Search Results

Search found 5434 results on 218 pages for 'digital audio'.

Page 79/218 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Hardware Mediaplayer display

  - by Eric Audio

  I'm looking for a keyboard or just a little display to attach on my keyboard or something like that, what will show me the music tracks i'm playing in windowsmedia player, itunes, etc. I did some research and the only thing I found are gaming keyboards, but i'm not shure if these show my music tracks. So my question: Does somebody knows a keyboard who show the music tracks or just a little display? Bye, Eric

  Read the article

• How can I get Windows 7 to switch audio from a monitor (with built-in speakers) to headphones when t

  - by tnorthcutt

  I have an HP dv5t laptop running Windows 7 64 bit with an Acer H235H monitor connected to it via an HDMI cable. The monitor has built-in speakers, which are a huge improvement over the laptop's speakers. However, when I want to use headphones, right now, I have to connect them to the laptop, then right-click the sound icon in the task bar, select Playback Devices, right click the monitor, and disable it. Is there any way to get Windows 7 to automatically switch the output to the headphones when they're plugged in? That's the behavior that happens without the monitor attached (i.e. it will switch from the laptop speakers to headphones when headphones are plugged in). I have the same issue with a Sony Vaio laptop running Windows 7 64-bit and an identical monitor, for reference.

  Read the article

• WinQual: Why would WER not accept code-signing certificates?

  - by Ian Boyd

  In 2005 i tried to establish a WinQual account with Microsoft, so i could pick up our (if any) crash dump files submitted automatically through Windows Error Reporting (WER). i was not allowed to have my crash dumps, because i don't have a Verisign certificate. Instead i have a cheaper one, generated by a Verisign subsidiary: Thawte. The method in which you join is: you digitally sign a sample exe they provide. This proves that you are the same signer that signed apps that they got crash dumps from in the wild. Cryptographically, the private key is needed to generate a digital signature on an executable. Only the holder of that private key can create a signature with for the matching public key. It doesn't matter who generated that private key. That includes certificates that are generated from: self-signing Wells Fargo DigiCert SecureTrust Trustware QuoVadis GoDaddy Entrust Cybertrust GeoTrust GlobalSign Comodo Thawte Verisign Yet Microsof's WinQual only accepts digital certificates generated by Verisign. Not even Verisign's subsidiaries are good enough (Thawte). Can anyone think of any technical, legal or ethical reason why Microsoft doesn't want to accept code-signing certificates? The WinQual site says: Why Is a Digital Certificate Required for Winqual Membership? A digital certificate helps protect your company from individuals who seek to impersonate members of your staff or who would otherwise commit acts of fraud against your company. Using a digital certificate enables proof of an identity for a user or an organization. Is somehow a Thawte digital certificate not secure? Two years later, i sent a reminder notice to WinQual that i've been waiting to be able to get at my crash dumps. The response from WinQual team was: Hello, Thanks for the reminder. We have notified the appropriate people that this is still a request. In 2008 i asked this question in a Microsoft support forum, and the response was: We are only setup to accept VeriSign Certificates at this point. We have not had an overwhelming demand to support other types of certificates. What can it possibly mean to not be "setup" to accept other kinds of certificates? If the thumbprint of the key that signed the WinQual.exe test app is the same as the thumbprint that signed the executable who's crash dump you got in the wild: it is proven - they are my crash dumps, give them to me. And it's not like there's a special API to check if a Verisign digital signature is valid, as opposed to all other digital signatures. A valid signature is valid no matter who generated the key. Microsoft is free to not trust the signer, but that's not the same as identity. So that is my question, can anyone think of any practical reason why WinQual isn't setup to support digital signatures? One person theorized that the answer is that they're just lazy: Not that I know but I would assume that the team running the winQual system is a live team and not a dev team - as in, personality and skillset geared towards maintenance of existing systems. I could be wrong though. They don't want to do work to change it. But can anyone think of anything that would need to be changed? It's the same logic no matter what generated the key: "does the thumbprint match". What am i missing?

  Read the article

• .com domain transfer failing

  - by digital

  Hi, I'm trying to transfer one of my .com addresses between registrars. I'm down as the owner contact (confirmed working) and the losing registrar is down as the tech and admin contact. Last week I received an email stating that the domain transfer had been rejected by the losing registrar. I contacted the losing registrar and they denied that. My money from the winning registrar was refunded and I was told to try again. I've initiated the transfer again and received confirmation of pending transfer, I gave the correct EPP code and confirmed the transfer. Currently the status on the domain is set as OK, should it not be transfer pending? According to my name.com transfer page if the transfer is not authd in 5 days it will auto transfer anyway. I don't believe this will happen. Name.com have been really helpful but they can't really do much more now. The losing registrar is not being helpful hence me turning here. What can I do to make sure the domain transfers? The domain transfer is set to expire on the 17th. Any help would be greatly appreciated.

  Read the article

• Square Reader Modified to Record Off Old Reel-to-Reel Tape [Video]

  - by Jason Fitzpatrick

  The Square Reader is a tiny magnetic credit card reader that has taken the mobile payment industry by storm. This clever hack dumps the credit card reading in favor of snagging the audio from old music reels. Evan Long was curious about whether the through-the-headphones interface of the Square Reader could be used to read audio data off old magnetic recordings. With a very small modification (he had to bend a metal tab inside the reader to allow the audio tape to slide through more easily) he was able to listen to and record audio off old reels. Watch the video above to see it in action or hit up the link below to read more about his project. iPod Meets Reel [via Make] HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux Hack Your Kindle for Easy Font Customization

  Read the article

• Google webmaster tools: parameters that only apply on one page

  - by Imagine digital

  I'm trying to get my e-commerce website on google and still figuring out how it all works. Now, I have seen this feature named URL-parameters, allowing me to set different parameters that affect page content to be indexed (one can also set parameters that do not affect the page, but for me that does not apply..). The question I have about this is whether and how I should add parameters that I only have on some pages of my site. example: The homepage of my site is www.mysite.nl. no parameters at all. But when a user clicks the navigation bar, it links to www.mysite.nl/itemList.php?category=&....subCategory=.... The parameters category and subCategory define whether there is content on my itemList page and what content that is. It gets matching products out of my database based on those 2 variables. The question: How do I make sure that I apply the google URL Parameters function decently for my website?

  Read the article

• Converting from mp4 to Xvid avi using avconv?

  - by Ricardo Gladwell

  I normally use avidemux to convert mp4s to Xvid AVI for my Philips Streamium SLM5500. Normally I select MPEG-4 ASP (Xvid) at Two Pass with an average bitrate f 1500kb/s for video and AC3 (lav) audio and it converts correctly. However, I'm trying to using avconv so I can automate the process with a script, but when I do this the video stutters and stops playing part way through. I have a suspicion its something to do with a faulty audio conversion. The commands I'm using are as follows: avconv -y -i video.mp4 -pass 1 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi /dev/null avconv -y -i video.mp4 -pass 2 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi video.avi There is a bewildering array of arguments for avconv. Is there something I'm doing wrong? Is there a way I can script avidemux from a headless server? Please see command line output: $ avconv -y -i video.mp4 -pass 1 -vtag xvid -an -b:v 1500k -f avi /dev/null avconv version 0.8.5-6:0.8.5-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Jan 24 2013 14:49:20 with gcc 4.7.2 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 Duration: 00:44:09.16, start: 0.000000, bitrate: 669 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 720x404 [PAR 1:1 DAR 180:101], 538 kb/s, 25 fps, 25 tbr, 100 tbn, 50 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2013-02-04 13:53:42 [buffer @ 0x7f4c40] w:720 h:404 pixfmt:yuv420p Output #0, avi, to '/dev/null': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 ISFT : Lavf53.21.1 Stream #0.0(und): Video: mpeg4, yuv420p, 720x404 [PAR 1:1 DAR 180:101], q=2-31, pass 1, 1500 kb/s, 25 tbn, 25 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream mapping: Stream #0:0 -> #0:0 (h264 -> mpeg4) Press ctrl-c to stop encoding frame=66227 fps=328 q=2.0 Lsize= 0kB time=2649.16 bitrate= 0.0kbits/s video:401602kB audio:0kB global headers:0kB muxing overhead -100.000000% $ avconv -y -i video.mp4 -pass 2 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi video.avi avconv version 0.8.5-6:0.8.5-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Jan 24 2013 14:49:20 with gcc 4.7.2 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 Duration: 00:44:09.16, start: 0.000000, bitrate: 669 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 720x404 [PAR 1:1 DAR 180:101], 538 kb/s, 25 fps, 25 tbr, 100 tbn, 50 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2013-02-04 13:53:42 [buffer @ 0x12b4f00] w:720 h:404 pixfmt:yuv420p Incompatible sample format 's16' for codec 'ac3', auto-selecting format 'flt' [mpeg4 @ 0x12b3ec0] [lavc rc] Using all of requested bitrate is not necessary for this video with these parameters. Output #0, avi, to 'video.avi': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 ISFT : Lavf53.21.1 Stream #0.0(und): Video: mpeg4, yuv420p, 720x404 [PAR 1:1 DAR 180:101], q=2-31, pass 2, 1500 kb/s, 25 tbn, 25 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, flt, 128 kb/s Metadata: creation_time : 2013-02-04 13:53:42 Stream mapping: Stream #0:0 -> #0:0 (h264 -> mpeg4) Stream #0:1 -> #0:1 (ac3 -> ac3) Press ctrl-c to stop encoding Input stream #0:1 frame changed from rate:44100 fmt:s16 ch:2 to rate:44100 fmt:flt ch:2 frame=66227 fps=284 q=2.2 Lsize= 458486kB time=2649.13 bitrate=1417.8kbits/s video:413716kB audio:41393kB global headers:0kB muxing overhead 0.741969%

  Read the article

• How to record my voice on a Mac Mini with headphones?

  - by user718408

  I'm try to record my voice via the headphone on a Mac Mini, but it's not working. I saw on Apple's site that the Mac Mini can record voice, but it doesn't seem to be working for me. Here is a hardware overview: Model Name: Mac Mini Model Identifier: Macmini3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.26 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 3 MB Memory: 4 GB Audio: Make: Intel High Definition Audio Audio ID: 65 Headphone connection: Combination Output Line Input connection: Combination Input Speaker connection: Internal S/PDIF Optical Digital Audio Output connection: Combination Output S/PDIF Optical Digital Audio Input connection: Combination Input Any ideas how I can successfully get recording working?

  Read the article

• which default.list should i modify for default applications and what are the differences between the 2

  - by damien

  I would like to add miro to the default application GUI in system settings/default applications.I added ;miro.desktopnext to all rhythmbox.desktop entries eventually discovering if it was not added to audio/x-vorbis+ogg=rhythmbox.desktop as audio/x-vorbis+ogg=rhythmbox.desktop;miro.desktop it would not appear in the system settings/default applications drop down list for audio. I can find default.list in either /etc/gnome/defaults.list or /usr/share/applications/defaults.list modifying either gives me the same results.What is the difference and which is the correct list to modify?

  Read the article

• I got my z-5 Logitech speakers to work, but whenever I restart, I have to reconfigure them

  - by The Bill

  This is the content of my alsa-base.conf file (for some reason, the entries preceded by # are bolded--anyway): autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 alias snd-card-0 snd-usb-audio alias snd-card-1 snd-hda-intel options snd-usb-audio index=0 options snd-hda-intel index=1 Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 options snd-usb-audio index=-2 options snd-usb-audio index=0 alias snd-card-0 snd-usb-audio alias snd-card-1 snd-hda-intel options snd-hda-intel index=1 I deleted a line that said something like "#Keep usb-audio from being loaded as first soundcard" and that made the speakers work for the first time (before this, they never showed up). I also added the last four lines. Anyway, what can I add to this so that I don't have to reconfigure them each time I restart? Currently, I have to open Sound Settings, then under the hardware tab, select Analog Stereo Output, and then unplug my USB speakers and plug them back in. This makes them pop up so that I can see them. Otherwise, it will not show my Z-5 speakers as a device that can be configured.

  Read the article

• map based on specific type of stream

  - by Steven Penny

  Consider the following file Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'infile.mp4': Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 1920x1038 Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 48000 Hz, 5.1, fltp, 386 kb/s Stream #0:2(eng): Audio: aac (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 124 kb/s I would like to run a command that uses the video and only the stereo audio. With this particular file I could just run ffmpeg -i infile.mp4 -c copy -map v -map :2 outfile.mp4 However this will not work if the audio streams are switched. How can I tell FFmpeg to use the 2 channel audio only?

  Read the article

• No sound after installing a new Graphics Card

  - by Dan

  I've just upgraded my graphics card to an Asus Geforce 210 and now my system has no sound. I've ran Update Manager and the Additional Drivers utility which installed the latest Nvida driver. The graphics card is connected to my TV via a DVI-to-HDMI (DVI at the PC end) cable for the visual connection, and an audio jack from my onboard soundcard for my audio connection. Any ideas on how to resolve this? I ran this command ubuntu-bug audio And it outputted this: You seem to have configured PulseAudio to use the "pci-0000_05_00.1" card, while you want output from "NFORCE - NVidia CK804". I've tired a bit of messing about with the audio settings but can't get anything to work.

  Read the article

• mediaelement.js control sizes are wrong when clip nested in a hidden element

  - by Martin Francis

  It's a nasty one this. In an audio control placed within a container element whose display property is initially set to none, the audio clip does NOT correctly size the progress bar when it is initialised. This is clear when the container's display property is changed from 'none' to '' (which is equivalent to 'static'). But who would ever do that? I make extensive use of 'tabbed' display arrangements on community sites like this one: http://www.churchesInBracebridge.ca Owing to the page arrangement, the audio controls which you see under 'sermons' (which at the time of writing still using Flash rather than John's excellent library here) are initially rendered in a div that is hidden. Simplified Test case Rather than have anyone have to wade through all of that, here's a much simplified test case: http://jsfiddle.net/sJL6T/36 Here's the full page source for those who'd prefer to work with it that way. <!DOCTYPE html> <html> <head> <meta http-equiv="content-type" content="text/html; charset=UTF-8"/> <title>MediaElementPlayer.js</title> <script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script> <script src="http://mediaelementjs.com/js/mejs-2.13.1/mediaelement-and-player.js"></script> <link rel="stylesheet" href="http://mediaelementjs.com/js/mejs-2.13.1/mediaelementplayer.css" /> <script type="text/javascript"> function toggle(id){ document.getElementById(id).style.display= (document.getElementById(id).style.display=='none' ? '' : 'none'); } </script> </head> <body> <h1>MediaElementPlayer.js</h1> <h2 onclick="return toggle('test1')">Initially Hidden (Click to toggle)</h2> <div id='test1' style='display:none'> <audio controls="controls"> <source src="http://mediaelementjs.com/media/AirReview-Landmarks-02-ChasingCorporate.mp3" type="audio/mp3" /> </audio> </div> <h2 onclick="return toggle('test2')">Initially Shown (Click to toggle)</h2> <div id='test2' style=''> <audio controls="controls"> <source src="http://mediaelementjs.com/media/AirReview-Landmarks-02-ChasingCorporate.mp3" type="audio/mp3" /> </audio> </div> <script> $('audio').mediaelementplayer(); </script> </body> </html> Possible Workarounds Now I know that Google maps has the same quirk and there are two possible ways I've used to deal with that: Use absolute positioning in a displayed div to place the element 10,000px to the left then bring it onto the stage when we want to see it Have the map pane displayed when loading then hide it as soon as it's loaded (ugly I know, but it usually works) However either approach would be a pain to do, as I have a lot of legacy code using the simpler div hiding method. I know that JQuery can get the dimensions of an element event if it is hidden - someone thoughtfully fiddled that and it does work: http://jsfiddle.net/sJL6T/9 Perhaps it may be possible to modify the actual library to find correct dimensions, even if the container itself is hidden? That would be wonderful, if it can be done! Initial experiments on mediaelement-and-player.js code I found that when I provided a fixed value in the setControlsSize function for railWidth, I got consistent results with both controls in the test case above (and obviously I'm working with my own copy of the library to do that, not the one stored at mediaelementjs.com): // outer area rail.width(railWidth); Change to this: // outer area railWidth=216; rail.width(railWidth); Many thanks in anticipation! Martin Francis <<

  Read the article

• How to change the volume of left channel using pulseaudio

  - by user2622247

  I am recording the video using logitech camera and bluetooth microphone. Logitech can used for recording both audio and video. When I turn on bluetooth microphone in the middle of recording, it is replacing the logitech audio channel due to this we are getting the bluetooth audio from the left channel. But when I turn off the bluetooth then I get the logitech audio on left channel but the volume is very low and also getting the some noise. I am using PulseAudio and ffmpeg for recording purpose. So how can I increase / change the volume of left channel during runtime?

  Read the article

• Periodic clicking sound from PC speaker

  - by John J. Camilleri

  After an update some months ago, my laptop has begun making a low, repeated clicking sound every few seconds. It is not being generated through the regular sound system, as altering the volume and even muting the sound does not make any difference. My regular audio works fine, by the way, so I am guessing this is some sort of PC speaker, since I cannot hear the click when I listen through regular headphones. Strangely, when I open the sound settings dialog the click magically disappears. I don't need to change any settings; if I simply leave the dialog open in the background then the problem disappears. Any ideas what this could be? I am running regular Ubuntu 12.04, and this is the output from lspci -v | grep -A7 -i "audio": 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 0349 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 54200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• Loud and annoying noise on login

  - by searchfgold6789

  I have a PC with Kubuntu 13.10 64-bit on it. The problem is that whenever I log in (automatic log in is enabled), there is a loud double-click noise that sounds from the speakers whether the volume is muted or not. I have two sound cards; the motherboard audio, which is disabled in the BIOS, and the Creative! Labs Sound Blaster X-Fi SB0460, which I have normal speakers plugged into. Does anyone know how to fix this? Relative lspci lines: 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] 02:05.0 Multimedia audio controller: Creative Labs SB X-Fi Using default Phonon backend. (I am not really sure what other information to provide, but will gladly edit in anything upon request.)

  Read the article

• Sound card not detected in 13.04

  - by Ganessh Kumar R P

  I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

  Read the article

• How can I use two video cards to power three screens?

  - by notatoad

  I have two Radeon 6450 graphics cards in my computer, with three screens. Only the screens plugged into the first graphics card are recognized and configurable in the displays setting panel. How can I use the displays plugged into my second graphics card? Both cards are present in lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 01:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] 02:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 02:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] I'm using the open source driver instead of the proprietary driver because the proprietary driver won't output 1440x2560.

  Read the article

• Why did this command make my Ubuntu more awesome than before?

  - by the_misfit

  After running Ubuntu for months and liking it, I for the first time wanted to use headphones and was trying to get them to work so I ran the code in step 1 https://help.ubuntu.com/community/SoundTroubleshootingProcedure -- the result was an improvement in performance, resolution, and audio.. a vast improvement. What does that suggest about what was wrong with my settings before if running this improved system performance, graphics, and my audio problem? The command is: sudo add-apt-repository ppa:ubuntu-audio-dev/ppa; sudo apt-get update;sudo apt-get dist-upgrade; sudo apt-get install linux-sound-base alsa-base alsa-utils gdm ubuntu-desktop linux-image-`uname -r` libasound2; sudo apt-get -y --reinstall install linux-sound-base alsa-base alsa-utils gdm ubuntu-desktop linux-image-`uname -r` libasound2; killall pulseaudio; rm -r ~/.pulse*; sudo usermod -aG `cat /etc/group | grep -e '^pulse:' -e '^audio:' -e '^pulse-access:' -e '^pulse-rt:' -e '^video:' | awk -F: '{print $1}' | tr '\n' ',' | sed 's:,$::g'` `whoami`

  Read the article

• Intermittent sound on an Medion Akoya S5610

  - by ej159

  The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

  Read the article

• Morse Code Generation from Text

  A PHP script to generate an audio Morse code file from text

  Read the article

• No sound for headphones

  - by Joel Lino

  I was trying some of the solutions published in this forum for the same problem, but just one in particular work for me: add the line of code in the file alsa-base.conf. This just works for a few days, now the problem is back again. Any solution to fix this problem for good? Compaq Presario CQ40 $ lspci | grep -i audio 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller

  Read the article

• How to get espeak working?

  - by wisemonkey

  I'm trying read it loud feature of acrobat, so need a text synthesizer, I've installed espeak and libgnome-speech libraries (it didn't work for acrobat right out of the box) so when I started espeak-gui through command line it gave me segmentation fault next I tried only espeak and here is output: ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started Any ideas? or any alternative solutions for read it loud? Thanks

  Read the article

• Intermittent sound

  - by ej159

  The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

  Read the article

• HyperCam

  A cool new app that captures audio and video content from your desktop

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >