Search Results

Search found 3004 results on 121 pages for 'plain'.

Page 79/121 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

  • Postfix not working

    - by user1488723
    A while ago I installed the postfix mail server on my ubuntu 10.04 VPS. At the time it was working good but now it's just stopped working. I was trying to enable SASL authentification and somewhere it must have went really wrong. I've studied the postfix main.cf and done everything in an orderly fashion to ensure that it is nothing wrong. I also have Dovecot installed and configured dovecot.conf to run with Postfix. If I try to do telnet localhost 25 while logged in on the server I just get: Connection closed by foreign host. If I try to do telnet mail.example.com 25 "from the outside" I get: telnet: Unable to connect to remote host: No route to host And when I check the server log after the failed attempts I see this: Jun 28 15:49:31 msv postfix/smtpd[11839]: initializing the server-side TLS engine Jun 28 15:49:31 msv postfix/smtpd[11839]: connect from localhost.localdomain[127.0.0.1] Jun 28 15:49:31 msv postfix/smtpd[11839]: warning: SASL: Connect to /var/spool/postfix/private/auth failed: Connection refused Jun 28 15:49:31 msv postfix/smtpd[11839]: fatal: no SASL authentication mechanisms Jun 28 15:49:32 msv postfix/master[11598]: warning: process /usr/lib/postfix/smtpd pid 11839 exit status 1 Jun 28 15:49:32 msv postfix/master[11598]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling main.cf file looks like this: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no delay_warning_time = 4h myhostname = mail.example.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydomain = example.com myorigin = $mydomain mydestination = $mydomain relayhost = mynetworks = 127.0.0.1 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all smtpd_use_tls = yes smtpd_tls_loglevel = 2 smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_sasl_auth_enable = yes smtpd_client_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = /var/spool/postfix/private/auth smtpd_sasl_security_options = noanonymous Dovecot.conf file looks like this: protocols = imap imaps disable_plaintext_auth = no log_timestamp = "%b %d %H:%M:%S " ssl = yes ssl_cert_file = /etc/postfix/ssl/smtpd.crt ssl_key_file = /etc/postfix/ssl/smtpd.key mail_location = maildir:~/mail mail_access_groups = mail auth_username_chars = abcdefghijklmnopqrstuvwxyz protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep } auth default { mechanisms = plain login passdb pam { } userdb passwd { } socket listen { client { path = /var/spool/postfix/private/auth user = postfix group = postfix mode = 0660 } } }

    Read the article

  • Optimize apache for 10K+ wordpress views a day on 2GB RAM E6500 CPU

    - by Broke artist
    I have a dedicated server with apache/php on ubuntu serving my Wordpress blog with about 10K+ pageviews a day. I have W3TC plug in installed with APC. But every now and then server stop responding or goes dead slow and i have to restart apache to get it back. Heres my config what am i doing wrong? ServerRoot "/etc/apache2" LockFile /var/lock/apache2/accept.lock PidFile ${APACHE_PID_FILE} TimeOut 40 KeepAlive on MaxKeepAliveRequests 200 KeepAliveTimeout 2 StartServers 5 MinSpareServers 5 MaxSpareServers 8 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 StartServers 3 MinSpareServers 3 MaxSpareServers 3 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 StartServers 3 MinSpareServers 3 MaxSpareServers 3 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess Order allow,deny Deny from all Satisfy all DefaultType text/plain HostnameLookups Off ErrorLog /var/log/apache2/error.log LogLevel error Include /etc/apache2/mods-enabled/.load Include /etc/apache2/mods-enabled/.conf Include /etc/apache2/httpd.conf Include /etc/apache2/ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %O" common LogFormat "%{Referer}i - %U" referer LogFormat "%{User-agent}i" agent CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined Include /etc/apache2/conf.d/ Include /etc/apache2/sites-enabled/

    Read the article

  • Email encoding on IIS7

    - by Ivanhoe123
    All emails sent from the server are displaying Cyrillic letters as weird characters, for example: Можно. Regular alphabet letters are properly rendered. I searched all across the web but was not able to find any solutions. Here is some information about the system: Dedicated server with Windows 2008 and IIS7 Application are in PHP (run as FastCGI) If of any importance, Smartermail is installed on the server The emails are sent using PHPs mail() function through a Drupal website. Encoding on that site is set up properly and there are no display issues on front end. Where is the problem? How can I make Cyrillic letters to be properly encoded? Any help is greatly appreciated. Thanks! UPDATE Here are the email headers: Received: from SERVERNAME (mail.domain.com [12.123.123.123]) by mail.domain.com with SMTP; Fri, 16 Nov 2012 00:00:00 +0100 From: [email protected] To: [email protected] Subject: Email subject Date: Fri, 16 Nov 2012 00:00:00 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable X-Mailer: Drupal Sender: [email protected] Return-Path: [email protected] Message-ID: f98b801988c642ef911ef46f7cace92b@com X-SmarterMail-Spam: SPF_None, ISpamAssassin 8 [raw: 5], DK_None, DKIM_None, Custom Rules [] X-SmarterMail-TotalSpamWeight: 8

    Read the article

  • How can I configure apache to cache the images that it is serving? Right now it is giving headers t

    - by Tchalvak
    Serving up images that don't seem to cache There's a LAPP (postgresql instead of mysql) running over on http://ninjawars.net. I just recently noticed that images don't seem to be caching with any kind of good frequency as I was reloading a page with a few images on it here: http://www.ninjawars.net/attack_player.php Here is an example image (they're probably all being served exactly the same): http://www.ninjawars.net/images/characters/fighter.png Checking the header, it seems that the caching is set to: Cache-Control:max-age=0 (the full header for this image-like-all-the-others is... Request URL:http://www.ninjawars.net/images/characters/fighter.png Request Method:GET Status Code:200 OK Request Headers Accept:application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,/;q=0.5 Cache-Control:max-age=0 Referer:http://www.ninjawars.net/images/characters/fighter.png User-Agent:Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.3 Safari/533.4 Response Headers Accept-Ranges:bytes Content-Length:938 Content-Type:image/png Date:Thu, 13 May 2010 21:24:07 GMT ETag:"ffd4d-3aa-4837efc120540" Last-Modified:Mon, 05 Apr 2010 15:28:45 GMT Server:Apache ) So what modules or config or htaccess or whatever do I change to have it cache images, e.g. for 24 hours?

    Read the article

  • Cable management techniques

    - by cornjuliox
    How do you manage the giant jungle of cables behind your PC? When you have 2 or more PCs next to each other, you wind up with this giant mess cables that's a pain in the neck to clean especially when both computers are running 24/7 and any fidgeting with the cables is likely to cause data loss and/or angry users. So far I've tried masking tape, cable ties and plain old string but none have been very effective. The masking tape kept the cables in place, but over time they ended up leaving this awful sticky residue on the sides of the cables that just won't come off gets all over your fingers and is horrible horrible horrible. I have nightmares about that stuff. We used cable ties and 'folded' up some of the longer cables so that they weren't any longer than they needed to be, but this meant that the position of some of our devices like the keyboard and the mouse were essentially 'fixed' until we removed the ties. The string didn't work much differently and required that we tie them properly or risk it coming loose. I would switch to a wireless keyboard and mouse, but I don't want to have to deal with the added expense of batteries, even the rechargable ones. Plus I don't want them to die on me at a crucial moment (happened to me once while playing Firearms _<). How do large offices and data centers manage their masses of cable?

    Read the article

  • Cable management techniques

    - by cornjuliox
    How do you manage the giant jungle of cables behind your PC? When you have 2 or more PCs next to each other, you wind up with this giant mess cables that's a pain in the neck to clean especially when both computers are running 24/7 and any fidgeting with the cables is likely to cause data loss and/or angry users. So far I've tried masking tape, cable ties and plain old string but none have been very effective. The masking tape kept the cables in place, but over time they ended up leaving this awful sticky residue on the sides of the cables that just won't come off gets all over your fingers and is horrible horrible horrible. I have nightmares about that stuff. We used cable ties and 'folded' up some of the longer cables so that they weren't any longer than they needed to be, but this meant that the position of some of our devices like the keyboard and the mouse were essentially 'fixed' until we removed the ties. The string didn't work much differently and required that we tie them properly or risk it coming loose. I would switch to a wireless keyboard and mouse, but I don't want to have to deal with the added expense of batteries, even the rechargable ones. Plus I don't want them to die on me at a crucial moment (happened to me once while playing Firearms _<). I know that there are people out there with home/office networks a thousand times more convoluted than mine, so

    Read the article

  • dovecot/postfix: can send & receive via webmin, however squirrel mail and outlook fail to connect

    - by Jonathan
    I have just finished setting up dovecot and postfix on my server (centos 5.5/apache) earlier today. So far I've been able to get email working through webmin (can send/receive to and from external domains). However, attempting to telnet xxx.xxx.xx.xxx 110 returns the following errors: Connected to xxx.xxx.xx.xxx. Escape character is '^]'. +OK Dovecot ready. USER mailtest +OK PASS ********* +OK Logged in. -ERR [IN-USE] Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2011-02-11 22:55:48] Connection closed by foreign host. Which further logs the following error dovecot: Feb 11 21:32:48 Info: pop3-login: Login: user=, method=PLAIN, rip=::ffff:xxx.xxx.xx.xxx, lip=::ffff:xxx.xxx.xx.xxx, TLS dovecot: Feb 11 21:32:48 Error: POP3(mailtest): stat(/home/mailtest/MailDir/cur) failed: Permission denied dovecot: Feb 11 21:32:48 Error: POP3(mailtest): stat(/home/mailtest/MailDir/cur) failed: Permission denied dovecot: Feb 11 21:32:48 Error: POP3(mailtest): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2011-02-11 21:32:48] dovecot: Feb 11 21:32:48 Info: POP3(mailtest): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 Also, when attempting to login to squirrelmail or access the account via thunderbird/live mail etc, it obviously fails with a similar issue. Any suggestions or outside thinking on this would be a massive help! I've pretty much exhausted every resource, and tried every suggestion for my dovecot.conf file, but so far nothing seems to work :( I feel like it may be a permissions/ownership issue, but i'm lost as to specifics.

    Read the article

  • Can I disable this Windows (XP) Security Warning?

    - by FumbleFingers
    I recently reformatted my hard drive and reinstalled Windows XP (I know I'll have to take the plunge and commit to Win8 "real soon, now", but I'm just not quite ready for the upheaval yet! :) I used to use WinRar (and later, when I got fed up with the "nag" messages, 7-Zip), but I haven't installed either of them in my new configuration, so I must be using the built-in XP facility when I open *.zip files. For years, I've been opening downloaded *.zip archives, and using "drag & drop" to copy to a File Explorer window open on the folder where I want the files to end up (usually, My Documents\Downloads). But now I find that when I "drop" the file(s), I get a pop-up Windows Security Warning saying Are you sure you want to copy or move files to this folder? You should only move or copy files from locations that you trust Can anyone explain why I'm getting this message, and is there any (reasonably easy, please! :) way to suppress it? Since I've already put the *.zip file on my computer, it seems a bit late to ask if I trust it. (Thus far, the files in question have always been plain text, so it's not a matter of dodgy programs, etc.) Apologies for the low quality image - I don't have the appropriate tools or knowledge to do any better, and it doesn't help that my "PrtScr" screen capture has included what would have been on my second monitor (TV) if it had been turned on. If you can't read it, trust me - I have copied the text verbatim.

    Read the article

  • Dovecot unable to perform mysql query

    - by NathanJ2012
    I have been following the ISPMail tutorials on workaround.org (the 2.9 Wheezy version) and thus far everything has been working fine. When I reached the step to "Testing email delivery" step I noticed a error about the query in the output log from /var/log/mail.log. May 14 06:48:59 mail postfix/pickup[17704]: EA4AD240A98: uid=0 from=<root> May 14 06:48:59 mail postfix/cleanup[17776]: EA4AD240A98: message-id=<[email protected]> May 14 06:48:59 mail postfix/qmgr[17706]: EA4AD240A98: from=<[email protected]>, size=429, nrcpt=1 (queue active) May 14 06:49:00 mail dovecot: auth-worker(17782): mysql(127.0.0.1): Connected to database mailserver May 14 06:49:00 mail dovecot: auth-worker(17782): Warning: mysql: Query failed, retrying: Table 'mailserver.users' doesn't exist May 14 06:49:00 mail dovecot: auth-worker(17782): Error: sql([email protected]): User query failed: Table 'mailserver.users' doesn't exist (using built-in default user_query: SELECT home, uid, gid FROM users WHERE username = '%n' AND domain = '%d') May 14 06:49:00 mail dovecot: lda([email protected]): msgid=<[email protected]>: saved mail to INBOX May 14 06:49:00 mail postfix/pipe[17780]: EA4AD240A98: to=<[email protected]>, relay=dovecot, delay=0.09, delays=0.03/0.01/0/0.06, dsn=2.0.0, status=sent (delivered via dovecot service) May 14 06:49:00 mail postfix/qmgr[17706]: EA4AD240A98: removed I found this rather interesting that it isn't finding the DB so I went back through and checked EVERY file that I touched that involved the DB (including the postfix cf files) and everything is correct so I am baffled at this point, but oddly enough it would seem the email still made it to the correct destination in /var/vmail/domain.com/. Should I be worried about this or am I missing something here? Since it is a message from dovecot it would be the query from dovecot-sql.conf.ext which I am including here driver = mysql connect = host=127.0.0.1 dbname=mailserver user=blocked password=***REMOVED*** default_pass_scheme = PLAIN-MD5 password_query = SELECT email as user, password FROM virtual_users WHERE email='%u';

    Read the article

  • Broke NetBeans file associations in Windows XP how do I get them back?

    - by Serhiy
    Hello... I broke my file association in XP... Does anyone have any clue how to fix it? When I right click and select Open With... the application I want to use (NetBeans) to open the file is not on the list... and when I browse for it it won't let me select it (well it does but then won't add it to the list). The way I broke it is by installing 6.7 and then uninstalling 6.5.... since then my file associations have all been broken. I even tried uninstalling NetBeans and reinstalling it again... no luck... I even went as far as adding my own action called "OpenIt" to the file types I wanted... and that works... but only if the file/folders that contain in don't have any spaces... otherwise NetBeans throws a ".....does not exist, or is not a plain file". Thus nothing off the desktop can be opened... Does anyone know of how I can fix this problem? Thanks.

    Read the article

  • How to setup Python with Lighttpd and FastCGI (like PHP)

    - by johndir
    Running Lighttpd on Linux, I would like to be able to execute Python scripts just the way I execute PHP scripts. The goal is to be able to execute arbitrary script files stored in the WWW directory, e.g. http://www.example.com/*.py. I would not like to spawn a new Python instance (interpreter) for every request (like done in regular CGI, if I'm not mistaken), which is why I'm using FastCGI. Following Lighttpd's documentation, the following is the FastCGI part of my config file. The problem is that it always runs the /usr/local/bin/python-fcgi script for every *.py file, regardless of the content of that file: http://www.example.com/script.py [output=>] "python-fcgi: test" (regardless of the content of script.py) I'm not interested in using any framework, but simply executing individual [web] scripts. How can I make it act like PHP, executing any script in the WWW directory by requesting it's path? /etc/lighttpd/conf.d/fastcgi.conf: server.modules += ( "mod_fastcgi" ) index-file.names += ( "index.php" ) fastcgi.server = ( ".php" => ( "localhost" => ( "bin-path" => "/usr/bin/php-cgi", "socket" => "/var/run/lighttpd/php-fastcgi.sock", "max-procs" => 4, # default value "bin-environment" => ( "PHP_FCGI_CHILDREN" => "1", # default value ), "broken-scriptfilename" => "enable" ) ), ".py" => ( "python-fcgi" => ( "socket" => "/var/run/lighttpd/fastcgi.python.socket", "bin-path" => "/usr/local/bin/python-fcgi", "check-local" => "disable", "max-procs" => 1, ) ) ) /usr/local/bin/python-fcgi: #!/usr/bin/python2 def myapp(environ, start_response): start_response('200 OK', [('Content-Type', 'text/plain')]) return ['python-fcgi: test\n'] if __name__ == '__main__': from flup.server.fcgi import WSGIServer WSGIServer(myapp).run()

    Read the article

  • wget is working only when used with sudo

    - by Yusuf
    I'm having quite a strange behavior with wget since yesterday. I can download files by using sudo wget, but when I try the same file with only wget, I can get this error: yusufh@ubuntu-yuh:~$ wget http://www.kegel.com/wine/winetricks --2010-12-17 09:34:11-- http://www.kegel.com/wine/winetricks Resolving www.kegel.com... failed: Name or service not known. wget: unable to resolve host address `www.kegel.com' and with sudo wget: yusufh@ubuntu-yuh:~$ sudo wget http://www.kegel.com/wine/winetricks --2010-12-17 09:35:37-- http://www.kegel.com/wine/winetricks Connecting to 127.0.0.1:5865... connected. Proxy request sent, awaiting response... 200 OK Length: 190672 (186K) [text/plain] Saving to: `winetricks' 100%[==================================================================================================>] 190,672 --.-K/s in 0.03s 2010-12-17 09:35:37 (6.92 MB/s) - `winetricks' saved [190672/190672] After the comments below, here is an update: I can use Google Chrome or Firefox perfectly without running it as root. I use ntlmaps to connect to the office proxy. So I need to use 127.0.0.1:5865 as the proxy for clients. Result for env | grep -i proxy: NO_PROXY=localhost,127.0.0.0/8,*.local, http_proxy=127.0.0.1:5865 ftp_proxy=127.0.0.1:5865 all_proxy=socks://127.0.0.1:5865/ ALL_PROXY=socks://127.0.0.1:5865/ https_proxy=127.0.0.1:5865 no_proxy=localhost,127.0.0.0/8,*.local while sudo env | grep -i proxy is empty! HELP!

    Read the article

  • "Delivered-To" Header in Exchange

    - by Kaii
    In some SMTP server implementations (i.e. Postfix) you can enable Delivered-To and X-Original-To headers that will be added to your email. (or [X-]Envelope-To) This is very helpful with distribution lists to determine which e-mail address the mail has been redirected to. So, when the mail has been sent to [email protected], you can see in the Delivered-To or Envelope-To header that it has been redirected (distributed) to [email protected], which is one of many other e-mail addresses that are linked to a single mailbox. How do I find which address was used to deliver this mail to a specific mailbox on Microsoft Exchange 2010? Looking at the plain message (with all headers) i can not find any information that the mail arrived via address [email protected] I think I need the Delivered-To header (or a similar one) to be set on Microsoft Exchange when a mail is delivered via distribution lists. Is there any way to enable such header in Exchange 2010? I need it so that our Ticket system (OTRS) correctly recognizes where the ticket belongs to. Adding all the e-mail addresses of all distribution lists to the system configuration is not the right solution. And if there is a solution for Exchange 2010, is this possibly also applicable to Exchange 2007?

    Read the article

  • nginx: how do I add new site/server_name in nginx?

    - by Neo
    I'm just starting to explore Nginx on my Ubuntu 10.04. I installed Nginx and I'm able to get the "Welcome to Nginx" page on localhost. However I'm not able to add a new server_name, even when I make the changes in site-available/default file. Tried reloading/restarting Nginx, but nothing works. One interesting observation. "http://mycomputername" in browser works. So somehow there is a command like 'server_name $hostname' somewhere over-riding my rule. File: sites-available/mine.enpass server { listen 80; server_name mine.enpass ; access_log /var/log/nginx/localhost.access.log; location / { root /var/www/nginx-default; index index.html index.htm; } } File: nginx.confg user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; }

    Read the article

  • How to add Sharepoint Powershell to Console2

    - by BGM
    Salvete! I want to add the Powershell Console for Sharepoint to the tablist in Console2. I already have plain Powershell, but I want the Sharepoint Powershell snapin added automatically. If I look at the properties of the Sharepoint Powershell Console shortcut, I see this: C:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe -NoExit " & ' C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG\POWERSHELL\Registration\\sharepoint.ps1 ' " but that doesn't work in Console2, so I tried this, which doesn't work either: C:\WINDOWS\system32\windowspowershell\v1.0\powershell.exe -PSConsoleFile "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG\POWERSHELL\Registration\psconsole.psc1" -NoExit " & ' C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG\POWERSHELL\Registration\\sharepoint.ps1 ' " Whenever I try, it will load Powershell, but not the Sharepoint Console. I get this: Add-PSSnapin : The Windows PowerShell snap-in 'Microsoft.SharePoint.PowerShell' is not installed on this machine. At C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG\POWERSHELL\Registration\SharePoint.ps1:3 char:13 + Add-PsSnapin <<<< Microsoft.SharePoint.PowerShell + CategoryInfo : InvalidArgument: (Microsoft.SharePoint.PowerShell:String) [Add-PSSnapin], PSArgumentException + FullyQualifiedErrorId : AddPSSnapInRead,Microsoft.PowerShell.Commands.AddPSSnapinCommand I tried this out, too. Anybody know?

    Read the article

  • Why is my Drupal Registration email considered spam by gmail? (headers included)

    - by Jasper
    I just created a Drupal website on a uni.cc subdomain that is brand-new also (it has barely had the 24 hours to propagate). However, when signing up for a test account, the confirmation email was marked as spam by gmail. Below are the headers of the email, which may provide some clues. Delivered-To: *my_email*@gmail.com Received: by 10.213.20.84 with SMTP id e20cs81420ebb; Mon, 19 Apr 2010 08:07:33 -0700 (PDT) Received: by 10.115.65.19 with SMTP id s19mr3930949wak.203.1271689651710; Mon, 19 Apr 2010 08:07:31 -0700 (PDT) Return-Path: <[email protected]> Received: from bat.unixbsd.info (bat.unixbsd.info [208.87.242.79]) by mx.google.com with ESMTP id 12si14637941iwn.9.2010.04.19.08.07.31; Mon, 19 Apr 2010 08:07:31 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of [email protected] designates 208.87.242.79 as permitted sender) client-ip=208.87.242.79; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of [email protected] designates 208.87.242.79 as permitted sender) [email protected] Received: from nobody by bat.unixbsd.info with local (Exim 4.69) (envelope-from <[email protected]>) id 1O3sZP-0004mH-Ra for *my_email*@gmail.com; Mon, 19 Apr 2010 08:07:32 -0700 To: *my_email*@gmail.com Subject: Account details for Test at YuGiOh Rebirth MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed; delsp=yes Content-Transfer-Encoding: 8Bit X-Mailer: Drupal Errors-To: info -A T- yugiohrebirth.uni.cc From: info -A T- yugiohrebirth.uni.cc Message-Id: <[email protected]> Date: Mon, 19 Apr 2010 08:07:31 -0700 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - bat.unixbsd.info X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [99 500] / [47 12] X-AntiAbuse: Sender Address Domain - bat.unixbsd.info X-Source: X-Source-Args: /usr/local/apache/bin/httpd -DSSL X-Source-Dir: gmh.ugtech.net:/public_html/YuGiOhRebirth

    Read the article

  • Mac OS X duplex printing problem: one- vs. multi-paged documents

    - by Christian Lindig
    I like to print on pre-printed stationery using the Preview.app and a duplex-capable HP Color Laserjet 4700 (PostScript) printer. The print dialog handles one and two-paged documents differently: the paper needs to be placed differently into the tray if the document contains one page versus when it contains two pages. This is not obvious when printing on plain paper but becomes obvious when front and reverse side of sheets are marked. Otherwise the first page would end up on the reverse side of the first sheet. I believe the problem is caused by the printer driver setting duplex printing to false (using the PostScript setpagedevice operator) when emitting a single-page document versus keeping it set to true when emitting multi-page documents. All this despite that duplex printing is always specified in the printer dialog. When printing a single-sided document, duplex=true and duplex=false seem to make a difference with respect which side of a sheet gets printed on. It would be also helpful if others could confirm the problem actually exists. I suspect this problem is not limited to specific printers. I'm on OS X 10.6 and I checked two different HP printers.

    Read the article

  • Window 7 Host does not answer to ping

    - by gencha
    Today I tried printing on a shared printer on one of our homegroup members. Sadly it did not work (printer marked as offline). Shortly after, I noticed I can't even ping the machine that owns the printer (I also can not remotely access it in any other way I've tried). Currently I'm trying to ping the machine from the router both computers are connected to (and my machine in question doesn't answer). I do receive the echo requests (as verified with WireShark). I also added a rule in the Windows Firewall to specifically allow ICMP echo requests, but that didn't change anything. I also tried netsh firewall set icmpsetting 8 enable, but that didn't change anything either. Completely disabling the Windows Firewall has no effect on the issue either. One has to wonder, where does Windows log when and why it ignored any incoming packets? How can I get to the bottom of this? Here are some ways I found to dig deeper into the issue: Enabling logging on the Windows Firewall Enabling Windows Filtering Platform Auditing Both methods at least give more insight into the issue. The plain log file is full of entries like this: 2011-11-11 14:35:27 DROP ICMP 192.168.133.1 192.168.133.128 - - 84 - - - - 8 0 - RECEIVE So the ICMP packets are being dropped as if that was intended. The Event Viewer now gives a little bit more details: The Windows Filtering Platform has blocked a packet. Application Information: Process ID: 4 Application Name: System Network Information: Direction: Inbound Source Address: 192.168.133.1 Source Port: 0 Destination Address: 192.168.133.128 Destination Port: 8 Protocol: 1 Filter Information: Filter Run-Time ID: 214517 Layer Name: Receive/Accept Layer Run-Time ID: 44 This same entry is always repeated with 2 points of information changing: Process ID: 420 Application Name: \device\harddiskvolume2\windows\system32\svchost.exe The service host with the PID 420 is the host for the following services: Windows Audio DHCP Client Windows Event Log HomeGroup Provider TCP/IP NetBIOS Helper Security Center Additionally, there is currently this problem with the same machine: Even though my network is set to be a "Home network", I am unable to create a new homegroup.

    Read the article

  • How to Enable IPtables TRACE Target on Debian Squeeze (6)

    - by bernie
    I am trying to use the TRACE target of IPtables but I can't seem to get any trace information logged. I want to use what is described here: Debugger for Iptables. From the iptables man for TRACE: This target marks packes so that the kernel will log every rule which match the packets as those traverse the tables, chains, rules. (The ipt_LOG or ip6t_LOG module is required for the logging.) The packets are logged with the string prefix: "TRACE: tablename:chain- name:type:rulenum " where type can be "rule" for plain rule, "return" for implicit rule at the end of a user defined chain and "policy" for the policy of the built in chains. It can only be used in the raw table. I use the following rule: iptables -A PREROUTING -t raw -p tcp -j TRACE but nothing is appended either in /var/log/syslog or /var/log/kern.log! Is there another step missing? Am I looking in the wrong place? edit Even though I can't find log entries, the TRACE target seems to be set up correctly since the packet counters get incremented: # iptables -L -v -t raw Chain PREROUTING (policy ACCEPT 193 packets, 63701 bytes) pkts bytes target prot opt in out source destination 193 63701 TRACE tcp -- any any anywhere anywhere Chain OUTPUT (policy ACCEPT 178 packets, 65277 bytes) pkts bytes target prot opt in out source destination edit 2 The rule iptables -A PREROUTING -t raw -p tcp -j LOG does print packet information to /var/log/syslog... Why doesn't TRACE work?

    Read the article

  • One Apache VirtualHost entry overrides another?

    - by johnlai2004
    I can't tell why one apache virtual host entry keeps overriding another. The following file // filename: cbl <VirtualHost 74.207.237.23:80> ServerAdmin [email protected] ServerName completebeautylist.com ServerAlias www.completebeautylist.com DocumentRoot /srv/www/cbl/production/public_html/ ErrorLog /srv/www/cbl/production/logs/error.log CustomLog /srv/www/cbl/production/logs/access.log combined </VirtualHost> keeps overriding this file // filename: theccco.org <VirtualHost 74.207.237.23:80> SuexecUserGroup "#1010" "#1010" ServerName theccco.org ServerAlias www.theccco.org ServerAlias webmail.theccco.org ServerAlias admin.theccco.org DocumentRoot /home/theccco/public_html ErrorLog /var/log/virtualmin/theccco.org_error_log CustomLog /var/log/virtualmin/theccco.org_access_log combined ScriptAlias /cgi-bin/ /home/theccco/cgi-bin/ DirectoryIndex index.html index.htm index.php index.php4 index.php5 <Directory /home/theccco/public_html> Options -Indexes +IncludesNOEXEC +FollowSymLinks allow from all AllowOverride All </Directory> <Directory /home/theccco/cgi-bin> allow from all </Directory> RewriteEngine on RewriteCond %{HTTP_HOST} =webmail.theccco.org RewriteRule ^(.*) https://theccco.org:20000/ [R] RewriteCond %{HTTP_HOST} =admin.theccco.org RewriteRule ^(.*) https://theccco.org:10000/ [R] Alias /dav /home/theccco/public_html <Location /dav> DAV On AuthType Basic AuthName theccco.org AuthUserFile /home/theccco/etc/dav.digest.passwd Require valid-user ForceType text/plain Satisfy All RewriteEngine off </Location> </VirtualHost> I tried a2ensite, a2dissite, and reloading I get this message * Reloading web server config apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Thu Apr 15 10:47:36 2010] [warn] NameVirtualHost 74.207.237.23:443 has no VirtualHosts Aside from that, I don't know what else could be wrong. Can anyone tell me what to do?

    Read the article

  • both ssl and non-ssl on single port

    - by Zulakis
    I would like to make my apache2 webserver serve both http and https on the same port. With the different method i tried it was either not working on http or on https.. How can I do this? Update: If I enable SSL and then visit the with http I get page like this: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>400 Bad Request</title> </head><body> <h1>Bad Request</h1> <p>Your browser sent a request that this server could not understand.<br /> Reason: You're speaking plain HTTP to an SSL-enabled server port.<br /> Instead use the HTTPS scheme to access this URL, please.<br /> <blockquote>Hint: <a href="https://server/"><b>https://server/</b></a></blockquote></p> <hr> <address>Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny16 with Suhosin-Patch mod_ssl/2.2.9 OpenSSL/0.9.8g Server at server Port 443</address> </body></html> Because of this, it seems very much possible to have both http and https on the same port. A first step would be to change this default-page so it would present a 301-Moved header. Update2: According to this, it is possible. Now, the question is just how to configure apache to do it.

    Read the article

  • Best video codec to store my own collection

    - by Jack
    Hello! I think this question has already been asked but with different flavours. My problem resised in the fact that my camera (Canon G9) creates video with almost raw codec (I think it's plain old MPEG) so a 10 minutes video is almost 900mb. I would like to convert them in a format that has a good trade-off between space and quality, but I would prefer having the quality as good as the original (of course this is not possible because of lossy compression) just saving as much space is possible with a minimal lose of quality. Which codec should I look for? H264? It seems to be the champion of the moment.. otherwise which other ones could I try? XviD? Which parameters should I use? I mean how many kbits/s is a fair good bitrate to keep high quality? And what about audio codec? video specs are 640x480 at 30fps or 1024x768 at 15fps.. thanks in advance!

    Read the article

  • How to make emacs accept UTF-8 from the keyboard

    - by Brent.Longborough
    My friends have persuaded me to "try again" (about the 5th time in about 12 years) with emacs. I'm currently suffering a little, and need help with emacs + utf-8. I'm running the 23.3.1 emacs gui on Windows 7 with my own custom keyboard layout (built with MS Keyboard Layout Creator). The layout has a full ISO-8859-1 (Latin-1) character set, plus some additional characters from ISO-8859-9 (Latin-5, gis etc for Turkish) and w for Welsh (don't know where that one lives). In my .emacs, I have (blindly) added these lines: ;; key board / input method settings (setq locale-coding-system 'utf-8) (set-terminal-coding-system 'utf-8) (set-keyboard-coding-system 'utf-8) (set-language-environment 'UTF-8) ; prefer utf-8 for language settings Now, when I enter characters from ISO Latin-1 from the keyboard, they are accepted without problems, but characters from outside Latin-1 are "translated" to an approximate character in Latin-1. Thus, for example, Latin-5 "g" gets converted to a plain "g". Cutting and pasting, however, work fine. Can anyone tell me what I'm doing wrong? I should like to make everything I do with emacs utf-8 with BOM.

    Read the article

  • Translating debian network configuration to gentoo

    - by thpetrus
    I just got rid off Debian on my VPS (OpenVZ) and installed Gentoo on it, however it is a plain Gentoo image without further configuration, i.e. no working network. I'm not familiar with Debian and coulnd't figure out how to get the network set up, these are the debian network files /etc/network/interfaces: auto venet0 iface venet0 inet manual up ifconfig venet0 up up ifconfig venet0 127.0.0.2 up route add default dev venet0 down route del default dev venet0 down ifconfig venet0 down iface venet0 inet6 manual up ifconfig venet0 add ipv6addr/128 down ifconfig venet0 del ipv6addr/128 up route -A inet6 add default dev venet0 down route -A inet6 del default dev venet0 auto venet0:0 iface venet0:0 inet static address external_ip netmask 255.255.255.255 auto venet0:1 iface venet0:1 inet static address internal_ip netmask 255.255.255.255 Please note that external_ip, internal_ip and ipv6addr are placeholders. I copied the /etc/resolv.conf, know the gateway_ip and also have another ouput of ifconfig, if necessary. This is what I came up with, /etc/conf.d/net: config_venet0="127.0.0.2 netmask 255.255.255.255 brd 0.0.0.0" config_venet0:0="external_ip netmask 255.255.255.255 brd 0.0.0.0" route_venet0:0="default via gateway_ip" config_venet0:1="internal_ip netmask 255.255.255.255 brd 0.0.0.0" Broadcast IP is taken from ifconfig debian output - however it doesn't work. A symbolic link net.venet0:0 -> net.lo in /etc/init.d/ was created and I added net.venet0:0 to the boot runlevel.

    Read the article

  • How do I use key combinations on an axis on a joystick in xorg?

    - by valadil
    I'm using xserver-xorg-input-joystick on Debian Stable so I can use a joystick in place of the mouse. I have mouse movement working correctly, but got stuck trying to add functions for some other keys. These work: #Left stick #Pointer Option "MapAxis1" "mode=relative axis=1.5x" Option "MapAxis2" "mode=relative axis=1.5y" #Right stick #Arrow keys Option "MapAxis4" "mode=relative keylow=Left keyhigh=Right" Option "MapAxis5" "mode=relative keylow=Up keyhigh=Down" But when I try to make key combos (so I can navigate windows and screens in xmonad) I have no luck. #dpad #xmonad focus #up/down toggle window. l/r choose screen. Option "MapAxis8" "mode=relative keylow=Super_L,k keyhigh=Super_L,j" Option "MapAxis7" "mode=relative keylow=Super_L,w keyhigh=Super_L,e" I've also tried Super_R, plain old Super, Meta, and mod4mask, and anything else I can think of. These buttons print the letter, but don't appear to hold down the modifying key. The exception to that is shift. If I specify Shift_L or Shift_R, I get a capital letter. xev indicates that modifier keys are being pressed. If I lower Axis8, I get press Super_L, press k, release k, release Super_L. That looks like it should be working. Maybe this is an xmonad problem and not a joystick driver one? I'm also having trouble with getting an axis to use other XF86 keys: # triggers # song selection Option "MapAxis3" "mode=relative keylow=none keyhigh=XF86AudioForward" Option "MapAxis6" "mode=relative keylow=none keyhigh=XF86AudioBack" That does nothing. Any idea why? If it turns out that this isn't something I can do on an axis, but would work with a button, is there a way to treat my joysticks as buttons? Also, if anyone has suggestions for the other 5 buttons I'll have left after mouse buttons are bound, I'm listening.

    Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >