Search Results

Search found 5243 results on 210 pages for 'mirror drivers'.

Page 79/210 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Get Compiz working on x1300 ati

  - by wdkrnls

  Hi, I have Ubuntu 10.10 installed on a thinkpad T60 with an ati mobile x1300. Ubuntu isn't loading any proprietary drivers and compiz doesn't work. A google search turned up nothing. Sure, some people reported "bad performance", but I'm not getting any "performance" with compiz and these post were all for previous editions. I'm new to messing with ati drivers. Is there a way to make sure xorg-video-ati is loaded? Do I have to add any voodoo lines somewhere in /etc/X11/? Did anyone else have this problem? Thanks for your help!

  Read the article

• Second monitor stopped working

  - by Mark D

  After setting up 11.10 today, I seem to be having problems with my dual monitor set up. It worked without issues in Mint but today after I switched to 11.10 only one monitor seems to function. This seems a little odd to me. During setup both monitors functioned without issue, although they were mirroring each other both monitors but as soon as it booted into Unity my secondary monitor stopped working. I checked under settings-display and the second monitor doesn't seem to even be detected. On the off chance it had something to do with drivers, I upgraded the proprietary drivers to the latest version with zero success. If anyone has any ideas, I'd love to hear them.

  Read the article

• adjust the brightness in 13.04

  - by dinesh2707

  I have a dual graphics card: intel 4000 and nvidia 630m... I installed bumblebee and intel drivers from their website. I thought the brightness problem will be solved by installing these drivers. But, brightness works only for two steps: that is, dim, medium, high... But, it doesn't increase step wise. Can you please help me sort this problem? I'm a newbie to ubuntu and this is my first trial. So, please give me a detailed guide... Thank you :) EDIT: My model is HP DV6 7040tx. My Laptop Model

  Read the article

• Bumblebee screwd up my grafics-settings

  - by user104762

  I had my system working pretty good with the external monitor working with the displayport. Unfortunately I felt that I should try to install Bumblebee. It didn't work. The monitor wasn't recognised. So I uninstalled it with the instructions on ubuntus wiki. But it didn't get back to the way it was. And when I copied the Purge-command it started deleting other stuff to, like Cheese and whatnot. I can't get the external monitor to be recognised. If I activate Optimus I get the right settings on my laptopscreen, but no Nvidia-drivers. If I deactivate optimus I get poor resolution on my laptopscreen, and still don't recognise the external monitor. But the Nvidia-drivers show up and can be activated. Why oh why did I have to try to install Bumblebee.

  Read the article

• MySQL Connector/Net 6.4.6 Maintenance Release has been released

  - by fernando

  MySQL Connector/Net 6.4.6, a new version of the all-managed .NET driver for MySQL has been released.  This is a maintenance release and is recommended for use in production environments. It is appropriate for use with MySQL server versions 5.0-5.6. This is intended to be the final release for Connector/NET 6.4. It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.4.6 version of MySQL Connector/Net brings the following fixes: - Fix for List.Contains generates a bunch of ORs instead of more efficient IN clause in   LINQ to Entities (Oracle bug #14016344, MySql bug #64934). - Fix for error when trying to change the name of an Index on the Indexes/Keys editor; along with this fix now users can change the Index type of a new Index which could not be done   in previous versions, and when changing the Index name the change is reflected on the list view at the left side of the Index/Keys editor (Oracle bug #13613801). - Fix for stored procedure call using only its name with EF code first (MySql bug #64999, Oracle bug #14008699). - Fix for performance issue in generated EF query: .NET StartsWith/Contains/EndsWith produces MySql's locate instead of Like (MySql bug #64935, Oracle bug #14009363). - Fix for script generated for code first contains wrong alter table and wrong declaration for byte[] (MySql bug #64216, Oracle bug #13900091). - Fix for Exception thrown when using cascade delete in an EDM Model-First in Entity Framework (Oracle bug #14008752, MySql bug #64779). - Fix for Session locking issue with MySqlSessionStateStore (MySql bug #63997, Oracble bug #13733054). - Fixed deleting a user profile using Profile provider (MySQL bug #64409, Oracle bug #13790123). - Fix for bug Cannot Create an Entity with a Key of Type String (MySQL bug #65289, Oracle bug #14540202). This fix checks if the type has a FixedLength facet set in order to create a char otherwise should create varchar, mediumtext or longtext types when using a String CLR type in Code First or Model First also tested in Database First. Unit tests added for Code First and ProviderManifest. - Fix for bug "CacheServerProperties can cause 'Packet too large' error" (MySQL Bug #66578 Orabug #14593547). - Fix for handling unnamed parameter in MySQLCommand. This fix allows the mysqlcommand to handle parameters without requiring naming (e.g. INSERT INTO Test (id,name) VALUES (?, ?) ) (MySQL Bug #66060, Oracle bug #14499549). - Fixed inheritance on Entity Framework Code First scenarios. Discriminator column is created using its correct type as varchar(128) (MySql bug #63920 and Oracle bug #13582335). - Fixed "Trying to customize column precision in Code First does not work" (MySql bug #65001, Oracle bug #14469048). - Fixed bug ASP.NET Membership database fails on MySql database UTF32 (MySQL bug #65144, Oracle bug #14495292). - Fix for MySqlCommand.LastInsertedId holding only 32 bit values (MySql bug #65452, Oracle bug #14171960) by changing   several internal declaration of lastinsertid from int to long. - Fixed "Decimal type should have digits at right of decimal point", now default is 2, but user's changes in   EDM designer are recognized (MySql bug #65127, Oracle bug #14474342). - Fix for NullReferenceException when saving an uninitialized row in Entity Framework (MySql bug #66066, Oracle bug #14479715). - Fix for error when calling RoleProvider.RemoveUserFromRole(): causes an exception due to a wrong table being used (MySql bug #65805, Oracle bug #14405338). - Fix for "Memory Leak on MySql.Data.MySqlClient.MySqlCommand", too many MemoryStream's instances created (MySql bug #65696, Oracle bug #14468204). - Small improvement on MySqlPoolManager CleanIdleConnections for better mysqlpoolmanager idlecleanuptimer at startup (MySql bug #66472 and Oracle bug #14652624). - Fix for bug TIMESTAMP values are mistakenly represented as DateTime with Kind = Local (Mysql bug #66964, Oracle bug #14740705). - Fix for bug Keyword not supported. Parameter name: AttachDbFilename (Mysql bug #66880, Oracle bug #14733472). - Added support to MySql script file to retrieve data when using "SHOW" statements. - Fix for Package Load Failure in Visual Studio 2005 (MySql bug #63073, Oracle bug #13491674). - Fix for bug "Unable to connect using IPv6 connections" (MySQL bug #67253, Oracle bug #14835718). - Added auto-generated values for Guid identity columns (MySql bug #67450, Oracle bug #15834176). - Fix for method FirstOrDefault not supported in some LINQ to Entities queries (MySql bug #67377, Oracle bug #15856964). The release is available to download at http://dev.mysql.com/downloads/connector/net/6.4.html Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support!

  Read the article

• MySQL Connector/Net 6.5.5 Maintenance Release has been released

  - by fernando

  MySQL Connector/Net 6.5.5, a new maintenance release of our 6.5 series, has been released.  This release is GA quality and is appropriate for use in production environments.  Please note that 6.6 is our latest driver series and is the recommended product for development. It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.5.5 version of MySQL Connector/Net brings the following fixes: - Fix for ArgumentNull exception when using Take().Count() in a LINQ to Entities query (bug MySql #64749, Oracle bug #13913047). - Fix for type varchar changed to bit when saving in Table Designer (Oracle bug #13916560). - Fix for error when trying to change the name of an Index on the Indexes/Keys editor; along with this fix now users can change the Index type of a new Index which could not be done   in previous versions, and when changing the Index name the change is reflected on the list view at the left side of the Index/Keys editor (Oracle bug #13613801). - Fix for stored procedure call using only its name with EF code first (MySql bug #64999, Oracle bug #14008699). - Fix for List.Contains generates a bunch of ORs instead of more efficient IN clause in   LINQ to Entities (Oracle bug #14016344, MySql bug #64934). - Fix for performance issue in generated EF query: .NET StartsWith/Contains/EndsWith produces MySql's locate instead of Like (MySql bug #64935, Oracle bug #14009363). - Fix for script generated for code first contains wrong alter table and wrong declaration for byte[] (MySql bug #64216, Oracle bug #13900091). - Fix and code contribution for bug Timed out sessions are removed without notification which allow to enable the Expired CallBack when Session Provider times out any session (bug MySql #62266 Oracle bug # 13354935) - Fix for Exception thrown when using cascade delete in an EDM Model-First in Entity Framework (Oracle bug #14008752, MySql bug #64779). - Fix for Session locking issue with MySqlSessionStateStore (MySql bug #63997, Oracble bug #13733054). - Fixed deleting a user profile using Profile provider (MySQL bug #64470, Oracle bug #13790123) - Fix for bug Cannot Create an Entity with a Key of Type String (MySQL bug #65289, Oracle bug #14540202). This fix checks if the type has a FixedLength facet set in order to create a char otherwise should create varchar, mediumtext or longtext types when using a String CLR type in Code First or Model First also tested in Database First. Unit tests added for Code First and ProviderManifest. - Fix for bug "CacheServerProperties can cause 'Packet too large' error". The issue was due to a missing reading of Max_allowed_packet server property when CacheServerProperties is in true, since the value was read only in the first connection but the following pooled connections had a wrong value causing a Packet too large error. Including also a unit test for this scenario. All unit test passed. MySQL Bug #66578 Orabug #14593547. - Fix for handling unnamed parameter in MySQLCommand. This fix allows the mysqlcommand to handle parameters without requiring naming (e.g. INSERT INTO Test (id,name) VALUES (?, ?) ) (MySQL Bug #66060, Oracle bug #14499549). - Fixed inheritance on Entity Framework Code First scenarios. Discriminator column is created using its correct type as varchar(128) (MySql bug #63920 and Oracle bug #13582335). - Fixed "Trying to customize column precision in Code First does not work" (MySql bug #65001, Oracle bug #14469048). - Fixed bug ASP.NET Membership database fails on MySql database UTF32 (MySQL bug #65144, Oracle bug #14495292). - Fix for MySqlCommand.LastInsertedId holding only 32 bit values (MySql bug #65452, Oracle bug #14171960) by changing   several internal declaration of lastinsertid from int to long. - Fixed "Decimal type should have digits at right of decimal point", now default is 2, but user's changes in   EDM designer are recognized (MySql bug #65127, Oracle bug #14474342). - Fix for NullReferenceException when saving an uninitialized row in Entity Framework (MySql bug #66066, Oracle bug #14479715). - Fix for error when calling RoleProvider.RemoveUserFromRole(): causes an exception due to a wrong table being used (MySql bug #65805, Oracle bug #14405338). - Fix for "Memory Leak on MySql.Data.MySqlClient.MySqlCommand", too many MemoryStream's instances created (MySql bug #65696, Oracle bug #14468204). - Added ANTLR attribution notice (Oracle bug #14379162). - Fixed Entity Framework + mysql connector/net in partial trust throws exceptions (MySql bug #65036, Oracle bug #14668820). - Added support in Parser for Datetime and Time types with precision when using Server 5.6 (No bug Number). - Small improvement on MySqlPoolManager CleanIdleConnections for better mysqlpoolmanager idlecleanuptimer at startup (MySql bug #66472 and Oracle bug #14652624). - Fix for bug TIMESTAMP values are mistakenly represented as DateTime with Kind = Local (Mysql bug #66964, Oracle bug #14740705). - Fix for bug Keyword not supported. Parameter name: AttachDbFilename (Mysql bug #66880, Oracle bug #14733472). - Added support to MySql script file to retrieve data when using "SHOW" statements. - Fix for Package Load Failure in Visual Studio 2005 (MySql bug #63073, Oracle bug #13491674). - Fix for bug "Unable to connect using IPv6 connections" (MySQL bug #67253, Oracle bug #14835718). - Added auto-generated values for Guid identity columns (MySql bug #67450, Oracle bug #15834176). - Fix for method FirstOrDefault not supported in some LINQ to Entities queries (MySql bug #67377, Oracle bug #15856964). The release is available to download at http://dev.mysql.com/downloads/connector/net/6.5.html Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support! 

  Read the article

• PASS Summit 2011 &ndash; Part III

  - by Tara Kizer

  Well we’re about a month past PASS Summit 2011, and yet I haven’t finished blogging my notes! Between work and home life, I haven’t been able to come up for air in a bit.  Now on to my notes… On Thursday of the PASS Summit 2011, I attended Klaus Aschenbrenner’s (blog|twitter) “Advanced SQL Server 2008 Troubleshooting”, Joe Webb’s (blog|twitter) “SQL Server Locking & Blocking Made Simple”, Kalen Delaney’s (blog|twitter) “What Happened? Exploring the Plan Cache”, and Paul Randal’s (blog|twitter) “More DBA Mythbusters”.  I think my head grew two times in size from the Thursday sessions.  Just WOW! I took a ton of notes in Klaus' session.  He took a deep dive into how to troubleshoot performance problems.  Here is how he goes about solving a performance problem: Start by checking the wait stats DMV System health Memory issues I/O issues I normally start with blocking and then hit the wait stats.  Here’s the wait stat query (Paul Randal’s) that I use when working on a performance problem.  He highlighted a few waits to be aware of such as WRITELOG (indicates IO subsystem problem), SOS_SCHEDULER_YIELD (indicates CPU problem), and PAGEIOLATCH_XX (indicates an IO subsystem problem or a buffer pool problem).  Regarding memory issues, Klaus recommended that as a bare minimum, one should set the “max server memory (MB)” in sp_configure to 2GB or 10% reserved for the OS (whichever comes first).  This is just a starting point though! Regarding I/O issues, Klaus talked about disk partition alignment, which can improve SQL I/O performance by up to 100%.  You should use 64kb for NTFS cluster, and it’s automatic in Windows 2008 R2. Joe’s locking and blocking presentation was a good session to really clear up the fog in my mind about locking.  One takeaway that I had no idea could be done was that you can set a timeout in T-SQL code view LOCK_TIMEOUT.  If you do this via the application, you should trap error 1222. Kalen’s session went into execution plans.  The minimum size of a plan is 24k.  This adds up fast especially if you have a lot of plans that don’t get reused much.  You can use sys.dm_exec_cached_plans to check how often a plan is being reused by checking the usecounts column.  She said that we can use DBCC FLUSHPROCINDB to clear out the stored procedure cache for a specific database.  I didn’t know we had this available, so this was great to hear.  This will be less intrusive when an emergency comes up where I’ve needed to run DBCC FREEPROCCACHE. Kalen said one should enable “optimize for ad hoc workloads” if you have an adhoc loc.  This stores only a 300-byte stub of the first plan, and if it gets run again, it’ll store the whole thing.  This helps with plan cache bloat.  I have a lot of systems that use prepared statements, and Kalen says we simulate those calls by using sp_executesql.  Cool! Paul did a series of posts last year to debunk various myths and misconceptions around SQL Server.  He continues to debunk things via “DBA Mythbusters”.  You can get a PDF of a bunch of these here.  One of the myths he went over is the number of tempdb data files that you should have.  Back in 2000, the recommendation was to have as many tempdb data files as there are CPU cores on your server.  This no longer holds true due to the numerous cores we have on our servers.  Paul says you should start out with 1/4 to 1/2 the number of cores and work your way up from there.  BUT!  Paul likes what Bob Ward (twitter) says on this topic: 8 or less cores –> set number of files equal to the number of cores Greater than 8 cores –> start with 8 files and increase in blocks of 4 One common myth out there is to set your MAXDOP to 1 for an OLTP workload with high CXPACKET waits.  Instead of that, dig deeper first.  Look for missing indexes, out-of-date statistics, increase the “cost threshold for parallelism” setting, and perhaps set MAXDOP at the query level.  Paul stressed that you should not plan a backup strategy but instead plan a restore strategy.  What are your recoverability requirements?  Once you know that, now plan out your backups. As Paul always does, he talked about DBCC CHECKDB.  He said how fabulous it is.  I didn’t want to interrupt the presentation, so after his session had ended, I asked Paul about the need to run DBCC CHECKDB on your mirror systems.  You could have data corruption occur at the mirror and not at the principal server.  If you aren’t checking for data corruption on your mirror systems, you could be failing over to a corrupt database in the case of a disaster or even a planned failover.  You can’t run DBCC CHECKDB against the mirrored database, but you can run it against a snapshot off the mirrored database.

  Read the article

• MySQL Connector/Net 6.6.3 Beta 2 has been released

  - by fernando

  MySQL Connector/Net 6.6.3, a new version of the all-managed .NET driver for MySQL has been released.  This is the second of two beta releases intended to introduce users to the new features in the release. This release is feature complete it should be stable enough for users to understand the new features and how we expect them to work.  As is the case with all non-GA releases, it should not be used in any production environment.  It is appropriate for use with MySQL server versions 5.0-5.6. It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.6 version of MySQL Connector/Net brings the following new features:   * Stored routine debugging   * Entity Framework 4.3 Code First support   * Pluggable authentication (now third parties can plug new authentications mechanisms into the driver).   * Full Visual Studio 2012 support: everything from Server Explorer to Intellisense&   the Stored Routine debugger. Stored Procedure Debugging ------------------------------------------- We are very excited to introduce stored procedure debugging into our Visual Studio integration.  It works in a very intuitive manner by simply clicking 'Debug Routine' from Server Explorer. You can debug stored routines, functions&   triggers. These release contains fixes specific of the debugger as well as other fixes specific of other areas of Connector/NET:   * Added feature to define initial values for InOut stored procedure arguments.   * Debugger: Fixed Visual Studio locked connection after debugging a routine.   * Fix for bug Cannot Create an Entity with a Key of Type String (MySQL bug #65289, Oracle bug #14540202).   * Fix for bug "CacheServerProperties can cause 'Packet too large' error". MySQL Bug #66578 Orabug #14593547.   * Fix for handling unnamed parameter in MySQLCommand. This fix allows the mysqlcommand to handle parameters without requiring naming (e.g. INSERT INTO Test (id,name) VALUES (?, ?) ) (MySQL Bug #66060, Oracle bug #14499549).   * Fixed end of line issue when debugging a routine.   * Added validation to avoid overwriting a routine backup file when it hasn't changed.   * Fixed inheritance on Entity Framework Code First scenarios. (MySql bug #63920 and Oracle bug #13582335).   * Fixed "Trying to customize column precision in Code First does not work" (MySql bug #65001, Oracle bug #14469048).   * Fixed bug ASP.NET Membership database fails on MySql database UTF32 (MySQL bug #65144, Oracle bug #14495292).   * Fix for MySqlCommand.LastInsertedId holding only 32 bit values (MySql bug #65452, Oracle bug #14171960).   * Fixed "Decimal type should have digits at right of decimal point", now default is 2, and user's changes in     EDM designer are recognized (MySql bug #65127, Oracle bug #14474342).   * Fix for NullReferenceException when saving an uninitialized row in Entity Framework (MySql bug #66066, Oracle bug #14479715).   * Fix for error when calling RoleProvider.RemoveUserFromRole(): causes an exception due to a wrong table being used (MySql bug #65805, Oracle bug #14405338).   * Fix for "Memory Leak on MySql.Data.MySqlClient.MySqlCommand", too many MemoryStream's instances created (MySql bug #65696, Oracle bug #14468204).   * Added ANTLR attribution notice (Oracle bug #14379162).   * Fix for debugger failing when having a routine with an if-elseif-else.   * Also the programming interface for authentication plugins has been redefined. Some limitations remains, due to the current debugger architecture:   * Some MySQL functions cannot be debugged currently (get_lock, release_lock, begin, commit, rollback, set transaction level)..   * Only one debug session may be active on a given server. The Debugger is feature complete at this point. We look forward to your feedback. Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support!

  Read the article

• Not recognizing second monitor after hibernate (Windows 7, Dell D630 laptop)

  - by Brooks Moses

  I have a Dell Latitude D630 laptop which I've recently updated to Windows 7 64-bit. (The Dell site confirms that it's Windows-7-compatible.) Normally it lives in a docking station with a second monitor connected to the DVI port on the docking station, and I use the second monitor in a multi-monitor configuration with the laptop screen. Sometimes I undock the laptop and use it separately. Here's the problem: If I hibernate the laptop while undocked, and then power it back up in the docking station, it does not recognize the second monitor. By which I mean that not only does it not share the desktop onto the second monitor, but if I go into the control panel for display settings and press "Detect", it does not even detect the existence of the second monitor. I can tell it to "use the VGA port anyway" for a second monitor, but the monitor is connected to a DVI port on the docking station, so that doesn't do anything useful. If I entirely reboot the laptop while it's connected to the docking station, it has no problem recognizing the second monitor and using it. But then, if I hibernate, undock, de-hibernate while undocked and rehibernate, and then re-dock and de-hibernate, it's back to not recognizing the second monitor again. I'm reasonably certain that this is not a limitation of the hardware; this worked fine on Windows XP. I'm currently using the Windows 7 driver for my video card. I attempted to use the video driver from the Dell website for this laptop, but Dell only provides Vista 64-bit drivers, not Windows 7 64-bit drivers. Their "Windows 7 compatibility" page suggests that the Vista drivers should work, but when I attempted to install the driver, it gave me a "this operating system not supported" error and refused to install. Any further ideas?

  Read the article

• How to completely disable laptop sound?

  - by Alvaro Rodriguez

  I have a HP Pavillion DV7 laptop with win 8 pro. The laptop has an unidentified problem with sound drivers or hardware that sometimes causes volume to constantly jiggle up and down. This is very annoying because of these consequences: Renders mute unusable - as the volume changes the sound unmutes automatically Causes an annoying win 8 "surface UI" notification to appear constantly in the upper left corner, which is distracting enough by itself, but more importantly Renders the whole "surface UI" unusable, because it loses focus whenever the sound changing notification appears When the jiggling happens, the laptop also loses the ability to redirect sound to earphones - sound comes out of the speakers even if earphones are connected. To solve these issues I want to completely disable sound in the laptop (I've tried reinstalling drivers several times to no end). I have tried disabling all sound related drivers and devices in the Device Manager but Windows re-enables those automatically whenever I restart the laptop. The BIOS doesn't have any settings to disable sound hardware either. Please don't suggest having the laptop sound serviced or fixed. It's not worth the expense. I just want to remove sound support so I can use it normally. It is very unusable as it is now.

  Read the article

• Attempts at NIC teaming on Server 2008 R2 with PRO/1000 MT

  - by Klaus

  I have a Dell PowerEdge 1850 server and a gigabit switch that supports nic teaming (and was configured to do so). The server has a total of four Intel PRO/1000 MT ports, which also support teaming. But.. for some reason Intel does not actually have a version of the drivers/ProSet that will work for these cards on 2008 R2. You have to use the built-in drivers that come with 2008 R2, which do not support the additional features. According to their website, they have no plans to change this. Strangely enough, I experimented with various drivers in an attempt to force it to work. At one point, the teaming was working, but there were side effects (such as the DNS server refusing to start). So now I am back to running just one of the cards, (very) frustrated about the whole situation. I have looked all over to see if there is some way around this, but have not had any success. I know I can probably just get a new network adapter for it, but with the good deal I got, that would cost more than the server! :) While staying with 2008 R2, does anyone know of any possible alternatives? Thanks!

  Read the article

• Windows Server 2008 Remote Desktop printing blank pages

  - by Colin Pickard

  I have a Windows Server 2008 (not R2) machine which has problems with redirected printing. Clients connecting via Remote Desktop have their printers redirected and appearing for them to print to, but printing from applications on the server to local printers is giving blank pages, missing pages, or pages with headers/footers but no middle section. The issues are consistant for similar prints, but sometimes other prints and/or applications will work correctly. I have installed PDFCreator locally on the server, and the same print jobs sent by the same application appear correctly in the PDFs. Printing that PDF via the redirected printer prints correctly. I have tried the following: Installing drivers. I’ve installed several drivers different drivers, for both the client and server operating system and architecture, on the client and the server. Reinstalling the printers. I’ve tried reinstalling on remote print servers, the clients, and the host server, and tried different client machines. Granting everyone full permissions on the print spool folder on the server. Editing the registry to forward non-USB ports (http://support.microsoft.com/kb/302361) None of these have made any difference. The clients are using Windows 7 or Windows XP and none of them have any issues with printing locally. Any ideas? Thanks!

  Read the article

• Rename a Network Printer win Win 7

  - by Alex

  Seems this is a common question but the answers regularly miss the point. I have a server. Server has some printers connected. Server has all drivers for x32 & x64 OS PLUS ALL DEFAULTS set. Server also manages print queue. I have many workstations, all need to use the printers. All NEED to have drivers print queue and DEFAULTS propagated from server. Now.... When I add the printers on the workstations, I get: "ABC Printer on SERVER123" I need something less long - just "ABC Printer" So how? Tip: Please don't show me how to change the name of your locally installed printer. I know how to do this - I am particularly interested in shared printers that look like "ABC Printer on SERVER123" Tip: Installing the driver with a local port wont cut it because then I loose the server propagated defaults, the driver updates and I need to run around with driver disks/confuse trembling users with hard things like choosing drivers. I am happy for a hack if there is no official way to do this in the group policy.... I tried looking in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers on the workstation machines but those are only local printers :( I can see the network printer details on the workstations here: HKEY_USERS[Some GUID]\Printers\Connections But there is nothing obvious like a description string... Can anyone help with this?

  Read the article

• Cannot set up dual monitors correctly in Fedora15 with KDE.

  - by adivasile

  I have 2 monitors: 24" LCD connected via DVI(primary) 19" LCD connected via VGA(secondary) Everytime Fedora starts the second display is always set to clone the first one and they both run at 1280x1024 and I always have to disable the 19" monitor, in order for the bigger one to run at 1920x1080. I want to set them up so that my secondary monitor extends the primary one.The problem is that no matter what kind of configuration I choose it has no effect.My secondary monitor remains disabled. I've tried using both the Display manager from KDE and the ATI Control Panel and the behaviour is always the same.The moment I click apply, the screen flickers and nothing changes. I've succesfully used the extended setup in Fedora15 with Gnome3. I have a RadeonHD 4300 series videocard and I'm using the drivers downloaded from the AMD site. This is the output of xrandr -q : Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920 VGA-0 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.0 70.1 66.0 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 59.9 720x400 70.1 DVI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 60.0 1680x1050 59.9 1600x900 60.0 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1280x720 60.0 1152x720 60.0 1024x768 75.0 60.0 832x624 74.6 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 Later edit: The problem seems to come from the ATI drivers.I managed to set up the monitors like I wanted after I uninstalled the drivers. Unfortunately I'm working on an OpenCL project so I had to reinstall them.The moment I did that, all my previous settings were forgotten and I was back to square one.

  Read the article

• Windows 7 Users unable to add Windows 2003 server printers

  - by TravBrack

  Hi there I just rolled out a few Windows 7 x64 machines and ran into this issue where non-admin users are unable to add printers hosted on a windows 2003 server. It works fine on a 2008 server. The issue appears to be with the point and print system. A user will attempt to add the printer, a prompt will come up requiring the user to elevate privileges in order to install a driver, and will fail citing 'access denied'. I found the group policy setting Point and Print Restrictions: When the policy setting is disabled: -Windows Vista computers will not show a warning or an elevated command prompt when users create a printer connection to any server using Point and Print. So I disabled it, verified that the policy was being picked up using rsop, but it still does the same thing. I've also tried the following: Recreating the printers using newer drivers Adding the printer using 32 bit drivers on the 2003 machine, then adding the 64 bit drivers on a Windows 7 machine Adding the printer from a windows 7 machine using print management None of these things work. The security settings are no different than the working printers. Help?

  Read the article

• Windows Server 2008 R2 install reboots unexpectedly during "Completing installation" phase

  - by knda

  I am attempting to install Windows Server 2008 R2 onto a Cisco UCS C201 M2 rack mounted server but am having major difficulties and wondering if anyone has some insight or items they could recommend for me to look at to get this one resolved. Installation is being attempted via the Cisco remote console (using CIMC's Virtual dvd-rom).. following the first phase of Setup where the installation files are copied to the target hard drive, then a reboot occurs to load Setup from the HDD, mid-way in the "Completing Installation" phase the system then reboots unexpectedly. System configuration Cisco UCS C201 M2 (2RU rack mounted server) 16GB RAM, 2x 73GB 15K SAS, 4x 300GB 10k SAS Add-on cards - Intel quad-port GigE card (no fibre channel cards) Storage - LSI MegaRAID SAS 9261-8i. onboard SATA is disabled (no SATA drives connected) KVM - Belkin No physical DVD-ROM.. :( I have... Run memtest86+, no RAM faults Disabled/enabled SATA support (BIOS) Attempted install from USB DVD-ROM, no effect Attempted unattended install scripted via Cisco Configuration Manager DVD provided Removed Belkin KVM in case that was causing drama Discovered that the Cisco website is "awesome" for searching for PDFs/Drivers cough, reverted back to Google Downloaded latest LSI drivers from LSI's site and used during Server 2008 install checked Windows ISO against checksum's from MS site checked Windows ISO by using it for an install in a VM Running out of ways to troubleshoot this as I am not sure how to enable any sort of 'verbose' mode during the setup process. Next step I have planned is to remove the Intel NIC and try the installation again.. Edit: Problem was the "Cisco INTEL QUAD PT GBE" (1000/PT) .. will have to see if this card is faulty or if it's just drivers.. thanks for the help.

  Read the article

• Toshiba External Hard Drive freezes computer

  - by Ephraim

  I bought a Toshiba Canvio Basics E05A032BAU2XK Portable External 320GB 2.5 Hard Drive: My computer has two Os's on it Win7 and Win XP. I need both. The main one I use is XP. When booting my computer in any OS the computer and hard drive work fine. The same holds true for plugging in the hard drive while running Win7. However, when running WinXP, if the hard drive gets plugged in the computer freezes(my main point is that the HD is portable so it is essential that it does not do this, as I said I usually run XP). After reading some online forums I was informed that there is a compatibility issue with the newest version of Eset Smart Security(I still don't understand this because it works fine in Win7 or when connected on boot...). I disabled the AV and plugged in the HD... Walla! The comnputer did not freeze. However the disk is not recognized in explorer or disk management. In device manager I removed the device and did a scan and installation of device failed. It pretty much sounds like a driver issue but I cannot find any drivers for this HD. In fact, Toshiba claims that there are no downloadable drivers for it and that XP should take care of the drivers itself. What to do? As far as I can tell, all other USB devices work just fine on both OS. Please Help!

  Read the article

• OpenVPN, install a TAP adapter

  - by GolezTrol

  When I try to connect to my work VPN using OpenVPN, the connection fails with the message: All TAP-Win32 adapters on this system are currently in use. Many sources suggest to look in Control Panel\Network and Internet\Network Connections an enable the TAP adapter, but when I look there, there is none. Now I've run addtap.bat which is provided with OpenVPN, but I still don't get to see any TAP adapter, and logging in in VPN still fails. The output of addtap.bat is C:\Windows\system32>"C:\Program Files (x86)\OpenVPN\bin\tapinstall.exe" install "C:\Program Files (x86)\OpenVPN\driver\OemWin2k.inf" tap0801 Device node created. Install is complete when drivers are updated... Updating drivers for tap0801 from C:\Program Files (x86)\OpenVPN\driver\OemWin2k .inf. Drivers updated successfully. I've Run As Administrator both the setup of OpenVPN and addtap.bat. I've run deltapall.bat to remove any (maybe hidden) adapters. It said it removed three of them, after which I ran addtap.bat again to try to create another one. I also run OpenVPN itself as administrator. What's wrong? Running Windows 7 Home Premium on a HP Pavilion dv7 4050ed. It has worked before, but I recently had to reinstall my laptop, for which I used the restore disks I created when I just got it. Everything else seems to work fine. == UPDATE == The TAP adapter is found in Device Manager, but apparently it is disabled because it is incompatible with Windows 7 64bit. I've deïnstalled OpenVPNGui, downloaded a version that should be 64bit compatible, and installed that. Still no cigar. Then I found a tip to install OpenVPN (version 9) after installing OpenVPNGui, because that installs OpenVPN version 8. Now I got a v9 TAP driver in Device Manager, but it still doesn't work and shows up in device manager with an exclamation mark, and not at all in my network devices.

  Read the article

• During Vista Repair - No operating system is listed.

  - by Jack Marchetti

  After a Windows update, my brother's Gateway computer loads to the "Step 3 of 3: 0%" and reboots. Safe Mode does not work. I placed a Vista DVD in the drive, and re-booted. (Note, this is my Vista DVD, not the Recovery/System disc that would come with a computer. Gateway does not give you CD's anymore. I believe they store recovery on a partition, but that partition has been wiped out). I chose "Repair Your Computer" I get a dialog box, but no operating system is listed. I'm then prompted to "Load Drivers". What drivers am I supposed to be loading here and where from? I placed a CD in the drive to "load drivers" but I don't see my DVD drive listed. All I saw where X:/Sources along with several Removable Media slots that were empty. On another screen I tried Startup Repair, which didn't do anything. I attempted to use System Restore - but it doesn't detect the hard drive. I'm guessing that I'm missing some sort of SATA driver and that is why the hard disk is not being found. Any ideas on this?

  Read the article

• Windows 7 x64 RTM USB Port Has Power But Won't Recognize Mouse/Keyboard/Anything

  - by ben

  I have an odd error that doesn't seem to fit in with any of the other odd Windows 7 x64 USB errors that have been kicked up on Google. Here we go: Uninstalled Tortoise SVN and clicked restart computer. My machine had been up for around 28 days On reboot my mouse and keyboard failed to work anymore, couldn't log in. Tried every USB port I have on my Dell 390 and the ports on my Dell 19's, nothing worked. They had power but Windows would not respond when I manipulated the keyboard/mouse. Rebooted my computer and pressed F2 to get into bios, my keyboard is working fine in bios. Keyboard and mouse work fine on other computers when using USB. Found adapters for keyboard and mouse to convert from USB to PS/2 ports, works fine. I'm actually typing this question on the same keyboard, same computer, just using PS/2 ports for my mouse and keyboard. It appears to be a Windows 7 x64 issue. Other things I have tried: Multiple other mice and keyboards, iphone, all with no luck. Each one gets power, but Windows never tries to install drivers or sees that they are connected. Uninstall and reinstall all USB drivers. Drives uninstall and reinstall fine and report no errors in Control Panel. In Power Management I disallow Windows from turning off USB ports to save power Installed the latest nVidia drivers for my graphics card, no change. Anyplace else I can look/try? Thanks!

  Read the article

• Constant crashes in windows 7 64bit when playing games

  - by yx

  I've tried everything I can possibly think of in trying to fix this problem and I'm totally out of ideas, so any help would be appreciated: The problem: whenever I fire up a game, it works for a short while with no problems and then it would crash. Either its a hard crash, forcing me to reboot, or windows would report that the display driver has stopped working and recovered. Here is a list of things I've already tried: Drivers - tried the latest drivers (catalyst 9.12) as well as the stock drivers that came with the video card. Also have the latest BIOS/chipset Memtest - Ran Memtest86+ overnight, had no problems, the windows diagnostic tool also does not find any problems. Overheating - Video card/cpu temperatures are well below peak (42 and 31 Celsius receptively) PSU Voltage - CPUID shows that the voltage levels are all above what they should be. The PSU itself is only roughly 16 months old and is a good model. HDD - No errors when checked GPU - Brand new (replaced previous card since I thought it was the problem, apparently not) Overclocking - Everything is at stock levels, memory voltage is set to manufacturer's standard Specs: Motherboard: ASUS P5Q Pro CPU: Core 2 Duo E8400 3.0 ghz OS: Windows 7 home premium 64 bit Memory: Mushkin Enhanced 4GB DDR2 GPU: Sapphire HD 5850 1GB PSU: SeaSonic M12 600W ATX12V DirectX: DX11 Event Viewer after a crash always has these logged: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 1 The details view of this entry contains further information. A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 0 The details view of this entry contains further information. A previous card that I had (4850x2) also had these errors, so I changed video cards, but the same thing is happening.

  Read the article

• Ubuntu 10.04 freezing and Ctrl + Alt + Backspace does nothing but music keeps playing

  - by Bryce Thomas

  I'm having intermittent problems where the screen will freeze in Ubuntu. I've tried using Ctrl + Alt + Backspace to restart the X-server, though this does nothing. When the freeze occurs, there's a small square of black dashes around the mouse pointer - maybe 1 inch in size. These dashes look a lot like a 2d barcode. The rest of the screen looks normal, but I can't move the mouse and none of the keyboard shortcuts work to do anything. However, music that I begin playing before the freeze continues to play, which seems to indicate it hasn't stalled up completely. I've noticed a similar freezing problem when I'm using Windows 7. That is, I see the same barcode like dashes around the mouse pointer when it freezes up. So I'm guessing it's either a driver or hardware problem. I thought if it was a hardware problem though, the whole computer might stop working (i.e. music would stop playing)? The video card I am using is an Nvidia, and I believe it's in the 7600 range. In Ubuntu I have the drivers for the card set to the latest available (proprietary). Ideally I'd like to be able to continue using the proprietary drivers. Is there any known issues with the drivers for this model graphics card, or has anyone experienced the same problem and knows how to fix it?

  Read the article

• Intel ICH9/10R raid 5 drive failure

  - by davpen

  About a year ago I was using the native Intel ICH9R Raid 5 an Intel P35 based motherboard. The system was running Vista x64 and when one of the drives failed Vista blue screened on boot until I had figured out which drive had failed and removed it (a rather nerve racking hit and miss affair). The same thing happened some months later on another similar system so it wasn't a once off. This wasn't the robust raid 5 drive failure behavior that I would have hoped for and expected. I moved to Highpoint Rocketraid 2300 and haven't had any problems although I have yet to have a drive fail with this set up. But I am now looking to build a new system based on an i7 and Windows 7. At the moment Highpoint doesn't have drivers for Windows 7 so I am considering moving back to the on board Intel Raid. Yes I know I that I might get away with using the Vista drivers but I don't really want to take that chance with critical data. The question then is has anyone else experienced a drive failure with Intel raid and how did the OS and drivers handle it? Is it safe to go back?

  Read the article

• Synaptics touchpad stops working randomly

  - by Jus12

  I have two laptops. One dell Vostro and other Vaio Z. Both have Synaptics (Yes, I have checked, and the original drivers were from Synaptics as well). On both laptops, the touchpad scrolling stops working at some arbitrary time and nothing seems to solve it except a reboot. Sometimes, it randomly starts working again. I have downloaded all latest drivers from OEM. Interestingly, when I run a program as Administrator, scrolling works in that window only. This problem is very odd. It happens without any reason and I've not been able to find a fix for more than a year. I have seen some unusual suggestions on forums (e.g., to "restore windows to a previous working state") but never any fix that solves this issue properly. I have tried installing latest drivers and I DO NOT want to restore windows to a previous working configuration. OS: Windows 7 64 bit Professional (Sony Vaio Z - VPCZ128GG) Windows 7 32 bit Professional (Dell) Edit: Temporary solution is to uninstall the synaptics driver and let Windows 7 use its default built in one. However, I really prefer the Synaptic driver because it activates the scroll button rather than the mouse wheel (useful in some apps such as MS Photo Editor)

  Read the article

• How do I stop panning on a monitor that supports a specific resolution?

  - by IronicMuffin

  Hi all, I've been battling this for a few days now. Any and all help is appreciated. I have a planar monitor with a native res of 1280x1024. At one point, I had used PowerStrip to override "something" and set the res to 1600x1200, and it worked great. I then installed new intel graphics drivers for my 86895g (or w/e model) video card, which screwed up whatever settings I had. If I set it to 1600x1200 this time, it would set the res correctly, but give me a 1280x1024 viewport and the screen would pan when the mouse got to the edges of the screen. Absolutely not useful. Ok, so I was limited to 1280x1024 now. W/e. Now...enter new video card with two video ports. I have two monitors now and the latest nVidia drivers. I decide to try to get dual 1600x1200 going...ended up screwing the original monitor up so much now that it's at 1280x1024, with a 1024x768 viewport and panning! Absolutely not usable now. So what I need, and I can't seem to find on any forums, is help doing one or more of the following: Clearing out all monitor/edid info out of the windows registry without corrupting the registry. Actually correctly override the EDID values and get my sweet res back. Some other way of getting back to at least dual 1280x1024 with NO panning. Note: My device manager shows 4 monitors for some reason. My registry shows entries for all sorts of monitors that have been hooked up to the machine over the years. It's making it difficult to debug. Experience with PowerStrip would be helpful. I've been mucking with Phoenix EDID designer and MonInfo as well, but I'm stumbling around in the dark with these. Windows XP SP2 nVidia GeForce 6200 nVidia drivers: v258.96 Monitor: Planar PL 1910M Thanks!

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >