Search Results

Search found 2119 results on 85 pages for 'jeff ryan'.

Page 79/85 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• Please Stop Voting Against a Candidate

  - by Brian Lanham

  DISCLAIMER:  This is not a post about “Romney” or “Obama”.  This is not a post for whom I am voting.  This is simply a post to address an issue that I cannot ignore any longer.  This two-party system that we have allowed to establish a foothold is killing this country.    More than 2 Options I was recently asked, “If you had to choose Romney or Obama who would you pick?”  I replied “Non sequiter.  The founders of this nation ensured that I never have to pick from only two candidates.”  But somehow that is the way this country’s citizens think.  I told someone last week that there are around 20 candidates for president and she was genuinely surprised.  (There are actually 25 candidates.)  She had no idea there were that many and, even though she knew there are more, she didn’t know any names beyond Romney and Obama.  Well, I am going to try and educate people like her on other options. Vote for a Candidate, not against another Candidate So this post is the first in a series with a little bit of information about each candidate for president.  I implore you…I beg you, please do your civic duty and conduct a little bit of investigation and research on your own to find the right candidate for you.  Hey, if your candidate is Romney or Obama, that’s fine.  As long as it’s an educated decision.  But please…stop voting against a candidate.  Start voting for a candidate. A List of CandidatesAs I mentioned, I am going to write a little something about each candidate and I’m going to go by alphabetical order by PARTY, then by CANDIDATE LAST NAME so as to not show any bias. P.S. – If you want to know the candidate I selected I am happy to tell you.  But that’s not what this series is about.PARTYCANDIDATEAmerica's Party   Tom HoeflingAmerican Third Position PartyMerlin MillerAmericans Elect PartyNo candidates met the requirement to enter into the online caucus.Constitution PartyVirgil GoodeDemocratic Party   Barack ObamaGrassroots Party   Jim CarlsonGreen Party   Jill SteinIndependent American Party   Will ChristensenJustice PartyRocky AndersonLibertarian Party   Gary JohnsonObjectivist PartyTom StevensPeace and Freedom Party   Roseanne BarrReform PartyAndre BarnettRepublican PartyMitt RomneySocialism and Liberation PartyPeta LindsaySocialist Equality PartyJerry WhiteSocialist Party USAStewart AlexanderSocialist Workers PartyJames HarrisIndependent Candidates Jeff BossRichard DuncanJerry Litzel Dean Morstad Jill Reed Randall TerrySheila Tittle Michael Vargo

  Read the article

• TechEd 2012: Recap

  - by Tim Murphy

  TechEd this week was a great experience and I wanted to wrap it up with a summary post. First let me say a thank you to John and Jeff from GWB for supplying power, connectivity and a place to work in between sessions.  The blogging hub was a great experience in itself.  Getting to talk with other bloggers and other conference goers turned into a series of interesting conversations.  And where else can you almost end up in the day 1 highlights video? The sessions at TechEd were a mixed bag of value.  The Keynotes rocked, both figuratively and literally and most of the sessions that I want to were a good experience and had gems of information to take away.  There were a few exceptions though.  A couple of the sessions turned out to be sales jobs.  Nothing turns me off more than that (there will be some really honest comments on those surveys). TechEd re-enforced for me that much of the value is not in the sessions, but in the networking opportunities. I got to talk with several Microsoft team members and MVPs as well as some of the vendor representative for companies like Inrule and ComponentOne. Also got to expand both my local and extended community with discussions at meal times and waiting for sessions to start. I think this is one of the benefits that a lot of people don’t take advantage of in these conferences that should be a bigger part of the advertising. Exposure to a wide variety of topics, many of which I had not been able to make time for up to this point was envigorating.  The list of topic includes: Office 365, Windows Server 2012, Windows 8, Metro, Azure.  I can’t wait to get back to work and dig into these subjects in more depth. The one complaint that I had and heard from other attendees was that there weren’t enough sessions that were actually about development.  I realize that TechEd started as an event for IT Pros, but there needs to be more value for the Devs.  It all went by too fast and it will take a couple more days to digest the material, but the batteries are and I’m ready to leverage what I’ve learned.  Hopefully we will do it again next year. del.icio.us Tags: TechEd,TechEd 2012

  Read the article

• As the current draft stands, what is the most significant change the "National Strategy for Trusted Identities in Cyberspace" will provoke?

  - by mfg

  A current draft of the "National Strategy for Trusted Identities in Cyberspace" has been posted by the Department of Homeland Security. This question is not asking about privacy or constitutionality, but about how this act will impact developers' business models and development strategies. When the post was made I was reminded of Jeff's November blog post regarding an internet driver's license. Whether that is a perfect model or not, both approaches are attempting to handle a shared problem (of both developers and end users): How do we establish an online identity? The question I ask here is, with respect to the various burdens that would be imposed on developers and users, what are some of the major, foreseeable implementation issues that will arise from the current U.S. Government's proposed solution? For a quick primer on the setup, jump to page 12 for infrastructure components, here are two stand-outs: An Identity Provider (IDP) is responsible for the processes associated with enrolling a subject, and establishing and maintaining the digital identity associated with an individual or NPE. These processes include identity vetting and proofing, as well as revocation, suspension, and recovery of the digital identity. The IDP is responsible for issuing a credential, the information object or device used during a transaction to provide evidence of the subject’s identity; it may also provide linkage to authority, roles, rights, privileges, and other attributes. The credential can be stored on an identity medium, which is a device or object (physical or virtual) used for storing one or more credentials, claims, or attributes related to a subject. Identity media are widely available in many formats, such as smart cards, security chips embedded in PCs, cell phones, software based certificates, and USB devices. Selection of the appropriate credential is implementation specific and dependent on the risk tolerance of the participating entities. Here are the first considered actionable components of the draft: Action 1: Designate a Federal Agency to Lead the Public/Private Sector Efforts Associated with Achieving the Goals of the Strategy Action 2: Develop a Shared, Comprehensive Public/Private Sector Implementation Plan Action 3:Accelerate the Expansion of Federal Services, Pilots, and Policies that Align with the Identity Ecosystem Action 4:Work Among the Public/Private Sectors to Implement Enhanced Privacy Protections Action 5:Coordinate the Development and Refinement of Risk Models and Interoperability Standards Action 6: Address the Liability Concerns of Service Providers and Individuals Action 7: Perform Outreach and Awareness Across all Stakeholders Action 8: Continue Collaborating in International Efforts Action 9: Identify Other Means to Drive Adoption of the Identity Ecosystem across the Nation

  Read the article

• An Unstoppable Force!

  - by TammyBednar

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Building a high-availability database platform presents unique challenges. Combining servers, storage, networking, OS, firmware, and database is complicated and raises important concerns: Will coordination between multiple SME’s delay deployment? Will it be reliable? Will it scale? Will routine maintenance consume precious IT-staff time? Ultimately, will it work? Enter the Oracle Database Appliance, a complete package of software, server, storage, and networking that’s engineered for simplicity. It saves time and money by simplifying deployment, maintenance, and support of database workloads. Plus, it’s based on Intel Xeon processors to ensure a high level of performance and scalability. Take a look at this video to compare Heather and Ted’s approach to building a server for their Oracle database! http://www.youtube.com/watch?v=os4RDVclWS8 If you missed the “Compare Database Platforms: Build vs. Buy” webcast or want to listen again to find out how Jeff Schulte - Vice President at Yodlee uses Oracle Database Appliance.

  Read the article

• Any Recommendations for a Web Based Large File Transfer System?

  - by Glen Richards

  I'm looking for a server software product that: Allows my users to share large files with: The general public securely to 1 or more people (notification via email, optionally with a token that gives them x period of time to download) Allows anyone in the general public to share files with my users. Perhaps by invitation. Has to be user friendly enough to allow my users to use this with out having to bug me as the admin. It needs to be a system that we can install on our own server (we don't want shared data sitting on anyone else's server) A web based solution. Using some kind or secure comms channel would be good too, eg, ssh Files to share could be over 1 GB. I found the question below. WebDav does not sound user friendly enough: http://serverfault.com/questions/86878/recommendations-for-a-secure-and-simple-dropbox-system I've done a lot of searching, but I can't get the search terms right. There are too many services that provide this, but I want something we can install on our own server. A last resort would be to roll my own. Any ideas appreciated. Glen EDIT Sorry Tom and Jeff but Glen specifically says that he's looking for a 'product' so given that I specialise in this field thought that my expertise in this area may have been of use to him. I don't see how him writing services is going to be easy for him to maintain going forward (large IT admin overhead) or simple for his users and the general public to work with.

  Read the article

• What are the right reverse PTR, domain keys, and SPF settings for two domains running the same appli

  - by James A. Rosen

  I just read Jeff Atwood's recent post on DNS configuration for email and decided to give it a go on my application. I have a web-app that runs on one server under two different IPs and domain names, on both HTTP and HTTPS for each: <VirtualHost *:80> ServerName foo.org ServerAlias www.foo.org ... </VirtualHost> <VirtualHost 1.2.3.4:443> ServerName foo.org ServerAlias www.foo.org </VirtualHost> <VirtualHost *:80> ServerName bar.org ServerAlias www.bar.org ... </VirtualHost> <VirtualHost 2.3.4.5:443> ServerName bar.org ServerAlias www.bar.org </VirtualHost> I'm using GMail as my SMTP server. Do I need the reverse PTR and SenderID records? If so, do I put the same ones on all of my records (foo.org, www.foo.org, bar.org, www.bar.org, ASPMX.L.GOOGLE.COM, ASPMX2.GOOGLEMAIL.COM, ..)? I'm pretty sure I want the domain-keys records, but I'm not sure which domains to attach them to. The Google mail servers? foo.org and bar.org? Everything?

  Read the article

• Segmentation fault on login to mysql

  - by numberwhun

  Hello everyone! I recently did a fresh install of Ubuntu on my laptop (HP dv7, AMD Dual Core with 4 gigs RAM). I am working on installing my development environment and tools and one of the first things I was working on is getting MySQL installed. The following was my configure statement with options: ./configure --prefix=/usr/local/mysql --with-big-tables --with-unix-socket-path=/usr/local/mysql/tmp/mysql.sock --with-named-curses-libs=/lib/libncurses.so.5.7 After I did the make;make install, I did the post configuration such as setting the root password and installing the mysqld daemon in its rightful place. My issue is when I try to log in to mysql to start using it, the following shows what happens: $ mysql -u root -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 Server version: 5.1.42 Source distribution Segmentation fault I have searched Google extensively, I have searched through the mysql bugs database and I have yet to find anything that matches my issue. Here is the contents of my my.cnf file, in case you want to see it: $ cat /etc/my.cnf [mysqld] basedir=/usr/local/mysql datadir=/usr/local/mysql socket=/usr/local/mysql/tmp/mysql.sock [mysql.server] user=mysql #basedir=/var/lib [client] socket=/usr/local/mysql/tmp/mysql.sock [mysqld_safe] err-log=/usr/local/mysql/logs/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I am really hoping that someone here can tell me what has gone wrong with my installation as I would really love to know. I welcome and look forward to all responses. Thank you in advance! Best regards, Jeff

  Read the article

• How do I find funny pictures?

  - by Hanno Fietz

  No, not lolcats. And I'm not really looking for a specific site, either. I have often wished that I had some funny picture to illustrate a presentation, a website, a post, an email, or something else. Google image search and stock photo services have hardly ever helped me, although that may be because I'm doing something wrong. Jeff Atwood seems to have no problem to find funny pictures for his codinghorror and stackoverflow blogs, as well as for the error messages on the trilogy sites. One of my favourites was this elephant. Other bloggers also seem to be quite good at it. I'm wondering if I simply lack the creativity or if there's sources or methods I don't know about. I could think of the following ways to get pictures, but I'm not sure whether this is really "how they do it". keep a collection of pictures that you stumbled upon and liked (takes quite some time to build up to a proper library), when you need a picture, there's one in there maybe have pictures on paper, too, like from magazines or ads. when you are looking for a picture, search online (Flickr, Google, stock photos). This has never really worked for me, I don't know why. produce the pictures yourself, i. e. have a good library of source material or find some online and apply some creativity and suitable software. I could imagine that this could work well once you have the practice.

  Read the article

• Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

  - by geerlingguy

  I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

  Read the article

• Any Recommendations for a Web Based Large File Transfer System?

  - by Glen Richards

  I'm looking for a server software product that: Allows my users to share large files with: The general public securely to 1 or more people (notification via email, optionally with a token that gives them x period of time to download) Allows anyone in the general public to share files with my users. Perhaps by invitation. Has to be user friendly enough to allow my users to use this with out having to bug me as the admin. It needs to be a system that we can install on our own server (we don't want shared data sitting on anyone else's server) A web based solution. Using some kind or secure comms channel would be good too, eg, ssh Files to share could be over 1 GB. I found the question below. WebDav does not sound user friendly enough: http://serverfault.com/questions/86878/recommendations-for-a-secure-and-simple-dropbox-system I've done a lot of searching, but I can't get the search terms right. There are too many services that provide this, but I want something we can install on our own server. A last resort would be to roll my own. Any ideas appreciated. Glen EDIT Sorry Tom and Jeff but Glen specifically says that he's looking for a 'product' so given that I specialise in this field thought that my expertise in this area may have been of use to him. I don't see how him writing services is going to be easy for him to maintain going forward (large IT admin overhead) or simple for his users and the general public to work with.

  Read the article

• Are there any custom keyboard available for laptops

  - by Ahe

  My work laptop is a HP elitebook 8560w which I mainly use for programming. Usually I have a external keyboard but recently I have been working out of office and therefore have been using the laptops own keyboard. One thing has really started to bug me. The keyboard layout of this 15.6" laptop contains numpad but the arrow keys are really bad (too small). Also when programming, I really miss a standard inverted T-arrow keys and the home/end/PgUp/PgDn buttons. Then it occurred to me; I would rather give up a numpad than a standard arrow keys. (The keyboard real estate in 15.6" laptop would allow this, and I really have to agree with Jeff Atwood here http://www.codinghorror.com/blog/2009/02/have-keyboard-will-program.html) Which brings me to my question. Do any laptop manufacturers make custom keyboards for their laptops or is there some third party manufacturer who could supply these kind of special keyboards? Quick googling on this doesn't give any meaningful results. Looks like that I have to carry an external keyboard with me if someone here can't give any pointers.

  Read the article

• Extending a home wireless network using two routers running tomato

  - by jalperin

  I have two Asus RT-N16 routers each flashed with Tomato (actually Tomato USB). UPSTAIRS: Router 'A' (located upstairs) is connected to the internet via the WAN port and connected via a LAN port to a 10/100/1000 switch (Switch A). Several desktops are also attached to Switch A. Router A uses IP 192.168.1.1. DOWNSTAIRS: I've just acquired Router 'B' and set it to IP 192.168.1.2. I have a cable running from Switch A downstairs to another switch (Switch B). Tivo, a blu-ray player and a Mac are connected to Switch B. My plan was to connect Router B to Switch B so that I have improved wireless access downstairs. (The wireless signal from Router A gets weak downstairs in a number of locations.) How should I configure Router B so that all devices in the house can see and talk to one another? I know that I need to change DHCP on Router B so that it doesn't cover the same range as DHCP on Router A. Should I be using WDS on the two routers, or is that unnecessary since I already have a wired connection between the two routers? Any other thoughts or suggestions? Thanks! --Jeff

  Read the article

• Recover data from hard drive with partitions (but not most data) overwritten

  - by Macha

  I have a 500GB hard drive I've been keeping around to recover data from that I removed from a failing NAS drive that got sort of... erratic at the end. I finally got rid of the NAS when during a firmware update it removed the partition table. Fast forward to a week ago, when I was building a new PC, and a mixup resulted in me placing the hard drive in question in the new PC and installing Windows XP on the first 100GB. I'm presuming any data on that first 100GB is now gone, but for the rest of it, is there any way I can recover it at home, as professional data recovery is currently too expensive? I have a blank 1TB HDD if I can store any images of that hard drive on. The problem was definitely with the NAS and not the hard drive, as the hard drive had a successful install of Windows when mistakenly place in the new PC, and there were capacitors in the NAS's circuitry clearly broken. The data I want to recover (in order of priority) is: High: Some jpgs of family photos. Medium: Some RAW files. (There are also jpg versions of all of these) Low: Some mp3s, avis and ISOs, I can re-rip most of these if need be, but it'd be handy not to have to. (I don't need a backup lecture, and if you can hold it in from nagging Jeff Atwood for it, you can hold it in from nagging me for it) In short: The partition tables are gone and overwritten. The data is not overwritten, except for an amount equal to the size of a Windows XP SP3 installation.

  Read the article

• Is there any way to shut up my ATI HD 5770?

  - by slpsys

  So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

  Read the article

• What can cause two "identical" setups of IE8 and XP to display things differently?

  - by ccornet

  This has been baffling me for a while. Of the machines I use in visitting Stack Overflow, two of them are machines with the same setup: Dell with Windows XP with IE8. Since they were issued to me by the same company (one to use in the office, one to use at home), they have identical setups as well. But they display certain page elements differently! One is an Optiplex GX620 desktop, the other is an Inspiron 9100 laptop, but somehow the hardware doesn't seem like something that should be overriding how my browser displays things. Nevertheless, the laptop seems to display things differently than what is expected. Differences have included the following: This issue persisted on the laptop after Jeff fixed it, but was repaired for everyone else and on the Desktop. When viewing Vote Counts on a post, the grey line is left immediately beneath the upvotes but a number-sized white space is below that before the downvotes. On the desktop, it displays properly with the two adjacent and divided by a grey line. Code blocks seem to have a blank line at the end on the laptop. The following image illustrates how the last two elements look on the laptop. So, considering that as far as I can tell, these two setups are identical (I have not messed with any settings and they were both initialized identically as well), what else could be causing the display difference?

  Read the article

• Silverlight Cream for February 04, 2011 -- #1040

  - by Dave Campbell

  In this Issue: Shawn Wildermuth, John Papa, Jesse Liberty(-2-), Mike Wolf, Matt Casto, Levente Mihály, Roy Dallal, Mark Monster, Andrea Boschin, and Oren Gal. Above the Fold: Silverlight: "Accept and Cancel Buttons Behavior in Silverlight" Matt Casto WP7: "Windows Phone 7 Runtime Debugging" Mike Wolf Shoutouts: Al Pascual announced a get-together if you're going to be in Phoenix on February 10 (next Thursday)... I just can't tell what time it is from the page: Phoenix Dev Meet-Up From SilverlightCream.com: Ten Pet Peeves of WP7 Applications Check out Shawn Wildermuth's Top 10 annoyances when trying out any new app on the WP7... if you're a dev, you might want to keep these in mind. Silverlight TV 60: Checking Out the Zero Gravity Game, Now on Windows Phone 7 John Papa has Silverlight TV number 60 up and this one features Phoenix' own Ryan Plemons discussing the game Zero Gravity and some of the things he had to do to take the game to WP7 ... and the presentation looks as good from here as it did inside the studio :) The Full Stack: Entity Framework To Phone, The Server Side Jesse Liberty and Jon Galloway have Part 6 of their full-stack podcast up ... this is their exploration of MVC3, ASP.NET, Silverlight, and WP7... pair programming indeed! Life Cycle: Page State Management Jesse Liberty also has episode 29 (can you believe that??) of his Windows Phone From Scratch series up ... he's continuing his previous LifeCycle discussion with Page State Management this time. Windows Phone 7 Runtime Debugging Mike Wolf is one of those guys that when he blogs, we should all pay attention, and this post is no exception... he has contributed a run-time diagnostics logger to the WP7Contrib project ... wow... too cool! Accept and Cancel Buttons Behavior in Silverlight Matt Casto has his blog back up and has a behavior up some intuitive UX on ChildWindows by being able to bind to a default or cancel button and have those events activated when the user hits Enter or Escape... very cool, Matt! A classic memory game: Part 3 - Porting the game to Windows Phone 7 Levente Mihály has Part 3 of his tutorial series up at SilverlightShow, and this go-around is porting his 'memory game' to WP7... and this is pretty all-encompassing... Blend for the UI, Performance, and Tombstoning... plus all the source. Silverlight Memory Leak, Part 1 Roy Dallal completely describes how he used a couple easily-downloadable tools to find the root cause of his memory problems with is Silvleright app. Lots of good investigative information. How to cancel the closing of your Silverlight application (in-browser and out-of-browser) Mark Monster revisits a two-year old post of his on cancelling the closing of a Silverlight app... and he's bringing that concept of warning the user the he's about to exit into the OOB situation as well. Windows Phone 7 - Part #3: Understanding navigation Also continuing his WP7 tutorial series on SilverlightShow, Andrea Boschin has part 3 up which is all about Navigation and preserving state... he also has a video on the page to help demonstrate the GoBack method. Multiple page printing in Silverlight 4 Oren Gal built a Silverlight app for last years' ESRI dev summit, and decided to upgrade it this year with functionality such as save/restore, selecting favorite sessions, and printing. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• How To Quickly Reboot Directly from Windows 7 to XP, Vista, or Ubuntu

  - by The Geek

  One of the biggest annoyances with a dual-boot system is having to wait for your PC to reboot to select the operating system you want to switch to, but there’s a simple piece of software that can make this process easier. This guest article was written by Ryan Dozier from the Doztech tech blog. With a small piece of software called iReboot we can skip the above step all together and instantly reboot into the operating system we want right from Windows. Their description says: “Instead of pressing restart, waiting for Windows to shut down, waiting for your BIOS to post, then selecting the operating system you want to boot into (within the bootloader time-limit!); you just select that entry from iReboot and let it do the rest!” Don’t worry about iReboot reconfiguring  your bootloader or any dual boot configuration you have. iReboot will only boot the selected operating system once and go back to your default settings. Using iReboot iReboot is quick and easy to install. Just download it, link below, run through the setup and select the default configuration. iReboot will automatically figure out what operating systems you have installed and appear in the taskbar. Go over to the taskbar and right click on the iReboot icon and select which operating system you want to reboot into. This method will add a check mark on the operating system you want to boot into. On your next reboot the system will automatically load your choice and skip the Windows Boot Manager. If you want to reboot automatically just select “Reboot on Selection” in the iReboot menu.   To be even more productive, you can install iReboot into each Windows operating system to quickly access the others with a few simple clicks.   iReboot does not work in Linux so you will have to reboot manually. Then wait for the Windows Boot Manager to load and select your operating system.   Conclusion iReboot works on  Windows XP, Windows Vista,  and Windows 7 as well as 64 bit versions of these operating systems. Unfortunately iReboot is only available for Windows but you can still use its functionality in Windows to quickly boot up your Linux machine. A simple reboot in Linux will take you back to Windows Boot Manager. Download iReboot from neosmart.net Editor’s note: We’ve not personally tested this software over at How-To Geek, but Neosmart, the author of the software, generally makes quality stuff. Still, you might want to test it out on a test machine first. If you’ve got any experience with this software, please be sure to let your fellow readers know in the comments. Similar Articles Productive Geek Tips Restart the Ubuntu Gnome User Interface QuicklyKeyboard Ninja: 21 Keyboard Shortcut ArticlesTest Your Computer’s Memory Using Windows Vista Memory Diagnostic ToolEnable or Disable UAC From the Windows 7 / Vista Command LineSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• How to Get Windows 7 Theme Wallpapers Without Installing Them

  - by Mysticgeek

  Are you using an older version of Windows but like the Windows 7 theme wallpapers? What if you have Windows 7 but you don’t want to install the themes just to get the wallpapers? Here is how to get them without having to install themes. This guest article was written by Ryan Dozier from the Doztech tech blog. Getting the Wallpaper on XP, Vista, or Windows 7 First download and install 7-zip on your machine (link below). After you’ve installed 7-zip, download a Windows 7 theme (link below) and right-click on the theme, select 7-Zip, and Extract to “Theme Name”… A new folder will appear with the theme name on it. When you open it, there will be a folder called DesktopBackground or something similar.   Open the folder to get the wallpapers to view the wallpapers for the theme. You can delete the extra files and just keep the wallpapers!   Getting the Wallpaper on Ubuntu Extracting the wallpaper on Ubuntu can be a little tricky. Just follow these steps and you will be able to do it. First go to the Ubuntu Software Center under the Applications menu. Search for 7zip and click on the arrow to go to the applications menu. Find the Install button and click it. It will take a couple of minutes for 7zip to install. After 7zip installs, close the Ubuntu Software Center and download a Windows 7 theme. Store it somewhere you can access it quickly. Right-click on the theme and select Rename and get rid of the themepack extension and replace it with zip. The file should be “Theme Name.zip” after you rename it. Right-click on the theme and click Extract Here. After  the extracting you will have a new folder with the theme name. Open it and go into the DesktopBackground folder to get the wallpapers. You can delete the extra files and just keep the wallpapers. If you want to get the new Windows 7 Themes Wallpapers, but don’t want to search and install them separately, this is a nice workaround. Links Get 7 zip for Windows  here Get Windows 7 Themes here Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme WallpapersDesktop Fun: Forest Theme WallpapersDesktop Fun: Fantasy Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid Enhance Your Laptop’s Battery Life With These Tips Easily Search Food Recipes With Recipe Chimp

  Read the article

• Yammer, Berkeley DB, and the 3rd Platform

  - by Eric Jensen

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:major-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:major-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:major-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:major-bidi; mso-bidi-language:EN-US;} If you read the news, you know that the latest high-profile social media acquisition was just confirmed. Microsoft has agreed to acquire Yammer for 1.2 billion. Personally, I believe that Yammer’s amazing success can be mainly attributed to their wise decision to use Berkeley DB Java Edition as their backend data store. :-) I’m only kidding, of course. However, as Ryan Kennedy points out in the video I recently blogged about, BDB JE did provide the right feature set that allowed them to reliably grow their business. Which in turn allowed them to focus on their core value add. As it turns out, their ‘add’ is quite valuable! This actually makes sense to me, a lot more sense than certain other recent social acquisitions, and here’s why. Last year, IDC declared that we are entering a new computing era, the era of the “3rd Platform.” In case you’re curious, the first 2 were terminal computing and client/server computing, IIRC. Anyway, this 3rd one is more complicated. This year, IDC refined the concept further. It now involves 4 distinct buzzwords: cloud, social, mobile, and big data. Yammer is a social media platform that runs in the cloud, designed to be used from mobile devices. Their approach, using Berkeley DB Java Edition with High Availability, qualifies as big data. This means that Yammer is sitting right smack in the center if IDC’s new computing era. Another way to put it is: the folks at Yammer were prescient enough to predict where things were headed, and get there first. They chose Berkeley DB to handle their data. Maybe you should too!

  Read the article

• Move on and look elsewhere, or confront the boss?

  - by Meister

  Background: I have my Associates in Applied Science (Comp/Info Tech) with a strong focus in programming, and I'm taking University classes to get my Bachelors. I was recently hired at a local company to be a Software Engineer I on a team of about 8, and I've been told they're looking to hire more. This is my first job, and I was offered what I feel to be an extremely generous starting salary ($30/hr essentially + benefits and yearly bonus). What got me hired was my passion for programming and a strong set of personal projects. Problem: I had no prior experience when I interviewed, so I didn't know exactly what to ask them about the company when I was hired. I've spotted a number of warning signs and annoyances since then, such as: Four developers when I started, with everyone talking about "Ben" or "Ryan" leaving. One engineer hired thirty days before me, one hired two weeks after me. Most of the department has been hiring a large number of people since I started. Extremely limited internet access. I understand the idea from an IT point of view, but not only is Facebook blocked, but so it Youtube, Twitter, and Pandora. I've also figured out that they block all access to non-DNS websites (http://xxx.xxx.xxx.xxx/) and strangely enough Miranda-IM. Low cubicles. Which is fine because I like my immediate coworkers, but they put the developers with the customer service, customer training, and QA department in a huge open room. Noise, noise, noise, and people stop to chitchat all day long. Headphones only go so far. Several emails have been sent out by my boss since I started telling us programmers to not talk about non-work-related-things like Video Games at our cubicles, despite us only spending maybe five minutes every few hours doing so. Further digging tells me that this is because someone keeps complaining that the programmers are "slacking off". People are looking over my shoulder all day. I was in the Freenode webchat to get help with a programming issue, and within minutes I had an email from my boss (to all the developers) telling us that we should NOT be connected to any outside chat servers at work. Version control system from 2005 that we must access with IE and keep the Java 1.4 JRE installed to be able to use. I accidentally updated to Java 6 one day and spent the next two days fighting with my PC to undo this "problem". No source control, no comments on anything, no standards, no code review, no unit testing, no common sense. I literally found a problem in how they handle string resource translations that stems from the simple fact that they don't trim excess white spaces, leading to developers doing: getResource("Date: ") instead of: getResource("Date") + ": ", and I was told to just add the excess white spaces back to the database instead of dealing with the issue directly. Some of these things I'd like to try to understand, but I like having IRC open to talk in a few different rooms during the day and keep in touch with friends/family over IM. They don't break my concentration (not NEARLY as much as the lady from QA stopping by to talk about her son), but because people are looking over my shoulder all day as they walk by they complain when they see something that's not "programmer-looking work". I've been told by my boss and QA that I do good, fast work. I should be judged on my work output and quality, not what I have up on my screen for the five seconds you're walking by So, my question is, even though I'm just barely at my 90 days: How do you decide to move on from a job and looking elsewhere, or when you should start working with your boss to resolve these issues? Is it even possible to get the boss to work with me in many of these things? This is the only place I heard back from even though I sent out several resume's a day for several months, and this place does pay well for putting up with their many flaws, but I'm just starting to get so miserable working here already. Should I just put up with it?

  Read the article

• GWT Best Practices - MVP

  - by GWTNewbie

  A question for all the GWT gurus out there. I'm a newbie in GWT and am trying to understand the best practices of coding a GWT application. I have gone through "Large scale application development and MVP" based on Ray Ryan's talk at Google I/O 2009 and it has given me a good starting point. I downloaded the sample source code as well for the Contacts application based on the best practices listed. The application I'm trying to develop using GWT is a bit bigger (in terms of the modules involved) when compared to the sample "Contacts" application & so I want to split it up into multiple functions. I have been reading that having a single Entry point in a GWT application is a good idea, and I don't want to dump all the code in one single AppController class & one single RpcService, what would be the best approach in this situation? How would I go about dispatching the control to multiple controllers? Is there a way to achieve this using some classes in the GWT framework?

  Read the article

• Rails Nested Forms Attributes not saving if Fields Added with jQuery

  - by looloobs

  Hi I have a rails form with a nested form. I used Ryan Bates nested form with jquery tutorial and I have it working fine as far as adding the new fields dynamically. But when I go to submit the form it does not save any of the associated attributes. However if the partial builds when the form loads it creates the attribute just fine. I can not figure out what is not being passed in the javascript that is failing to communicate that the form object needs to be saved. Any help would be great. class Itinerary < ActiveRecord::Base accepts_nested_attributes_for :trips end itinerary/new.html <% form_for ([@move, @itinerary]), :html => {:class => "new_trip" } do |f| %> <%= f.error_messages %> <%= f.hidden_field :move_id, :value => @move.id %> <% f.fields_for :trips do |builder| %> <%= render "trip", :f => builder %> <% end %> <%= link_to_add_fields "Add Another Leg to Your Trip", f, :trips %> <p><%= f.submit "Submit" %></p> <% end %> application_helper.rb def link_to_remove_fields(name, f) f.hidden_field(:_destroy) + link_to_function(name, "remove_fields(this)") end def link_to_add_fields(name, f, association) new_object = f.object.class.reflect_on_association(association).klass.new fields = f.fields_for(association, new_object, :child_index => "new_#{association}") do |builder| render(association.to_s.singularize, :f => builder) end link_to_function(name, h("add_fields(this, \"#{association}\", \"#{escape_javascript(fields)}\")")) end application.js function add_fields(link, association, content) { var new_id = new Date().getTime(); var regexp = new RegExp("new_" + association, "g") $(link).parent().before(content.replace(regexp, new_id)); }

  Read the article

• Parsing XML via jQuery, nested loops

  - by Coughlin

  I am using jQuery to parse XML on my page using $.ajax(). My code block is below and I can get this working to display say each result on the XML file, but I am having trouble because each section can have MORE THAN ONE and im trying to print ALL grades that belong to ONE STUDENT. Here is an example of the XML. <student num="505"> <name gender="male">Al Einstein</name> <course cid="1">60</course> <course cid="2">60</course> <course cid="3">40</course> <course cid="4">55</course> <comments>Lucky if he makes it to lab, hopeless.</comments> </student> Where you see the I am trying to get the results to print the grades for EACH student in each course. Any ideas on what I would do? Thanks, Ryan $.ajax({ type: "GET", url: "final_exam.xml", dataType: "xml", success: function(xml) { var student_list = $('#student-list'); $(xml).find('student').each(function(){ $(xml).find('course').each(function(){ gradeArray = $(this).text(); console.log(gradeArray); }); var name = $(this).find("name").text(); var grade = $(this).find("course").text(); var cid = $(this).find("course").attr("cid"); //console.log(cid); student_list.append("<tr><td>"+name+"</td><td>"+cid+"</td><td>"+grade+"</td></tr>"); }); } });

  Read the article

• How to add and remove nested model fields dynamically using Haml and Formtastic

  - by Brightbyte8

  We've all seen the brilliant complex forms railscast where Ryan Bates explains how to dynamically add or remove nested objects within the parent object form using Javascript. Has anyone got any ideas about how these methods need to be modified so as to work with Haml Formtastic? To add some context here's a simplified version of the problem I'm currently facing: # Teacher form (which has nested subject forms) [from my application] - semantic_form_for(@teacher) do |form| - form.inputs do = form.input :first_name = form.input :surname = form.input :city = render 'subject_fields', :form => form = link_to_add_fields "Add Subject", form, :subjects # Individual Subject form partial [from my application] - form.fields_for :subjects do |ff| #subject_field = ff.input :name = ff.input :exam = ff.input :level = ff.hidden_field :_destroy = link_to_remove_fields "Remove Subject", ff # Application Helper (straight from Railscasts) def link_to_remove_fields(name, f) f.hidden_field(:_destroy) + link_to_function(name, "remove_fields(this)") end def link_to_add_fields(name, f, association) new_object = f.object.class.reflect_on_association(association).klass.new fields = f.fields_for(association, new_object, :child_index => "new_#{association}") do |builder| render(association.to_s.singularize + "_fields", :f => builder) end link_to_function(name, h("add_fields(this, \"#{association}\", \"#{escape_javascript(fields)} \")")) end #Application.js (straight from Railscasts) function remove_fields(link) { $(link).previous("input[type=hidden]").value = "1"; $(link).up(".fields").hide(); } function add_fields(link, association, content) { var new_id = new Date().getTime(); var regexp = new RegExp("new_" + association, "g") $(link).up().insert({ before: content.replace(regexp, new_id) }); } The problem with implementation seems to be with the javascript methods - the DOM tree of a Formtastic form differs greatly from a regular rails form. I've seen this question asked online a few times but haven't come across an answer yet - now you know that help will be appreciated by more than just me! Jack

  Read the article

• Rails: Should partials be aware of instance variables?

  - by Alexandre

  Ryan Bates' nifty_scaffolding, for example, does this edit.html.erb <%= render :partial => 'form' %> new.html.erb <%= render :partial => 'form' %> _form.html.erb <%= form_for @some_object_defined_in_action %> That hidden state makes me feel uncomfortable, so I usually like to do this edit.html.erb <%= render :partial => 'form', :locals => { :object => @my_object } %> _form.html.erb <%= form_for object %> So which is better: a) having partials access instance variables or b) passing a partial all the variables it needs? I've been opting for b) as of late, but I did run into a little pickle: some_action.html.erb <% @dad.sons.each do |a_son| %> <%= render :partial => 'partial', :locals => { :son => a_son } %> <% end %> _partial.html.erb The son's name is <%= son.name %> The dad's name is <%= son.dad.name %> son.dad makes a database call to fetch the dad! So I would either have to access @dad, which would be going back to a) having partials access instance variables or I would have to pass @dad in locals, changing render :partial to <%= render :partial = 'partial', :locals = { :dad = @dad, :son = a_son } %, and for some reason passing a bunch of vars to my partial makes me feel uncomfortable. Maybe others feel this way as well. Hopefully that made some sense. Looking for some insight into this whole thing... Thanks!

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85  | Next Page >