Search Results

Search found 23832 results on 954 pages for 'home drive'.

Page 79/954 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Unable to boot from USB boot drive for AMD Athlon 64

  - by Nagarjun

  I am trying to install Ubuntu 13.04 ISO for AMD64 Athlon processor using USB drive (8GB). I did create a bootable USB using the USB installer from Win7 intel 32bit processor (followed steps from here: http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows). This USB is unable to boot on my AMD64 bit processor. The bios is able to detect the USB and once I change the boot order to USB and save exit from bios, I get a message saying "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS CONTINUE" and unable to proceed further. However earlier to this I have successfully installed Ubuntu 13.04 on to my laptop which has Intel 32 bit core i5 processor with the same procedure but my desktop which has AMD64 is failing. I also tried to create the USB installer on my desktop which has the AMD64 bit processor and tried booting which also resulted in the same error. (My desktop currently has Win XP) Please help as I have run out of options. thanks, Nagarjun

  Read the article

• Installed Ubuntu using WUBI due to lack of CD Drive

  - by Chantelle

  I have installed 12.04 via WUBI because my computer does not have a CD Drive. Is there any way that I can delete Windows 7 from my computer and use the whole HD for Ubuntu? I ask this question because for one reason or another I cannot boot from a boot-able USB stick (either in Windows or Ubuntu, however the USB port works because I am able to use my cell phone's tethering plan using all the USB ports to connect to the Internet). Edit: Just found out the problem. Eee PC Model 1018p's do not boot from any format other than FAT and FAT16 and not FAT32.

  Read the article

• Remove drive partitions before Installing 12.04?

  - by newbie

  I have an old box and want to switch to Ubuntu 12.04. It has two hard drives. The first is a 40 gig disk that runs Windows XP; the other is 80 gigs partitioned into 40, 20, and 20 gigs. I am prepared to abandon Windows altogether and everything stored on the drives. So my question is, do I just install from CD/DVD onto the C drive? Or onto one of the partitions in the other disk first and then uninstall Windows? What will happen to the partitions on the second disk, which I don't particularly see a need for? Thanks in advance for any advice.

  Read the article

• How to restore my D Drive

  - by buggi

  I need help in recovering one of my drives from my windows7 machine. I used to have two drives, c and d. I used D to save all my data. i have been using my laptop from 3years. and when I saw it today, i cant find D drive on my computer :( . When I opened the parititioning wizard it showed me that the space I allocated for D is there but as unallocated space. I badly need the data from D. Can you please suggest if I can use ubuntu to recover D? Thanks in advance.

  Read the article

• Add a small RAID card? Will it help overall stability and performance of my nine hard drives?

  - by Ray

  Hi, Will I get any extra genuine added performance and RAID stability if I insert a basic RAID card into a PCI-E x1 slot? I am considering the Adaptec 1220SA - 2 port SATA , pci-express (1x) , raid 0/1. Ok it only supports two SATA drives. Purpose is to help support the eight internal hard drives (1TB each), a DVD drive and an external e-SATA connected 2TB hard drive - by dealing with two of the internal hard drives. My current configuration of eight internal 1TB Barracuda (7200.12) SATA hard drives, one external 2TB SATA Western Digital Green Drive (e-SATA) and one DVD drive can already be supported by the Intel P55 & JMicron controllers on the ASUS motherboard : the Intel P55 (controls six HDD; configured as three x RAID 1), and the JMicron (controls two HDD as one RAID 1, as well as the DVD drive and the external SATA drive via the motherboard's e-SATA port (controlled by the JMicron)). Bigger picture details : I have an ASUS motherboard designed for the LGA1156 type processor and it includes the Intel P55 Express Chipset and JMicron. I am using the Intel Core i7-870 processor, and have 8GB DDR3 (1333) memory (four x 2GB Corsair DIMMs). Enough overall power. The power supply is more than sufficicient for the system. Corsair AX850. The system will never need the full 850 watts (future : second graphics card). The RAID card would provide hardware RAID 1 for two of the eight intrnal drives. It would either reduce the load on : the Intel P55 firmware RAID support, or replace the JMicron controller's RAID 1 set. I am busy installing the above configuration using Windows 7 Ultimate 64-bit as the OS. The RAID card is a last minute addition to the plan. Is it worth spending the extra R700 - R900 on the Adaptec 1220SA, or equivalent RAID card? I cannot afford to spend yet another R2000 - R3000 on a RAID card that would support many SATA2 hard drives, with a better RAID, example the RAID 5. My Issue & assumption : I am trusting that the Intel P55 chipset can properly handle six drives, configured as three * RAID 1. I am assuming that the JMicron can handle, using its RED SATA ports, one RAID-1 (two HDDs). The DVD drive connects to the JMicron optical SATA port 1 (white port 1). White port 2 is not used. The e-SATA connection is from the JMicron straight to, and through the motherboard - to an on-board (rear panel) e-SATA port. Am I being a little hopeful in only using the on-board Intel P55 and the JMicron? Is it a waste of money to install a RAID card that handles two SATA2 drives? OR Is it wisdom to take the pressure a little off the Intel P55? Obviously I am interested in data security, hence RAID 1, not RAID Zero. RAID 5 would be nice. The CPU, Intel Core i7-870 will provide the clout. Context to nine drives : I am using virtualisation with Windows 7 Ultimate. Bootable VMs. The operating system gets a mirror. Loaded apps gets a mirror. The current design data is kept in another mirror and Another mirror is back-up one and / or VM territory. Then the external 2TB drive (via e-SATA) is the next layer of data security and then finally, I use off-site data security. Thanks.

  Read the article

• What is the deal with hard drive technology moving to 4K sectors, vs. 512 bytes? Are 4K sector disk

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the actual de facto standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• Original Windows 7 Home Premium on Acer Aspire 5740G

  - by elr

  Is it posible to get the original Windows 7 Home Premium 64bit for the Acer Aspire 5740G? I bought this notebook and the license for this Windows is in the package. There is an partition with the data for the recovery. But than, there are a lot of senseless application which I don't want to use. I'm searchin for the complete clear Windows 7 Home Premium. I tried to download the original Windows 7 Home Premium and entered the serial key of the bottom of the laptop but I can't activate my Windows with this key. Any ideas or experiens with this?

  Read the article

• Running Mac OSX 10.6 my users home directory is wrong

  - by Erik Miller

  Somehow my home directory on my mac machine has been changed and I'm not sure how to go about changing it back, I'm more of a linux guy and mac has some other mechanism for storing that information. Basically when I log into the machine normally than start a terminal window. I start in the /Users/erik_miller directory, which is my home directory, but when I run some this like cd ~ The machine tries to change to /Users/erik_miller. Yes, the same path with a period on the end. I can change my $HOME environment variable for the session, but the next time I start the machine it reverts. So, I think if I can find where that information is stored I can just change it there and hopefully all will be well.

  Read the article

• How to track $HOME with git

  - by Francesco

  Hello, I would like to track my $HOME dir with git. I've got many other git repos in other subdirs (eg $HOME/projects/repo_1 and so on), which shouldn't be tracked, since they already are. I have found git-home-history but it appears from the archive that the project is no longer actively developed. What approach do you recommended ? Is ghh mature enough? I am on a Mac but I am interested in cross platform solutions, too. Thanks, Francesco ps: btw this is my first Super User question :-) I have looked but didn't find duplicates, please point me if this has been already discussed.

  Read the article

• Running Mac OS X 10.6 my users home directory is wrong

  - by Erik Miller

  Somehow my home directory on my Mac has been changed and I'm not sure how to go about changing it back, I'm more of a linux guy and Mac OS X has some other mechanism for storing that information. Basically when I log into the machine normally than start a terminal window. I start in the /Users/erik_miller directory, which is my home directory, but when I run some this like cd ~ The machine tries to change to /Users/erik_miller. Yes, the same path with a period on the end. I can change my $HOME environment variable for the session, but the next time I start the machine it reverts. So, I think if I can find where that information is stored I can just change it there and hopefully all will be well.

  Read the article

• Planning home network

  - by gakhov

  I'm planning to setup my home network from scratch and want to ask professional opinions or tips. My home is connected to Internet with a cable connection (100 Mb/s). The devices I would like to connect are VoIP phone (RJ-45), TV (WiFi/LAN), 3 laptops (WiFi), 2 smartphones (WiFi), an iPad (WiFi), a Kindle (WiFi), a network printer and, probably, a home media storage (WiFi/LAN). As you can see, the most load will be on WiFi connections (probably, even if TV supports WiFi it's better to connect it by LAN?). So, I need help to choose the best router (or combination of routers) to support stable connections for all these devices and minimize the total number of routers/adapters. I like how Cisco/Linksys devices were working for me in the past, so preferably (but not obligatorily) I want to setup network with their solutions. Any thoughts?

  Read the article

• Why does WebDAV fail from inside home network

  - by Claus

  On my OSX server there is a folder that is configured in the Server App to be accessible via WebDAV. This folder is used to sync OmniFocus. On my router, I have set up a dynamic dns. When I am outside my home network (physically away or when connected via a vpn), I can connect and sync fine via: https://<server name from dyndns>/<username>/<path to WebDAV folder> However, when I am in my home network, the connection to WebDAV does not work (other connections, AFP, f.ex, do work). What could be some reasons why I can't connect to WebDAV from within my home network? What log files could give hints and where are they stored? I am running OSX server 10.9.3. and server.app. Thanks for your help.

  Read the article

• Sporadic disk clicking sound

  - by Abdó

  Hi, I'm having some unusual and sporadic hard disk clicking issues. Here is a cronological description of the facts. I'm using an ASUS P6T-SE with Intel Core i7, 6Gb RAM 600W Power supply and ATI4670 graphics, running Ubuntu 10.10. About one month ago my hard disk (SATA II Seagate Barracuda 1Tb 7200 rpm) started making a clicking sound: a sort of loud tic-tac, every second or so, when involved in disk activity. The system was clearly slower than before at disk access, but it was functional and I could not find any signal of trouble on the linux logs. I disconnected the disk and tried an older SATA drive I had around: no problem with it. Then I reconnected the Seagate disk, and the problem was mysteriously gone. Ubuntu booted normally, usual speed, no clicking. A couple of weeks later, the problem reappeared. I tried disconnecting reconnecting (as it somehow solved the problem before) without luck. So, despite it was a rather new drive, I assumed it was a hardware issue, made backups and bought a new drive. The new drive is a SATA II Seagate Barracuda 1.5 Tb 7200 rpm. I installed both drives at the same time, with the intention of transferring my files from on to the other. To my surprise, when I booted the computer with both drives, both started making the clicking sound !! Even worse, I removed the old drive, leaving the unformated new drive connected, and booted from a LiveCD. It kept clicking ! Puzzled by this, I tried both drives on my laptop with a SATA to USB cable. At the moment I connected any of them, they made one or two unusual clicks and immediately stopped doing that and worked normally. The old drive I thought almost dead, was working like a charm as if nothing happened. Then I thought: "ok, it must be the motherboard. Let's try again". So, I reconnected the old drive to the ASUS P6T motherboard (the same cables and SATA port as before), and it worked as if nothing happened ! The problem was gone again. The new 1.5 Tb drive was also working ok: No clicking nor slowdown. So I left the old 1Tb disk connected and kept using the computer daily during 3 weeks, until today it happened again. Now I don't really know what to do or check. I'm not even sure if it is a hardware issue any more ! This is rather annoying as it seems it happens with a period of 2 or 3 weeks and I have no means of forcing it to happen. Does anyone have a clue of what can causes this behaviour or have any suggestions of things I should check when it happens again ? What I did today is checking some SMART parameters Error log: smartctl -l error /dev/sda. No errors Short selftest: smartctl -t short /dev/sda. No errors Disk Health check: smartctl -H /dev/sda. passed And here are the vendor specific parameters (smartctl -A /dev/sda) Which I'm not quite sure how to interpret. === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 235962588 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 187 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 16348045 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3590 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 94 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 4295164029 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 057 045 Old_age Always - 30 (Lifetime Min/Max 19/31) 194 Temperature_Celsius 0x0022 030 043 000 Old_age Always - 30 (0 18 0 0) 195 Hardware_ECC_Recovered 0x001a 037 026 000 Old_age Always - 235962588 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 73950746906346 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1832967731 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3294986902 Any clue to this mystery will be really welcome. Thank you very much !!

  Read the article

• FM Transmitter for the Home

  - by greggannicott

  After asking this question regarding piping music through my home I'm looking to buy an FM transmitter. I'd like to connect it to my home pc (ie. into the speaker port), and I'd then control the output with my iPhone (ie. using Apple's Remote software). The problem is, given that almost every FM transmitter is advertised to be used in the car (ie. an iTrip) it's proving very tricky knowing which one would be ideal for the home. First, has anyone tried this? Did it work ok or was there simply to much interference for it work. Secondly, if it did work ok, can anyone recommend a reasonable transmitter? For what I need it seems like an ideal solution, so given that I'm struggling to find information regarding it I'm starting to believe it's not as ideal as it first seems. Thanks in advanance.

  Read the article

• Ubuntu make symbolic link between new folder in Home to existing folder

  - by Fath

  Hello, To the point. I have Ubuntu Maverick running on my Lenovo G450. Before, it was Windows 7. All my data are inside another partition, its NTFS. FSTAB line to mount that partition : /dev/sda5 /data ntfs auto,users,uid=1000,gid=1000,utf8,dmask=027,fmask=137 0 0 Inside /data there are folder Musics, Graphics, Tools, Cores, etc. If I'm about to create new folder, let see, GFX on /home/apronouva/GFX and make it link or pointing to /data/Graphics, how do I do that ? So when I open /home/apronouva/GFX the content will be the same as inside /data/Graphics .. and whatever changes I made inside GFX, it will also affect /data/Graphics I tried : $ ln -s /data/Graphics /home/apronouva/GFX it resulted : error, cannot make symbolic link between folder Thanks in advance, Fath

  Read the article

• Home and End keys in Emacs don't work when run from Tmux

  - by Jan Stolarek

  When I run Emacs from Tmux, the Home and End keys do not work (Home key runs the Search command as if C-s was pressed). The problem started when I added this in my ~/.bashrc file: TERM="xterm" export TERM I've read somewhere that TERM variable should not be set manually but this was the only way I was able to solve problems with colors. Without this setting I got different colors in Emacs when running directly from the terminal and different when running from Tmux. This option caused some of the keys not to work in Emacs when it was run from Tmux, so I added this line to my ~/.tmux.conf: set-window-option -g xterm-keys on This solved problem with all keys except for Home and End. Any ideas how to make these keys work again?

  Read the article

• IE 9 home page is hijacked by avg

  - by horace

  I definitely know how to change the home page in Internet Explorer (Tools -> Options -> General). The problem is, no matter what I put there, it never changes. Stop/restart Internet Explorer and the old home page is back. I did some research to see if there is a registry key that I could tweak to get the home page to set properly. I changed the start page registry key and refreshed the view and the start page key (without even restarting regedit) was reset back to its original value. Now I'm a little concerned. Maybe there's some virus I can't detect on my system? Internet Explorer 9.0.8112.16421 Windows 7 Pro SP 1 x64

  Read the article

• VM's, virtual networks and my home network.

  - by Jason Taylor

  I want to create a small lab of VM's to test out networking with. I have two PC's running VMWare and I need the VM's on these two PC's to be connected to their own LAN. I am planning on bridging the VM's into my home network. My home network and PC's are in the 192.168.0.0 range, but I want my VM's to be in 10.1.0.0. If I do it this way (Bridging the VM's on both hosts into the network) will the VM's be able to communicate? Will my home router freak out seeing two different subnets? Is there another, easier way to connect the virtual lan's on two vmware workstations together?

  Read the article

• Dust prevention for home servers [closed]

  - by Payson Welch

  I found some posts on here about dealing with dust relating to servers but nothing that specifically addressed my question. I have several servers at home for research and as you can probably guess they are not cheap. It is impossible for me to remove 100% of the dust from my home as much as I may try. Does anyone know of any practical solutions to filtering the air that will go into the servers? For instance maybe place some sort of material over the bezel to catch dust particles before they enter? I realize the ideal home solution would be to have a small room with environmental controls but I'm not there yet. Thanks!

  Read the article

• building a home server with a nas appliance [closed]

  - by user51666

  Possible Duplicate: Best way to build home NAS with redundancy I was hoping to get some ideas from folks here. I'm interested in building a home web server with a nas appliance. It would be primarily used for storing pictures, video. I want a networked storage device so I can have multiple devices access it wirelessly as needed from within our home and also I want the option to access from outside the house using a login/pw access. I'm also interested in customizing, building my own web pages as well. Preferably apache. Any preferences? Does anyone have an interesting, neat set up they can share? Thanks!

  Read the article

• Home router for higher network loads

  - by Zizzencs

  I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

  Read the article

• cygwin: ~ != $HOME

  - by user443854

  When I start cygwin, my ~ dir is the same as $HOME. After some time, ~ dir changs, while $HOME stays the same. I am puzzled by this, not sure where to look. Maybe someone experienced this, or has some clue what's going on? When I start: winuser@mybox ~ $ echo $HOME /cygdrive/c/cyguser winuser@mybox ~ $ echo ~ /cygdrive/c/cyguser Later, ~ changes to /cygdrive/c/winuser, which is non-existent. When I restart cygwin, everything is back to normal. What could be causing this?

  Read the article

• Hybrid USB Install Method - netboot and iso

  - by Samus Arin

  I was following the steps here ("Preparing Files for USB Memory Stick Booting") https://help.ubuntu.com/10.04/installation-guide/i386/boot-usb-files.html to create a installation usb drive for 12.1. The very first paragraph of the article states "The second is to also copy a CD image onto the USB stick and use that as a source for packages, possibly in combination with a mirror." However, the only instructions mentioned regarding an iso image is to simply copy one somewhere on the drive (after its been made bootable and syslinux, vmlinuz and initrd.gz installed/copied): "you should now copy an Ubuntu ISO image onto the stick." I thought it strange there where no configuration steps for "pointing" the kernel to the iso (like a line in syslinux.cfg or a boot: option or something), but went ahead with the install anyway. I don't think the iso was used at all, it appeared that all the OS files where downloaded during the install process. Therefore, I was wondering if anyone knew how to use this local iso image in this particular installation technique (I know the image can be installed with dd, but thats a different technique), b/c I need to reinstall (I installed unity, but it's wayy to much for my little Atom based netbook) ? Thank you.

  Read the article

• Raid Shows Up as Multiple Drives - Can't Mount

  - by manyxcxi

  I have a single hard drive that the OS is installed on and I have Sil raid card installed with two matching 500GB hdds set up in Raid 0 and formatted- they're completely empty. For whatever reason they are showing up as /dev/sdb and /dev/sdc and not as a single hard drive. I used fdisk to format both raid drives as Linux raid auto (fd) but I cannot mount either device and dmraid doesn't seem to want to work, what step am I missing? When I installed 9.04 oh so long ago it seems like it recognized and automatically did everything that needed to be done, now I'm stuck. dmraid Output root@tripoli:~# dmraid -r /dev/sdc: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 /dev/sdb: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 root@tripoli:~# dmraid -ay RAID set "sil_biaebhadcfcb" already active fdisk Output root@tripoli:~# fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b9b01 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 60802 488134657 5 Extended /dev/sda5 32 60802 488134656 8e Linux LVM Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6ead5c9a Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 fd Linux raid autodetect Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6e2af28 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 fd Linux raid autodetect

  Read the article

• Is a disk/ata timeout exception dangerous?

  - by j-g-faustus

  I have a few hard drives in mdadm RAID 5 configured to go to standby after a few minutes of inactivity. (Using hdparm.conf spindown_time.) At irregular intervals I get messages like these in dmesg: [ 1840.251661] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1840.251722] ata4.00: failed command: SMART [ 1840.251758] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 1840.251759] res 40/00:14:50:2e:04/00:00:02:00:00/40 Emask 0x4 (timeout) [ 1840.251858] ata4.00: status: { DRDY } [ 1840.251888] ata4: hard resetting link [ 1840.600742] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1840.601521] ata4.00: configured for UDMA/133 [ 1840.601547] ata4: EH complete [337877.713988] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [337877.714019] ata4.00: failed command: SMART [337877.714038] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [337877.714039] res 40/00:04:90:10:81/00:00:00:00:00/40 Emask 0x4 (timeout) [337877.714089] ata4.00: status: { DRDY } [337877.714107] ata4: hard resetting link [337878.063085] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [337878.063743] ata4.00: configured for UDMA/133 [337878.063764] ata4: EH complete I think the exception is caused by smartd when a drive does not wake up quickly enough. There are no issues (that I can tell) in accessing the drives normally through the file system - it takes a few seconds longer than normal when they are asleep, but there are no exceptions. Is this something I should worry about, as a potential symptom on something that could corrupt a drive over time? Or can I safely ignore it as part of normal operation? Edit: By request: smartctl -a for sdaand sde, both disks are members of the array. If ata4is the same as scsi-4 then sde is the one that gave the error above, according to /dev/disk/by-path.

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >