Search Results

Search found 4165 results on 167 pages for 'pulse audio'.

Page 79/167 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

  • BlueTooth not working on my HP Probook 4720s

    - by mtrento
    the blue tooth on my ubuntu 11.10 does not work. When i try to ad a device it scans indefinitely and never find anything. Wireless is working perfeclty and with windows 7 it is detected. As i read somewhere , the bluetooth is not listed in the usb devices. Is it supported under ubuntu? here are the output of the various debug command i tested : hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: E0:2A:82:7A:8B:04 ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:1895 acl:0 sco:0 events:70 errors:0 TX bytes:1986 acl:0 sco:0 commands:64 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'PC543host-0' Class: 0x5a0100 Service Classes: Networking, Capturing, Object Transfer, Telephony Device Class: Computer, Uncategorized HCI Version: 2.1 (0x4) Revision: 0x149c LMP Version: 2.1 (0x4) Subversion: 0x149c Manufacturer: Cambridge Silicon Radio (10) hcitool scan hcitool scan Scanning ... lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1ac Chicony Electronics Co., Ltd Bus 002 Device 003: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse Bus 002 Device 004: ID 148f:1000 Ralink Technology, Corp. lsmod | grep -i bluetooth bluetooth 166112 23 bnep,rfcomm,btusb dmesg | grep -i bluetooth [ 18.543947] Bluetooth: Core ver 2.16 [ 18.544017] Bluetooth: HCI device and connection manager initialized [ 18.544020] Bluetooth: HCI socket layer initialized [ 18.544021] Bluetooth: L2CAP socket layer initialized [ 18.545469] Bluetooth: SCO socket layer initialized [ 18.548890] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 30.204776] Bluetooth: RFCOMM TTY layer initialized [ 30.204782] Bluetooth: RFCOMM socket layer initialized [ 30.204784] Bluetooth: RFCOMM ver 1.11 [ 30.247291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.247295] Bluetooth: BNEP filters: protocol multicast lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 44:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe 45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

    Read the article

  • TV not detected by Windows/VGA - when there is a WHDI device in the signal chain

    - by ashwalk
    I'm at my wit's end with this one... I had an EVGA GTS 250, and I used to plug it's HDMI out into a WHDI sender, which transmitted to its corresponding WHDI receiver 15ft away, which then connected to a Samsung LN40D LCD TV through another HDMI cable. PC/VGA < [hdmi cable] < WHDI sender <[air] WHDI receiver < [hdmi cable] < TV It was perfect, stable, no perceivable latency. I just plugged everything the first time and it worked instantly. It sent 5.1 audio, and Windows/nVidia Control Center detected the TV by its name. The WHDI device is this one: http://goo.gl/Q8iWI5 Now I bought an EVGA GTX 650, and WHDI doesn't work anymore. Both Windows and nVidia Control Center won't detect the TV, only the monitor that's connected via DVI. The TV screen shows "TX202913 connected. Check video signal." on top of a black screen. Though the device is not the problem itself, just the fact that it's not allowing direct connection between PC and TV. I would bet that if put an AVR in its place I'd also have this issue. The HDMI on this new card works with other monitors. If I put the older card back, WHDI works normally. I have googled this for 5 months on and off. Once I bumped into a page that showed how to force a display device to always-on through registry edit. Once I restarted windows, the Tv (through WHDI) displayed my expanded or duplicated desktop at 1024x768 ONLY, and listed the display as "digital display". I could not change the resolution and it wouldn't playback audio (although the option was available at nVidia Control Center HDMI audio options, but did not work). This proves that there is no conflict between the devices, except that software-wise, Windows cannot, for the life of it, understand that there's a TV there to send video/audio to. Since this won't do (no audio, poor video), I reverted this regedit. It's also not an EDID problem within the TV, since when connected directly it works. The last weird bit of this saga is that today, I reminded of Windows' "Add Device" dialog, gave it a go, and a "Samsung Generic UPNP TV" showed up, which I promptly installed the drives for, rising to a climax of... ...NOTHING HAPPENING. As far as I can tell, it really didn't change anything other than using up a few kb in my main disc. I should also say that I looked a LOT into handshake problems and nothing applied either. Do any of you have an idea of what may be going on? I can't stand the thought of having a us$200 device not working because of the addition of a newer graphics card, when the much older one had no issues. There is absolutely NO REASON for this to happen. There is NO documentation on WHDI online. Apparently no one buys this stuff. For the same reason, no one responded to this same plea for help on NVidia and EVGA forums. Worst case, this can be a warning about this setup for people in the future. Thanx in advance.

    Read the article

  • Integrated webcam in lenovo t410 not working with 12.04

    - by kristianp
    I have a Lenovo T410 with an inbuilt webcam and I haven't been able to get the webcam working. I tried skype, cheese, both just give me a black window. The microphone works fine with skype, by the way. Can anyone provide any clues please? The webcam is enabled in the bios, but there is no light indicating the webcam is on (not sure if there should be, though). I tried this on Kubuntu 11.10 and have upgraded to 12.04 with the same results. The Fn-F6 keyboard combination doens't seem to do anything either. EDIT: I got the webcam replaced, it looks like it was a hardware problem, because it works fine now. Thanks guys. $ ls /dev/v4l/* /dev/v4l/by-id: usb-Chicony_Electronics_Co.__Ltd._Integrated_Camera-video-index0 /dev/v4l/by-path: pci-0000:00:1a.0-usb-0:1.6:1.0-video-index0 And lsusb: $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 005: ID 17ef:480f Lenovo Integrated Webcam [R5U877] Bus 002 Device 003: ID 05c6:9204 Qualcomm, Inc. Bus 002 Device 004: ID 17ef:1003 Lenovo Integrated Smart Card Reader Here is the output from guvcview, minus lots of lines describing the available capture formats. It says "unable to start with minimum setup. Please reconnect your camera.". guvcview 1.5.3 ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, .... { discrete: width = 1600, height = 1200 } Time interval between frame: 1/15, vid:17ef pid:480f driver:uvcvideo checking format: 1196444237 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } .... vid:17ef pid:480f driver:uvcvideo checking format: 1448695129 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! ERROR: Minimum Setup Failed. Exiting... VIDIOC_REQBUFS - Failed to delete buffers: Invalid argument (errno 22) cleaned allocations - 100% Closing portaudio ...OK Terminated.

    Read the article

  • Radeon Mobility HD 5470 Not Working on Ubuntu 10.10

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Indentify Codecs & Technical Information About Video Files

    - by DigitalGeekery
    Have you ever wanted to play an audio or video file but didn’t have the proper codec installed? Today we’ll show how to determine codecs, along with a host of other technical details about your media files with MediaInfo. Installation Download and install MediaInfo. You can find the download link at the bottom of the page. Note: When installing MediaInfo there is a recommended software bundle which you can opt out of by selecting Do not install option. Each recommended software choice may be different, like in this example it offers Spyware Terminator. The cool thing though is they use Open Candy which opts you out of the install. Just double check to make sure you’re not installing extra crapware. Using MediaInfo The first time you run MediaInfo it will display the Preferences window. There are various option such as language, output format, and whether or not you want MediaInfo to check for new versions. Click OK. Select a file or folder to analyze by clicking on the File or Folder icons on the left of the application window or by selecting File > Open from the menu. You can also drag and drop a file directly onto the application. MediaInfo will display details of your media file. In Basic view, you’ll see basic information. Notice in the example below the video and audio codecs, along with file size, running time of the media file, and even the application used to create the video file (Writing application).    You can switch to some of the other views by selecting View from the Menu and choosing form the dropdown list.   Sheet View will present the information a bit more clearly. You can see in the example below that the video and audio codec are listing in clearly identified columns. (AVC is often more commonly referred to H.264.)   Tree View is perhaps the most detailed. You can see from the example below the codec used for this AVI file is XviD.   Scrolling down even further you’ll see additional information like video and audio bit rates, frame rate, aspect ratio, and more.   In Basic View (and also in Sheet view) you can click to find a player for your file. In this instance with an MP4 file, it took me to the download page for Quicktime. This is by no means the only media player for this file, but if you are stuck for how to play a media file, this will forward you to a solution that works. You can do the same thing with Video codec. Click Go to the web site of this video codec to find a download.   MediaInfo is a simple but powerful tool that can be used to discover the details of a media file, or just to find a compatible codec. It works with most any video file type and is available for Windows, Mac, and Linux. Some Mac and Linux versions, however, are currently command line only. Download MediaInfo Similar Articles Productive Geek Tips How to Convert Videos to 3GP for Mobile PhonesFix for VLC Skipping and Lagging Playing High-Def Video FilesUsing VLC Player Under VistaUse Your Mac Mini as a Media Server Part 2How to Play .OGM Video Files in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

    Read the article

  • Radeon Mobility HD 5470 Not Working

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Convert old AVI files to a modern format

    - by iWerner
    Hi, we have a collection of old home videos that were saved in AVI format a long time ago. I want to convert these files to a more modern format because the Totem Movie Player that comes with Ubuntu 10.4 seems to be the only program capable of playing them. The files seem to be encoded with a MJPEG codec, and playing them in VLC or Windows Media Player plays only the sound but there is no video. Avidemux was able to open the files, but the quality of the video is severely degraded: The video skips frames and is interlaced (it's not interlaced when playing it in Totem). Neither ffmpeg nor mencoder seems to be able to read the video stream. mencoder reports that it is using ffmpeg's codec. Here's a section from its output: ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family [mjpeg @ 0x92a7260]mjpeg: using external huffman table [mjpeg @ 0x92a7260]mjpeg: error using external huffman table, switching back to internal Unsupported PixelFormat -1 Selected video codec: [ffmjpeg] vfm: ffmpeg (FFmpeg MJPEG) while running ffmpeg produces the following: $ ffmpeg -i input.avi output.avi FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.1-1ubuntu1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Mar 4 2010 12:35:30, gcc: 4.4.3 [avi @ 0x87952c0]non-interleaved AVI Input #0, avi, from 'input.avi': Duration: 00:00:15.24, start: 0.000000, bitrate: 22447 kb/s Stream #0.0: Video: mjpeg, yuvj422p, 720x544, 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: pcm_s16le, 44100 Hz, stereo, s16, 1411 kb/s Output #0, avi, to 'output.avi': Stream #0.0: Video: mpeg4, yuv420p, 720x544, q=2-31, 200 kb/s, 90k tbn, 25 tbc Stream #0.1: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 0 fps= 0 q=0.0 Lsize= 143kB time=15.23 bitrate= 76.9kbits/s video:0kB audio:119kB global headers:0kB muxing overhead 20.101777% So the problem is that output does not contain any video, as evidenced by the video:0kB at the end. In all of the above cases the audio comes out fine. So my question is: What can I do to convert these files to a more modern format with more modern codecs?

    Read the article

  • Artec TV18R Tuner not working :(

    - by Antillar Maximus
    Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

    Read the article

  • Drivers for Atheros AR928X?

    - by Pato7
    I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

    Read the article

  • QFileDialog filter from mime-types

    - by Mathias
    I want the filter in a QFileDialog to match all audio file types supported by Phonon on the platform in question. 1 - However I am not able to find a way in Qt to use mime types in a filter. How can I do that? 2 - Or how can I find the corresponding file extensions for the mimetypes manually? The solution should be Qt based, or at least be cross platform and supported everywhere Qt is. Following is a short code describing my problem: #include <QApplication> #include <QFileDialog> #include <QStringList> #include <phonon/backendcapabilities.h> QString mime_to_ext(QString mime) { // WHAT TO REALLY DO ?? // NEEDLESS TO SAY; THIS IS WRONG... return mime.split("/").back().split('-').back(); } int main(int argc, char **argv) { QApplication app(argc, argv); QStringList p_audio_exts; QStringList p_mime_types = Phonon::BackendCapabilities::availableMimeTypes(); for(QStringList::iterator i = p_mime_types.begin(), ie = p_mime_types.end(); i != ie; i++) { if((*i).startsWith("audio")) p_audio_exts << mime_to_ext(*i); } QString filter = QString("All Files(*)"); if(!p_audio_exts.isEmpty()) { QString p_audio_filter = QString("Audio Files (*.%1)").arg(p_audio_exts.join(" *.")); filter = QString("%1;;%2").arg(p_audio_filter).arg(filter); } QFileDialog dialog(NULL, "Open Audio File", QString::null, filter); dialog.exec(); }

    Read the article

  • How can I update the album art path using contentResolver?

    - by Ungureanu Liviu
    Hi! I want to update/insert a new image for an album in MediaStore but i can't get it work.. This is my code: public void updateAlbumImage(String path, int albumID) { ContentValues values = new ContentValues(); values.put(MediaStore.Audio.Albums.ALBUM_ART, path); int n = contentResolver.update(MediaStore.Audio.Albums.EXTERNAL_CONTENT_URI, values, MediaStore.Audio.Albums.ALBUM_ID + "=" + albumID, null); Log.e(TAG, "updateAlbumImage(" + path + ", " + albumID + "): " + n); } The error is: 03-24 03:09:46.323: ERROR/AndroidRuntime(5319): java.lang.UnsupportedOperationException: Unknown or unsupported URL: content://media/external/audio/albums 03-24 03:09:46.323: ERROR/AndroidRuntime(5319): at android.database.DatabaseUtils.readExceptionFromParcel(DatabaseUtils.java:131) 03-24 03:09:46.323: ERROR/AndroidRuntime(5319): at android.database.DatabaseUtils.readExceptionFromParcel(DatabaseUtils.java:111) 03-24 03:09:46.323: ERROR/AndroidRuntime(5319): at android.content.ContentProviderProxy.update(ContentProviderNative.java:405) 03-24 03:09:46.323: ERROR/AndroidRuntime(5319): at android.content.ContentResolver.update(ContentResolver.java:554) 03-24 03:09:46.323: ERROR/AndroidRuntime(5319): at com.liviu.app.smpp.managers.AudioManager.updateAlbumImage(AudioManager.java:563) 03-24 03:09:46.323: ERROR/AndroidRuntime(5319): at com.liviu.app.smpp.ShowAlbumsActivity.saveImageFile(ShowAlbumsActivity.java:375) 03-24 03:09:46.323: ERROR/AndroidRuntime(5319): at com.liviu.app.smpp.ShowAlbumsActivity.onClick(ShowAlbumsActivity.java:350) Thank you!

    Read the article

  • Can the Flash CS4 [embed] tag be made to export assets to frame 2 rather than frame 1?

    - by Tim Knauf
    We're working on a Flash CS4 project where the main .fla file has ballooned in size and 'Publish' is taking forever. I suspect a large amount of the size (and at least some of the compile time) is due to the quantity of audio symbols in the library. I would love to remove this unnecessary bloat from the .fla file. I've experimented with removing an audio symbol from the library and using the [embed] metadata tag instead, like so: [Embed(source="audio/music/EndOfLevelDitty.mp3")] public var EndOfLevelDitty:Class The resulting published file works perfectly, but there is a problem. Our game uses a preloader on the first frame of the timeline, so all other classes need to be exported in frame 2 (as set in Publish Settings ActionScript 3.0 Settings). So a size report normally begins like this: Frame # Frame Bytes Total Bytes Scene ------- ----------- ----------- ---------------- 1 284515 284515 Scene 1 2 5485305 5769820 (AS 3.0 Classes Export Frame) However, if I use an [embed] tag on a small sound, my size report is now: Frame # Frame Bytes Total Bytes Scene ------- ----------- ----------- ---------------- 1 363320 363320 Scene 1 2 5407240 5770560 (AS 3.0 Classes Export Frame) As you can see, the embedded sound has been exported into frame 1 rather than frame 2. If I were to embed all sounds in this manner, the size of frame 1 would grow to be huge, and users would be looking at a white screen for ages before the preloader frame even loaded. So my question is this: can I use an [embed] tag but have the embedded asset export in frame 2 instead of frame 1? Project constraints: Our team composition means we can't change to pure Flex at this stage. The compiled .swf needs to be 'all in one', so we can't split the preloader into a separate file, and we can't access external resources. Edit: I'd also settle for having the audio in an embedded library SWC, but there seems to be no way to make that embed in frame 2 either; it always ends up in frame 1.

    Read the article

  • Show image with link based on first directory with Javascript

    - by Nestorete
    Hi, i need some help please, i want to show an image on my Page depending of the first directory of the URL. Example: In Any of this URLs will show the image1.jpg www.mysite.com/audio/amplifiers/400wats.html www.mysite.com/audio/ www.mysite.com/audio/amplifiers/ In any of this others will show the image2.jpg www.mysite.com/video/spots/40wats.html www.mysite.com/video/amplifiers/400wats.html www.mysite.com/video/lighting/laser.html www.mysite.com/video/laser/ At the moment i can show the image only if the url is only the first directory, bu no in the internal directory or documents. This is the script that i'm using right now: <script type="text/javascript"> switch (location.pathname) { case "/audio/": document.write("From Web<BR>") break case "/video/": document.write('<A HREF="slides.htm" target="_blank"><IMG SRC="/adman/banners/joinvip.gif" WIDTH=728 HEIGHT=90 BORDER=0></A>') break default: document.write('<A HREF="http://www.apple.com" target="_blank"><IMG SRC="http://www.amd.com/us-en/assets/content_type/DownloadableAssets/NEW_PIB_728x90.gif" WIDTH=728 HEIGHT=90 BORDER=0></A>') break } </script> Thank you

    Read the article

  • Show image with link based on first directory with Javascript

    - by Nestorete
    Hi, i need some help please, i want to show an image on my Page depending of the first directory of the URL. Example: In Any of this URLs will show the image1.jpg www.mysite.com/audio/amplifiers/400wats.html www.mysite.com/audio/ www.mysite.com/audio/amplifiers/ In any of this others will show the image2.jpg www.mysite.com/video/spots/40wats.html www.mysite.com/video/amplifiers/400wats.html www.mysite.com/video/lighting/laser.html www.mysite.com/video/laser/ At the moment i can show the image only if the url is only the first directory, bu no in the internal directory or documents. This is the script that i'm using right now: <script type="text/javascript"> switch (location.pathname) { case "/audio/": document.write("From Web<BR>") break case "/video/": document.write('<A HREF="slides.htm" target="_blank"><IMG SRC="/adman/banners/joinvip.gif" WIDTH=728 HEIGHT=90 BORDER=0></A>') break default: document.write('<A HREF="http://www.apple.com" target="_blank"><IMG SRC="http://www.amd.com/us-en/assets/content_type/DownloadableAssets/NEW_PIB_728x90.gif" WIDTH=728 HEIGHT=90 BORDER=0></A>') break } </script> Thank you

    Read the article

  • LINQ to objects: Is there

    - by Charles
    I cannot seem to find a way to have LINQ return the value from a specified accessor. I know the name of the accessors for each object, but am unsure if it is possible to pass the requested accessor as a variable or otherwise achieve the desired refactoring. Consider the following code snippet: // "value" is some object with accessors like: format, channels, language row = new List<String> { String.Join(innerSeparator, (from item in myObject.Audio orderby item.Key ascending select item.Value.format).ToArray()), String.Join(innerSeparator, (from item in myObject.Audio orderby item.Key ascending select item.Value.channels).ToArray()), String.Join(innerSeparator, (from item in myObject.Audio orderby item.Key ascending select item.Value.language).ToArray()), // ... } I'd like to refactor this into a method that uses the specified accessor, or perhaps pass a delegate, though I don't see how that could work. string niceRefactor(myObj myObject, string /* or whatever type */ ____ACCESSOR) { return String.Join(innerSeparator, (from item in myObject.Audio orderby item.Key ascending select item.Value.____ACCESSOR).ToArray()); } I have written a decent amount of C#, but am still new to the magic of LINQ. Is this the right approach? How would you refactor this?

    Read the article

  • Play playlist with MediaPlayer

    - by Kaloer
    Hi, I'm trying to play a playlist I get using the MediaStore provider. However, when I try playing a playlist nothing happens. Can a MediaPlayer play a playlist (m3u file) and do I need to set the first track to play ? This is my test code in the onCreate() method: Uri uri = MediaStore.Audio.Playlists.EXTERNAL_CONTENT_URI; if(uri == null) { Log.e("Uri = null"); } String[] projection = new String[] { MediaStore.Audio.Playlists._ID, MediaStore.Audio.Playlists.NAME, MediaStore.Audio.Playlists.DATA }; Cursor c = managedQuery(uri, projection, null, null, null); if(c == null) { Toast.makeText(getApplicationContext(), R.string.alarm_tone_picker_error, Toast.LENGTH_LONG).show(); return; } if(!c.moveToFirst()) { c.close(); Toast.makeText(getApplicationContext(), R.string.alarm_tone_picker_no_music, Toast.LENGTH_LONG).show(); return; } c.moveToFirst(); try { MediaPlayer player = new MediaPlayer(); player.setDataSource(c.getString(2)); player.start(); } catch(Exception e) { e.printStackTrace(); } I have turned on every volume stream. Thanks you, Kaloer

    Read the article

  • JavaScript: Changing src-attribute of a embed-tag

    - by Mike
    I have the following scenario. I show the user some audio files from the server. The user clicks on one, then onFileSelected is eventually executed with both the selected folder and file. What the function does is change the source from the embedded object. So in a way, it is a preview of the selected file before accepting it and save the user's choice. A visual aid. HTML <embed src="/resources/audio/_webbook_0001/embed_test.mp3" type="audio/mpeg" id="audio_file"> JavaScript function onFileSelected(file, directory) { jQuery('embed#audio_file').attr('src', '/resources/audio/'+directory+'/'+file); }; Now, this works fine in Firefox, but Safari and Chrome simply refuse to change the source, regardless of Operating System. jQuery finds the object (jQuery.size() returns 1), it executes the code, but no change in the HTML Code. Why does Safari prevent me from changing the <embed> source and how can I circumvent this?

    Read the article

  • Manually extracting portions of strings contained in a list (parsing)

    - by user1652011
    I'm aware that there are modules that fully simplify this function, but saying that I am running from a base install of python (standard modules only), how would I extract the following: I have a list. This list is the contents, line by line, of a webpage. Here is a mock up list (unformatted) for informative purposes: <script> link = "/scripts/playlists/1/" + a.id + "/0-5417069212.asx"; <script> "<a href="/apps/audio/?feedId=11065"><span class="px13">Eastern Metro Area Fire</span>" From the above string, I need the following extracted. The feedId (11065), which is incidentally a.id in the code above., "/scripts/playlists/1/" and "/0-5417069212.asx". Remembering that each of these lines is just contents from objects in a list, how would I go about extracting that data? Here is the full list: contents = urllib2.urlopen("http://www.radioreference.com/apps/audio/?ctid=5586") Pseudo: from urllib2 import urlopen as getpage page_contents = getpage("http://www.radioreference.com/apps/audio/?ctid=5586") feedID = % in (page_contents.search() for "/apps/audio/?feedId=%") titleID = % in (page_contents.search() for "<span class="px13">%</span>") playlistID = % in (page_contents.search() for "link = "%" + a.id + "*.asx";") asxID = * in (page_contents.search() for "link = "*" + a.id + "%.asx";") streamURL = "http://www.radioreference.com/" + playlistID + feedID + asxID + ".asx" I plan to format it as such that streamURL should = : http://www.radioreference.com/scripts/playlists/1/11065/0-5417067072.asx

    Read the article

  • Why did Ubuntu suddenly get so slow?

    - by user101383
    12.10 has been slowing down mysteriously. Normally, in past versions, I can log in, open Firefox, and it will pop up within seconds. 12.10 is like that upon install too, though once I install my old apps, it gets very slow by Ubuntu standards. After login the hard drive will just make noise for a while before the OS will do anything. Hardware: enter description: Desktop Computer product: XPS 8300 () vendor: Dell Inc. serial: B6G2WR1 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=desktop uuid=44454C4C-3600-1047-8032-C2C04F575231 core description: Motherboard product: 0Y2MRG vendor: Dell Inc. physical id: 0 version: A00 serial: ..CN7360419G04VQ. slot: To Be Filled By O.E.M. *cpu description: CPU product: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 256KiB capacity: 256KiB capabilities: internal write-through unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-through unified *-cache:2 DISABLED description: L3 cache physical id: 7 slot: L3-Cache size: 8MiB capacity: 8MiB capabilities: internal write-back unified *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 8GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 0 serial: 7228183 slot: DIMM3 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 1 serial: 1E28183 slot: DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 2 serial: 9E28183 slot: DIMM4 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 3 serial: 5527183 slot: DIMM2 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A05 date: 09/21/2011 size: 64KiB capacity: 4032KiB capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:fe600000-fe6fffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: Juniper [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:44 memory:d0000000-dfffffff memory:fe620000-fe63ffff ioport:e000(size=256) memory:fe600000-fe61ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:48 memory:fe640000-fe643fff *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:45 memory:fe708000-fe70800f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:fe707000-fe7073ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:46 memory:fe700000-fe703fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 memory:fe500000-fe5fffff *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:16 memory:fe500000-fe503fff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 memory:fe400000-fe4fffff *-network description: Ethernet interface product: NetLink BCM57788 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 18:03:73:e1:a7:71 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:47 memory:fe400000-fe40ffff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fe706000-fe7063ff *-isa description: ISA bridge product: H67 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:43 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fe705000-fe7057ff *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:fe704000-fe7040ff ioport:f000(size=32) *-scsi:0 physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: Hitachi HUA72201 vendor: Hitachi physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: JP4O serial: JPW9J0HD21BTZC size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000641dc *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 4e3d91b7-fd38-4f44-a9e9-ba3c39b926ec size: 585GiB capacity: 585GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-10-21 16:26:50 filesystem=ext4 lastmountpoint=/ modified=2012-10-29 18:12:08 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2012-10-29 18:12:08 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 7823MiB capacity: 7823MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 7823MiB capabilities: nofs *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 84a92aae-347b-7940-a2d1-f4745b885ef2 size: 337GiB capacity: 337GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2012-10-21 18:43:39 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVDRWBD DH-12E3S vendor: PLDS physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: MD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-scsi:2 physical id: 3 bus info: usb@2:1.8 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdb configuration: sectorsize=512 *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@6:0.0.1 logical name: /dev/sdc configuration: sectorsize=512 *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@6:0.0.2 logical name: /dev/sdd configuration: sectorsize=512 *-disk:3 description: SCSI Disk product: MS/MS-Pro vendor: Generic- physical id: 0.0.3 bus info: scsi@6:0.0.3 logical name: /dev/sde version: 1.03 serial: 3 capabilities: removable configuration: sectorsize=512 *-medium physical id: 0 logical name: /dev/sde

    Read the article

  • Progress gauge in status bar, using Cody Precord's ProgressStatusBar

    - by MCXXIII
    Hi. I am attempting to create a progress gauge in the status bar for my application, and I'm using the example in Cody Precord's wxPython 2.8 Application Development Cookbook. I've reproduced it below. For now I simply wish to show the gauge and have it pulse when the application is busy, so I assume I need to use the Start/StopBusy() methods. Problem is, none of it seems to work, and the book doesn't provide an example of how to use the class. In the __init__ of my frame I create my status bar like so: self.statbar = status.ProgressStatusBar( self ) self.SetStatusBar( self.statbar ) Then, in the function which does all the work, I have tried things like: self.GetStatusBar().SetRange( 100 ) self.GetStatusBar().SetProgress( 0 ) self.GetStatusBar().StartBusy() self.GetStatusBar().Run() # work done here self.GetStatusBar().StopBusy() And several combinations and permutations of those commands, but nothing happens, no gauge is ever shown. The work takes several seconds, so it's not because the gauge simply disappears again too quickly for me to notice. I can get the gauge to show up by removing the self.prog.Hide() line from Precord's __init__ but it still doesn't pulse and simply disappears never to return once work has finished the first time. Here's Precord's class: class ProgressStatusBar( wx.StatusBar ): '''Custom StatusBar with a built-in progress bar''' def __init__( self, parent, id_=wx.ID_ANY, style=wx.SB_FLAT, name='ProgressStatusBar' ): super( ProgressStatusBar, self ).__init__( parent, id_, style, name ) self._changed = False self.busy = False self.timer = wx.Timer( self ) self.prog = wx.Gauge( self, style=wx.GA_HORIZONTAL ) self.prog.Hide() self.SetFieldsCount( 2 ) self.SetStatusWidths( [-1, 155] ) self.Bind( wx.EVT_IDLE, lambda evt: self.__Reposition() ) self.Bind( wx.EVT_TIMER, self.OnTimer ) self.Bind( wx.EVT_SIZE, self.OnSize ) def __del__( self ): if self.timer.IsRunning(): self.timer.Stop() def __Reposition( self ): '''Repositions the gauge as necessary''' if self._changed: lfield = self.GetFieldsCount() - 1 rect = self.GetFieldRect( lfield ) prog_pos = (rect.x + 2, rect.y + 2) self.prog.SetPosition( prog_pos ) prog_size = (rect.width - 8, rect.height - 4) self.prog.SetSize( prog_size ) self._changed = False def OnSize( self, evt ): self._changed = True self.__Reposition() evt.Skip() def OnTimer( self, evt ): if not self.prog.IsShown(): self.timer.Stop() if self.busy: self.prog.Pulse() def Run( self, rate=100 ): if not self.timer.IsRunning(): self.timer.Start( rate ) def GetProgress( self ): return self.prog.GetValue() def SetProgress( self, val ): if not self.prog.IsShown(): self.ShowProgress( True ) if val == self.prog.GetRange(): self.prog.SetValue( 0 ) self.ShowProgress( False ) else: self.prog.SetValue( val ) def SetRange( self, val ): if val != self.prog.GetRange(): self.prog.SetRange( val ) def ShowProgress( self, show=True ): self.__Reposition() self.prog.Show( show ) def StartBusy( self, rate=100 ): self.busy = True self.__Reposition() self.ShowProgress( True ) if not self.timer.IsRunning(): self.timer.Start( rate ) def StopBusy( self ): self.timer.Stop() self.ShowProgress( False ) self.prog.SetValue( 0 ) self.busy = False def IsBusy( self ): return self.busy

    Read the article

  • 500px.com Ranking Algorithm

    - by alex
    I was recently wondering how http://500px.com calculates their "Pulse" rating. The "Pulse" is a score from 1..100 based on the popularity of the photo. I think it might use some of the following criteria: Number of likes Number of "favorites" Number of comments Total views maybe the time since the photo has been uploaded maybe some other non-obvious criteria like the users follower count, user rank, camera model or similar How would I achieve some sort of algorithm like this? Any advice on how to implement an algorithm with this criteria (and maybe some code) would be appreciated too.

    Read the article

  • Access full BIOS settings

    - by FlxEx
    I recently purchased a Acer Aspire TimelineU M5-481TG-6814, only to discover that the sound isn't working. Through my research, it seems that the most probable cause is that the onboard audio is disabled in the BIOS. However, the option to enable the onboard audio just isn't present in the BIOS. So my question is: is there any way of accessing such settings in the BIOS? Some extra information: link my purchase System BIOS version: InsydeH20 Setup Utility Rev3.7, V1.05

    Read the article

  • Lighttpd not cleanly restarting (address already in use)

    - by NilObject
    When doing a dist-upgrade recently, my lighttpd-1.4.19 install on Ubuntu 8.0.4 has begun failing to restart or reload properly with the /etc/init.d/lighttpd restart command. ~$ sudo /etc/init.d/lighttpd restart * Stopping web server lighttpd ...done. * Starting web server lighttpd 2009-06-13 04:06:36: (network.c.300) can't bind to port: 80 Address already in use ...fail! The same error occurs when I do a reload. The way I get around it is to kill lighttpd and then issue the start command, but it seems like I shouldn't have to do that :) I've looked at my config files, and can't spot any immediate errors. Does anyone have any ideas what can be causing this error? This seems to be the latest version as of writing this question that is available via the apt-get route. My config file is: # Debian lighttpd configuration file # ############ Options you really have to take care of #################### ## modules to load # mod_access, mod_accesslog and mod_alias are loaded by default # all other module should only be loaded if neccesary # - saves some time # - saves memory server.modules = ( "mod_access", "mod_alias", "mod_accesslog", "mod_compress", "mod_fastcgi", "mod_rewrite", "mod_redirect", ) ## a static document-root, for virtual-hosting take look at the ## server.virtual-* options server.document-root = "/var/www/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" fastcgi.server = (".php" => (( "bin-path" => "/usr/bin/php5-cgi", "socket" => "/tmp/php.socket" ))) ## files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", "index.lighttpd.html" ) ## Use the "Content-Type" extended attribute to obtain mime type if possible # mimetype.use-xattr = "enable" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "audio/x-wav", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".rss" => "application/rss+xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar" ) include_shell "/usr/share/lighttpd/include-conf-enabled.pl" My /etc/init.d/lighttpd script is (untouched from installation): #!/bin/sh ### BEGIN INIT INFO # Provides: lighttpd # Required-Start: networking # Required-Stop: networking # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start the lighttpd web server. ### END INIT INFO PATH=/sbin:/bin:/usr/sbin:/usr/bin DAEMON=/usr/sbin/lighttpd NAME=lighttpd DESC="web server" PIDFILE=/var/run/$NAME.pid SCRIPTNAME=/etc/init.d/$NAME ENV="env -i LANG=C PATH=/usr/local/bin:/usr/bin:/bin" SSD="/sbin/start-stop-daemon" DAEMON_OPTS="-f /etc/lighttpd/lighttpd.conf" test -x $DAEMON || exit 0 set -e # be sure there is a /var/run/lighttpd, even with tmpfs mkdir -p /var/run/lighttpd > /dev/null 2> /dev/null chown www-data:www-data /var/run/lighttpd chmod 0750 /var/run/lighttpd . /lib/lsb/init-functions case "$1" in start) log_daemon_msg "Starting $DESC" $NAME if ! $ENV $SSD --start --quiet\ --pidfile $PIDFILE --exec $DAEMON -- $DAEMON_OPTS ; then log_end_msg 1 else log_end_msg 0 fi ;; stop) log_daemon_msg "Stopping $DESC" $NAME if $SSD --quiet --stop --oknodo --retry 30\ --pidfile $PIDFILE --exec $DAEMON; then rm -f $PIDFILE log_end_msg 0 else log_end_msg 1 fi ;; reload) log_daemon_msg "Reloading $DESC configuration" $NAME if $SSD --stop --signal 2 --oknodo --retry 30\ --quiet --pidfile $PIDFILE --exec $DAEMON; then if $ENV $SSD --start --quiet \ --pidfile $PIDFILE --exec $DAEMON -- $DAEMON_OPTS ; then log_end_msg 0 else log_end_msg 1 fi else log_end_msg 1 fi ;; restart|force-reload) $0 stop [ -r $PIDFILE ] && while pidof lighttpd |\ grep -q `cat $PIDFILE 2>/dev/null` 2>/dev/null ; do sleep 1; done $0 start ;; *) echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 exit 1 ;; esac exit 0

    Read the article

  • Repackage m4v file

    - by Daniel Huckstep
    I have some m4v files I made with Handbrake where the AC3 audio channel was the first one, and the stereo was the second. This causes problems with some things (like Quicktime) so I want to repackage the file such that the stereo track is the first audio track. I don't want to re-encode things. Can I do this? Can I do it for free?

    Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >