0 0.0.0.0 255.255.255.0 U 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 eth0 1992.168.1.0 0.0.0.0 255.255.255.255.0 U 0 eth1 My interfaces is set up as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.1 netmask 255.255.255.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.1 domain-name-servers 192.168.1.0 auto eth1 iface eth1 inet dhcp netmask 255.255.255.0 gateway 192.168.1.0 wpa-driver wext wpa-ssid "ssid_name" wpa-ap-scan 1 wpa-proto wpa wpa-pairwise ccmp wpa-group ccmp wpa-key-mgmt wpa-psk wpa-psk "HASH" My DHCPD.conf (as there is a domain name server on here is as follows): ddns-update-style none default-lease-time 600 max-lease-time 7200 authoritative option domain-name "Kamron's Network" option subnet-mask 255.255.255.0 option broadcast-address 10.10.10.255 option routers 192.168.1.0 option domain-name-server 192.168.1.0 98.223.128.213 ooption subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.99 } log-facility local7

  Read the article

• Ubuntu 14.04LTS - runtime video card configuration through Radeon driver

  - by RJVB

  How does one configure Radeon video cards when using the open source Radeon driver - power profile, vsync, etc? Why I try the widely documented solution (against overheating) that worked for me under LMDE (confirmed with kernels up to 3.12.6), I get the following error: $ sudo cat /sys/class/drm/card0/device/power_profile default $ sudo sh -c "echo mid > /sys/class/drm/card0/device/power_profile" sh: echo: I/O error Exit 1 And when I try suggestions from Arch's ATI wiki my modifications are simply ignored: $ sudo cat /sys/class/drm/card0/device/power_dpm_force_performance_level auto $ sudo sh -c "echo high> /sys/class/drm/card0/device/power_dpm_force_performance_level" $ sudo cat /sys/class/drm/card0/device/power_dpm_force_performance_level auto Is this something Ubuntu specific, or something introduced with the 3.13 version of the Radeon driver? I'm encountering this on 2 laptops, one with a Radeon HD6290 (integrated GPU), the other with a discrete RV710 card. The RV710 needs a specific power setting to prevent overheating under LMDE, fortunately it doesn't seem to overheat with the Ubuntu default setting.

  Read the article

• How do I get rid of the drive mount confirmation question for sshFS on boot?

  - by Dave M G

  With help from this site, I was able to set up an SSHFS connection between two computers on my LAN so that one auto mounts on the other at boot time. Everything works, but there is this annoying confirmation that comes up whenever I boot: An error occurred while mounting /home/dave/Mythbuntu. Press S to skip mounting or M or Manual recovery If I press S, then booting continues, and my drive is mounted as hoped, so it seems like even though I "skipped" it, maybe it tried again and succeeded later in the boot process. I followed the instructions here to set up "if up / if down" scripts, and here is my current /etc/fstab: sshfs#[email protected]:/home/mythbuntu /home/dave/Mythbuntu fuse auto,users,exec,uid=1000,gid=1000,allow_other,reconnect,transform_symlinks,BatchMode=yes 0 0 Although the mounting is working, this step of having to press S every time I boot is obviously kind of a hassle. How do I configure my computer so I don't have to do that, and so that my other computer will still automount?

  Read the article

• Need a graphical renaming tool which can rename files recursively

  - by user37991

  ATM I am forced to use freeware in Windows to rename SOME Linux data files. Linux also creates files like "Filename.ext" as being different to "filename.ext", and !@#$hg".ext ... which cannot be recognized by Windows. "pyrenamer" ... mentioned in another answer cannot auto-rename more than the one immediate folder. I use Ubuntu, not ARCH linux, because I am not CLI. Despite some answers here (designed by and for CLI programmers), how can Ubuntu GUI (not CLI) do file renaming? BTY: in ONE folder only, THUNAR is far better than silly pyrenamer. But Thunar cannot auto-rename recursively.

  Read the article

• No client internet access when setting up these iptables rules

  - by Siriss

  I have read many other posts but cannot figure this out. eth0 is my external connected to a Comcast modem. The server has internet access with no issues. eth1 is internal and running DHCP for the clients. I have DHCP working just fine, all my clients can get an IP and ping the server but they cannot access the internet. I am using ISC-DHCP-SERVER and have set /etc/default/isc-dhcp-server to INTERFACE="eht1" Here is my dhcpd.conf file located in /etc/dhcp/dhcpd.conf ddns-update-style interim; ignore client-updates; subnet 10.0.10.0 netmask 255.255.255.0 { range 10.0.10.10 10.0.10.200; option routers 10.0.10.2; option subnet-mask 255.255.255.0; option domain-name-servers 208.67.222.222, 208.67.220.220; #OpenDNS # option domain-name "example.com"; default-lease-time 21600; max-lease-time 43200; authoritative; } I have made the *net.ipv4.ip_forward=1* change in /etc/sysctl.conf here is my interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp iface eth1 inet static address 10.0.10.2 netmask 255.255.255.0 network 10.0.10.0 auto eth1 And finally- here is my iptables.conf file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.10.0/24 -o eth0 -j MASQUERADE #-A PREROUTING -i eth0 -p tcp --dport 59668 -j DNAT --to-destination 10.0.10.2:59668 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth1 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT -A FORWARD -s 10.0.10.0/24 -o eth0 -j ACCEPT -A FORWARD -d 10.0.10.0/24 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth1 -j ACCEPT #-A FORWARD -i eth0 -m state --state NEW -m tcp -p tcp -d 10.0.10.2 --dport 59668 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT I am completely stuck. I cannot figure out why the clients cannot access the internet. Am I missing a service? Is a service not running? Any help would be greatly appreciated. I tried to be as thorough as possible but please let me know if I have missed something. Thank you!

  Read the article

• Android: Programatically Add UI Elements to a View

  - by Shivan Raptor

  My view is written as follow: package com.mycompany; import android.view.View; import java.util.concurrent.TimeUnit; import java.util.ArrayList; import android.content.Context; import android.graphics.Canvas; import android.graphics.Color; import android.util.AttributeSet; import android.graphics.Paint; import android.graphics.Point; import android.hardware.Sensor; import android.hardware.SensorEvent; import android.hardware.SensorEventListener; import android.hardware.SensorManager; import android.widget.*; public class GameEngineView extends View implements SensorEventListener { GameLoop gameloop; String txt_acc; float accY; ArrayList<Point> bugPath; private SensorManager sensorManager; private class GameLoop extends Thread { private volatile boolean running = true; public void run() { while (running) { try { TimeUnit.MILLISECONDS.sleep(1); postInvalidate(); pause(); } catch (InterruptedException ex) { running = false; } } } public void pause() { running = false; } public void start() { running = true; run(); } public void safeStop() { running = false; interrupt(); } } public void unload() { gameloop.safeStop(); } public GameEngineView(Context context, AttributeSet attrs, int defStyle) { super(context, attrs, defStyle); // TODO Auto-generated constructor stub init(context); } public GameEngineView(Context context, AttributeSet attrs) { super(context, attrs); // TODO Auto-generated constructor stub init(context); } public GameEngineView(Context context) { super(context); // TODO Auto-generated constructor stub init(context); } private void init(Context context) { txt_acc = ""; // Adding SENSOR sensorManager=(SensorManager)context.getSystemService(Context.SENSOR_SERVICE); // add listener. The listener will be HelloAndroid (this) class sensorManager.registerListener(this, sensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER), SensorManager.SENSOR_DELAY_NORMAL); // Adding UI Elements : How ? Button btn_camera = new Button(context); btn_camera.setLayoutParams(new LinearLayout.LayoutParams(LinearLayout.LayoutParams.FILL_PARENT, LinearLayout.LayoutParams.FILL_PARENT)); btn_camera.setClickable(true); btn_camera.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { System.out.println("clicked the camera."); } }); gameloop = new GameLoop(); gameloop.run(); } @Override protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { // TODO Auto-generated method stub //super.onMeasure(widthMeasureSpec, heightMeasureSpec); System.out.println("Width " + widthMeasureSpec); setMeasuredDimension(widthMeasureSpec, heightMeasureSpec); } @Override protected void onDraw(Canvas canvas) { // TODO Auto-generated method stub // super.onDraw(canvas); Paint p = new Paint(); p.setColor(Color.WHITE); p.setStyle(Paint.Style.FILL); p.setAntiAlias(true); p.setTextSize(30); canvas.drawText("|[ " + txt_acc + " ]|", 50, 500, p); gameloop.start(); } public void onAccuracyChanged(Sensor sensor,int accuracy){ } public void onSensorChanged(SensorEvent event){ if(event.sensor.getType()==Sensor.TYPE_ACCELEROMETER){ //float x=event.values[0]; accY =event.values[1]; //float z=event.values[2]; txt_acc = "" + accY; } } } I would like to add a Button to the scene, but I don't know how to. Can anybody give me some lights? UPDATE: Here is my Activity : public class MyActivity extends Activity { private GameEngineView gameEngine; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // add Game Engine gameEngine = new GameEngineView(this); setContentView(gameEngine); gameEngine.requestFocus(); } }

  Read the article

• Shouldn't storage classes be taught early in a C class or book?

  - by Adam Mendoza

  Shouldn't storage classes be taught early in a C class or book? I notice that a lot of books, even some of the better ones, covert it toward and end of the book and some books just add it as an appendix. I would teach it together with variables. This is so foundational and I think unfortunately many do not make it that far in a book. Now that auto has a different meaning (vs being optional) it may confuse people that didn't realize it has always been there. for example: C Programming: A Modern Approach 18.2 Storage Classes 401 Properties of Variables 401 The auto Storage Class 402 The static Storage Class 403 The extern Storage Class 404 The register Storage Class 405 The Storage Class of a Function 406 Summary 407

  Read the article

• How do I get rid of this drive mount confirmation question when booting the computer?

  - by Dave M G

  With help from this site, I was able to set up an SSHFS connection between two computers on my LAN so that one auto mounts on the other at boot time. Everything works, but there is this annoying confirmation that comes up whenever I boot: An error occurred while mounting /home/dave/Mythbuntu. Press S to skip mounting or M or Manual recovery If I press S, then booting continues, and my drive is mounted as hoped, so it seems like even though I "skipped" it, maybe it tried again and succeeded later in the boot process. I followed the instructions here to set up "if up / if down" scripts, and here is my current /etc/fstab: sshfs#[email protected]:/home/mythbuntu /home/dave/Mythbuntu fuse auto,users,exec,uid=1000,gid=1000,allow_other,reconnect,transform_symlinks,BatchMode=yes 0 0 Although the mounting is working, this step of having to press S every time I boot is obviously kind of a hassle. How do I configure my computer so I don't have to do that, and so that my other computer will still automount?

  Read the article

• Too much delay while sending object over UDP to server

  - by RomZes

  I'm getting 4 sec delay when sending objects over UDP. Working on small game and trying to implement multiplayer. For now just trying to synchronize movements of 2 balls on the screen. StartingPoint.java is my server(first player), that receiving serialized objects (coordinates). SecondPlayer.java is client that sending serialized objects to server. When I'm moving my first object it appears 4 seconds later on different screen. StartingPoint.java @Override public void run() { byte[] receiveData = new byte[256]; byte[] sendData = new byte[256]; // DatagramSocket socketS; try { socket = new DatagramSocket(5000); System.out.println("Socket created on "+ port + " port"); } catch (SocketException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } while(true){ b1.update(this); b3.update(); System.out.println("Starting server..."); //// Receiving and deserializing object try { //socket.setSoTimeout(1000); DatagramPacket packet = new DatagramPacket(buf, buf.length); socket.receive(packet); byte[] data = packet.getData(); ByteArrayInputStream in = new ByteArrayInputStream(data); ObjectInputStream is = new ObjectInputStream(in); // socket.setSoTimeout(300); b1 = (Ball) is.readObject(); } catch (IOException | ClassNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); } repaint(); try { Thread.sleep(17); } catch (InterruptedException e) { e.printStackTrace(); } SecondPlayer.java @Override public void run() { while(true){ b.update(); networkSend(); repaint(); try { Thread.sleep(17); } catch (InterruptedException e) { e.printStackTrace(); } } public void networkSend(){ // Serialize to a byte array try { ByteArrayOutputStream bStream = new ByteArrayOutputStream(); ObjectOutputStream oo; oo = new ObjectOutputStream(bStream); oo.writeObject(b); oo.flush(); oo.close(); byte[] bufCar = bStream.toByteArray(); //socket = new DatagramSocket(); //socket.setSoTimeout(1000); InetAddress address = InetAddress.getByName("localhost"); DatagramPacket packet = new DatagramPacket(bufCar, bufCar.length, address, port); socket.send(packet); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); }

  Read the article

• Open Cl.I just need to convert the code to using two work items in the for loop .Currentlly it uses one

  - by user1660282

  spmv_csr_scalar_kernel(const int num_rows , const int * ptr , const int * indices , const float * data , const float * x, float * y) { int row = get_global_id(0); if(row < num_rows) { float dot = 0; int row_start = ptr[row]; int row_end = ptr[row+1]; for (int jj = row_start; jj < row_end; jj++) { dot += data[jj] * x[indices[jj]]; } y[row] += dot; } } Above is the Open Cl code for multiplying a sparse matrix in CSR format with a Column vector.It uses one global work item per for loop.Can anybody help me in using two work items in each for loop.I am new to open cl and get a lot of issues if I modify even the smallest thing.Please help me.This a part of my project.I made it this parallel but I wanna make it more parallel.Please help me if you can.plzzzz A single work item executes the for loop from row_start to row_end.I want that this row or for loop is further divided into two parts each executed by a single work item.How do I go on accomplishing that? This is what I could come up with but its returning the wrong output.plzz help __kernel void mykernel(__global int* colvector,__global int* val,__global int* result,__global int* index,__global int* rowptr,__global int* sync) { __global int vals[8]={0,0,0,0,0,0,0,0}; for(int i=0;i<4;i++) { result[i]=0; } barrier(CLK_GLOBAL_MEM_FENCE); int thread_id=get_global_id(0); int warp_id=thread_id/2; int lane=(thread_id)&1; int row=warp_id; if(row<4) { int row_start = rowptr[row]; int row_end = rowptr[row+1]; vals[thread_id]=0; for (int i = row_start+lane; i<row_end; i+=2) { vals[thread_id]+=val[i]*colvector[index[i]]; } vals[thread_id]+=vals[thread_id+1]; if(lane==0){ result[row] += vals[thread_id]; } } }

  Read the article

• 1000baseT/Full Supported and Advertised but not working!

  - by user11973

  Hello, i'm using a AT3IONT-I motherboard with integrated card. If I ethtool it to 1000 full duplex it wont work! Here is sudo ethtool eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) Link detected: yes here is sudo lshw -C network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: 03 serial: bc:ae:c5:8b:7d:33 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.021.00-NAPI duplex=full ip=192.168.0.2 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:42 ioport:e800(size=256) memory:f8fff000-f8ffffff memory:f8ff8000-f8ffbfff memory:fbff0000-fbffffff And lspci -nn: 00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1) 00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a88] (rev b1) 00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge [10de:0aad] (rev b3) 00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0aa4] (rev b1) 00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev b1) 00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a89] (rev b1) 00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor [10de:0aa3] (rev b1) 00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) 00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) 00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) 00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) 00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1) 00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) 00:0b.0 RAID bus controller [0104]: nVidia Corporation MCP79 RAID Controller [10de:0abc] (rev b1) 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac4] (rev b1) 00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) 00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1) 03:00.0 VGA compatible controller [0300]: nVidia Corporation ION VGA [10de:087d] (rev b1) 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) If i use Code: sudo ethtool -s eth0 speed 1000 duplex full autoneg off then in ethtool speed is Unknown and it doesn't work; if I set it via pre-up it wont work either... Please help!! Thanks!

  Read the article

• DTLoggedExec 1.1.2008.4 Released!

  - by Davide Mauri

  Today I've relased the latest version of my DTExec replacement tool, DTLoggedExec. The main changes are the following: Used a new strategy for version numbers. Now it will follow the following pattern Major.Minor.TargetSQLServerVersion.Revision Added support for Auto Configurations Fixed a bug that reported incorrect number of errors and warnings to Log Providers Fixed a buf that prevented correct casting of values when using /Set and /Param options Errors and Warnings are now counted more precisely. Updated database and log import scripts to categorize logs by projects and sections. E.g.: Project: MyBIProject; Sections: Staging, Datawarehouse Removed unused report stored procedures from database Updated Samples: 12 samples are now available to show ALL DTLoggedExec features From this version only SSIS 2008 will be supported http://dtloggedexec.codeplex.com/releases/view/62218  It useful to say something more on a couple of specific points: From this version only SSIS 2008 will be supportedYes, Integration Services 2005 are not supported anymore. The latest version capable of running SSIS 2005 Packages is the 1.0.0.2. Updated database and log import scripts to categorize logs by projects and sectionsWhen you import a log file, you can now assign it to a Project and to a Section of that project. In this way it's easier to gather statistical information for an entire project or a subsection of it. This also allows to store logged data of package belonging to different projects in the same database. For example:  Updated SamplesA complete set of samples that shows how to use all DTLoggedExec features are now shipped with the product. Enjoy! Added support for Auto ConfigurationsThis point will have a post on its own, since it's quite important and is by far the biggest new feature introduced in this release. To explain it in a few words, I can just say that you don't need to waste time with complex DTS configuration files or options, since a package will configure itself automatically. You just need to write a single statement as a parameter for DTLoggedExec. This feature can simplify deployment *a lot* :)   I the next days I'll write the mentioned post on Auto-Configurations and i'll update the documentation available on theDTLoggedExec website:   http://dtloggedexec.davidemauri.it/MainPage.ashx

  Read the article

• Issue with setting up multiple IP addresses on ubuntu server installation

  - by varunyellina

  I want to setup two ip addresses on my system for access through lan. This is my config on my other system. Desktop Installation My desktop installation runs with multiple IP's added through networkmanager both through lan and wifi. Server Installation On my server install I've edited /etc/network/interfaces to the following. auto eth0 auto eth0:1 # IP-1 iface eth0 inet static address 172.16.35.35 network 172.16.34.1 netmask 255.255.254.0 broadcast 172.166.35.255 dns-nameservers 172.16.100.221 8.8.8.8 # IP-2 iface eth0:1 inet static address 172.16.34.34 network 172.16.34.1 netmask 255.255.254.0 gateway 172.16.34.1 broadcast 172.16.35.255 After restarting through "/etc/init.d/networking restart" I recieve "Failed to bring up eth0:1" What am I doing wrong? Thankyou.

  Read the article

• How to modify the default position of desktop icons

  - by Hanynowsky

  Is it possible to modify the default desktop icons position so that icons move a little bit to right. If yes, how? As far as I know, there is no tweak for that in Nautilus. When I click "Organize Desktop by Name", the icons get aligned to the left of Desktop: that's fine, but they're too close to the launcher when it's in AUTO HIDE mode. So when Launcher is revealed, it comes over icons. Reproduce: Download some files from your browser or copy files/folders from a folder to the desktop, then these latter will be placed just like the screenshot. Their position is fine when the launcher is hidden, but when revealed, it hides a part of the icons. There is no problem when LAUNCHER AUTO-HIDE MODE is disabled. Thanks in advance.

  Read the article

• What's New in Visual Studio 2010 Languages

  - by Aamir Hasan

  What's New in Visual Basic 2010Describes new features in the Visual Basic language and Code Editor. The features include implicit line continuation, auto-implemented properties, collection initializers, and more.What's New in Visual C# 2010Describes new features in the C# language and Code Editor. The features include the dynamic type, named and optional arguments, enhanced Office programmability, and variance.What's New in Visual C++ 2010Describes new and revised features in Visual C++. The features include lambda expressions, the rvalue reference declarator, and the auto, decltype, and static_assert keywords.What's New in Visual F# 2010Describes the F# language, which is a language that supports functional programming for the .NET Framework.Reference:http://msdn.microsoft.com/en-us/library/bb386063%28VS.100%29.aspx

  Read the article

• C2664 when casting child class to templated parent class

  - by DC

  I have a parent class which is templated, and a child class which implements it. template< typename T1, typename T2> class ParentClass{ . . . }; class ChildClass : public ParentClass<MyT1, MyT2> { . . . }; And I want to have a pointer which I can use polymorphically: ParentClass<T1, T2>* ptr; ptr = static_cast<ParentClass<MyT1, MyT2>* >(new ChildClass() ); No matter how I cast it, I always get a C2664 which has the same expression: error C2664: cannot convert parameter 1 from 'ParentClass< T1,T2 *' to 'ParentClass< T1,T2 *' Is it not possible to cast pointer types between inherited types if the parent is templated, even if the types specified in the templates are the same?

  Read the article

• Socket programming question

  - by dfddf

  I am given the following declaration: char inbuff[500], *ptr; int n, bufferlen; Write a program segement to receive a message having 500 bits from the TCP socket sock and store this message in inbuff. My answer is: n = recv( sock, inbuff, strlen( inbuff ), 0 ); However, I am not sure why *ptr is given in the declaration. So, I would like ask, what is the purpose of the pointer in this question?? Or my program segement is wrong? Thank you for all of yours help first!

  Read the article

• How to schedule dynamic function with cron job?

  - by iBrazilian2

  I want to know how I can schedule a dynamic(auto populated data) function to auto run everyday at saved time? Let's say I have a form that once the button is clicked it sends the data to the function, which the posts the data. I simply want to automate that so that I don't have to press the button. <ul> <?php foreach($Class->retrieveData as $data) { <form method="post" action=""> <li> <input type="hidden" name="name">'.$data['name'].'<br/> <input type="hidden" name="description">'.$data['description'].'<br/> <input type="submit" name="post_data" value="Post"> </li> </form> } ?> </ul> Now, the form will pass the data to the function. if(isset($_POST['post_data'])) // if post_data button is clicked then it runs myFunction() { myFunction(); } myFunction() { $name = $_POST['name']; $description = $_POST['description']; } I tried doing the following but the problem is that Cron Job can only run the whole .php file, and I am retrieving the saved time to run from MySQL. foreach($Class->getTime() as $timeData) { $timeHour = $timeData['timeHour']; $timeMinute = $timeData['timeMinute']; $hourMin = date('H:i'); $timeData = ''.$timeHour.':'.$timeMinute.''; if($hourMin == $timeData) { run myFunction. } } $hourMin is the current hour:minute which is being matched against a saved time to auto run from Mysql. So if $hourMin == $timeData then the function will run. How can I run Cron Job to auto run myFunction() if the $hourMin equals $timeData? So... List 1 = is to be runned at 10am List 2 = is to be runned at 12pm List 3 = is to be runned at 2pm The 10am, 12pm, 2pm is the $timeHour and $timeMinute that is retrieved from MySQL but based on each list id's. EDIT @randomSeed, 1) I can schedule cron jobs. 2) $name and $description will all be arrays, so the following is what I am trying to accomplish. $name = array( 'Jon', 'Steven', 'Carter' ); $description = array( 'Jon is a great person.', 'Steven has an outgoing character.', 'Carter is a horrible person.' ); I want to parse the first arrays from both $name and $description if the scheduled time is correct. In database I have the following postDataTime table +----+---------+----------+------------+--------+ | iD | timeDay | timeHour | timeMinute | postiD | +--------------------------------------+--------+ | 1 | * | 9 | 0 | 21 | |----|---------|----------|------------|--------| | 2 | * | 10 | 30 | 22 | |----|---------|----------|------------|--------| | 3 | * | 11 | 0 | 23 | +----|---------+----------+------------+--------+ iD = auto incremented on upload. timeDay = * is everyday (cron job style) timeHour = Hour of the day to run the script timeMinute = minute of the hour to run script postiD = this is the id of the post that is located in another table (n+1 relationship) If it's difficult to understand.. if(time() == 10:30(time from MySQL postiD = 22)) { // run myFunction with the data that is retrieved for that time ex: $postiD = '22'; $name = 'Steven'; $description = 'Steven has an outgoing character.'; // the above is what will be in the $_POST from the form and will be // sent to the myFunction() } I simply want to schedule everything according to the time that is saved to MySQL as I showed at the very top(postDataTime table). (I'd show what I have tried, but I have searched for countless hours for an example of what I am trying to accomplish but I cannot find anything and what I tried doesn't work.). I thought I could use the exec() function but from what it seems that does not allow me to run functions, otherwise I would do the following.. $time = '10:30'; if($time == time()) { exec(myFunction()); }

  Read the article

• Use unnamed object to invoke method or not?

  - by Chen OT

  If I have a class with only only public method. When I use this class, is it good to use unnamed object to invoke its method? normal: TaxFileParser tax_parser(tax_file_name); auto content = tax_parser.get_content(); or unnamed object version: auto content = TaxFileParser(tax_file_name).get_content(); Because I've told that we should avoid temporary as possible. If tax_parser object is used only once, can I call it a temporary and try to eliminate it? Any suggestion will be helpful.

  Read the article

• Partitions and cdrom are not mounted, and the bars are missing in Ubuntu 12.04

  - by nuit

  Provide my spec and sorry for my poor English first. MB: Gigabyte G31M-S2L (bios ver. F9) CPU: intel E5200 2G RAM HD1: WD 160G with 2 partitions (partition 1:60G, NTFS, win xp; partition 2:100G, NTFS) HD2: WD 320G with 2 partitions (partition 3:220G, NTFS; partition 4:100G, ext4, Ubuntu) Recently, I tried to install Ubuntu 12.04 Beta 2 on my desktop PC (on partition 4). At the beginning, everything looked great including the auto-mounting of partitions 1~3 and the unity (3D). However, after I deleted and re-allocated the partitions on HD2 and re-installed Ubuntu on partition 4, the partitions 1~3 are no longer auto-mounted when I logged in the desktop (and even the inserted cdrom would not be mounted either), and the launch bar and menu bar in unity (3D) are missing. The configurations during these two installations are all the same as default. Are there any possible reasons or solutions for this issue? Thank you in advance!

  Read the article

• Nautilus uses different permissions for mounted drives

  - by farhad0011

  I've written two bash scripts to give read-only or read/write access to my NTFS partition: read-only access: sudo umount /media/Data_Drive/ sudo mount -t ntfs-3g -o ro,user,auto,nls=utf8,umask=0000,uid=1000 /dev/sda2 /media/Data_Drive read/write access: sudo umount /media/Data_Drive/ sudo mount -t ntfs-3g -o rw,user,auto,nls=utf8,umask=0000,uid=1000 /dev/sda2 /media/Data_Drive It works perfectly if I only use terminal to work with the files. It also works with Nautilus in read-only mode but not in the read/write mode. In fact, Nautilus gives me an error when I try to copy a file to Data_Drive saying "The destination is read-only". More funny, when I look at the permissions (by right-clicking on Data_Drive and then properties-permissions) I have all the required permissions to write a file in Data_Drive! I am so confused why Nautilus behaves strangely. I appreciate if anybody could solve the mystery!

  Read the article

• How to make condition inside getView of Custom BaseAdapter

  - by user1501150

  I want to make a Custom ListView with Custom BaseAdapter, where the the status=1,I want to show a CheckBox, and else I want to show a textView.. My given condition is: if (NewtheStatus == 1) { alreadyOrderText .setVisibility(TextView.GONE); } else{ checkBox.setVisibility(CheckBox.GONE); } But Some times I obtain some row that has neither checkBox nor TextView. The Code of my Custom BaseAdapter is given below . private class MyCustomAdapter extends BaseAdapter { private static final int TYPE_ITEM = 0; private static final int TYPE_ITEM_WITH_HEADER = 1; // private static final int TYPE_MAX_COUNT = TYPE_SEPARATOR + 1; private ArrayList<WatchListAllEntity> mData = new ArrayList(); private LayoutInflater mInflater; private ArrayList<WatchListAllEntity> items = new ArrayList<WatchListAllEntity>(); public MyCustomAdapter(Context context, ArrayList<WatchListAllEntity> items) { mInflater = (LayoutInflater) getSystemService(Context.LAYOUT_INFLATER_SERVICE); } public void addItem(WatchListAllEntity watchListAllEntity) { // TODO Auto-generated method stub items.add(watchListAllEntity); } public View getView(int position, View convertView, ViewGroup parent) { View v = convertView; final int position1 = position; if (v == null) { LayoutInflater vi = (LayoutInflater) getSystemService(Context.LAYOUT_INFLATER_SERVICE); v = vi.inflate(R.layout.listitempict, null); } watchListAllEntity = new WatchListAllEntity(); watchListAllEntity = items.get(position); Log.i("position: iteamsLength ", position + ", " + items.size()); if (watchListAllEntity != null) { ImageView itemImage = (ImageView) v .findViewById(R.id.imageviewproduct); if (watchListAllEntity.get_thumbnail_image_url1() != null) { Drawable image = ImageOperations(watchListAllEntity .get_thumbnail_image_url1().replace(" ", "%20"), "image.jpg"); // itemImage.setImageResource(R.drawable.icon); if (image != null) { itemImage.setImageDrawable(image); itemImage.setAdjustViewBounds(true); } else { itemImage.setImageResource(R.drawable.iconnamecard); } Log.i("status_ja , status", watchListAllEntity.get_status_ja() + " ," + watchListAllEntity.getStatus()); int NewtheStatus = Integer.parseInt(watchListAllEntity .getStatus()); CheckBox checkBox = (CheckBox) v .findViewById(R.id.checkboxproduct); TextView alreadyOrderText = (TextView) v .findViewById(R.id.alreadyordertext); if (NewtheStatus == 1) { alreadyOrderText .setVisibility(TextView.GONE); } else{ checkBox.setVisibility(CheckBox.GONE); } Log.i("Loading ProccardId: ", watchListAllEntity.get_proc_card_id() + ""); checkBox.setOnCheckedChangeListener(new OnCheckedChangeListener() { public void onCheckedChanged(CompoundButton buttonView, boolean isChecked) { WatchListAllEntity watchListAllEntity2 = items .get(position1); Log.i("Position: ", position1 + ""); // TODO Auto-generated method stub if (isChecked) { Constants.orderList.add(watchListAllEntity2 .get_proc_card_id()); Log.i("Proc Card Id Add: ", watchListAllEntity2 .get_proc_card_id() + ""); } else { Constants.orderList.remove(watchListAllEntity2 .get_proc_card_id()); Log.i("Proc Card Id Remove: ", watchListAllEntity2.get_proc_card_id() + ""); } } }); } } return v; } private Drawable ImageOperations(String url, String saveFilename) { try { InputStream is = (InputStream) this.fetch(url); Drawable d = Drawable.createFromStream(is, "src"); return d; } catch (MalformedURLException e) { return null; } catch (IOException e) { return null; } } public Object fetch(String address) throws MalformedURLException, IOException { URL url = new URL(address); Object content = url.getContent(); return content; } public int getCount() { // TODO Auto-generated method stub int sizef=items.size(); Log.i("Size", sizef+""); return items.size(); } public Object getItem(int position) { // TODO Auto-generated method stub return items.get(position); } public long getItemId(int position) { // TODO Auto-generated method stub return position; } }

  Read the article

• wlan0 (WPA2) doesn't work when configured manually

  - by 71GA

  I have been trying to reconfigure my eth0 and wlan0 interfaces by editing /etc/network/interfaces file as folows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.11 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 dns-nameservers 193.2.1.66 auto wlan0 iface wlan0 inet static address 192.168.1.10 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 dns-nameservers 193.2.1.66 wpa-driver wext wpa-ssid lausi wpa-ap-scan 2 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk 8952a447c860d13847ba1cabd15314ba9caf2fb207f19598f90c43fcd43c0d97 But my wireless doesnt work when i use command /etc/init.d/networking restart and when i do this i get an error: * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... RTNETLINK answers: File exists Failed to bring up eth0. ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument RTNETLINK answers: File exists Failed to bring up wlan0. Although it clearly states that my eth0 interface couldn't be brought to life it is working! But i cant say this for the wlan0 interface which doesn't even work if i unplug internet cable and again use command /etc/init.d/networking restart. This seems weird to me... When i use ìfconfig -a command i get an output which confirms that wlan0 isnt working and eth0 is. ziga@ziga-cq56:/etc/network$ ifconfig -a eth0 Link encap:Ethernet HWaddr 60:eb:69:6f:5f:69 inet addr:192.168.1.11 Bcast:192.168.1.13 Mask:255.255.255.0 inet6 addr: fe80::62eb:69ff:fe6f:5f69/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6764 errors:0 dropped:0 overruns:0 frame:0 TX packets:6641 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5932190 (5.9 MB) TX bytes:1331846 (1.3 MB) Interrupt:42 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1759 errors:0 dropped:0 overruns:0 frame:0 TX packets:1759 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:107772 (107.7 KB) TX bytes:107772 (107.7 KB) wlan0 Link encap:Ethernet HWaddr 70:f3:95:e7:57:cc inet addr:192.168.1.10 Bcast:192.168.1.12 Mask:255.255.255.0 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) How can i make my wlan0 interface work? It had been working previously with network manager and wicd...

  Read the article

• Visual Studio 2010 JavaScript Intellisense Behavior

  After I installed Visual Studio 2010 I was having a difficult time editing .js files in Visual Studio. I habitually type the "(" character as soon as the function I want to call is highlighted in the Intellisense window, but in 2010 this behavior was no longer auto-completing the function name. At first I thought this behavior was due to the new "suggestion mode" in Intellisense, but no amount of toggling with CTRL+ALT+SPACE would bring back the auto-complete behavior. It turns out the two...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Wireless connection by using command screen

  - by Amadeus

  I installed Ubuntu 12.04 armhf to my beagleboard-xm and now trying to connect to a wireless network. First, I checked if I can search for available networks: ubuntu@arm:~$ iwlist scan lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: EA:7D:EF:60:C9:0B Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-23 dBm Encryption key:on ESSID:"ghostrider" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Ad-Hoc Extra:tsf=000000005a1ab50e Extra: Last beacon: 6242ms ago IE: Unknown: 000A67686F73747269646572 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 06020000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: 2D1A2C181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16010800000000FF000000000000000000000000000000 IE: Unknown: DD09001018020000000000 Then I edited /etc/network/interfaces file to the following: root@arm:/etc/wpa_supplicant# cat /etc/network/interfaces auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # WiFi Example auto wlan0 iface wlan0 inet dhcp wpa-ssid "ghostrider" wpa-psk "b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf" But I cannot still connect to the wireless network: root@arm:/etc/wpa_supplicant# iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Asociated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on eth0 no wireless extensions. root@arm:/etc/network# ifup wlan0 Failed to bring up wlan0. What is wrong? Should I change any other files also? But I think it was enough. By the way if you are curious about where that wpa-psk came from: zero@ghostrider:~$ wpa_passphrase ghostrider 34bddf67c2 network={ ssid="ghostrider" #psk="34bddf67c2" psk=b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf } I will appreciate any effort to help. Regards, Amadeus ps: Also I tried to connect manually: root@arm:/etc/network# iwconfig wlan0 essid ghostrider key s:34bddf67c2 But this did not solve my problem also.

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >