Search Results

Search found 15030 results on 602 pages for 'hp ux 11 23'.

Page 79/602 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

  • Cannot access boot menu with compaq 8510p

    - by pinouchon
    I have a problem with my HP compaq 8510p laptop: when I start it, the fan starts and the power light is on, but the screen displays nothing. When I insert a bootable hard drive, it activates the hard drive light (meaning that the CD is recognized) but it stops after a few seconds. Same thing with any hard drive: the drive is recognized but does not boot. What I've tried so far: Changing the hard drive or booting with no hard drive (same problem) Plugging anoher display via VGA : no display on the other screen Inserting a windows-7 CD (same problem) Booting only on battery, with battery and power cable, only with power cable (same problem) So it looks like something is preventing the laptop from booting and displaying the boot menu. Do you have experienced something similar with a laptop ? What could be wrong ? The laptop is out of warranty. The system used to be windows-7 x64. Edit: I went to the help desk of my university. A guy took a look (he also tried to plug an external screen) and said that the computer is dead: on the HP laptops eventually the GPU card dies and so does the motherboard because they are linked. He saw this many times, and even if I can fix the problem, the laptop would crash again after a while. Do you have similar experience with HP laptops ? (mine is 4 years old) Edit 2: Believe it or not, my laptop is magically working again. I have no clue about what is going on. Now it is like starting and old car: when you turn it on you secretly hope it will actually start... With that said, I expect my laptop to break again in the near future (its an HP after all) and I will accept an answer or add my own accordingly. Edit 3: As expected, the laptop is down again. This time, sometimes when I power it up, it shuts down automatically after 3 seconds, sometimes not at all. In addition, when it does not shut down on its own, the power button does not work : the only way to shut it down is by unplugging the battery. As before, the screen is black, and only the power and battery lights are on. (the other ones: hard drive and wifi are off). I have tried to plug in another power plug, removing the battery and removing the hard drive without success. I might buy another laptop. I've brought the laptop to a repair shop. The problem is indeed that the graphic card is down. It will be replaced by a new one.

    Read the article

  • Solaris 11.1: Changes to included FOSS packages

    - by alanc
    Besides the documentation changes I mentioned last time, another place you can see Solaris 11.1 changes before upgrading is in the online package repository, now that the 11.1 packages have been published to http://pkg.oracle.com/solaris/release/, as the “0.175.1.0.0.24.2” branch. (Oracle Solaris Package Versioning explains what each field in that version string means.) When you’re ready to upgrade to the packages from either this repo, or the support repository, you’ll want to first read How to Update to Oracle Solaris 11.1 Using the Image Packaging System by Pete Dennis, as there are a couple issues you will need to be aware of to do that upgrade, several of which are due to changes in the Free and Open Source Software (FOSS) packages included with Solaris, as I’ll explain in a bit. Solaris 11 can update more readily than Solaris 10 In the Solaris 10 and older update models, the way the updates were built constrained what changes we could make in those releases. To change an existing SVR4 package in those releases, we created a Solaris Patch, which applied to a given version of the SVR4 package and replaced, added or deleted files in it. These patches were released via the support websites (originally SunSolve, now My Oracle Support) for applying to existing Solaris 10 installations, and were also merged into the install images for the next Solaris 10 update release. (This Solaris Patches blog post from Gerry Haskins dives deeper into that subject.) Some of the restrictions of this model were that package refactoring, changes to package dependencies, and even just changing the package version number, were difficult to do in this hybrid patch/OS update model. For instance, when Solaris 10 first shipped, it had the Xorg server from X11R6.8. Over the first couple years of update releases we were able to keep it up to date by replacing, adding, & removing files as necessary, taking it all the way up to Xorg server release 1.3 (new version numbering begun after the X11R7 split of the X11 tree into separate modules gave each module its own version). But if you run pkginfo on the SUNWxorg-server package, you’ll see it still displayed a version number of 6.8, confusing users as to which version was actually included. We stopped upgrading the Xorg server releases in Solaris 10 after 1.3, as later versions added new dependencies, such as HAL, D-Bus, and libpciaccess, which were very difficult to manage in this patching model. (We later got libpciaccess to work, but HAL & D-Bus would have been much harder due to the greater dependency tree underneath those.) Similarly, every time the GNOME team looked into upgrading Solaris 10 past GNOME 2.6, they found these constraints made it so difficult it wasn’t worthwhile, and eventually GNOME’s dependencies had changed enough it was completely infeasible. Fortunately, this worked out for both the X11 & GNOME teams, with our management making the business decision to concentrate on the “Nevada” branch for desktop users - first as Solaris Express Desktop Edition, and later as OpenSolaris, so we didn’t have to fight to try to make the package updates fit into these tight constraints. Meanwhile, the team designing the new packaging system for Solaris 11 was seeing us struggle with these problems, and making this much easier to manage for both the development teams and our users was one of their big goals for the IPS design they were working on. Now that we’ve reached the first update release to Solaris 11, we can start to see the fruits of their labors, with more FOSS updates in 11.1 than we had in many Solaris 10 update releases, keeping software more up to date with the upstream communities. Of course, just because we can more easily update now, doesn’t always mean we should or will do so, it just removes the package system limitations from forcing the decision for us. So while we’ve upgraded the X Window System in the 11.1 release from X11R7.6 to 7.7, the Solaris GNOME team decided it was not the right time to try to make the jump from GNOME 2 to GNOME 3, though they did update some individual components of the desktop, especially those with security fixes like Firefox. In other parts of the system, decisions as to what to update were prioritized based on how they affected other projects, or what customer requests we’d gotten for them. So with all that background in place, what packages did we actually update or add between Solaris 11.0 and 11.1? Core OS Functionality One of the FOSS changes with the biggest impact in this release is the upgrade from Grub Legacy (0.97) to Grub 2 (1.99) for the x64 platform boot loader. This is the cause of one of the upgrade quirks, since to go from Solaris 11.0 to 11.1 on x64 systems, you first need to update the Boot Environment tools (such as beadm) to a new version that can handle boot environments that use the Grub2 boot loader. System administrators can find the details they need to know about the new Grub in the Administering the GRand Unified Bootloader chapter of the Booting and Shutting Down Oracle Solaris 11.1 Systems guide. This change was necessary to be able to support new hardware coming into the x64 marketplace, including systems using UEFI firmware or booting off disk drives larger than 2 terabytes. For both platforms, Solaris 11.1 adds rsyslog as an optional alternative to the traditional syslogd, and OpenSCAP for checking security configuration settings are compliant with site policies. Note that the support repo actually has newer versions of BIND & fetchmail than the 11.1 release, as some late breaking critical fixes came through from the community upstream releases after the Solaris 11.1 release was frozen, and made their way to the support repository. These are responsible for the other big upgrade quirk in this release, in which to upgrade a system which already installed those versions from the support repo, you need to either wait for those packages to make their way to the 11.1 branch of the support repo, or follow the steps in the aforementioned upgrade walkthrough to let the package system know it's okay to temporarily downgrade those. Developer Stack While Solaris 11.0 included Python 2.7, many of the bundled python modules weren’t packaged for it yet, limiting its usability. For 11.1, many more of the python modules include 2.7 versions (enough that I filtered them out of the below table, but you can always search on the package repository server for them. For other language runtimes and development tools, 11.1 expands the use of IPS mediated links to choose which version of a package is the default when the packages are designed to allow multiple versions to install side by side. For instance, in Solaris 11.0, GNU automake 1.9 and 1.10 were provided, and developers had to run them as either automake-1.9 or automake-1.10. In Solaris 11.1, when automake 1.11 was added, also added was a /usr/bin/automake mediated link, which points to the automake-1.11 program by default, but can be changed to another version by running the pkg set-mediator command. Mediated links were also used for the Java runtime & development kits in 11.1, changing the default versions to the Java 7 releases (the 1.7.0.x package versions), while allowing admins to switch links such as /usr/bin/javac back to Java 6 if they need to for their site, to deal with Java 7 compatibility or other issues, without having to update each usage to use the full versioned /usr/jdk/jdk1.6.0_35/bin/javac paths for every invocation. Desktop Stack As I mentioned before, we upgraded from X11R7.6 to X11R7.7, since a pleasant coincidence made the X.Org release dates line up nicely with our feature & code freeze dates for this release. (Or perhaps it wasn’t so coincidental, after all, one of the benefits of being the person making the release is being able to decide what schedule is most convenient for you, and this one worked well for me.) For the table below, I’ve skipped listing the packages in which we use the X11 “katamari” version for the Solaris package version (mainly packages combining elements of multiple upstream modules with independent version numbers), since they just all changed from 7.6 to 7.7. In the graphics drivers, we worked with Intel to update the Intel Integrated Graphics Processor support to support 3D graphics and kernel mode setting on the Ivy Bridge chipsets, and updated Nvidia’s non-FOSS graphics driver from 280.13 to 295.20. Higher up in the desktop stack, PulseAudio was added for audio support, and liblouis for Braille support, and the GNOME applications were built to use them. The Mozilla applications, Firefox & Thunderbird moved to the current Extended Support Release (ESR) versions, 10.x for each, to bring up-to-date security fixes without having to be on Mozilla’s agressive 6 week feature cycle release train. Detailed list of changes This table shows most of the changes to the FOSS packages between Solaris 11.0 and 11.1. As noted above, some were excluded for clarity, or to reduce noise and duplication. All the FOSS packages which didn't change the version number in their packaging info are not included, even if they had updates to fix bugs, security holes, or add support for new hardware or new features of Solaris. Package11.011.1 archiver/unrar 3.8.5 4.1.4 audio/sox 14.3.0 14.3.2 backup/rdiff-backup 1.2.1 1.3.3 communication/im/pidgin 2.10.0 2.10.5 compress/gzip 1.3.5 1.4 compress/xz not included 5.0.1 database/sqlite-3 3.7.6.3 3.7.11 desktop/remote-desktop/tigervnc 1.0.90 1.1.0 desktop/window-manager/xcompmgr 1.1.5 1.1.6 desktop/xscreensaver 5.12 5.15 developer/build/autoconf 2.63 2.68 developer/build/autoconf/xorg-macros 1.15.0 1.17 developer/build/automake-111 not included 1.11.2 developer/build/cmake 2.6.2 2.8.6 developer/build/gnu-make 3.81 3.82 developer/build/imake 1.0.4 1.0.5 developer/build/libtool 1.5.22 2.4.2 developer/build/makedepend 1.0.3 1.0.4 developer/documentation-tool/doxygen 1.5.7.1 1.7.6.1 developer/gnu-binutils 2.19 2.21.1 developer/java/jdepend not included 2.9 developer/java/jdk-6 1.6.0.26 1.6.0.35 developer/java/jdk-7 1.7.0.0 1.7.0.7 developer/java/jpackage-utils not included 1.7.5 developer/java/junit 4.5 4.10 developer/lexer/jflex not included 1.4.1 developer/parser/byaccj not included 1.14 developer/parser/java_cup not included 0.10 developer/quilt 0.47 0.60 developer/versioning/git 1.7.3.2 1.7.9.2 developer/versioning/mercurial 1.8.4 2.2.1 developer/versioning/subversion 1.6.16 1.7.5 diagnostic/constype 1.0.3 1.0.4 diagnostic/nmap 5.21 5.51 diagnostic/scanpci 0.12.1 0.13.1 diagnostic/wireshark 1.4.8 1.8.2 diagnostic/xload 1.1.0 1.1.1 editor/gnu-emacs 23.1 23.4 editor/vim 7.3.254 7.3.600 file/lndir 1.0.2 1.0.3 image/editor/bitmap 1.0.5 1.0.6 image/gnuplot 4.4.0 4.6.0 image/library/libexif 0.6.19 0.6.21 image/library/libpng 1.4.8 1.4.11 image/library/librsvg 2.26.3 2.34.1 image/xcursorgen 1.0.4 1.0.5 library/audio/pulseaudio not included 1.1 library/cacao 2.3.0.0 2.3.1.0 library/expat 2.0.1 2.1.0 library/gc 7.1 7.2 library/graphics/pixman 0.22.0 0.24.4 library/guile 1.8.4 1.8.6 library/java/javadb 10.5.3.0 10.6.2.1 library/java/subversion 1.6.16 1.7.5 library/json-c not included 0.9 library/libedit not included 3.0 library/libee not included 0.3.2 library/libestr not included 0.1.2 library/libevent 1.3.5 1.4.14.2 library/liblouis not included 2.1.1 library/liblouisxml not included 2.1.0 library/libtecla 1.6.0 1.6.1 library/libtool/libltdl 1.5.22 2.4.2 library/nspr 4.8.8 4.8.9 library/openldap 2.4.25 2.4.30 library/pcre 7.8 8.21 library/perl-5/subversion 1.6.16 1.7.5 library/python-2/jsonrpclib not included 0.1.3 library/python-2/lxml 2.1.2 2.3.3 library/python-2/nose not included 1.1.2 library/python-2/pyopenssl not included 0.11 library/python-2/subversion 1.6.16 1.7.5 library/python-2/tkinter-26 2.6.4 2.6.8 library/python-2/tkinter-27 2.7.1 2.7.3 library/security/nss 4.12.10 4.13.1 library/security/openssl 1.0.0.5 (1.0.0e) 1.0.0.10 (1.0.0j) mail/thunderbird 6.0 10.0.6 network/dns/bind 9.6.3.4.3 9.6.3.7.2 package/pkgbuild not included 1.3.104 print/filter/enscript not included 1.6.4 print/filter/gutenprint 5.2.4 5.2.7 print/lp/filter/foomatic-rip 3.0.2 4.0.15 runtime/java/jre-6 1.6.0.26 1.6.0.35 runtime/java/jre-7 1.7.0.0 1.7.0.7 runtime/perl-512 5.12.3 5.12.4 runtime/python-26 2.6.4 2.6.8 runtime/python-27 2.7.1 2.7.3 runtime/ruby-18 1.8.7.334 1.8.7.357 runtime/tcl-8/tcl-sqlite-3 3.7.6.3 3.7.11 security/compliance/openscap not included 0.8.1 security/nss-utilities 4.12.10 4.13.1 security/sudo 1.8.1.2 1.8.4.5 service/network/dhcp/isc-dhcp 4.1 4.1.0.6 service/network/dns/bind 9.6.3.4.3 9.6.3.7.2 service/network/ftp (ProFTPD) 1.3.3.0.5 1.3.3.0.7 service/network/samba 3.5.10 3.6.6 shell/conflict 0.2004.9.1 0.2010.6.27 shell/pipe-viewer 1.1.4 1.2.0 shell/zsh 4.3.12 4.3.17 system/boot/grub 0.97 1.99 system/font/truetype/liberation 1.4 1.7.2 system/library/freetype-2 2.4.6 2.4.9 system/library/libnet 1.1.2.1 1.1.5 system/management/cim/pegasus 2.9.1 2.11.0 system/management/ipmitool 1.8.10 1.8.11 system/management/wbem/wbemcli 1.3.7 1.3.9.1 system/network/routing/quagga 0.99.8 0.99.19 system/rsyslog not included 6.2.0 terminal/luit 1.1.0 1.1.1 text/convmv 1.14 1.15 text/gawk 3.1.5 3.1.8 text/gnu-grep 2.5.4 2.10 web/browser/firefox 6.0.2 10.0.6 web/browser/links 1.0 1.0.3 web/java-servlet/tomcat 6.0.33 6.0.35 web/php-53 not included 5.3.14 web/php-53/extension/php-apc not included 3.1.9 web/php-53/extension/php-idn not included 0.2.0 web/php-53/extension/php-memcache not included 3.0.6 web/php-53/extension/php-mysql not included 5.3.14 web/php-53/extension/php-pear not included 5.3.14 web/php-53/extension/php-suhosin not included 0.9.33 web/php-53/extension/php-tcpwrap not included 1.1.3 web/php-53/extension/php-xdebug not included 2.2.0 web/php-common not included 11.1 web/proxy/squid 3.1.8 3.1.18 web/server/apache-22 2.2.20 2.2.22 web/server/apache-22/module/apache-sed 2.2.20 2.2.22 web/server/apache-22/module/apache-wsgi not included 3.3 x11/diagnostic/xev 1.1.0 1.2.0 x11/diagnostic/xscope 1.3 1.3.1 x11/documentation/xorg-docs 1.6 1.7 x11/keyboard/xkbcomp 1.2.3 1.2.4 x11/library/libdmx 1.1.1 1.1.2 x11/library/libdrm 2.4.25 2.4.32 x11/library/libfontenc 1.1.0 1.1.1 x11/library/libfs 1.0.3 1.0.4 x11/library/libice 1.0.7 1.0.8 x11/library/libsm 1.2.0 1.2.1 x11/library/libx11 1.4.4 1.5.0 x11/library/libxau 1.0.6 1.0.7 x11/library/libxcb 1.7 1.8.1 x11/library/libxcursor 1.1.12 1.1.13 x11/library/libxdmcp 1.1.0 1.1.1 x11/library/libxext 1.3.0 1.3.1 x11/library/libxfixes 4.0.5 5.0 x11/library/libxfont 1.4.4 1.4.5 x11/library/libxft 2.2.0 2.3.1 x11/library/libxi 1.4.3 1.6.1 x11/library/libxinerama 1.1.1 1.1.2 x11/library/libxkbfile 1.0.7 1.0.8 x11/library/libxmu 1.1.0 1.1.1 x11/library/libxmuu 1.1.0 1.1.1 x11/library/libxpm 3.5.9 3.5.10 x11/library/libxrender 0.9.6 0.9.7 x11/library/libxres 1.0.5 1.0.6 x11/library/libxscrnsaver 1.2.1 1.2.2 x11/library/libxtst 1.2.0 1.2.1 x11/library/libxv 1.0.6 1.0.7 x11/library/libxvmc 1.0.6 1.0.7 x11/library/libxxf86vm 1.1.1 1.1.2 x11/library/mesa 7.10.2 7.11.2 x11/library/toolkit/libxaw7 1.0.9 1.0.11 x11/library/toolkit/libxt 1.0.9 1.1.3 x11/library/xtrans 1.2.6 1.2.7 x11/oclock 1.0.2 1.0.3 x11/server/xdmx 1.10.3 1.12.2 x11/server/xephyr 1.10.3 1.12.2 x11/server/xorg 1.10.3 1.12.2 x11/server/xorg/driver/xorg-input-keyboard 1.6.0 1.6.1 x11/server/xorg/driver/xorg-input-mouse 1.7.1 1.7.2 x11/server/xorg/driver/xorg-input-synaptics 1.4.1 1.6.2 x11/server/xorg/driver/xorg-input-vmmouse 12.7.0 12.8.0 x11/server/xorg/driver/xorg-video-ast 0.91.10 0.93.10 x11/server/xorg/driver/xorg-video-ati 6.14.1 6.14.4 x11/server/xorg/driver/xorg-video-cirrus 1.3.2 1.4.0 x11/server/xorg/driver/xorg-video-dummy 0.3.4 0.3.5 x11/server/xorg/driver/xorg-video-intel 2.10.0 2.18.0 x11/server/xorg/driver/xorg-video-mach64 6.9.0 6.9.1 x11/server/xorg/driver/xorg-video-mga 1.4.13 1.5.0 x11/server/xorg/driver/xorg-video-openchrome 0.2.904 0.2.905 x11/server/xorg/driver/xorg-video-r128 6.8.1 6.8.2 x11/server/xorg/driver/xorg-video-trident 1.3.4 1.3.5 x11/server/xorg/driver/xorg-video-vesa 2.3.0 2.3.1 x11/server/xorg/driver/xorg-video-vmware 11.0.3 12.0.2 x11/server/xserver-common 1.10.3 1.12.2 x11/server/xvfb 1.10.3 1.12.2 x11/server/xvnc 1.0.90 1.1.0 x11/session/sessreg 1.0.6 1.0.7 x11/session/xauth 1.0.6 1.0.7 x11/session/xinit 1.3.1 1.3.2 x11/transset 0.9.1 1.0.0 x11/trusted/trusted-xorg 1.10.3 1.12.2 x11/x11-window-dump 1.0.4 1.0.5 x11/xclipboard 1.1.1 1.1.2 x11/xclock 1.0.5 1.0.6 x11/xfd 1.1.0 1.1.1 x11/xfontsel 1.0.3 1.0.4 x11/xfs 1.1.1 1.1.2 P.S. To get the version numbers for this table, I ran a quick perl script over the output from: % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected].11,5.11-0.175.1.0.0.24` \ | sort /tmp/11.1 % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected].11,5.11-0.175.0.0.0.2` \ | sort /tmp/11.0

    Read the article

  • Varnish POST problem "9 FetchError c backend write error: 11" for application/x-www-form-urlencoded content

    - by ompap
    Cutting a longish story short, we have managed to get a more precise error out of Varnishlog. Varnishlog tells us that we are sending a 31 TxRequest - POST 31 TxHeader - Content-Type: application/x-www-form-urlencoded but we are getting 9 FetchError c backend write error: 11 31 BackendClose - [backend name] 9 VCL_call c error 9 VCL_return c deliver 9 Length c 488 9 VCL_call c deliver 9 VCL_return c deliver 9 TxProtocol c HTTP/1.1 9 TxStatus c 503 We still do not know what this is exactly, but apparently Content-Type: application/x-www-form-urlencoded is not getting through as it should. Help still needed, please! Original message below. The title was "Varnish not letting Joomla users to log in - 503 guru meditation error", but I changed it to get more attention to the problem and not to the symptoms. Hello, We have a production site for a local newspaper which is currently behind an Apache reverse proxy, basicly the site on one server and the other being reserved as a reverse proxy only (well, there is more but that has no relevance here). Apache as a reverse proxy works, but could be faster. We want to change the reverse proxy to use Varnish instead of Apache on an Ubuntu 10.4 Server. The Varnish is version 2.10 installed directly from Ubuntu repos. Ubuntu 10.4 uses PHP 5.3.2. For anonymous surfers the site works wonderfully with Varnish. So far we can get very good speed out of Varnish, we just have a few problems with logging in or out. The big one is, that the users cannot log in: they get a Varnish 503 error page every time. The logs do not reveal the cause. It feels as if the request would never leave Varnish. So we are merely guessing - not a strong starting point. We have gone through what has been suggested on various plces on the web. We have increased the timeouts to backend xxx { .host = "xxx.xx"; .port = "http"; .connect_timeout = 60s; .first_byte_timeout = 60s; .between_bytes_timeout = 60s; } but we seem to get the 503 guru error page much faster than that, as in approx. 5 seconds. We have increased the Varnish headers size to 128 in daemon. In vcl_recv we have if (req.http.Authenticate || req.http.Authorization) { return(pass); } and in vcl_fetch ## auhtentication handling if (req.http.Authenticate || req.http.Authorization) { return(pass); } We do not strip cookies. We have tried to make sure that error pages are not cached. As said above, we cannot see anything in the backend Apache logs, apparently it never gets asked for Joomla user authentication. Varnish does not seem to get much mentioning with connection to Joomla. (We cannot dump Joomla, that selection has been done and we just have to live with what we have been given) Has anyone a working Varnish - Joomla combination? Thanks for reading. Please help. We need some hints - desperately. Any suggestions? ompap

    Read the article

  • MySQL crash. Unknown cause. Signal 11

    - by fortmac
    This is a database that I installed ~6 months ago and had been running fine. This is currently running in Ubuntu 12.04. Attempting to connect to MySQL causes this error: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) Then theres: $ sudo mysqld which returns: 130702 15:38:54 [Note] Plugin 'FEDERATED' is disabled. 130702 15:38:54 InnoDB: The InnoDB memory heap is disabled 130702 15:38:54 InnoDB: Mutexes and rw_locks use GCC atomic builtins 130702 15:38:54 InnoDB: Compressed tables use zlib 1.2.3.4 130702 15:38:54 InnoDB: Initializing buffer pool, size = 128.0M 130702 15:38:54 InnoDB: Completed initialization of buffer pool 130702 15:38:54 InnoDB: highest supported file format is Barracuda. InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 130702 15:38:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 130702 15:38:55 InnoDB: Waiting for the background threads to start 130702 15:38:56 InnoDB: 1.1.8 started; log sequence number 5201901917 130702 15:38:56 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 130702 15:38:56 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 130702 15:38:56 [Note] Server socket created on IP: '127.0.0.1'. 130702 15:38:56 [Note] Event Scheduler: Loaded 0 events 130702 15:38:56 [Note] mysqld: ready for connections. Version: '5.5.28-0ubuntu0.12.04.3' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 19:39:02 UTC - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=151 thread_count=1 connection_count=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 346681 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x7f9509e51530 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f94f1d3de60 thread_stack 0x30000 mysqld(my_print_stacktrace+0x29)[0x7f95083427b9] mysqld(handle_fatal_signal+0x483)[0x7f9508209b43] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f9506f5bcb0] mysqld(+0x320e1c)[0x7f9508113e1c] mysqld(_ZN4JOIN15alloc_func_listEv+0x9c)[0x7f950812391c] mysqld(_ZN4JOIN7prepareEPPP4ItemP10TABLE_LISTjS1_jP8st_orderS7_S1_S7_P13st_select_lexP18st_select_lex_unit+0x918)[0x7f9508124658] mysqld(_Z12mysql_selectP3THDPPP4ItemP10TABLE_LISTjR4ListIS1_ES2_jP8st_orderSB_S2_SB_yP13select_resultP18st_select_lex_unitP13st_select_lex+0x130)[0x7f950812d060] mysqld(_Z13handle_selectP3THDP3LEXP13select_resultm+0x17c)[0x7f9508132fbc] mysqld(+0x2f6714)[0x7f95080e9714] mysqld(_Z21mysql_execute_commandP3THD+0x16d8)[0x7f95080f1178] mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x10f)[0x7f95080f5e0f] mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1380)[0x7f95080f7260] mysqld(_Z24do_handle_one_connectionP3THD+0x1bd)[0x7f950819b80d] mysqld(handle_one_connection+0x50)[0x7f950819b870] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f9506f53e9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f9506684cbd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f94e0004b80): is an invalid pointer Connection ID (thread ID): 1 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. I'm at a loss. What other reports would be useful in diagnosing this? /var/log/mysql.err & /var/log/mysql.log are empty.

    Read the article

  • Crystal reports 11 RDC (COM API) displays printer dialog even when I tell it not to prompt

    - by bdonlan
    I'm using Crystal Reports 11's RDC (COM) API to print. My code looks like this: HRESULT res = m_Report->SelectPrinter(b_driver, b_device, b_port); if (FAILED(res)) return res; // For these calls, the #import wrapper throws on error m_Report->PutPrinterDuplex(dmDuplex); m_Report->PutPaperSize(dmPaperSize); m_Report->PutPaperSource((CRPaperSource)pdlg->GetDevMode()->dmDefaultSource); if (m_Report->GetPaperOrientation() == crDefaultPaperOrientation) m_Report->PutPaperOrientation(crPortrait); VARIANT vfalse; VariantInit(&vfalse); vfalse.vt=VT_BOOL; vfalse.boolVal=0; res = m_Report->PrintOut(vfalse); However, at the end of all this, crystal reports still shows its own printer selection dialog - but only for some reports, it seems. Why does crystal reports show a print dialog even when I pass false for promptUser? And how, then, can I suppress crystal reports' internal printer selection dialog and force it to use my values? Edit: Whoops, CR11, not CR9. Some further information: The reports that work properly (ie, do not show the print dialog) are generated internally using the RDC API; we create a new report object, import subreports into it, then print the result. No problem there. The reports that do not work properly (ie, force the print dialog to open) have been created with a previous version of crystal reports; however, opening and saving the report does not seem to help. Sample reports in the Crystal Reports installation directory show the same problem. I tried reproducing with VBScript; however, the result was that nothing was printed at all (no dialog, no nothing): Set app = CreateObject("CrystalRuntime.Application.11") Set report = app.OpenReport("C:\Program Files\Business Objects\Crystal Reports 11.5\Samples\en\Reports\General Business\Inventory Crosstab.rpt") report.PrintOut(True) rem Testing with a True parameter to force a print dialog - but no printout and nothing appears (no error either though)

    Read the article

  • How to subscribe to the free Oracle Linux errata yum repositories

    - by Lenz Grimmer
    Now that updates and errata for Oracle Linux are available for free (both as in beer and freedom), here's a quick HOWTO on how to subscribe your Oracle Linux system to the newly added yum repositories on our public yum server, assuming that you just installed Oracle Linux from scratch, e.g. by using the installation media (ISO images) available from the Oracle Software Delivery Cloud You need to download the appropriate yum repository configuration file from the public yum server and install it in the yum repository directory. For Oracle Linux 6, the process would look as follows: as the root user, run the following command: [root@oraclelinux62 ~]# wget http://public-yum.oracle.com/public-yum-ol6.repo \ -P /etc/yum.repos.d/ --2012-03-23 00:18:25-- http://public-yum.oracle.com/public-yum-ol6.repo Resolving public-yum.oracle.com... 141.146.44.34 Connecting to public-yum.oracle.com|141.146.44.34|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1461 (1.4K) [text/plain] Saving to: “/etc/yum.repos.d/public-yum-ol6.repo” 100%[=================================================>] 1,461 --.-K/s in 0s 2012-03-23 00:18:26 (37.1 MB/s) - “/etc/yum.repos.d/public-yum-ol6.repo” saved [1461/1461] For Oracle Linux 5, the file name would be public-yum-ol5.repo in the URL above instead. The "_latest" repositories that contain the errata packages are already enabled by default — you can simply pull in all available updates by running "yum update" next: [root@oraclelinux62 ~]# yum update Loaded plugins: refresh-packagekit, security ol6_latest | 1.1 kB 00:00 ol6_latest/primary | 15 MB 00:42 ol6_latest 14643/14643 Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package at.x86_64 0:3.1.10-43.el6 will be updated ---> Package at.x86_64 0:3.1.10-43.el6_2.1 will be an update ---> Package autofs.x86_64 1:5.0.5-39.el6 will be updated ---> Package autofs.x86_64 1:5.0.5-39.el6_2.1 will be an update ---> Package bind-libs.x86_64 32:9.7.3-8.P3.el6 will be updated ---> Package bind-libs.x86_64 32:9.7.3-8.P3.el6_2.2 will be an update ---> Package bind-utils.x86_64 32:9.7.3-8.P3.el6 will be updated ---> Package bind-utils.x86_64 32:9.7.3-8.P3.el6_2.2 will be an update ---> Package cvs.x86_64 0:1.11.23-11.el6_0.1 will be updated ---> Package cvs.x86_64 0:1.11.23-11.el6_2.1 will be an update [...] ---> Package yum.noarch 0:3.2.29-22.0.1.el6 will be updated ---> Package yum.noarch 0:3.2.29-22.0.2.el6_2.2 will be an update ---> Package yum-plugin-security.noarch 0:1.1.30-10.el6 will be updated ---> Package yum-plugin-security.noarch 0:1.1.30-10.0.1.el6 will be an update ---> Package yum-utils.noarch 0:1.1.30-10.el6 will be updated ---> Package yum-utils.noarch 0:1.1.30-10.0.1.el6 will be an update --> Finished Dependency Resolution Dependencies Resolved ===================================================================================== Package Arch Version Repository Size ===================================================================================== Installing: kernel x86_64 2.6.32-220.7.1.el6 ol6_latest 24 M kernel-uek x86_64 2.6.32-300.11.1.el6uek ol6_latest 21 M kernel-uek-devel x86_64 2.6.32-300.11.1.el6uek ol6_latest 6.3 M Updating: at x86_64 3.1.10-43.el6_2.1 ol6_latest 60 k autofs x86_64 1:5.0.5-39.el6_2.1 ol6_latest 470 k bind-libs x86_64 32:9.7.3-8.P3.el6_2.2 ol6_latest 839 k bind-utils x86_64 32:9.7.3-8.P3.el6_2.2 ol6_latest 178 k cvs x86_64 1.11.23-11.el6_2.1 ol6_latest 711 k [...] xulrunner x86_64 10.0.3-1.0.1.el6_2 ol6_latest 12 M yelp x86_64 2.28.1-13.el6_2 ol6_latest 778 k yum noarch 3.2.29-22.0.2.el6_2.2 ol6_latest 987 k yum-plugin-security noarch 1.1.30-10.0.1.el6 ol6_latest 36 k yum-utils noarch 1.1.30-10.0.1.el6 ol6_latest 94 k Transaction Summary ===================================================================================== Install 3 Package(s) Upgrade 96 Package(s) Total download size: 173 M Is this ok [y/N]: y Downloading Packages: (1/99): at-3.1.10-43.el6_2.1.x86_64.rpm | 60 kB 00:00 (2/99): autofs-5.0.5-39.el6_2.1.x86_64.rpm | 470 kB 00:01 (3/99): bind-libs-9.7.3-8.P3.el6_2.2.x86_64.rpm | 839 kB 00:02 (4/99): bind-utils-9.7.3-8.P3.el6_2.2.x86_64.rpm | 178 kB 00:00 [...] (96/99): yelp-2.28.1-13.el6_2.x86_64.rpm | 778 kB 00:02 (97/99): yum-3.2.29-22.0.2.el6_2.2.noarch.rpm | 987 kB 00:03 (98/99): yum-plugin-security-1.1.30-10.0.1.el6.noarch.rpm | 36 kB 00:00 (99/99): yum-utils-1.1.30-10.0.1.el6.noarch.rpm | 94 kB 00:00 ------------------------------------------------------------------------------------- Total 306 kB/s | 173 MB 09:38 warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY Retrieving key from http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 Importing GPG key 0xEC551F03: Userid: "Oracle OSS group (Open Source Software group) " From : http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 Is this ok [y/N]: y Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Updating : yum-3.2.29-22.0.2.el6_2.2.noarch 1/195 Updating : xorg-x11-server-common-1.10.4-6.el6_2.3.x86_64 2/195 Updating : kernel-uek-headers-2.6.32-300.11.1.el6uek.x86_64 3/195 Updating : 12:dhcp-common-4.1.1-25.P1.el6_2.1.x86_64 4/195 Updating : tzdata-java-2011n-2.el6.noarch 5/195 Updating : tzdata-2011n-2.el6.noarch 6/195 Updating : glibc-common-2.12-1.47.el6_2.9.x86_64 7/195 Updating : glibc-2.12-1.47.el6_2.9.x86_64 8/195 [...] Cleanup : kernel-firmware-2.6.32-220.el6.noarch 191/195 Cleanup : kernel-uek-firmware-2.6.32-300.3.1.el6uek.noarch 192/195 Cleanup : glibc-common-2.12-1.47.el6.x86_64 193/195 Cleanup : glibc-2.12-1.47.el6.x86_64 194/195 Cleanup : tzdata-2011l-4.el6.noarch 195/195 Installed: kernel.x86_64 0:2.6.32-220.7.1.el6 kernel-uek.x86_64 0:2.6.32-300.11.1.el6uek kernel-uek-devel.x86_64 0:2.6.32-300.11.1.el6uek Updated: at.x86_64 0:3.1.10-43.el6_2.1 autofs.x86_64 1:5.0.5-39.el6_2.1 bind-libs.x86_64 32:9.7.3-8.P3.el6_2.2 bind-utils.x86_64 32:9.7.3-8.P3.el6_2.2 cvs.x86_64 0:1.11.23-11.el6_2.1 dhclient.x86_64 12:4.1.1-25.P1.el6_2.1 [...] xorg-x11-server-common.x86_64 0:1.10.4-6.el6_2.3 xulrunner.x86_64 0:10.0.3-1.0.1.el6_2 yelp.x86_64 0:2.28.1-13.el6_2 yum.noarch 0:3.2.29-22.0.2.el6_2.2 yum-plugin-security.noarch 0:1.1.30-10.0.1.el6 yum-utils.noarch 0:1.1.30-10.0.1.el6 Complete! At this point, your system is fully up to date. As the kernel was updated as well, a reboot is the recommended next action. If you want to install the latest release of the Unbreakable Enterprise Kernel Release 2 as well, you need to edit the .repo file and enable the respective yum repository (e.g. "ol6_UEK_latest" for Oracle Linux 6 and "ol5_UEK_latest" for Oracle Linux 5) manually, by setting enabled to "1". The next yum update run will download and install the second release of the Unbreakable Enterprise Kernel, which will be enabled after the next reboot. -Lenz

    Read the article

  • Solaris X86 AESNI OpenSSL Engine

    - by danx
    Solaris X86 AESNI OpenSSL Engine Cryptography is a major component of secure e-commerce. Since cryptography is compute intensive and adds a significant load to applications, such as SSL web servers (https), crypto performance is an important factor. Providing accelerated crypto hardware greatly helps these applications and will help lead to a wider adoption of cryptography, and lower cost, in e-commerce and other applications. The Intel Westmere microprocessor has six new instructions to acclerate AES encryption. They are called "AESNI" for "AES New Instructions". These are unprivileged instructions, so no "root", other elevated access, or context switch is required to execute these instructions. These instructions are used in a new built-in OpenSSL 1.0 engine available in Solaris 11, the aesni engine. Previous Work Previously, AESNI instructions were introduced into the Solaris x86 kernel and libraries. That is, the "aes" kernel module (used by IPsec and other kernel modules) and the Solaris pkcs11 library (for user applications). These are available in Solaris 10 10/09 (update 8) and above, and Solaris 11. The work here is to add the aesni engine to OpenSSL. X86 AESNI Instructions Intel's Xeon 5600 is one of the processors that support AESNI. This processor is used in the Sun Fire X4170 M2 As mentioned above, six new instructions acclerate AES encryption in processor silicon. The new instructions are: aesenc performs one round of AES encryption. One encryption round is composed of these steps: substitute bytes, shift rows, mix columns, and xor the round key. aesenclast performs the final encryption round, which is the same as above, except omitting the mix columns (which is only needed for the next encryption round). aesdec performs one round of AES decryption aesdeclast performs the final AES decryption round aeskeygenassist Helps expand the user-provided key into a "key schedule" of keys, one per round aesimc performs an "inverse mixed columns" operation to convert the encryption key schedule into a decryption key schedule pclmulqdq Not a AESNI instruction, but performs "carryless multiply" operations to acclerate AES GCM mode. Since the AESNI instructions are implemented in hardware, they take a constant number of cycles and are not vulnerable to side-channel timing attacks that attempt to discern some bits of data from the time taken to encrypt or decrypt the data. Solaris x86 and OpenSSL Software Optimizations Having X86 AESNI hardware crypto instructions is all well and good, but how do we access it? The software is available with Solaris 11 and is used automatically if you are running Solaris x86 on a AESNI-capable processor. AESNI is used internally in the kernel through kernel crypto modules and is available in user space through the PKCS#11 library. For OpenSSL on Solaris 11, AESNI crypto is available directly with a new built-in OpenSSL 1.0 engine, called the "aesni engine." This is in lieu of the extra overhead of going through the Solaris OpenSSL pkcs11 engine, which accesses Solaris crypto and digest operations. Instead, AESNI assembly is included directly in the new aesni engine. Instead of including the aesni engine in a separate library in /lib/openssl/engines/, the aesni engine is "built-in", meaning it is included directly in OpenSSL's libcrypto.so.1.0.0 library. This reduces overhead and the need to manually specify the aesni engine. Since the engine is built-in (that is, in libcrypto.so.1.0.0), the openssl -engine command line flag or API call is not needed to access the engine—the aesni engine is used automatically on AESNI hardware. Ciphers and Digests supported by OpenSSL aesni engine The Openssl aesni engine auto-detects if it's running on AESNI hardware and uses AESNI encryption instructions for these ciphers: AES-128-CBC, AES-192-CBC, AES-256-CBC, AES-128-CFB128, AES-192-CFB128, AES-256-CFB128, AES-128-CTR, AES-192-CTR, AES-256-CTR, AES-128-ECB, AES-192-ECB, AES-256-ECB, AES-128-OFB, AES-192-OFB, and AES-256-OFB. Implementation of the OpenSSL aesni engine The AESNI assembly language routines are not a part of the regular Openssl 1.0.0 release. AESNI is a part of the "HEAD" ("development" or "unstable") branch of OpenSSL, for future release. But AESNI is also available as a separate patch provided by Intel to the OpenSSL project for OpenSSL 1.0.0. A minimal amount of "glue" code in the aesni engine works between the OpenSSL libcrypto.so.1.0.0 library and the assembly functions. The aesni engine code is separate from the base OpenSSL code and requires patching only a few source files to use it. That means OpenSSL can be more easily updated to future versions without losing the performance from the built-in aesni engine. OpenSSL aesni engine Performance Here's some graphs of aesni engine performance I measured by running openssl speed -evp $algorithm where $algorithm is aes-128-cbc, aes-192-cbc, and aes-256-cbc. These are using the 64-bit version of openssl on the same AESNI hardware, a Sun Fire X4170 M2 with a Intel Xeon E5620 @2.40GHz, running Solaris 11 FCS. "Before" is openssl without the aesni engine and "after" is openssl with the aesni engine. The numbers are MBytes/second. OpenSSL aesni engine performance on Sun Fire X4170 M2 (Xeon E5620 @2.40GHz) (Higher is better; "before"=OpenSSL on AESNI without AESNI engine software, "after"=OpenSSL AESNI engine) As you can see the speedup is dramatic for all 3 key lengths and for data sizes from 16 bytes to 8 Kbytes—AESNI is about 7.5-8x faster over hand-coded amd64 assembly (without aesni instructions). Verifying the OpenSSL aesni engine is present The easiest way to determine if you are running the aesni engine is to type "openssl engine" on the command line. No configuration, API, or command line options are needed to use the OpenSSL aesni engine. If you are running on Intel AESNI hardware with Solaris 11 FCS, you'll see this output indicating you are using the aesni engine: intel-westmere $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support If you are running on Intel without AESNI hardware you'll see this output indicating the hardware can't support the aesni engine: intel-nehalem $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support For Solaris on SPARC or older Solaris OpenSSL software, you won't see any aesni engine line at all. Third-party OpenSSL software (built yourself or from outside Oracle) will not have the aesni engine either. Solaris 11 FCS comes with OpenSSL version 1.0.0e. The output of typing "openssl version" should be "OpenSSL 1.0.0e 6 Sep 2011". 64- and 32-bit OpenSSL OpenSSL comes in both 32- and 64-bit binaries. 64-bit executable is now the default, at /usr/bin/openssl, and OpenSSL 64-bit libraries at /lib/amd64/libcrypto.so.1.0.0 and libssl.so.1.0.0 The 32-bit executable is at /usr/bin/i86/openssl and the libraries are at /lib/libcrytpo.so.1.0.0 and libssl.so.1.0.0. Availability The OpenSSL AESNI engine is available in Solaris 11 x86 for both the 64- and 32-bit versions of OpenSSL. It is not available with Solaris 10. You must have a processor that supports AESNI instructions, otherwise OpenSSL will fallback to the older, slower AES implementation without AESNI. Processors that support AESNI include most Westmere and Sandy Bridge class processor architectures. Some low-end processors (such as for mobile/laptop platforms) do not support AESNI. The easiest way to determine if the processor supports AESNI is with the isainfo -v command—look for "amd64" and "aes" in the output: $ isainfo -v 64-bit amd64 applications pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu Conclusion The Solaris 11 OpenSSL aesni engine provides easy access to powerful Intel AESNI hardware cryptography, in addition to Solaris userland PKCS#11 libraries and Solaris crypto kernel modules.

    Read the article

  • Solaris X86 AESNI OpenSSL Engine

    - by danx
    Solaris X86 AESNI OpenSSL Engine Cryptography is a major component of secure e-commerce. Since cryptography is compute intensive and adds a significant load to applications, such as SSL web servers (https), crypto performance is an important factor. Providing accelerated crypto hardware greatly helps these applications and will help lead to a wider adoption of cryptography, and lower cost, in e-commerce and other applications. The Intel Westmere microprocessor has six new instructions to acclerate AES encryption. They are called "AESNI" for "AES New Instructions". These are unprivileged instructions, so no "root", other elevated access, or context switch is required to execute these instructions. These instructions are used in a new built-in OpenSSL 1.0 engine available in Solaris 11, the aesni engine. Previous Work Previously, AESNI instructions were introduced into the Solaris x86 kernel and libraries. That is, the "aes" kernel module (used by IPsec and other kernel modules) and the Solaris pkcs11 library (for user applications). These are available in Solaris 10 10/09 (update 8) and above, and Solaris 11. The work here is to add the aesni engine to OpenSSL. X86 AESNI Instructions Intel's Xeon 5600 is one of the processors that support AESNI. This processor is used in the Sun Fire X4170 M2 As mentioned above, six new instructions acclerate AES encryption in processor silicon. The new instructions are: aesenc performs one round of AES encryption. One encryption round is composed of these steps: substitute bytes, shift rows, mix columns, and xor the round key. aesenclast performs the final encryption round, which is the same as above, except omitting the mix columns (which is only needed for the next encryption round). aesdec performs one round of AES decryption aesdeclast performs the final AES decryption round aeskeygenassist Helps expand the user-provided key into a "key schedule" of keys, one per round aesimc performs an "inverse mixed columns" operation to convert the encryption key schedule into a decryption key schedule pclmulqdq Not a AESNI instruction, but performs "carryless multiply" operations to acclerate AES GCM mode. Since the AESNI instructions are implemented in hardware, they take a constant number of cycles and are not vulnerable to side-channel timing attacks that attempt to discern some bits of data from the time taken to encrypt or decrypt the data. Solaris x86 and OpenSSL Software Optimizations Having X86 AESNI hardware crypto instructions is all well and good, but how do we access it? The software is available with Solaris 11 and is used automatically if you are running Solaris x86 on a AESNI-capable processor. AESNI is used internally in the kernel through kernel crypto modules and is available in user space through the PKCS#11 library. For OpenSSL on Solaris 11, AESNI crypto is available directly with a new built-in OpenSSL 1.0 engine, called the "aesni engine." This is in lieu of the extra overhead of going through the Solaris OpenSSL pkcs11 engine, which accesses Solaris crypto and digest operations. Instead, AESNI assembly is included directly in the new aesni engine. Instead of including the aesni engine in a separate library in /lib/openssl/engines/, the aesni engine is "built-in", meaning it is included directly in OpenSSL's libcrypto.so.1.0.0 library. This reduces overhead and the need to manually specify the aesni engine. Since the engine is built-in (that is, in libcrypto.so.1.0.0), the openssl -engine command line flag or API call is not needed to access the engine—the aesni engine is used automatically on AESNI hardware. Ciphers and Digests supported by OpenSSL aesni engine The Openssl aesni engine auto-detects if it's running on AESNI hardware and uses AESNI encryption instructions for these ciphers: AES-128-CBC, AES-192-CBC, AES-256-CBC, AES-128-CFB128, AES-192-CFB128, AES-256-CFB128, AES-128-CTR, AES-192-CTR, AES-256-CTR, AES-128-ECB, AES-192-ECB, AES-256-ECB, AES-128-OFB, AES-192-OFB, and AES-256-OFB. Implementation of the OpenSSL aesni engine The AESNI assembly language routines are not a part of the regular Openssl 1.0.0 release. AESNI is a part of the "HEAD" ("development" or "unstable") branch of OpenSSL, for future release. But AESNI is also available as a separate patch provided by Intel to the OpenSSL project for OpenSSL 1.0.0. A minimal amount of "glue" code in the aesni engine works between the OpenSSL libcrypto.so.1.0.0 library and the assembly functions. The aesni engine code is separate from the base OpenSSL code and requires patching only a few source files to use it. That means OpenSSL can be more easily updated to future versions without losing the performance from the built-in aesni engine. OpenSSL aesni engine Performance Here's some graphs of aesni engine performance I measured by running openssl speed -evp $algorithm where $algorithm is aes-128-cbc, aes-192-cbc, and aes-256-cbc. These are using the 64-bit version of openssl on the same AESNI hardware, a Sun Fire X4170 M2 with a Intel Xeon E5620 @2.40GHz, running Solaris 11 FCS. "Before" is openssl without the aesni engine and "after" is openssl with the aesni engine. The numbers are MBytes/second. OpenSSL aesni engine performance on Sun Fire X4170 M2 (Xeon E5620 @2.40GHz) (Higher is better; "before"=OpenSSL on AESNI without AESNI engine software, "after"=OpenSSL AESNI engine) As you can see the speedup is dramatic for all 3 key lengths and for data sizes from 16 bytes to 8 Kbytes—AESNI is about 7.5-8x faster over hand-coded amd64 assembly (without aesni instructions). Verifying the OpenSSL aesni engine is present The easiest way to determine if you are running the aesni engine is to type "openssl engine" on the command line. No configuration, API, or command line options are needed to use the OpenSSL aesni engine. If you are running on Intel AESNI hardware with Solaris 11 FCS, you'll see this output indicating you are using the aesni engine: intel-westmere $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support If you are running on Intel without AESNI hardware you'll see this output indicating the hardware can't support the aesni engine: intel-nehalem $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support For Solaris on SPARC or older Solaris OpenSSL software, you won't see any aesni engine line at all. Third-party OpenSSL software (built yourself or from outside Oracle) will not have the aesni engine either. Solaris 11 FCS comes with OpenSSL version 1.0.0e. The output of typing "openssl version" should be "OpenSSL 1.0.0e 6 Sep 2011". 64- and 32-bit OpenSSL OpenSSL comes in both 32- and 64-bit binaries. 64-bit executable is now the default, at /usr/bin/openssl, and OpenSSL 64-bit libraries at /lib/amd64/libcrypto.so.1.0.0 and libssl.so.1.0.0 The 32-bit executable is at /usr/bin/i86/openssl and the libraries are at /lib/libcrytpo.so.1.0.0 and libssl.so.1.0.0. Availability The OpenSSL AESNI engine is available in Solaris 11 x86 for both the 64- and 32-bit versions of OpenSSL. It is not available with Solaris 10. You must have a processor that supports AESNI instructions, otherwise OpenSSL will fallback to the older, slower AES implementation without AESNI. Processors that support AESNI include most Westmere and Sandy Bridge class processor architectures. Some low-end processors (such as for mobile/laptop platforms) do not support AESNI. The easiest way to determine if the processor supports AESNI is with the isainfo -v command—look for "amd64" and "aes" in the output: $ isainfo -v 64-bit amd64 applications pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu Conclusion The Solaris 11 OpenSSL aesni engine provides easy access to powerful Intel AESNI hardware cryptography, in addition to Solaris userland PKCS#11 libraries and Solaris crypto kernel modules.

    Read the article

  • Bad disk performance on HP DL360 with Smarty Array P400i RAID controller

    - by sarge
    I have a HP DL360 server with 4x 146GB SAS disks and a Smart Array P400i RAID controller with 256MB cache. The disks are in RAID 5 (3 disks + 1 hot spare). The server is running VMware ESX 3i. The disk write performance is really bad. Here are some numbers: ns1:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 3364 MB in 2.00 seconds = 1685.69 MB/sec Timing buffered disk reads: 18 MB in 3.79 seconds = 4.75 MB/sec ns1:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 282.307 s, 3.6 MB/s real 4m52.003s user 0m2.160s sys 3m10.796s Compared to another server those number are terrible: Dell R200, 2x 500GB SATA disks, PERC raid controller (disks are mirrored). web4:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 6584 MB in 2.00 seconds = 3297.79 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.79 MB/sec web4:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 35.2919 s, 29.0 MB/s real 0m36.570s user 0m0.476s sys 0m32.298s The server isn't very loaded and the VMware Infrastructure Client performance monitor is showing 550KBps average read and 1208KBps average write for the last 30 minutes (highest write rate: 6.6MBps). This has been a problem from the start. Any ideas?

    Read the article

  • Slow parity initialization of RAID-5 array on HP Smart Array 411 controller

    - by Rob Nicholson
    On 29th October 2011, I built a RAID-5 array using 4 x 146.8GB Seagate SAS ST3146855SS drives running at 15k connected to a PowerEdge R515 with HP Smart Array P411 controller running Windows 2008 (so nothing particularly unusual). I know that parity initialisation of a RAID-5 array can take some time but it's still running after 2.5 weeks which seems a little unusual. I'd previously built another array on the same controller using 4 x 2TB SATA-2 drives and that did take a while to complete but a) I'm sure it was less than 2.5 weeks, b) that array was ~12 times bigger and c) during initialization, the percentrage slowly increased each day. At the moment, the status display for this new 2nd array simply says "Parity Initialization Status: In Progress" and it's said that since the start. It's this lack of change on the status that worries me the most - feels like it's not actually doing anything. Do you think something has gone wrong or am I being unpatient and for some reason, the status not increasing is normal? I kind of expected a much smaller array on faster drives (15k SAS versus 7.5k SATA-2) to build in a few days. This is our primary SAN running StarWind so my "have a play" options are very limited. This 2nd array is currently in use for one small virtual disk so I could shut the target machine down, move the virtual disk to another drive and try rebuilding.

    Read the article

  • Trouble with HP printer

    - by reyjavikvi
    I have a HP Photosmart C3180 (it's a printer/scanner). For some reason, it recently stopped working. The power light is blinking (I think all the other lights are one, but don't remember, I'm not there right now), and the only way to turn it off is to unplug it. It won't print anything, and when you put a page in the tray it sucks it in without printing anything on it and stops when the paper is on its way out (Again, I don't remember how we managed to get it out, sorry). This printer is hooked up to a computer running XP, but it doesn't work either when printing from the network. Weirdly, the scanner works fine. Do you have any ideas on what could be the problem? Could it be a driver problem? By the way, sorry if the question lacks a bit of detail. I don't know much about printers, and I don't have it here so I can't remember exactly all the details. If needed I can update the question tonight or tomorrow.

    Read the article

  • Unnamed, hidden partitions on my 500 GB HD, HP Pavilion dm4 Laptop

    - by emotionull
    I have multiple doubts here. Its a Seagate 500GB 7200RPM HD. I had installed it few months back after my original Laptop HD stopped working. The current drives on my latop, as shown by the Windows Disk Management are: After installing the new HD, I had done a complete clean install of Windows 7 and I didn't create any parition myself, manually. So there are 4 drives. Even previously, before I installed this new HD, my laptop had 4 Partitions. But the there were no un-named partitions like the two in this case. The other two were HP tools and Recovery or something. It was pre-configured, Factory installed Windows. Also, now when I right cick on the unnamed Drives from Disk Management, all the options are greyed out (see image) except the delete partition image. So how do I know what's inside those partitions? Will it be ok if I delete them? I want install Ubuntu and dual boot it with my current windows installation. I cannot do it in current setup as there are already 4 partitions of my HD and if I will try to make a new partition, it will be a logical one (correct me if I am wrong here). So can I delete the un-named, hidden partitions and use them for Ubuntu? A bit unrelated question. As a backup option, can I use the Windows 7's Backup and Restore facility to keep a complete backup of all the drivers and system softwares.

    Read the article

  • Installing a new Motherboard in a HP xw6200 case

    - by thing2k
    I have a HP xw6200 Workstation, that is rather long in the tooth, and with 2 physical CPUs, it is quite inefficient. So, the plan was to upgrade the internals. Nothing special: AMD Athlon II X4 640 ASUS M4A78KT-M LE (mATX) 2x 2GB DDR3 1333MHz RAM. 3p under my £150 budget The issues: The pin connector for the front panel isn't a good fit, but I can trim it to size. The PSU has a 8-Pin Power connector, unsurprisingly, the new board has a 4 pin socket. The pins do line up, but I would have to cut it in half to fit. Finally, due to the weight of heat-sinks, they are screwed directly into the case. It turns out that these screws also lock the motherboard in place. As to remove it, you remove the heat-sinks, slide the motherboard across and lift it out. I tested the new board for fit, and while it slots in fine, it's not secure. There is nowhere to screw the board down, it is just held in place with plastic standoffs. The only idea I had, was to wedging something between the side of the motherboard and part of the case. Any suggestions?

    Read the article

  • Debian on HP ProLiant server hangs (disk i/o is my guess)

    - by Martin
    I installed Debian (2.6.32-5-amd64) on my HP ProLiant MicroServer (purchased recently.) I also added 3 2tb hd in zfs. I've experienced several server froze. Sometimes it showed Soft lockup CUP stuck for 61s! Today I experienced a different problem (I think) and the message looked like this [431336.200002] Call Trace: [431336.200002] [<ffffffff812fcc7c>] ? _write_lock+0xe/0xf [431336.200002] [<ffffffff810d7a86>] ? __vmalloc_node+0x99/0xe2 : : and (in different screen) [431354.222318] Node 0 DMA32 free: 2064kB min:5520kB low:69900kB high:8280kB active_anon:181648kB inactive_anon:61728kB active_file:313152kB inactive_file:832456kB unevictable: 0kB isolated(anon): 0kB isolated(file):0kB present:1922596kB mlocked:0kB dirty:72kB writeback:0kB mapped:25620kB shmem:344kB slab_reclaimable:34460kB slab_unreclaimable:31400kB kernel_stack:2288kB pagetables:7556kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [431354.222431] lowmem_reserve[]: 0 0 0 0 : : Is this a hardware problem? What tools/methods can I find out the source of the problem? I've used Debian for years but never had problem like this.

    Read the article

  • Profile creation process stuck halfway Websphere

    - by ngubk
    I'm creating a cell profile on Linux Mint 12 , WAS 8.0 Network Deployment Trial. But using manageProfiles.sh or Profile Management Tool, I can not create any profile (cell, application ...). When I check the log file, the profile creation process is always stop halfway (does not show any error, just stuck there). The log is always like this <record> <date>2012-11-02T04:11:15</date> <millis>1351847475108</millis> <sequence>2985</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>replacing value for user.install.root (null) with (/opt/IBM/WebSphere/AppServer/profiles)</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475108</millis> <sequence>2986</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>replacing value for was.install.root (/opt/IBM/WebSphere/AppServer) with (/opt/IBM/WebSphere/AppServer)</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475108</millis> <sequence>2987</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>replacing value for was.repository.root (null) with (/opt/IBM/WebSphere/AppServer/profiles/config)</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475108</millis> <sequence>2988</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>replacing value for com.ibm.ws.scripting.wsadminprops (null) with (/opt/IBM/WebSphere/AppServer/profiles/properties/wsadmin.properties)</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475120</millis> <sequence>2989</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>Resetting listener available status to: false</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475121</millis> <sequence>2990</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>setting wsadmin requester timeouts</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475128</millis> <sequence>2991</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>wsadmin requester retry count = 240000, initialization retry count = 12000, shutdown retry count = 12000</message> </record> <record> <date>2012-11-02T04:11:15</date> <millis>1351847475128</millis> <sequence>2992</sequence> <logger>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</logger> <level>INFO</level> <class>com.ibm.ws.install.configmanager.actionengine.ant.utils.ANTLogToCmtLogAdapter</class> <method>messageLogged</method> <thread>0</thread> <message>Checking for wsadmin listener initialization</message> </record>

    Read the article

  • Is post-sudden-power-loss filesystem corruption on an SSD drive's ext3 partition "expected behavior"?

    - by Jeremy Friesner
    My company makes an embedded Debian Linux device that boots from an ext3 partition on an internal SSD drive. Because the device is an embedded "black box", it is usually shut down the rude way, by simply cutting power to the device via an external switch. This is normally okay, as ext3's journalling keeps things in order, so other than the occasional loss of part of a log file, things keep chugging along fine. However, we've recently seen a number of units where after a number of hard-power-cycles the ext3 partition starts to develop structural issues -- in particular, we run e2fsck on the ext3 partition and it finds a number of issues like those shown in the output listing at the bottom of this Question. Running e2fsck until it stops reporting errors (or reformatting the partition) clears the issues. My question is... what are the implications of seeing problems like this on an ext3/SSD system that has been subjected to lots of sudden/unexpected shutdowns? My feeling is that this might be a sign of a software or hardware problem in our system, since my understanding is that (barring a bug or hardware problem) ext3's journalling feature is supposed to prevent these sorts of filesystem-integrity errors. (Note: I understand that user-data is not journalled and so munged/missing/truncated user-files can happen; I'm specifically talking here about filesystem-metadata errors like those shown below) My co-worker, on the other hand, says that this is known/expected behavior because SSD controllers sometimes re-order write commands and that can cause the ext3 journal to get confused. In particular, he believes that even given normally functioning hardware and bug-free software, the ext3 journal only makes filesystem corruption less likely, not impossible, so we should not be surprised to see problems like this from time to time. Which of us is right? Embedded-PC-failsafe:~# ls Embedded-PC-failsafe:~# umount /mnt/unionfs Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Invalid inode number for '.' in directory inode 46948. Fix<y>? yes Directory inode 46948, block 0, offset 12: directory corrupted Salvage<y>? yes Entry 'status_2012-11-26_14h13m41.csv' in /var/log/status_logs (46956) has deleted/unused inode 47075. Clear<y>? yes Entry 'status_2012-11-26_10h42m58.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47076. Clear<y>? yes Entry 'status_2012-11-26_11h29m41.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47080. Clear<y>? yes Entry 'status_2012-11-26_11h42m13.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47081. Clear<y>? yes Entry 'status_2012-11-26_12h07m17.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47083. Clear<y>? yes Entry 'status_2012-11-26_12h14m53.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47085. Clear<y>? yes Entry 'status_2012-11-26_15h06m49.csv' in /var/log/status_logs (46956) has deleted/unused inode 47088. Clear<y>? yes Entry 'status_2012-11-20_14h50m09.csv' in /var/log/status_logs (46956) has deleted/unused inode 47073. Clear<y>? yes Entry 'status_2012-11-20_14h55m32.csv' in /var/log/status_logs (46956) has deleted/unused inode 47074. Clear<y>? yes Entry 'status_2012-11-26_11h04m36.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47078. Clear<y>? yes Entry 'status_2012-11-26_11h54m45.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47082. Clear<y>? yes Entry 'status_2012-11-26_12h12m20.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47084. Clear<y>? yes Entry 'status_2012-11-26_12h33m52.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47086. Clear<y>? yes Entry 'status_2012-11-26_10h51m59.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47077. Clear<y>? yes Entry 'status_2012-11-26_11h17m09.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47079. Clear<y>? yes Entry 'status_2012-11-26_12h54m11.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47087. Clear<y>? yes Pass 3: Checking directory connectivity '..' in /etc/network/run (46948) is <The NULL inode> (0), should be /etc/network (46953). Fix<y>? yes Couldn't fix parent of inode 46948: Couldn't find parent directory entry Pass 4: Checking reference counts Unattached inode 46945 Connect to /lost+found<y>? yes Inode 46945 ref count is 2, should be 1. Fix<y>? yes Inode 46953 ref count is 5, should be 4. Fix<y>? yes Pass 5: Checking group summary information Block bitmap differences: -(208264--208266) -(210062--210068) -(211343--211491) -(213241--213250) -(213344--213393) -213397 -(213457--213463) -(213516--213521) -(213628--213655) -(213683--213688) -(213709--213728) -(215265--215300) -(215346--215365) -(221541--221551) -(221696--221704) -227517 Fix<y>? yes Free blocks count wrong for group #6 (17247, counted=17611). Fix<y>? yes Free blocks count wrong (161691, counted=162055). Fix<y>? yes Inode bitmap differences: +(47089--47090) +47093 +47095 +(47097--47099) +(47101--47104) -(47219--47220) -47222 -47224 -47228 -47231 -(47347--47348) -47350 -47352 -47356 -47359 -(47457--47488) -47985 -47996 -(47999--48000) -48017 -(48027--48028) -(48030--48032) -48049 -(48059--48060) -(48062--48064) -48081 -(48091--48092) -(48094--48096) Fix<y>? yes Free inodes count wrong for group #6 (7608, counted=7624). Fix<y>? yes Free inodes count wrong (61919, counted=61935). Fix<y>? yes embeddedrootwrite: ***** FILE SYSTEM WAS MODIFIED ***** embeddedrootwrite: ********** WARNING: Filesystem still has errors ********** embeddedrootwrite: 657/62592 files (24.4% non-contiguous), 87882/249937 blocks Embedded-PC-failsafe:~# Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Directory entry for '.' in ... (46948) is big. Split<y>? yes Missing '..' in directory inode 46948. Fix<y>? yes Setting filetype for entry '..' in ... (46948) to 2. Pass 3: Checking directory connectivity '..' in /etc/network/run (46948) is <The NULL inode> (0), should be /etc/network (46953). Fix<y>? yes Pass 4: Checking reference counts Inode 2 ref count is 12, should be 13. Fix<y>? yes Pass 5: Checking group summary information embeddedrootwrite: ***** FILE SYSTEM WAS MODIFIED ***** embeddedrootwrite: 657/62592 files (24.4% non-contiguous), 87882/249937 blocks Embedded-PC-failsafe:~# Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite: clean, 657/62592 files, 87882/249937 blocks

    Read the article

  • How mod_cache working with "must-revalidate" and "max-age"?

    - by Dmitriy Sosunov
    Quick question before I will explain my flow: ?an mod_cache perform revalidate with if-none-match only if max-age is expired in case if it configured in reverse proxy mode? My goal is to reduce a number of revalidation requests to our the origin server. For instance: The first request goes to the origin server and then mod_cache save a response in to the cache according to header cache-control: max-age. And only when max-age is expired then mod_cache will revalidate with if-none-match. Currently, mod_cache revalidate each request, regardless that max-age is defined or not. My configuration of Apache 2.4.3 (Windows), on linux I see the same behavior that I will show below. ServerName proxy.lo ProxyRequests Off ProxyPreserveHost Off Header set Vary "Accept, Content-Type, Content-Encoding, Accept-Language" RequestHeader set X-Forwarded-Proto "http" # modify header for user agent's Header set Cache-Control "private, no-cache, no-store, no-transform" CacheQuickHandler off CacheDefaultExpire 300 # the origin server do not provide last-modified CacheIgnoreNoLastMod On CacheIgnoreCacheControl On # the origin server define cache-control: private, no-store only for user agents # Therefore, I would like ignore those headers on the proxy server. CacheStorePrivate On CacheStoreNoStore On CacheEnable disk / CacheRoot "C:/Apache.Cache" CacheDirLevels 5 CacheDirLength 4 CacheMinExpire 15 CacheDetailHeader on CacheHeader on KeepAlive Off ProxyPass / http://origin.lo/ ProxyPassReverse / http://origin.lo/ Also, I have turned on debug log level to see how mod_cache handles a content for caching: I provided this to show that mod_proxy always decides that a content isn't fresh. Why?I provided this to show that mod_proxy always decide that a content isn't fresh. Why? max-age was provided (see below). [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] cache_storage.c(624): [client 192.168.1.100:63741] AH00698: cache: Key for entity /testpage?(null) is http://proxy.lo/testpage? [Sun Nov 04 11:58:42.899890 2012] [cache_disk:debug] [pid 6492:tid 1400] mod_cache_disk.c(569): [client 192.168.1.100:63741] AH00709: Recalled cached URL info header http://proxy.lo/testpage? [Sun Nov 04 11:58:42.899890 2012] [cache_disk:debug] [pid 6492:tid 1400] mod_cache_disk.c(865): [client 192.168.1.100:63741] AH00720: Recalled headers for URL http://proxy.lo/testpage? [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] cache_storage.c(320): [client 192.168.1.100:63741] AH00695: Cached response for /testpage isn't fresh. Adding/replacing conditional request headers. [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(414): [client 192.168.1.100:63741] AH00757: Adding CACHE_SAVE filter for /testpage [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(448): [client 192.168.1.100:63741] AH00759: Adding CACHE_REMOVE_URL filter for /testpage [Sun Nov 04 11:58:42.899890 2012] [proxy:debug] [pid 6492:tid 1400] mod_proxy.c(1068): [client 192.168.1.100:63741] AH01143: Running scheme http handler (attempt 0) [Sun Nov 04 11:58:42.899890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(1976): AH00942: HTTP: has acquired connection for (origin.lo) [Sun Nov 04 11:58:42.899890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(2029): [client 192.168.1.100:63741] AH00944: connecting http://origin.lo/testpage to origin.lo:80 [Sun Nov 04 11:58:42.901890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(2151): [client 192.168.1.100:63741] AH00947: connected /testpage to origin.lo:80 [Sun Nov 04 11:58:42.901890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(2554): AH00962: HTTP: connection complete to 192.168.1.100:80 (origin.lo) [Sun Nov 04 11:58:42.903890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(1991): AH00943: http: has released connection for (origin.lo) [Sun Nov 04 11:58:42.903890 2012] [headers:debug] [pid 6492:tid 1400] mod_headers.c(800): AH01502: headers: ap_headers_output_filter() [Sun Nov 04 11:58:42.903890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(1190): [client 192.168.1.100:63741] AH00769: cache: Caching url: /testpage [Sun Nov 04 11:58:42.903890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(1196): [client 192.168.1.100:63741] AH00770: cache: Removing CACHE_REMOVE_URL filter. [Sun Nov 04 11:58:42.904890 2012] [cache_disk:debug] [pid 6492:tid 1400] mod_cache_disk.c(1318): [client 192.168.1.100:63741] AH00737: commit_entity: Headers and body for URL http://proxy.lo/testpage? cached. The first request to the origin server without mod_proxy to http://origin.lo/ GET http://origin.lo/testpage HTTP/1.1 Host: origin.lo Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 The first response from the origin without mod_proxy HTTP/1.1 200 OK Cache-Control: must-revalidate, proxy-revalidate, max-age=30 Content-Type: application/json; charset=utf-8 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Sun, 04 Nov 2012 10:11:01 GMT Content-Length: 1877 So, I assumed that revalidation must be occur only in 30 seconds after the success response. Is't right? Let's check it:) Within 30 sec, the Google Chrome didn't perform any requests to the origin server to revalidate a request and has return the response from local cache. When max-age is expired, the Google Chrome perform a request to revalidate: GET http://origin.lo/testpage HTTP/1.1 Host: origin.lo Connection: keep-alive Cache-Control: max-age=0 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/xml If-None-Match: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 and response: HTTP/1.1 304 Not Modified Cache-Control: must-revalidate, proxy-revalidate, max-age=30 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Sun, 04 Nov 2012 10:16:20 GMT As you can see, all works as expected. User agent revalidates request only when max-age is expired. Let's now try perform the folling flow though mod_proxy (see configuration above). The first request: GET http://proxy.lo/testpage HTTP/1.1 Host: proxy.lo Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 and the response was: HTTP/1.1 200 OK Date: Sun, 04 Nov 2012 10:23:36 GMT Server: Apache Cache-Control: private, no-cache, no-store, no-transform Content-Type: application/json; charset=utf-8 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Content-Length: 1932 Vary: Accept,Content-Type,Content-Encoding,Accept-Language X-Cache: MISS from proxy.lo X-Cache-Detail: "cache miss: attempting entity save" from proxy.lo Connection: close Ok, let's see to the disk cache and try to see how request and response was stored. (I cut binary data) http://proxy.lo/testpage? Cache-Control: private, no-cache, no-store, no-transform Content-Type: application/json; charset=utf-8 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Date: Sun, 04 Nov 2012 10:27:15 GMT Content-Length: 1932 Vary: Accept, Content-Type, Content-Encoding, Accept-Language Host: proxy.lo User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 X-Forwarded-Proto: http Cache-Control: max-age=300, must-revalidate X-Forwarded-For: 192.168.1.100 X-Forwarded-Host: proxy.lo X-Forwarded-Server: origin.lo Ok, what we see? We see that the first request was performed with max-age=300 & must-revalidate Ok, looks good, as for me, lets perform the next call: GET http://proxy.lo/testpage HTTP/1.1 Host: proxy.lo Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 and the second response from mod_proxy: HTTP/1.1 200 OK Date: Sun, 04 Nov 2012 10:31:58 GMT Server: Apache Cache-Control: private, no-cache, no-store, no-transform ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Content-Length: 1932 Vary: Accept,Content-Type,Content-Encoding,Accept-Language X-Cache: REVALIDATE from proxy.lo X-Cache-Detail: "conditional cache hit: entity refreshed" from proxy.lo Connection: close Content-Type: application/json; charset=utf-8 SO, MY QUESTION IS: WHY mod_proxy perform revalidation on each request regardless that max-age is defined? N.B. Apache 2.4.3 Thanks, I would be grateful for any help.

    Read the article

  • Smart Array P400 - Accelerator Replacement Battery Failure

    - by inflammable
    TL;DR - Is the immediate failure of a replacement battery, for a failed battery, on a battery backed accelerator for a Smart Array P400 controller a common occurrence? Or are we likely to have an storage controller with an impending and critical fault? We have a slightly confusing situation with a Smart Array P400 storage controller with the 512mb battery backed accelerator addon on an HP DL380 server. The storage controller is (afaik) running the latest firmware and driver: Model: Smart Array P400 Controller Status: OK Firmware Version: 7.24 Serial Number: *snip* Rebuild Priority: Medium Expand Priority: Medium Number Of Ports: 2 The storage diagnostic (both on the both boot-up screen for the controller and within the 'Management Homepage' and the 'HP Array Diagnostic Utility') recently starting showing the following status a fault for the battery for the accelerator: Accelerator Status: Temporarily Disabled Error Code: Cache Disabled Low Batteries Serial Number: *snip* Total Memory: 524288 KB Read Cache: 25% Write Cache: 75% Battery Status: Failed Read Errors: 0 Write Errors: 0 We replaced the battery with a new unit (a visual inspection of the P400 card showing nothing unusual) and saw the same fault - but expected this to disappear over the course of a few hours/days as it charged. This didn't happy, and the fault status remains the same as above. Given the battery is a genuine part from HP, I wouldn't have expected a replacement battery to fail straight away, or to be dead-on-arrival (is that naivety on my part?). Is the immediate failure of a replacement battery, for a failed battery, on a battery backed accelerator a common occurrence? Or are we likely to have an storage controller with an impending and critical fault? Is there any diagnostic that could tell me more about the failed battery, without cracking the server open again? Many thanks!

    Read the article

  • Are you a GPGPU developer? Participate in our UX study

    - by Daniel Moth
    You know that I work on the parallel debugger in Visual Studio and I've talked about GPGPU before and I have also mentioned UX. Below is a request from my UX colleagues that pulls all of it together. If you write and debug parallel code that uses GPUs for non-graphical, computationally intensive operations keep reading. The Microsoft Visual Studio Parallel Computing team is seeking developers for a 90-minute research study. The study will take place via LiveMeeting or at a usability lab in Redmond, depending on your preference. We will walk you through an example of debugging GPGPU code in Visual Studio with you giving us step-by-step feedback. ("Is this what you would you expect?", "Are we showing you the things that would help you?", "How would you improve this") The walkthrough utilizes a “paper” version of our current design. After the walkthrough, we would then show you some additional design ideas and seek your input on various design tradeoffs. Are you interested or know someone who might be a good fit? Let us know at this address: [email protected]. Those who participate (and those who referred them), will receive a gratuity item from a list of current Microsoft products. Comments about this post welcome at the original blog.

    Read the article

  • I need scanning software to use with my scanner.

    - by D Connors
    So, I got this (HP F4280) printer/scanner about a year ago, and I'm really happy with it. The only thing is that I never really liked the HP scanning software that came with it. A few months ago I reformatted and reinstalled windows 7. Then, once I plugged in the printer, I noticed that windows recognized it automatically, and offered to install all the drivers by itself. So instead of manually installing the driver that came in the CD, I simply let windows automatically install it from its servers, and so far it's great. Instead of HP's scanning software (that really wasn't pleasing me), I got a very simplified interface that is more than enough for my ocasional scanning habits. Until today. Today I had to scan a bunch of old pictures for my father. And that simple interface felt like it was lacking quite a few features to make this repetitive task a little easier. And that's why I'm now looking for a good software to use for scanning. By "good" I mean anything well thought out, and specially anything that will make my life easier when repetitive-scanning. It doesn't need to have professional tweaking options, but having them is not a problem either. You guys got anything?

    Read the article

  • Are you a GPGPU developer? Participate in our UX study

    - by Daniel Moth
    You know that I work on the parallel debugger in Visual Studio and I've talked about GPGPU before and I have also mentioned UX. Below is a request from my UX colleagues that pulls all of it together. If you write and debug parallel code that uses GPUs for non-graphical, computationally intensive operations keep reading. The Microsoft Visual Studio Parallel Computing team is seeking developers for a 90-minute research study. The study will take place via LiveMeeting or at a usability lab in Redmond, depending on your preference. We will walk you through an example of debugging GPGPU code in Visual Studio with you giving us step-by-step feedback. ("Is this what you would you expect?", "Are we showing you the things that would help you?", "How would you improve this") The walkthrough utilizes a “paper” version of our current design. After the walkthrough, we would then show you some additional design ideas and seek your input on various design tradeoffs. Are you interested or know someone who might be a good fit? Let us know at this address: [email protected]. Those who participate (and those who referred them), will receive a gratuity item from a list of current Microsoft products. Comments about this post welcome at the original blog.

    Read the article

  • high load average, high wait, dmesg raid error messages (debian nfs server)

    - by John Stumbles
    Debian 6 on HP proliant (2 CPU) with raid (2*1.5T RAID1 + 2*2T RAID1 joined RAID0 to make 3.5T) running mainly nfs & imapd (plus samba for windows share & local www for previewing web pages); with local ubuntu desktop client mounting $HOME, laptops accessing imap & odd files (e.g. videos) via nfs/smb; boxes connected 100baseT or wifi via home router/switch uname -a Linux prole 2.6.32-5-686 #1 SMP Wed Jan 11 12:29:30 UTC 2012 i686 GNU/Linux Setup has been working for months but prone to intermittently going very slow (user experience on desktop mounting $HOME from server, or laptop playing videos) and now consistently so bad I've had to delve into it to try to find what's wrong(!) Server seems OK at low load e.g. (laptop) client (with $HOME on local disk) connecting to server's imapd and nfs mounting RAID to access 1 file: top shows load ~ 0.1 or less, 0 wait but when (desktop) client mounts $HOME and starts user KDE session (all accessing server) then top shows e.g. top - 13:41:17 up 3:43, 3 users, load average: 9.29, 9.55, 8.27 Tasks: 158 total, 1 running, 157 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.4%sy, 0.0%ni, 49.0%id, 49.7%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 903856k total, 851784k used, 52072k free, 171152k buffers Swap: 0k total, 0k used, 0k free, 476896k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3935 root 20 0 2456 1088 784 R 2 0.1 0:00.02 top 1 root 20 0 2028 680 584 S 0 0.1 0:01.14 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.12 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.16 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:00.42 events/0 10 root 20 0 0 0 0 S 0 0.0 0:02.26 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 netns 14 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 15 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.02 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.02 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.08 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.00 kseriod 28 root 20 0 0 0 0 S 0 0.0 0:04.19 kondemand/0 29 root 20 0 0 0 0 S 0 0.0 0:02.93 kondemand/1 30 root 20 0 0 0 0 S 0 0.0 0:00.00 khungtaskd 31 root 20 0 0 0 0 S 0 0.0 0:00.18 kswapd0 32 root 25 5 0 0 0 S 0 0.0 0:00.00 ksmd 33 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/0 34 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/1 35 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/0 36 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/1 203 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 204 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd 205 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/0 206 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/1 207 root 20 0 0 0 0 S 0 0.0 0:00.14 ata_aux 208 root 20 0 0 0 0 S 0 0.0 0:00.01 scsi_eh_0 dmesg suggests there's a disk problem: .............. (previous episode) [13276.966004] raid1:md0: read error corrected (8 sectors at 489900360 on sdc7) [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13279.569186] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13279.569211] ata4.00: irq_stat 0x40000008 [13279.569230] ata4.00: failed command: READ FPDMA QUEUED [13279.569257] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13279.569262] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13279.569306] ata4.00: status: { DRDY ERR } [13279.569321] ata4.00: error: { UNC } [13279.575362] ata4.00: configured for UDMA/133 [13279.575388] ata4: EH complete [13283.169224] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13283.169246] ata4.00: irq_stat 0x40000008 [13283.169263] ata4.00: failed command: READ FPDMA QUEUED [13283.169289] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13283.169294] res 41/40:00:07:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13283.169331] ata4.00: status: { DRDY ERR } [13283.169345] ata4.00: error: { UNC } [13283.176071] ata4.00: configured for UDMA/133 [13283.176104] ata4: EH complete [13286.224814] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13286.224837] ata4.00: irq_stat 0x40000008 [13286.224853] ata4.00: failed command: READ FPDMA QUEUED [13286.224879] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13286.224884] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13286.224922] ata4.00: status: { DRDY ERR } [13286.224935] ata4.00: error: { UNC } [13286.231277] ata4.00: configured for UDMA/133 [13286.231303] ata4: EH complete [13288.802623] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13288.802646] ata4.00: irq_stat 0x40000008 [13288.802662] ata4.00: failed command: READ FPDMA QUEUED [13288.802688] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13288.802693] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13288.802731] ata4.00: status: { DRDY ERR } [13288.802745] ata4.00: error: { UNC } [13288.808901] ata4.00: configured for UDMA/133 [13288.808927] ata4: EH complete [13291.380430] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13291.380453] ata4.00: irq_stat 0x40000008 [13291.380470] ata4.00: failed command: READ FPDMA QUEUED [13291.380496] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13291.380501] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13291.380577] ata4.00: status: { DRDY ERR } [13291.380594] ata4.00: error: { UNC } [13291.386517] ata4.00: configured for UDMA/133 [13291.386543] ata4: EH complete [13294.347147] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13294.347169] ata4.00: irq_stat 0x40000008 [13294.347186] ata4.00: failed command: READ FPDMA QUEUED [13294.347211] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13294.347217] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13294.347254] ata4.00: status: { DRDY ERR } [13294.347268] ata4.00: error: { UNC } [13294.353556] ata4.00: configured for UDMA/133 [13294.353583] sd 3:0:0:0: [sdc] Unhandled sense code [13294.353590] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [13294.353599] sd 3:0:0:0: [sdc] Sense Key : Medium Error [current] [descriptor] [13294.353610] Descriptor sense data with sense descriptors (in hex): [13294.353616] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [13294.353635] 23 05 6a 06 [13294.353644] sd 3:0:0:0: [sdc] Add. Sense: Unrecovered read error - auto reallocate failed [13294.353657] sd 3:0:0:0: [sdc] CDB: Read(10): 28 00 23 05 6a 00 00 00 08 00 [13294.353675] end_request: I/O error, dev sdc, sector 587557382 [13294.353726] ata4: EH complete [13294.366953] raid1:md0: read error corrected (8 sectors at 489900544 on sdc7) [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror and they're happening quite frequently, which I guess is liable to account for the performance problem(?) # dmesg | grep mirror [12433.561822] raid1: sdc7: redirecting sector 489900464 to another mirror [12449.428933] raid1: sdb7: redirecting sector 489900504 to another mirror [12464.807016] raid1: sdb7: redirecting sector 489900512 to another mirror [12480.196222] raid1: sdb7: redirecting sector 489900520 to another mirror [12495.585413] raid1: sdb7: redirecting sector 489900528 to another mirror [12510.974424] raid1: sdb7: redirecting sector 489900536 to another mirror [12526.374933] raid1: sdb7: redirecting sector 489900544 to another mirror [12542.619938] raid1: sdc7: redirecting sector 489900608 to another mirror [12559.431328] raid1: sdc7: redirecting sector 489900616 to another mirror [12576.553866] raid1: sdc7: redirecting sector 489900624 to another mirror [12592.065265] raid1: sdc7: redirecting sector 489900632 to another mirror [12607.621121] raid1: sdc7: redirecting sector 489900640 to another mirror [12623.165856] raid1: sdc7: redirecting sector 489900648 to another mirror [12638.699474] raid1: sdc7: redirecting sector 489900656 to another mirror [12655.610881] raid1: sdc7: redirecting sector 489900664 to another mirror [12672.255617] raid1: sdc7: redirecting sector 489900672 to another mirror [12672.288746] raid1: sdc7: redirecting sector 489900680 to another mirror [12672.332376] raid1: sdc7: redirecting sector 489900688 to another mirror [12672.362935] raid1: sdc7: redirecting sector 489900696 to another mirror [12674.201177] raid1: sdc7: redirecting sector 489900704 to another mirror [12698.045050] raid1: sdc7: redirecting sector 489900712 to another mirror [12698.089309] raid1: sdc7: redirecting sector 489900720 to another mirror [12698.111999] raid1: sdc7: redirecting sector 489900728 to another mirror [12698.134006] raid1: sdc7: redirecting sector 489900736 to another mirror [12719.034376] raid1: sdc7: redirecting sector 489900744 to another mirror [12734.545775] raid1: sdc7: redirecting sector 489900752 to another mirror [12734.590014] raid1: sdc7: redirecting sector 489900760 to another mirror [12734.624050] raid1: sdc7: redirecting sector 489900768 to another mirror [12734.647308] raid1: sdc7: redirecting sector 489900776 to another mirror [12734.664657] raid1: sdc7: redirecting sector 489900784 to another mirror [12734.710642] raid1: sdc7: redirecting sector 489900792 to another mirror [12734.721919] raid1: sdc7: redirecting sector 489900800 to another mirror [12734.744732] raid1: sdc7: redirecting sector 489900808 to another mirror [12734.779330] raid1: sdc7: redirecting sector 489900816 to another mirror [12782.604564] raid1: sdb7: redirecting sector 1242934216 to another mirror [12798.264153] raid1: sdc7: redirecting sector 1242935080 to another mirror [13245.832193] raid1: sdb7: redirecting sector 489898296 to another mirror [13261.376929] raid1: sdb7: redirecting sector 489898304 to another mirror [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror although the arrays are still running on all disks - they haven't given up on any yet: # cat /proc/mdstat Personalities : [raid1] [raid0] md10 : active raid0 md0[0] md1[1] 3368770048 blocks super 1.2 512k chunks md1 : active raid1 sde2[2] sdd2[1] 1464087824 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb7[0] sdc7[2] 1904684920 blocks super 1.2 [2/2] [UU] unused devices: <none> So I think I have some idea what the problem is but I am not a linux sysadmin expert by the remotest stretch of the imagination and would really appreciate some clue checking here with my diagnosis and what do I need to do: obviously I need to source another drive for sdc. (I'm guessing I could buy a larger drive if the price is right: I'm thinking that one day I'll need to grow the size of the array and that would be one less drive to replace with a larger one) then use mdadm to fail out the existing sdc, remove it and fit the new drive fdisk the new drive with the same size partition for the array as the old one had use mdadm to add the new drive into the array that sound OK?

    Read the article

  • Help:Graph contest problem: maybe a modified Dijkstra or another alternative algorithm

    - by newba
    Hi you all, I'm trying to do this contest exercise about graphs: XPTO is an intrepid adventurer (a little too temerarious for his own good) who boasts about exploring every corner of the universe, no matter how inhospitable. In fact, he doesn't visit the planets where people can easily live in, he prefers those where only a madman would go with a very good reason (several millions of credits for instance). His latest exploit is trying to survive in Proxima III. The problem is that Proxima III suffers from storms of highly corrosive acids that destroy everything, including spacesuits that were especially designed to withstand corrosion. Our intrepid explorer was caught in a rectangular area in the middle of one of these storms. Fortunately, he has an instrument that is capable of measuring the exact concentration of acid on each sector and how much damage it does to his spacesuit. Now, he only needs to find out if he can escape the storm. Problem The problem consists of finding an escape route that will allow XPTOto escape the noxious storm. You are given the initial energy of the spacesuit, the size of the rectangular area and the damage that the spacesuit will suffer while standing in each sector. Your task is to find the exit sector, the number of steps necessary to reach it and the amount of energy his suit will have when he leaves the rectangular area. The escape route chosen should be the safest one (i.e., the one where his spacesuit will be the least damaged). Notice that Rodericus will perish if the energy of his suit reaches zero. In case there are more than one possible solutions, choose the one that uses the least number of steps. If there are at least two sectors with the same number of steps (X1, Y1) and (X2, Y2) then choose the first if X1 < X2 or if X1 = X2 and Y1 < Y2. Constraints 0 < E = 30000 the suit's starting energy 0 = W = 500 the rectangle's width 0 = H = 500 rectangle's height 0 < X < W the starting X position 0 < Y < H the starting Y position 0 = D = 10000 the damage sustained in each sector Input The first number given is the number of test cases. Each case will consist of a line with the integers E, X and Y. The following line will have the integers W and H. The following lines will hold the matrix containing the damage D the spacesuit will suffer whilst in the corresponding sector. Notice that, as is often the case for computer geeks, (1,1) corresponds to the upper left corner. Output If there is a solution, the output will be the remaining energy, the exit sector's X and Y coordinates and the number of steps of the route that will lead Rodericus to safety. In case there is no solution, the phrase Goodbye cruel world! will be written. Sample Input 3 40 3 3 7 8 12 11 12 11 3 12 12 12 11 11 12 2 1 13 11 11 12 2 13 2 14 10 11 13 3 2 1 12 10 11 13 13 11 12 13 12 12 11 13 11 13 12 13 12 12 11 11 11 11 13 13 10 10 13 11 12 8 3 4 7 6 4 3 3 2 2 3 2 2 5 2 2 2 3 3 2 1 2 2 3 2 2 4 3 3 2 2 4 1 3 1 4 3 2 3 1 2 2 3 3 0 3 4 10 3 4 7 6 3 3 1 2 2 1 0 2 2 2 4 2 2 5 2 2 1 3 0 2 2 2 2 1 3 3 4 2 3 4 4 3 1 1 3 1 2 2 4 2 2 1 Sample Output 12 5 1 8 Goodbye cruel world! 5 1 4 2 Basically, I think we have to do a modified Dijkstra, in which the distance between nodes is the suit's energy (and we have to subtract it instead of suming up like is normal with distances) and the steps are the ....steps made along the path. The pos with the bester binomial (Energy,num_Steps) is our "way out". Important : XPTO obviously can't move in diagonals, so we have to cut out this cases. I have many ideas, but I have such a problem implementing them... Could someone please help me thinking about this with some code or, at least, ideas? Am I totally wrong?

    Read the article

  • custom listview adapter getView method being called multiple times, and in no coherent order

    - by edzillion
    I have a custom list adapter: class ResultsListAdapter extends ArrayAdapter<RecordItem> { in the overridden 'getView' method I do a print to check what position is and whether it is a convertView or not: @Override public View getView(int position, View convertView, ViewGroup parent) { System.out.println("getView " + position + " " + convertView); The output of this (when the list is first displayed, no user input as yet) 04-11 16:24:05.860: INFO/System.out(681): getView 0 null 04-11 16:24:29.020: INFO/System.out(681): getView 1 android.widget.RelativeLayout@43d415d8 04-11 16:25:48.070: INFO/System.out(681): getView 2 android.widget.RelativeLayout@43d415d8 04-11 16:25:49.110: INFO/System.out(681): getView 3 android.widget.RelativeLayout@43d415d8 04-11 16:25:49.710: INFO/System.out(681): getView 0 android.widget.RelativeLayout@43d415d8 04-11 16:25:50.251: INFO/System.out(681): getView 1 null 04-11 16:26:01.300: INFO/System.out(681): getView 2 null 04-11 16:26:02.020: INFO/System.out(681): getView 3 null 04-11 16:28:28.091: INFO/System.out(681): getView 0 null 04-11 16:37:46.180: INFO/System.out(681): getView 1 android.widget.RelativeLayout@43cff8f0 04-11 16:37:47.091: INFO/System.out(681): getView 2 android.widget.RelativeLayout@43cff8f0 04-11 16:37:47.730: INFO/System.out(681): getView 3 android.widget.RelativeLayout@43cff8f0 AFAIK, though I couldn't find it stated explicitly, getView() is only called for visible rows. Since my app starts with four visible rows at least the position numbers cycling from 0-3 makes sense. But the rest is a mess: Why is getview called for each row four times? Where are these convertViews coming from when I haven't scrolled yet? I did a bit of reseach, and without getting a good answer, I did notice that people were associating this issue with layout issues. So in case, here's the layout that contains the list: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_height="fill_parent" android:layout_width="fill_parent" android:orientation="vertical" > <TextView android:id="@+id/pageDetails" android:layout_width="fill_parent" android:layout_height="wrap_content" /> <ListView android:id="@+id/list" android:layout_width="fill_parent" android:layout_height="wrap_content" android:drawSelectorOnTop="false" /> </LinearLayout> and the layout of each individual row: <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="108dp" android:padding="4dp"> <ImageView android:id="@+id/thumb" android:layout_width="120dp" android:layout_height="fill_parent" android:layout_alignParentTop="true" android:layout_alignParentBottom="true" android:layout_alignParentLeft="true" android:layout_marginRight="8dp" android:src="@drawable/loading" /> <TextView android:id="@+id/price" android:layout_width="wrap_content" android:layout_height="18dp" android:layout_toRightOf="@id/thumb" android:layout_alignParentBottom="true" android:singleLine="true" /> <TextView android:id="@+id/date" android:layout_width="wrap_content" android:layout_height="18dp" android:layout_alignParentBottom="true" android:layout_alignParentRight="true" android:paddingRight="4dp" android:singleLine="true" /> <TextView android:id="@+id/title" android:layout_width="fill_parent" android:layout_height="wrap_content" android:textSize="17dp" android:layout_toRightOf="@id/thumb" android:layout_alignParentRight="true" android:layout_alignParentTop="true" android:paddingRight="4dp" android:layout_alignWithParentIfMissing="true" android:gravity="center" /> Thank you for your time

    Read the article

  • sql: Group by x,y,z; return grouped by x,y with lowest f(z)

    - by Sai Emrys
    This is for http://cssfingerprint.com I collect timing stats about how fast the different methods I use perform on different browsers, etc., so that I can optimize the scraping speed. Separately, I have a report about what each method returns for a handful of URLs with known-correct values, so that I can tell which methods are bogus on which browsers. (Each is different, alas.) The related tables look like this: CREATE TABLE `browser_tests` ( `id` int(11) NOT NULL AUTO_INCREMENT, `bogus` tinyint(1) DEFAULT NULL, `result` tinyint(1) DEFAULT NULL, `method` varchar(255) DEFAULT NULL, `url` varchar(255) DEFAULT NULL, `os` varchar(255) DEFAULT NULL, `browser` varchar(255) DEFAULT NULL, `version` varchar(255) DEFAULT NULL, `created_at` datetime DEFAULT NULL, `updated_at` datetime DEFAULT NULL, `user_agent` varchar(255) DEFAULT NULL, PRIMARY KEY (`id`) ) ENGINE=InnoDB AUTO_INCREMENT=33784 DEFAULT CHARSET=latin1 CREATE TABLE `method_timings` ( `id` int(11) NOT NULL AUTO_INCREMENT, `method` varchar(255) DEFAULT NULL, `batch_size` int(11) DEFAULT NULL, `timing` int(11) DEFAULT NULL, `os` varchar(255) DEFAULT NULL, `browser` varchar(255) DEFAULT NULL, `version` varchar(255) DEFAULT NULL, `user_agent` varchar(255) DEFAULT NULL, `created_at` datetime DEFAULT NULL, `updated_at` datetime DEFAULT NULL, PRIMARY KEY (`id`) ) ENGINE=InnoDB AUTO_INCREMENT=28849 DEFAULT CHARSET=latin1 (user_agent is broken down pre-insert into browser, version, and os from a small list of recognized values using regex; I keep the original user-agent string just in case.) I have a query like this that tells me the average timing for every non-bogus browser / version / method tuple: select c, avg(bogus) as bog, timing, method, browser, version from browser_tests as b inner join ( select count(*) as c, round(avg(timing)) as timing, method, browser, version from method_timings group by browser, version, method having c > 10 order by browser, version, timing ) as t using (browser, version, method) group by browser, version, method having bog < 1 order by browser, version, timing; Which returns something like: c bog tim method browser version 88 0.8333 184 reuse_insert Chrome 4.0.249.89 18 0.0000 238 mass_insert_width Chrome 4.0.249.89 70 0.0400 246 mass_insert Chrome 4.0.249.89 70 0.0400 327 mass_noinsert Chrome 4.0.249.89 88 0.0556 367 reuse_reinsert Chrome 4.0.249.89 88 0.0556 383 jquery Chrome 4.0.249.89 88 0.0556 863 full_reinsert Chrome 4.0.249.89 187 0.0000 105 jquery Chrome 5.0.307.11 187 0.8806 109 reuse_insert Chrome 5.0.307.11 123 0.0000 110 mass_insert_width Chrome 5.0.307.11 176 0.0000 231 mass_noinsert Chrome 5.0.307.11 176 0.0000 237 mass_insert Chrome 5.0.307.11 187 0.0000 314 reuse_reinsert Chrome 5.0.307.11 187 0.0000 372 full_reinsert Chrome 5.0.307.11 12 0.7500 82 reuse_insert Chrome 5.0.335.0 12 0.2500 102 jquery Chrome 5.0.335.0 [...] I want to modify this query to return only the browser/version/method with the lowest timing - i.e. something like: 88 0.8333 184 reuse_insert Chrome 4.0.249.89 187 0.0000 105 jquery Chrome 5.0.307.11 12 0.7500 82 reuse_insert Chrome 5.0.335.0 [...] How can I do this, while still returning the method that goes with that lowest timing? I could filter it app-side, but I'd rather do this in mysql since it'd work better with my caching.

    Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >