Search Results

Search found 10673 results on 427 pages for 'recovery disk'.

Page 79/427 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

  • slow disk writes between host and guest

    - by Jure1873
    I've got a ubuntu (server kernel) on a amd x4, 4gb ram, 2x seagate sata 1 tb disks for testing virtual machines and the write performance is very slow. The two disks are in a software raid1 array, one small boot ext3 partition, 10gb system partition and the rest is a xfs partition (about 980) gb for data (virtual machines). If I'm copying files from the virtual machine to the host with rsync or scp the copy frequently stalls or goes at about 1mb/s. What's wrong? I've tried disabling barriers on xfs, increased logbufs, allocsize, but it seems nothing helps. The strange thing is that await (for example during copying) for sda is usually under 100, while for sdb is around 400. Any ideas on what could be wrong / what could I do to improve this setup?

    Read the article

  • How do I recover JPEGs with zero bytes?

    - by Jill
    I downloaded some wedding photos into my external drive about a month ago. A total of 3 cards were downloaded into 3 different files. The first file lists all of the photos, about 600 images, but they have zero bytes. The other 2 files are fine. I can't recover the compact flash card because I have used it too many times since then. Is there any way to recover the images on my drive?

    Read the article

  • Forgot to unmount/eject external hard drive, lost moved files. Mac OS X

    - by balupton
    So I was using my Mac with my external hard drive connected via USB. I moved about 10 GB of data to it (via drag and drop while holding down the Command key to move the files rather than to copy them). They moved to the drive all right, but as I was having some issues and the Finder crashed after the transfer, I was unable to eject the volume and later everything froze so I had to do a hard restart (hold the power button). When I remounted the volume (plugged the external hard drive back in) it no longer had any of the files which I moved onto it. As it was a lot of data, how can I recover these files?

    Read the article

  • I just deleted "/bin". What's the best way to recover?

    - by Tom Marthenal
    I just ran (not on purpose!) rm -rf /bin. I've booted down the computer and am using Finnix to try to recover from it. I have succeeded in mounting the drive, and confirmed that, yes, the entire /bin folder is deleted. Is it possible to recover from this without reinstalling the OS? I'm thinking that I could setup a VM with the same OS and architecture (Ubuntu Server 11.10 alpha release, x86) and install all the packages I had installed on the server, then just copy the /bin folder. Will this work? Am I better off just starting over?

    Read the article

  • How to recover deleted files on ext3 fs

    - by Mike
    I have a drive which was using the ext3 filesystem. I am told that about 10Gb of data was deleted off the drive (probably via rm). The drive is currently mounted as read-only to preserve all data. Does anyone know of a method to restore some or all of the data? Also if it helps, the OS was Fedora. I've also been told that the data is mostly ASCII fortan source code and Matlab files. Conclusion I have finally managed to get the data back, and with the simplest means ever! After weeks of trying and failing to bring back much of any data, I brought someone in today to take a look at it and offer suggestions, he simply cd'd to the directory and everything was there! It was never lost in the first place!!! Needless to say I feel really dumb right now, but I learned quite a lot with this whole fiasco. At any rate, while I was looking through data forensics solutions, I found that the Autopsy, or more specifically the SleuthKit was the most helpful. So I will accept that as the final answer. I would also like to note for anyone that comes across this later on that the most up-voted (currently) answer by sekenre was also helpful and I learned a lot, but ultimately it did not help with the type (very many, and some being very large) of files I was dealing with. So thank to all you that provided suggestions and wish you all the best!

    Read the article

  • About Hard Disk Drive Docks

    - by Crossbrowser
    I'm thinking of buying a drive dock to put my unused large HDD to use. I will also probably use the dock to backup files and swap the drives regularly. I have a few questions though: Are they noisy? I plan to use them via USB (because I don't think I have eSata connectors), am I gonna want to kill myself every time I backup? (I know it's supposed to be 480 Mbps, but how realistic is this?) Do you recommend a particular model? (I was thinking about this Startech HDD dock) Thank you

    Read the article

  • Accidentally deleted the software for MyPassport Essential SE 1TB Hardrive

    - by user26192
    I'm posting for a friend of mine. She bought a WD MyPassport Essential SE 1 TB Hard drive the other day. When she plugged in the USB in her lap top, the driver cannot be recognized by the smart ware software. While she was doing a back up of her files, McAfee was running in the background. Since the backup was taking so long to finish, she decided to pause it. She tried to delete the partially backed up files, but instead, she accidentally deleted the entire file in the folder including the pre-installed software. Now, when she tries to start up the MyPassport, the smart ware doesn't show up anymore. Can someone please give us advice what can she do about this? Thank you.

    Read the article

  • Linux RAID0 - relocating member disk

    - by qdot
    I've got an issue I would rather handle with the array online - I am using RAID0 for temporary video storage - data that is low-cost to restore, but that is used frequently. The software array looks like this: md1 : active raid0 sdb1[2] sdc1[3] sdd1[0] sde1[1] 1953487616 blocks 64k chunks I have another partition (sda1) in this system, that I want to use to replace sdc1 (The drives are of varying age, and sdc1 is definitely the slowest one, limiting the entire array's sequential read performance to only 300MB/s). Is there a way to migrate the data from sdc1 to sda1 while the array is still online?

    Read the article

  • Trouble "turning off" dialtone in Exchange 2010

    - by makerofthings7
    Given that there are two ways to enable dial tone, I'm having trouble turing it off. The two ways I'm aware of are: Dismount the database, delete it or rename it, mount it, Exchange will prompt for a dial tone creation. Run the command: Get-Mailbox -Database DB1 | Set-Mailbox -Database DTDB1 as described here Both options should result in Outlook "thinking" it's in dial tone mode. Since my goal is to shut off dial tone, I think I need to learn the specific, technical parameters that "tell" Outlook that it is in dial tone mode. Question How can I turn off dial tone for a given database? What tells outlook that it's in dial tone mode?

    Read the article

  • Recover file from NTFS after it was formatted twice

    - by Phil
    I'm running Linux Mint and have a 2TB drive that I formatted as NTFS. I copied ~120GB of files from another computer to the 2TB drive, removing the files from the other computer as I did so. When they were all on the 2TB drive, I zipped them up as file "Gold.tar.gz". Then I reformatted the 2TB drive as ext3 in a moment of absolute stupidity. I formatted the 2TB back to NTFS, but of course everything is gone. Here is what I have tried: TestDisk -- won't find any lost partitions or undelete files, just the current empty one PhotoRec -- seems to only find some broken text files and misidentify their extensions. It never finds the 100's of avi files I had (before the 120GB copy, I already had 750GB on the drive full of avi files) or anything else that would show me it's working properly. Using dd I recovered the first 512MB of the drive and went hunting through it. I found all of the file as MFT entries, including the file "Gold.tar.gz" in a 2048 byte MFT record. I'm looking now for some way of either (1) telling PhotoRec to look at that record, or (2) analyze the MFT record myself and discover the sectors holding the data; I can piece it all together using dd and join the binary output if it's fragmented. One last thing - from the moment I got this drive a few days ago to the incident, there were only file copies made to it and no deletes. I formatted as NTFS, then copied thousands of files, then made a tar.gz, then reformatted to ext3, then reformatted to NTFS again. I'm hoping that the size of the drive and fact that there was no file modification/deleting happening makes for minimal file fragmentation.

    Read the article

  • how can I get back /usr/local/bin/mysql on Snow Leopard?

    - by Ole Media
    From terminal and trying to uninstall macports, I ran a command, rm -rf / macports...., that erased bunch of stuff. I feel ashamed about this, not realizing the space after /. Since then, mysql is running but I cannot execute any of the mysql commands because it is not under /usr/local/bin/ I went ahead an reinstall mysql but without luck. What steps do you recommend on doing in order to be able to run mysql, mysqlduml, mysqladmin, from terminal? I can access databases from phpmyadmin, so mysql is running, don't ask me how.

    Read the article

  • What diagnostics are safe to run on an SSD drive?

    - by Peter Mounce
    I have a MacBook Pro (late 2010) with a Crucial RealSSD 256Gb in it; 60Gb is given to the Windows 7 x64 BootCamp partition. I have a USB-attached 500Gb drive for (most) data. In the last day or so, I've had a BSOD and several OS freezes (both Mac OSX 10.6.6 and Win7). The system in both cases will boot fine (at the moment!) and then run things fine, then some time later a program will stop responding, followed shortly thereafter by the system as a whole, forcing a reboot. This smacks to me of a storage problem. Given that I have an SSD and not a regular magnetic HDD, what are my next steps, in both OS'? I haven't seen anything pertinent in Windows' event-log. I'm not sure of the equivalent place to look in OSX; it's never given me issue to find out. What are my options for attempting to save my data from the SSD to another drive, given that after some small amount of time (eg half an hour), the OS stops responding? What are the recommended next steps?

    Read the article

  • Issues with hard disk secure erase

    - by John Watson
    I want to completely wipe all the data and both OSes (Ubuntu and Windows 7) from my hard drive. I tried DBAN but it gives me an error and does not run. I am looking for an alternative. After reading some articles online, I came to know that, using a Linux live CD, it can be done using either of following commands. a) sudo dd if=/dev/zero of=/dev/sda b) sudo shred -vfz -n 1 /dev/sda My questions are 1) Which option (a or b) is more secure (wipes everything) and faster? 2) Does either of the options damage the hard drive or anything? I want to use hard drive again i.e. installing Windows and Ubuntu again.

    Read the article

  • Formatting a 5.25" floppy disk

    - by Spütnik
    So after the massive trouble of finding a 5.25" floppy drive and a connecting it up, then changing the BIOS so it's set as my A: drive, I tried to format a couple of high-density 1.2MB floppy disks using the "format A:" command in Command Prompt. Both times it formatted only 160KB and left it at that. If I then check the amount of space on those disks, it then comes up as 160KB. Why is this the case? How can I get my the full value out of my 1.2MB? For reference, I have a Mitsubishi MF504C-318UG, which should support 1.2MB disks.

    Read the article

  • copying corrupted images from a dvd.

    - by Pennf0lio
    Hi, Are there software you know that can copy images from a DVD? now the problem is there images in the DVD that are corrupt that I won't force to copy, If the software can recover the file and copy it that would be cool, If it cannot then skip the file. The dvd is kinda large and I don't want to sit and wait there. I want the DVD do the decision, If it can recover then recover if it cannot, then skip. And do you know other solution copying corrupt files? thanks!

    Read the article

  • saving data from a failing drive

    - by intuited
    An external 3½" HDD seems to be in danger of failing — it's making ticking sounds when idle. I've acquired a replacement drive, and want to know the best strategy to get the data off of the dubious drive with the best chance of saving as much as possible. There are some directories that are more important than others. However, I'm guessing that picking and choosing directories is going to reduce my chances of saving the whole thing. I would also have to mount it, dump a file listing, and then unmount it in order to be able to effectively prioritize directories. Adding in the fact that it's time-consuming to do this, I'm leaning away from this approach. I've considered just using dd, but I'm not sure how it would handle read errors or other problems that might prevent only certain parts of the data from being rescued, or which could be overcome with some retries, but not so many that they endanger other parts of the drive from being saved. I guess ideally it would do a single pass to get as much as possible and then go back to retry anything that was missed due to errors. Is it possible that copying more slowly — e.g. pausing every x MB/GB — would be better than just running the operation full tilt, for example to avoid any overheating issues? For the "where is your backup" crowd: this actually is my backup drive, but it also contains some non-critical and bulky stuff, like music, that aren't backups, i.e. aren't backed up. The drive has not exhibited any clear signs of failure other than this somewhat ominous sound. I did have to fsck a few errors recently — orphaned inodes, incorrect free blocks/inodes counts, inode bitmap differences, zero dtime on deleted inodes; about 20 errors in all. The filesystem of the partition is ext3.

    Read the article

  • How secure is cloud computing?

    - by Rhubarb
    By secure, I don't mean the machines itself and access to it from the network. I mean, and I suppose this could be applied to any kind of hosting service, when you put all your intellectual property onto a hosted provider, what happens to the hard disks as they cycle through them? Say I've invested million into my software, and the information and data that I have is valuable, how can I be sure it isn't read off old disks as they're recycled? Is there some kind of standard to look for that ensures a provider is going to use the strictest form of intellectual property protection? Is SAS70 applicable here?

    Read the article

  • Recover license for Photoshop CS3

    - by Buddy
    At the company I work at, an employee was let go. His laptop was a company laptop with Photoshop CS3 installed on it. Photoshop was deactivated so it could be installed on another computer. The license was bought online and emailed to someone, however, that computer crashed and the email with the license is lost. Is there a way to recover the license from the laptop? Are we better off contacting Adobe's customer support?

    Read the article

  • URGENT: help recovering lost data

    - by Niels Kristian
    I have made a directory: sudo mkdir /ssd, the directory was supposed to be mounted to a raid array called md3. This was done by adding /dev/md3 /ssd auto defaults 0 0 to fstab. Then after a while where I had used the directory, I realized that I had forgotten to run sudo mount -a - and then I did, and now the data is gone. I tried to uncomment the line in fstab and run sudo mount -a but that didn't get back my data. What can I do!? CONTENT OF FSTAB: proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md3 /ssd auto defaults 0 0

    Read the article

  • Changing filesystem types "safely"

    - by warren
    Back in Windows 95 OSR2 (I believe), there was a conversion tool that would take your extant FAT16 partition and change it to FAT32 non-destructively (most of the time). Are there any tools like that now for going from one file system type to another in situ without destroying the data? For example, from etx3 to ext4? Or NTFS to XFS?

    Read the article

  • How to save a ntfs partition which suddenly became empty

    - by SteveO
    One ntfs partition of my laptop was suddenly wiped out without any notice to me, when I rebooted from Windows 7 to Ubuntu 12.04 today. I am in need of help to save my files on that partition, which are important and unfortunately haven't been backed up yet. My laptop has two operating systems: Windows 7 and Ubuntu 12.04. with a ntfs partition shared between the two operating systems for storing some data files (109GB, about 97%of which has been used). I have almost always been using Ubuntu, but today I happened to have to work under Windows. Following is a record of what happened in the time order, numbering according to which operating system I was in at each stage. When I started into Windows 7, right before being able to log in, it took a while and two reboots to configure the Windows. I thought it was normal, since last time when I was using Windows two weeks ago, it took very long and several reboots to update Windows, since the last time I used Windows before then was in November last year. Then after finally being able to log in Windows 7, I installed Libre Office, MathType (I got it from http://dl.portablesoft.org/down/?id=2515, which I originally thought was a trial version, but later I learned was a cracked version and felt wrong. I made a copy of it at dropbox http://dl.dropbox.com/u/13029929/MathType_6.8_PortableSoft.rar, not for distributing it but to list it there just in case it will help to identify the problem), and MikTex. I then edited some .doc files in the ntfs partition under both Microsoft Office with MathType, and Libre Office. When I finished working under Windows and rebooted into Ubuntu, Ubuntu did some filesystem checking and reported that the ntfs partition was not able to be mounted. Then I rebooted again into Windows, and found that the ntfs partition had been emptied, i.e. all the data files were gone, and only one system file bootsqm.dat and one system directory System Volume Information were there, with their last updated time being the time when I first rebooted from Windows to Ubuntu (in fact, it is 4 hours in advanced than the actual time of that rebooting , see immediately below) Also I noticed that the time shown by Windows is not correct for my time zone (UTC-05:00) Eastern Time (US & Canada)), which is 4 hours in advance than the correct time (my current time is 3am, but the computer shows 7am). Same things happened when I rebooted into Ubuntu again: the ntfs has been emptied and left with only one Windows system file bootsqm.dat and one Windows system directory System Volume Information. the time shown by Ubuntu is 4 hours in advance than the correct time. I wonder what I can do to retrieve my data files back on the ntfs partition? If I am not able to do it myself, will some professionals be able to help me out? Thanks a lot! PS: I didn't think I did any thing that required emptying that partition. But there were quite some works I did during that stage right before the reboot from Windows to Ubuntu when the problem occured. Did I make any mis-operation?

    Read the article

  • Recovered video files won't play

    - by BioGeek
    I have an SD card with pictures and video which malfunctioned. I was able to recover the files with Photorec. The pictures are OK, but wen I try to open the vide files (*.mov extension) in get the following errors when I try to open them in the following programs Windows Media player: "Windows Media Player encountered a problem while playing the file" Quicktime: "Error -2048: Couldn't open the file because it is not a file that QuickTime understands" VLC: it shows the first frame of the video and the sound is just white noise The filesizes look correct so I presume the data is still in there. Is there any way to fix these recovered video files?

    Read the article

  • Recovering database files from a corrupted VHD

    - by Apocalypse9
    We have a SQL server hosted on a virtual machine. Our hosting company updated/restarted the server and for some reason the virtual machines became unbootable. We've spoken to Microsoft and used a few higher level tools to attempt to recover the virtual machines but were unsuccessful. In browsing the file system the database folder doesn't even appear. I'm wondering if there are any lower level tools that might be able to find and copy the database files. As far as I know the physical hard drive is ok, so I'm hoping there may be some way to recover the files themselves even if the rest of the virtual machine file-system is a loss. Obviously we're in a bit of a bind, and any help/ suggestions are very much appreciated.

    Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >