Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 79/402 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

  • Re-Initialize RAID-0 in software after card failure

    - by Ben
    I'm working on a Friend's WD MyBook "1TB" HDD that is not mounting. When I got in to it, I discovered that it is really 2 500GB HDD's set up as RAID-0. It appears that the drives themselves are fine, but that the logic board has failed. My questions is this: can I re-initialize the RAID-0 using software RAID so that I can recover the data to another drive? If so, how and which software RAID would be best (Preferably open source. any platform OK).

    Read the article

  • Win 7 Netbook refuses to ping JetDirect card (all other PCs work)

    - by Luke Puplett
    I have an odd thing occuring here. From a Windows 7 netbook, I cannot ping an HP printer on the network, while all other machines (Win7/Vista) can. And the netbook can also ping everything else on the LAN. Example showing that the netbook can ping 192.168.3.4 but not 3.6. C:\Users\backdoor>ping w7ue1m Pinging w7ue1m.corp.biz.co.uk [192.168.3.4] with 32 bytes of data: Reply from 192.168.3.4: bytes=32 time=7ms TTL=128 Reply from 192.168.3.4: bytes=32 time=4ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Ping statistics for 192.168.3.4: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 2ms, Maximum = 7ms, Average = 3ms C:\Users\backdoor>ping uktnprint1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Ping statistics for 192.168.3.6: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),`enter code here` The IPCONFIG result for the netbook is fine. IPv4 Address. . . . . . . . . . . : 192.168.3.0 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Most unusual network thing I've seen in years. I must reiterate that only this netbook is having trouble pinging/printing. Thanks, Luke ** UPDATE ** Am now on a Vista box, and here's the IPCONFIG: IPv4 Address. . . . . . . . . . . : 192.168.3.3 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.6: bytes=32 time=2ms TTL=60 Firewall is off. I'll look into the chance of an IP conflict because it's the only thing I can think of - compare arp caches of each machine. Cheers!

    Read the article

  • Upload of photos from cf card to pc is super slow

    - by Sharon
    I have a new custom built pc. It has 8B of RAM and was working like a dream. Suddenly it is super slow and taking hours to download photos that used to take just minutes. I notice that there is 8GB RAM but only 3,25GB usable. could this be the problem? If so how to I change it? I'm using Windows 7

    Read the article

  • how to run an AFS file server on a specific ethernet card (in Debian)

    - by listboss
    I have a linux box running Debian server with minimal number of packages (so no GUI for network management). The box has two ethernet cards, one of which (eth0) is connected to a Mac OSX computer using a cross-cable. I can bring up eth0 and assign a static ip (10.10.11.16) to it. This way I can ssh to the box through the cross-cable. This is what I run on Linux box: ifconfig eth0 10.10.11.16 netmask 255.255.255.0 up I also installed/started a file server (AFS) on Debian. So far, the file server can only be accessed through eth1 which is exposed to my home LAN and www. My goal is to set up the file server so that it's only visible through eth0. Is this possible? and if yes, how can I do it?

    Read the article

  • Workstation Card

    - by david
    I am going to buy an HP EliteBook 8740w. The problem is it comes with Nvidia quadro 2800m and ati 7820m firepro 3d? please advise which is better?

    Read the article

  • Ubuntu network card problem.

    - by Steve Greene
    Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

    Read the article

  • Video card recommendation?

    - by user26453
    These are my requirements: Can support latest DirectX/OpenGL standards Dual DVI output required Less than $100 Does not need to excel at gaming Does need to provide hardware acceleration for Windows 7 and Visual Studio 2010 via WPF. Bonus points: Supported in OSx86 land. Quiet and low power. I tend to lean towards nvidia because I'm used to their drivers and their software (nview, etc.)

    Read the article

  • good PCI-e Wireless card for Windows7?

    - by benwebdev
    Hi I've just build a 64bit Windows 7 PC but am unhappy with the piddly performance of the linksys USB wireless dingle I've used. Can anyone suggest a good PCIe alternative that will be stronger for connection and maybe faster. I dont see why my desktop should show a weaker performance on wireless than my laptop when its sat next to it or even my Palm Pre for that matter. any thoughts? UK based max around £60ish. thanks, Ben

    Read the article

  • VMWare hypervisor with only 1 network card?

    - by Rafiq Maniar
    VMWare hypervisor minimum requirements states that the minimum network requirements is: one NIC, plus one for Management interface (source: http://www.vmware.com/products/datacenter-virtualization/vsphere-hypervisor/requirements.html) It used to be possible to use 1 NIC only. Is anybody using the new versions of VMWare in this configuration? I ask because my colo provider will only provide me with 1 uplink (my server does have 2 NICs). I need to be able to run the VMs and also have remote management using only 1 NIC. Possible?

    Read the article

  • I need a wirless interenet card thingy for my stationary computer

    - by user60859
    Going to move my stationary computer and hook it up to the TV. Which is far away from the wireless router. So i'm going to need a way to go on the Internet wirelessly from my stationary computer. I was looking at some of those.. wireless pci adapter things. But i have no idea which one would be compatible with my computer. How can i tell? oh i have a pentium 4, Windows XP like 600 megs of ram in case any of that matters.

    Read the article

  • Wacom consumer tablet driver service may crash while opening Bamboo Preferences, often after resuming computer from sleep

    - by DragonLord
    One of the ExpressKeys on my Wacom Bamboo Capture graphics tablet is mapped to Bamboo Preferences, so that I can quickly access the tablet settings and view the battery level (I have the Wireless Accessory Kit installed). However, when I connect the tablet to the computer, in wired or wireless mode, and attempt to open Bamboo Preferences, the Wacom consumer tablet driver service may crash, most often when I try to do so after resuming the computer from sleep. There is usually no direct indication of the crash (although I once did get Tablet Service for consumer driver stopped working and was closed), only that the cursor shows that the system is busy for a split second. When this happens, the pen no longer tracks on the screen when in proximity of the tablet (even though it is detected by the tablet itself); however, touch continues to function correctly. To recover from this condition, I need to restart the tablet driver services. I got tired of having to go through Task Manager to restart the service every time this happens, so I ended up writing the following command script, with a shortcut on the desktop for running it with elevated privileges: net stop TabletServicePen net start TabletServicePen net stop TouchServicePen net start TouchServicePen Is there something I can do to prevent these crashes from happening in the first place, or do I have have to deal with this issue until the driver is updated? Windows 7 Home Premium 64-bit. Tablet drivers are up to date. Technical details Action Center gives the following details about the crash in Reliability Monitor: Source Tablet Service for consumer driver Summary Stopped working Date ?10/?15/?2012 2:48 PM Status Report sent Description Faulting Application Path: C:\Program Files\Tablet\Pen\Pen_Tablet.exe Problem signature Problem Event Name: APPCRASH Application Name: Pen_Tablet.exe Application Version: 5.2.5.5 Application Timestamp: 4e694ecd Fault Module Name: Pen_Tablet.exe Fault Module Version: 5.2.5.5 Fault Module Timestamp: 4e694ecd Exception Code: c0000005 Exception Offset: 00000000002f6cde OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 9d4f Additional Information 2: 9d4f1c8d2c16a5d47e28521ff719cfba Additional Information 3: 375e Additional Information 4: 375ebb9963823eb7e450696f2abb66cc Extra information about the problem Bucket ID: 45598085 Exception code 0xC0000005 means STATUS_ACCESS_VIOLATION. The event log contains essentially the same information.

    Read the article

  • Why doesn't the monitor output anything in Linux console mode?

    - by flypen
    I install Linux without graphics support. Previously I used a monitor with 720p support. And it can display normally. Now I change to a monitor with 1080p support. I can see BIOS and GRUB info on monitor, and kernel messages in early stages. However, the monitor says that there is no input immediately, and then I can't see anything again. It seems that it happens after something initializes. Is it related to vesafb? vesafb: mode is 1280x1024x32, linelength=5120, pages=0 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 mtrr: type mismatch for 7f800000,800000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,400000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,200000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,100000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,80000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,40000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,20000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,10000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,8000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,4000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,2000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,1000 old: write-back new: write-combining vesafb: framebuffer at 0x7f800000, mapped to 0xffffc90011380000, using 5120k, total 5120k Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device

    Read the article

  • Eee PC Seashell series netbook screen is cut off at bottom no matter the resolution

    - by Yzmir Ramirez
    I have an Eee PC 1015PE Seashell netbook running Windows 7 Home Premium with an Intel Graphics Media Accelerator 3150 (8.14.10.2230) with a "Generic Non-PnP Monitor" detected. I tried: Changing the resolution (Control Panel = Appearance and Personalization = Display = Screen Resolution) to 1024x768 Updating the video driver (to 8.14.10.2230) Uninstalling the driver and rebooting Pressing the Windows Key + "-" (magnifier) Pressing Ctrl + Mouse Scroll only resizes the desktop items Pressing Fn + F4 shows 1024x600 (which I think is what I should be using, but nothing happens) EDIT: Changed from Landscape to Portrait and it works Attached an External Monitor and when I extend or set as desktop it works only on the External Monitor (shows up as "Generic PnP Monitor in Device Manager) Basically the bottom inch of my desktop is off-screen hiding my start bar, but my wigets are in their proper position (the start bar is not hidden). Pressing Ctrl + Esc shows the start menu but its cut-off. I'm pretty sure I should be using 1024x600 resolution, any advice? What's odd is that this only started happening recently. EDIT2: Here are some screenshots showing the problem: Resized Window to fit: Opened Start Menu - notice it cut off: Maximized window and then scrolled down - notice no Start Menu: I downgraded my graphic driver I downloaded from the Intel Download Center for the Graphic Media Accelerator 3150 (now: 8.14.10.1972) and now my "Generic non-PnP Montior" detects as "Digital Flat Panel (1024x768 60Hz)".

    Read the article

  • What is the replacement of the floppy

    - by alexanderpas
    While CD (and to an lesser extend DVD) disks have reached the price-point of the floppy, they have one significant downside, it is WORM (Write-Once Read-Many) media, allowing it to be used only one single time, and you need to be explicit in writing the data to the actual media (you need to burn it.) While CD-RW solves the "use only once" problem, it is still EWORM (Erasable Write-Once Read-Many) media, which still means you need to be explicit in writing the data to the actual media (you still need to burn it.), and also, you still need to be very explicit in erasing it. (simple delete is not possible.) Okay, we can use a CD-RW in Packet Writing mode, however the downside to that, is that this mode is not very universal, and also, not the native mode of the media. Now, while USB-sticks and SD-cards may not have the poblems of the CD, they have a whole other kind of problem: their PRICE! USB-sticks and SD cards are generally 10 to 100 times as expensive as diskettes per piece. SD-cards, in addition have an added problem, because they need a reader to operate. While it is a very standard thing, it is not default equipment on the computer like the CD drive or USB port (or historically the diskette drive). You wouldn't give out an USB stick or SD card with a 100 kB text file, not caring weither you would get it back or not. So, to recap: CD & DVD are basically WORM media. SD cards and USB sticks are relatively expensive. SD cards also needs special readers. Diskettes have a very low data-rate Diskettes have a very low storage capacity. Now, is there a media out there that solves all these problems, or is there a way to get (very) small USB sticks or SD cards for a very low price (as they're the closest thing to diskette).

    Read the article

  • Distortion problem with Creative audio equalizer

    - by e-t172
    Hi, I have a problem with the Creative Console EQ, I don't know if it's fixable or not (is the EQ software or hardware on these cards?). Basically, I have enormous distortion with certain sounds in the 30 - 125 hz range. When this happens I get some sort of "frrzzzz" (sorry, I'm french and don't really know the correct english word for that) on top of the original sound. I have a Sound Blaster Audigy SE. I'm using the Daniel_K drivers, on Windows 7 Profesionnal x64. All the effects are disabled except EQ. Steps to reproduce Put the card in 24bit/96khz mode. The problem is also present with 16bit/48khz but seems to be less audible. In the Creative Console, use the following EQ: (full size) Play this sound at a reasonably high volume. You should hear distortion on the two "booms". Especially the second one. Disable Creative EQ. Play the sound in an application with an integrated EQ (e.g. foobar2000, ffdshow) using the same EQ parameters. There is no distortion. Conclusion: the Creative EQ is broken. Is anyone having the same problem? I'm also interested in the results with other Creative cards or even other brands soundcards with a similar EQ feature.

    Read the article

  • Adjust output Brightness/Gamma/Colors in Gnome

    - by Mikee
    We have a desktop system running Ubuntu 8.04.4, and it is connected to a standard desktop LCD monitor. Unfortunately, in 8.04.4, the brightness of the image is cranked way up. It appears to be a graphics driver issue. Unfortunately, installing a newer GPU driver for this Intel GPU is very difficult to do. So, I am looking for a software (or config file?) solution to achieve this. Note: Ubuntu 9.10 and higher do not exhibit this issue, so this is not a hardware problem. Note: VNC-ing to this machine from another does not exhibit this issue either. Also, I installed "DisplayCalibrator.app", and it does not work very well (the app comes up, but the contents of the window are blank). Is there anything that I can add to the xorg.conf file to correct this issue? Also, this solution: http://superuser.com/questions/96539/adjust-contrast-and-brightness-in-ubuntu did not resove my issue. Thank you all for the help!

    Read the article

  • ATI Firepro v4800 3 monitor support

    - by Jared275
    I have an interesting, yet very frustrating problem. I have two computers, both running win7 32 bit, and both with ATI Firepro V4800 graphics cards. Both are using the DVI port and two DP to DVI adapters to connect 3 monitors. One of them is able to display three desktops, while the other fails at enabling the third, displaying "cannot save changes" in display properties while requiring that one monitor must be disabled when making the change in CCC. I've verified that both computers have the same driver version and that both are using the same DP-DVI adapters. This articles suggests a few things to try, but none of its suggestions seem to work either. I'm kind of at my wits end, hence my posting here. If this is not an appropriate question for SU, I apologize. I admit that I am not very familiar with the differences between dual link and single link DVI, and that is something I have not verified is standardized between the two computers. Is that a possible reason one is working and the other isn't? How do I check if the DVI cable is a single link, or dual link?

    Read the article

  • Weird glitches on Intel iGPU

    - by FrederikVds
    I have a weird problem that I can't manage to describe in one word, so I'm having trouble searching for a solution. My monitors sometimes go black for a tenth of a second. Other times, they show the image shifted a few centimeters to the left or to the right. This happens on both of my monitors, but not necessarily at the same time. I would say it happens about once a minute, unless under heavy load, in which case it can happen every second or so. Interestingly, heavy CPU/memory usage can also cause this, not just heavy GPU usage. This only happens when they are both at 1920x1080, not when one of them, or both, are at a lower resolution. It also happens when they are in mirrored mode instead of extended desktop mode. My GPU is obviously not at full clock speed most of the time: this happens at 350 MHz as well as at 1200 MHz. So it doesn't seem like a matter of too little performance. I'm not seeing any traditional artefacts, even when I use MSI Kombustor, only this kind of full-screen glitches. CPU stressing software isn't reporting any issues either. I'm thinking maybe the connection between my CPU and my PCH isn't fast enough, but I can't find anyone with the same problem to confirm that. I'd rather not invest in a discrete GPU without being certain it will fix something. Does anyone know how to search for this, or even better, does anyone have a solution? My full specs are below. Thanks in advance! Specs: ASUS P8Z77-M Intel Core i5-3570K (with Intel HD 4000 Graphics) 2x4 GB AMD Performance Edition memory Corsair Force 3 Series Rev. B 120GB SSD Maxtor 200GB HD Lite-On DVD-RW Antec 350 Watt PSU 64-bit Windows 7 Professional 2x Iiyama ProLite E2208HDS display

    Read the article

  • Windows 7 Media Center: sometimes no sound on a TV channel

    - by torbengb
    Problem Sometimes, recorded TV shows have no sound. This is of course very annoying because the recorded show is worthless. Also, when switching channels while watching live TV, sometimes a channel has no sound. This is always solved by switching channel again and then back (most often, once will do the trick). Media Center doesn't do this trick by itself when recording of course, so that's the bigger issue - but the cause is certainly the same. Details The computer is running a newly installed Windows 7 and Windows Media Center. It has 2 different tuner-cards installed. Both are installed with signed and up-to-date Win7 drivers and appear OK in Device Manager. Both tuners get the same antenna signal, from a split cable from the wall. The cable delivers analog cable TV (40+ channels) and digital cable TV (4 channels) at the same time. Both tuners have been configured to receive both analog and digital channels. This only happens with analog channels. How can I fix the no-sound problem? Update: I've now spent some time with the computer to try and pinpoint the problem, but I've had little success so far: I flipped through the channels until one didn't have sound, then I disconnected the antenna cable from one of the tuners. It was the right one because then the video also went away. I flipped lots more channels to see if the other card also would come up mute once but I never had a channel without sound. It might still be possible, I don't know. Then I disconnected the "good" tuner and connected the "bad" tuner and again flipped lots of channels but again I never had a channel without sound. It seems to me that the problem is erratic. It happens on any channel, and I haven't ruled out yet that it only happens on one tuner.

    Read the article

  • How to boost playback volume in real time on media recorded with a very low volume.

    - by L Marksman
    I have never heard a satisfactory answer to this often misunderstood question, let me explain. Lets say I have a sound card and earphones/speakers that can play back audio loud enough in most cases. This is great but the problem is that you always find people who do not know how to record audio, from Youtube video's to music. So now you end up with a audio playback that only uses 10% or less of the capacity of your sound hardware, in vista/win 7 you will see this frequently in the mixer with the volume pushed up to max but the green sound level only goes up a millimeter or two. I am looking for (preferably free) software or a method to boost the sound level of any audio from any source in real time to use more of my hardware capacity similar to what VLC media player can do. Oh and please, do not tell me it is impossible. I am not trying to boost the volume past what my hardware is capable of, I am just trying to use my hardware's full capacity. Also please do not tell met to buy new hardware, I know I can use hardware amplification, I don't want to (like many others) spend money on a simple little problem like this. Thanks!

    Read the article

  • Dual Monitor/Xinerama not working; cannot even detect on-board graphic card

    - by Steven H
    I have Kubuntu 12.04 and two identical VGA monitors. One I plugged via DVI-VGA adapter into the DVI port of my discrete AMD Radeon HD 6670, the other into the VGA port of my on-board graphic card (Radeon HD 6410D). After installing Kubuntu I got a black screen, so I booted with nomodeset and installed AMD's catalyst drivers but only the monitor plugged into the discrete graphic card worked. Using lspci I saw that the on-board graphics was not listed. Then I found in the BIOS settings the options "Surround View" and "Onboard Dual Link DVI" both disabled. After enabling both, the on-board graphics card shows up in lspci but in amdcccle, it only shows as [Uknown display]Uknown adapter. When I try to enable xinerama, I get a black screen after rebooting on both monitors. I tried several options and hints from the web but nothing worked so far. I also reinstalled the AMD drivers several times. What should I do?

    Read the article

  • What video graphic card would permit ubuntu's standard driver to work well?

    - by Rick
    I installed ubuntu 12.04. All seemed well until I installed the nvidia driver. Then crashola! This situation is untenable. It seems I cannot trust nvidia, and it seems that I cannot rely on ubuntu gurus to test 3rd party drivers. So, apparently some video card manufacturers do not care enough about the linux market to test their drivers, or are there too many 3rd party video cards so that ubuntu folks do not test any 3rd party video drivers? Hence the question: What video graphic card would permit me to use ubuntu's standard driver so that I do not have to rely on nvidia's or any other 3rd-party driver? Perhaps I could then install THAT card and have things work? The ubuntu standard driver actually worked prior to installing the nvidia driver, but not well, and that was because the display flickered, and flickering gives me a headache.

    Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >